| #if ENABLE_FEATURE_SGI_LABEL |
| |
| /* |
| * Copyright (C) Andreas Neuper, Sep 1998. |
| * This file may be modified and redistributed under |
| * the terms of the GNU Public License. |
| */ |
| |
| #define SGI_VOLHDR 0x00 |
| /* 1 and 2 were used for drive types no longer supported by SGI */ |
| #define SGI_SWAP 0x03 |
| /* 4 and 5 were for filesystem types SGI haven't ever supported on MIPS CPUs */ |
| #define SGI_VOLUME 0x06 |
| #define SGI_EFS 0x07 |
| #define SGI_LVOL 0x08 |
| #define SGI_RLVOL 0x09 |
| #define SGI_XFS 0x0a |
| #define SGI_XFSLOG 0x0b |
| #define SGI_XLV 0x0c |
| #define SGI_XVM 0x0d |
| #define SGI_ENTIRE_DISK SGI_VOLUME |
| |
| struct device_parameter { /* 48 bytes */ |
| unsigned char skew; |
| unsigned char gap1; |
| unsigned char gap2; |
| unsigned char sparecyl; |
| unsigned short pcylcount; |
| unsigned short head_vol0; |
| unsigned short ntrks; /* tracks in cyl 0 or vol 0 */ |
| unsigned char cmd_tag_queue_depth; |
| unsigned char unused0; |
| unsigned short unused1; |
| unsigned short nsect; /* sectors/tracks in cyl 0 or vol 0 */ |
| unsigned short bytes; |
| unsigned short ilfact; |
| unsigned int flags; /* controller flags */ |
| unsigned int datarate; |
| unsigned int retries_on_error; |
| unsigned int ms_per_word; |
| unsigned short xylogics_gap1; |
| unsigned short xylogics_syncdelay; |
| unsigned short xylogics_readdelay; |
| unsigned short xylogics_gap2; |
| unsigned short xylogics_readgate; |
| unsigned short xylogics_writecont; |
| }; |
| |
| /* |
| * controller flags |
| */ |
| #define SECTOR_SLIP 0x01 |
| #define SECTOR_FWD 0x02 |
| #define TRACK_FWD 0x04 |
| #define TRACK_MULTIVOL 0x08 |
| #define IGNORE_ERRORS 0x10 |
| #define RESEEK 0x20 |
| #define ENABLE_CMDTAGQ 0x40 |
| |
| typedef struct { |
| unsigned int magic; /* expect SGI_LABEL_MAGIC */ |
| unsigned short boot_part; /* active boot partition */ |
| unsigned short swap_part; /* active swap partition */ |
| unsigned char boot_file[16]; /* name of the bootfile */ |
| struct device_parameter devparam; /* 1 * 48 bytes */ |
| struct volume_directory { /* 15 * 16 bytes */ |
| unsigned char vol_file_name[8]; /* a character array */ |
| unsigned int vol_file_start; /* number of logical block */ |
| unsigned int vol_file_size; /* number of bytes */ |
| } directory[15]; |
| struct sgi_partinfo { /* 16 * 12 bytes */ |
| unsigned int num_sectors; /* number of blocks */ |
| unsigned int start_sector; /* must be cylinder aligned */ |
| unsigned int id; |
| } partitions[16]; |
| unsigned int csum; |
| unsigned int fillbytes; |
| } sgi_partition; |
| |
| typedef struct { |
| unsigned int magic; /* looks like a magic number */ |
| unsigned int a2; |
| unsigned int a3; |
| unsigned int a4; |
| unsigned int b1; |
| unsigned short b2; |
| unsigned short b3; |
| unsigned int c[16]; |
| unsigned short d[3]; |
| unsigned char scsi_string[50]; |
| unsigned char serial[137]; |
| unsigned short check1816; |
| unsigned char installer[225]; |
| } sgiinfo; |
| |
| #define SGI_LABEL_MAGIC 0x0be5a941 |
| #define SGI_LABEL_MAGIC_SWAPPED 0x41a9e50b |
| #define SGI_INFO_MAGIC 0x00072959 |
| #define SGI_INFO_MAGIC_SWAPPED 0x59290700 |
| |
| #define SGI_SSWAP16(x) (sgi_other_endian ? fdisk_swap16(x) : (uint16_t)(x)) |
| #define SGI_SSWAP32(x) (sgi_other_endian ? fdisk_swap32(x) : (uint32_t)(x)) |
| |
| #define sgilabel ((sgi_partition *)MBRbuffer) |
| #define sgiparam (sgilabel->devparam) |
| |
| /* |
| * |
| * fdisksgilabel.c |
| * |
| * Copyright (C) Andreas Neuper, Sep 1998. |
| * This file may be modified and redistributed under |
| * the terms of the GNU Public License. |
| * |
| * Sat Mar 20 EST 1999 Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
| * Internationalization |
| */ |
| |
| |
| static int sgi_other_endian; |
| static int debug; |
| static short sgi_volumes = 1; |
| |
| /* |
| * only dealing with free blocks here |
| */ |
| |
| typedef struct { |
| unsigned int first; |
| unsigned int last; |
| } freeblocks; |
| static freeblocks freelist[17]; /* 16 partitions can produce 17 vacant slots */ |
| |
| static void |
| setfreelist(int i, unsigned int f, unsigned int l) |
| { |
| freelist[i].first = f; |
| freelist[i].last = l; |
| } |
| |
| static void |
| add2freelist(unsigned int f, unsigned int l) |
| { |
| int i; |
| for (i = 0; i < 17; i++) |
| if (freelist[i].last == 0) |
| break; |
| setfreelist(i, f, l); |
| } |
| |
| static void |
| clearfreelist(void) |
| { |
| int i; |
| |
| for (i = 0; i < 17; i++) |
| setfreelist(i, 0, 0); |
| } |
| |
| static unsigned int |
| isinfreelist(unsigned int b) |
| { |
| int i; |
| |
| for (i = 0; i < 17; i++) |
| if (freelist[i].first <= b && freelist[i].last >= b) |
| return freelist[i].last; |
| return 0; |
| } |
| /* return last vacant block of this stride (never 0). */ |
| /* the '>=' is not quite correct, but simplifies the code */ |
| /* |
| * end of free blocks section |
| */ |
| |
| static const char *const sgi_sys_types[] = { |
| /* SGI_VOLHDR */ "\x00" "SGI volhdr" , |
| /* 0x01 */ "\x01" "SGI trkrepl" , |
| /* 0x02 */ "\x02" "SGI secrepl" , |
| /* SGI_SWAP */ "\x03" "SGI raw" , |
| /* 0x04 */ "\x04" "SGI bsd" , |
| /* 0x05 */ "\x05" "SGI sysv" , |
| /* SGI_ENTIRE_DISK */ "\x06" "SGI volume" , |
| /* SGI_EFS */ "\x07" "SGI efs" , |
| /* 0x08 */ "\x08" "SGI lvol" , |
| /* 0x09 */ "\x09" "SGI rlvol" , |
| /* SGI_XFS */ "\x0a" "SGI xfs" , |
| /* SGI_XFSLOG */ "\x0b" "SGI xfslog" , |
| /* SGI_XLV */ "\x0c" "SGI xlv" , |
| /* SGI_XVM */ "\x0d" "SGI xvm" , |
| /* LINUX_SWAP */ "\x82" "Linux swap" , |
| /* LINUX_NATIVE */ "\x83" "Linux native", |
| /* LINUX_LVM */ "\x8d" "Linux LVM" , |
| /* LINUX_RAID */ "\xfd" "Linux RAID" , |
| NULL |
| }; |
| |
| |
| static int |
| sgi_get_nsect(void) |
| { |
| return SGI_SSWAP16(sgilabel->devparam.nsect); |
| } |
| |
| static int |
| sgi_get_ntrks(void) |
| { |
| return SGI_SSWAP16(sgilabel->devparam.ntrks); |
| } |
| |
| static unsigned int |
| two_s_complement_32bit_sum(unsigned int* base, int size /* in bytes */) |
| { |
| int i = 0; |
| unsigned int sum = 0; |
| |
| size /= sizeof(unsigned int); |
| for (i = 0; i < size; i++) |
| sum -= SGI_SSWAP32(base[i]); |
| return sum; |
| } |
| |
| void BUG_bad_sgi_partition_size(void); |
| |
| static int |
| check_sgi_label(void) |
| { |
| if (sizeof(sgi_partition) > 512) { |
| /* According to MIPS Computer Systems, Inc the label |
| * must not contain more than 512 bytes */ |
| BUG_bad_sgi_partition_size(); |
| } |
| |
| if (sgilabel->magic != SGI_LABEL_MAGIC |
| && sgilabel->magic != SGI_LABEL_MAGIC_SWAPPED |
| ) { |
| current_label_type = label_dos; |
| return 0; |
| } |
| |
| sgi_other_endian = (sgilabel->magic == SGI_LABEL_MAGIC_SWAPPED); |
| /* |
| * test for correct checksum |
| */ |
| if (two_s_complement_32bit_sum((unsigned int*)sgilabel, |
| sizeof(*sgilabel))) { |
| printf("Detected sgi disklabel with wrong checksum\n"); |
| } |
| update_units(); |
| current_label_type = label_sgi; |
| partitions = 16; |
| sgi_volumes = 15; |
| return 1; |
| } |
| |
| static unsigned int |
| sgi_get_start_sector(int i) |
| { |
| return SGI_SSWAP32(sgilabel->partitions[i].start_sector); |
| } |
| |
| static unsigned int |
| sgi_get_num_sectors(int i) |
| { |
| return SGI_SSWAP32(sgilabel->partitions[i].num_sectors); |
| } |
| |
| static int |
| sgi_get_sysid(int i) |
| { |
| return SGI_SSWAP32(sgilabel->partitions[i].id); |
| } |
| |
| static int |
| sgi_get_bootpartition(void) |
| { |
| return SGI_SSWAP16(sgilabel->boot_part); |
| } |
| |
| static int |
| sgi_get_swappartition(void) |
| { |
| return SGI_SSWAP16(sgilabel->swap_part); |
| } |
| |
| static void |
| sgi_list_table(int xtra) |
| { |
| int i, w, wd; |
| int kpi = 0; /* kernel partition ID */ |
| |
| if (xtra) { |
| printf("\nDisk %s (SGI disk label): %d heads, %d sectors\n" |
| "%d cylinders, %d physical cylinders\n" |
| "%d extra sects/cyl, interleave %d:1\n" |
| "%s\n" |
| "Units = %s of %d * 512 bytes\n\n", |
| disk_device, heads, sectors, cylinders, |
| SGI_SSWAP16(sgiparam.pcylcount), |
| SGI_SSWAP16(sgiparam.sparecyl), |
| SGI_SSWAP16(sgiparam.ilfact), |
| (char *)sgilabel, |
| str_units(PLURAL), units_per_sector); |
| } else { |
| printf("\nDisk %s (SGI disk label): " |
| "%d heads, %d sectors, %d cylinders\n" |
| "Units = %s of %d * 512 bytes\n\n", |
| disk_device, heads, sectors, cylinders, |
| str_units(PLURAL), units_per_sector ); |
| } |
| |
| w = strlen(disk_device); |
| wd = sizeof("Device") - 1; |
| if (w < wd) |
| w = wd; |
| |
| printf("----- partitions -----\n" |
| "Pt# %*s Info Start End Sectors Id System\n", |
| w + 2, "Device"); |
| for (i = 0; i < partitions; i++) { |
| if (sgi_get_num_sectors(i) || debug ) { |
| uint32_t start = sgi_get_start_sector(i); |
| uint32_t len = sgi_get_num_sectors(i); |
| kpi++; /* only count nonempty partitions */ |
| printf( |
| "%2d: %s %4s %9ld %9ld %9ld %2x %s\n", |
| /* fdisk part number */ i+1, |
| /* device */ partname(disk_device, kpi, w+3), |
| /* flags */ (sgi_get_swappartition() == i) ? "swap" : |
| /* flags */ (sgi_get_bootpartition() == i) ? "boot" : " ", |
| /* start */ (long) scround(start), |
| /* end */ (long) scround(start+len)-1, |
| /* no odd flag on end */(long) len, |
| /* type id */ sgi_get_sysid(i), |
| /* type name */ partition_type(sgi_get_sysid(i))); |
| } |
| } |
| printf("----- Bootinfo -----\nBootfile: %s\n" |
| "----- Directory Entries -----\n", |
| sgilabel->boot_file); |
| for (i = 0; i < sgi_volumes; i++) { |
| if (sgilabel->directory[i].vol_file_size) { |
| uint32_t start = SGI_SSWAP32(sgilabel->directory[i].vol_file_start); |
| uint32_t len = SGI_SSWAP32(sgilabel->directory[i].vol_file_size); |
| unsigned char *name = sgilabel->directory[i].vol_file_name; |
| |
| printf("%2d: %-10s sector%5u size%8u\n", |
| i, (char*)name, (unsigned int) start, (unsigned int) len); |
| } |
| } |
| } |
| |
| static void |
| sgi_set_bootpartition(int i) |
| { |
| sgilabel->boot_part = SGI_SSWAP16(((short)i)); |
| } |
| |
| static unsigned int |
| sgi_get_lastblock(void) |
| { |
| return heads * sectors * cylinders; |
| } |
| |
| static void |
| sgi_set_swappartition(int i) |
| { |
| sgilabel->swap_part = SGI_SSWAP16(((short)i)); |
| } |
| |
| static int |
| sgi_check_bootfile(const char* aFile) |
| { |
| if (strlen(aFile) < 3) /* "/a\n" is minimum */ { |
| printf("\nInvalid Bootfile!\n" |
| "\tThe bootfile must be an absolute non-zero pathname,\n" |
| "\te.g. \"/unix\" or \"/unix.save\".\n"); |
| return 0; |
| } |
| if (strlen(aFile) > 16) { |
| printf("\nName of Bootfile too long (>16 bytes)\n"); |
| return 0; |
| } |
| if (aFile[0] != '/') { |
| printf("\nBootfile must have a fully qualified pathname\n"); |
| return 0; |
| } |
| if (strncmp(aFile, (char*)sgilabel->boot_file, 16)) { |
| printf("\nBe aware, that the bootfile is not checked for existence.\n" |
| "\tSGI's default is \"/unix\" and for backup \"/unix.save\".\n"); |
| /* filename is correct and did change */ |
| return 1; |
| } |
| return 0; /* filename did not change */ |
| } |
| |
| static const char * |
| sgi_get_bootfile(void) |
| { |
| return (char*)sgilabel->boot_file; |
| } |
| |
| static void |
| sgi_set_bootfile(const char* aFile) |
| { |
| int i = 0; |
| |
| if (sgi_check_bootfile(aFile)) { |
| while (i < 16) { |
| if ((aFile[i] != '\n') /* in principle caught again by next line */ |
| && (strlen(aFile) > i)) |
| sgilabel->boot_file[i] = aFile[i]; |
| else |
| sgilabel->boot_file[i] = 0; |
| i++; |
| } |
| printf("\n\tBootfile is changed to \"%s\"\n", sgilabel->boot_file); |
| } |
| } |
| |
| static void |
| create_sgiinfo(void) |
| { |
| /* I keep SGI's habit to write the sgilabel to the second block */ |
| sgilabel->directory[0].vol_file_start = SGI_SSWAP32(2); |
| sgilabel->directory[0].vol_file_size = SGI_SSWAP32(sizeof(sgiinfo)); |
| strncpy((char*)sgilabel->directory[0].vol_file_name, "sgilabel", 8); |
| } |
| |
| static sgiinfo *fill_sgiinfo(void); |
| |
| static void |
| sgi_write_table(void) |
| { |
| sgilabel->csum = 0; |
| sgilabel->csum = SGI_SSWAP32(two_s_complement_32bit_sum( |
| (unsigned int*)sgilabel, sizeof(*sgilabel))); |
| assert(two_s_complement_32bit_sum( |
| (unsigned int*)sgilabel, sizeof(*sgilabel)) == 0); |
| |
| if (lseek(fd, 0, SEEK_SET) < 0) |
| fdisk_fatal(unable_to_seek); |
| if (write(fd, sgilabel, SECTOR_SIZE) != SECTOR_SIZE) |
| fdisk_fatal(unable_to_write); |
| if (!strncmp((char*)sgilabel->directory[0].vol_file_name, "sgilabel", 8)) { |
| /* |
| * keep this habit of first writing the "sgilabel". |
| * I never tested whether it works without (AN 981002). |
| */ |
| sgiinfo *info = fill_sgiinfo(); |
| int infostartblock = SGI_SSWAP32(sgilabel->directory[0].vol_file_start); |
| if (lseek(fd, infostartblock*SECTOR_SIZE, SEEK_SET) < 0) |
| fdisk_fatal(unable_to_seek); |
| if (write(fd, info, SECTOR_SIZE) != SECTOR_SIZE) |
| fdisk_fatal(unable_to_write); |
| free(info); |
| } |
| } |
| |
| static int |
| compare_start(int *x, int *y) |
| { |
| /* |
| * sort according to start sectors |
| * and prefers largest partition: |
| * entry zero is entire disk entry |
| */ |
| unsigned int i = *x; |
| unsigned int j = *y; |
| unsigned int a = sgi_get_start_sector(i); |
| unsigned int b = sgi_get_start_sector(j); |
| unsigned int c = sgi_get_num_sectors(i); |
| unsigned int d = sgi_get_num_sectors(j); |
| |
| if (a == b) |
| return (d > c) ? 1 : (d == c) ? 0 : -1; |
| return (a > b) ? 1 : -1; |
| } |
| |
| |
| static int |
| verify_sgi(int verbose) |
| { |
| int Index[16]; /* list of valid partitions */ |
| int sortcount = 0; /* number of used partitions, i.e. non-zero lengths */ |
| int entire = 0, i = 0; |
| unsigned int start = 0; |
| long long gap = 0; /* count unused blocks */ |
| unsigned int lastblock = sgi_get_lastblock(); |
| |
| clearfreelist(); |
| for (i = 0; i < 16; i++) { |
| if (sgi_get_num_sectors(i) != 0) { |
| Index[sortcount++] = i; |
| if (sgi_get_sysid(i) == SGI_ENTIRE_DISK) { |
| if (entire++ == 1) { |
| if (verbose) |
| printf("More than one entire disk entry present\n"); |
| } |
| } |
| } |
| } |
| if (sortcount == 0) { |
| if (verbose) |
| printf("No partitions defined\n"); |
| return (lastblock > 0) ? 1 : (lastblock == 0) ? 0 : -1; |
| } |
| qsort(Index, sortcount, sizeof(Index[0]), (void*)compare_start); |
| if (sgi_get_sysid(Index[0]) == SGI_ENTIRE_DISK) { |
| if ((Index[0] != 10) && verbose) |
| printf("IRIX likes when Partition 11 covers the entire disk\n"); |
| if ((sgi_get_start_sector(Index[0]) != 0) && verbose) |
| printf("The entire disk partition should start " |
| "at block 0,\n" |
| "not at diskblock %d\n", |
| sgi_get_start_sector(Index[0])); |
| if (debug) /* I do not understand how some disks fulfil it */ |
| if ((sgi_get_num_sectors(Index[0]) != lastblock) && verbose) |
| printf("The entire disk partition is only %d diskblock large,\n" |
| "but the disk is %d diskblocks long\n", |
| sgi_get_num_sectors(Index[0]), lastblock); |
| lastblock = sgi_get_num_sectors(Index[0]); |
| } else { |
| if (verbose) |
| printf("One Partition (#11) should cover the entire disk\n"); |
| if (debug > 2) |
| printf("sysid=%d\tpartition=%d\n", |
| sgi_get_sysid(Index[0]), Index[0]+1); |
| } |
| for (i = 1, start = 0; i < sortcount; i++) { |
| int cylsize = sgi_get_nsect() * sgi_get_ntrks(); |
| |
| if ((sgi_get_start_sector(Index[i]) % cylsize) != 0) { |
| if (debug) /* I do not understand how some disks fulfil it */ |
| if (verbose) |
| printf("Partition %d does not start on cylinder boundary\n", |
| Index[i]+1); |
| } |
| if (sgi_get_num_sectors(Index[i]) % cylsize != 0) { |
| if (debug) /* I do not understand how some disks fulfil it */ |
| if (verbose) |
| printf("Partition %d does not end on cylinder boundary\n", |
| Index[i]+1); |
| } |
| /* We cannot handle several "entire disk" entries. */ |
| if (sgi_get_sysid(Index[i]) == SGI_ENTIRE_DISK) continue; |
| if (start > sgi_get_start_sector(Index[i])) { |
| if (verbose) |
| printf("Partitions %d and %d overlap by %d sectors\n", |
| Index[i-1]+1, Index[i]+1, |
| start - sgi_get_start_sector(Index[i])); |
| if (gap > 0) gap = -gap; |
| if (gap == 0) gap = -1; |
| } |
| if (start < sgi_get_start_sector(Index[i])) { |
| if (verbose) |
| printf("Unused gap of %8u sectors - sectors %8u-%8u\n", |
| sgi_get_start_sector(Index[i]) - start, |
| start, sgi_get_start_sector(Index[i])-1); |
| gap += sgi_get_start_sector(Index[i]) - start; |
| add2freelist(start, sgi_get_start_sector(Index[i])); |
| } |
| start = sgi_get_start_sector(Index[i]) |
| + sgi_get_num_sectors(Index[i]); |
| if (debug > 1) { |
| if (verbose) |
| printf("%2d:%12d\t%12d\t%12d\n", Index[i], |
| sgi_get_start_sector(Index[i]), |
| sgi_get_num_sectors(Index[i]), |
| sgi_get_sysid(Index[i])); |
| } |
| } |
| if (start < lastblock) { |
| if (verbose) |
| printf("Unused gap of %8u sectors - sectors %8u-%8u\n", |
| lastblock - start, start, lastblock-1); |
| gap += lastblock - start; |
| add2freelist(start, lastblock); |
| } |
| /* |
| * Done with arithmetics |
| * Go for details now |
| */ |
| if (verbose) { |
| if (!sgi_get_num_sectors(sgi_get_bootpartition())) { |
| printf("\nThe boot partition does not exist\n"); |
| } |
| if (!sgi_get_num_sectors(sgi_get_swappartition())) { |
| printf("\nThe swap partition does not exist\n"); |
| } else { |
| if ((sgi_get_sysid(sgi_get_swappartition()) != SGI_SWAP) |
| && (sgi_get_sysid(sgi_get_swappartition()) != LINUX_SWAP)) |
| printf("\nThe swap partition has no swap type\n"); |
| } |
| if (sgi_check_bootfile("/unix")) |
| printf("\tYou have chosen an unusual boot file name\n"); |
| } |
| return (gap > 0) ? 1 : (gap == 0) ? 0 : -1; |
| } |
| |
| static int |
| sgi_gaps(void) |
| { |
| /* |
| * returned value is: |
| * = 0 : disk is properly filled to the rim |
| * < 0 : there is an overlap |
| * > 0 : there is still some vacant space |
| */ |
| return verify_sgi(0); |
| } |
| |
| static void |
| sgi_change_sysid(int i, int sys) |
| { |
| if (sgi_get_num_sectors(i) == 0) { /* caught already before, ... */ |
| printf("Sorry you may change the Tag of non-empty partitions\n"); |
| return; |
| } |
| if ((sys != SGI_ENTIRE_DISK) && (sys != SGI_VOLHDR) |
| && (sgi_get_start_sector(i) < 1) |
| ) { |
| read_maybe_empty( |
| "It is highly recommended that the partition at offset 0\n" |
| "is of type \"SGI volhdr\", the IRIX system will rely on it to\n" |
| "retrieve from its directory standalone tools like sash and fx.\n" |
| "Only the \"SGI volume\" entire disk section may violate this.\n" |
| "Type YES if you are sure about tagging this partition differently.\n"); |
| if (strcmp(line_ptr, "YES\n") != 0) |
| return; |
| } |
| sgilabel->partitions[i].id = SGI_SSWAP32(sys); |
| } |
| |
| /* returns partition index of first entry marked as entire disk */ |
| static int |
| sgi_entire(void) |
| { |
| int i; |
| |
| for (i = 0; i < 16; i++) |
| if (sgi_get_sysid(i) == SGI_VOLUME) |
| return i; |
| return -1; |
| } |
| |
| static void |
| sgi_set_partition(int i, unsigned int start, unsigned int length, int sys) |
| { |
| sgilabel->partitions[i].id = SGI_SSWAP32(sys); |
| sgilabel->partitions[i].num_sectors = SGI_SSWAP32(length); |
| sgilabel->partitions[i].start_sector = SGI_SSWAP32(start); |
| set_changed(i); |
| if (sgi_gaps() < 0) /* rebuild freelist */ |
| printf("Partition overlap detected\n"); |
| } |
| |
| static void |
| sgi_set_entire(void) |
| { |
| int n; |
| |
| for (n = 10; n < partitions; n++) { |
| if (!sgi_get_num_sectors(n) ) { |
| sgi_set_partition(n, 0, sgi_get_lastblock(), SGI_VOLUME); |
| break; |
| } |
| } |
| } |
| |
| static void |
| sgi_set_volhdr(void) |
| { |
| int n; |
| |
| for (n = 8; n < partitions; n++) { |
| if (!sgi_get_num_sectors(n)) { |
| /* |
| * 5 cylinders is an arbitrary value I like |
| * IRIX 5.3 stored files in the volume header |
| * (like sash, symmon, fx, ide) with ca. 3200 |
| * sectors. |
| */ |
| if (heads * sectors * 5 < sgi_get_lastblock()) |
| sgi_set_partition(n, 0, heads * sectors * 5, SGI_VOLHDR); |
| break; |
| } |
| } |
| } |
| |
| static void |
| sgi_delete_partition(int i) |
| { |
| sgi_set_partition(i, 0, 0, 0); |
| } |
| |
| static void |
| sgi_add_partition(int n, int sys) |
| { |
| char mesg[256]; |
| unsigned int first = 0, last = 0; |
| |
| if (n == 10) { |
| sys = SGI_VOLUME; |
| } else if (n == 8) { |
| sys = 0; |
| } |
| if (sgi_get_num_sectors(n)) { |
| printf(msg_part_already_defined, n + 1); |
| return; |
| } |
| if ((sgi_entire() == -1) && (sys != SGI_VOLUME)) { |
| printf("Attempting to generate entire disk entry automatically\n"); |
| sgi_set_entire(); |
| sgi_set_volhdr(); |
| } |
| if ((sgi_gaps() == 0) && (sys != SGI_VOLUME)) { |
| printf("The entire disk is already covered with partitions\n"); |
| return; |
| } |
| if (sgi_gaps() < 0) { |
| printf("You got a partition overlap on the disk. Fix it first!\n"); |
| return; |
| } |
| snprintf(mesg, sizeof(mesg), "First %s", str_units(SINGULAR)); |
| while (1) { |
| if (sys == SGI_VOLUME) { |
| last = sgi_get_lastblock(); |
| first = read_int(0, 0, last-1, 0, mesg); |
| if (first != 0) { |
| printf("It is highly recommended that eleventh partition\n" |
| "covers the entire disk and is of type 'SGI volume'\n"); |
| } |
| } else { |
| first = freelist[0].first; |
| last = freelist[0].last; |
| first = read_int(scround(first), scround(first), scround(last)-1, |
| 0, mesg); |
| } |
| if (display_in_cyl_units) |
| first *= units_per_sector; |
| else |
| first = first; /* align to cylinder if you know how ... */ |
| if (!last ) |
| last = isinfreelist(first); |
| if (last != 0) |
| break; |
| printf("You will get a partition overlap on the disk. " |
| "Fix it first!\n"); |
| } |
| snprintf(mesg, sizeof(mesg), " Last %s", str_units(SINGULAR)); |
| last = read_int(scround(first), scround(last)-1, scround(last)-1, |
| scround(first), mesg)+1; |
| if (display_in_cyl_units) |
| last *= units_per_sector; |
| else |
| last = last; /* align to cylinder if You know how ... */ |
| if ( (sys == SGI_VOLUME) && (first != 0 || last != sgi_get_lastblock() ) ) |
| printf("It is highly recommended that eleventh partition\n" |
| "covers the entire disk and is of type 'SGI volume'\n"); |
| sgi_set_partition(n, first, last-first, sys); |
| } |
| |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| static void |
| create_sgilabel(void) |
| { |
| struct hd_geometry geometry; |
| struct { |
| unsigned int start; |
| unsigned int nsect; |
| int sysid; |
| } old[4]; |
| int i = 0; |
| long longsectors; /* the number of sectors on the device */ |
| int res; /* the result from the ioctl */ |
| int sec_fac; /* the sector factor */ |
| |
| sec_fac = sector_size / 512; /* determine the sector factor */ |
| |
| printf(msg_building_new_label, "SGI disklabel"); |
| |
| sgi_other_endian = (BYTE_ORDER == LITTLE_ENDIAN); |
| res = ioctl(fd, BLKGETSIZE, &longsectors); |
| if (!ioctl(fd, HDIO_GETGEO, &geometry)) { |
| heads = geometry.heads; |
| sectors = geometry.sectors; |
| if (res == 0) { |
| /* the get device size ioctl was successful */ |
| cylinders = longsectors / (heads * sectors); |
| cylinders /= sec_fac; |
| } else { |
| /* otherwise print error and use truncated version */ |
| cylinders = geometry.cylinders; |
| printf( |
| "Warning: BLKGETSIZE ioctl failed on %s. Using geometry cylinder value of %d.\n" |
| "This value may be truncated for devices > 33.8 GB.\n", disk_device, cylinders); |
| } |
| } |
| for (i = 0; i < 4; i++) { |
| old[i].sysid = 0; |
| if (valid_part_table_flag(MBRbuffer)) { |
| if (get_part_table(i)->sys_ind) { |
| old[i].sysid = get_part_table(i)->sys_ind; |
| old[i].start = get_start_sect(get_part_table(i)); |
| old[i].nsect = get_nr_sects(get_part_table(i)); |
| printf("Trying to keep parameters of partition %d\n", i); |
| if (debug) |
| printf("ID=%02x\tSTART=%d\tLENGTH=%d\n", |
| old[i].sysid, old[i].start, old[i].nsect); |
| } |
| } |
| } |
| |
| memset(MBRbuffer, 0, sizeof(MBRbuffer)); |
| /* fields with '//' are already zeroed out by memset above */ |
| |
| sgilabel->magic = SGI_SSWAP32(SGI_LABEL_MAGIC); |
| //sgilabel->boot_part = SGI_SSWAP16(0); |
| sgilabel->swap_part = SGI_SSWAP16(1); |
| |
| //memset(sgilabel->boot_file, 0, 16); |
| strcpy((char*)sgilabel->boot_file, "/unix"); /* sizeof(sgilabel->boot_file) == 16 > 6 */ |
| |
| //sgilabel->devparam.skew = (0); |
| //sgilabel->devparam.gap1 = (0); |
| //sgilabel->devparam.gap2 = (0); |
| //sgilabel->devparam.sparecyl = (0); |
| sgilabel->devparam.pcylcount = SGI_SSWAP16(geometry.cylinders); |
| //sgilabel->devparam.head_vol0 = SGI_SSWAP16(0); |
| /* tracks/cylinder (heads) */ |
| sgilabel->devparam.ntrks = SGI_SSWAP16(geometry.heads); |
| //sgilabel->devparam.cmd_tag_queue_depth = (0); |
| //sgilabel->devparam.unused0 = (0); |
| //sgilabel->devparam.unused1 = SGI_SSWAP16(0); |
| /* sectors/track */ |
| sgilabel->devparam.nsect = SGI_SSWAP16(geometry.sectors); |
| sgilabel->devparam.bytes = SGI_SSWAP16(512); |
| sgilabel->devparam.ilfact = SGI_SSWAP16(1); |
| sgilabel->devparam.flags = SGI_SSWAP32(TRACK_FWD| |
| IGNORE_ERRORS|RESEEK); |
| //sgilabel->devparam.datarate = SGI_SSWAP32(0); |
| sgilabel->devparam.retries_on_error = SGI_SSWAP32(1); |
| //sgilabel->devparam.ms_per_word = SGI_SSWAP32(0); |
| //sgilabel->devparam.xylogics_gap1 = SGI_SSWAP16(0); |
| //sgilabel->devparam.xylogics_syncdelay = SGI_SSWAP16(0); |
| //sgilabel->devparam.xylogics_readdelay = SGI_SSWAP16(0); |
| //sgilabel->devparam.xylogics_gap2 = SGI_SSWAP16(0); |
| //sgilabel->devparam.xylogics_readgate = SGI_SSWAP16(0); |
| //sgilabel->devparam.xylogics_writecont = SGI_SSWAP16(0); |
| //memset( &(sgilabel->directory), 0, sizeof(struct volume_directory)*15 ); |
| //memset( &(sgilabel->partitions), 0, sizeof(struct sgi_partinfo)*16 ); |
| current_label_type = label_sgi; |
| partitions = 16; |
| sgi_volumes = 15; |
| sgi_set_entire(); |
| sgi_set_volhdr(); |
| for (i = 0; i < 4; i++) { |
| if (old[i].sysid) { |
| sgi_set_partition(i, old[i].start, old[i].nsect, old[i].sysid); |
| } |
| } |
| } |
| |
| static void |
| sgi_set_xcyl(void) |
| { |
| /* do nothing in the beginning */ |
| } |
| #endif /* FEATURE_FDISK_ADVANCED */ |
| |
| /* _____________________________________________________________ |
| */ |
| |
| static sgiinfo * |
| fill_sgiinfo(void) |
| { |
| sgiinfo *info = xzalloc(sizeof(sgiinfo)); |
| |
| info->magic = SGI_SSWAP32(SGI_INFO_MAGIC); |
| info->b1 = SGI_SSWAP32(-1); |
| info->b2 = SGI_SSWAP16(-1); |
| info->b3 = SGI_SSWAP16(1); |
| /* You may want to replace this string !!!!!!! */ |
| strcpy( (char*)info->scsi_string, "IBM OEM 0662S12 3 30" ); |
| strcpy( (char*)info->serial, "0000" ); |
| info->check1816 = SGI_SSWAP16(18*256 +16 ); |
| strcpy( (char*)info->installer, "Sfx version 5.3, Oct 18, 1994" ); |
| return info; |
| } |
| #endif /* SGI_LABEL */ |