| /* vi: set sw=4 ts=4: */ |
| /* |
| * ifup/ifdown for busybox |
| * Copyright (c) 2002 Glenn McGrath |
| * Copyright (c) 2003-2004 Erik Andersen <andersen@codepoet.org> |
| * |
| * Based on ifupdown v 0.6.4 by Anthony Towns |
| * Copyright (c) 1999 Anthony Towns <aj@azure.humbug.org.au> |
| * |
| * Changes to upstream version |
| * Remove checks for kernel version, assume kernel version 2.2.0 or better. |
| * Lines in the interfaces file cannot wrap. |
| * To adhere to the FHS, the default state file is /var/run/ifstate |
| * (defined via CONFIG_IFUPDOWN_IFSTATE_PATH) and can be overridden by build |
| * configuration. |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| //config:config IFUP |
| //config: bool "ifup (14 kb)" |
| //config: default y |
| //config: help |
| //config: Activate the specified interfaces. This applet makes use |
| //config: of either "ifconfig" and "route" or the "ip" command to actually |
| //config: configure network interfaces. Therefore, you will probably also want |
| //config: to enable either IFCONFIG and ROUTE, or enable |
| //config: FEATURE_IFUPDOWN_IP and the various IP options. Of |
| //config: course you could use non-busybox versions of these programs, so |
| //config: against my better judgement (since this will surely result in plenty |
| //config: of support questions on the mailing list), I do not force you to |
| //config: enable these additional options. It is up to you to supply either |
| //config: "ifconfig", "route" and "run-parts" or the "ip" command, either |
| //config: via busybox or via standalone utilities. |
| //config: |
| //config:config IFDOWN |
| //config: bool "ifdown (13 kb)" |
| //config: default y |
| //config: help |
| //config: Deactivate the specified interfaces. |
| //config: |
| //config:config IFUPDOWN_IFSTATE_PATH |
| //config: string "Absolute path to ifstate file" |
| //config: default "/var/run/ifstate" |
| //config: depends on IFUP || IFDOWN |
| //config: help |
| //config: ifupdown keeps state information in a file called ifstate. |
| //config: Typically it is located in /var/run/ifstate, however |
| //config: some distributions tend to put it in other places |
| //config: (debian, for example, uses /etc/network/run/ifstate). |
| //config: This config option defines location of ifstate. |
| //config: |
| //config:config FEATURE_IFUPDOWN_IP |
| //config: bool "Use ip tool (else ifconfig/route is used)" |
| //config: default y |
| //config: depends on IFUP || IFDOWN |
| //config: help |
| //config: Use the iproute "ip" command to implement "ifup" and "ifdown", rather |
| //config: than the default of using the older "ifconfig" and "route" utilities. |
| //config: |
| //config: If Y: you must install either the full-blown iproute2 package |
| //config: or enable "ip" applet in busybox, or the "ifup" and "ifdown" applets |
| //config: will not work. |
| //config: |
| //config: If N: you must install either the full-blown ifconfig and route |
| //config: utilities, or enable these applets in busybox. |
| //config: |
| //config:config FEATURE_IFUPDOWN_IPV4 |
| //config: bool "Support IPv4" |
| //config: default y |
| //config: depends on IFUP || IFDOWN |
| //config: help |
| //config: If you want ifup/ifdown to talk IPv4, leave this on. |
| //config: |
| //config:config FEATURE_IFUPDOWN_IPV6 |
| //config: bool "Support IPv6" |
| //config: default y |
| //config: depends on (IFUP || IFDOWN) && FEATURE_IPV6 |
| //config: help |
| //config: If you need support for IPv6, turn this option on. |
| //config: |
| //UNUSED: |
| ////////:config FEATURE_IFUPDOWN_IPX |
| ////////: bool "Support IPX" |
| ////////: default y |
| ////////: depends on IFUP || IFDOWN |
| ////////: help |
| ////////: If this option is selected you can use busybox to work with IPX |
| ////////: networks. |
| //config: |
| //config:config FEATURE_IFUPDOWN_MAPPING |
| //config: bool "Enable mapping support" |
| //config: default y |
| //config: depends on IFUP || IFDOWN |
| //config: help |
| //config: This enables support for the "mapping" stanza, unless you have |
| //config: a weird network setup you don't need it. |
| //config: |
| //config:config FEATURE_IFUPDOWN_EXTERNAL_DHCP |
| //config: bool "Support external DHCP clients" |
| //config: default n |
| //config: depends on IFUP || IFDOWN |
| //config: help |
| //config: This enables support for the external dhcp clients. Clients are |
| //config: tried in the following order: dhcpcd, dhclient, pump and udhcpc. |
| //config: Otherwise, if udhcpc applet is enabled, it is used. |
| //config: Otherwise, ifup/ifdown will have no support for DHCP. |
| |
| // APPLET_ODDNAME:name main location suid_type help |
| //applet:IF_IFUP( APPLET_ODDNAME(ifup, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifup)) |
| //applet:IF_IFDOWN(APPLET_ODDNAME(ifdown, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifdown)) |
| |
| //kbuild:lib-$(CONFIG_IFUP) += ifupdown.o |
| //kbuild:lib-$(CONFIG_IFDOWN) += ifupdown.o |
| |
| //usage:#define ifup_trivial_usage |
| //usage: "[-n"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] -a | IFACE..." |
| //usage:#define ifup_full_usage "\n\n" |
| //usage: " -a Configure all interfaces" |
| //usage: "\n -i FILE Use FILE instead of /etc/network/interfaces" |
| //usage: "\n -n Dry run" |
| //usage: IF_FEATURE_IFUPDOWN_MAPPING( |
| //usage: "\n (note: doesn't disable mappings)" |
| //usage: "\n -m Don't run any mappings" |
| //usage: ) |
| //usage: "\n -v Print out what would happen before doing it" |
| //usage: "\n -f Force" |
| //usage: |
| //usage:#define ifdown_trivial_usage |
| //usage: "[-n"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] -a | IFACE..." |
| //usage:#define ifdown_full_usage "\n\n" |
| //usage: " -a Deconfigure all interfaces" |
| //usage: "\n -i FILE Use FILE instead of /etc/network/interfaces" |
| //usage: "\n -n Dry run" |
| //usage: IF_FEATURE_IFUPDOWN_MAPPING( |
| //usage: "\n (note: doesn't disable mappings)" |
| //usage: "\n -m Don't run any mappings" |
| //usage: ) |
| //usage: "\n -v Print out what would happen before doing it" |
| //usage: "\n -f Force" |
| |
| #include <net/if.h> |
| #include "libbb.h" |
| #include "common_bufsiz.h" |
| /* After libbb.h, since it needs sys/types.h on some systems */ |
| #include <sys/utsname.h> |
| #include <fnmatch.h> |
| |
| #define MAX_OPT_DEPTH 10 |
| |
| #if ENABLE_FEATURE_IFUPDOWN_MAPPING |
| #define MAX_INTERFACE_LENGTH 10 |
| #endif |
| |
| #define UDHCPC_CMD_OPTIONS CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS |
| #define IFSTATE_FILE_PATH CONFIG_IFUPDOWN_IFSTATE_PATH |
| |
| #define debug_noise(args...) /*fprintf(stderr, args)*/ |
| |
| /* Forward declaration */ |
| struct interface_defn_t; |
| |
| typedef int execfn(char *command); |
| |
| struct method_t { |
| const char *name; |
| int (*up)(struct interface_defn_t *ifd, execfn *e) FAST_FUNC; |
| int (*down)(struct interface_defn_t *ifd, execfn *e) FAST_FUNC; |
| }; |
| |
| struct address_family_t { |
| const char *name; |
| int n_methods; |
| const struct method_t *method; |
| }; |
| |
| struct mapping_defn_t { |
| struct mapping_defn_t *next; |
| |
| int max_matches; |
| int n_matches; |
| char **match; |
| |
| char *script; |
| |
| int n_mappings; |
| char **mapping; |
| }; |
| |
| struct variable_t { |
| char *name; |
| char *value; |
| }; |
| |
| struct interface_defn_t { |
| const struct address_family_t *address_family; |
| const struct method_t *method; |
| |
| char *iface; |
| int n_options; |
| struct variable_t *option; |
| }; |
| |
| struct interfaces_file_t { |
| llist_t *autointerfaces; |
| llist_t *ifaces; |
| struct mapping_defn_t *mappings; |
| }; |
| |
| |
| #define OPTION_STR "anvf" IF_FEATURE_IFUPDOWN_MAPPING("m") "i:" |
| enum { |
| OPT_do_all = 0x1, |
| OPT_no_act = 0x2, |
| OPT_verbose = 0x4, |
| OPT_force = 0x8, |
| OPT_no_mappings = 0x10, |
| }; |
| #define DO_ALL (option_mask32 & OPT_do_all) |
| #define NO_ACT (option_mask32 & OPT_no_act) |
| #define VERBOSE (option_mask32 & OPT_verbose) |
| #define FORCE (option_mask32 & OPT_force) |
| #define NO_MAPPINGS (option_mask32 & OPT_no_mappings) |
| |
| |
| struct globals { |
| char **my_environ; |
| const char *startup_PATH; |
| char *shell; |
| } FIX_ALIASING; |
| #define G (*(struct globals*)bb_common_bufsiz1) |
| #define INIT_G() do { setup_common_bufsiz(); } while (0) |
| |
| |
| static const char keywords_up_down[] ALIGN1 = |
| "up\0" |
| "down\0" |
| "pre-up\0" |
| "post-down\0" |
| ; |
| |
| |
| #if ENABLE_FEATURE_IFUPDOWN_IPV4 || ENABLE_FEATURE_IFUPDOWN_IPV6 |
| |
| static void addstr(char **bufp, const char *str, size_t str_length) |
| { |
| /* xasprintf trick will be smaller, but we are often |
| * called with str_length == 1 - don't want to have |
| * THAT much of malloc/freeing! */ |
| char *buf = *bufp; |
| int len = (buf ? strlen(buf) : 0); |
| str_length++; |
| buf = xrealloc(buf, len + str_length); |
| /* copies at most str_length-1 chars! */ |
| safe_strncpy(buf + len, str, str_length); |
| *bufp = buf; |
| } |
| |
| static int strncmpz(const char *l, const char *r, size_t llen) |
| { |
| int i = strncmp(l, r, llen); |
| |
| if (i == 0) |
| return - (unsigned char)r[llen]; |
| return i; |
| } |
| |
| static char *get_var(const char *id, size_t idlen, struct interface_defn_t *ifd) |
| { |
| int i; |
| |
| if (strncmpz(id, "iface", idlen) == 0) { |
| // ubuntu's ifup doesn't do this: |
| //static char *label_buf; |
| //char *result; |
| //free(label_buf); |
| //label_buf = xstrdup(ifd->iface); |
| // Remove virtual iface suffix |
| //result = strchrnul(label_buf, ':'); |
| //*result = '\0'; |
| //return label_buf; |
| |
| return ifd->iface; |
| } |
| if (strncmpz(id, "label", idlen) == 0) { |
| return ifd->iface; |
| } |
| for (i = 0; i < ifd->n_options; i++) { |
| if (strncmpz(id, ifd->option[i].name, idlen) == 0) { |
| return ifd->option[i].value; |
| } |
| } |
| return NULL; |
| } |
| |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| static int count_netmask_bits(const char *dotted_quad) |
| { |
| // int result; |
| // unsigned a, b, c, d; |
| // /* Found a netmask... Check if it is dotted quad */ |
| // if (sscanf(dotted_quad, "%u.%u.%u.%u", &a, &b, &c, &d) != 4) |
| // return -1; |
| // if ((a|b|c|d) >> 8) |
| // return -1; /* one of numbers is >= 256 */ |
| // d |= (a << 24) | (b << 16) | (c << 8); /* IP */ |
| // d = ~d; /* 11110000 -> 00001111 */ |
| |
| /* Shorter version */ |
| int result; |
| struct in_addr ip; |
| unsigned d; |
| |
| if (inet_aton(dotted_quad, &ip) == 0) |
| return -1; /* malformed dotted IP */ |
| d = ntohl(ip.s_addr); /* IP in host order */ |
| d = ~d; /* 11110000 -> 00001111 */ |
| if (d & (d+1)) /* check that it is in 00001111 form */ |
| return -1; /* no it is not */ |
| result = 32; |
| while (d) { |
| d >>= 1; |
| result--; |
| } |
| return result; |
| } |
| # endif |
| |
| static char *parse(const char *command, struct interface_defn_t *ifd) |
| { |
| size_t old_pos[MAX_OPT_DEPTH] = { 0 }; |
| smallint okay[MAX_OPT_DEPTH] = { 1 }; |
| int opt_depth = 1; |
| char *result = NULL; |
| |
| while (*command) { |
| switch (*command) { |
| default: |
| addstr(&result, command, 1); |
| command++; |
| break; |
| case '\\': |
| if (command[1]) |
| command++; |
| addstr(&result, command, 1); |
| command++; |
| break; |
| case '[': |
| if (command[1] == '[' && opt_depth < MAX_OPT_DEPTH) { |
| old_pos[opt_depth] = result ? strlen(result) : 0; |
| okay[opt_depth] = 1; |
| opt_depth++; |
| command += 2; |
| } else { |
| addstr(&result, command, 1); |
| command++; |
| } |
| break; |
| case ']': |
| if (command[1] == ']' && opt_depth > 1) { |
| opt_depth--; |
| if (!okay[opt_depth]) { |
| result[old_pos[opt_depth]] = '\0'; |
| } |
| command += 2; |
| } else { |
| addstr(&result, command, 1); |
| command++; |
| } |
| break; |
| case '%': |
| { |
| char *nextpercent; |
| char *varvalue; |
| |
| command++; |
| nextpercent = strchr(command, '%'); |
| if (!nextpercent) { |
| /* Unterminated %var% */ |
| free(result); |
| return NULL; |
| } |
| |
| varvalue = get_var(command, nextpercent - command, ifd); |
| |
| if (varvalue) { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| /* "hwaddress <class> <address>": |
| * unlike ifconfig, ip doesnt want <class> |
| * (usually "ether" keyword). Skip it. */ |
| if (is_prefixed_with(command, "hwaddress")) { |
| varvalue = skip_whitespace(skip_non_whitespace(varvalue)); |
| } |
| # endif |
| addstr(&result, varvalue, strlen(varvalue)); |
| } else { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| /* Sigh... Add a special case for 'ip' to convert from |
| * dotted quad to bit count style netmasks. */ |
| if (is_prefixed_with(command, "bnmask")) { |
| unsigned res; |
| varvalue = get_var("netmask", 7, ifd); |
| if (varvalue) { |
| res = count_netmask_bits(varvalue); |
| if (res > 0) { |
| const char *argument = utoa(res); |
| addstr(&result, argument, strlen(argument)); |
| command = nextpercent + 1; |
| break; |
| } |
| } |
| } |
| # endif |
| okay[opt_depth - 1] = 0; |
| } |
| |
| command = nextpercent + 1; |
| } |
| break; |
| } |
| } |
| |
| if (opt_depth > 1) { |
| /* Unbalanced bracket */ |
| free(result); |
| return NULL; |
| } |
| |
| if (!okay[0]) { |
| /* Undefined variable and we aren't in a bracket */ |
| free(result); |
| return NULL; |
| } |
| |
| return result; |
| } |
| |
| /* execute() returns 1 for success and 0 for failure */ |
| static int execute(const char *command, struct interface_defn_t *ifd, execfn *exec) |
| { |
| char *out; |
| int ret; |
| |
| out = parse(command, ifd); |
| if (!out) { |
| /* parse error? */ |
| return 0; |
| } |
| /* out == "": parsed ok but not all needed variables known, skip */ |
| ret = out[0] ? (*exec)(out) : 1; |
| |
| free(out); |
| if (ret != 1) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| #endif /* FEATURE_IFUPDOWN_IPV4 || FEATURE_IFUPDOWN_IPV6 */ |
| |
| |
| #if ENABLE_FEATURE_IFUPDOWN_IPV6 |
| |
| static int FAST_FUNC loopback_up6(struct interface_defn_t *ifd, execfn *exec) |
| { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| int result; |
| result = execute("ip addr add ::1 dev %iface%", ifd, exec); |
| result += execute("ip link set %iface% up", ifd, exec); |
| return ((result == 2) ? 2 : 0); |
| # else |
| return execute("ifconfig %iface% add ::1", ifd, exec); |
| # endif |
| } |
| |
| static int FAST_FUNC loopback_down6(struct interface_defn_t *ifd, execfn *exec) |
| { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| return execute("ip link set %iface% down", ifd, exec); |
| # else |
| return execute("ifconfig %iface% del ::1", ifd, exec); |
| # endif |
| } |
| |
| static int FAST_FUNC manual_up_down6(struct interface_defn_t *ifd UNUSED_PARAM, execfn *exec UNUSED_PARAM) |
| { |
| return 1; |
| } |
| |
| static int FAST_FUNC static_up6(struct interface_defn_t *ifd, execfn *exec) |
| { |
| int result; |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| result = execute("ip addr add %address%/%netmask% dev %iface%[[ label %label%]]", ifd, exec); |
| result += execute("ip link set[[ mtu %mtu%]][[ addr %hwaddress%]] %iface% up", ifd, exec); |
| /* Reportedly, IPv6 needs "dev %iface%", but IPv4 does not: */ |
| result += execute("[[ip route add ::/0 via %gateway% dev %iface%]][[ metric %metric%]]", ifd, exec); |
| # else |
| result = execute("ifconfig %iface%[[ media %media%]][[ hw %hwaddress%]][[ mtu %mtu%]] up", ifd, exec); |
| result += execute("ifconfig %iface% add %address%/%netmask%", ifd, exec); |
| result += execute("[[route -A inet6 add ::/0 gw %gateway%[[ metric %metric%]]]]", ifd, exec); |
| # endif |
| return ((result == 3) ? 3 : 0); |
| } |
| |
| static int FAST_FUNC static_down6(struct interface_defn_t *ifd, execfn *exec) |
| { |
| if (!if_nametoindex(ifd->iface)) |
| return 1; /* already gone */ |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| return execute("ip link set %iface% down", ifd, exec); |
| # else |
| return execute("ifconfig %iface% down", ifd, exec); |
| # endif |
| } |
| |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| static int FAST_FUNC v4tunnel_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| int result; |
| result = execute("ip tunnel add %iface% mode sit remote " |
| "%endpoint%[[ local %local%]][[ ttl %ttl%]]", ifd, exec); |
| result += execute("ip link set %iface% up", ifd, exec); |
| result += execute("ip addr add %address%/%netmask% dev %iface%", ifd, exec); |
| /* Reportedly, IPv6 needs "dev %iface%", but IPv4 does not: */ |
| result += execute("[[ip route add ::/0 via %gateway% dev %iface%]]", ifd, exec); |
| return ((result == 4) ? 4 : 0); |
| } |
| |
| static int FAST_FUNC v4tunnel_down(struct interface_defn_t * ifd, execfn * exec) |
| { |
| return execute("ip tunnel del %iface%", ifd, exec); |
| } |
| # endif |
| |
| static const struct method_t methods6[] ALIGN_PTR = { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| { "v4tunnel" , v4tunnel_up , v4tunnel_down , }, |
| # endif |
| { "static" , static_up6 , static_down6 , }, |
| { "manual" , manual_up_down6 , manual_up_down6 , }, |
| { "loopback" , loopback_up6 , loopback_down6 , }, |
| }; |
| |
| static const struct address_family_t addr_inet6 = { |
| "inet6", |
| ARRAY_SIZE(methods6), |
| methods6 |
| }; |
| |
| #endif /* FEATURE_IFUPDOWN_IPV6 */ |
| |
| |
| #if ENABLE_FEATURE_IFUPDOWN_IPV4 |
| |
| static int FAST_FUNC loopback_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| int result; |
| result = execute("ip addr add 127.0.0.1/8 dev %iface%", ifd, exec); |
| result += execute("ip link set %iface% up", ifd, exec); |
| return ((result == 2) ? 2 : 0); |
| # else |
| return execute("ifconfig %iface% 127.0.0.1 up", ifd, exec); |
| # endif |
| } |
| |
| static int FAST_FUNC loopback_down(struct interface_defn_t *ifd, execfn *exec) |
| { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| int result; |
| result = execute("ip addr flush dev %iface%", ifd, exec); |
| result += execute("ip link set %iface% down", ifd, exec); |
| return ((result == 2) ? 2 : 0); |
| # else |
| return execute("ifconfig %iface% 127.0.0.1 down", ifd, exec); |
| # endif |
| } |
| |
| static int FAST_FUNC static_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| int result; |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| result = execute("ip addr add %address%/%bnmask%[[ broadcast %broadcast%]] " |
| "dev %iface%[[ peer %pointopoint%]][[ label %label%]]", ifd, exec); |
| result += execute("ip link set[[ mtu %mtu%]][[ addr %hwaddress%]] %iface% up", ifd, exec); |
| result += execute("[[ip route add default via %gateway% dev %iface%[[ metric %metric%]]]]", ifd, exec); |
| return ((result == 3) ? 3 : 0); |
| # else |
| /* ifconfig said to set iface up before it processes hw %hwaddress%, |
| * which then of course fails. Thus we run two separate ifconfig */ |
| result = execute("ifconfig %iface%[[ hw %hwaddress%]][[ media %media%]][[ mtu %mtu%]] up", |
| ifd, exec); |
| result += execute("ifconfig %iface% %address% netmask %netmask%" |
| "[[ broadcast %broadcast%]][[ pointopoint %pointopoint%]]", |
| ifd, exec); |
| result += execute("[[route add default gw %gateway%[[ metric %metric%]] %iface%]]", ifd, exec); |
| return ((result == 3) ? 3 : 0); |
| # endif |
| } |
| |
| static int FAST_FUNC static_down(struct interface_defn_t *ifd, execfn *exec) |
| { |
| int result; |
| |
| if (!if_nametoindex(ifd->iface)) |
| return 2; /* already gone */ |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| /* Optional "label LBL" is necessary if interface is an alias (eth0:0), |
| * otherwise "ip addr flush dev eth0:0" flushes all addresses on eth0. |
| */ |
| result = execute("ip addr flush dev %iface%[[ label %label%]]", ifd, exec); |
| result += execute("ip link set %iface% down", ifd, exec); |
| # else |
| /* result = execute("[[route del default gw %gateway% %iface%]]", ifd, exec); */ |
| /* Bringing the interface down deletes the routes in itself. |
| Otherwise this fails if we reference 'gateway' when using this from dhcp_down */ |
| result = 1; |
| result += execute("ifconfig %iface% down", ifd, exec); |
| # endif |
| return ((result == 2) ? 2 : 0); |
| } |
| |
| # if ENABLE_FEATURE_IFUPDOWN_EXTERNAL_DHCP |
| struct dhcp_client_t { |
| const char *name; |
| const char *startcmd; |
| const char *stopcmd; |
| }; |
| |
| static const struct dhcp_client_t ext_dhcp_clients[] ALIGN_PTR = { |
| { "dhcpcd", |
| "dhcpcd[[ -h %hostname%]][[ -i %vendor%]][[ -I %client%]][[ -l %leasetime%]] %iface%", |
| "dhcpcd -k %iface%", |
| }, |
| { "dhclient", |
| "dhclient -pf /var/run/dhclient.%iface%.pid %iface%", |
| "kill -9 `cat /var/run/dhclient.%iface%.pid` 2>/dev/null", |
| }, |
| { "pump", |
| "pump -i %iface%[[ -h %hostname%]][[ -l %leasehours%]]", |
| "pump -i %iface% -k", |
| }, |
| { "udhcpc", |
| "udhcpc " UDHCPC_CMD_OPTIONS " -p /var/run/udhcpc.%iface%.pid -i %iface%[[ -x hostname:%hostname%]][[ -c %client%]]" |
| "[[ -s %script%]][[ %udhcpc_opts%]]", |
| "kill `cat /var/run/udhcpc.%iface%.pid` 2>/dev/null", |
| }, |
| }; |
| # endif /* FEATURE_IFUPDOWN_EXTERNAL_DHCPC */ |
| |
| # if ENABLE_FEATURE_IFUPDOWN_EXTERNAL_DHCP |
| static int FAST_FUNC dhcp_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| unsigned i; |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| /* ip doesn't up iface when it configures it (unlike ifconfig) */ |
| if (!execute("ip link set[[ addr %hwaddress%]] %iface% up", ifd, exec)) |
| return 0; |
| # else |
| /* needed if we have hwaddress on dhcp iface */ |
| if (!execute("ifconfig %iface%[[ hw %hwaddress%]] up", ifd, exec)) |
| return 0; |
| # endif |
| for (i = 0; i < ARRAY_SIZE(ext_dhcp_clients); i++) { |
| if (executable_exists(ext_dhcp_clients[i].name)) |
| return execute(ext_dhcp_clients[i].startcmd, ifd, exec); |
| } |
| bb_simple_error_msg("no dhcp clients found"); |
| return 0; |
| } |
| # elif ENABLE_UDHCPC |
| static int FAST_FUNC dhcp_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| # if ENABLE_FEATURE_IFUPDOWN_IP |
| /* ip doesn't up iface when it configures it (unlike ifconfig) */ |
| if (!execute("ip link set[[ addr %hwaddress%]] %iface% up", ifd, exec)) |
| return 0; |
| # else |
| /* needed if we have hwaddress on dhcp iface */ |
| if (!execute("ifconfig %iface%[[ hw %hwaddress%]] up", ifd, exec)) |
| return 0; |
| # endif |
| return execute("udhcpc " UDHCPC_CMD_OPTIONS " -p /var/run/udhcpc.%iface%.pid " |
| "-i %iface%[[ -x hostname:%hostname%]][[ -c %client%]][[ -s %script%]][[ %udhcpc_opts%]]", |
| ifd, exec); |
| } |
| # else |
| static int FAST_FUNC dhcp_up(struct interface_defn_t *ifd UNUSED_PARAM, |
| execfn *exec UNUSED_PARAM) |
| { |
| return 0; /* no dhcp support */ |
| } |
| # endif |
| |
| # if ENABLE_FEATURE_IFUPDOWN_EXTERNAL_DHCP |
| static int FAST_FUNC dhcp_down(struct interface_defn_t *ifd, execfn *exec) |
| { |
| int result = 0; |
| unsigned i; |
| |
| for (i = 0; i < ARRAY_SIZE(ext_dhcp_clients); i++) { |
| if (executable_exists(ext_dhcp_clients[i].name)) { |
| result = execute(ext_dhcp_clients[i].stopcmd, ifd, exec); |
| if (result) |
| break; |
| } |
| } |
| |
| if (!result) |
| bb_simple_error_msg("warning: no dhcp clients found and stopped"); |
| |
| /* Sleep a bit, otherwise static_down tries to bring down interface too soon, |
| and it may come back up because udhcpc is still shutting down */ |
| usleep(100000); |
| result += static_down(ifd, exec); |
| return ((result == 3) ? 3 : 0); |
| } |
| # elif ENABLE_UDHCPC |
| static int FAST_FUNC dhcp_down(struct interface_defn_t *ifd, execfn *exec) |
| { |
| int result; |
| result = execute( |
| "test -f /var/run/udhcpc.%iface%.pid && " |
| "kill `cat /var/run/udhcpc.%iface%.pid` 2>/dev/null", |
| ifd, exec); |
| /* Also bring the hardware interface down since |
| killing the dhcp client alone doesn't do it. |
| This enables consecutive ifup->ifdown->ifup */ |
| /* Sleep a bit, otherwise static_down tries to bring down interface too soon, |
| and it may come back up because udhcpc is still shutting down */ |
| usleep(100000); |
| result += static_down(ifd, exec); |
| return ((result == 3) ? 3 : 0); |
| } |
| # else |
| static int FAST_FUNC dhcp_down(struct interface_defn_t *ifd UNUSED_PARAM, |
| execfn *exec UNUSED_PARAM) |
| { |
| return 0; /* no dhcp support */ |
| } |
| # endif |
| |
| static int FAST_FUNC manual_up_down(struct interface_defn_t *ifd UNUSED_PARAM, execfn *exec UNUSED_PARAM) |
| { |
| return 1; |
| } |
| |
| static int FAST_FUNC bootp_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| return execute("bootpc[[ --bootfile %bootfile%]] --dev %iface%" |
| "[[ --server %server%]][[ --hwaddr %hwaddr%]]" |
| " --returniffail --serverbcast", ifd, exec); |
| } |
| |
| static int FAST_FUNC ppp_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| return execute("pon[[ %provider%]]", ifd, exec); |
| } |
| |
| static int FAST_FUNC ppp_down(struct interface_defn_t *ifd, execfn *exec) |
| { |
| return execute("poff[[ %provider%]]", ifd, exec); |
| } |
| |
| static int FAST_FUNC wvdial_up(struct interface_defn_t *ifd, execfn *exec) |
| { |
| return execute("start-stop-daemon --start -x wvdial " |
| "-p /var/run/wvdial.%iface% -b -m --[[ %provider%]]", ifd, exec); |
| } |
| |
| static int FAST_FUNC wvdial_down(struct interface_defn_t *ifd, execfn *exec) |
| { |
| return execute("start-stop-daemon --stop -x wvdial " |
| "-p /var/run/wvdial.%iface% -s 2", ifd, exec); |
| } |
| |
| static const struct method_t methods[] ALIGN_PTR = { |
| { "manual" , manual_up_down, manual_up_down, }, |
| { "wvdial" , wvdial_up , wvdial_down , }, |
| { "ppp" , ppp_up , ppp_down , }, |
| { "static" , static_up , static_down , }, |
| { "bootp" , bootp_up , static_down , }, |
| { "dhcp" , dhcp_up , dhcp_down , }, |
| { "loopback", loopback_up , loopback_down , }, |
| }; |
| |
| static const struct address_family_t addr_inet = { |
| "inet", |
| ARRAY_SIZE(methods), |
| methods |
| }; |
| |
| #endif /* FEATURE_IFUPDOWN_IPV4 */ |
| |
| static int FAST_FUNC link_up_down(struct interface_defn_t *ifd UNUSED_PARAM, execfn *exec UNUSED_PARAM) |
| { |
| return 1; |
| } |
| |
| static const struct method_t link_methods[] ALIGN_PTR = { |
| { "none", link_up_down, link_up_down } |
| }; |
| |
| static const struct address_family_t addr_link = { |
| "link", ARRAY_SIZE(link_methods), link_methods |
| }; |
| |
| /* Returns pointer to the next word, or NULL. |
| * In 1st case, advances *buf to the word after this one. |
| */ |
| static char *next_word(char **buf) |
| { |
| unsigned length; |
| char *word; |
| |
| /* Skip over leading whitespace */ |
| word = skip_whitespace(*buf); |
| |
| /* Stop on EOL */ |
| if (*word == '\0') |
| return NULL; |
| |
| /* Find the length of this word (can't be 0) */ |
| length = strcspn(word, " \t\n"); |
| |
| /* Unless we are already at NUL, store NUL and advance */ |
| if (word[length] != '\0') |
| word[length++] = '\0'; |
| |
| *buf = skip_whitespace(word + length); |
| |
| return word; |
| } |
| |
| static const struct address_family_t *get_address_family(const struct address_family_t *const af[], char *name) |
| { |
| int i; |
| |
| if (!name) |
| return NULL; |
| |
| for (i = 0; af[i]; i++) { |
| if (strcmp(af[i]->name, name) == 0) { |
| return af[i]; |
| } |
| } |
| return NULL; |
| } |
| |
| static const struct method_t *get_method(const struct address_family_t *af, char *name) |
| { |
| int i; |
| |
| if (!name) |
| return NULL; |
| /* TODO: use index_in_str_array() */ |
| for (i = 0; i < af->n_methods; i++) { |
| if (strcmp(af->method[i].name, name) == 0) { |
| return &af->method[i]; |
| } |
| } |
| return NULL; |
| } |
| |
| static struct interfaces_file_t *read_interfaces(const char *filename, struct interfaces_file_t *defn) |
| { |
| /* Let's try to be compatible. |
| * |
| * "man 5 interfaces" says: |
| * Lines starting with "#" are ignored. Note that end-of-line |
| * comments are NOT supported, comments must be on a line of their own. |
| * A line may be extended across multiple lines by making |
| * the last character a backslash. |
| * |
| * Seen elsewhere in example config file: |
| * A first non-blank "#" character makes the rest of the line |
| * be ignored. Blank lines are ignored. Lines may be indented freely. |
| * A "\" character at the very end of the line indicates the next line |
| * should be treated as a continuation of the current one. |
| * |
| * Lines beginning with "source" are used to include stanzas from |
| * other files, so configuration can be split into many files. |
| * The word "source" is followed by the path of file to be sourced. |
| */ |
| #if ENABLE_FEATURE_IFUPDOWN_MAPPING |
| struct mapping_defn_t *currmap = NULL; |
| #endif |
| struct interface_defn_t *currif = NULL; |
| FILE *f; |
| char *buf; |
| char *first_word; |
| char *rest_of_line; |
| enum { NONE, IFACE, MAPPING } currently_processing = NONE; |
| |
| if (!defn) |
| defn = xzalloc(sizeof(*defn)); |
| |
| debug_noise("reading %s file:\n", filename); |
| f = xfopen_for_read(filename); |
| |
| while ((buf = xmalloc_fgetline(f)) != NULL) { |
| #if ENABLE_DESKTOP |
| /* Trailing "\" concatenates lines */ |
| char *p; |
| while ((p = last_char_is(buf, '\\')) != NULL) { |
| *p = '\0'; |
| rest_of_line = xmalloc_fgetline(f); |
| if (!rest_of_line) |
| break; |
| p = xasprintf("%s%s", buf, rest_of_line); |
| free(buf); |
| free(rest_of_line); |
| buf = p; |
| } |
| #endif |
| rest_of_line = buf; |
| first_word = next_word(&rest_of_line); |
| if (!first_word || *first_word == '#') { |
| free(buf); |
| continue; /* blank/comment line */ |
| } |
| |
| if (strcmp(first_word, "mapping") == 0) { |
| #if ENABLE_FEATURE_IFUPDOWN_MAPPING |
| currmap = xzalloc(sizeof(*currmap)); |
| |
| while ((first_word = next_word(&rest_of_line)) != NULL) { |
| currmap->match = xrealloc_vector(currmap->match, 4, currmap->n_matches); |
| currmap->match[currmap->n_matches++] = xstrdup(first_word); |
| } |
| /*currmap->n_mappings = 0;*/ |
| /*currmap->mapping = NULL;*/ |
| /*currmap->script = NULL;*/ |
| { |
| struct mapping_defn_t **where = &defn->mappings; |
| while (*where != NULL) { |
| where = &(*where)->next; |
| } |
| *where = currmap; |
| /*currmap->next = NULL;*/ |
| } |
| debug_noise("Added mapping\n"); |
| #endif |
| currently_processing = MAPPING; |
| } else if (strcmp(first_word, "iface") == 0) { |
| static const struct address_family_t *const addr_fams[] = { |
| #if ENABLE_FEATURE_IFUPDOWN_IPV4 |
| &addr_inet, |
| #endif |
| #if ENABLE_FEATURE_IFUPDOWN_IPV6 |
| &addr_inet6, |
| #endif |
| &addr_link, |
| NULL |
| }; |
| char *iface_name; |
| char *address_family_name; |
| char *method_name; |
| |
| currif = xzalloc(sizeof(*currif)); |
| iface_name = next_word(&rest_of_line); |
| address_family_name = next_word(&rest_of_line); |
| method_name = next_word(&rest_of_line); |
| |
| if (method_name == NULL) |
| bb_error_msg_and_die("too few parameters for line \"%s\"", buf); |
| |
| /* ship any trailing whitespace */ |
| rest_of_line = skip_whitespace(rest_of_line); |
| |
| if (rest_of_line[0] != '\0' /* && rest_of_line[0] != '#' */) |
| bb_error_msg_and_die("too many parameters \"%s\"", buf); |
| |
| currif->iface = xstrdup(iface_name); |
| |
| currif->address_family = get_address_family(addr_fams, address_family_name); |
| if (!currif->address_family) |
| bb_error_msg_and_die("unknown address type \"%s\"", address_family_name); |
| |
| currif->method = get_method(currif->address_family, method_name); |
| if (!currif->method) |
| bb_error_msg_and_die("unknown method \"%s\"", method_name); |
| #if 0 |
| // Allegedly, Debian allows a duplicate definition: |
| // iface eth0 inet static |
| // address 192.168.0.15 |
| // netmask 255.255.0.0 |
| // gateway 192.168.0.1 |
| // |
| // iface eth0 inet static |
| // address 10.0.0.1 |
| // netmask 255.255.255.0 |
| // |
| // This adds *two* addresses to eth0 (probably requires use of "ip", not "ifconfig" |
| // |
| llist_t *iface_list; |
| for (iface_list = defn->ifaces; iface_list; iface_list = iface_list->link) { |
| struct interface_defn_t *tmp = (struct interface_defn_t *) iface_list->data; |
| if ((strcmp(tmp->iface, currif->iface) == 0) |
| && (tmp->address_family == currif->address_family) |
| ) { |
| bb_error_msg_and_die("duplicate interface \"%s\"", tmp->iface); |
| } |
| } |
| #endif |
| llist_add_to_end(&(defn->ifaces), (char*)currif); |
| |
| debug_noise("iface %s %s %s\n", currif->iface, address_family_name, method_name); |
| currently_processing = IFACE; |
| } else if (strcmp(first_word, "auto") == 0) { |
| while ((first_word = next_word(&rest_of_line)) != NULL) { |
| |
| /* Check the interface isnt already listed */ |
| if (llist_find_str(defn->autointerfaces, first_word)) { |
| bb_perror_msg_and_die("interface declared auto twice \"%s\"", buf); |
| } |
| |
| /* Add the interface to the list */ |
| llist_add_to_end(&(defn->autointerfaces), xstrdup(first_word)); |
| debug_noise("\nauto %s\n", first_word); |
| } |
| currently_processing = NONE; |
| } else if (strcmp(first_word, "source") == 0) { |
| read_interfaces(next_word(&rest_of_line), defn); |
| } else if (is_prefixed_with(first_word, "source-dir")) { |
| const char *dirpath; |
| DIR *dir; |
| struct dirent *entry; |
| |
| dirpath = next_word(&rest_of_line); |
| dir = xopendir(dirpath); |
| while ((entry = readdir(dir)) != NULL) { |
| char *path; |
| if (entry->d_name[0] == '.') |
| continue; |
| path = concat_path_file(dirpath, entry->d_name); |
| read_interfaces(path, defn); |
| free(path); |
| } |
| closedir(dir); |
| } else { |
| switch (currently_processing) { |
| case IFACE: |
| if (rest_of_line[0] == '\0') |
| bb_error_msg_and_die("option with empty value \"%s\"", buf); |
| |
| if (strcmp(first_word, "post-up") == 0) |
| first_word += 5; /* "up" */ |
| else if (strcmp(first_word, "pre-down") == 0) |
| first_word += 4; /* "down" */ |
| |
| /* If not one of "up", "down",... words... */ |
| if (index_in_strings(keywords_up_down, first_word) < 0) { |
| int i; |
| for (i = 0; i < currif->n_options; i++) { |
| if (strcmp(currif->option[i].name, first_word) == 0) |
| bb_error_msg_and_die("duplicate option \"%s\"", buf); |
| } |
| } |
| debug_noise("\t%s=%s\n", first_word, rest_of_line); |
| currif->option = xrealloc_vector(currif->option, 4, currif->n_options); |
| currif->option[currif->n_options].name = xstrdup(first_word); |
| currif->option[currif->n_options].value = xstrdup(rest_of_line); |
| currif->n_options++; |
| break; |
| case MAPPING: |
| #if ENABLE_FEATURE_IFUPDOWN_MAPPING |
| if (strcmp(first_word, "script") == 0) { |
| if (currmap->script != NULL) |
| bb_error_msg_and_die("duplicate script in mapping \"%s\"", buf); |
| currmap->script = xstrdup(next_word(&rest_of_line)); |
| } else if (strcmp(first_word, "map") == 0) { |
| currmap->mapping = xrealloc_vector(currmap->mapping, 2, currmap->n_mappings); |
| currmap->mapping[currmap->n_mappings] = xstrdup(next_word(&rest_of_line)); |
| currmap->n_mappings++; |
| } else { |
| bb_error_msg_and_die("misplaced option \"%s\"", buf); |
| } |
| #endif |
| break; |
| case NONE: |
| default: |
| bb_error_msg_and_die("misplaced option \"%s\"", buf); |
| } |
| } |
| free(buf); |
| } /* while (fgets) */ |
| |
| if (ferror(f) != 0) { |
| /* ferror does NOT set errno! */ |
| bb_error_msg_and_die("%s: I/O error", filename); |
| } |
| fclose(f); |
| debug_noise("\ndone reading %s\n\n", filename); |
| |
| return defn; |
| } |
| |
| static char *setlocalenv(const char *format, const char *name, const char *value) |
| { |
| char *result; |
| char *dst; |
| char *src; |
| char c; |
| |
| result = xasprintf(format, name, value); |
| |
| for (dst = src = result; (c = *src) != '=' && c; src++) { |
| if (c == '-') |
| c = '_'; |
| if (c >= 'a' && c <= 'z') |
| c -= ('a' - 'A'); |
| if (isalnum(c) || c == '_') |
| *dst++ = c; |
| } |
| overlapping_strcpy(dst, src); |
| |
| return result; |
| } |
| |
| static void set_environ(struct interface_defn_t *iface, const char *mode, const char *opt) |
| { |
| int i; |
| char **pp; |
| |
| if (G.my_environ != NULL) { |
| for (pp = G.my_environ; *pp; pp++) { |
| free(*pp); |
| } |
| free(G.my_environ); |
| } |
| |
| /* note: last element will stay NULL: */ |
| G.my_environ = xzalloc(sizeof(char *) * (iface->n_options + 7)); |
| pp = G.my_environ; |
| |
| for (i = 0; i < iface->n_options; i++) { |
| if (index_in_strings(keywords_up_down, iface->option[i].name) >= 0) { |
| continue; |
| } |
| *pp++ = setlocalenv("IF_%s=%s", iface->option[i].name, iface->option[i].value); |
| } |
| |
| *pp++ = setlocalenv("%s=%s", "IFACE", iface->iface); |
| *pp++ = setlocalenv("%s=%s", "ADDRFAM", iface->address_family->name); |
| *pp++ = setlocalenv("%s=%s", "METHOD", iface->method->name); |
| *pp++ = setlocalenv("%s=%s", "MODE", mode); |
| *pp++ = setlocalenv("%s=%s", "PHASE", opt); |
| if (G.startup_PATH) |
| *pp++ = setlocalenv("%s=%s", "PATH", G.startup_PATH); |
| } |
| |
| static int doit(char *str) |
| { |
| if (option_mask32 & (OPT_no_act|OPT_verbose)) { |
| puts(str); |
| } |
| if (!(option_mask32 & OPT_no_act)) { |
| pid_t child; |
| int status; |
| |
| fflush_all(); |
| child = vfork(); |
| if (child < 0) /* failure */ |
| return 0; |
| if (child == 0) { /* child */ |
| execle(G.shell, G.shell, "-c", str, (char *) NULL, G.my_environ); |
| _exit(127); |
| } |
| safe_waitpid(child, &status, 0); |
| if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) { |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| static int execute_all(struct interface_defn_t *ifd, const char *opt) |
| { |
| /* 'opt' is always short, the longest value is "post-down". |
| * Can use on-stack buffer instead of xasprintf'ed one. |
| */ |
| char buf[sizeof("run-parts /etc/network/if-%s.d") |
| + sizeof("post-down") |
| /*paranoia:*/ + 8 |
| ]; |
| int i; |
| |
| for (i = 0; i < ifd->n_options; i++) { |
| if (strcmp(ifd->option[i].name, opt) == 0) { |
| if (!doit(ifd->option[i].value)) { |
| return 0; |
| } |
| } |
| } |
| |
| /* Tested on Debian Squeeze: "standard" ifup runs this without |
| * checking that directory exists. If it doesn't, run-parts |
| * complains, and this message _is_ annoyingly visible. |
| * Don't "fix" this (unless newer Debian does). |
| */ |
| sprintf(buf, "run-parts /etc/network/if-%s.d", opt); |
| return doit(buf); |
| } |
| |
| static int check(char *str) |
| { |
| return str != NULL; |
| } |
| |
| static int iface_up(struct interface_defn_t *iface) |
| { |
| if (!iface->method->up(iface, check)) return -1; |
| set_environ(iface, "start", "pre-up"); |
| if (!execute_all(iface, "pre-up")) return 0; |
| if (!iface->method->up(iface, doit)) return 0; |
| set_environ(iface, "start", "post-up"); |
| if (!execute_all(iface, "up")) return 0; |
| return 1; |
| } |
| |
| static int iface_down(struct interface_defn_t *iface) |
| { |
| if (!iface->method->down(iface, check)) return -1; |
| set_environ(iface, "stop", "pre-down"); |
| if (!execute_all(iface, "down")) return 0; |
| if (!iface->method->down(iface, doit)) return 0; |
| set_environ(iface, "stop", "post-down"); |
| if (!execute_all(iface, "post-down")) return 0; |
| return 1; |
| } |
| |
| #if ENABLE_FEATURE_IFUPDOWN_MAPPING |
| static int popen2(FILE **in, FILE **out, char *command, char *param) |
| { |
| char *argv[3] = { command, param, NULL }; |
| struct fd_pair infd, outfd; |
| pid_t pid; |
| |
| xpiped_pair(infd); |
| xpiped_pair(outfd); |
| |
| fflush_all(); |
| pid = xvfork(); |
| |
| if (pid == 0) { |
| /* Child */ |
| /* NB: close _first_, then move fds! */ |
| close(infd.wr); |
| close(outfd.rd); |
| xmove_fd(infd.rd, 0); |
| xmove_fd(outfd.wr, 1); |
| BB_EXECVP_or_die(argv); |
| } |
| /* parent */ |
| close(infd.rd); |
| close(outfd.wr); |
| *in = xfdopen_for_write(infd.wr); |
| *out = xfdopen_for_read(outfd.rd); |
| return pid; |
| } |
| |
| static char *run_mapping(char *physical, struct mapping_defn_t *map) |
| { |
| FILE *in, *out; |
| int i, status; |
| pid_t pid; |
| |
| char *logical = xstrdup(physical); |
| |
| /* Run the mapping script. Never fails. */ |
| pid = popen2(&in, &out, map->script, physical); |
| |
| /* Write mappings to stdin of mapping script. */ |
| for (i = 0; i < map->n_mappings; i++) { |
| fprintf(in, "%s\n", map->mapping[i]); |
| } |
| fclose(in); |
| safe_waitpid(pid, &status, 0); |
| |
| if (WIFEXITED(status) && WEXITSTATUS(status) == 0) { |
| /* If the mapping script exited successfully, try to |
| * grab a line of output and use that as the name of the |
| * logical interface. */ |
| char *new_logical = xmalloc_fgetline(out); |
| |
| if (new_logical) { |
| /* If we are able to read a line of output from the script, |
| * remove any trailing whitespace and use this value |
| * as the name of the logical interface. */ |
| char *pch = new_logical + strlen(new_logical) - 1; |
| |
| while (pch >= new_logical && isspace(*pch)) |
| *(pch--) = '\0'; |
| |
| free(logical); |
| logical = new_logical; |
| } |
| } |
| |
| fclose(out); |
| |
| return logical; |
| } |
| #endif /* FEATURE_IFUPDOWN_MAPPING */ |
| |
| static llist_t *find_iface_state(llist_t *state_list, const char *iface) |
| { |
| llist_t *search = state_list; |
| |
| while (search) { |
| char *after_iface = is_prefixed_with(search->data, iface); |
| if (after_iface |
| && *after_iface == '=' |
| ) { |
| return search; |
| } |
| search = search->link; |
| } |
| return NULL; |
| } |
| |
| /* read the previous state from the state file */ |
| static llist_t *read_iface_state(void) |
| { |
| llist_t *state_list = NULL; |
| FILE *state_fp = fopen_for_read(IFSTATE_FILE_PATH); |
| |
| if (state_fp) { |
| char *start, *end_ptr; |
| while ((start = xmalloc_fgets(state_fp)) != NULL) { |
| /* We should only need to check for a single character */ |
| end_ptr = start + strcspn(start, " \t\n"); |
| *end_ptr = '\0'; |
| llist_add_to(&state_list, start); |
| } |
| fclose(state_fp); |
| } |
| return state_list; |
| } |
| |
| /* read the previous state from the state file */ |
| static FILE *open_new_state_file(void) |
| { |
| int fd, flags, cnt; |
| |
| cnt = 0; |
| flags = (O_WRONLY | O_CREAT | O_EXCL); |
| for (;;) { |
| fd = open(IFSTATE_FILE_PATH".new", flags, 0666); |
| if (fd >= 0) |
| break; |
| if (errno != EEXIST |
| || flags == (O_WRONLY | O_CREAT | O_TRUNC) |
| ) { |
| bb_perror_msg_and_die("can't open '%s'", |
| IFSTATE_FILE_PATH".new"); |
| } |
| /* Someone else created the .new file */ |
| if (cnt > 30) { |
| /* Waited for 30*30/2 = 450 milliseconds, still EEXIST. |
| * Assuming a stale file, rewriting it. |
| */ |
| flags = (O_WRONLY | O_CREAT | O_TRUNC); |
| continue; |
| } |
| msleep(cnt); |
| cnt++; |
| } |
| |
| return xfdopen_for_write(fd); |
| } |
| |
| int ifupdown_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int ifupdown_main(int argc UNUSED_PARAM, char **argv) |
| { |
| int (*cmds)(struct interface_defn_t *); |
| struct interfaces_file_t *defn; |
| llist_t *target_list = NULL; |
| const char *interfaces = "/etc/network/interfaces"; |
| bool any_failures = 0; |
| |
| INIT_G(); |
| |
| G.startup_PATH = getenv("PATH"); |
| G.shell = xstrdup(get_shell_name()); |
| |
| if (ENABLE_IFUP |
| && (!ENABLE_IFDOWN || applet_name[2] == 'u') |
| ) { |
| /* ifup command */ |
| cmds = iface_up; |
| } else { |
| cmds = iface_down; |
| } |
| |
| getopt32(argv, OPTION_STR, &interfaces); |
| argv += optind; |
| if (argv[0]) { |
| if (DO_ALL) bb_show_usage(); |
| } else { |
| if (!DO_ALL) bb_show_usage(); |
| } |
| |
| defn = read_interfaces(interfaces, NULL); |
| |
| /* Create a list of interfaces to work on */ |
| if (DO_ALL) { |
| target_list = defn->autointerfaces; |
| } else { |
| llist_add_to_end(&target_list, argv[0]); |
| } |
| |
| /* Update the interfaces */ |
| while (target_list) { |
| llist_t *iface_list; |
| struct interface_defn_t *currif; |
| char *iface; |
| char *liface; |
| char *pch; |
| bool okay = 0; |
| int cmds_ret; |
| bool curr_failure = 0; |
| |
| iface = xstrdup(target_list->data); |
| target_list = target_list->link; |
| |
| pch = strchr(iface, '='); |
| if (pch) { |
| *pch = '\0'; |
| liface = xstrdup(pch + 1); |
| } else { |
| liface = xstrdup(iface); |
| } |
| |
| if (!FORCE) { |
| llist_t *state_list = read_iface_state(); |
| const llist_t *iface_state = find_iface_state(state_list, iface); |
| |
| if (cmds == iface_up) { |
| /* ifup */ |
| if (iface_state) { |
| bb_error_msg("interface %s already configured", iface); |
| goto next; |
| } |
| } else { |
| /* ifdown */ |
| if (!iface_state) { |
| bb_error_msg("interface %s not configured", iface); |
| goto next; |
| } |
| } |
| llist_free(state_list, free); |
| } |
| |
| #if ENABLE_FEATURE_IFUPDOWN_MAPPING |
| if ((cmds == iface_up) && !NO_MAPPINGS) { |
| struct mapping_defn_t *currmap; |
| |
| for (currmap = defn->mappings; currmap; currmap = currmap->next) { |
| int i; |
| for (i = 0; i < currmap->n_matches; i++) { |
| if (fnmatch(currmap->match[i], liface, 0) != 0) |
| continue; |
| if (VERBOSE) { |
| printf("Running mapping script %s on %s\n", currmap->script, liface); |
| } |
| liface = run_mapping(iface, currmap); |
| break; |
| } |
| } |
| } |
| #endif |
| |
| iface_list = defn->ifaces; |
| while (iface_list) { |
| currif = (struct interface_defn_t *) iface_list->data; |
| if (strcmp(liface, currif->iface) == 0) { |
| char *oldiface = currif->iface; |
| |
| okay = 1; |
| currif->iface = iface; |
| |
| debug_noise("\nConfiguring interface %s (%s)\n", liface, currif->address_family->name); |
| |
| /* Call the cmds function pointer, does either iface_up() or iface_down() */ |
| cmds_ret = cmds(currif); |
| if (cmds_ret == -1) { |
| bb_error_msg("don't have all variables for %s/%s", |
| liface, currif->address_family->name); |
| any_failures = curr_failure = 1; |
| } else if (cmds_ret == 0) { |
| any_failures = curr_failure = 1; |
| } |
| |
| currif->iface = oldiface; |
| } |
| iface_list = iface_list->link; |
| } |
| if (VERBOSE) { |
| bb_putchar('\n'); |
| } |
| |
| if (!okay && !FORCE) { |
| bb_error_msg("ignoring unknown interface %s", liface); |
| any_failures = 1; |
| } else if (!NO_ACT) { |
| /* update the state file */ |
| FILE *new_state_fp = open_new_state_file(); |
| llist_t *state; |
| llist_t *state_list = read_iface_state(); |
| llist_t *iface_state = find_iface_state(state_list, iface); |
| |
| if (cmds == iface_up && !curr_failure) { |
| char *newiface = xasprintf("%s=%s", iface, liface); |
| if (!iface_state) { |
| llist_add_to_end(&state_list, newiface); |
| } else { |
| free(iface_state->data); |
| iface_state->data = newiface; |
| } |
| } else { |
| /* Remove an interface from state_list */ |
| llist_unlink(&state_list, iface_state); |
| free(llist_pop(&iface_state)); |
| } |
| |
| /* Actually write the new state */ |
| state = state_list; |
| while (state) { |
| if (state->data) { |
| fprintf(new_state_fp, "%s\n", state->data); |
| } |
| state = state->link; |
| } |
| fclose(new_state_fp); |
| xrename(IFSTATE_FILE_PATH".new", IFSTATE_FILE_PATH); |
| llist_free(state_list, free); |
| } |
| next: |
| free(iface); |
| free(liface); |
| } |
| |
| return any_failures; |
| } |