| # |
| # For a description of the syntax of this configuration file, |
| # see scripts/kbuild/config-language.txt. |
| # |
| |
| menu "Linux System Utilities" |
| |
| config CONFIG_DMESG |
| bool "dmesg" |
| default n |
| help |
| dmesg is used to examine or control the kernel ring buffer. When the |
| Linux kernel prints messages to the system log, they are stored in |
| the kernel ring buffer. You can use dmesg to print the kernel's ring |
| buffer, clear the kernel ring buffer, change the size of the kernel |
| ring buffer, and change the priority level at which kernel messages |
| are also logged to the system console. Enable this option if you |
| wish to enable the 'dmesg' utility. |
| |
| config CONFIG_FBSET |
| bool "fbset" |
| default n |
| help |
| fbset is used to show or change the settings of a Linux frame buffer |
| device. The frame buffer device provides a simple and unique |
| interface to access a graphics display. Enable this option |
| if you wish to enable the 'fbset' utility. |
| |
| config CONFIG_FEATURE_FBSET_FANCY |
| bool "Turn on extra fbset options" |
| default n |
| depends on CONFIG_FBSET |
| help |
| This option enables extended fbset options, allowing one to set the |
| framebuffer size, color depth, etc. interface to access a graphics |
| display. Enable this option if you wish to enable extended fbset |
| options. |
| |
| config CONFIG_FEATURE_FBSET_READMODE |
| bool "Turn on fbset readmode support" |
| default n |
| depends on CONFIG_FBSET |
| help |
| This option allows fbset to read the video mode database stored by |
| default as /etc/fb.modes, which can be used to set frame buffer |
| device to pre-defined video modes. |
| |
| config CONFIG_FDFLUSH |
| bool "fdflush" |
| default n |
| help |
| fdflush is only needed when changing media on slightly-broken |
| removable media drives. It is used to make Linux believe that a |
| hardware disk-change switch has been actuated, which causes Linux to |
| forget anything it has cached from the previous media. If you have |
| such a slightly-broken drive, you will need to run fdflush every time |
| you change a disk. Most people have working hardware and can safely |
| leave this disabled. |
| |
| config CONFIG_FDFORMAT |
| bool "fdformat" |
| default n |
| help |
| fdformat is used to low-level format a floppy disk. |
| |
| config CONFIG_FDISK |
| bool "fdisk" |
| default n |
| help |
| The fdisk utility is used to divide hard disks into one or more |
| logical disks, which are generally called partitions. This utility |
| can be used to list and edit the set of partitions or BSD style |
| 'disk slices' that are defined on a hard drive. |
| |
| config FDISK_SUPPORT_LARGE_DISKS |
| bool "support over 4GB disks" |
| default y |
| depends on CONFIG_FDISK |
| help |
| Enable this option to support large disks > 4GB. |
| |
| config CONFIG_FEATURE_FDISK_WRITABLE |
| bool "Write support" |
| default y |
| depends on CONFIG_FDISK |
| help |
| Enabling this option allows you to create or change a partition table |
| and write those changes out to disk. If you leave this option |
| disabled, you will only be able to view the partition table. |
| |
| config CONFIG_FEATURE_AIX_LABEL |
| bool "Support AIX disklabels" |
| default n |
| depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE |
| help |
| Enabling this option allows you to create or change AIX disklabels. |
| Most people can safely leave this option disabled. |
| |
| config CONFIG_FEATURE_SGI_LABEL |
| bool "Support SGI disklabels" |
| default n |
| depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE |
| help |
| Enabling this option allows you to create or change SGI disklabels. |
| Most people can safely leave this option disabled. |
| |
| config CONFIG_FEATURE_SUN_LABEL |
| bool "Support SUN disklabels" |
| default n |
| depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE |
| help |
| Enabling this option allows you to create or change SUN disklabels. |
| Most people can safely leave this option disabled. |
| |
| config CONFIG_FEATURE_OSF_LABEL |
| bool "Support BSD disklabels" |
| default n |
| depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE |
| help |
| Enabling this option allows you to create or change BSD disklabels |
| and define and edit BSD disk slices. |
| |
| config CONFIG_FEATURE_FDISK_ADVANCED |
| bool "Support expert mode" |
| default n |
| depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE |
| help |
| Enabling this option allows you to do terribly unsafe things like |
| define arbitrary drive geometry, move the beginning of data in a |
| partition, and similarly evil things. Unless you have a very good |
| reason you would be wise to leave this disabled. |
| |
| config CONFIG_FREERAMDISK |
| bool "freeramdisk" |
| default n |
| help |
| Linux allows you to create ramdisks. This utility allows you to |
| delete them and completely free all memory that was used for the |
| ramdisk. For example, if you boot Linux into a ramdisk and later |
| pivot_root, you may want to free the memory that is allocated to the |
| ramdisk. If you have no use for freeing memory from a ramdisk, leave |
| this disabled. |
| |
| config CONFIG_FSCK_MINIX |
| bool "fsck_minix" |
| default n |
| help |
| The minix filesystem is a nice, small, compact, read-write filesystem |
| with little overhead. It is not a journaling filesystem however and |
| can experience corruption if it is not properly unmounted or if the |
| power goes off in the middle of a write. This utility allows you to |
| check for and attempt to repair any corruption that occurs to a minix |
| filesystem. |
| |
| config CONFIG_MKFS_MINIX |
| bool "mkfs_minix" |
| default n |
| help |
| The minix filesystem is a nice, small, compact, read-write filesystem |
| with little overhead. If you wish to be able to create minix filesystems |
| this utility will do the job for you. |
| |
| comment "Minix filesystem support" |
| depends on CONFIG_FSCK_MINIX || CONFIG_MKFS_MINIX |
| |
| config CONFIG_FEATURE_MINIX2 |
| bool "Support Minix fs v2 (fsck_minix/mkfs_minix)" |
| default y |
| depends on CONFIG_FSCK_MINIX || CONFIG_MKFS_MINIX |
| help |
| If you wish to be able to create version 2 minix filesystems, enable this. |
| If you enabled 'mkfs_minix' then you almost certainly want to be using the |
| version 2 filesystem support. |
| |
| config CONFIG_GETOPT |
| bool "getopt" |
| default n |
| help |
| The getopt utility is used to break up (parse) options in command |
| lines to make it easy to write complex shell scripts that also check |
| for legal (and illegal) options. If you want to write horribly |
| complex shell scripts, or use some horribly complex shell script |
| written by others, this utility may be for you. Most people will |
| wisely leave this disabled. |
| |
| config CONFIG_HEXDUMP |
| bool "hexdump" |
| default n |
| help |
| The hexdump utility is used to display binary data in a readable |
| way that is comparable to the output from most hex editors. |
| |
| config CONFIG_HWCLOCK |
| bool "hwclock" |
| default n |
| help |
| The hwclock utility is used to read and set the hardware clock |
| on a system. This is primarily used to set the current time on |
| shutdown in the hardware clock, so the hardware will keep the |
| correct time when Linux is _not_ running. |
| |
| config CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS |
| bool "Support long options (--hctosys,...)" |
| default n |
| depends on CONFIG_HWCLOCK && CONFIG_GETOPT_LONG |
| help |
| By default, the hwclock utility only uses short options. If you |
| are overly fond of its long options, such as --hctosys, --utc, etc) |
| then enable this option. |
| |
| config CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS |
| bool "Use FHS /var/lib/hwclock/adjtime" |
| default y |
| depends on CONFIG_HWCLOCK |
| help |
| Starting with FHS 2.3, the adjtime state file is supposed to exist |
| at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish |
| to use the FHS behavior, answer Y here, otherwise answer N for the |
| classic /etc/adjtime path. |
| |
| http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO |
| |
| config CONFIG_IPCRM |
| bool "ipcrm" |
| default n |
| select CONFIG_FEATURE_SUID |
| help |
| The ipcrm utility allows the removal of System V interprocess |
| communication (IPC) objects and the associated data structures |
| from the system. |
| |
| config CONFIG_IPCS |
| bool "ipcs" |
| default n |
| select CONFIG_FEATURE_SUID |
| help |
| The ipcs utility is used to provide information on the currently |
| allocated System V interprocess (IPC) objects in the system. |
| |
| config CONFIG_LOSETUP |
| bool "losetup" |
| default n |
| help |
| losetup is used to associate or detach a loop device with a regular |
| file or block device, and to query the status of a loop device. This |
| version does not currently support enabling data encryption. |
| |
| config CONFIG_MDEV |
| bool "mdev" |
| default n |
| help |
| mdev is a mini-udev implementation: call it with -s to populate |
| /dev from /sys, then "echo /sbin/mdev > /proc/sys/kernel/hotplug" to |
| have it handle hotplug events afterwards. Device names are taken |
| from sysfs. |
| |
| config CONFIG_FEATURE_MDEV_CONF |
| bool "Support /etc/mdev.conf" |
| default n |
| depends on CONFIG_MDEV |
| help |
| The mdev config file contains lines that look like: |
| |
| hd[a-z][0-9]* 0:3 660 |
| |
| That's device name (with regex match), uid:gid, and permissions. |
| |
| Optionally, that can be followed (on the same line) by an asterisk |
| and a command line to run after creating the corresponding device(s), |
| ala: |
| |
| hdc root:cdrom 660 *ln -s hdc cdrom |
| |
| Config file parsing stops on the first matching line. If no config |
| entry is matched, devices are created with default 0:0 660. (Make |
| the last line match .* to override this.) |
| |
| config CONFIG_MKSWAP |
| bool "mkswap" |
| default n |
| help |
| The mkswap utility is used to configure a file or disk partition as |
| Linux swap space. This allows Linux to use the entire file or |
| partition as if it were additional RAM, which can greatly increase |
| the capability of low-memory machines. This additional memory is |
| much slower than real RAM, but can be very helpful at preventing your |
| applications being killed by the Linux out of memory (OOM) killer. |
| Once you have created swap space using 'mkswap' you need to enable |
| the swap space using the 'swapon' utility. |
| |
| config CONFIG_FEATURE_MKSWAP_V0 |
| bool "version 0 support" |
| default n |
| depends on CONFIG_MKSWAP |
| # depends on CONFIG_MKSWAP && CONFIG_DEPRECATED |
| help |
| Enable support for the old v0 style. |
| If your kernel is older than 2.1.117, then v0 support is the |
| only option. |
| |
| config CONFIG_MORE |
| bool "more" |
| default n |
| help |
| more is a simple utility which allows you to read text one screen |
| sized page at a time. If you want to read text that is larger than |
| the screen, and you are using anything faster than a 300 baud modem, |
| you will probably find this utility very helpful. If you don't have |
| any need to reading text files, you can leave this disabled. |
| |
| config CONFIG_FEATURE_USE_TERMIOS |
| bool "Use termios to manipulate the screen" |
| default y |
| depends on CONFIG_MORE |
| help |
| This option allows utilities such as 'more' and 'top' to determine |
| the size of the screen. If you leave this disabled, your utilities |
| that display things on the screen will be especially primitive and |
| will be unable to determine the current screen size, and will be |
| unable to move the cursor. |
| |
| config CONFIG_MOUNT |
| bool "mount" |
| default n |
| help |
| All files and filesystems in Unix are arranged into one big directory |
| tree. The 'mount' utility is used to graft a filesystem onto a |
| particular part of the tree. A filesystem can either live on a block |
| device, or it can be accessible over the network, as is the case with |
| NFS filesystems. Most people using BusyBox will also want to enable |
| the 'mount' utility. |
| |
| config CONFIG_FEATURE_MOUNT_NFS |
| bool "Support mounting NFS file systems" |
| default n |
| depends on CONFIG_MOUNT |
| help |
| Enable mounting of NFS file systems. |
| |
| config CONFIG_PIVOT_ROOT |
| bool "pivot_root" |
| default n |
| help |
| The pivot_root utility swaps the mount points for the root filesystem |
| with some other mounted filesystem. This allows you to do all sorts |
| of wild and crazy things with your Linux system and is far more |
| powerful than 'chroot'. |
| |
| Note: This is for initrd in linux 2.4. Under initramfs (introduced |
| in linux 2.6) use switch_root instead. |
| |
| config CONFIG_RDATE |
| bool "rdate" |
| default n |
| help |
| The rdate utility allows you to synchronize the date and time of your |
| system clock with the date and time of a remote networked system using |
| the RFC868 protocol, which is built into the inetd daemon on most |
| systems. |
| |
| config CONFIG_READPROFILE |
| bool "readprofile" |
| default n |
| help |
| This allows you to parse /proc/profile for basic profiling. |
| |
| config CONFIG_SETARCH |
| bool "setarch" |
| default n |
| help |
| The linux32 utility is used to create a 32bit environment for the |
| specified program (usually a shell). It only makes sense to have |
| this util on a system that supports both 64bit and 32bit userland |
| (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...). |
| |
| config CONFIG_SWAPONOFF |
| bool "swaponoff" |
| default n |
| help |
| This option enables both the 'swapon' and the 'swapoff' utilities. |
| Once you have created some swap space using 'mkswap', you also need |
| to enable your swap space with the 'swapon' utility. The 'swapoff' |
| utility is used, typically at system shutdown, to disable any swap |
| space. If you are not using any swap space, you can leave this |
| option disabled. |
| |
| config CONFIG_SWITCH_ROOT |
| bool "switch_root" |
| default n |
| help |
| The switch_root utility is used from initramfs to select a new |
| root device. Under initramfs, you have to use this instead of |
| pivot_root. (Stop reading here if you don't care why.) |
| |
| Booting with initramfs extracts a gzipped cpio archive into rootfs |
| (which is a variant of ramfs/tmpfs). Because rootfs can't be moved |
| or unmounted*, pivot_root will not work from initramfs. Instead, |
| switch_root deletes everything out of rootfs (including itself), |
| does a mount --move that overmounts rootfs with the new root, and |
| then execs the specified init program. |
| |
| * Because the Linux kernel uses rootfs internally as the starting |
| and ending point for searching through the kernel's doubly linked |
| list of active mount points. That's why. |
| |
| config CONFIG_UMOUNT |
| bool "umount" |
| default n |
| help |
| When you want to remove a mounted filesystem from its current mount point, |
| for example when you are shutting down the system, the 'umount' utility is |
| the tool to use. If you enabled the 'mount' utility, you almost certainly |
| also want to enable 'umount'. |
| |
| config CONFIG_FEATURE_UMOUNT_ALL |
| bool "umount -a option" |
| default n |
| depends on CONFIG_UMOUNT |
| help |
| Support -a option to unmount all currently mounted filesystems. |
| |
| comment "Common options for mount/umount" |
| depends on CONFIG_MOUNT || CONFIG_UMOUNT |
| |
| config CONFIG_FEATURE_MOUNT_LOOP |
| bool "Support loopback mounts" |
| default n |
| depends on CONFIG_MOUNT || CONFIG_UMOUNT |
| help |
| Enabling this feature allows automatic mounting of files (containing |
| filesystem images) via the linux kernel's loopback devices. The mount |
| command will detect you are trying to mount a file instead of a block |
| device, and transparently associate the file with a loopback device. |
| The umount command will also free that loopback device. |
| |
| You can still use the 'losetup' utility (to manually associate files |
| with loop devices) if you need to do something advanced, such as |
| specify an offset or cryptographic options to the loopback device. |
| (If you don't want umount to free the loop device, use "umount -D".) |
| |
| config CONFIG_FEATURE_MTAB_SUPPORT |
| bool "Support for the old /etc/mtab file" |
| default n |
| depends on CONFIG_MOUNT || CONFIG_UMOUNT |
| help |
| Historically, Unix systems kept track of the currently mounted |
| partitions in the file "/etc/mtab". These days, the kernel exports |
| the list of currently mounted partitions in "/proc/mounts", rendering |
| the old mtab file obsolete. (In modern systems, /etc/mtab should be |
| a symlink to /proc/mounts.) |
| |
| The only reason to have mount maintain an /etc/mtab file itself is if |
| your stripped-down embedded system does not have a /proc directory. |
| If you must use this, keep in mind it's inherently brittle (for |
| example a mount under chroot won't update it), can't handle modern |
| features like separate per-process filesystem namespaces, requires |
| that your /etc directory be writeable, tends to get easily confused |
| by --bind or --move mounts, won't update if you rename a directory |
| that contains a mount point, and so on. (In brief: avoid.) |
| |
| About the only reason to use this is if you've removed /proc from |
| your kernel. |
| |
| endmenu |
| |