| /* vi: set sw=4 ts=4: */ |
| /* |
| * ash shell port for busybox |
| * |
| * Copyright (c) 1989, 1991, 1993, 1994 |
| * The Regents of the University of California. All rights reserved. |
| * |
| * Copyright (c) 1997-2005 Herbert Xu <herbert@gondor.apana.org.au> |
| * was re-ported from NetBSD and debianized. |
| * |
| * |
| * This code is derived from software contributed to Berkeley by |
| * Kenneth Almquist. |
| * |
| * Licensed under the GPL v2 or later, see the file LICENSE in this tarball. |
| * |
| * Original BSD copyright notice is retained at the end of this file. |
| */ |
| |
| /* |
| * rewrite arith.y to micro stack based cryptic algorithm by |
| * Copyright (c) 2001 Aaron Lehmann <aaronl@vitelus.com> |
| * |
| * Modified by Paul Mundt <lethal@linux-sh.org> (c) 2004 to support |
| * dynamic variables. |
| * |
| * Modified by Vladimir Oleynik <dzo@simtreas.ru> (c) 2001-2005 to be |
| * used in busybox and size optimizations, |
| * rewrote arith (see notes to this), added locale support, |
| * rewrote dynamic variables. |
| * |
| */ |
| |
| /* |
| * The follow should be set to reflect the type of system you have: |
| * JOBS -> 1 if you have Berkeley job control, 0 otherwise. |
| * define SYSV if you are running under System V. |
| * define DEBUG=1 to compile in debugging ('set -o debug' to turn on) |
| * define DEBUG=2 to compile in and turn on debugging. |
| * |
| * When debugging is on, debugging info will be written to ./trace and |
| * a quit signal will generate a core dump. |
| */ |
| #define DEBUG 0 |
| #define PROFILE 0 |
| |
| #define IFS_BROKEN |
| |
| #define JOBS ENABLE_ASH_JOB_CONTROL |
| |
| #if DEBUG |
| #ifndef _GNU_SOURCE |
| #define _GNU_SOURCE |
| #endif |
| #endif |
| |
| #include "busybox.h" /* for applet_names */ |
| #include <paths.h> |
| #include <setjmp.h> |
| #include <fnmatch.h> |
| #if JOBS || ENABLE_ASH_READ_NCHARS |
| #include <termios.h> |
| #endif |
| |
| #if defined(__uClinux__) |
| #error "Do not even bother, ash will not run on uClinux" |
| #endif |
| |
| |
| /* ============ Hash table sizes. Configurable. */ |
| |
| #define VTABSIZE 39 |
| #define ATABSIZE 39 |
| #define CMDTABLESIZE 31 /* should be prime */ |
| |
| |
| /* ============ Misc helpers */ |
| |
| #define xbarrier() do { __asm__ __volatile__ ("": : :"memory"); } while (0) |
| |
| /* C99 say: "char" declaration may be signed or unsigned default */ |
| #define signed_char2int(sc) ((int)((signed char)sc)) |
| |
| |
| /* ============ Shell options */ |
| |
| static const char *const optletters_optnames[] = { |
| "e" "errexit", |
| "f" "noglob", |
| "I" "ignoreeof", |
| "i" "interactive", |
| "m" "monitor", |
| "n" "noexec", |
| "s" "stdin", |
| "x" "xtrace", |
| "v" "verbose", |
| "C" "noclobber", |
| "a" "allexport", |
| "b" "notify", |
| "u" "nounset", |
| "\0" "vi" |
| #if DEBUG |
| ,"\0" "nolog" |
| ,"\0" "debug" |
| #endif |
| }; |
| |
| #define optletters(n) optletters_optnames[(n)][0] |
| #define optnames(n) (&optletters_optnames[(n)][1]) |
| |
| enum { NOPTS = ARRAY_SIZE(optletters_optnames) }; |
| |
| |
| /* ============ Misc data */ |
| |
| static const char homestr[] ALIGN1 = "HOME"; |
| static const char snlfmt[] ALIGN1 = "%s\n"; |
| static const char illnum[] ALIGN1 = "Illegal number: %s"; |
| |
| /* |
| * We enclose jmp_buf in a structure so that we can declare pointers to |
| * jump locations. The global variable handler contains the location to |
| * jump to when an exception occurs, and the global variable exception |
| * contains a code identifying the exception. To implement nested |
| * exception handlers, the user should save the value of handler on entry |
| * to an inner scope, set handler to point to a jmploc structure for the |
| * inner scope, and restore handler on exit from the scope. |
| */ |
| struct jmploc { |
| jmp_buf loc; |
| }; |
| |
| struct globals_misc { |
| /* pid of main shell */ |
| int rootpid; |
| /* shell level: 0 for the main shell, 1 for its children, and so on */ |
| int shlvl; |
| #define rootshell (!shlvl) |
| char *minusc; /* argument to -c option */ |
| |
| char *curdir; // = nullstr; /* current working directory */ |
| char *physdir; // = nullstr; /* physical working directory */ |
| |
| char *arg0; /* value of $0 */ |
| |
| struct jmploc *exception_handler; |
| |
| // disabled by vda: cannot understand how it was supposed to work - |
| // cannot fix bugs. That's why you have to explain your non-trivial designs! |
| // /* do we generate EXSIG events */ |
| // int exsig; /* counter */ |
| volatile int suppressint; /* counter */ |
| volatile /*sig_atomic_t*/ smallint intpending; /* 1 = got SIGINT */ |
| /* last pending signal */ |
| volatile /*sig_atomic_t*/ smallint pendingsig; |
| smallint exception; /* kind of exception (0..5) */ |
| /* exceptions */ |
| #define EXINT 0 /* SIGINT received */ |
| #define EXERROR 1 /* a generic error */ |
| #define EXSHELLPROC 2 /* execute a shell procedure */ |
| #define EXEXEC 3 /* command execution failed */ |
| #define EXEXIT 4 /* exit the shell */ |
| #define EXSIG 5 /* trapped signal in wait(1) */ |
| |
| smallint isloginsh; |
| char nullstr[1]; /* zero length string */ |
| |
| char optlist[NOPTS]; |
| #define eflag optlist[0] |
| #define fflag optlist[1] |
| #define Iflag optlist[2] |
| #define iflag optlist[3] |
| #define mflag optlist[4] |
| #define nflag optlist[5] |
| #define sflag optlist[6] |
| #define xflag optlist[7] |
| #define vflag optlist[8] |
| #define Cflag optlist[9] |
| #define aflag optlist[10] |
| #define bflag optlist[11] |
| #define uflag optlist[12] |
| #define viflag optlist[13] |
| #if DEBUG |
| #define nolog optlist[14] |
| #define debug optlist[15] |
| #endif |
| |
| /* trap handler commands */ |
| /* |
| * Sigmode records the current value of the signal handlers for the various |
| * modes. A value of zero means that the current handler is not known. |
| * S_HARD_IGN indicates that the signal was ignored on entry to the shell, |
| */ |
| char sigmode[NSIG - 1]; |
| #define S_DFL 1 /* default signal handling (SIG_DFL) */ |
| #define S_CATCH 2 /* signal is caught */ |
| #define S_IGN 3 /* signal is ignored (SIG_IGN) */ |
| #define S_HARD_IGN 4 /* signal is ignored permenantly */ |
| #define S_RESET 5 /* temporary - to reset a hard ignored sig */ |
| |
| /* indicates specified signal received */ |
| char gotsig[NSIG - 1]; |
| char *trap[NSIG]; |
| |
| /* Rarely referenced stuff */ |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| /* Random number generators */ |
| int32_t random_galois_LFSR; /* Galois LFSR (fast but weak). signed! */ |
| uint32_t random_LCG; /* LCG (fast but weak) */ |
| #endif |
| pid_t backgndpid; /* pid of last background process */ |
| smallint job_warning; /* user was warned about stopped jobs (can be 2, 1 or 0). */ |
| }; |
| extern struct globals_misc *const ash_ptr_to_globals_misc; |
| #define G_misc (*ash_ptr_to_globals_misc) |
| #define rootpid (G_misc.rootpid ) |
| #define shlvl (G_misc.shlvl ) |
| #define minusc (G_misc.minusc ) |
| #define curdir (G_misc.curdir ) |
| #define physdir (G_misc.physdir ) |
| #define arg0 (G_misc.arg0 ) |
| #define exception_handler (G_misc.exception_handler) |
| #define exception (G_misc.exception ) |
| #define suppressint (G_misc.suppressint ) |
| #define intpending (G_misc.intpending ) |
| //#define exsig (G_misc.exsig ) |
| #define pendingsig (G_misc.pendingsig ) |
| #define isloginsh (G_misc.isloginsh ) |
| #define nullstr (G_misc.nullstr ) |
| #define optlist (G_misc.optlist ) |
| #define sigmode (G_misc.sigmode ) |
| #define gotsig (G_misc.gotsig ) |
| #define trap (G_misc.trap ) |
| #define random_galois_LFSR (G_misc.random_galois_LFSR) |
| #define random_LCG (G_misc.random_LCG ) |
| #define backgndpid (G_misc.backgndpid ) |
| #define job_warning (G_misc.job_warning) |
| #define INIT_G_misc() do { \ |
| (*(struct globals_misc**)&ash_ptr_to_globals_misc) = xzalloc(sizeof(G_misc)); \ |
| barrier(); \ |
| curdir = nullstr; \ |
| physdir = nullstr; \ |
| } while (0) |
| |
| |
| /* ============ Interrupts / exceptions */ |
| |
| /* |
| * These macros allow the user to suspend the handling of interrupt signals |
| * over a period of time. This is similar to SIGHOLD or to sigblock, but |
| * much more efficient and portable. (But hacking the kernel is so much |
| * more fun than worrying about efficiency and portability. :-)) |
| */ |
| #define INT_OFF do { \ |
| suppressint++; \ |
| xbarrier(); \ |
| } while (0) |
| |
| /* |
| * Called to raise an exception. Since C doesn't include exceptions, we |
| * just do a longjmp to the exception handler. The type of exception is |
| * stored in the global variable "exception". |
| */ |
| static void raise_exception(int) ATTRIBUTE_NORETURN; |
| static void |
| raise_exception(int e) |
| { |
| #if DEBUG |
| if (exception_handler == NULL) |
| abort(); |
| #endif |
| INT_OFF; |
| exception = e; |
| longjmp(exception_handler->loc, 1); |
| } |
| |
| /* |
| * Called from trap.c when a SIGINT is received. (If the user specifies |
| * that SIGINT is to be trapped or ignored using the trap builtin, then |
| * this routine is not called.) Suppressint is nonzero when interrupts |
| * are held using the INT_OFF macro. (The test for iflag is just |
| * defensive programming.) |
| */ |
| static void raise_interrupt(void) ATTRIBUTE_NORETURN; |
| static void |
| raise_interrupt(void) |
| { |
| int i; |
| |
| intpending = 0; |
| /* Signal is not automatically unmasked after it is raised, |
| * do it ourself - unmask all signals */ |
| sigprocmask_allsigs(SIG_UNBLOCK); |
| /* pendingsig = 0; - now done in onsig() */ |
| |
| i = EXSIG; |
| if (gotsig[SIGINT - 1] && !trap[SIGINT]) { |
| if (!(rootshell && iflag)) { |
| /* Kill ourself with SIGINT */ |
| signal(SIGINT, SIG_DFL); |
| raise(SIGINT); |
| } |
| i = EXINT; |
| } |
| raise_exception(i); |
| /* NOTREACHED */ |
| } |
| |
| #if ENABLE_ASH_OPTIMIZE_FOR_SIZE |
| static void |
| int_on(void) |
| { |
| if (--suppressint == 0 && intpending) { |
| raise_interrupt(); |
| } |
| } |
| #define INT_ON int_on() |
| static void |
| force_int_on(void) |
| { |
| suppressint = 0; |
| if (intpending) |
| raise_interrupt(); |
| } |
| #define FORCE_INT_ON force_int_on() |
| #else |
| #define INT_ON do { \ |
| xbarrier(); \ |
| if (--suppressint == 0 && intpending) \ |
| raise_interrupt(); \ |
| } while (0) |
| #define FORCE_INT_ON do { \ |
| xbarrier(); \ |
| suppressint = 0; \ |
| if (intpending) \ |
| raise_interrupt(); \ |
| } while (0) |
| #endif /* ASH_OPTIMIZE_FOR_SIZE */ |
| |
| #define SAVE_INT(v) ((v) = suppressint) |
| |
| #define RESTORE_INT(v) do { \ |
| xbarrier(); \ |
| suppressint = (v); \ |
| if (suppressint == 0 && intpending) \ |
| raise_interrupt(); \ |
| } while (0) |
| |
| /* |
| * Ignore a signal. Only one usage site - in forkchild() |
| */ |
| static void |
| ignoresig(int signo) |
| { |
| if (sigmode[signo - 1] != S_IGN && sigmode[signo - 1] != S_HARD_IGN) { |
| signal(signo, SIG_IGN); |
| } |
| sigmode[signo - 1] = S_HARD_IGN; |
| } |
| |
| /* |
| * Signal handler. Only one usage site - in setsignal() |
| */ |
| static void |
| onsig(int signo) |
| { |
| gotsig[signo - 1] = 1; |
| pendingsig = signo; |
| |
| if (/* exsig || */ (signo == SIGINT && !trap[SIGINT])) { |
| if (!suppressint) { |
| pendingsig = 0; |
| raise_interrupt(); /* does not return */ |
| } |
| intpending = 1; |
| } |
| } |
| |
| |
| /* ============ Stdout/stderr output */ |
| |
| static void |
| outstr(const char *p, FILE *file) |
| { |
| INT_OFF; |
| fputs(p, file); |
| INT_ON; |
| } |
| |
| static void |
| flush_stdout_stderr(void) |
| { |
| INT_OFF; |
| fflush(stdout); |
| fflush(stderr); |
| INT_ON; |
| } |
| |
| static void |
| flush_stderr(void) |
| { |
| INT_OFF; |
| fflush(stderr); |
| INT_ON; |
| } |
| |
| static void |
| outcslow(int c, FILE *dest) |
| { |
| INT_OFF; |
| putc(c, dest); |
| fflush(dest); |
| INT_ON; |
| } |
| |
| static int out1fmt(const char *, ...) __attribute__((__format__(__printf__,1,2))); |
| static int |
| out1fmt(const char *fmt, ...) |
| { |
| va_list ap; |
| int r; |
| |
| INT_OFF; |
| va_start(ap, fmt); |
| r = vprintf(fmt, ap); |
| va_end(ap); |
| INT_ON; |
| return r; |
| } |
| |
| static int fmtstr(char *, size_t, const char *, ...) __attribute__((__format__(__printf__,3,4))); |
| static int |
| fmtstr(char *outbuf, size_t length, const char *fmt, ...) |
| { |
| va_list ap; |
| int ret; |
| |
| va_start(ap, fmt); |
| INT_OFF; |
| ret = vsnprintf(outbuf, length, fmt, ap); |
| va_end(ap); |
| INT_ON; |
| return ret; |
| } |
| |
| static void |
| out1str(const char *p) |
| { |
| outstr(p, stdout); |
| } |
| |
| static void |
| out2str(const char *p) |
| { |
| outstr(p, stderr); |
| flush_stderr(); |
| } |
| |
| |
| /* ============ Parser structures */ |
| |
| /* control characters in argument strings */ |
| #define CTLESC '\201' /* escape next character */ |
| #define CTLVAR '\202' /* variable defn */ |
| #define CTLENDVAR '\203' |
| #define CTLBACKQ '\204' |
| #define CTLQUOTE 01 /* ored with CTLBACKQ code if in quotes */ |
| /* CTLBACKQ | CTLQUOTE == '\205' */ |
| #define CTLARI '\206' /* arithmetic expression */ |
| #define CTLENDARI '\207' |
| #define CTLQUOTEMARK '\210' |
| |
| /* variable substitution byte (follows CTLVAR) */ |
| #define VSTYPE 0x0f /* type of variable substitution */ |
| #define VSNUL 0x10 /* colon--treat the empty string as unset */ |
| #define VSQUOTE 0x80 /* inside double quotes--suppress splitting */ |
| |
| /* values of VSTYPE field */ |
| #define VSNORMAL 0x1 /* normal variable: $var or ${var} */ |
| #define VSMINUS 0x2 /* ${var-text} */ |
| #define VSPLUS 0x3 /* ${var+text} */ |
| #define VSQUESTION 0x4 /* ${var?message} */ |
| #define VSASSIGN 0x5 /* ${var=text} */ |
| #define VSTRIMRIGHT 0x6 /* ${var%pattern} */ |
| #define VSTRIMRIGHTMAX 0x7 /* ${var%%pattern} */ |
| #define VSTRIMLEFT 0x8 /* ${var#pattern} */ |
| #define VSTRIMLEFTMAX 0x9 /* ${var##pattern} */ |
| #define VSLENGTH 0xa /* ${#var} */ |
| #if ENABLE_ASH_BASH_COMPAT |
| #define VSSUBSTR 0xc /* ${var:position:length} */ |
| #define VSREPLACE 0xd /* ${var/pattern/replacement} */ |
| #define VSREPLACEALL 0xe /* ${var//pattern/replacement} */ |
| #endif |
| |
| static const char dolatstr[] ALIGN1 = { |
| CTLVAR, VSNORMAL|VSQUOTE, '@', '=', '\0' |
| }; |
| |
| #define NCMD 0 |
| #define NPIPE 1 |
| #define NREDIR 2 |
| #define NBACKGND 3 |
| #define NSUBSHELL 4 |
| #define NAND 5 |
| #define NOR 6 |
| #define NSEMI 7 |
| #define NIF 8 |
| #define NWHILE 9 |
| #define NUNTIL 10 |
| #define NFOR 11 |
| #define NCASE 12 |
| #define NCLIST 13 |
| #define NDEFUN 14 |
| #define NARG 15 |
| #define NTO 16 |
| #define NCLOBBER 17 |
| #define NFROM 18 |
| #define NFROMTO 19 |
| #define NAPPEND 20 |
| #define NTOFD 21 |
| #define NFROMFD 22 |
| #define NHERE 23 |
| #define NXHERE 24 |
| #define NNOT 25 |
| |
| union node; |
| |
| struct ncmd { |
| int type; |
| union node *assign; |
| union node *args; |
| union node *redirect; |
| }; |
| |
| struct npipe { |
| int type; |
| int backgnd; |
| struct nodelist *cmdlist; |
| }; |
| |
| struct nredir { |
| int type; |
| union node *n; |
| union node *redirect; |
| }; |
| |
| struct nbinary { |
| int type; |
| union node *ch1; |
| union node *ch2; |
| }; |
| |
| struct nif { |
| int type; |
| union node *test; |
| union node *ifpart; |
| union node *elsepart; |
| }; |
| |
| struct nfor { |
| int type; |
| union node *args; |
| union node *body; |
| char *var; |
| }; |
| |
| struct ncase { |
| int type; |
| union node *expr; |
| union node *cases; |
| }; |
| |
| struct nclist { |
| int type; |
| union node *next; |
| union node *pattern; |
| union node *body; |
| }; |
| |
| struct narg { |
| int type; |
| union node *next; |
| char *text; |
| struct nodelist *backquote; |
| }; |
| |
| struct nfile { |
| int type; |
| union node *next; |
| int fd; |
| union node *fname; |
| char *expfname; |
| }; |
| |
| struct ndup { |
| int type; |
| union node *next; |
| int fd; |
| int dupfd; |
| union node *vname; |
| }; |
| |
| struct nhere { |
| int type; |
| union node *next; |
| int fd; |
| union node *doc; |
| }; |
| |
| struct nnot { |
| int type; |
| union node *com; |
| }; |
| |
| union node { |
| int type; |
| struct ncmd ncmd; |
| struct npipe npipe; |
| struct nredir nredir; |
| struct nbinary nbinary; |
| struct nif nif; |
| struct nfor nfor; |
| struct ncase ncase; |
| struct nclist nclist; |
| struct narg narg; |
| struct nfile nfile; |
| struct ndup ndup; |
| struct nhere nhere; |
| struct nnot nnot; |
| }; |
| |
| struct nodelist { |
| struct nodelist *next; |
| union node *n; |
| }; |
| |
| struct funcnode { |
| int count; |
| union node n; |
| }; |
| |
| /* |
| * Free a parse tree. |
| */ |
| static void |
| freefunc(struct funcnode *f) |
| { |
| if (f && --f->count < 0) |
| free(f); |
| } |
| |
| |
| /* ============ Debugging output */ |
| |
| #if DEBUG |
| |
| static FILE *tracefile; |
| |
| static void |
| trace_printf(const char *fmt, ...) |
| { |
| va_list va; |
| |
| if (debug != 1) |
| return; |
| va_start(va, fmt); |
| vfprintf(tracefile, fmt, va); |
| va_end(va); |
| } |
| |
| static void |
| trace_vprintf(const char *fmt, va_list va) |
| { |
| if (debug != 1) |
| return; |
| vfprintf(tracefile, fmt, va); |
| } |
| |
| static void |
| trace_puts(const char *s) |
| { |
| if (debug != 1) |
| return; |
| fputs(s, tracefile); |
| } |
| |
| static void |
| trace_puts_quoted(char *s) |
| { |
| char *p; |
| char c; |
| |
| if (debug != 1) |
| return; |
| putc('"', tracefile); |
| for (p = s; *p; p++) { |
| switch (*p) { |
| case '\n': c = 'n'; goto backslash; |
| case '\t': c = 't'; goto backslash; |
| case '\r': c = 'r'; goto backslash; |
| case '"': c = '"'; goto backslash; |
| case '\\': c = '\\'; goto backslash; |
| case CTLESC: c = 'e'; goto backslash; |
| case CTLVAR: c = 'v'; goto backslash; |
| case CTLVAR+CTLQUOTE: c = 'V'; goto backslash; |
| case CTLBACKQ: c = 'q'; goto backslash; |
| case CTLBACKQ+CTLQUOTE: c = 'Q'; goto backslash; |
| backslash: |
| putc('\\', tracefile); |
| putc(c, tracefile); |
| break; |
| default: |
| if (*p >= ' ' && *p <= '~') |
| putc(*p, tracefile); |
| else { |
| putc('\\', tracefile); |
| putc(*p >> 6 & 03, tracefile); |
| putc(*p >> 3 & 07, tracefile); |
| putc(*p & 07, tracefile); |
| } |
| break; |
| } |
| } |
| putc('"', tracefile); |
| } |
| |
| static void |
| trace_puts_args(char **ap) |
| { |
| if (debug != 1) |
| return; |
| if (!*ap) |
| return; |
| while (1) { |
| trace_puts_quoted(*ap); |
| if (!*++ap) { |
| putc('\n', tracefile); |
| break; |
| } |
| putc(' ', tracefile); |
| } |
| } |
| |
| static void |
| opentrace(void) |
| { |
| char s[100]; |
| #ifdef O_APPEND |
| int flags; |
| #endif |
| |
| if (debug != 1) { |
| if (tracefile) |
| fflush(tracefile); |
| /* leave open because libedit might be using it */ |
| return; |
| } |
| strcpy(s, "./trace"); |
| if (tracefile) { |
| if (!freopen(s, "a", tracefile)) { |
| fprintf(stderr, "Can't re-open %s\n", s); |
| debug = 0; |
| return; |
| } |
| } else { |
| tracefile = fopen(s, "a"); |
| if (tracefile == NULL) { |
| fprintf(stderr, "Can't open %s\n", s); |
| debug = 0; |
| return; |
| } |
| } |
| #ifdef O_APPEND |
| flags = fcntl(fileno(tracefile), F_GETFL); |
| if (flags >= 0) |
| fcntl(fileno(tracefile), F_SETFL, flags | O_APPEND); |
| #endif |
| setlinebuf(tracefile); |
| fputs("\nTracing started.\n", tracefile); |
| } |
| |
| static void |
| indent(int amount, char *pfx, FILE *fp) |
| { |
| int i; |
| |
| for (i = 0; i < amount; i++) { |
| if (pfx && i == amount - 1) |
| fputs(pfx, fp); |
| putc('\t', fp); |
| } |
| } |
| |
| /* little circular references here... */ |
| static void shtree(union node *n, int ind, char *pfx, FILE *fp); |
| |
| static void |
| sharg(union node *arg, FILE *fp) |
| { |
| char *p; |
| struct nodelist *bqlist; |
| int subtype; |
| |
| if (arg->type != NARG) { |
| out1fmt("<node type %d>\n", arg->type); |
| abort(); |
| } |
| bqlist = arg->narg.backquote; |
| for (p = arg->narg.text; *p; p++) { |
| switch (*p) { |
| case CTLESC: |
| putc(*++p, fp); |
| break; |
| case CTLVAR: |
| putc('$', fp); |
| putc('{', fp); |
| subtype = *++p; |
| if (subtype == VSLENGTH) |
| putc('#', fp); |
| |
| while (*p != '=') |
| putc(*p++, fp); |
| |
| if (subtype & VSNUL) |
| putc(':', fp); |
| |
| switch (subtype & VSTYPE) { |
| case VSNORMAL: |
| putc('}', fp); |
| break; |
| case VSMINUS: |
| putc('-', fp); |
| break; |
| case VSPLUS: |
| putc('+', fp); |
| break; |
| case VSQUESTION: |
| putc('?', fp); |
| break; |
| case VSASSIGN: |
| putc('=', fp); |
| break; |
| case VSTRIMLEFT: |
| putc('#', fp); |
| break; |
| case VSTRIMLEFTMAX: |
| putc('#', fp); |
| putc('#', fp); |
| break; |
| case VSTRIMRIGHT: |
| putc('%', fp); |
| break; |
| case VSTRIMRIGHTMAX: |
| putc('%', fp); |
| putc('%', fp); |
| break; |
| case VSLENGTH: |
| break; |
| default: |
| out1fmt("<subtype %d>", subtype); |
| } |
| break; |
| case CTLENDVAR: |
| putc('}', fp); |
| break; |
| case CTLBACKQ: |
| case CTLBACKQ|CTLQUOTE: |
| putc('$', fp); |
| putc('(', fp); |
| shtree(bqlist->n, -1, NULL, fp); |
| putc(')', fp); |
| break; |
| default: |
| putc(*p, fp); |
| break; |
| } |
| } |
| } |
| |
| static void |
| shcmd(union node *cmd, FILE *fp) |
| { |
| union node *np; |
| int first; |
| const char *s; |
| int dftfd; |
| |
| first = 1; |
| for (np = cmd->ncmd.args; np; np = np->narg.next) { |
| if (!first) |
| putc(' ', fp); |
| sharg(np, fp); |
| first = 0; |
| } |
| for (np = cmd->ncmd.redirect; np; np = np->nfile.next) { |
| if (!first) |
| putc(' ', fp); |
| dftfd = 0; |
| switch (np->nfile.type) { |
| case NTO: s = ">>"+1; dftfd = 1; break; |
| case NCLOBBER: s = ">|"; dftfd = 1; break; |
| case NAPPEND: s = ">>"; dftfd = 1; break; |
| case NTOFD: s = ">&"; dftfd = 1; break; |
| case NFROM: s = "<"; break; |
| case NFROMFD: s = "<&"; break; |
| case NFROMTO: s = "<>"; break; |
| default: s = "*error*"; break; |
| } |
| if (np->nfile.fd != dftfd) |
| fprintf(fp, "%d", np->nfile.fd); |
| fputs(s, fp); |
| if (np->nfile.type == NTOFD || np->nfile.type == NFROMFD) { |
| fprintf(fp, "%d", np->ndup.dupfd); |
| } else { |
| sharg(np->nfile.fname, fp); |
| } |
| first = 0; |
| } |
| } |
| |
| static void |
| shtree(union node *n, int ind, char *pfx, FILE *fp) |
| { |
| struct nodelist *lp; |
| const char *s; |
| |
| if (n == NULL) |
| return; |
| |
| indent(ind, pfx, fp); |
| switch (n->type) { |
| case NSEMI: |
| s = "; "; |
| goto binop; |
| case NAND: |
| s = " && "; |
| goto binop; |
| case NOR: |
| s = " || "; |
| binop: |
| shtree(n->nbinary.ch1, ind, NULL, fp); |
| /* if (ind < 0) */ |
| fputs(s, fp); |
| shtree(n->nbinary.ch2, ind, NULL, fp); |
| break; |
| case NCMD: |
| shcmd(n, fp); |
| if (ind >= 0) |
| putc('\n', fp); |
| break; |
| case NPIPE: |
| for (lp = n->npipe.cmdlist; lp; lp = lp->next) { |
| shcmd(lp->n, fp); |
| if (lp->next) |
| fputs(" | ", fp); |
| } |
| if (n->npipe.backgnd) |
| fputs(" &", fp); |
| if (ind >= 0) |
| putc('\n', fp); |
| break; |
| default: |
| fprintf(fp, "<node type %d>", n->type); |
| if (ind >= 0) |
| putc('\n', fp); |
| break; |
| } |
| } |
| |
| static void |
| showtree(union node *n) |
| { |
| trace_puts("showtree called\n"); |
| shtree(n, 1, NULL, stdout); |
| } |
| |
| #define TRACE(param) trace_printf param |
| #define TRACEV(param) trace_vprintf param |
| |
| #else |
| |
| #define TRACE(param) |
| #define TRACEV(param) |
| |
| #endif /* DEBUG */ |
| |
| |
| /* ============ Parser data */ |
| |
| /* |
| * ash_vmsg() needs parsefile->fd, hence parsefile definition is moved up. |
| */ |
| struct strlist { |
| struct strlist *next; |
| char *text; |
| }; |
| |
| struct alias; |
| |
| struct strpush { |
| struct strpush *prev; /* preceding string on stack */ |
| char *prevstring; |
| int prevnleft; |
| #if ENABLE_ASH_ALIAS |
| struct alias *ap; /* if push was associated with an alias */ |
| #endif |
| char *string; /* remember the string since it may change */ |
| }; |
| |
| struct parsefile { |
| struct parsefile *prev; /* preceding file on stack */ |
| int linno; /* current line */ |
| int fd; /* file descriptor (or -1 if string) */ |
| int nleft; /* number of chars left in this line */ |
| int lleft; /* number of chars left in this buffer */ |
| char *nextc; /* next char in buffer */ |
| char *buf; /* input buffer */ |
| struct strpush *strpush; /* for pushing strings at this level */ |
| struct strpush basestrpush; /* so pushing one is fast */ |
| }; |
| |
| static struct parsefile basepf; /* top level input file */ |
| static struct parsefile *g_parsefile = &basepf; /* current input file */ |
| static int startlinno; /* line # where last token started */ |
| static char *commandname; /* currently executing command */ |
| static struct strlist *cmdenviron; /* environment for builtin command */ |
| static uint8_t exitstatus; /* exit status of last command */ |
| |
| |
| /* ============ Message printing */ |
| |
| static void |
| ash_vmsg(const char *msg, va_list ap) |
| { |
| fprintf(stderr, "%s: ", arg0); |
| if (commandname) { |
| if (strcmp(arg0, commandname)) |
| fprintf(stderr, "%s: ", commandname); |
| if (!iflag || g_parsefile->fd) |
| fprintf(stderr, "line %d: ", startlinno); |
| } |
| vfprintf(stderr, msg, ap); |
| outcslow('\n', stderr); |
| } |
| |
| /* |
| * Exverror is called to raise the error exception. If the second argument |
| * is not NULL then error prints an error message using printf style |
| * formatting. It then raises the error exception. |
| */ |
| static void ash_vmsg_and_raise(int, const char *, va_list) ATTRIBUTE_NORETURN; |
| static void |
| ash_vmsg_and_raise(int cond, const char *msg, va_list ap) |
| { |
| #if DEBUG |
| if (msg) { |
| TRACE(("ash_vmsg_and_raise(%d, \"", cond)); |
| TRACEV((msg, ap)); |
| TRACE(("\") pid=%d\n", getpid())); |
| } else |
| TRACE(("ash_vmsg_and_raise(%d, NULL) pid=%d\n", cond, getpid())); |
| if (msg) |
| #endif |
| ash_vmsg(msg, ap); |
| |
| flush_stdout_stderr(); |
| raise_exception(cond); |
| /* NOTREACHED */ |
| } |
| |
| static void ash_msg_and_raise_error(const char *, ...) ATTRIBUTE_NORETURN; |
| static void |
| ash_msg_and_raise_error(const char *msg, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, msg); |
| ash_vmsg_and_raise(EXERROR, msg, ap); |
| /* NOTREACHED */ |
| va_end(ap); |
| } |
| |
| static void ash_msg_and_raise(int, const char *, ...) ATTRIBUTE_NORETURN; |
| static void |
| ash_msg_and_raise(int cond, const char *msg, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, msg); |
| ash_vmsg_and_raise(cond, msg, ap); |
| /* NOTREACHED */ |
| va_end(ap); |
| } |
| |
| /* |
| * error/warning routines for external builtins |
| */ |
| static void |
| ash_msg(const char *fmt, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, fmt); |
| ash_vmsg(fmt, ap); |
| va_end(ap); |
| } |
| |
| /* |
| * Return a string describing an error. The returned string may be a |
| * pointer to a static buffer that will be overwritten on the next call. |
| * Action describes the operation that got the error. |
| */ |
| static const char * |
| errmsg(int e, const char *em) |
| { |
| if (e == ENOENT || e == ENOTDIR) { |
| return em; |
| } |
| return strerror(e); |
| } |
| |
| |
| /* ============ Memory allocation */ |
| |
| /* |
| * It appears that grabstackstr() will barf with such alignments |
| * because stalloc() will return a string allocated in a new stackblock. |
| */ |
| #define SHELL_ALIGN(nbytes) (((nbytes) + SHELL_SIZE) & ~SHELL_SIZE) |
| enum { |
| /* Most machines require the value returned from malloc to be aligned |
| * in some way. The following macro will get this right |
| * on many machines. */ |
| SHELL_SIZE = sizeof(union {int i; char *cp; double d; }) - 1, |
| /* Minimum size of a block */ |
| MINSIZE = SHELL_ALIGN(504), |
| }; |
| |
| struct stack_block { |
| struct stack_block *prev; |
| char space[MINSIZE]; |
| }; |
| |
| struct stackmark { |
| struct stack_block *stackp; |
| char *stacknxt; |
| size_t stacknleft; |
| struct stackmark *marknext; |
| }; |
| |
| |
| struct globals_memstack { |
| struct stack_block *g_stackp; // = &stackbase; |
| struct stackmark *markp; |
| char *g_stacknxt; // = stackbase.space; |
| char *sstrend; // = stackbase.space + MINSIZE; |
| size_t g_stacknleft; // = MINSIZE; |
| int herefd; // = -1; |
| struct stack_block stackbase; |
| }; |
| extern struct globals_memstack *const ash_ptr_to_globals_memstack; |
| #define G_memstack (*ash_ptr_to_globals_memstack) |
| #define g_stackp (G_memstack.g_stackp ) |
| #define markp (G_memstack.markp ) |
| #define g_stacknxt (G_memstack.g_stacknxt ) |
| #define sstrend (G_memstack.sstrend ) |
| #define g_stacknleft (G_memstack.g_stacknleft) |
| #define herefd (G_memstack.herefd ) |
| #define stackbase (G_memstack.stackbase ) |
| #define INIT_G_memstack() do { \ |
| (*(struct globals_memstack**)&ash_ptr_to_globals_memstack) = xzalloc(sizeof(G_memstack)); \ |
| barrier(); \ |
| g_stackp = &stackbase; \ |
| g_stacknxt = stackbase.space; \ |
| g_stacknleft = MINSIZE; \ |
| sstrend = stackbase.space + MINSIZE; \ |
| herefd = -1; \ |
| } while (0) |
| |
| #define stackblock() ((void *)g_stacknxt) |
| #define stackblocksize() g_stacknleft |
| |
| |
| static void * |
| ckrealloc(void * p, size_t nbytes) |
| { |
| p = realloc(p, nbytes); |
| if (!p) |
| ash_msg_and_raise_error(bb_msg_memory_exhausted); |
| return p; |
| } |
| |
| static void * |
| ckmalloc(size_t nbytes) |
| { |
| return ckrealloc(NULL, nbytes); |
| } |
| |
| static void * |
| ckzalloc(size_t nbytes) |
| { |
| return memset(ckmalloc(nbytes), 0, nbytes); |
| } |
| |
| /* |
| * Make a copy of a string in safe storage. |
| */ |
| static char * |
| ckstrdup(const char *s) |
| { |
| char *p = strdup(s); |
| if (!p) |
| ash_msg_and_raise_error(bb_msg_memory_exhausted); |
| return p; |
| } |
| |
| /* |
| * Parse trees for commands are allocated in lifo order, so we use a stack |
| * to make this more efficient, and also to avoid all sorts of exception |
| * handling code to handle interrupts in the middle of a parse. |
| * |
| * The size 504 was chosen because the Ultrix malloc handles that size |
| * well. |
| */ |
| static void * |
| stalloc(size_t nbytes) |
| { |
| char *p; |
| size_t aligned; |
| |
| aligned = SHELL_ALIGN(nbytes); |
| if (aligned > g_stacknleft) { |
| size_t len; |
| size_t blocksize; |
| struct stack_block *sp; |
| |
| blocksize = aligned; |
| if (blocksize < MINSIZE) |
| blocksize = MINSIZE; |
| len = sizeof(struct stack_block) - MINSIZE + blocksize; |
| if (len < blocksize) |
| ash_msg_and_raise_error(bb_msg_memory_exhausted); |
| INT_OFF; |
| sp = ckmalloc(len); |
| sp->prev = g_stackp; |
| g_stacknxt = sp->space; |
| g_stacknleft = blocksize; |
| sstrend = g_stacknxt + blocksize; |
| g_stackp = sp; |
| INT_ON; |
| } |
| p = g_stacknxt; |
| g_stacknxt += aligned; |
| g_stacknleft -= aligned; |
| return p; |
| } |
| |
| static void * |
| stzalloc(size_t nbytes) |
| { |
| return memset(stalloc(nbytes), 0, nbytes); |
| } |
| |
| static void |
| stunalloc(void *p) |
| { |
| #if DEBUG |
| if (!p || (g_stacknxt < (char *)p) || ((char *)p < g_stackp->space)) { |
| write(STDERR_FILENO, "stunalloc\n", 10); |
| abort(); |
| } |
| #endif |
| g_stacknleft += g_stacknxt - (char *)p; |
| g_stacknxt = p; |
| } |
| |
| /* |
| * Like strdup but works with the ash stack. |
| */ |
| static char * |
| ststrdup(const char *p) |
| { |
| size_t len = strlen(p) + 1; |
| return memcpy(stalloc(len), p, len); |
| } |
| |
| static void |
| setstackmark(struct stackmark *mark) |
| { |
| mark->stackp = g_stackp; |
| mark->stacknxt = g_stacknxt; |
| mark->stacknleft = g_stacknleft; |
| mark->marknext = markp; |
| markp = mark; |
| } |
| |
| static void |
| popstackmark(struct stackmark *mark) |
| { |
| struct stack_block *sp; |
| |
| if (!mark->stackp) |
| return; |
| |
| INT_OFF; |
| markp = mark->marknext; |
| while (g_stackp != mark->stackp) { |
| sp = g_stackp; |
| g_stackp = sp->prev; |
| free(sp); |
| } |
| g_stacknxt = mark->stacknxt; |
| g_stacknleft = mark->stacknleft; |
| sstrend = mark->stacknxt + mark->stacknleft; |
| INT_ON; |
| } |
| |
| /* |
| * When the parser reads in a string, it wants to stick the string on the |
| * stack and only adjust the stack pointer when it knows how big the |
| * string is. Stackblock (defined in stack.h) returns a pointer to a block |
| * of space on top of the stack and stackblocklen returns the length of |
| * this block. Growstackblock will grow this space by at least one byte, |
| * possibly moving it (like realloc). Grabstackblock actually allocates the |
| * part of the block that has been used. |
| */ |
| static void |
| growstackblock(void) |
| { |
| size_t newlen; |
| |
| newlen = g_stacknleft * 2; |
| if (newlen < g_stacknleft) |
| ash_msg_and_raise_error(bb_msg_memory_exhausted); |
| if (newlen < 128) |
| newlen += 128; |
| |
| if (g_stacknxt == g_stackp->space && g_stackp != &stackbase) { |
| struct stack_block *oldstackp; |
| struct stackmark *xmark; |
| struct stack_block *sp; |
| struct stack_block *prevstackp; |
| size_t grosslen; |
| |
| INT_OFF; |
| oldstackp = g_stackp; |
| sp = g_stackp; |
| prevstackp = sp->prev; |
| grosslen = newlen + sizeof(struct stack_block) - MINSIZE; |
| sp = ckrealloc(sp, grosslen); |
| sp->prev = prevstackp; |
| g_stackp = sp; |
| g_stacknxt = sp->space; |
| g_stacknleft = newlen; |
| sstrend = sp->space + newlen; |
| |
| /* |
| * Stack marks pointing to the start of the old block |
| * must be relocated to point to the new block |
| */ |
| xmark = markp; |
| while (xmark != NULL && xmark->stackp == oldstackp) { |
| xmark->stackp = g_stackp; |
| xmark->stacknxt = g_stacknxt; |
| xmark->stacknleft = g_stacknleft; |
| xmark = xmark->marknext; |
| } |
| INT_ON; |
| } else { |
| char *oldspace = g_stacknxt; |
| size_t oldlen = g_stacknleft; |
| char *p = stalloc(newlen); |
| |
| /* free the space we just allocated */ |
| g_stacknxt = memcpy(p, oldspace, oldlen); |
| g_stacknleft += newlen; |
| } |
| } |
| |
| static void |
| grabstackblock(size_t len) |
| { |
| len = SHELL_ALIGN(len); |
| g_stacknxt += len; |
| g_stacknleft -= len; |
| } |
| |
| /* |
| * The following routines are somewhat easier to use than the above. |
| * The user declares a variable of type STACKSTR, which may be declared |
| * to be a register. The macro STARTSTACKSTR initializes things. Then |
| * the user uses the macro STPUTC to add characters to the string. In |
| * effect, STPUTC(c, p) is the same as *p++ = c except that the stack is |
| * grown as necessary. When the user is done, she can just leave the |
| * string there and refer to it using stackblock(). Or she can allocate |
| * the space for it using grabstackstr(). If it is necessary to allow |
| * someone else to use the stack temporarily and then continue to grow |
| * the string, the user should use grabstack to allocate the space, and |
| * then call ungrabstr(p) to return to the previous mode of operation. |
| * |
| * USTPUTC is like STPUTC except that it doesn't check for overflow. |
| * CHECKSTACKSPACE can be called before USTPUTC to ensure that there |
| * is space for at least one character. |
| */ |
| static void * |
| growstackstr(void) |
| { |
| size_t len = stackblocksize(); |
| if (herefd >= 0 && len >= 1024) { |
| full_write(herefd, stackblock(), len); |
| return stackblock(); |
| } |
| growstackblock(); |
| return (char *)stackblock() + len; |
| } |
| |
| /* |
| * Called from CHECKSTRSPACE. |
| */ |
| static char * |
| makestrspace(size_t newlen, char *p) |
| { |
| size_t len = p - g_stacknxt; |
| size_t size = stackblocksize(); |
| |
| for (;;) { |
| size_t nleft; |
| |
| size = stackblocksize(); |
| nleft = size - len; |
| if (nleft >= newlen) |
| break; |
| growstackblock(); |
| } |
| return (char *)stackblock() + len; |
| } |
| |
| static char * |
| stack_nputstr(const char *s, size_t n, char *p) |
| { |
| p = makestrspace(n, p); |
| p = (char *)memcpy(p, s, n) + n; |
| return p; |
| } |
| |
| static char * |
| stack_putstr(const char *s, char *p) |
| { |
| return stack_nputstr(s, strlen(s), p); |
| } |
| |
| static char * |
| _STPUTC(int c, char *p) |
| { |
| if (p == sstrend) |
| p = growstackstr(); |
| *p++ = c; |
| return p; |
| } |
| |
| #define STARTSTACKSTR(p) ((p) = stackblock()) |
| #define STPUTC(c, p) ((p) = _STPUTC((c), (p))) |
| #define CHECKSTRSPACE(n, p) do { \ |
| char *q = (p); \ |
| size_t l = (n); \ |
| size_t m = sstrend - q; \ |
| if (l > m) \ |
| (p) = makestrspace(l, q); \ |
| } while (0) |
| #define USTPUTC(c, p) (*(p)++ = (c)) |
| #define STACKSTRNUL(p) do { \ |
| if ((p) == sstrend) \ |
| (p) = growstackstr(); \ |
| *(p) = '\0'; \ |
| } while (0) |
| #define STUNPUTC(p) (--(p)) |
| #define STTOPC(p) ((p)[-1]) |
| #define STADJUST(amount, p) ((p) += (amount)) |
| |
| #define grabstackstr(p) stalloc((char *)(p) - (char *)stackblock()) |
| #define ungrabstackstr(s, p) stunalloc(s) |
| #define stackstrend() ((void *)sstrend) |
| |
| |
| /* ============ String helpers */ |
| |
| /* |
| * prefix -- see if pfx is a prefix of string. |
| */ |
| static char * |
| prefix(const char *string, const char *pfx) |
| { |
| while (*pfx) { |
| if (*pfx++ != *string++) |
| return NULL; |
| } |
| return (char *) string; |
| } |
| |
| /* |
| * Check for a valid number. This should be elsewhere. |
| */ |
| static int |
| is_number(const char *p) |
| { |
| do { |
| if (!isdigit(*p)) |
| return 0; |
| } while (*++p != '\0'); |
| return 1; |
| } |
| |
| /* |
| * Convert a string of digits to an integer, printing an error message on |
| * failure. |
| */ |
| static int |
| number(const char *s) |
| { |
| if (!is_number(s)) |
| ash_msg_and_raise_error(illnum, s); |
| return atoi(s); |
| } |
| |
| /* |
| * Produce a possibly single quoted string suitable as input to the shell. |
| * The return string is allocated on the stack. |
| */ |
| static char * |
| single_quote(const char *s) |
| { |
| char *p; |
| |
| STARTSTACKSTR(p); |
| |
| do { |
| char *q; |
| size_t len; |
| |
| len = strchrnul(s, '\'') - s; |
| |
| q = p = makestrspace(len + 3, p); |
| |
| *q++ = '\''; |
| q = (char *)memcpy(q, s, len) + len; |
| *q++ = '\''; |
| s += len; |
| |
| STADJUST(q - p, p); |
| |
| len = strspn(s, "'"); |
| if (!len) |
| break; |
| |
| q = p = makestrspace(len + 3, p); |
| |
| *q++ = '"'; |
| q = (char *)memcpy(q, s, len) + len; |
| *q++ = '"'; |
| s += len; |
| |
| STADJUST(q - p, p); |
| } while (*s); |
| |
| USTPUTC(0, p); |
| |
| return stackblock(); |
| } |
| |
| |
| /* ============ nextopt */ |
| |
| static char **argptr; /* argument list for builtin commands */ |
| static char *optionarg; /* set by nextopt (like getopt) */ |
| static char *optptr; /* used by nextopt */ |
| |
| /* |
| * XXX - should get rid of. have all builtins use getopt(3). the |
| * library getopt must have the BSD extension static variable "optreset" |
| * otherwise it can't be used within the shell safely. |
| * |
| * Standard option processing (a la getopt) for builtin routines. The |
| * only argument that is passed to nextopt is the option string; the |
| * other arguments are unnecessary. It return the character, or '\0' on |
| * end of input. |
| */ |
| static int |
| nextopt(const char *optstring) |
| { |
| char *p; |
| const char *q; |
| char c; |
| |
| p = optptr; |
| if (p == NULL || *p == '\0') { |
| p = *argptr; |
| if (p == NULL || *p != '-' || *++p == '\0') |
| return '\0'; |
| argptr++; |
| if (LONE_DASH(p)) /* check for "--" */ |
| return '\0'; |
| } |
| c = *p++; |
| for (q = optstring; *q != c;) { |
| if (*q == '\0') |
| ash_msg_and_raise_error("illegal option -%c", c); |
| if (*++q == ':') |
| q++; |
| } |
| if (*++q == ':') { |
| if (*p == '\0' && (p = *argptr++) == NULL) |
| ash_msg_and_raise_error("no arg for -%c option", c); |
| optionarg = p; |
| p = NULL; |
| } |
| optptr = p; |
| return c; |
| } |
| |
| |
| /* ============ Shell variables */ |
| |
| /* |
| * The parsefile structure pointed to by the global variable parsefile |
| * contains information about the current file being read. |
| */ |
| struct redirtab { |
| struct redirtab *next; |
| int renamed[10]; |
| int nullredirs; |
| }; |
| |
| struct shparam { |
| int nparam; /* # of positional parameters (without $0) */ |
| #if ENABLE_ASH_GETOPTS |
| int optind; /* next parameter to be processed by getopts */ |
| int optoff; /* used by getopts */ |
| #endif |
| unsigned char malloced; /* if parameter list dynamically allocated */ |
| char **p; /* parameter list */ |
| }; |
| |
| /* |
| * Free the list of positional parameters. |
| */ |
| static void |
| freeparam(volatile struct shparam *param) |
| { |
| char **ap; |
| |
| if (param->malloced) { |
| for (ap = param->p; *ap; ap++) |
| free(*ap); |
| free(param->p); |
| } |
| } |
| |
| #if ENABLE_ASH_GETOPTS |
| static void getoptsreset(const char *value); |
| #endif |
| |
| struct var { |
| struct var *next; /* next entry in hash list */ |
| int flags; /* flags are defined above */ |
| const char *text; /* name=value */ |
| void (*func)(const char *); /* function to be called when */ |
| /* the variable gets set/unset */ |
| }; |
| |
| struct localvar { |
| struct localvar *next; /* next local variable in list */ |
| struct var *vp; /* the variable that was made local */ |
| int flags; /* saved flags */ |
| const char *text; /* saved text */ |
| }; |
| |
| /* flags */ |
| #define VEXPORT 0x01 /* variable is exported */ |
| #define VREADONLY 0x02 /* variable cannot be modified */ |
| #define VSTRFIXED 0x04 /* variable struct is statically allocated */ |
| #define VTEXTFIXED 0x08 /* text is statically allocated */ |
| #define VSTACK 0x10 /* text is allocated on the stack */ |
| #define VUNSET 0x20 /* the variable is not set */ |
| #define VNOFUNC 0x40 /* don't call the callback function */ |
| #define VNOSET 0x80 /* do not set variable - just readonly test */ |
| #define VNOSAVE 0x100 /* when text is on the heap before setvareq */ |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| # define VDYNAMIC 0x200 /* dynamic variable */ |
| #else |
| # define VDYNAMIC 0 |
| #endif |
| |
| #ifdef IFS_BROKEN |
| static const char defifsvar[] ALIGN1 = "IFS= \t\n"; |
| #define defifs (defifsvar + 4) |
| #else |
| static const char defifs[] ALIGN1 = " \t\n"; |
| #endif |
| |
| |
| /* Need to be before varinit_data[] */ |
| #if ENABLE_LOCALE_SUPPORT |
| static void |
| change_lc_all(const char *value) |
| { |
| if (value && *value != '\0') |
| setlocale(LC_ALL, value); |
| } |
| static void |
| change_lc_ctype(const char *value) |
| { |
| if (value && *value != '\0') |
| setlocale(LC_CTYPE, value); |
| } |
| #endif |
| #if ENABLE_ASH_MAIL |
| static void chkmail(void); |
| static void changemail(const char *); |
| #endif |
| static void changepath(const char *); |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| static void change_random(const char *); |
| #endif |
| |
| static const struct { |
| int flags; |
| const char *text; |
| void (*func)(const char *); |
| } varinit_data[] = { |
| #ifdef IFS_BROKEN |
| { VSTRFIXED|VTEXTFIXED , defifsvar , NULL }, |
| #else |
| { VSTRFIXED|VTEXTFIXED|VUNSET, "IFS\0" , NULL }, |
| #endif |
| #if ENABLE_ASH_MAIL |
| { VSTRFIXED|VTEXTFIXED|VUNSET, "MAIL\0" , changemail }, |
| { VSTRFIXED|VTEXTFIXED|VUNSET, "MAILPATH\0", changemail }, |
| #endif |
| { VSTRFIXED|VTEXTFIXED , bb_PATH_root_path, changepath }, |
| { VSTRFIXED|VTEXTFIXED , "PS1=$ " , NULL }, |
| { VSTRFIXED|VTEXTFIXED , "PS2=> " , NULL }, |
| { VSTRFIXED|VTEXTFIXED , "PS4=+ " , NULL }, |
| #if ENABLE_ASH_GETOPTS |
| { VSTRFIXED|VTEXTFIXED , "OPTIND=1" , getoptsreset }, |
| #endif |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| { VSTRFIXED|VTEXTFIXED|VUNSET|VDYNAMIC, "RANDOM\0", change_random }, |
| #endif |
| #if ENABLE_LOCALE_SUPPORT |
| { VSTRFIXED|VTEXTFIXED|VUNSET, "LC_ALL\0" , change_lc_all }, |
| { VSTRFIXED|VTEXTFIXED|VUNSET, "LC_CTYPE\0", change_lc_ctype }, |
| #endif |
| #if ENABLE_FEATURE_EDITING_SAVEHISTORY |
| { VSTRFIXED|VTEXTFIXED|VUNSET, "HISTFILE\0", NULL }, |
| #endif |
| }; |
| |
| |
| struct globals_var { |
| struct shparam shellparam; /* $@ current positional parameters */ |
| struct redirtab *redirlist; |
| int g_nullredirs; |
| int preverrout_fd; /* save fd2 before print debug if xflag is set. */ |
| struct var *vartab[VTABSIZE]; |
| struct var varinit[ARRAY_SIZE(varinit_data)]; |
| }; |
| extern struct globals_var *const ash_ptr_to_globals_var; |
| #define G_var (*ash_ptr_to_globals_var) |
| #define shellparam (G_var.shellparam ) |
| #define redirlist (G_var.redirlist ) |
| #define g_nullredirs (G_var.g_nullredirs ) |
| #define preverrout_fd (G_var.preverrout_fd) |
| #define vartab (G_var.vartab ) |
| #define varinit (G_var.varinit ) |
| #define INIT_G_var() do { \ |
| unsigned i; \ |
| (*(struct globals_var**)&ash_ptr_to_globals_var) = xzalloc(sizeof(G_var)); \ |
| barrier(); \ |
| for (i = 0; i < ARRAY_SIZE(varinit_data); i++) { \ |
| varinit[i].flags = varinit_data[i].flags; \ |
| varinit[i].text = varinit_data[i].text; \ |
| varinit[i].func = varinit_data[i].func; \ |
| } \ |
| } while (0) |
| |
| #define vifs varinit[0] |
| #if ENABLE_ASH_MAIL |
| # define vmail (&vifs)[1] |
| # define vmpath (&vmail)[1] |
| # define vpath (&vmpath)[1] |
| #else |
| # define vpath (&vifs)[1] |
| #endif |
| #define vps1 (&vpath)[1] |
| #define vps2 (&vps1)[1] |
| #define vps4 (&vps2)[1] |
| #if ENABLE_ASH_GETOPTS |
| # define voptind (&vps4)[1] |
| # if ENABLE_ASH_RANDOM_SUPPORT |
| # define vrandom (&voptind)[1] |
| # endif |
| #else |
| # if ENABLE_ASH_RANDOM_SUPPORT |
| # define vrandom (&vps4)[1] |
| # endif |
| #endif |
| |
| /* |
| * The following macros access the values of the above variables. |
| * They have to skip over the name. They return the null string |
| * for unset variables. |
| */ |
| #define ifsval() (vifs.text + 4) |
| #define ifsset() ((vifs.flags & VUNSET) == 0) |
| #if ENABLE_ASH_MAIL |
| # define mailval() (vmail.text + 5) |
| # define mpathval() (vmpath.text + 9) |
| # define mpathset() ((vmpath.flags & VUNSET) == 0) |
| #endif |
| #define pathval() (vpath.text + 5) |
| #define ps1val() (vps1.text + 4) |
| #define ps2val() (vps2.text + 4) |
| #define ps4val() (vps4.text + 4) |
| #if ENABLE_ASH_GETOPTS |
| # define optindval() (voptind.text + 7) |
| #endif |
| |
| |
| #define is_name(c) ((c) == '_' || isalpha((unsigned char)(c))) |
| #define is_in_name(c) ((c) == '_' || isalnum((unsigned char)(c))) |
| |
| #if ENABLE_ASH_GETOPTS |
| static void |
| getoptsreset(const char *value) |
| { |
| shellparam.optind = number(value); |
| shellparam.optoff = -1; |
| } |
| #endif |
| |
| /* |
| * Return of a legal variable name (a letter or underscore followed by zero or |
| * more letters, underscores, and digits). |
| */ |
| static char * |
| endofname(const char *name) |
| { |
| char *p; |
| |
| p = (char *) name; |
| if (!is_name(*p)) |
| return p; |
| while (*++p) { |
| if (!is_in_name(*p)) |
| break; |
| } |
| return p; |
| } |
| |
| /* |
| * Compares two strings up to the first = or '\0'. The first |
| * string must be terminated by '='; the second may be terminated by |
| * either '=' or '\0'. |
| */ |
| static int |
| varcmp(const char *p, const char *q) |
| { |
| int c, d; |
| |
| while ((c = *p) == (d = *q)) { |
| if (!c || c == '=') |
| goto out; |
| p++; |
| q++; |
| } |
| if (c == '=') |
| c = '\0'; |
| if (d == '=') |
| d = '\0'; |
| out: |
| return c - d; |
| } |
| |
| static int |
| varequal(const char *a, const char *b) |
| { |
| return !varcmp(a, b); |
| } |
| |
| /* |
| * Find the appropriate entry in the hash table from the name. |
| */ |
| static struct var ** |
| hashvar(const char *p) |
| { |
| unsigned hashval; |
| |
| hashval = ((unsigned char) *p) << 4; |
| while (*p && *p != '=') |
| hashval += (unsigned char) *p++; |
| return &vartab[hashval % VTABSIZE]; |
| } |
| |
| static int |
| vpcmp(const void *a, const void *b) |
| { |
| return varcmp(*(const char **)a, *(const char **)b); |
| } |
| |
| /* |
| * This routine initializes the builtin variables. |
| */ |
| static void |
| initvar(void) |
| { |
| struct var *vp; |
| struct var *end; |
| struct var **vpp; |
| |
| /* |
| * PS1 depends on uid |
| */ |
| #if ENABLE_FEATURE_EDITING && ENABLE_FEATURE_EDITING_FANCY_PROMPT |
| vps1.text = "PS1=\\w \\$ "; |
| #else |
| if (!geteuid()) |
| vps1.text = "PS1=# "; |
| #endif |
| vp = varinit; |
| end = vp + ARRAY_SIZE(varinit); |
| do { |
| vpp = hashvar(vp->text); |
| vp->next = *vpp; |
| *vpp = vp; |
| } while (++vp < end); |
| } |
| |
| static struct var ** |
| findvar(struct var **vpp, const char *name) |
| { |
| for (; *vpp; vpp = &(*vpp)->next) { |
| if (varequal((*vpp)->text, name)) { |
| break; |
| } |
| } |
| return vpp; |
| } |
| |
| /* |
| * Find the value of a variable. Returns NULL if not set. |
| */ |
| static char * |
| lookupvar(const char *name) |
| { |
| struct var *v; |
| |
| v = *findvar(hashvar(name), name); |
| if (v) { |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| /* |
| * Dynamic variables are implemented roughly the same way they are |
| * in bash. Namely, they're "special" so long as they aren't unset. |
| * As soon as they're unset, they're no longer dynamic, and dynamic |
| * lookup will no longer happen at that point. -- PFM. |
| */ |
| if ((v->flags & VDYNAMIC)) |
| (*v->func)(NULL); |
| #endif |
| if (!(v->flags & VUNSET)) |
| return strchrnul(v->text, '=') + 1; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Search the environment of a builtin command. |
| */ |
| static char * |
| bltinlookup(const char *name) |
| { |
| struct strlist *sp; |
| |
| for (sp = cmdenviron; sp; sp = sp->next) { |
| if (varequal(sp->text, name)) |
| return strchrnul(sp->text, '=') + 1; |
| } |
| return lookupvar(name); |
| } |
| |
| /* |
| * Same as setvar except that the variable and value are passed in |
| * the first argument as name=value. Since the first argument will |
| * be actually stored in the table, it should not be a string that |
| * will go away. |
| * Called with interrupts off. |
| */ |
| static void |
| setvareq(char *s, int flags) |
| { |
| struct var *vp, **vpp; |
| |
| vpp = hashvar(s); |
| flags |= (VEXPORT & (((unsigned) (1 - aflag)) - 1)); |
| vp = *findvar(vpp, s); |
| if (vp) { |
| if ((vp->flags & (VREADONLY|VDYNAMIC)) == VREADONLY) { |
| const char *n; |
| |
| if (flags & VNOSAVE) |
| free(s); |
| n = vp->text; |
| ash_msg_and_raise_error("%.*s: is read only", strchrnul(n, '=') - n, n); |
| } |
| |
| if (flags & VNOSET) |
| return; |
| |
| if (vp->func && (flags & VNOFUNC) == 0) |
| (*vp->func)(strchrnul(s, '=') + 1); |
| |
| if ((vp->flags & (VTEXTFIXED|VSTACK)) == 0) |
| free((char*)vp->text); |
| |
| flags |= vp->flags & ~(VTEXTFIXED|VSTACK|VNOSAVE|VUNSET); |
| } else { |
| if (flags & VNOSET) |
| return; |
| /* not found */ |
| vp = ckzalloc(sizeof(*vp)); |
| vp->next = *vpp; |
| /*vp->func = NULL; - ckzalloc did it */ |
| *vpp = vp; |
| } |
| if (!(flags & (VTEXTFIXED|VSTACK|VNOSAVE))) |
| s = ckstrdup(s); |
| vp->text = s; |
| vp->flags = flags; |
| } |
| |
| /* |
| * Set the value of a variable. The flags argument is ored with the |
| * flags of the variable. If val is NULL, the variable is unset. |
| */ |
| static void |
| setvar(const char *name, const char *val, int flags) |
| { |
| char *p, *q; |
| size_t namelen; |
| char *nameeq; |
| size_t vallen; |
| |
| q = endofname(name); |
| p = strchrnul(q, '='); |
| namelen = p - name; |
| if (!namelen || p != q) |
| ash_msg_and_raise_error("%.*s: bad variable name", namelen, name); |
| vallen = 0; |
| if (val == NULL) { |
| flags |= VUNSET; |
| } else { |
| vallen = strlen(val); |
| } |
| INT_OFF; |
| nameeq = ckmalloc(namelen + vallen + 2); |
| p = (char *)memcpy(nameeq, name, namelen) + namelen; |
| if (val) { |
| *p++ = '='; |
| p = (char *)memcpy(p, val, vallen) + vallen; |
| } |
| *p = '\0'; |
| setvareq(nameeq, flags | VNOSAVE); |
| INT_ON; |
| } |
| |
| #if ENABLE_ASH_GETOPTS |
| /* |
| * Safe version of setvar, returns 1 on success 0 on failure. |
| */ |
| static int |
| setvarsafe(const char *name, const char *val, int flags) |
| { |
| int err; |
| volatile int saveint; |
| struct jmploc *volatile savehandler = exception_handler; |
| struct jmploc jmploc; |
| |
| SAVE_INT(saveint); |
| if (setjmp(jmploc.loc)) |
| err = 1; |
| else { |
| exception_handler = &jmploc; |
| setvar(name, val, flags); |
| err = 0; |
| } |
| exception_handler = savehandler; |
| RESTORE_INT(saveint); |
| return err; |
| } |
| #endif |
| |
| /* |
| * Unset the specified variable. |
| */ |
| static int |
| unsetvar(const char *s) |
| { |
| struct var **vpp; |
| struct var *vp; |
| int retval; |
| |
| vpp = findvar(hashvar(s), s); |
| vp = *vpp; |
| retval = 2; |
| if (vp) { |
| int flags = vp->flags; |
| |
| retval = 1; |
| if (flags & VREADONLY) |
| goto out; |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| vp->flags &= ~VDYNAMIC; |
| #endif |
| if (flags & VUNSET) |
| goto ok; |
| if ((flags & VSTRFIXED) == 0) { |
| INT_OFF; |
| if ((flags & (VTEXTFIXED|VSTACK)) == 0) |
| free((char*)vp->text); |
| *vpp = vp->next; |
| free(vp); |
| INT_ON; |
| } else { |
| setvar(s, 0, 0); |
| vp->flags &= ~VEXPORT; |
| } |
| ok: |
| retval = 0; |
| } |
| out: |
| return retval; |
| } |
| |
| /* |
| * Process a linked list of variable assignments. |
| */ |
| static void |
| listsetvar(struct strlist *list_set_var, int flags) |
| { |
| struct strlist *lp = list_set_var; |
| |
| if (!lp) |
| return; |
| INT_OFF; |
| do { |
| setvareq(lp->text, flags); |
| lp = lp->next; |
| } while (lp); |
| INT_ON; |
| } |
| |
| /* |
| * Generate a list of variables satisfying the given conditions. |
| */ |
| static char ** |
| listvars(int on, int off, char ***end) |
| { |
| struct var **vpp; |
| struct var *vp; |
| char **ep; |
| int mask; |
| |
| STARTSTACKSTR(ep); |
| vpp = vartab; |
| mask = on | off; |
| do { |
| for (vp = *vpp; vp; vp = vp->next) { |
| if ((vp->flags & mask) == on) { |
| if (ep == stackstrend()) |
| ep = growstackstr(); |
| *ep++ = (char *) vp->text; |
| } |
| } |
| } while (++vpp < vartab + VTABSIZE); |
| if (ep == stackstrend()) |
| ep = growstackstr(); |
| if (end) |
| *end = ep; |
| *ep++ = NULL; |
| return grabstackstr(ep); |
| } |
| |
| |
| /* ============ Path search helper |
| * |
| * The variable path (passed by reference) should be set to the start |
| * of the path before the first call; padvance will update |
| * this value as it proceeds. Successive calls to padvance will return |
| * the possible path expansions in sequence. If an option (indicated by |
| * a percent sign) appears in the path entry then the global variable |
| * pathopt will be set to point to it; otherwise pathopt will be set to |
| * NULL. |
| */ |
| static const char *pathopt; /* set by padvance */ |
| |
| static char * |
| padvance(const char **path, const char *name) |
| { |
| const char *p; |
| char *q; |
| const char *start; |
| size_t len; |
| |
| if (*path == NULL) |
| return NULL; |
| start = *path; |
| for (p = start; *p && *p != ':' && *p != '%'; p++) |
| continue; |
| len = p - start + strlen(name) + 2; /* "2" is for '/' and '\0' */ |
| while (stackblocksize() < len) |
| growstackblock(); |
| q = stackblock(); |
| if (p != start) { |
| memcpy(q, start, p - start); |
| q += p - start; |
| *q++ = '/'; |
| } |
| strcpy(q, name); |
| pathopt = NULL; |
| if (*p == '%') { |
| pathopt = ++p; |
| while (*p && *p != ':') |
| p++; |
| } |
| if (*p == ':') |
| *path = p + 1; |
| else |
| *path = NULL; |
| return stalloc(len); |
| } |
| |
| |
| /* ============ Prompt */ |
| |
| static smallint doprompt; /* if set, prompt the user */ |
| static smallint needprompt; /* true if interactive and at start of line */ |
| |
| #if ENABLE_FEATURE_EDITING |
| static line_input_t *line_input_state; |
| static const char *cmdedit_prompt; |
| static void |
| putprompt(const char *s) |
| { |
| if (ENABLE_ASH_EXPAND_PRMT) { |
| free((char*)cmdedit_prompt); |
| cmdedit_prompt = ckstrdup(s); |
| return; |
| } |
| cmdedit_prompt = s; |
| } |
| #else |
| static void |
| putprompt(const char *s) |
| { |
| out2str(s); |
| } |
| #endif |
| |
| #if ENABLE_ASH_EXPAND_PRMT |
| /* expandstr() needs parsing machinery, so it is far away ahead... */ |
| static const char *expandstr(const char *ps); |
| #else |
| #define expandstr(s) s |
| #endif |
| |
| static void |
| setprompt(int whichprompt) |
| { |
| const char *prompt; |
| #if ENABLE_ASH_EXPAND_PRMT |
| struct stackmark smark; |
| #endif |
| |
| needprompt = 0; |
| |
| switch (whichprompt) { |
| case 1: |
| prompt = ps1val(); |
| break; |
| case 2: |
| prompt = ps2val(); |
| break; |
| default: /* 0 */ |
| prompt = nullstr; |
| } |
| #if ENABLE_ASH_EXPAND_PRMT |
| setstackmark(&smark); |
| stalloc(stackblocksize()); |
| #endif |
| putprompt(expandstr(prompt)); |
| #if ENABLE_ASH_EXPAND_PRMT |
| popstackmark(&smark); |
| #endif |
| } |
| |
| |
| /* ============ The cd and pwd commands */ |
| |
| #define CD_PHYSICAL 1 |
| #define CD_PRINT 2 |
| |
| static int docd(const char *, int); |
| |
| static int |
| cdopt(void) |
| { |
| int flags = 0; |
| int i, j; |
| |
| j = 'L'; |
| while ((i = nextopt("LP"))) { |
| if (i != j) { |
| flags ^= CD_PHYSICAL; |
| j = i; |
| } |
| } |
| |
| return flags; |
| } |
| |
| /* |
| * Update curdir (the name of the current directory) in response to a |
| * cd command. |
| */ |
| static const char * |
| updatepwd(const char *dir) |
| { |
| char *new; |
| char *p; |
| char *cdcomppath; |
| const char *lim; |
| |
| cdcomppath = ststrdup(dir); |
| STARTSTACKSTR(new); |
| if (*dir != '/') { |
| if (curdir == nullstr) |
| return 0; |
| new = stack_putstr(curdir, new); |
| } |
| new = makestrspace(strlen(dir) + 2, new); |
| lim = (char *)stackblock() + 1; |
| if (*dir != '/') { |
| if (new[-1] != '/') |
| USTPUTC('/', new); |
| if (new > lim && *lim == '/') |
| lim++; |
| } else { |
| USTPUTC('/', new); |
| cdcomppath++; |
| if (dir[1] == '/' && dir[2] != '/') { |
| USTPUTC('/', new); |
| cdcomppath++; |
| lim++; |
| } |
| } |
| p = strtok(cdcomppath, "/"); |
| while (p) { |
| switch (*p) { |
| case '.': |
| if (p[1] == '.' && p[2] == '\0') { |
| while (new > lim) { |
| STUNPUTC(new); |
| if (new[-1] == '/') |
| break; |
| } |
| break; |
| } |
| if (p[1] == '\0') |
| break; |
| /* fall through */ |
| default: |
| new = stack_putstr(p, new); |
| USTPUTC('/', new); |
| } |
| p = strtok(0, "/"); |
| } |
| if (new > lim) |
| STUNPUTC(new); |
| *new = 0; |
| return stackblock(); |
| } |
| |
| /* |
| * Find out what the current directory is. If we already know the current |
| * directory, this routine returns immediately. |
| */ |
| static char * |
| getpwd(void) |
| { |
| char *dir = getcwd(NULL, 0); /* huh, using glibc extension? */ |
| return dir ? dir : nullstr; |
| } |
| |
| static void |
| setpwd(const char *val, int setold) |
| { |
| char *oldcur, *dir; |
| |
| oldcur = dir = curdir; |
| |
| if (setold) { |
| setvar("OLDPWD", oldcur, VEXPORT); |
| } |
| INT_OFF; |
| if (physdir != nullstr) { |
| if (physdir != oldcur) |
| free(physdir); |
| physdir = nullstr; |
| } |
| if (oldcur == val || !val) { |
| char *s = getpwd(); |
| physdir = s; |
| if (!val) |
| dir = s; |
| } else |
| dir = ckstrdup(val); |
| if (oldcur != dir && oldcur != nullstr) { |
| free(oldcur); |
| } |
| curdir = dir; |
| INT_ON; |
| setvar("PWD", dir, VEXPORT); |
| } |
| |
| static void hashcd(void); |
| |
| /* |
| * Actually do the chdir. We also call hashcd to let the routines in exec.c |
| * know that the current directory has changed. |
| */ |
| static int |
| docd(const char *dest, int flags) |
| { |
| const char *dir = 0; |
| int err; |
| |
| TRACE(("docd(\"%s\", %d) called\n", dest, flags)); |
| |
| INT_OFF; |
| if (!(flags & CD_PHYSICAL)) { |
| dir = updatepwd(dest); |
| if (dir) |
| dest = dir; |
| } |
| err = chdir(dest); |
| if (err) |
| goto out; |
| setpwd(dir, 1); |
| hashcd(); |
| out: |
| INT_ON; |
| return err; |
| } |
| |
| static int |
| cdcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| const char *dest; |
| const char *path; |
| const char *p; |
| char c; |
| struct stat statb; |
| int flags; |
| |
| flags = cdopt(); |
| dest = *argptr; |
| if (!dest) |
| dest = bltinlookup(homestr); |
| else if (LONE_DASH(dest)) { |
| dest = bltinlookup("OLDPWD"); |
| flags |= CD_PRINT; |
| } |
| if (!dest) |
| dest = nullstr; |
| if (*dest == '/') |
| goto step7; |
| if (*dest == '.') { |
| c = dest[1]; |
| dotdot: |
| switch (c) { |
| case '\0': |
| case '/': |
| goto step6; |
| case '.': |
| c = dest[2]; |
| if (c != '.') |
| goto dotdot; |
| } |
| } |
| if (!*dest) |
| dest = "."; |
| path = bltinlookup("CDPATH"); |
| if (!path) { |
| step6: |
| step7: |
| p = dest; |
| goto docd; |
| } |
| do { |
| c = *path; |
| p = padvance(&path, dest); |
| if (stat(p, &statb) >= 0 && S_ISDIR(statb.st_mode)) { |
| if (c && c != ':') |
| flags |= CD_PRINT; |
| docd: |
| if (!docd(p, flags)) |
| goto out; |
| break; |
| } |
| } while (path); |
| ash_msg_and_raise_error("can't cd to %s", dest); |
| /* NOTREACHED */ |
| out: |
| if (flags & CD_PRINT) |
| out1fmt(snlfmt, curdir); |
| return 0; |
| } |
| |
| static int |
| pwdcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| int flags; |
| const char *dir = curdir; |
| |
| flags = cdopt(); |
| if (flags) { |
| if (physdir == nullstr) |
| setpwd(dir, 0); |
| dir = physdir; |
| } |
| out1fmt(snlfmt, dir); |
| return 0; |
| } |
| |
| |
| /* ============ ... */ |
| |
| #define IBUFSIZ COMMON_BUFSIZE |
| #define basebuf bb_common_bufsiz1 /* buffer for top level input file */ |
| |
| /* Syntax classes */ |
| #define CWORD 0 /* character is nothing special */ |
| #define CNL 1 /* newline character */ |
| #define CBACK 2 /* a backslash character */ |
| #define CSQUOTE 3 /* single quote */ |
| #define CDQUOTE 4 /* double quote */ |
| #define CENDQUOTE 5 /* a terminating quote */ |
| #define CBQUOTE 6 /* backwards single quote */ |
| #define CVAR 7 /* a dollar sign */ |
| #define CENDVAR 8 /* a '}' character */ |
| #define CLP 9 /* a left paren in arithmetic */ |
| #define CRP 10 /* a right paren in arithmetic */ |
| #define CENDFILE 11 /* end of file */ |
| #define CCTL 12 /* like CWORD, except it must be escaped */ |
| #define CSPCL 13 /* these terminate a word */ |
| #define CIGN 14 /* character should be ignored */ |
| |
| #if ENABLE_ASH_ALIAS |
| #define SYNBASE 130 |
| #define PEOF -130 |
| #define PEOA -129 |
| #define PEOA_OR_PEOF PEOA |
| #else |
| #define SYNBASE 129 |
| #define PEOF -129 |
| #define PEOA_OR_PEOF PEOF |
| #endif |
| |
| /* number syntax index */ |
| #define BASESYNTAX 0 /* not in quotes */ |
| #define DQSYNTAX 1 /* in double quotes */ |
| #define SQSYNTAX 2 /* in single quotes */ |
| #define ARISYNTAX 3 /* in arithmetic */ |
| #define PSSYNTAX 4 /* prompt */ |
| |
| #if ENABLE_ASH_OPTIMIZE_FOR_SIZE |
| #define USE_SIT_FUNCTION |
| #endif |
| |
| #if ENABLE_ASH_MATH_SUPPORT |
| static const char S_I_T[][4] = { |
| #if ENABLE_ASH_ALIAS |
| { CSPCL, CIGN, CIGN, CIGN }, /* 0, PEOA */ |
| #endif |
| { CSPCL, CWORD, CWORD, CWORD }, /* 1, ' ' */ |
| { CNL, CNL, CNL, CNL }, /* 2, \n */ |
| { CWORD, CCTL, CCTL, CWORD }, /* 3, !*-/:=?[]~ */ |
| { CDQUOTE, CENDQUOTE, CWORD, CWORD }, /* 4, '"' */ |
| { CVAR, CVAR, CWORD, CVAR }, /* 5, $ */ |
| { CSQUOTE, CWORD, CENDQUOTE, CWORD }, /* 6, "'" */ |
| { CSPCL, CWORD, CWORD, CLP }, /* 7, ( */ |
| { CSPCL, CWORD, CWORD, CRP }, /* 8, ) */ |
| { CBACK, CBACK, CCTL, CBACK }, /* 9, \ */ |
| { CBQUOTE, CBQUOTE, CWORD, CBQUOTE }, /* 10, ` */ |
| { CENDVAR, CENDVAR, CWORD, CENDVAR }, /* 11, } */ |
| #ifndef USE_SIT_FUNCTION |
| { CENDFILE, CENDFILE, CENDFILE, CENDFILE }, /* 12, PEOF */ |
| { CWORD, CWORD, CWORD, CWORD }, /* 13, 0-9A-Za-z */ |
| { CCTL, CCTL, CCTL, CCTL } /* 14, CTLESC ... */ |
| #endif |
| }; |
| #else |
| static const char S_I_T[][3] = { |
| #if ENABLE_ASH_ALIAS |
| { CSPCL, CIGN, CIGN }, /* 0, PEOA */ |
| #endif |
| { CSPCL, CWORD, CWORD }, /* 1, ' ' */ |
| { CNL, CNL, CNL }, /* 2, \n */ |
| { CWORD, CCTL, CCTL }, /* 3, !*-/:=?[]~ */ |
| { CDQUOTE, CENDQUOTE, CWORD }, /* 4, '"' */ |
| { CVAR, CVAR, CWORD }, /* 5, $ */ |
| { CSQUOTE, CWORD, CENDQUOTE }, /* 6, "'" */ |
| { CSPCL, CWORD, CWORD }, /* 7, ( */ |
| { CSPCL, CWORD, CWORD }, /* 8, ) */ |
| { CBACK, CBACK, CCTL }, /* 9, \ */ |
| { CBQUOTE, CBQUOTE, CWORD }, /* 10, ` */ |
| { CENDVAR, CENDVAR, CWORD }, /* 11, } */ |
| #ifndef USE_SIT_FUNCTION |
| { CENDFILE, CENDFILE, CENDFILE }, /* 12, PEOF */ |
| { CWORD, CWORD, CWORD }, /* 13, 0-9A-Za-z */ |
| { CCTL, CCTL, CCTL } /* 14, CTLESC ... */ |
| #endif |
| }; |
| #endif /* ASH_MATH_SUPPORT */ |
| |
| #ifdef USE_SIT_FUNCTION |
| |
| static int |
| SIT(int c, int syntax) |
| { |
| static const char spec_symbls[] ALIGN1 = "\t\n !\"$&'()*-/:;<=>?[\\]`|}~"; |
| #if ENABLE_ASH_ALIAS |
| static const char syntax_index_table[] ALIGN1 = { |
| 1, 2, 1, 3, 4, 5, 1, 6, /* "\t\n !\"$&'" */ |
| 7, 8, 3, 3, 3, 3, 1, 1, /* "()*-/:;<" */ |
| 3, 1, 3, 3, 9, 3, 10, 1, /* "=>?[\\]`|" */ |
| 11, 3 /* "}~" */ |
| }; |
| #else |
| static const char syntax_index_table[] ALIGN1 = { |
| 0, 1, 0, 2, 3, 4, 0, 5, /* "\t\n !\"$&'" */ |
| 6, 7, 2, 2, 2, 2, 0, 0, /* "()*-/:;<" */ |
| 2, 0, 2, 2, 8, 2, 9, 0, /* "=>?[\\]`|" */ |
| 10, 2 /* "}~" */ |
| }; |
| #endif |
| const char *s; |
| int indx; |
| |
| if (c == PEOF) /* 2^8+2 */ |
| return CENDFILE; |
| #if ENABLE_ASH_ALIAS |
| if (c == PEOA) /* 2^8+1 */ |
| indx = 0; |
| else |
| #endif |
| #define U_C(c) ((unsigned char)(c)) |
| |
| if ((unsigned char)c >= (unsigned char)(CTLESC) |
| && (unsigned char)c <= (unsigned char)(CTLQUOTEMARK) |
| ) { |
| return CCTL; |
| } else { |
| s = strchrnul(spec_symbls, c); |
| if (*s == '\0') |
| return CWORD; |
| indx = syntax_index_table[s - spec_symbls]; |
| } |
| return S_I_T[indx][syntax]; |
| } |
| |
| #else /* !USE_SIT_FUNCTION */ |
| |
| #if ENABLE_ASH_ALIAS |
| #define CSPCL_CIGN_CIGN_CIGN 0 |
| #define CSPCL_CWORD_CWORD_CWORD 1 |
| #define CNL_CNL_CNL_CNL 2 |
| #define CWORD_CCTL_CCTL_CWORD 3 |
| #define CDQUOTE_CENDQUOTE_CWORD_CWORD 4 |
| #define CVAR_CVAR_CWORD_CVAR 5 |
| #define CSQUOTE_CWORD_CENDQUOTE_CWORD 6 |
| #define CSPCL_CWORD_CWORD_CLP 7 |
| #define CSPCL_CWORD_CWORD_CRP 8 |
| #define CBACK_CBACK_CCTL_CBACK 9 |
| #define CBQUOTE_CBQUOTE_CWORD_CBQUOTE 10 |
| #define CENDVAR_CENDVAR_CWORD_CENDVAR 11 |
| #define CENDFILE_CENDFILE_CENDFILE_CENDFILE 12 |
| #define CWORD_CWORD_CWORD_CWORD 13 |
| #define CCTL_CCTL_CCTL_CCTL 14 |
| #else |
| #define CSPCL_CWORD_CWORD_CWORD 0 |
| #define CNL_CNL_CNL_CNL 1 |
| #define CWORD_CCTL_CCTL_CWORD 2 |
| #define CDQUOTE_CENDQUOTE_CWORD_CWORD 3 |
| #define CVAR_CVAR_CWORD_CVAR 4 |
| #define CSQUOTE_CWORD_CENDQUOTE_CWORD 5 |
| #define CSPCL_CWORD_CWORD_CLP 6 |
| #define CSPCL_CWORD_CWORD_CRP 7 |
| #define CBACK_CBACK_CCTL_CBACK 8 |
| #define CBQUOTE_CBQUOTE_CWORD_CBQUOTE 9 |
| #define CENDVAR_CENDVAR_CWORD_CENDVAR 10 |
| #define CENDFILE_CENDFILE_CENDFILE_CENDFILE 11 |
| #define CWORD_CWORD_CWORD_CWORD 12 |
| #define CCTL_CCTL_CCTL_CCTL 13 |
| #endif |
| |
| static const char syntax_index_table[258] = { |
| /* BASESYNTAX_DQSYNTAX_SQSYNTAX_ARISYNTAX */ |
| /* 0 PEOF */ CENDFILE_CENDFILE_CENDFILE_CENDFILE, |
| #if ENABLE_ASH_ALIAS |
| /* 1 PEOA */ CSPCL_CIGN_CIGN_CIGN, |
| #endif |
| /* 2 -128 0x80 */ CWORD_CWORD_CWORD_CWORD, |
| /* 3 -127 CTLESC */ CCTL_CCTL_CCTL_CCTL, |
| /* 4 -126 CTLVAR */ CCTL_CCTL_CCTL_CCTL, |
| /* 5 -125 CTLENDVAR */ CCTL_CCTL_CCTL_CCTL, |
| /* 6 -124 CTLBACKQ */ CCTL_CCTL_CCTL_CCTL, |
| /* 7 -123 CTLQUOTE */ CCTL_CCTL_CCTL_CCTL, |
| /* 8 -122 CTLARI */ CCTL_CCTL_CCTL_CCTL, |
| /* 9 -121 CTLENDARI */ CCTL_CCTL_CCTL_CCTL, |
| /* 10 -120 CTLQUOTEMARK */ CCTL_CCTL_CCTL_CCTL, |
| /* 11 -119 */ CWORD_CWORD_CWORD_CWORD, |
| /* 12 -118 */ CWORD_CWORD_CWORD_CWORD, |
| /* 13 -117 */ CWORD_CWORD_CWORD_CWORD, |
| /* 14 -116 */ CWORD_CWORD_CWORD_CWORD, |
| /* 15 -115 */ CWORD_CWORD_CWORD_CWORD, |
| /* 16 -114 */ CWORD_CWORD_CWORD_CWORD, |
| /* 17 -113 */ CWORD_CWORD_CWORD_CWORD, |
| /* 18 -112 */ CWORD_CWORD_CWORD_CWORD, |
| /* 19 -111 */ CWORD_CWORD_CWORD_CWORD, |
| /* 20 -110 */ CWORD_CWORD_CWORD_CWORD, |
| /* 21 -109 */ CWORD_CWORD_CWORD_CWORD, |
| /* 22 -108 */ CWORD_CWORD_CWORD_CWORD, |
| /* 23 -107 */ CWORD_CWORD_CWORD_CWORD, |
| /* 24 -106 */ CWORD_CWORD_CWORD_CWORD, |
| /* 25 -105 */ CWORD_CWORD_CWORD_CWORD, |
| /* 26 -104 */ CWORD_CWORD_CWORD_CWORD, |
| /* 27 -103 */ CWORD_CWORD_CWORD_CWORD, |
| /* 28 -102 */ CWORD_CWORD_CWORD_CWORD, |
| /* 29 -101 */ CWORD_CWORD_CWORD_CWORD, |
| /* 30 -100 */ CWORD_CWORD_CWORD_CWORD, |
| /* 31 -99 */ CWORD_CWORD_CWORD_CWORD, |
| /* 32 -98 */ CWORD_CWORD_CWORD_CWORD, |
| /* 33 -97 */ CWORD_CWORD_CWORD_CWORD, |
| /* 34 -96 */ CWORD_CWORD_CWORD_CWORD, |
| /* 35 -95 */ CWORD_CWORD_CWORD_CWORD, |
| /* 36 -94 */ CWORD_CWORD_CWORD_CWORD, |
| /* 37 -93 */ CWORD_CWORD_CWORD_CWORD, |
| /* 38 -92 */ CWORD_CWORD_CWORD_CWORD, |
| /* 39 -91 */ CWORD_CWORD_CWORD_CWORD, |
| /* 40 -90 */ CWORD_CWORD_CWORD_CWORD, |
| /* 41 -89 */ CWORD_CWORD_CWORD_CWORD, |
| /* 42 -88 */ CWORD_CWORD_CWORD_CWORD, |
| /* 43 -87 */ CWORD_CWORD_CWORD_CWORD, |
| /* 44 -86 */ CWORD_CWORD_CWORD_CWORD, |
| /* 45 -85 */ CWORD_CWORD_CWORD_CWORD, |
| /* 46 -84 */ CWORD_CWORD_CWORD_CWORD, |
| /* 47 -83 */ CWORD_CWORD_CWORD_CWORD, |
| /* 48 -82 */ CWORD_CWORD_CWORD_CWORD, |
| /* 49 -81 */ CWORD_CWORD_CWORD_CWORD, |
| /* 50 -80 */ CWORD_CWORD_CWORD_CWORD, |
| /* 51 -79 */ CWORD_CWORD_CWORD_CWORD, |
| /* 52 -78 */ CWORD_CWORD_CWORD_CWORD, |
| /* 53 -77 */ CWORD_CWORD_CWORD_CWORD, |
| /* 54 -76 */ CWORD_CWORD_CWORD_CWORD, |
| /* 55 -75 */ CWORD_CWORD_CWORD_CWORD, |
| /* 56 -74 */ CWORD_CWORD_CWORD_CWORD, |
| /* 57 -73 */ CWORD_CWORD_CWORD_CWORD, |
| /* 58 -72 */ CWORD_CWORD_CWORD_CWORD, |
| /* 59 -71 */ CWORD_CWORD_CWORD_CWORD, |
| /* 60 -70 */ CWORD_CWORD_CWORD_CWORD, |
| /* 61 -69 */ CWORD_CWORD_CWORD_CWORD, |
| /* 62 -68 */ CWORD_CWORD_CWORD_CWORD, |
| /* 63 -67 */ CWORD_CWORD_CWORD_CWORD, |
| /* 64 -66 */ CWORD_CWORD_CWORD_CWORD, |
| /* 65 -65 */ CWORD_CWORD_CWORD_CWORD, |
| /* 66 -64 */ CWORD_CWORD_CWORD_CWORD, |
| /* 67 -63 */ CWORD_CWORD_CWORD_CWORD, |
| /* 68 -62 */ CWORD_CWORD_CWORD_CWORD, |
| /* 69 -61 */ CWORD_CWORD_CWORD_CWORD, |
| /* 70 -60 */ CWORD_CWORD_CWORD_CWORD, |
| /* 71 -59 */ CWORD_CWORD_CWORD_CWORD, |
| /* 72 -58 */ CWORD_CWORD_CWORD_CWORD, |
| /* 73 -57 */ CWORD_CWORD_CWORD_CWORD, |
| /* 74 -56 */ CWORD_CWORD_CWORD_CWORD, |
| /* 75 -55 */ CWORD_CWORD_CWORD_CWORD, |
| /* 76 -54 */ CWORD_CWORD_CWORD_CWORD, |
| /* 77 -53 */ CWORD_CWORD_CWORD_CWORD, |
| /* 78 -52 */ CWORD_CWORD_CWORD_CWORD, |
| /* 79 -51 */ CWORD_CWORD_CWORD_CWORD, |
| /* 80 -50 */ CWORD_CWORD_CWORD_CWORD, |
| /* 81 -49 */ CWORD_CWORD_CWORD_CWORD, |
| /* 82 -48 */ CWORD_CWORD_CWORD_CWORD, |
| /* 83 -47 */ CWORD_CWORD_CWORD_CWORD, |
| /* 84 -46 */ CWORD_CWORD_CWORD_CWORD, |
| /* 85 -45 */ CWORD_CWORD_CWORD_CWORD, |
| /* 86 -44 */ CWORD_CWORD_CWORD_CWORD, |
| /* 87 -43 */ CWORD_CWORD_CWORD_CWORD, |
| /* 88 -42 */ CWORD_CWORD_CWORD_CWORD, |
| /* 89 -41 */ CWORD_CWORD_CWORD_CWORD, |
| /* 90 -40 */ CWORD_CWORD_CWORD_CWORD, |
| /* 91 -39 */ CWORD_CWORD_CWORD_CWORD, |
| /* 92 -38 */ CWORD_CWORD_CWORD_CWORD, |
| /* 93 -37 */ CWORD_CWORD_CWORD_CWORD, |
| /* 94 -36 */ CWORD_CWORD_CWORD_CWORD, |
| /* 95 -35 */ CWORD_CWORD_CWORD_CWORD, |
| /* 96 -34 */ CWORD_CWORD_CWORD_CWORD, |
| /* 97 -33 */ CWORD_CWORD_CWORD_CWORD, |
| /* 98 -32 */ CWORD_CWORD_CWORD_CWORD, |
| /* 99 -31 */ CWORD_CWORD_CWORD_CWORD, |
| /* 100 -30 */ CWORD_CWORD_CWORD_CWORD, |
| /* 101 -29 */ CWORD_CWORD_CWORD_CWORD, |
| /* 102 -28 */ CWORD_CWORD_CWORD_CWORD, |
| /* 103 -27 */ CWORD_CWORD_CWORD_CWORD, |
| /* 104 -26 */ CWORD_CWORD_CWORD_CWORD, |
| /* 105 -25 */ CWORD_CWORD_CWORD_CWORD, |
| /* 106 -24 */ CWORD_CWORD_CWORD_CWORD, |
| /* 107 -23 */ CWORD_CWORD_CWORD_CWORD, |
| /* 108 -22 */ CWORD_CWORD_CWORD_CWORD, |
| /* 109 -21 */ CWORD_CWORD_CWORD_CWORD, |
| /* 110 -20 */ CWORD_CWORD_CWORD_CWORD, |
| /* 111 -19 */ CWORD_CWORD_CWORD_CWORD, |
| /* 112 -18 */ CWORD_CWORD_CWORD_CWORD, |
| /* 113 -17 */ CWORD_CWORD_CWORD_CWORD, |
| /* 114 -16 */ CWORD_CWORD_CWORD_CWORD, |
| /* 115 -15 */ CWORD_CWORD_CWORD_CWORD, |
| /* 116 -14 */ CWORD_CWORD_CWORD_CWORD, |
| /* 117 -13 */ CWORD_CWORD_CWORD_CWORD, |
| /* 118 -12 */ CWORD_CWORD_CWORD_CWORD, |
| /* 119 -11 */ CWORD_CWORD_CWORD_CWORD, |
| /* 120 -10 */ CWORD_CWORD_CWORD_CWORD, |
| /* 121 -9 */ CWORD_CWORD_CWORD_CWORD, |
| /* 122 -8 */ CWORD_CWORD_CWORD_CWORD, |
| /* 123 -7 */ CWORD_CWORD_CWORD_CWORD, |
| /* 124 -6 */ CWORD_CWORD_CWORD_CWORD, |
| /* 125 -5 */ CWORD_CWORD_CWORD_CWORD, |
| /* 126 -4 */ CWORD_CWORD_CWORD_CWORD, |
| /* 127 -3 */ CWORD_CWORD_CWORD_CWORD, |
| /* 128 -2 */ CWORD_CWORD_CWORD_CWORD, |
| /* 129 -1 */ CWORD_CWORD_CWORD_CWORD, |
| /* 130 0 */ CWORD_CWORD_CWORD_CWORD, |
| /* 131 1 */ CWORD_CWORD_CWORD_CWORD, |
| /* 132 2 */ CWORD_CWORD_CWORD_CWORD, |
| /* 133 3 */ CWORD_CWORD_CWORD_CWORD, |
| /* 134 4 */ CWORD_CWORD_CWORD_CWORD, |
| /* 135 5 */ CWORD_CWORD_CWORD_CWORD, |
| /* 136 6 */ CWORD_CWORD_CWORD_CWORD, |
| /* 137 7 */ CWORD_CWORD_CWORD_CWORD, |
| /* 138 8 */ CWORD_CWORD_CWORD_CWORD, |
| /* 139 9 "\t" */ CSPCL_CWORD_CWORD_CWORD, |
| /* 140 10 "\n" */ CNL_CNL_CNL_CNL, |
| /* 141 11 */ CWORD_CWORD_CWORD_CWORD, |
| /* 142 12 */ CWORD_CWORD_CWORD_CWORD, |
| /* 143 13 */ CWORD_CWORD_CWORD_CWORD, |
| /* 144 14 */ CWORD_CWORD_CWORD_CWORD, |
| /* 145 15 */ CWORD_CWORD_CWORD_CWORD, |
| /* 146 16 */ CWORD_CWORD_CWORD_CWORD, |
| /* 147 17 */ CWORD_CWORD_CWORD_CWORD, |
| /* 148 18 */ CWORD_CWORD_CWORD_CWORD, |
| /* 149 19 */ CWORD_CWORD_CWORD_CWORD, |
| /* 150 20 */ CWORD_CWORD_CWORD_CWORD, |
| /* 151 21 */ CWORD_CWORD_CWORD_CWORD, |
| /* 152 22 */ CWORD_CWORD_CWORD_CWORD, |
| /* 153 23 */ CWORD_CWORD_CWORD_CWORD, |
| /* 154 24 */ CWORD_CWORD_CWORD_CWORD, |
| /* 155 25 */ CWORD_CWORD_CWORD_CWORD, |
| /* 156 26 */ CWORD_CWORD_CWORD_CWORD, |
| /* 157 27 */ CWORD_CWORD_CWORD_CWORD, |
| /* 158 28 */ CWORD_CWORD_CWORD_CWORD, |
| /* 159 29 */ CWORD_CWORD_CWORD_CWORD, |
| /* 160 30 */ CWORD_CWORD_CWORD_CWORD, |
| /* 161 31 */ CWORD_CWORD_CWORD_CWORD, |
| /* 162 32 " " */ CSPCL_CWORD_CWORD_CWORD, |
| /* 163 33 "!" */ CWORD_CCTL_CCTL_CWORD, |
| /* 164 34 """ */ CDQUOTE_CENDQUOTE_CWORD_CWORD, |
| /* 165 35 "#" */ CWORD_CWORD_CWORD_CWORD, |
| /* 166 36 "$" */ CVAR_CVAR_CWORD_CVAR, |
| /* 167 37 "%" */ CWORD_CWORD_CWORD_CWORD, |
| /* 168 38 "&" */ CSPCL_CWORD_CWORD_CWORD, |
| /* 169 39 "'" */ CSQUOTE_CWORD_CENDQUOTE_CWORD, |
| /* 170 40 "(" */ CSPCL_CWORD_CWORD_CLP, |
| /* 171 41 ")" */ CSPCL_CWORD_CWORD_CRP, |
| /* 172 42 "*" */ CWORD_CCTL_CCTL_CWORD, |
| /* 173 43 "+" */ CWORD_CWORD_CWORD_CWORD, |
| /* 174 44 "," */ CWORD_CWORD_CWORD_CWORD, |
| /* 175 45 "-" */ CWORD_CCTL_CCTL_CWORD, |
| /* 176 46 "." */ CWORD_CWORD_CWORD_CWORD, |
| /* 177 47 "/" */ CWORD_CCTL_CCTL_CWORD, |
| /* 178 48 "0" */ CWORD_CWORD_CWORD_CWORD, |
| /* 179 49 "1" */ CWORD_CWORD_CWORD_CWORD, |
| /* 180 50 "2" */ CWORD_CWORD_CWORD_CWORD, |
| /* 181 51 "3" */ CWORD_CWORD_CWORD_CWORD, |
| /* 182 52 "4" */ CWORD_CWORD_CWORD_CWORD, |
| /* 183 53 "5" */ CWORD_CWORD_CWORD_CWORD, |
| /* 184 54 "6" */ CWORD_CWORD_CWORD_CWORD, |
| /* 185 55 "7" */ CWORD_CWORD_CWORD_CWORD, |
| /* 186 56 "8" */ CWORD_CWORD_CWORD_CWORD, |
| /* 187 57 "9" */ CWORD_CWORD_CWORD_CWORD, |
| /* 188 58 ":" */ CWORD_CCTL_CCTL_CWORD, |
| /* 189 59 ";" */ CSPCL_CWORD_CWORD_CWORD, |
| /* 190 60 "<" */ CSPCL_CWORD_CWORD_CWORD, |
| /* 191 61 "=" */ CWORD_CCTL_CCTL_CWORD, |
| /* 192 62 ">" */ CSPCL_CWORD_CWORD_CWORD, |
| /* 193 63 "?" */ CWORD_CCTL_CCTL_CWORD, |
| /* 194 64 "@" */ CWORD_CWORD_CWORD_CWORD, |
| /* 195 65 "A" */ CWORD_CWORD_CWORD_CWORD, |
| /* 196 66 "B" */ CWORD_CWORD_CWORD_CWORD, |
| /* 197 67 "C" */ CWORD_CWORD_CWORD_CWORD, |
| /* 198 68 "D" */ CWORD_CWORD_CWORD_CWORD, |
| /* 199 69 "E" */ CWORD_CWORD_CWORD_CWORD, |
| /* 200 70 "F" */ CWORD_CWORD_CWORD_CWORD, |
| /* 201 71 "G" */ CWORD_CWORD_CWORD_CWORD, |
| /* 202 72 "H" */ CWORD_CWORD_CWORD_CWORD, |
| /* 203 73 "I" */ CWORD_CWORD_CWORD_CWORD, |
| /* 204 74 "J" */ CWORD_CWORD_CWORD_CWORD, |
| /* 205 75 "K" */ CWORD_CWORD_CWORD_CWORD, |
| /* 206 76 "L" */ CWORD_CWORD_CWORD_CWORD, |
| /* 207 77 "M" */ CWORD_CWORD_CWORD_CWORD, |
| /* 208 78 "N" */ CWORD_CWORD_CWORD_CWORD, |
| /* 209 79 "O" */ CWORD_CWORD_CWORD_CWORD, |
| /* 210 80 "P" */ CWORD_CWORD_CWORD_CWORD, |
| /* 211 81 "Q" */ CWORD_CWORD_CWORD_CWORD, |
| /* 212 82 "R" */ CWORD_CWORD_CWORD_CWORD, |
| /* 213 83 "S" */ CWORD_CWORD_CWORD_CWORD, |
| /* 214 84 "T" */ CWORD_CWORD_CWORD_CWORD, |
| /* 215 85 "U" */ CWORD_CWORD_CWORD_CWORD, |
| /* 216 86 "V" */ CWORD_CWORD_CWORD_CWORD, |
| /* 217 87 "W" */ CWORD_CWORD_CWORD_CWORD, |
| /* 218 88 "X" */ CWORD_CWORD_CWORD_CWORD, |
| /* 219 89 "Y" */ CWORD_CWORD_CWORD_CWORD, |
| /* 220 90 "Z" */ CWORD_CWORD_CWORD_CWORD, |
| /* 221 91 "[" */ CWORD_CCTL_CCTL_CWORD, |
| /* 222 92 "\" */ CBACK_CBACK_CCTL_CBACK, |
| /* 223 93 "]" */ CWORD_CCTL_CCTL_CWORD, |
| /* 224 94 "^" */ CWORD_CWORD_CWORD_CWORD, |
| /* 225 95 "_" */ CWORD_CWORD_CWORD_CWORD, |
| /* 226 96 "`" */ CBQUOTE_CBQUOTE_CWORD_CBQUOTE, |
| /* 227 97 "a" */ CWORD_CWORD_CWORD_CWORD, |
| /* 228 98 "b" */ CWORD_CWORD_CWORD_CWORD, |
| /* 229 99 "c" */ CWORD_CWORD_CWORD_CWORD, |
| /* 230 100 "d" */ CWORD_CWORD_CWORD_CWORD, |
| /* 231 101 "e" */ CWORD_CWORD_CWORD_CWORD, |
| /* 232 102 "f" */ CWORD_CWORD_CWORD_CWORD, |
| /* 233 103 "g" */ CWORD_CWORD_CWORD_CWORD, |
| /* 234 104 "h" */ CWORD_CWORD_CWORD_CWORD, |
| /* 235 105 "i" */ CWORD_CWORD_CWORD_CWORD, |
| /* 236 106 "j" */ CWORD_CWORD_CWORD_CWORD, |
| /* 237 107 "k" */ CWORD_CWORD_CWORD_CWORD, |
| /* 238 108 "l" */ CWORD_CWORD_CWORD_CWORD, |
| /* 239 109 "m" */ CWORD_CWORD_CWORD_CWORD, |
| /* 240 110 "n" */ CWORD_CWORD_CWORD_CWORD, |
| /* 241 111 "o" */ CWORD_CWORD_CWORD_CWORD, |
| /* 242 112 "p" */ CWORD_CWORD_CWORD_CWORD, |
| /* 243 113 "q" */ CWORD_CWORD_CWORD_CWORD, |
| /* 244 114 "r" */ CWORD_CWORD_CWORD_CWORD, |
| /* 245 115 "s" */ CWORD_CWORD_CWORD_CWORD, |
| /* 246 116 "t" */ CWORD_CWORD_CWORD_CWORD, |
| /* 247 117 "u" */ CWORD_CWORD_CWORD_CWORD, |
| /* 248 118 "v" */ CWORD_CWORD_CWORD_CWORD, |
| /* 249 119 "w" */ CWORD_CWORD_CWORD_CWORD, |
| /* 250 120 "x" */ CWORD_CWORD_CWORD_CWORD, |
| /* 251 121 "y" */ CWORD_CWORD_CWORD_CWORD, |
| /* 252 122 "z" */ CWORD_CWORD_CWORD_CWORD, |
| /* 253 123 "{" */ CWORD_CWORD_CWORD_CWORD, |
| /* 254 124 "|" */ CSPCL_CWORD_CWORD_CWORD, |
| /* 255 125 "}" */ CENDVAR_CENDVAR_CWORD_CENDVAR, |
| /* 256 126 "~" */ CWORD_CCTL_CCTL_CWORD, |
| /* 257 127 */ CWORD_CWORD_CWORD_CWORD, |
| }; |
| |
| #define SIT(c, syntax) (S_I_T[(int)syntax_index_table[((int)c)+SYNBASE]][syntax]) |
| |
| #endif /* USE_SIT_FUNCTION */ |
| |
| |
| /* ============ Alias handling */ |
| |
| #if ENABLE_ASH_ALIAS |
| |
| #define ALIASINUSE 1 |
| #define ALIASDEAD 2 |
| |
| struct alias { |
| struct alias *next; |
| char *name; |
| char *val; |
| int flag; |
| }; |
| |
| |
| static struct alias **atab; // [ATABSIZE]; |
| #define INIT_G_alias() do { \ |
| atab = xzalloc(ATABSIZE * sizeof(atab[0])); \ |
| } while (0) |
| |
| |
| static struct alias ** |
| __lookupalias(const char *name) { |
| unsigned int hashval; |
| struct alias **app; |
| const char *p; |
| unsigned int ch; |
| |
| p = name; |
| |
| ch = (unsigned char)*p; |
| hashval = ch << 4; |
| while (ch) { |
| hashval += ch; |
| ch = (unsigned char)*++p; |
| } |
| app = &atab[hashval % ATABSIZE]; |
| |
| for (; *app; app = &(*app)->next) { |
| if (strcmp(name, (*app)->name) == 0) { |
| break; |
| } |
| } |
| |
| return app; |
| } |
| |
| static struct alias * |
| lookupalias(const char *name, int check) |
| { |
| struct alias *ap = *__lookupalias(name); |
| |
| if (check && ap && (ap->flag & ALIASINUSE)) |
| return NULL; |
| return ap; |
| } |
| |
| static struct alias * |
| freealias(struct alias *ap) |
| { |
| struct alias *next; |
| |
| if (ap->flag & ALIASINUSE) { |
| ap->flag |= ALIASDEAD; |
| return ap; |
| } |
| |
| next = ap->next; |
| free(ap->name); |
| free(ap->val); |
| free(ap); |
| return next; |
| } |
| |
| static void |
| setalias(const char *name, const char *val) |
| { |
| struct alias *ap, **app; |
| |
| app = __lookupalias(name); |
| ap = *app; |
| INT_OFF; |
| if (ap) { |
| if (!(ap->flag & ALIASINUSE)) { |
| free(ap->val); |
| } |
| ap->val = ckstrdup(val); |
| ap->flag &= ~ALIASDEAD; |
| } else { |
| /* not found */ |
| ap = ckzalloc(sizeof(struct alias)); |
| ap->name = ckstrdup(name); |
| ap->val = ckstrdup(val); |
| /*ap->flag = 0; - ckzalloc did it */ |
| /*ap->next = NULL;*/ |
| *app = ap; |
| } |
| INT_ON; |
| } |
| |
| static int |
| unalias(const char *name) |
| { |
| struct alias **app; |
| |
| app = __lookupalias(name); |
| |
| if (*app) { |
| INT_OFF; |
| *app = freealias(*app); |
| INT_ON; |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void |
| rmaliases(void) |
| { |
| struct alias *ap, **app; |
| int i; |
| |
| INT_OFF; |
| for (i = 0; i < ATABSIZE; i++) { |
| app = &atab[i]; |
| for (ap = *app; ap; ap = *app) { |
| *app = freealias(*app); |
| if (ap == *app) { |
| app = &ap->next; |
| } |
| } |
| } |
| INT_ON; |
| } |
| |
| static void |
| printalias(const struct alias *ap) |
| { |
| out1fmt("%s=%s\n", ap->name, single_quote(ap->val)); |
| } |
| |
| /* |
| * TODO - sort output |
| */ |
| static int |
| aliascmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| char *n, *v; |
| int ret = 0; |
| struct alias *ap; |
| |
| if (!argv[1]) { |
| int i; |
| |
| for (i = 0; i < ATABSIZE; i++) { |
| for (ap = atab[i]; ap; ap = ap->next) { |
| printalias(ap); |
| } |
| } |
| return 0; |
| } |
| while ((n = *++argv) != NULL) { |
| v = strchr(n+1, '='); |
| if (v == NULL) { /* n+1: funny ksh stuff */ |
| ap = *__lookupalias(n); |
| if (ap == NULL) { |
| fprintf(stderr, "%s: %s not found\n", "alias", n); |
| ret = 1; |
| } else |
| printalias(ap); |
| } else { |
| *v++ = '\0'; |
| setalias(n, v); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int |
| unaliascmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| int i; |
| |
| while ((i = nextopt("a")) != '\0') { |
| if (i == 'a') { |
| rmaliases(); |
| return 0; |
| } |
| } |
| for (i = 0; *argptr; argptr++) { |
| if (unalias(*argptr)) { |
| fprintf(stderr, "%s: %s not found\n", "unalias", *argptr); |
| i = 1; |
| } |
| } |
| |
| return i; |
| } |
| |
| #endif /* ASH_ALIAS */ |
| |
| |
| /* ============ jobs.c */ |
| |
| /* Mode argument to forkshell. Don't change FORK_FG or FORK_BG. */ |
| #define FORK_FG 0 |
| #define FORK_BG 1 |
| #define FORK_NOJOB 2 |
| |
| /* mode flags for showjob(s) */ |
| #define SHOW_PGID 0x01 /* only show pgid - for jobs -p */ |
| #define SHOW_PID 0x04 /* include process pid */ |
| #define SHOW_CHANGED 0x08 /* only jobs whose state has changed */ |
| |
| /* |
| * A job structure contains information about a job. A job is either a |
| * single process or a set of processes contained in a pipeline. In the |
| * latter case, pidlist will be non-NULL, and will point to a -1 terminated |
| * array of pids. |
| */ |
| |
| struct procstat { |
| pid_t pid; /* process id */ |
| int status; /* last process status from wait() */ |
| char *cmd; /* text of command being run */ |
| }; |
| |
| struct job { |
| struct procstat ps0; /* status of process */ |
| struct procstat *ps; /* status or processes when more than one */ |
| #if JOBS |
| int stopstatus; /* status of a stopped job */ |
| #endif |
| uint32_t |
| nprocs: 16, /* number of processes */ |
| state: 8, |
| #define JOBRUNNING 0 /* at least one proc running */ |
| #define JOBSTOPPED 1 /* all procs are stopped */ |
| #define JOBDONE 2 /* all procs are completed */ |
| #if JOBS |
| sigint: 1, /* job was killed by SIGINT */ |
| jobctl: 1, /* job running under job control */ |
| #endif |
| waited: 1, /* true if this entry has been waited for */ |
| used: 1, /* true if this entry is in used */ |
| changed: 1; /* true if status has changed */ |
| struct job *prev_job; /* previous job */ |
| }; |
| |
| static struct job *makejob(/*union node *,*/ int); |
| #if !JOBS |
| #define forkshell(job, node, mode) forkshell(job, mode) |
| #endif |
| static int forkshell(struct job *, union node *, int); |
| static int waitforjob(struct job *); |
| |
| #if !JOBS |
| enum { doing_jobctl = 0 }; |
| #define setjobctl(on) do {} while (0) |
| #else |
| static smallint doing_jobctl; //references:8 |
| static void setjobctl(int); |
| #endif |
| |
| /* |
| * Set the signal handler for the specified signal. The routine figures |
| * out what it should be set to. |
| */ |
| static void |
| setsignal(int signo) |
| { |
| int action; |
| char *t, tsig; |
| struct sigaction act; |
| |
| t = trap[signo]; |
| action = S_IGN; |
| if (t == NULL) |
| action = S_DFL; |
| else if (*t != '\0') |
| action = S_CATCH; |
| if (rootshell && action == S_DFL) { |
| switch (signo) { |
| case SIGINT: |
| if (iflag || minusc || sflag == 0) |
| action = S_CATCH; |
| break; |
| case SIGQUIT: |
| #if DEBUG |
| if (debug) |
| break; |
| #endif |
| /* FALLTHROUGH */ |
| case SIGTERM: |
| if (iflag) |
| action = S_IGN; |
| break; |
| #if JOBS |
| case SIGTSTP: |
| case SIGTTOU: |
| if (mflag) |
| action = S_IGN; |
| break; |
| #endif |
| } |
| } |
| |
| t = &sigmode[signo - 1]; |
| tsig = *t; |
| if (tsig == 0) { |
| /* |
| * current setting unknown |
| */ |
| if (sigaction(signo, NULL, &act) == -1) { |
| /* |
| * Pretend it worked; maybe we should give a warning |
| * here, but other shells don't. We don't alter |
| * sigmode, so that we retry every time. |
| */ |
| return; |
| } |
| tsig = S_RESET; /* force to be set */ |
| if (act.sa_handler == SIG_IGN) { |
| tsig = S_HARD_IGN; |
| if (mflag |
| && (signo == SIGTSTP || signo == SIGTTIN || signo == SIGTTOU) |
| ) { |
| tsig = S_IGN; /* don't hard ignore these */ |
| } |
| } |
| } |
| if (tsig == S_HARD_IGN || tsig == action) |
| return; |
| act.sa_handler = SIG_DFL; |
| switch (action) { |
| case S_CATCH: |
| act.sa_handler = onsig; |
| break; |
| case S_IGN: |
| act.sa_handler = SIG_IGN; |
| break; |
| } |
| *t = action; |
| act.sa_flags = 0; |
| sigfillset(&act.sa_mask); |
| sigaction_set(signo, &act); |
| } |
| |
| /* mode flags for set_curjob */ |
| #define CUR_DELETE 2 |
| #define CUR_RUNNING 1 |
| #define CUR_STOPPED 0 |
| |
| /* mode flags for dowait */ |
| #define DOWAIT_NONBLOCK WNOHANG |
| #define DOWAIT_BLOCK 0 |
| |
| #if JOBS |
| /* pgrp of shell on invocation */ |
| static int initialpgrp; //references:2 |
| static int ttyfd = -1; //5 |
| #endif |
| /* array of jobs */ |
| static struct job *jobtab; //5 |
| /* size of array */ |
| static unsigned njobs; //4 |
| /* current job */ |
| static struct job *curjob; //lots |
| /* number of presumed living untracked jobs */ |
| static int jobless; //4 |
| |
| static void |
| set_curjob(struct job *jp, unsigned mode) |
| { |
| struct job *jp1; |
| struct job **jpp, **curp; |
| |
| /* first remove from list */ |
| jpp = curp = &curjob; |
| do { |
| jp1 = *jpp; |
| if (jp1 == jp) |
| break; |
| jpp = &jp1->prev_job; |
| } while (1); |
| *jpp = jp1->prev_job; |
| |
| /* Then re-insert in correct position */ |
| jpp = curp; |
| switch (mode) { |
| default: |
| #if DEBUG |
| abort(); |
| #endif |
| case CUR_DELETE: |
| /* job being deleted */ |
| break; |
| case CUR_RUNNING: |
| /* newly created job or backgrounded job, |
| put after all stopped jobs. */ |
| do { |
| jp1 = *jpp; |
| #if JOBS |
| if (!jp1 || jp1->state != JOBSTOPPED) |
| #endif |
| break; |
| jpp = &jp1->prev_job; |
| } while (1); |
| /* FALLTHROUGH */ |
| #if JOBS |
| case CUR_STOPPED: |
| #endif |
| /* newly stopped job - becomes curjob */ |
| jp->prev_job = *jpp; |
| *jpp = jp; |
| break; |
| } |
| } |
| |
| #if JOBS || DEBUG |
| static int |
| jobno(const struct job *jp) |
| { |
| return jp - jobtab + 1; |
| } |
| #endif |
| |
| /* |
| * Convert a job name to a job structure. |
| */ |
| #if !JOBS |
| #define getjob(name, getctl) getjob(name) |
| #endif |
| static struct job * |
| getjob(const char *name, int getctl) |
| { |
| struct job *jp; |
| struct job *found; |
| const char *err_msg = "No such job: %s"; |
| unsigned num; |
| int c; |
| const char *p; |
| char *(*match)(const char *, const char *); |
| |
| jp = curjob; |
| p = name; |
| if (!p) |
| goto currentjob; |
| |
| if (*p != '%') |
| goto err; |
| |
| c = *++p; |
| if (!c) |
| goto currentjob; |
| |
| if (!p[1]) { |
| if (c == '+' || c == '%') { |
| currentjob: |
| err_msg = "No current job"; |
| goto check; |
| } |
| if (c == '-') { |
| if (jp) |
| jp = jp->prev_job; |
| err_msg = "No previous job"; |
| check: |
| if (!jp) |
| goto err; |
| goto gotit; |
| } |
| } |
| |
| if (is_number(p)) { |
| // TODO: number() instead? It does error checking... |
| num = atoi(p); |
| if (num < njobs) { |
| jp = jobtab + num - 1; |
| if (jp->used) |
| goto gotit; |
| goto err; |
| } |
| } |
| |
| match = prefix; |
| if (*p == '?') { |
| match = strstr; |
| p++; |
| } |
| |
| found = 0; |
| while (1) { |
| if (!jp) |
| goto err; |
| if (match(jp->ps[0].cmd, p)) { |
| if (found) |
| goto err; |
| found = jp; |
| err_msg = "%s: ambiguous"; |
| } |
| jp = jp->prev_job; |
| } |
| |
| gotit: |
| #if JOBS |
| err_msg = "job %s not created under job control"; |
| if (getctl && jp->jobctl == 0) |
| goto err; |
| #endif |
| return jp; |
| err: |
| ash_msg_and_raise_error(err_msg, name); |
| } |
| |
| /* |
| * Mark a job structure as unused. |
| */ |
| static void |
| freejob(struct job *jp) |
| { |
| struct procstat *ps; |
| int i; |
| |
| INT_OFF; |
| for (i = jp->nprocs, ps = jp->ps; --i >= 0; ps++) { |
| if (ps->cmd != nullstr) |
| free(ps->cmd); |
| } |
| if (jp->ps != &jp->ps0) |
| free(jp->ps); |
| jp->used = 0; |
| set_curjob(jp, CUR_DELETE); |
| INT_ON; |
| } |
| |
| #if JOBS |
| static void |
| xtcsetpgrp(int fd, pid_t pgrp) |
| { |
| if (tcsetpgrp(fd, pgrp)) |
| ash_msg_and_raise_error("cannot set tty process group (%m)"); |
| } |
| |
| /* |
| * Turn job control on and off. |
| * |
| * Note: This code assumes that the third arg to ioctl is a character |
| * pointer, which is true on Berkeley systems but not System V. Since |
| * System V doesn't have job control yet, this isn't a problem now. |
| * |
| * Called with interrupts off. |
| */ |
| static void |
| setjobctl(int on) |
| { |
| int fd; |
| int pgrp; |
| |
| if (on == doing_jobctl || rootshell == 0) |
| return; |
| if (on) { |
| int ofd; |
| ofd = fd = open(_PATH_TTY, O_RDWR); |
| if (fd < 0) { |
| /* BTW, bash will try to open(ttyname(0)) if open("/dev/tty") fails. |
| * That sometimes helps to acquire controlling tty. |
| * Obviously, a workaround for bugs when someone |
| * failed to provide a controlling tty to bash! :) */ |
| fd = 2; |
| while (!isatty(fd)) |
| if (--fd < 0) |
| goto out; |
| } |
| fd = fcntl(fd, F_DUPFD, 10); |
| if (ofd >= 0) |
| close(ofd); |
| if (fd < 0) |
| goto out; |
| /* fd is a tty at this point */ |
| close_on_exec_on(fd); |
| do { /* while we are in the background */ |
| pgrp = tcgetpgrp(fd); |
| if (pgrp < 0) { |
| out: |
| ash_msg("can't access tty; job control turned off"); |
| mflag = on = 0; |
| goto close; |
| } |
| if (pgrp == getpgrp()) |
| break; |
| killpg(0, SIGTTIN); |
| } while (1); |
| initialpgrp = pgrp; |
| |
| setsignal(SIGTSTP); |
| setsignal(SIGTTOU); |
| setsignal(SIGTTIN); |
| pgrp = rootpid; |
| setpgid(0, pgrp); |
| xtcsetpgrp(fd, pgrp); |
| } else { |
| /* turning job control off */ |
| fd = ttyfd; |
| pgrp = initialpgrp; |
| /* was xtcsetpgrp, but this can make exiting ash |
| * loop forever if pty is already deleted */ |
| tcsetpgrp(fd, pgrp); |
| setpgid(0, pgrp); |
| setsignal(SIGTSTP); |
| setsignal(SIGTTOU); |
| setsignal(SIGTTIN); |
| close: |
| if (fd >= 0) |
| close(fd); |
| fd = -1; |
| } |
| ttyfd = fd; |
| doing_jobctl = on; |
| } |
| |
| static int |
| killcmd(int argc, char **argv) |
| { |
| int i = 1; |
| if (argv[1] && strcmp(argv[1], "-l") != 0) { |
| do { |
| if (argv[i][0] == '%') { |
| struct job *jp = getjob(argv[i], 0); |
| unsigned pid = jp->ps[0].pid; |
| /* Enough space for ' -NNN<nul>' */ |
| argv[i] = alloca(sizeof(int)*3 + 3); |
| /* kill_main has matching code to expect |
| * leading space. Needed to not confuse |
| * negative pids with "kill -SIGNAL_NO" syntax */ |
| sprintf(argv[i], " -%u", pid); |
| } |
| } while (argv[++i]); |
| } |
| return kill_main(argc, argv); |
| } |
| |
| static void |
| showpipe(struct job *jp, FILE *out) |
| { |
| struct procstat *sp; |
| struct procstat *spend; |
| |
| spend = jp->ps + jp->nprocs; |
| for (sp = jp->ps + 1; sp < spend; sp++) |
| fprintf(out, " | %s", sp->cmd); |
| outcslow('\n', out); |
| flush_stdout_stderr(); |
| } |
| |
| |
| static int |
| restartjob(struct job *jp, int mode) |
| { |
| struct procstat *ps; |
| int i; |
| int status; |
| pid_t pgid; |
| |
| INT_OFF; |
| if (jp->state == JOBDONE) |
| goto out; |
| jp->state = JOBRUNNING; |
| pgid = jp->ps->pid; |
| if (mode == FORK_FG) |
| xtcsetpgrp(ttyfd, pgid); |
| killpg(pgid, SIGCONT); |
| ps = jp->ps; |
| i = jp->nprocs; |
| do { |
| if (WIFSTOPPED(ps->status)) { |
| ps->status = -1; |
| } |
| ps++; |
| } while (--i); |
| out: |
| status = (mode == FORK_FG) ? waitforjob(jp) : 0; |
| INT_ON; |
| return status; |
| } |
| |
| static int |
| fg_bgcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| struct job *jp; |
| FILE *out; |
| int mode; |
| int retval; |
| |
| mode = (**argv == 'f') ? FORK_FG : FORK_BG; |
| nextopt(nullstr); |
| argv = argptr; |
| out = stdout; |
| do { |
| jp = getjob(*argv, 1); |
| if (mode == FORK_BG) { |
| set_curjob(jp, CUR_RUNNING); |
| fprintf(out, "[%d] ", jobno(jp)); |
| } |
| outstr(jp->ps->cmd, out); |
| showpipe(jp, out); |
| retval = restartjob(jp, mode); |
| } while (*argv && *++argv); |
| return retval; |
| } |
| #endif |
| |
| static int |
| sprint_status(char *s, int status, int sigonly) |
| { |
| int col; |
| int st; |
| |
| col = 0; |
| if (!WIFEXITED(status)) { |
| #if JOBS |
| if (WIFSTOPPED(status)) |
| st = WSTOPSIG(status); |
| else |
| #endif |
| st = WTERMSIG(status); |
| if (sigonly) { |
| if (st == SIGINT || st == SIGPIPE) |
| goto out; |
| #if JOBS |
| if (WIFSTOPPED(status)) |
| goto out; |
| #endif |
| } |
| st &= 0x7f; |
| col = fmtstr(s, 32, strsignal(st)); |
| if (WCOREDUMP(status)) { |
| col += fmtstr(s + col, 16, " (core dumped)"); |
| } |
| } else if (!sigonly) { |
| st = WEXITSTATUS(status); |
| if (st) |
| col = fmtstr(s, 16, "Done(%d)", st); |
| else |
| col = fmtstr(s, 16, "Done"); |
| } |
| out: |
| return col; |
| } |
| |
| /* |
| * Do a wait system call. If job control is compiled in, we accept |
| * stopped processes. If block is zero, we return a value of zero |
| * rather than blocking. |
| * |
| * System V doesn't have a non-blocking wait system call. It does |
| * have a SIGCLD signal that is sent to a process when one of it's |
| * children dies. The obvious way to use SIGCLD would be to install |
| * a handler for SIGCLD which simply bumped a counter when a SIGCLD |
| * was received, and have waitproc bump another counter when it got |
| * the status of a process. Waitproc would then know that a wait |
| * system call would not block if the two counters were different. |
| * This approach doesn't work because if a process has children that |
| * have not been waited for, System V will send it a SIGCLD when it |
| * installs a signal handler for SIGCLD. What this means is that when |
| * a child exits, the shell will be sent SIGCLD signals continuously |
| * until is runs out of stack space, unless it does a wait call before |
| * restoring the signal handler. The code below takes advantage of |
| * this (mis)feature by installing a signal handler for SIGCLD and |
| * then checking to see whether it was called. If there are any |
| * children to be waited for, it will be. |
| * |
| * If neither SYSV nor BSD is defined, we don't implement nonblocking |
| * waits at all. In this case, the user will not be informed when |
| * a background process until the next time she runs a real program |
| * (as opposed to running a builtin command or just typing return), |
| * and the jobs command may give out of date information. |
| */ |
| static int |
| waitproc(int wait_flags, int *status) |
| { |
| #if JOBS |
| if (doing_jobctl) |
| wait_flags |= WUNTRACED; |
| #endif |
| /* NB: _not_ safe_waitpid, we need to detect EINTR */ |
| return waitpid(-1, status, wait_flags); |
| } |
| |
| /* |
| * Wait for a process to terminate. |
| */ |
| static int |
| dowait(int wait_flags, struct job *job) |
| { |
| int pid; |
| int status; |
| struct job *jp; |
| struct job *thisjob; |
| int state; |
| |
| TRACE(("dowait(%d) called\n", wait_flags)); |
| pid = waitproc(wait_flags, &status); |
| TRACE(("wait returns pid=%d, status=%d\n", pid, status)); |
| if (pid <= 0) { |
| /* If we were doing blocking wait and (probably) got EINTR, |
| * check for pending sigs received while waiting. |
| * (NB: can be moved into callers if needed) */ |
| if (wait_flags == DOWAIT_BLOCK && pendingsig) |
| raise_exception(EXSIG); |
| return pid; |
| } |
| INT_OFF; |
| thisjob = NULL; |
| for (jp = curjob; jp; jp = jp->prev_job) { |
| struct procstat *sp; |
| struct procstat *spend; |
| if (jp->state == JOBDONE) |
| continue; |
| state = JOBDONE; |
| spend = jp->ps + jp->nprocs; |
| sp = jp->ps; |
| do { |
| if (sp->pid == pid) { |
| TRACE(("Job %d: changing status of proc %d " |
| "from 0x%x to 0x%x\n", |
| jobno(jp), pid, sp->status, status)); |
| sp->status = status; |
| thisjob = jp; |
| } |
| if (sp->status == -1) |
| state = JOBRUNNING; |
| #if JOBS |
| if (state == JOBRUNNING) |
| continue; |
| if (WIFSTOPPED(sp->status)) { |
| jp->stopstatus = sp->status; |
| state = JOBSTOPPED; |
| } |
| #endif |
| } while (++sp < spend); |
| if (thisjob) |
| goto gotjob; |
| } |
| #if JOBS |
| if (!WIFSTOPPED(status)) |
| #endif |
| jobless--; |
| goto out; |
| |
| gotjob: |
| if (state != JOBRUNNING) { |
| thisjob->changed = 1; |
| |
| if (thisjob->state != state) { |
| TRACE(("Job %d: changing state from %d to %d\n", |
| jobno(thisjob), thisjob->state, state)); |
| thisjob->state = state; |
| #if JOBS |
| if (state == JOBSTOPPED) { |
| set_curjob(thisjob, CUR_STOPPED); |
| } |
| #endif |
| } |
| } |
| |
| out: |
| INT_ON; |
| |
| if (thisjob && thisjob == job) { |
| char s[48 + 1]; |
| int len; |
| |
| len = sprint_status(s, status, 1); |
| if (len) { |
| s[len] = '\n'; |
| s[len + 1] = '\0'; |
| out2str(s); |
| } |
| } |
| return pid; |
| } |
| |
| #if JOBS |
| static void |
| showjob(FILE *out, struct job *jp, int mode) |
| { |
| struct procstat *ps; |
| struct procstat *psend; |
| int col; |
| int indent_col; |
| char s[80]; |
| |
| ps = jp->ps; |
| |
| if (mode & SHOW_PGID) { |
| /* just output process (group) id of pipeline */ |
| fprintf(out, "%d\n", ps->pid); |
| return; |
| } |
| |
| col = fmtstr(s, 16, "[%d] ", jobno(jp)); |
| indent_col = col; |
| |
| if (jp == curjob) |
| s[col - 2] = '+'; |
| else if (curjob && jp == curjob->prev_job) |
| s[col - 2] = '-'; |
| |
| if (mode & SHOW_PID) |
| col += fmtstr(s + col, 16, "%d ", ps->pid); |
| |
| psend = ps + jp->nprocs; |
| |
| if (jp->state == JOBRUNNING) { |
| strcpy(s + col, "Running"); |
| col += sizeof("Running") - 1; |
| } else { |
| int status = psend[-1].status; |
| if (jp->state == JOBSTOPPED) |
| status = jp->stopstatus; |
| col += sprint_status(s + col, status, 0); |
| } |
| |
| goto start; |
| |
| do { |
| /* for each process */ |
| col = fmtstr(s, 48, " |\n%*c%d ", indent_col, ' ', ps->pid) - 3; |
| start: |
| fprintf(out, "%s%*c%s", |
| s, 33 - col >= 0 ? 33 - col : 0, ' ', ps->cmd |
| ); |
| if (!(mode & SHOW_PID)) { |
| showpipe(jp, out); |
| break; |
| } |
| if (++ps == psend) { |
| outcslow('\n', out); |
| break; |
| } |
| } while (1); |
| |
| jp->changed = 0; |
| |
| if (jp->state == JOBDONE) { |
| TRACE(("showjob: freeing job %d\n", jobno(jp))); |
| freejob(jp); |
| } |
| } |
| |
| /* |
| * Print a list of jobs. If "change" is nonzero, only print jobs whose |
| * statuses have changed since the last call to showjobs. |
| */ |
| static void |
| showjobs(FILE *out, int mode) |
| { |
| struct job *jp; |
| |
| TRACE(("showjobs(%x) called\n", mode)); |
| |
| /* If not even one job changed, there is nothing to do */ |
| while (dowait(DOWAIT_NONBLOCK, NULL) > 0) |
| continue; |
| |
| for (jp = curjob; jp; jp = jp->prev_job) { |
| if (!(mode & SHOW_CHANGED) || jp->changed) { |
| showjob(out, jp, mode); |
| } |
| } |
| } |
| |
| static int |
| jobscmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| int mode, m; |
| |
| mode = 0; |
| while ((m = nextopt("lp"))) { |
| if (m == 'l') |
| mode = SHOW_PID; |
| else |
| mode = SHOW_PGID; |
| } |
| |
| argv = argptr; |
| if (*argv) { |
| do |
| showjob(stdout, getjob(*argv,0), mode); |
| while (*++argv); |
| } else |
| showjobs(stdout, mode); |
| |
| return 0; |
| } |
| #endif /* JOBS */ |
| |
| static int |
| getstatus(struct job *job) |
| { |
| int status; |
| int retval; |
| |
| status = job->ps[job->nprocs - 1].status; |
| retval = WEXITSTATUS(status); |
| if (!WIFEXITED(status)) { |
| #if JOBS |
| retval = WSTOPSIG(status); |
| if (!WIFSTOPPED(status)) |
| #endif |
| { |
| /* XXX: limits number of signals */ |
| retval = WTERMSIG(status); |
| #if JOBS |
| if (retval == SIGINT) |
| job->sigint = 1; |
| #endif |
| } |
| retval += 128; |
| } |
| TRACE(("getstatus: job %d, nproc %d, status %x, retval %x\n", |
| jobno(job), job->nprocs, status, retval)); |
| return retval; |
| } |
| |
| static int |
| waitcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| struct job *job; |
| int retval; |
| struct job *jp; |
| |
| // exsig++; |
| // xbarrier(); |
| if (pendingsig) |
| raise_exception(EXSIG); |
| |
| nextopt(nullstr); |
| retval = 0; |
| |
| argv = argptr; |
| if (!*argv) { |
| /* wait for all jobs */ |
| for (;;) { |
| jp = curjob; |
| while (1) { |
| if (!jp) /* no running procs */ |
| goto ret; |
| if (jp->state == JOBRUNNING) |
| break; |
| jp->waited = 1; |
| jp = jp->prev_job; |
| } |
| dowait(DOWAIT_BLOCK, NULL); |
| } |
| } |
| |
| retval = 127; |
| do { |
| if (**argv != '%') { |
| pid_t pid = number(*argv); |
| job = curjob; |
| while (1) { |
| if (!job) |
| goto repeat; |
| if (job->ps[job->nprocs - 1].pid == pid) |
| break; |
| job = job->prev_job; |
| } |
| } else |
| job = getjob(*argv, 0); |
| /* loop until process terminated or stopped */ |
| while (job->state == JOBRUNNING) |
| dowait(DOWAIT_BLOCK, NULL); |
| job->waited = 1; |
| retval = getstatus(job); |
| repeat: |
| ; |
| } while (*++argv); |
| |
| ret: |
| return retval; |
| } |
| |
| static struct job * |
| growjobtab(void) |
| { |
| size_t len; |
| ptrdiff_t offset; |
| struct job *jp, *jq; |
| |
| len = njobs * sizeof(*jp); |
| jq = jobtab; |
| jp = ckrealloc(jq, len + 4 * sizeof(*jp)); |
| |
| offset = (char *)jp - (char *)jq; |
| if (offset) { |
| /* Relocate pointers */ |
| size_t l = len; |
| |
| jq = (struct job *)((char *)jq + l); |
| while (l) { |
| l -= sizeof(*jp); |
| jq--; |
| #define joff(p) ((struct job *)((char *)(p) + l)) |
| #define jmove(p) (p) = (void *)((char *)(p) + offset) |
| if (joff(jp)->ps == &jq->ps0) |
| jmove(joff(jp)->ps); |
| if (joff(jp)->prev_job) |
| jmove(joff(jp)->prev_job); |
| } |
| if (curjob) |
| jmove(curjob); |
| #undef joff |
| #undef jmove |
| } |
| |
| njobs += 4; |
| jobtab = jp; |
| jp = (struct job *)((char *)jp + len); |
| jq = jp + 3; |
| do { |
| jq->used = 0; |
| } while (--jq >= jp); |
| return jp; |
| } |
| |
| /* |
| * Return a new job structure. |
| * Called with interrupts off. |
| */ |
| static struct job * |
| makejob(/*union node *node,*/ int nprocs) |
| { |
| int i; |
| struct job *jp; |
| |
| for (i = njobs, jp = jobtab; ; jp++) { |
| if (--i < 0) { |
| jp = growjobtab(); |
| break; |
| } |
| if (jp->used == 0) |
| break; |
| if (jp->state != JOBDONE || !jp->waited) |
| continue; |
| #if JOBS |
| if (doing_jobctl) |
| continue; |
| #endif |
| freejob(jp); |
| break; |
| } |
| memset(jp, 0, sizeof(*jp)); |
| #if JOBS |
| /* jp->jobctl is a bitfield. |
| * "jp->jobctl |= jobctl" likely to give awful code */ |
| if (doing_jobctl) |
| jp->jobctl = 1; |
| #endif |
| jp->prev_job = curjob; |
| curjob = jp; |
| jp->used = 1; |
| jp->ps = &jp->ps0; |
| if (nprocs > 1) { |
| jp->ps = ckmalloc(nprocs * sizeof(struct procstat)); |
| } |
| TRACE(("makejob(%d) returns %%%d\n", nprocs, |
| jobno(jp))); |
| return jp; |
| } |
| |
| #if JOBS |
| /* |
| * Return a string identifying a command (to be printed by the |
| * jobs command). |
| */ |
| static char *cmdnextc; |
| |
| static void |
| cmdputs(const char *s) |
| { |
| static const char vstype[VSTYPE + 1][3] = { |
| "", "}", "-", "+", "?", "=", |
| "%", "%%", "#", "##" |
| USE_ASH_BASH_COMPAT(, ":", "/", "//") |
| }; |
| |
| const char *p, *str; |
| char c, cc[2] = " "; |
| char *nextc; |
| int subtype = 0; |
| int quoted = 0; |
| |
| nextc = makestrspace((strlen(s) + 1) * 8, cmdnextc); |
| p = s; |
| while ((c = *p++) != 0) { |
| str = NULL; |
| switch (c) { |
| case CTLESC: |
| c = *p++; |
| break; |
| case CTLVAR: |
| subtype = *p++; |
| if ((subtype & VSTYPE) == VSLENGTH) |
| str = "${#"; |
| else |
| str = "${"; |
| if (!(subtype & VSQUOTE) == !(quoted & 1)) |
| goto dostr; |
| quoted ^= 1; |
| c = '"'; |
| break; |
| case CTLENDVAR: |
| str = "\"}" + !(quoted & 1); |
| quoted >>= 1; |
| subtype = 0; |
| goto dostr; |
| case CTLBACKQ: |
| str = "$(...)"; |
| goto dostr; |
| case CTLBACKQ+CTLQUOTE: |
| str = "\"$(...)\""; |
| goto dostr; |
| #if ENABLE_ASH_MATH_SUPPORT |
| case CTLARI: |
| str = "$(("; |
| goto dostr; |
| case CTLENDARI: |
| str = "))"; |
| goto dostr; |
| #endif |
| case CTLQUOTEMARK: |
| quoted ^= 1; |
| c = '"'; |
| break; |
| case '=': |
| if (subtype == 0) |
| break; |
| if ((subtype & VSTYPE) != VSNORMAL) |
| quoted <<= 1; |
| str = vstype[subtype & VSTYPE]; |
| if (subtype & VSNUL) |
| c = ':'; |
| else |
| goto checkstr; |
| break; |
| case '\'': |
| case '\\': |
| case '"': |
| case '$': |
| /* These can only happen inside quotes */ |
| cc[0] = c; |
| str = cc; |
| c = '\\'; |
| break; |
| default: |
| break; |
| } |
| USTPUTC(c, nextc); |
| checkstr: |
| if (!str) |
| continue; |
| dostr: |
| while ((c = *str++)) { |
| USTPUTC(c, nextc); |
| } |
| } |
| if (quoted & 1) { |
| USTPUTC('"', nextc); |
| } |
| *nextc = 0; |
| cmdnextc = nextc; |
| } |
| |
| /* cmdtxt() and cmdlist() call each other */ |
| static void cmdtxt(union node *n); |
| |
| static void |
| cmdlist(union node *np, int sep) |
| { |
| for (; np; np = np->narg.next) { |
| if (!sep) |
| cmdputs(" "); |
| cmdtxt(np); |
| if (sep && np->narg.next) |
| cmdputs(" "); |
| } |
| } |
| |
| static void |
| cmdtxt(union node *n) |
| { |
| union node *np; |
| struct nodelist *lp; |
| const char *p; |
| char s[2]; |
| |
| if (!n) |
| return; |
| switch (n->type) { |
| default: |
| #if DEBUG |
| abort(); |
| #endif |
| case NPIPE: |
| lp = n->npipe.cmdlist; |
| for (;;) { |
| cmdtxt(lp->n); |
| lp = lp->next; |
| if (!lp) |
| break; |
| cmdputs(" | "); |
| } |
| break; |
| case NSEMI: |
| p = "; "; |
| goto binop; |
| case NAND: |
| p = " && "; |
| goto binop; |
| case NOR: |
| p = " || "; |
| binop: |
| cmdtxt(n->nbinary.ch1); |
| cmdputs(p); |
| n = n->nbinary.ch2; |
| goto donode; |
| case NREDIR: |
| case NBACKGND: |
| n = n->nredir.n; |
| goto donode; |
| case NNOT: |
| cmdputs("!"); |
| n = n->nnot.com; |
| donode: |
| cmdtxt(n); |
| break; |
| case NIF: |
| cmdputs("if "); |
| cmdtxt(n->nif.test); |
| cmdputs("; then "); |
| n = n->nif.ifpart; |
| if (n->nif.elsepart) { |
| cmdtxt(n); |
| cmdputs("; else "); |
| n = n->nif.elsepart; |
| } |
| p = "; fi"; |
| goto dotail; |
| case NSUBSHELL: |
| cmdputs("("); |
| n = n->nredir.n; |
| p = ")"; |
| goto dotail; |
| case NWHILE: |
| p = "while "; |
| goto until; |
| case NUNTIL: |
| p = "until "; |
| until: |
| cmdputs(p); |
| cmdtxt(n->nbinary.ch1); |
| n = n->nbinary.ch2; |
| p = "; done"; |
| dodo: |
| cmdputs("; do "); |
| dotail: |
| cmdtxt(n); |
| goto dotail2; |
| case NFOR: |
| cmdputs("for "); |
| cmdputs(n->nfor.var); |
| cmdputs(" in "); |
| cmdlist(n->nfor.args, 1); |
| n = n->nfor.body; |
| p = "; done"; |
| goto dodo; |
| case NDEFUN: |
| cmdputs(n->narg.text); |
| p = "() { ... }"; |
| goto dotail2; |
| case NCMD: |
| cmdlist(n->ncmd.args, 1); |
| cmdlist(n->ncmd.redirect, 0); |
| break; |
| case NARG: |
| p = n->narg.text; |
| dotail2: |
| cmdputs(p); |
| break; |
| case NHERE: |
| case NXHERE: |
| p = "<<..."; |
| goto dotail2; |
| case NCASE: |
| cmdputs("case "); |
| cmdputs(n->ncase.expr->narg.text); |
| cmdputs(" in "); |
| for (np = n->ncase.cases; np; np = np->nclist.next) { |
| cmdtxt(np->nclist.pattern); |
| cmdputs(") "); |
| cmdtxt(np->nclist.body); |
| cmdputs(";; "); |
| } |
| p = "esac"; |
| goto dotail2; |
| case NTO: |
| p = ">"; |
| goto redir; |
| case NCLOBBER: |
| p = ">|"; |
| goto redir; |
| case NAPPEND: |
| p = ">>"; |
| goto redir; |
| case NTOFD: |
| p = ">&"; |
| goto redir; |
| case NFROM: |
| p = "<"; |
| goto redir; |
| case NFROMFD: |
| p = "<&"; |
| goto redir; |
| case NFROMTO: |
| p = "<>"; |
| redir: |
| s[0] = n->nfile.fd + '0'; |
| s[1] = '\0'; |
| cmdputs(s); |
| cmdputs(p); |
| if (n->type == NTOFD || n->type == NFROMFD) { |
| s[0] = n->ndup.dupfd + '0'; |
| p = s; |
| goto dotail2; |
| } |
| n = n->nfile.fname; |
| goto donode; |
| } |
| } |
| |
| static char * |
| commandtext(union node *n) |
| { |
| char *name; |
| |
| STARTSTACKSTR(cmdnextc); |
| cmdtxt(n); |
| name = stackblock(); |
| TRACE(("commandtext: name %p, end %p\n\t\"%s\"\n", |
| name, cmdnextc, cmdnextc)); |
| return ckstrdup(name); |
| } |
| #endif /* JOBS */ |
| |
| /* |
| * Fork off a subshell. If we are doing job control, give the subshell its |
| * own process group. Jp is a job structure that the job is to be added to. |
| * N is the command that will be evaluated by the child. Both jp and n may |
| * be NULL. The mode parameter can be one of the following: |
| * FORK_FG - Fork off a foreground process. |
| * FORK_BG - Fork off a background process. |
| * FORK_NOJOB - Like FORK_FG, but don't give the process its own |
| * process group even if job control is on. |
| * |
| * When job control is turned off, background processes have their standard |
| * input redirected to /dev/null (except for the second and later processes |
| * in a pipeline). |
| * |
| * Called with interrupts off. |
| */ |
| /* |
| * Clear traps on a fork. |
| */ |
| static void |
| clear_traps(void) |
| { |
| char **tp; |
| |
| for (tp = trap; tp < &trap[NSIG]; tp++) { |
| if (*tp && **tp) { /* trap not NULL or "" (SIG_IGN) */ |
| INT_OFF; |
| free(*tp); |
| *tp = NULL; |
| if (tp != &trap[0]) |
| setsignal(tp - trap); |
| INT_ON; |
| } |
| } |
| } |
| |
| /* Lives far away from here, needed for forkchild */ |
| static void closescript(void); |
| |
| /* Called after fork(), in child */ |
| static void |
| forkchild(struct job *jp, /*union node *n,*/ int mode) |
| { |
| int oldlvl; |
| |
| TRACE(("Child shell %d\n", getpid())); |
| oldlvl = shlvl; |
| shlvl++; |
| |
| closescript(); |
| clear_traps(); |
| #if JOBS |
| /* do job control only in root shell */ |
| doing_jobctl = 0; |
| if (mode != FORK_NOJOB && jp->jobctl && !oldlvl) { |
| pid_t pgrp; |
| |
| if (jp->nprocs == 0) |
| pgrp = getpid(); |
| else |
| pgrp = jp->ps[0].pid; |
| /* This can fail because we are doing it in the parent also */ |
| (void)setpgid(0, pgrp); |
| if (mode == FORK_FG) |
| xtcsetpgrp(ttyfd, pgrp); |
| setsignal(SIGTSTP); |
| setsignal(SIGTTOU); |
| } else |
| #endif |
| if (mode == FORK_BG) { |
| ignoresig(SIGINT); |
| ignoresig(SIGQUIT); |
| if (jp->nprocs == 0) { |
| close(0); |
| if (open(bb_dev_null, O_RDONLY) != 0) |
| ash_msg_and_raise_error("can't open %s", bb_dev_null); |
| } |
| } |
| if (!oldlvl && iflag) { |
| setsignal(SIGINT); |
| setsignal(SIGQUIT); |
| setsignal(SIGTERM); |
| } |
| for (jp = curjob; jp; jp = jp->prev_job) |
| freejob(jp); |
| jobless = 0; |
| } |
| |
| /* Called after fork(), in parent */ |
| #if !JOBS |
| #define forkparent(jp, n, mode, pid) forkparent(jp, mode, pid) |
| #endif |
| static void |
| forkparent(struct job *jp, union node *n, int mode, pid_t pid) |
| { |
| TRACE(("In parent shell: child = %d\n", pid)); |
| if (!jp) { |
| while (jobless && dowait(DOWAIT_NONBLOCK, NULL) > 0) |
| continue; |
| jobless++; |
| return; |
| } |
| #if JOBS |
| if (mode != FORK_NOJOB && jp->jobctl) { |
| int pgrp; |
| |
| if (jp->nprocs == 0) |
| pgrp = pid; |
| else |
| pgrp = jp->ps[0].pid; |
| /* This can fail because we are doing it in the child also */ |
| setpgid(pid, pgrp); |
| } |
| #endif |
| if (mode == FORK_BG) { |
| backgndpid = pid; /* set $! */ |
| set_curjob(jp, CUR_RUNNING); |
| } |
| if (jp) { |
| struct procstat *ps = &jp->ps[jp->nprocs++]; |
| ps->pid = pid; |
| ps->status = -1; |
| ps->cmd = nullstr; |
| #if JOBS |
| if (doing_jobctl && n) |
| ps->cmd = commandtext(n); |
| #endif |
| } |
| } |
| |
| static int |
| forkshell(struct job *jp, union node *n, int mode) |
| { |
| int pid; |
| |
| TRACE(("forkshell(%%%d, %p, %d) called\n", jobno(jp), n, mode)); |
| pid = fork(); |
| if (pid < 0) { |
| TRACE(("Fork failed, errno=%d", errno)); |
| if (jp) |
| freejob(jp); |
| ash_msg_and_raise_error("cannot fork"); |
| } |
| if (pid == 0) |
| forkchild(jp, /*n,*/ mode); |
| else |
| forkparent(jp, n, mode, pid); |
| return pid; |
| } |
| |
| /* |
| * Wait for job to finish. |
| * |
| * Under job control we have the problem that while a child process is |
| * running interrupts generated by the user are sent to the child but not |
| * to the shell. This means that an infinite loop started by an inter- |
| * active user may be hard to kill. With job control turned off, an |
| * interactive user may place an interactive program inside a loop. If |
| * the interactive program catches interrupts, the user doesn't want |
| * these interrupts to also abort the loop. The approach we take here |
| * is to have the shell ignore interrupt signals while waiting for a |
| * foreground process to terminate, and then send itself an interrupt |
| * signal if the child process was terminated by an interrupt signal. |
| * Unfortunately, some programs want to do a bit of cleanup and then |
| * exit on interrupt; unless these processes terminate themselves by |
| * sending a signal to themselves (instead of calling exit) they will |
| * confuse this approach. |
| * |
| * Called with interrupts off. |
| */ |
| static int |
| waitforjob(struct job *jp) |
| { |
| int st; |
| |
| TRACE(("waitforjob(%%%d) called\n", jobno(jp))); |
| while (jp->state == JOBRUNNING) { |
| dowait(DOWAIT_BLOCK, jp); |
| } |
| st = getstatus(jp); |
| #if JOBS |
| if (jp->jobctl) { |
| xtcsetpgrp(ttyfd, rootpid); |
| /* |
| * This is truly gross. |
| * If we're doing job control, then we did a TIOCSPGRP which |
| * caused us (the shell) to no longer be in the controlling |
| * session -- so we wouldn't have seen any ^C/SIGINT. So, we |
| * intuit from the subprocess exit status whether a SIGINT |
| * occurred, and if so interrupt ourselves. Yuck. - mycroft |
| */ |
| if (jp->sigint) /* TODO: do the same with all signals */ |
| raise(SIGINT); /* ... by raise(jp->sig) instead? */ |
| } |
| if (jp->state == JOBDONE) |
| #endif |
| freejob(jp); |
| return st; |
| } |
| |
| /* |
| * return 1 if there are stopped jobs, otherwise 0 |
| */ |
| static int |
| stoppedjobs(void) |
| { |
| struct job *jp; |
| int retval; |
| |
| retval = 0; |
| if (job_warning) |
| goto out; |
| jp = curjob; |
| if (jp && jp->state == JOBSTOPPED) { |
| out2str("You have stopped jobs.\n"); |
| job_warning = 2; |
| retval++; |
| } |
| out: |
| return retval; |
| } |
| |
| |
| /* ============ redir.c |
| * |
| * Code for dealing with input/output redirection. |
| */ |
| |
| #define EMPTY -2 /* marks an unused slot in redirtab */ |
| #define CLOSED -3 /* marks a slot of previously-closed fd */ |
| #ifndef PIPE_BUF |
| # define PIPESIZE 4096 /* amount of buffering in a pipe */ |
| #else |
| # define PIPESIZE PIPE_BUF |
| #endif |
| |
| /* |
| * Open a file in noclobber mode. |
| * The code was copied from bash. |
| */ |
| static int |
| noclobberopen(const char *fname) |
| { |
| int r, fd; |
| struct stat finfo, finfo2; |
| |
| /* |
| * If the file exists and is a regular file, return an error |
| * immediately. |
| */ |
| r = stat(fname, &finfo); |
| if (r == 0 && S_ISREG(finfo.st_mode)) { |
| errno = EEXIST; |
| return -1; |
| } |
| |
| /* |
| * If the file was not present (r != 0), make sure we open it |
| * exclusively so that if it is created before we open it, our open |
| * will fail. Make sure that we do not truncate an existing file. |
| * Note that we don't turn on O_EXCL unless the stat failed -- if the |
| * file was not a regular file, we leave O_EXCL off. |
| */ |
| if (r != 0) |
| return open(fname, O_WRONLY|O_CREAT|O_EXCL, 0666); |
| fd = open(fname, O_WRONLY|O_CREAT, 0666); |
| |
| /* If the open failed, return the file descriptor right away. */ |
| if (fd < 0) |
| return fd; |
| |
| /* |
| * OK, the open succeeded, but the file may have been changed from a |
| * non-regular file to a regular file between the stat and the open. |
| * We are assuming that the O_EXCL open handles the case where FILENAME |
| * did not exist and is symlinked to an existing file between the stat |
| * and open. |
| */ |
| |
| /* |
| * If we can open it and fstat the file descriptor, and neither check |
| * revealed that it was a regular file, and the file has not been |
| * replaced, return the file descriptor. |
| */ |
| if (fstat(fd, &finfo2) == 0 && !S_ISREG(finfo2.st_mode) |
| && finfo.st_dev == finfo2.st_dev && finfo.st_ino == finfo2.st_ino) |
| return fd; |
| |
| /* The file has been replaced. badness. */ |
| close(fd); |
| errno = EEXIST; |
| return -1; |
| } |
| |
| /* |
| * Handle here documents. Normally we fork off a process to write the |
| * data to a pipe. If the document is short, we can stuff the data in |
| * the pipe without forking. |
| */ |
| /* openhere needs this forward reference */ |
| static void expandhere(union node *arg, int fd); |
| static int |
| openhere(union node *redir) |
| { |
| int pip[2]; |
| size_t len = 0; |
| |
| if (pipe(pip) < 0) |
| ash_msg_and_raise_error("pipe call failed"); |
| if (redir->type == NHERE) { |
| len = strlen(redir->nhere.doc->narg.text); |
| if (len <= PIPESIZE) { |
| full_write(pip[1], redir->nhere.doc->narg.text, len); |
| goto out; |
| } |
| } |
| if (forkshell((struct job *)NULL, (union node *)NULL, FORK_NOJOB) == 0) { |
| close(pip[0]); |
| signal(SIGINT, SIG_IGN); |
| signal(SIGQUIT, SIG_IGN); |
| signal(SIGHUP, SIG_IGN); |
| #ifdef SIGTSTP |
| signal(SIGTSTP, SIG_IGN); |
| #endif |
| signal(SIGPIPE, SIG_DFL); |
| if (redir->type == NHERE) |
| full_write(pip[1], redir->nhere.doc->narg.text, len); |
| else |
| expandhere(redir->nhere.doc, pip[1]); |
| _exit(EXIT_SUCCESS); |
| } |
| out: |
| close(pip[1]); |
| return pip[0]; |
| } |
| |
| static int |
| openredirect(union node *redir) |
| { |
| char *fname; |
| int f; |
| |
| switch (redir->nfile.type) { |
| case NFROM: |
| fname = redir->nfile.expfname; |
| f = open(fname, O_RDONLY); |
| if (f < 0) |
| goto eopen; |
| break; |
| case NFROMTO: |
| fname = redir->nfile.expfname; |
| f = open(fname, O_RDWR|O_CREAT|O_TRUNC, 0666); |
| if (f < 0) |
| goto ecreate; |
| break; |
| case NTO: |
| /* Take care of noclobber mode. */ |
| if (Cflag) { |
| fname = redir->nfile.expfname; |
| f = noclobberopen(fname); |
| if (f < 0) |
| goto ecreate; |
| break; |
| } |
| /* FALLTHROUGH */ |
| case NCLOBBER: |
| fname = redir->nfile.expfname; |
| f = open(fname, O_WRONLY|O_CREAT|O_TRUNC, 0666); |
| if (f < 0) |
| goto ecreate; |
| break; |
| case NAPPEND: |
| fname = redir->nfile.expfname; |
| f = open(fname, O_WRONLY|O_CREAT|O_APPEND, 0666); |
| if (f < 0) |
| goto ecreate; |
| break; |
| default: |
| #if DEBUG |
| abort(); |
| #endif |
| /* Fall through to eliminate warning. */ |
| case NTOFD: |
| case NFROMFD: |
| f = -1; |
| break; |
| case NHERE: |
| case NXHERE: |
| f = openhere(redir); |
| break; |
| } |
| |
| return f; |
| ecreate: |
| ash_msg_and_raise_error("cannot create %s: %s", fname, errmsg(errno, "nonexistent directory")); |
| eopen: |
| ash_msg_and_raise_error("cannot open %s: %s", fname, errmsg(errno, "no such file")); |
| } |
| |
| /* |
| * Copy a file descriptor to be >= to. Returns -1 |
| * if the source file descriptor is closed, EMPTY if there are no unused |
| * file descriptors left. |
| */ |
| static int |
| copyfd(int from, int to) |
| { |
| int newfd; |
| |
| newfd = fcntl(from, F_DUPFD, to); |
| if (newfd < 0) { |
| if (errno == EMFILE) |
| return EMPTY; |
| ash_msg_and_raise_error("%d: %m", from); |
| } |
| return newfd; |
| } |
| |
| static void |
| dupredirect(union node *redir, int f) |
| { |
| int fd = redir->nfile.fd; |
| |
| if (redir->nfile.type == NTOFD || redir->nfile.type == NFROMFD) { |
| if (redir->ndup.dupfd >= 0) { /* if not ">&-" */ |
| copyfd(redir->ndup.dupfd, fd); |
| } |
| return; |
| } |
| |
| if (f != fd) { |
| copyfd(f, fd); |
| close(f); |
| } |
| } |
| |
| /* |
| * Process a list of redirection commands. If the REDIR_PUSH flag is set, |
| * old file descriptors are stashed away so that the redirection can be |
| * undone by calling popredir. If the REDIR_BACKQ flag is set, then the |
| * standard output, and the standard error if it becomes a duplicate of |
| * stdout, is saved in memory. |
| */ |
| /* flags passed to redirect */ |
| #define REDIR_PUSH 01 /* save previous values of file descriptors */ |
| #define REDIR_SAVEFD2 03 /* set preverrout */ |
| static void |
| redirect(union node *redir, int flags) |
| { |
| union node *n; |
| struct redirtab *sv; |
| int i; |
| int fd; |
| int newfd; |
| |
| g_nullredirs++; |
| if (!redir) { |
| return; |
| } |
| sv = NULL; |
| INT_OFF; |
| if (flags & REDIR_PUSH) { |
| sv = ckmalloc(sizeof(*sv)); |
| sv->next = redirlist; |
| redirlist = sv; |
| sv->nullredirs = g_nullredirs - 1; |
| for (i = 0; i < 10; i++) |
| sv->renamed[i] = EMPTY; |
| g_nullredirs = 0; |
| } |
| n = redir; |
| do { |
| fd = n->nfile.fd; |
| if ((n->nfile.type == NTOFD || n->nfile.type == NFROMFD) |
| && n->ndup.dupfd == fd) |
| continue; /* redirect from/to same file descriptor */ |
| |
| newfd = openredirect(n); |
| if (fd == newfd) { |
| /* Descriptor wasn't open before redirect. |
| * Mark it for close in the future */ |
| if (sv && sv->renamed[fd] == EMPTY) |
| sv->renamed[fd] = CLOSED; |
| continue; |
| } |
| if (sv && sv->renamed[fd] == EMPTY) { |
| i = fcntl(fd, F_DUPFD, 10); |
| |
| if (i == -1) { |
| i = errno; |
| if (i != EBADF) { |
| close(newfd); |
| errno = i; |
| ash_msg_and_raise_error("%d: %m", fd); |
| /* NOTREACHED */ |
| } |
| } else { |
| sv->renamed[fd] = i; |
| close(fd); |
| } |
| } else { |
| close(fd); |
| } |
| dupredirect(n, newfd); |
| } while ((n = n->nfile.next)); |
| INT_ON; |
| if ((flags & REDIR_SAVEFD2) && sv && sv->renamed[2] >= 0) |
| preverrout_fd = sv->renamed[2]; |
| } |
| |
| /* |
| * Undo the effects of the last redirection. |
| */ |
| static void |
| popredir(int drop) |
| { |
| struct redirtab *rp; |
| int i; |
| |
| if (--g_nullredirs >= 0) |
| return; |
| INT_OFF; |
| rp = redirlist; |
| for (i = 0; i < 10; i++) { |
| if (rp->renamed[i] == CLOSED) { |
| if (!drop) |
| close(i); |
| continue; |
| } |
| if (rp->renamed[i] != EMPTY) { |
| if (!drop) { |
| close(i); |
| copyfd(rp->renamed[i], i); |
| } |
| close(rp->renamed[i]); |
| } |
| } |
| redirlist = rp->next; |
| g_nullredirs = rp->nullredirs; |
| free(rp); |
| INT_ON; |
| } |
| |
| /* |
| * Undo all redirections. Called on error or interrupt. |
| */ |
| |
| /* |
| * Discard all saved file descriptors. |
| */ |
| static void |
| clearredir(int drop) |
| { |
| for (;;) { |
| g_nullredirs = 0; |
| if (!redirlist) |
| break; |
| popredir(drop); |
| } |
| } |
| |
| static int |
| redirectsafe(union node *redir, int flags) |
| { |
| int err; |
| volatile int saveint; |
| struct jmploc *volatile savehandler = exception_handler; |
| struct jmploc jmploc; |
| |
| SAVE_INT(saveint); |
| err = setjmp(jmploc.loc) * 2; |
| if (!err) { |
| exception_handler = &jmploc; |
| redirect(redir, flags); |
| } |
| exception_handler = savehandler; |
| if (err && exception != EXERROR) |
| longjmp(exception_handler->loc, 1); |
| RESTORE_INT(saveint); |
| return err; |
| } |
| |
| |
| /* ============ Routines to expand arguments to commands |
| * |
| * We have to deal with backquotes, shell variables, and file metacharacters. |
| */ |
| |
| #if ENABLE_ASH_MATH_SUPPORT_64 |
| typedef int64_t arith_t; |
| #define arith_t_type long long |
| #else |
| typedef long arith_t; |
| #define arith_t_type long |
| #endif |
| |
| #if ENABLE_ASH_MATH_SUPPORT |
| static arith_t dash_arith(const char *); |
| static arith_t arith(const char *expr, int *perrcode); |
| #endif |
| |
| /* |
| * expandarg flags |
| */ |
| #define EXP_FULL 0x1 /* perform word splitting & file globbing */ |
| #define EXP_TILDE 0x2 /* do normal tilde expansion */ |
| #define EXP_VARTILDE 0x4 /* expand tildes in an assignment */ |
| #define EXP_REDIR 0x8 /* file glob for a redirection (1 match only) */ |
| #define EXP_CASE 0x10 /* keeps quotes around for CASE pattern */ |
| #define EXP_RECORD 0x20 /* need to record arguments for ifs breakup */ |
| #define EXP_VARTILDE2 0x40 /* expand tildes after colons only */ |
| #define EXP_WORD 0x80 /* expand word in parameter expansion */ |
| #define EXP_QWORD 0x100 /* expand word in quoted parameter expansion */ |
| /* |
| * _rmescape() flags |
| */ |
| #define RMESCAPE_ALLOC 0x1 /* Allocate a new string */ |
| #define RMESCAPE_GLOB 0x2 /* Add backslashes for glob */ |
| #define RMESCAPE_QUOTED 0x4 /* Remove CTLESC unless in quotes */ |
| #define RMESCAPE_GROW 0x8 /* Grow strings instead of stalloc */ |
| #define RMESCAPE_HEAP 0x10 /* Malloc strings instead of stalloc */ |
| |
| /* |
| * Structure specifying which parts of the string should be searched |
| * for IFS characters. |
| */ |
| struct ifsregion { |
| struct ifsregion *next; /* next region in list */ |
| int begoff; /* offset of start of region */ |
| int endoff; /* offset of end of region */ |
| int nulonly; /* search for nul bytes only */ |
| }; |
| |
| struct arglist { |
| struct strlist *list; |
| struct strlist **lastp; |
| }; |
| |
| /* output of current string */ |
| static char *expdest; |
| /* list of back quote expressions */ |
| static struct nodelist *argbackq; |
| /* first struct in list of ifs regions */ |
| static struct ifsregion ifsfirst; |
| /* last struct in list */ |
| static struct ifsregion *ifslastp; |
| /* holds expanded arg list */ |
| static struct arglist exparg; |
| |
| /* |
| * Our own itoa(). |
| */ |
| static int |
| cvtnum(arith_t num) |
| { |
| int len; |
| |
| expdest = makestrspace(32, expdest); |
| #if ENABLE_ASH_MATH_SUPPORT_64 |
| len = fmtstr(expdest, 32, "%lld", (long long) num); |
| #else |
| len = fmtstr(expdest, 32, "%ld", num); |
| #endif |
| STADJUST(len, expdest); |
| return len; |
| } |
| |
| static size_t |
| esclen(const char *start, const char *p) |
| { |
| size_t esc = 0; |
| |
| while (p > start && *--p == CTLESC) { |
| esc++; |
| } |
| return esc; |
| } |
| |
| /* |
| * Remove any CTLESC characters from a string. |
| */ |
| static char * |
| _rmescapes(char *str, int flag) |
| { |
| static const char qchars[] ALIGN1 = { CTLESC, CTLQUOTEMARK, '\0' }; |
| |
| char *p, *q, *r; |
| unsigned inquotes; |
| int notescaped; |
| int globbing; |
| |
| p = strpbrk(str, qchars); |
| if (!p) { |
| return str; |
| } |
| q = p; |
| r = str; |
| if (flag & RMESCAPE_ALLOC) { |
| size_t len = p - str; |
| size_t fulllen = len + strlen(p) + 1; |
| |
| if (flag & RMESCAPE_GROW) { |
| r = makestrspace(fulllen, expdest); |
| } else if (flag & RMESCAPE_HEAP) { |
| r = ckmalloc(fulllen); |
| } else { |
| r = stalloc(fulllen); |
| } |
| q = r; |
| if (len > 0) { |
| q = (char *)memcpy(q, str, len) + len; |
| } |
| } |
| inquotes = (flag & RMESCAPE_QUOTED) ^ RMESCAPE_QUOTED; |
| globbing = flag & RMESCAPE_GLOB; |
| notescaped = globbing; |
| while (*p) { |
| if (*p == CTLQUOTEMARK) { |
| inquotes = ~inquotes; |
| p++; |
| notescaped = globbing; |
| continue; |
| } |
| if (*p == '\\') { |
| /* naked back slash */ |
| notescaped = 0; |
| goto copy; |
| } |
| if (*p == CTLESC) { |
| p++; |
| if (notescaped && inquotes && *p != '/') { |
| *q++ = '\\'; |
| } |
| } |
| notescaped = globbing; |
| copy: |
| *q++ = *p++; |
| } |
| *q = '\0'; |
| if (flag & RMESCAPE_GROW) { |
| expdest = r; |
| STADJUST(q - r + 1, expdest); |
| } |
| return r; |
| } |
| #define rmescapes(p) _rmescapes((p), 0) |
| |
| #define pmatch(a, b) !fnmatch((a), (b), 0) |
| |
| /* |
| * Prepare a pattern for a expmeta (internal glob(3)) call. |
| * |
| * Returns an stalloced string. |
| */ |
| static char * |
| preglob(const char *pattern, int quoted, int flag) |
| { |
| flag |= RMESCAPE_GLOB; |
| if (quoted) { |
| flag |= RMESCAPE_QUOTED; |
| } |
| return _rmescapes((char *)pattern, flag); |
| } |
| |
| /* |
| * Put a string on the stack. |
| */ |
| static void |
| memtodest(const char *p, size_t len, int syntax, int quotes) |
| { |
| char *q = expdest; |
| |
| q = makestrspace(len * 2, q); |
| |
| while (len--) { |
| int c = signed_char2int(*p++); |
| if (!c) |
| continue; |
| if (quotes && (SIT(c, syntax) == CCTL || SIT(c, syntax) == CBACK)) |
| USTPUTC(CTLESC, q); |
| USTPUTC(c, q); |
| } |
| |
| expdest = q; |
| } |
| |
| static void |
| strtodest(const char *p, int syntax, int quotes) |
| { |
| memtodest(p, strlen(p), syntax, quotes); |
| } |
| |
| /* |
| * Record the fact that we have to scan this region of the |
| * string for IFS characters. |
| */ |
| static void |
| recordregion(int start, int end, int nulonly) |
| { |
| struct ifsregion *ifsp; |
| |
| if (ifslastp == NULL) { |
| ifsp = &ifsfirst; |
| } else { |
| INT_OFF; |
| ifsp = ckzalloc(sizeof(*ifsp)); |
| /*ifsp->next = NULL; - ckzalloc did it */ |
| ifslastp->next = ifsp; |
| INT_ON; |
| } |
| ifslastp = ifsp; |
| ifslastp->begoff = start; |
| ifslastp->endoff = end; |
| ifslastp->nulonly = nulonly; |
| } |
| |
| static void |
| removerecordregions(int endoff) |
| { |
| if (ifslastp == NULL) |
| return; |
| |
| if (ifsfirst.endoff > endoff) { |
| while (ifsfirst.next != NULL) { |
| struct ifsregion *ifsp; |
| INT_OFF; |
| ifsp = ifsfirst.next->next; |
| free(ifsfirst.next); |
| ifsfirst.next = ifsp; |
| INT_ON; |
| } |
| if (ifsfirst.begoff > endoff) |
| ifslastp = NULL; |
| else { |
| ifslastp = &ifsfirst; |
| ifsfirst.endoff = endoff; |
| } |
| return; |
| } |
| |
| ifslastp = &ifsfirst; |
| while (ifslastp->next && ifslastp->next->begoff < endoff) |
| ifslastp=ifslastp->next; |
| while (ifslastp->next != NULL) { |
| struct ifsregion *ifsp; |
| INT_OFF; |
| ifsp = ifslastp->next->next; |
| free(ifslastp->next); |
| ifslastp->next = ifsp; |
| INT_ON; |
| } |
| if (ifslastp->endoff > endoff) |
| ifslastp->endoff = endoff; |
| } |
| |
| static char * |
| exptilde(char *startp, char *p, int flag) |
| { |
| char c; |
| char *name; |
| struct passwd *pw; |
| const char *home; |
| int quotes = flag & (EXP_FULL | EXP_CASE); |
| int startloc; |
| |
| name = p + 1; |
| |
| while ((c = *++p) != '\0') { |
| switch (c) { |
| case CTLESC: |
| return startp; |
| case CTLQUOTEMARK: |
| return startp; |
| case ':': |
| if (flag & EXP_VARTILDE) |
| goto done; |
| break; |
| case '/': |
| case CTLENDVAR: |
| goto done; |
| } |
| } |
| done: |
| *p = '\0'; |
| if (*name == '\0') { |
| home = lookupvar(homestr); |
| } else { |
| pw = getpwnam(name); |
| if (pw == NULL) |
| goto lose; |
| home = pw->pw_dir; |
| } |
| if (!home || !*home) |
| goto lose; |
| *p = c; |
| startloc = expdest - (char *)stackblock(); |
| strtodest(home, SQSYNTAX, quotes); |
| recordregion(startloc, expdest - (char *)stackblock(), 0); |
| return p; |
| lose: |
| *p = c; |
| return startp; |
| } |
| |
| /* |
| * Execute a command inside back quotes. If it's a builtin command, we |
| * want to save its output in a block obtained from malloc. Otherwise |
| * we fork off a subprocess and get the output of the command via a pipe. |
| * Should be called with interrupts off. |
| */ |
| struct backcmd { /* result of evalbackcmd */ |
| int fd; /* file descriptor to read from */ |
| int nleft; /* number of chars in buffer */ |
| char *buf; /* buffer */ |
| struct job *jp; /* job structure for command */ |
| }; |
| |
| /* These forward decls are needed to use "eval" code for backticks handling: */ |
| static uint8_t back_exitstatus; /* exit status of backquoted command */ |
| #define EV_EXIT 01 /* exit after evaluating tree */ |
| static void evaltree(union node *, int); |
| |
| static void |
| evalbackcmd(union node *n, struct backcmd *result) |
| { |
| int saveherefd; |
| |
| result->fd = -1; |
| result->buf = NULL; |
| result->nleft = 0; |
| result->jp = NULL; |
| if (n == NULL) { |
| goto out; |
| } |
| |
| saveherefd = herefd; |
| herefd = -1; |
| |
| { |
| int pip[2]; |
| struct job *jp; |
| |
| if (pipe(pip) < 0) |
| ash_msg_and_raise_error("pipe call failed"); |
| jp = makejob(/*n,*/ 1); |
| if (forkshell(jp, n, FORK_NOJOB) == 0) { |
| FORCE_INT_ON; |
| close(pip[0]); |
| if (pip[1] != 1) { |
| close(1); |
| copyfd(pip[1], 1); |
| close(pip[1]); |
| } |
| eflag = 0; |
| evaltree(n, EV_EXIT); /* actually evaltreenr... */ |
| /* NOTREACHED */ |
| } |
| close(pip[1]); |
| result->fd = pip[0]; |
| result->jp = jp; |
| } |
| herefd = saveherefd; |
| out: |
| TRACE(("evalbackcmd done: fd=%d buf=0x%x nleft=%d jp=0x%x\n", |
| result->fd, result->buf, result->nleft, result->jp)); |
| } |
| |
| /* |
| * Expand stuff in backwards quotes. |
| */ |
| static void |
| expbackq(union node *cmd, int quoted, int quotes) |
| { |
| struct backcmd in; |
| int i; |
| char buf[128]; |
| char *p; |
| char *dest; |
| int startloc; |
| int syntax = quoted ? DQSYNTAX : BASESYNTAX; |
| struct stackmark smark; |
| |
| INT_OFF; |
| setstackmark(&smark); |
| dest = expdest; |
| startloc = dest - (char *)stackblock(); |
| grabstackstr(dest); |
| evalbackcmd(cmd, &in); |
| popstackmark(&smark); |
| |
| p = in.buf; |
| i = in.nleft; |
| if (i == 0) |
| goto read; |
| for (;;) { |
| memtodest(p, i, syntax, quotes); |
| read: |
| if (in.fd < 0) |
| break; |
| i = nonblock_safe_read(in.fd, buf, sizeof(buf)); |
| TRACE(("expbackq: read returns %d\n", i)); |
| if (i <= 0) |
| break; |
| p = buf; |
| } |
| |
| free(in.buf); |
| if (in.fd >= 0) { |
| close(in.fd); |
| back_exitstatus = waitforjob(in.jp); |
| } |
| INT_ON; |
| |
| /* Eat all trailing newlines */ |
| dest = expdest; |
| for (; dest > (char *)stackblock() && dest[-1] == '\n';) |
| STUNPUTC(dest); |
| expdest = dest; |
| |
| if (quoted == 0) |
| recordregion(startloc, dest - (char *)stackblock(), 0); |
| TRACE(("evalbackq: size=%d: \"%.*s\"\n", |
| (dest - (char *)stackblock()) - startloc, |
| (dest - (char *)stackblock()) - startloc, |
| stackblock() + startloc)); |
| } |
| |
| #if ENABLE_ASH_MATH_SUPPORT |
| /* |
| * Expand arithmetic expression. Backup to start of expression, |
| * evaluate, place result in (backed up) result, adjust string position. |
| */ |
| static void |
| expari(int quotes) |
| { |
| char *p, *start; |
| int begoff; |
| int flag; |
| int len; |
| |
| /* ifsfree(); */ |
| |
| /* |
| * This routine is slightly over-complicated for |
| * efficiency. Next we scan backwards looking for the |
| * start of arithmetic. |
| */ |
| start = stackblock(); |
| p = expdest - 1; |
| *p = '\0'; |
| p--; |
| do { |
| int esc; |
| |
| while (*p != CTLARI) { |
| p--; |
| #if DEBUG |
| if (p < start) { |
| ash_msg_and_raise_error("missing CTLARI (shouldn't happen)"); |
| } |
| #endif |
| } |
| |
| esc = esclen(start, p); |
| if (!(esc % 2)) { |
| break; |
| } |
| |
| p -= esc + 1; |
| } while (1); |
| |
| begoff = p - start; |
| |
| removerecordregions(begoff); |
| |
| flag = p[1]; |
| |
| expdest = p; |
| |
| if (quotes) |
| rmescapes(p + 2); |
| |
| len = cvtnum(dash_arith(p + 2)); |
| |
| if (flag != '"') |
| recordregion(begoff, begoff + len, 0); |
| } |
| #endif |
| |
| /* argstr needs it */ |
| static char *evalvar(char *p, int flag, struct strlist *var_str_list); |
| |
| /* |
| * Perform variable and command substitution. If EXP_FULL is set, output CTLESC |
| * characters to allow for further processing. Otherwise treat |
| * $@ like $* since no splitting will be performed. |
| * |
| * var_str_list (can be NULL) is a list of "VAR=val" strings which take precedence |
| * over shell varables. Needed for "A=a B=$A; echo $B" case - we use it |
| * for correct expansion of "B=$A" word. |
| */ |
| static void |
| argstr(char *p, int flag, struct strlist *var_str_list) |
| { |
| static const char spclchars[] ALIGN1 = { |
| '=', |
| ':', |
| CTLQUOTEMARK, |
| CTLENDVAR, |
| CTLESC, |
| CTLVAR, |
| CTLBACKQ, |
| CTLBACKQ | CTLQUOTE, |
| #if ENABLE_ASH_MATH_SUPPORT |
| CTLENDARI, |
| #endif |
| 0 |
| }; |
| const char *reject = spclchars; |
| int c; |
| int quotes = flag & (EXP_FULL | EXP_CASE); /* do CTLESC */ |
| int breakall = flag & EXP_WORD; |
| int inquotes; |
| size_t length; |
| int startloc; |
| |
| if (!(flag & EXP_VARTILDE)) { |
| reject += 2; |
| } else if (flag & EXP_VARTILDE2) { |
| reject++; |
| } |
| inquotes = 0; |
| length = 0; |
| if (flag & EXP_TILDE) { |
| char *q; |
| |
| flag &= ~EXP_TILDE; |
| tilde: |
| q = p; |
| if (*q == CTLESC && (flag & EXP_QWORD)) |
| q++; |
| if (*q == '~') |
| p = exptilde(p, q, flag); |
| } |
| start: |
| startloc = expdest - (char *)stackblock(); |
| for (;;) { |
| length += strcspn(p + length, reject); |
| c = p[length]; |
| if (c && (!(c & 0x80) |
| #if ENABLE_ASH_MATH_SUPPORT |
| || c == CTLENDARI |
| #endif |
| )) { |
| /* c == '=' || c == ':' || c == CTLENDARI */ |
| length++; |
| } |
| if (length > 0) { |
| int newloc; |
| expdest = stack_nputstr(p, length, expdest); |
| newloc = expdest - (char *)stackblock(); |
| if (breakall && !inquotes && newloc > startloc) { |
| recordregion(startloc, newloc, 0); |
| } |
| startloc = newloc; |
| } |
| p += length + 1; |
| length = 0; |
| |
| switch (c) { |
| case '\0': |
| goto breakloop; |
| case '=': |
| if (flag & EXP_VARTILDE2) { |
| p--; |
| continue; |
| } |
| flag |= EXP_VARTILDE2; |
| reject++; |
| /* fall through */ |
| case ':': |
| /* |
| * sort of a hack - expand tildes in variable |
| * assignments (after the first '=' and after ':'s). |
| */ |
| if (*--p == '~') { |
| goto tilde; |
| } |
| continue; |
| } |
| |
| switch (c) { |
| case CTLENDVAR: /* ??? */ |
| goto breakloop; |
| case CTLQUOTEMARK: |
| /* "$@" syntax adherence hack */ |
| if ( |
| !inquotes && |
| !memcmp(p, dolatstr, 4) && |
| (p[4] == CTLQUOTEMARK || ( |
| p[4] == CTLENDVAR && |
| p[5] == CTLQUOTEMARK |
| )) |
| ) { |
| p = evalvar(p + 1, flag, /* var_str_list: */ NULL) + 1; |
| goto start; |
| } |
| inquotes = !inquotes; |
| addquote: |
| if (quotes) { |
| p--; |
| length++; |
| startloc++; |
| } |
| break; |
| case CTLESC: |
| startloc++; |
| length++; |
| goto addquote; |
| case CTLVAR: |
| p = evalvar(p, flag, var_str_list); |
| goto start; |
| case CTLBACKQ: |
| c = 0; |
| case CTLBACKQ|CTLQUOTE: |
| expbackq(argbackq->n, c, quotes); |
| argbackq = argbackq->next; |
| goto start; |
| #if ENABLE_ASH_MATH_SUPPORT |
| case CTLENDARI: |
| p--; |
| expari(quotes); |
| goto start; |
| #endif |
| } |
| } |
| breakloop: |
| ; |
| } |
| |
| static char * |
| scanleft(char *startp, char *rmesc, char *rmescend ATTRIBUTE_UNUSED, char *str, int quotes, |
| int zero) |
| { |
| // This commented out code was added by James Simmons <jsimmons@infradead.org> |
| // as part of a larger change when he added support for ${var/a/b}. |
| // However, it broke # and % operators: |
| // |
| //var=ababcdcd |
| // ok bad |
| //echo ${var#ab} abcdcd abcdcd |
| //echo ${var##ab} abcdcd abcdcd |
| //echo ${var#a*b} abcdcd ababcdcd (!) |
| //echo ${var##a*b} cdcd cdcd |
| //echo ${var#?} babcdcd ababcdcd (!) |
| //echo ${var##?} babcdcd babcdcd |
| //echo ${var#*} ababcdcd babcdcd (!) |
| //echo ${var##*} |
| //echo ${var%cd} ababcd ababcd |
| //echo ${var%%cd} ababcd abab (!) |
| //echo ${var%c*d} ababcd ababcd |
| //echo ${var%%c*d} abab ababcdcd (!) |
| //echo ${var%?} ababcdc ababcdc |
| //echo ${var%%?} ababcdc ababcdcd (!) |
| //echo ${var%*} ababcdcd ababcdcd |
| //echo ${var%%*} |
| // |
| // Commenting it back out helped. Remove it completely if it really |
| // is not needed. |
| |
| char *loc, *loc2; //, *full; |
| char c; |
| |
| loc = startp; |
| loc2 = rmesc; |
| do { |
| int match; // = strlen(str); |
| const char *s = loc2; |
| |
| c = *loc2; |
| if (zero) { |
| *loc2 = '\0'; |
| s = rmesc; |
| } |
| match = pmatch(str, s); // this line was deleted |
| |
| // // chop off end if its '*' |
| // full = strrchr(str, '*'); |
| // if (full && full != str) |
| // match--; |
| // |
| // // If str starts with '*' replace with s. |
| // if ((*str == '*') && strlen(s) >= match) { |
| // full = xstrdup(s); |
| // strncpy(full+strlen(s)-match+1, str+1, match-1); |
| // } else |
| // full = xstrndup(str, match); |
| // match = strncmp(s, full, strlen(full)); |
| // free(full); |
| // |
| *loc2 = c; |
| if (match) // if (!match) |
| return loc; |
| if (quotes && *loc == CTLESC) |
| loc++; |
| loc++; |
| loc2++; |
| } while (c); |
| return 0; |
| } |
| |
| static char * |
| scanright(char *startp, char *rmesc, char *rmescend, char *str, int quotes, |
| int zero) |
| { |
| int esc = 0; |
| char *loc; |
| char *loc2; |
| |
| for (loc = str - 1, loc2 = rmescend; loc >= startp; loc2--) { |
| int match; |
| char c = *loc2; |
| const char *s = loc2; |
| if (zero) { |
| *loc2 = '\0'; |
| s = rmesc; |
| } |
| match = pmatch(str, s); |
| *loc2 = c; |
| if (match) |
| return loc; |
| loc--; |
| if (quotes) { |
| if (--esc < 0) { |
| esc = esclen(startp, loc); |
| } |
| if (esc % 2) { |
| esc--; |
| loc--; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static void varunset(const char *, const char *, const char *, int) ATTRIBUTE_NORETURN; |
| static void |
| varunset(const char *end, const char *var, const char *umsg, int varflags) |
| { |
| const char *msg; |
| const char *tail; |
| |
| tail = nullstr; |
| msg = "parameter not set"; |
| if (umsg) { |
| if (*end == CTLENDVAR) { |
| if (varflags & VSNUL) |
| tail = " or null"; |
| } else |
| msg = umsg; |
| } |
| ash_msg_and_raise_error("%.*s: %s%s", end - var - 1, var, msg, tail); |
| } |
| |
| #if ENABLE_ASH_BASH_COMPAT |
| static char * |
| parse_sub_pattern(char *arg, int inquotes) |
| { |
| char *idx, *repl = NULL; |
| unsigned char c; |
| |
| idx = arg; |
| while (1) { |
| c = *arg; |
| if (!c) |
| break; |
| if (c == '/') { |
| /* Only the first '/' seen is our separator */ |
| if (!repl) { |
| repl = idx + 1; |
| c = '\0'; |
| } |
| } |
| *idx++ = c; |
| if (!inquotes && c == '\\' && arg[1] == '\\') |
| arg++; /* skip both \\, not just first one */ |
| arg++; |
| } |
| *idx = c; /* NUL */ |
| |
| return repl; |
| } |
| #endif /* ENABLE_ASH_BASH_COMPAT */ |
| |
| static const char * |
| subevalvar(char *p, char *str, int strloc, int subtype, |
| int startloc, int varflags, int quotes, struct strlist *var_str_list) |
| { |
| struct nodelist *saveargbackq = argbackq; |
| char *startp; |
| char *loc; |
| char *rmesc, *rmescend; |
| USE_ASH_BASH_COMPAT(char *repl = NULL;) |
| USE_ASH_BASH_COMPAT(char null = '\0';) |
| USE_ASH_BASH_COMPAT(int pos, len, orig_len;) |
| int saveherefd = herefd; |
| int amount, workloc, resetloc; |
| int zero; |
| char *(*scan)(char*, char*, char*, char*, int, int); |
| |
| herefd = -1; |
| argstr(p, (subtype != VSASSIGN && subtype != VSQUESTION) ? EXP_CASE : 0, |
| var_str_list); |
| STPUTC('\0', expdest); |
| herefd = saveherefd; |
| argbackq = saveargbackq; |
| startp = (char *)stackblock() + startloc; |
| |
| switch (subtype) { |
| case VSASSIGN: |
| setvar(str, startp, 0); |
| amount = startp - expdest; |
| STADJUST(amount, expdest); |
| return startp; |
| |
| #if ENABLE_ASH_BASH_COMPAT |
| case VSSUBSTR: |
| loc = str = stackblock() + strloc; |
| // TODO: number() instead? It does error checking... |
| pos = atoi(loc); |
| len = str - startp - 1; |
| |
| /* *loc != '\0', guaranteed by parser */ |
| if (quotes) { |
| char *ptr; |
| |
| /* We must adjust the length by the number of escapes we find. */ |
| for (ptr = startp; ptr < (str - 1); ptr++) { |
| if(*ptr == CTLESC) { |
| len--; |
| ptr++; |
| } |
| } |
| } |
| orig_len = len; |
| |
| if (*loc++ == ':') { |
| // TODO: number() instead? It does error checking... |
| len = atoi(loc); |
| } else { |
| len = orig_len; |
| while (*loc && *loc != ':') |
| loc++; |
| if (*loc++ == ':') |
| // TODO: number() instead? It does error checking... |
| len = atoi(loc); |
| } |
| if (pos >= orig_len) { |
| pos = 0; |
| len = 0; |
| } |
| if (len > (orig_len - pos)) |
| len = orig_len - pos; |
| |
| for (str = startp; pos; str++, pos--) { |
| if (quotes && *str == CTLESC) |
| str++; |
| } |
| for (loc = startp; len; len--) { |
| if (quotes && *str == CTLESC) |
| *loc++ = *str++; |
| *loc++ = *str++; |
| } |
| *loc = '\0'; |
| amount = loc - expdest; |
| STADJUST(amount, expdest); |
| return loc; |
| #endif |
| |
| case VSQUESTION: |
| varunset(p, str, startp, varflags); |
| /* NOTREACHED */ |
| } |
| resetloc = expdest - (char *)stackblock(); |
| |
| /* We'll comeback here if we grow the stack while handling |
| * a VSREPLACE or VSREPLACEALL, since our pointers into the |
| * stack will need rebasing, and we'll need to remove our work |
| * areas each time |
| */ |
| USE_ASH_BASH_COMPAT(restart:) |
| |
| amount = expdest - ((char *)stackblock() + resetloc); |
| STADJUST(-amount, expdest); |
| startp = (char *)stackblock() + startloc; |
| |
| rmesc = startp; |
| rmescend = (char *)stackblock() + strloc; |
| if (quotes) { |
| rmesc = _rmescapes(startp, RMESCAPE_ALLOC | RMESCAPE_GROW); |
| if (rmesc != startp) { |
| rmescend = expdest; |
| startp = (char *)stackblock() + startloc; |
| } |
| } |
| rmescend--; |
| str = (char *)stackblock() + strloc; |
| preglob(str, varflags & VSQUOTE, 0); |
| workloc = expdest - (char *)stackblock(); |
| |
| #if ENABLE_ASH_BASH_COMPAT |
| if (subtype == VSREPLACE || subtype == VSREPLACEALL) { |
| char *idx, *end, *restart_detect; |
| |
| if(!repl) { |
| repl = parse_sub_pattern(str, varflags & VSQUOTE); |
| if (!repl) |
| repl = &null; |
| } |
| |
| /* If there's no pattern to match, return the expansion unmolested */ |
| if (*str == '\0') |
| return 0; |
| |
| len = 0; |
| idx = startp; |
| end = str - 1; |
| while (idx < end) { |
| loc = scanright(idx, rmesc, rmescend, str, quotes, 1); |
| if (!loc) { |
| /* No match, advance */ |
| restart_detect = stackblock(); |
| STPUTC(*idx, expdest); |
| if (quotes && *idx == CTLESC) { |
| idx++; |
| len++; |
| STPUTC(*idx, expdest); |
| } |
| if (stackblock() != restart_detect) |
| goto restart; |
| idx++; |
| len++; |
| rmesc++; |
| continue; |
| } |
| |
| if (subtype == VSREPLACEALL) { |
| while (idx < loc) { |
| if (quotes && *idx == CTLESC) |
| idx++; |
| idx++; |
| rmesc++; |
| } |
| } else |
| idx = loc; |
| |
| for (loc = repl; *loc; loc++) { |
| restart_detect = stackblock(); |
| STPUTC(*loc, expdest); |
| if (stackblock() != restart_detect) |
| goto restart; |
| len++; |
| } |
| |
| if (subtype == VSREPLACE) { |
| while (*idx) { |
| restart_detect = stackblock(); |
| STPUTC(*idx, expdest); |
| if (stackblock() != restart_detect) |
| goto restart; |
| len++; |
| idx++; |
| } |
| break; |
| } |
| } |
| |
| /* We've put the replaced text into a buffer at workloc, now |
| * move it to the right place and adjust the stack. |
| */ |
| startp = stackblock() + startloc; |
| STPUTC('\0', expdest); |
| memmove(startp, stackblock() + workloc, len); |
| startp[len++] = '\0'; |
| amount = expdest - ((char *)stackblock() + startloc + len - 1); |
| STADJUST(-amount, expdest); |
| return startp; |
| } |
| #endif /* ENABLE_ASH_BASH_COMPAT */ |
| |
| subtype -= VSTRIMRIGHT; |
| #if DEBUG |
| if (subtype < 0 || subtype > 7) |
| abort(); |
| #endif |
| /* zero = subtype == VSTRIMLEFT || subtype == VSTRIMLEFTMAX */ |
| zero = subtype >> 1; |
| /* VSTRIMLEFT/VSTRIMRIGHTMAX -> scanleft */ |
| scan = (subtype & 1) ^ zero ? scanleft : scanright; |
| |
| loc = scan(startp, rmesc, rmescend, str, quotes, zero); |
| if (loc) { |
| if (zero) { |
| memmove(startp, loc, str - loc); |
| loc = startp + (str - loc) - 1; |
| } |
| *loc = '\0'; |
| amount = loc - expdest; |
| STADJUST(amount, expdest); |
| } |
| return loc; |
| } |
| |
| /* |
| * Add the value of a specialized variable to the stack string. |
| */ |
| static ssize_t |
| varvalue(char *name, int varflags, int flags, struct strlist *var_str_list) |
| { |
| int num; |
| char *p; |
| int i; |
| int sep = 0; |
| int sepq = 0; |
| ssize_t len = 0; |
| char **ap; |
| int syntax; |
| int quoted = varflags & VSQUOTE; |
| int subtype = varflags & VSTYPE; |
| int quotes = flags & (EXP_FULL | EXP_CASE); |
| |
| if (quoted && (flags & EXP_FULL)) |
| sep = 1 << CHAR_BIT; |
| |
| syntax = quoted ? DQSYNTAX : BASESYNTAX; |
| switch (*name) { |
| case '$': |
| num = rootpid; |
| goto numvar; |
| case '?': |
| num = exitstatus; |
| goto numvar; |
| case '#': |
| num = shellparam.nparam; |
| goto numvar; |
| case '!': |
| num = backgndpid; |
| if (num == 0) |
| return -1; |
| numvar: |
| len = cvtnum(num); |
| break; |
| case '-': |
| p = makestrspace(NOPTS, expdest); |
| for (i = NOPTS - 1; i >= 0; i--) { |
| if (optlist[i]) { |
| USTPUTC(optletters(i), p); |
| len++; |
| } |
| } |
| expdest = p; |
| break; |
| case '@': |
| if (sep) |
| goto param; |
| /* fall through */ |
| case '*': |
| sep = ifsset() ? signed_char2int(ifsval()[0]) : ' '; |
| if (quotes && (SIT(sep, syntax) == CCTL || SIT(sep, syntax) == CBACK)) |
| sepq = 1; |
| param: |
| ap = shellparam.p; |
| if (!ap) |
| return -1; |
| while ((p = *ap++)) { |
| size_t partlen; |
| |
| partlen = strlen(p); |
| len += partlen; |
| |
| if (!(subtype == VSPLUS || subtype == VSLENGTH)) |
| memtodest(p, partlen, syntax, quotes); |
| |
| if (*ap && sep) { |
| char *q; |
| |
| len++; |
| if (subtype == VSPLUS || subtype == VSLENGTH) { |
| continue; |
| } |
| q = expdest; |
| if (sepq) |
| STPUTC(CTLESC, q); |
| STPUTC(sep, q); |
| expdest = q; |
| } |
| } |
| return len; |
| case '0': |
| case '1': |
| case '2': |
| case '3': |
| case '4': |
| case '5': |
| case '6': |
| case '7': |
| case '8': |
| case '9': |
| // TODO: number() instead? It does error checking... |
| num = atoi(name); |
| if (num < 0 || num > shellparam.nparam) |
| return -1; |
| p = num ? shellparam.p[num - 1] : arg0; |
| goto value; |
| default: |
| /* NB: name has form "VAR=..." */ |
| |
| /* "A=a B=$A" case: var_str_list is a list of "A=a" strings |
| * which should be considered before we check variables. */ |
| if (var_str_list) { |
| unsigned name_len = (strchrnul(name, '=') - name) + 1; |
| p = NULL; |
| do { |
| char *str, *eq; |
| str = var_str_list->text; |
| eq = strchr(str, '='); |
| if (!eq) /* stop at first non-assignment */ |
| break; |
| eq++; |
| if (name_len == (unsigned)(eq - str) |
| && strncmp(str, name, name_len) == 0) { |
| p = eq; |
| /* goto value; - WRONG! */ |
| /* think "A=1 A=2 B=$A" */ |
| } |
| var_str_list = var_str_list->next; |
| } while (var_str_list); |
| if (p) |
| goto value; |
| } |
| p = lookupvar(name); |
| value: |
| if (!p) |
| return -1; |
| |
| len = strlen(p); |
| if (!(subtype == VSPLUS || subtype == VSLENGTH)) |
| memtodest(p, len, syntax, quotes); |
| return len; |
| } |
| |
| if (subtype == VSPLUS || subtype == VSLENGTH) |
| STADJUST(-len, expdest); |
| return len; |
| } |
| |
| /* |
| * Expand a variable, and return a pointer to the next character in the |
| * input string. |
| */ |
| static char * |
| evalvar(char *p, int flag, struct strlist *var_str_list) |
| { |
| char varflags; |
| char subtype; |
| char quoted; |
| char easy; |
| char *var; |
| int patloc; |
| int startloc; |
| ssize_t varlen; |
| |
| varflags = *p++; |
| subtype = varflags & VSTYPE; |
| quoted = varflags & VSQUOTE; |
| var = p; |
| easy = (!quoted || (*var == '@' && shellparam.nparam)); |
| startloc = expdest - (char *)stackblock(); |
| p = strchr(p, '=') + 1; |
| |
| again: |
| varlen = varvalue(var, varflags, flag, var_str_list); |
| if (varflags & VSNUL) |
| varlen--; |
| |
| if (subtype == VSPLUS) { |
| varlen = -1 - varlen; |
| goto vsplus; |
| } |
| |
| if (subtype == VSMINUS) { |
| vsplus: |
| if (varlen < 0) { |
| argstr( |
| p, flag | EXP_TILDE | |
| (quoted ? EXP_QWORD : EXP_WORD), |
| var_str_list |
| ); |
| goto end; |
| } |
| if (easy) |
| goto record; |
| goto end; |
| } |
| |
| if (subtype == VSASSIGN || subtype == VSQUESTION) { |
| if (varlen < 0) { |
| if (subevalvar(p, var, /* strloc: */ 0, |
| subtype, startloc, varflags, |
| /* quotes: */ 0, |
| var_str_list) |
| ) { |
| varflags &= ~VSNUL; |
| /* |
| * Remove any recorded regions beyond |
| * start of variable |
| */ |
| removerecordregions(startloc); |
| goto again; |
| } |
| goto end; |
| } |
| if (easy) |
| goto record; |
| goto end; |
| } |
| |
| if (varlen < 0 && uflag) |
| varunset(p, var, 0, 0); |
| |
| if (subtype == VSLENGTH) { |
| cvtnum(varlen > 0 ? varlen : 0); |
| goto record; |
| } |
| |
| if (subtype == VSNORMAL) { |
| if (easy) |
| goto record; |
| goto end; |
| } |
| |
| #if DEBUG |
| switch (subtype) { |
| case VSTRIMLEFT: |
| case VSTRIMLEFTMAX: |
| case VSTRIMRIGHT: |
| case VSTRIMRIGHTMAX: |
| #if ENABLE_ASH_BASH_COMPAT |
| case VSSUBSTR: |
| case VSREPLACE: |
| case VSREPLACEALL: |
| #endif |
| break; |
| default: |
| abort(); |
| } |
| #endif |
| |
| if (varlen >= 0) { |
| /* |
| * Terminate the string and start recording the pattern |
| * right after it |
| */ |
| STPUTC('\0', expdest); |
| patloc = expdest - (char *)stackblock(); |
| if (0 == subevalvar(p, /* str: */ NULL, patloc, subtype, |
| startloc, varflags, |
| /* quotes: */ flag & (EXP_FULL | EXP_CASE), |
| var_str_list) |
| ) { |
| int amount = expdest - ( |
| (char *)stackblock() + patloc - 1 |
| ); |
| STADJUST(-amount, expdest); |
| } |
| /* Remove any recorded regions beyond start of variable */ |
| removerecordregions(startloc); |
| record: |
| recordregion(startloc, expdest - (char *)stackblock(), quoted); |
| } |
| |
| end: |
| if (subtype != VSNORMAL) { /* skip to end of alternative */ |
| int nesting = 1; |
| for (;;) { |
| char c = *p++; |
| if (c == CTLESC) |
| p++; |
| else if (c == CTLBACKQ || c == (CTLBACKQ|CTLQUOTE)) { |
| if (varlen >= 0) |
| argbackq = argbackq->next; |
| } else if (c == CTLVAR) { |
| if ((*p++ & VSTYPE) != VSNORMAL) |
| nesting++; |
| } else if (c == CTLENDVAR) { |
| if (--nesting == 0) |
| break; |
| } |
| } |
| } |
| return p; |
| } |
| |
| /* |
| * Break the argument string into pieces based upon IFS and add the |
| * strings to the argument list. The regions of the string to be |
| * searched for IFS characters have been stored by recordregion. |
| */ |
| static void |
| ifsbreakup(char *string, struct arglist *arglist) |
| { |
| struct ifsregion *ifsp; |
| struct strlist *sp; |
| char *start; |
| char *p; |
| char *q; |
| const char *ifs, *realifs; |
| int ifsspc; |
| int nulonly; |
| |
| start = string; |
| if (ifslastp != NULL) { |
| ifsspc = 0; |
| nulonly = 0; |
| realifs = ifsset() ? ifsval() : defifs; |
| ifsp = &ifsfirst; |
| do { |
| p = string + ifsp->begoff; |
| nulonly = ifsp->nulonly; |
| ifs = nulonly ? nullstr : realifs; |
| ifsspc = 0; |
| while (p < string + ifsp->endoff) { |
| q = p; |
| if (*p == CTLESC) |
| p++; |
| if (!strchr(ifs, *p)) { |
| p++; |
| continue; |
| } |
| if (!nulonly) |
| ifsspc = (strchr(defifs, *p) != NULL); |
| /* Ignore IFS whitespace at start */ |
| if (q == start && ifsspc) { |
| p++; |
| start = p; |
| continue; |
| } |
| *q = '\0'; |
| sp = stzalloc(sizeof(*sp)); |
| sp->text = start; |
| *arglist->lastp = sp; |
| arglist->lastp = &sp->next; |
| p++; |
| if (!nulonly) { |
| for (;;) { |
| if (p >= string + ifsp->endoff) { |
| break; |
| } |
| q = p; |
| if (*p == CTLESC) |
| p++; |
| if (strchr(ifs, *p) == NULL) { |
| p = q; |
| break; |
| } |
| if (strchr(defifs, *p) == NULL) { |
| if (ifsspc) { |
| p++; |
| ifsspc = 0; |
| } else { |
| p = q; |
| break; |
| } |
| } else |
| p++; |
| } |
| } |
| start = p; |
| } /* while */ |
| ifsp = ifsp->next; |
| } while (ifsp != NULL); |
| if (nulonly) |
| goto add; |
| } |
| |
| if (!*start) |
| return; |
| |
| add: |
| sp = stzalloc(sizeof(*sp)); |
| sp->text = start; |
| *arglist->lastp = sp; |
| arglist->lastp = &sp->next; |
| } |
| |
| static void |
| ifsfree(void) |
| { |
| struct ifsregion *p; |
| |
| INT_OFF; |
| p = ifsfirst.next; |
| do { |
| struct ifsregion *ifsp; |
| ifsp = p->next; |
| free(p); |
| p = ifsp; |
| } while (p); |
| ifslastp = NULL; |
| ifsfirst.next = NULL; |
| INT_ON; |
| } |
| |
| /* |
| * Add a file name to the list. |
| */ |
| static void |
| addfname(const char *name) |
| { |
| struct strlist *sp; |
| |
| sp = stzalloc(sizeof(*sp)); |
| sp->text = ststrdup(name); |
| *exparg.lastp = sp; |
| exparg.lastp = &sp->next; |
| } |
| |
| static char *expdir; |
| |
| /* |
| * Do metacharacter (i.e. *, ?, [...]) expansion. |
| */ |
| static void |
| expmeta(char *enddir, char *name) |
| { |
| char *p; |
| const char *cp; |
| char *start; |
| char *endname; |
| int metaflag; |
| struct stat statb; |
| DIR *dirp; |
| struct dirent *dp; |
| int atend; |
| int matchdot; |
| |
| metaflag = 0; |
| start = name; |
| for (p = name; *p; p++) { |
| if (*p == '*' || *p == '?') |
| metaflag = 1; |
| else if (*p == '[') { |
| char *q = p + 1; |
| if (*q == '!') |
| q++; |
| for (;;) { |
| if (*q == '\\') |
| q++; |
| if (*q == '/' || *q == '\0') |
| break; |
| if (*++q == ']') { |
| metaflag = 1; |
| break; |
| } |
| } |
| } else if (*p == '\\') |
| p++; |
| else if (*p == '/') { |
| if (metaflag) |
| goto out; |
| start = p + 1; |
| } |
| } |
| out: |
| if (metaflag == 0) { /* we've reached the end of the file name */ |
| if (enddir != expdir) |
| metaflag++; |
| p = name; |
| do { |
| if (*p == '\\') |
| p++; |
| *enddir++ = *p; |
| } while (*p++); |
| if (metaflag == 0 || lstat(expdir, &statb) >= 0) |
| addfname(expdir); |
| return; |
| } |
| endname = p; |
| if (name < start) { |
| p = name; |
| do { |
| if (*p == '\\') |
| p++; |
| *enddir++ = *p++; |
| } while (p < start); |
| } |
| if (enddir == expdir) { |
| cp = "."; |
| } else if (enddir == expdir + 1 && *expdir == '/') { |
| cp = "/"; |
| } else { |
| cp = expdir; |
| enddir[-1] = '\0'; |
| } |
| dirp = opendir(cp); |
| if (dirp == NULL) |
| return; |
| if (enddir != expdir) |
| enddir[-1] = '/'; |
| if (*endname == 0) { |
| atend = 1; |
| } else { |
| atend = 0; |
| *endname++ = '\0'; |
| } |
| matchdot = 0; |
| p = start; |
| if (*p == '\\') |
| p++; |
| if (*p == '.') |
| matchdot++; |
| while (!intpending && (dp = readdir(dirp)) != NULL) { |
| if (dp->d_name[0] == '.' && ! matchdot) |
| continue; |
| if (pmatch(start, dp->d_name)) { |
| if (atend) { |
| strcpy(enddir, dp->d_name); |
| addfname(expdir); |
| } else { |
| for (p = enddir, cp = dp->d_name; (*p++ = *cp++) != '\0';) |
| continue; |
| p[-1] = '/'; |
| expmeta(p, endname); |
| } |
| } |
| } |
| closedir(dirp); |
| if (! atend) |
| endname[-1] = '/'; |
| } |
| |
| static struct strlist * |
| msort(struct strlist *list, int len) |
| { |
| struct strlist *p, *q = NULL; |
| struct strlist **lpp; |
| int half; |
| int n; |
| |
| if (len <= 1) |
| return list; |
| half = len >> 1; |
| p = list; |
| for (n = half; --n >= 0;) { |
| q = p; |
| p = p->next; |
| } |
| q->next = NULL; /* terminate first half of list */ |
| q = msort(list, half); /* sort first half of list */ |
| p = msort(p, len - half); /* sort second half */ |
| lpp = &list; |
| for (;;) { |
| #if ENABLE_LOCALE_SUPPORT |
| if (strcoll(p->text, q->text) < 0) |
| #else |
| if (strcmp(p->text, q->text) < 0) |
| #endif |
| { |
| *lpp = p; |
| lpp = &p->next; |
| p = *lpp; |
| if (p == NULL) { |
| *lpp = q; |
| break; |
| } |
| } else { |
| *lpp = q; |
| lpp = &q->next; |
| q = *lpp; |
| if (q == NULL) { |
| *lpp = p; |
| break; |
| } |
| } |
| } |
| return list; |
| } |
| |
| /* |
| * Sort the results of file name expansion. It calculates the number of |
| * strings to sort and then calls msort (short for merge sort) to do the |
| * work. |
| */ |
| static struct strlist * |
| expsort(struct strlist *str) |
| { |
| int len; |
| struct strlist *sp; |
| |
| len = 0; |
| for (sp = str; sp; sp = sp->next) |
| len++; |
| return msort(str, len); |
| } |
| |
| static void |
| expandmeta(struct strlist *str /*, int flag*/) |
| { |
| static const char metachars[] ALIGN1 = { |
| '*', '?', '[', 0 |
| }; |
| /* TODO - EXP_REDIR */ |
| |
| while (str) { |
| struct strlist **savelastp; |
| struct strlist *sp; |
| char *p; |
| |
| if (fflag) |
| goto nometa; |
| if (!strpbrk(str->text, metachars)) |
| goto nometa; |
| savelastp = exparg.lastp; |
| |
| INT_OFF; |
| p = preglob(str->text, 0, RMESCAPE_ALLOC | RMESCAPE_HEAP); |
| { |
| int i = strlen(str->text); |
| expdir = ckmalloc(i < 2048 ? 2048 : i); /* XXX */ |
| } |
| |
| expmeta(expdir, p); |
| free(expdir); |
| if (p != str->text) |
| free(p); |
| INT_ON; |
| if (exparg.lastp == savelastp) { |
| /* |
| * no matches |
| */ |
| nometa: |
| *exparg.lastp = str; |
| rmescapes(str->text); |
| exparg.lastp = &str->next; |
| } else { |
| *exparg.lastp = NULL; |
| *savelastp = sp = expsort(*savelastp); |
| while (sp->next != NULL) |
| sp = sp->next; |
| exparg.lastp = &sp->next; |
| } |
| str = str->next; |
| } |
| } |
| |
| /* |
| * Perform variable substitution and command substitution on an argument, |
| * placing the resulting list of arguments in arglist. If EXP_FULL is true, |
| * perform splitting and file name expansion. When arglist is NULL, perform |
| * here document expansion. |
| */ |
| static void |
| expandarg(union node *arg, struct arglist *arglist, int flag) |
| { |
| struct strlist *sp; |
| char *p; |
| |
| argbackq = arg->narg.backquote; |
| STARTSTACKSTR(expdest); |
| ifsfirst.next = NULL; |
| ifslastp = NULL; |
| argstr(arg->narg.text, flag, |
| /* var_str_list: */ arglist ? arglist->list : NULL); |
| p = _STPUTC('\0', expdest); |
| expdest = p - 1; |
| if (arglist == NULL) { |
| return; /* here document expanded */ |
| } |
| p = grabstackstr(p); |
| exparg.lastp = &exparg.list; |
| /* |
| * TODO - EXP_REDIR |
| */ |
| if (flag & EXP_FULL) { |
| ifsbreakup(p, &exparg); |
| *exparg.lastp = NULL; |
| exparg.lastp = &exparg.list; |
| expandmeta(exparg.list /*, flag*/); |
| } else { |
| if (flag & EXP_REDIR) /*XXX - for now, just remove escapes */ |
| rmescapes(p); |
| sp = stzalloc(sizeof(*sp)); |
| sp->text = p; |
| *exparg.lastp = sp; |
| exparg.lastp = &sp->next; |
| } |
| if (ifsfirst.next) |
| ifsfree(); |
| *exparg.lastp = NULL; |
| if (exparg.list) { |
| *arglist->lastp = exparg.list; |
| arglist->lastp = exparg.lastp; |
| } |
| } |
| |
| /* |
| * Expand shell variables and backquotes inside a here document. |
| */ |
| static void |
| expandhere(union node *arg, int fd) |
| { |
| herefd = fd; |
| expandarg(arg, (struct arglist *)NULL, 0); |
| full_write(fd, stackblock(), expdest - (char *)stackblock()); |
| } |
| |
| /* |
| * Returns true if the pattern matches the string. |
| */ |
| static int |
| patmatch(char *pattern, const char *string) |
| { |
| return pmatch(preglob(pattern, 0, 0), string); |
| } |
| |
| /* |
| * See if a pattern matches in a case statement. |
| */ |
| static int |
| casematch(union node *pattern, char *val) |
| { |
| struct stackmark smark; |
| int result; |
| |
| setstackmark(&smark); |
| argbackq = pattern->narg.backquote; |
| STARTSTACKSTR(expdest); |
| ifslastp = NULL; |
| argstr(pattern->narg.text, EXP_TILDE | EXP_CASE, |
| /* var_str_list: */ NULL); |
| STACKSTRNUL(expdest); |
| result = patmatch(stackblock(), val); |
| popstackmark(&smark); |
| return result; |
| } |
| |
| |
| /* ============ find_command */ |
| |
| struct builtincmd { |
| const char *name; |
| int (*builtin)(int, char **); |
| /* unsigned flags; */ |
| }; |
| #define IS_BUILTIN_SPECIAL(b) ((b)->name[0] & 1) |
| /* "regular" builtins always take precedence over commands, |
| * regardless of PATH=....%builtin... position */ |
| #define IS_BUILTIN_REGULAR(b) ((b)->name[0] & 2) |
| #define IS_BUILTIN_ASSIGN(b) ((b)->name[0] & 4) |
| |
| struct cmdentry { |
| smallint cmdtype; /* CMDxxx */ |
| union param { |
| int index; |
| /* index >= 0 for commands without path (slashes) */ |
| /* (TODO: what exactly does the value mean? PATH position?) */ |
| /* index == -1 for commands with slashes */ |
| /* index == (-2 - applet_no) for NOFORK applets */ |
| const struct builtincmd *cmd; |
| struct funcnode *func; |
| } u; |
| }; |
| /* values of cmdtype */ |
| #define CMDUNKNOWN -1 /* no entry in table for command */ |
| #define CMDNORMAL 0 /* command is an executable program */ |
| #define CMDFUNCTION 1 /* command is a shell function */ |
| #define CMDBUILTIN 2 /* command is a shell builtin */ |
| |
| /* action to find_command() */ |
| #define DO_ERR 0x01 /* prints errors */ |
| #define DO_ABS 0x02 /* checks absolute paths */ |
| #define DO_NOFUNC 0x04 /* don't return shell functions, for command */ |
| #define DO_ALTPATH 0x08 /* using alternate path */ |
| #define DO_ALTBLTIN 0x20 /* %builtin in alt. path */ |
| |
| static void find_command(char *, struct cmdentry *, int, const char *); |
| |
| |
| /* ============ Hashing commands */ |
| |
| /* |
| * When commands are first encountered, they are entered in a hash table. |
| * This ensures that a full path search will not have to be done for them |
| * on each invocation. |
| * |
| * We should investigate converting to a linear search, even though that |
| * would make the command name "hash" a misnomer. |
| */ |
| |
| struct tblentry { |
| struct tblentry *next; /* next entry in hash chain */ |
| union param param; /* definition of builtin function */ |
| smallint cmdtype; /* CMDxxx */ |
| char rehash; /* if set, cd done since entry created */ |
| char cmdname[1]; /* name of command */ |
| }; |
| |
| static struct tblentry **cmdtable; |
| #define INIT_G_cmdtable() do { \ |
| cmdtable = xzalloc(CMDTABLESIZE * sizeof(cmdtable[0])); \ |
| } while (0) |
| |
| static int builtinloc = -1; /* index in path of %builtin, or -1 */ |
| |
| |
| static void |
| tryexec(USE_FEATURE_SH_STANDALONE(int applet_no,) char *cmd, char **argv, char **envp) |
| { |
| int repeated = 0; |
| |
| #if ENABLE_FEATURE_SH_STANDALONE |
| if (applet_no >= 0) { |
| if (APPLET_IS_NOEXEC(applet_no)) |
| run_applet_no_and_exit(applet_no, argv); |
| /* re-exec ourselves with the new arguments */ |
| execve(bb_busybox_exec_path, argv, envp); |
| /* If they called chroot or otherwise made the binary no longer |
| * executable, fall through */ |
| } |
| #endif |
| |
| repeat: |
| #ifdef SYSV |
| do { |
| execve(cmd, argv, envp); |
| } while (errno == EINTR); |
| #else |
| execve(cmd, argv, envp); |
| #endif |
| if (repeated) { |
| free(argv); |
| return; |
| } |
| if (errno == ENOEXEC) { |
| char **ap; |
| char **new; |
| |
| for (ap = argv; *ap; ap++) |
| continue; |
| ap = new = ckmalloc((ap - argv + 2) * sizeof(ap[0])); |
| ap[1] = cmd; |
| ap[0] = cmd = (char *)DEFAULT_SHELL; |
| ap += 2; |
| argv++; |
| while ((*ap++ = *argv++) != NULL) |
| continue; |
| argv = new; |
| repeated++; |
| goto repeat; |
| } |
| } |
| |
| /* |
| * Exec a program. Never returns. If you change this routine, you may |
| * have to change the find_command routine as well. |
| */ |
| static void shellexec(char **, const char *, int) ATTRIBUTE_NORETURN; |
| static void |
| shellexec(char **argv, const char *path, int idx) |
| { |
| char *cmdname; |
| int e; |
| char **envp; |
| int exerrno; |
| #if ENABLE_FEATURE_SH_STANDALONE |
| int applet_no = -1; |
| #endif |
| |
| clearredir(1); |
| envp = listvars(VEXPORT, VUNSET, 0); |
| if (strchr(argv[0], '/') != NULL |
| #if ENABLE_FEATURE_SH_STANDALONE |
| || (applet_no = find_applet_by_name(argv[0])) >= 0 |
| #endif |
| ) { |
| tryexec(USE_FEATURE_SH_STANDALONE(applet_no,) argv[0], argv, envp); |
| e = errno; |
| } else { |
| e = ENOENT; |
| while ((cmdname = padvance(&path, argv[0])) != NULL) { |
| if (--idx < 0 && pathopt == NULL) { |
| tryexec(USE_FEATURE_SH_STANDALONE(-1,) cmdname, argv, envp); |
| if (errno != ENOENT && errno != ENOTDIR) |
| e = errno; |
| } |
| stunalloc(cmdname); |
| } |
| } |
| |
| /* Map to POSIX errors */ |
| switch (e) { |
| case EACCES: |
| exerrno = 126; |
| break; |
| case ENOENT: |
| exerrno = 127; |
| break; |
| default: |
| exerrno = 2; |
| break; |
| } |
| exitstatus = exerrno; |
| TRACE(("shellexec failed for %s, errno %d, suppressint %d\n", |
| argv[0], e, suppressint)); |
| ash_msg_and_raise(EXEXEC, "%s: %s", argv[0], errmsg(e, "not found")); |
| /* NOTREACHED */ |
| } |
| |
| static void |
| printentry(struct tblentry *cmdp) |
| { |
| int idx; |
| const char *path; |
| char *name; |
| |
| idx = cmdp->param.index; |
| path = pathval(); |
| do { |
| name = padvance(&path, cmdp->cmdname); |
| stunalloc(name); |
| } while (--idx >= 0); |
| out1fmt("%s%s\n", name, (cmdp->rehash ? "*" : nullstr)); |
| } |
| |
| /* |
| * Clear out command entries. The argument specifies the first entry in |
| * PATH which has changed. |
| */ |
| static void |
| clearcmdentry(int firstchange) |
| { |
| struct tblentry **tblp; |
| struct tblentry **pp; |
| struct tblentry *cmdp; |
| |
| INT_OFF; |
| for (tblp = cmdtable; tblp < &cmdtable[CMDTABLESIZE]; tblp++) { |
| pp = tblp; |
| while ((cmdp = *pp) != NULL) { |
| if ((cmdp->cmdtype == CMDNORMAL && |
| cmdp->param.index >= firstchange) |
| || (cmdp->cmdtype == CMDBUILTIN && |
| builtinloc >= firstchange) |
| ) { |
| *pp = cmdp->next; |
| free(cmdp); |
| } else { |
| pp = &cmdp->next; |
| } |
| } |
| } |
| INT_ON; |
| } |
| |
| /* |
| * Locate a command in the command hash table. If "add" is nonzero, |
| * add the command to the table if it is not already present. The |
| * variable "lastcmdentry" is set to point to the address of the link |
| * pointing to the entry, so that delete_cmd_entry can delete the |
| * entry. |
| * |
| * Interrupts must be off if called with add != 0. |
| */ |
| static struct tblentry **lastcmdentry; |
| |
| static struct tblentry * |
| cmdlookup(const char *name, int add) |
| { |
| unsigned int hashval; |
| const char *p; |
| struct tblentry *cmdp; |
| struct tblentry **pp; |
| |
| p = name; |
| hashval = (unsigned char)*p << 4; |
| while (*p) |
| hashval += (unsigned char)*p++; |
| hashval &= 0x7FFF; |
| pp = &cmdtable[hashval % CMDTABLESIZE]; |
| for (cmdp = *pp; cmdp; cmdp = cmdp->next) { |
| if (strcmp(cmdp->cmdname, name) == 0) |
| break; |
| pp = &cmdp->next; |
| } |
| if (add && cmdp == NULL) { |
| cmdp = *pp = ckzalloc(sizeof(struct tblentry) |
| + strlen(name) |
| /* + 1 - already done because |
| * tblentry::cmdname is char[1] */); |
| /*cmdp->next = NULL; - ckzalloc did it */ |
| cmdp->cmdtype = CMDUNKNOWN; |
| strcpy(cmdp->cmdname, name); |
| } |
| lastcmdentry = pp; |
| return cmdp; |
| } |
| |
| /* |
| * Delete the command entry returned on the last lookup. |
| */ |
| static void |
| delete_cmd_entry(void) |
| { |
| struct tblentry *cmdp; |
| |
| INT_OFF; |
| cmdp = *lastcmdentry; |
| *lastcmdentry = cmdp->next; |
| if (cmdp->cmdtype == CMDFUNCTION) |
| freefunc(cmdp->param.func); |
| free(cmdp); |
| INT_ON; |
| } |
| |
| /* |
| * Add a new command entry, replacing any existing command entry for |
| * the same name - except special builtins. |
| */ |
| static void |
| addcmdentry(char *name, struct cmdentry *entry) |
| { |
| struct tblentry *cmdp; |
| |
| cmdp = cmdlookup(name, 1); |
| if (cmdp->cmdtype == CMDFUNCTION) { |
| freefunc(cmdp->param.func); |
| } |
| cmdp->cmdtype = entry->cmdtype; |
| cmdp->param = entry->u; |
| cmdp->rehash = 0; |
| } |
| |
| static int |
| hashcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| struct tblentry **pp; |
| struct tblentry *cmdp; |
| int c; |
| struct cmdentry entry; |
| char *name; |
| |
| if (nextopt("r") != '\0') { |
| clearcmdentry(0); |
| return 0; |
| } |
| |
| if (*argptr == NULL) { |
| for (pp = cmdtable; pp < &cmdtable[CMDTABLESIZE]; pp++) { |
| for (cmdp = *pp; cmdp; cmdp = cmdp->next) { |
| if (cmdp->cmdtype == CMDNORMAL) |
| printentry(cmdp); |
| } |
| } |
| return 0; |
| } |
| |
| c = 0; |
| while ((name = *argptr) != NULL) { |
| cmdp = cmdlookup(name, 0); |
| if (cmdp != NULL |
| && (cmdp->cmdtype == CMDNORMAL |
| || (cmdp->cmdtype == CMDBUILTIN && builtinloc >= 0)) |
| ) { |
| delete_cmd_entry(); |
| } |
| find_command(name, &entry, DO_ERR, pathval()); |
| if (entry.cmdtype == CMDUNKNOWN) |
| c = 1; |
| argptr++; |
| } |
| return c; |
| } |
| |
| /* |
| * Called when a cd is done. Marks all commands so the next time they |
| * are executed they will be rehashed. |
| */ |
| static void |
| hashcd(void) |
| { |
| struct tblentry **pp; |
| struct tblentry *cmdp; |
| |
| for (pp = cmdtable; pp < &cmdtable[CMDTABLESIZE]; pp++) { |
| for (cmdp = *pp; cmdp; cmdp = cmdp->next) { |
| if (cmdp->cmdtype == CMDNORMAL |
| || (cmdp->cmdtype == CMDBUILTIN |
| && !IS_BUILTIN_REGULAR(cmdp->param.cmd) |
| && builtinloc > 0) |
| ) { |
| cmdp->rehash = 1; |
| } |
| } |
| } |
| } |
| |
| /* |
| * Fix command hash table when PATH changed. |
| * Called before PATH is changed. The argument is the new value of PATH; |
| * pathval() still returns the old value at this point. |
| * Called with interrupts off. |
| */ |
| static void |
| changepath(const char *new) |
| { |
| const char *old; |
| int firstchange; |
| int idx; |
| int idx_bltin; |
| |
| old = pathval(); |
| firstchange = 9999; /* assume no change */ |
| idx = 0; |
| idx_bltin = -1; |
| for (;;) { |
| if (*old != *new) { |
| firstchange = idx; |
| if ((*old == '\0' && *new == ':') |
| || (*old == ':' && *new == '\0')) |
| firstchange++; |
| old = new; /* ignore subsequent differences */ |
| } |
| if (*new == '\0') |
| break; |
| if (*new == '%' && idx_bltin < 0 && prefix(new + 1, "builtin")) |
| idx_bltin = idx; |
| if (*new == ':') |
| idx++; |
| new++, old++; |
| } |
| if (builtinloc < 0 && idx_bltin >= 0) |
| builtinloc = idx_bltin; /* zap builtins */ |
| if (builtinloc >= 0 && idx_bltin < 0) |
| firstchange = 0; |
| clearcmdentry(firstchange); |
| builtinloc = idx_bltin; |
| } |
| |
| #define TEOF 0 |
| #define TNL 1 |
| #define TREDIR 2 |
| #define TWORD 3 |
| #define TSEMI 4 |
| #define TBACKGND 5 |
| #define TAND 6 |
| #define TOR 7 |
| #define TPIPE 8 |
| #define TLP 9 |
| #define TRP 10 |
| #define TENDCASE 11 |
| #define TENDBQUOTE 12 |
| #define TNOT 13 |
| #define TCASE 14 |
| #define TDO 15 |
| #define TDONE 16 |
| #define TELIF 17 |
| #define TELSE 18 |
| #define TESAC 19 |
| #define TFI 20 |
| #define TFOR 21 |
| #define TIF 22 |
| #define TIN 23 |
| #define TTHEN 24 |
| #define TUNTIL 25 |
| #define TWHILE 26 |
| #define TBEGIN 27 |
| #define TEND 28 |
| typedef smallint token_id_t; |
| |
| /* first char is indicating which tokens mark the end of a list */ |
| static const char *const tokname_array[] = { |
| "\1end of file", |
| "\0newline", |
| "\0redirection", |
| "\0word", |
| "\0;", |
| "\0&", |
| "\0&&", |
| "\0||", |
| "\0|", |
| "\0(", |
| "\1)", |
| "\1;;", |
| "\1`", |
| #define KWDOFFSET 13 |
| /* the following are keywords */ |
| "\0!", |
| "\0case", |
| "\1do", |
| "\1done", |
| "\1elif", |
| "\1else", |
| "\1esac", |
| "\1fi", |
| "\0for", |
| "\0if", |
| "\0in", |
| "\1then", |
| "\0until", |
| "\0while", |
| "\0{", |
| "\1}", |
| }; |
| |
| static const char * |
| tokname(int tok) |
| { |
| static char buf[16]; |
| |
| //try this: |
| //if (tok < TSEMI) return tokname_array[tok] + 1; |
| //sprintf(buf, "\"%s\"", tokname_array[tok] + 1); |
| //return buf; |
| |
| if (tok >= TSEMI) |
| buf[0] = '"'; |
| sprintf(buf + (tok >= TSEMI), "%s%c", |
| tokname_array[tok] + 1, (tok >= TSEMI ? '"' : 0)); |
| return buf; |
| } |
| |
| /* Wrapper around strcmp for qsort/bsearch/... */ |
| static int |
| pstrcmp(const void *a, const void *b) |
| { |
| return strcmp((char*) a, (*(char**) b) + 1); |
| } |
| |
| static const char *const * |
| findkwd(const char *s) |
| { |
| return bsearch(s, tokname_array + KWDOFFSET, |
| ARRAY_SIZE(tokname_array) - KWDOFFSET, |
| sizeof(tokname_array[0]), pstrcmp); |
| } |
| |
| /* |
| * Locate and print what a word is... |
| */ |
| static int |
| describe_command(char *command, int describe_command_verbose) |
| { |
| struct cmdentry entry; |
| struct tblentry *cmdp; |
| #if ENABLE_ASH_ALIAS |
| const struct alias *ap; |
| #endif |
| const char *path = pathval(); |
| |
| if (describe_command_verbose) { |
| out1str(command); |
| } |
| |
| /* First look at the keywords */ |
| if (findkwd(command)) { |
| out1str(describe_command_verbose ? " is a shell keyword" : command); |
| goto out; |
| } |
| |
| #if ENABLE_ASH_ALIAS |
| /* Then look at the aliases */ |
| ap = lookupalias(command, 0); |
| if (ap != NULL) { |
| if (!describe_command_verbose) { |
| out1str("alias "); |
| printalias(ap); |
| return 0; |
| } |
| out1fmt(" is an alias for %s", ap->val); |
| goto out; |
| } |
| #endif |
| /* Then check if it is a tracked alias */ |
| cmdp = cmdlookup(command, 0); |
| if (cmdp != NULL) { |
| entry.cmdtype = cmdp->cmdtype; |
| entry.u = cmdp->param; |
| } else { |
| /* Finally use brute force */ |
| find_command(command, &entry, DO_ABS, path); |
| } |
| |
| switch (entry.cmdtype) { |
| case CMDNORMAL: { |
| int j = entry.u.index; |
| char *p; |
| if (j < 0) { |
| p = command; |
| } else { |
| do { |
| p = padvance(&path, command); |
| stunalloc(p); |
| } while (--j >= 0); |
| } |
| if (describe_command_verbose) { |
| out1fmt(" is%s %s", |
| (cmdp ? " a tracked alias for" : nullstr), p |
| ); |
| } else { |
| out1str(p); |
| } |
| break; |
| } |
| |
| case CMDFUNCTION: |
| if (describe_command_verbose) { |
| out1str(" is a shell function"); |
| } else { |
| out1str(command); |
| } |
| break; |
| |
| case CMDBUILTIN: |
| if (describe_command_verbose) { |
| out1fmt(" is a %sshell builtin", |
| IS_BUILTIN_SPECIAL(entry.u.cmd) ? |
| "special " : nullstr |
| ); |
| } else { |
| out1str(command); |
| } |
| break; |
| |
| default: |
| if (describe_command_verbose) { |
| out1str(": not found\n"); |
| } |
| return 127; |
| } |
| out: |
| outstr("\n", stdout); |
| return 0; |
| } |
| |
| static int |
| typecmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| int i = 1; |
| int err = 0; |
| int verbose = 1; |
| |
| /* type -p ... ? (we don't bother checking for 'p') */ |
| if (argv[1] && argv[1][0] == '-') { |
| i++; |
| verbose = 0; |
| } |
| while (argv[i]) { |
| err |= describe_command(argv[i++], verbose); |
| } |
| return err; |
| } |
| |
| #if ENABLE_ASH_CMDCMD |
| static int |
| commandcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| int c; |
| enum { |
| VERIFY_BRIEF = 1, |
| VERIFY_VERBOSE = 2, |
| } verify = 0; |
| |
| while ((c = nextopt("pvV")) != '\0') |
| if (c == 'V') |
| verify |= VERIFY_VERBOSE; |
| else if (c == 'v') |
| verify |= VERIFY_BRIEF; |
| #if DEBUG |
| else if (c != 'p') |
| abort(); |
| #endif |
| if (verify) |
| return describe_command(*argptr, verify - VERIFY_BRIEF); |
| |
| return 0; |
| } |
| #endif |
| |
| |
| /* ============ eval.c */ |
| |
| static int funcblocksize; /* size of structures in function */ |
| static int funcstringsize; /* size of strings in node */ |
| static void *funcblock; /* block to allocate function from */ |
| static char *funcstring; /* block to allocate strings from */ |
| |
| /* flags in argument to evaltree */ |
| #define EV_EXIT 01 /* exit after evaluating tree */ |
| #define EV_TESTED 02 /* exit status is checked; ignore -e flag */ |
| #define EV_BACKCMD 04 /* command executing within back quotes */ |
| |
| static const short nodesize[26] = { |
| SHELL_ALIGN(sizeof(struct ncmd)), |
| SHELL_ALIGN(sizeof(struct npipe)), |
| SHELL_ALIGN(sizeof(struct nredir)), |
| SHELL_ALIGN(sizeof(struct nredir)), |
| SHELL_ALIGN(sizeof(struct nredir)), |
| SHELL_ALIGN(sizeof(struct nbinary)), |
| SHELL_ALIGN(sizeof(struct nbinary)), |
| SHELL_ALIGN(sizeof(struct nbinary)), |
| SHELL_ALIGN(sizeof(struct nif)), |
| SHELL_ALIGN(sizeof(struct nbinary)), |
| SHELL_ALIGN(sizeof(struct nbinary)), |
| SHELL_ALIGN(sizeof(struct nfor)), |
| SHELL_ALIGN(sizeof(struct ncase)), |
| SHELL_ALIGN(sizeof(struct nclist)), |
| SHELL_ALIGN(sizeof(struct narg)), |
| SHELL_ALIGN(sizeof(struct narg)), |
| SHELL_ALIGN(sizeof(struct nfile)), |
| SHELL_ALIGN(sizeof(struct nfile)), |
| SHELL_ALIGN(sizeof(struct nfile)), |
| SHELL_ALIGN(sizeof(struct nfile)), |
| SHELL_ALIGN(sizeof(struct nfile)), |
| SHELL_ALIGN(sizeof(struct ndup)), |
| SHELL_ALIGN(sizeof(struct ndup)), |
| SHELL_ALIGN(sizeof(struct nhere)), |
| SHELL_ALIGN(sizeof(struct nhere)), |
| SHELL_ALIGN(sizeof(struct nnot)), |
| }; |
| |
| static void calcsize(union node *n); |
| |
| static void |
| sizenodelist(struct nodelist *lp) |
| { |
| while (lp) { |
| funcblocksize += SHELL_ALIGN(sizeof(struct nodelist)); |
| calcsize(lp->n); |
| lp = lp->next; |
| } |
| } |
| |
| static void |
| calcsize(union node *n) |
| { |
| if (n == NULL) |
| return; |
| funcblocksize += nodesize[n->type]; |
| switch (n->type) { |
| case NCMD: |
| calcsize(n->ncmd.redirect); |
| calcsize(n->ncmd.args); |
| calcsize(n->ncmd.assign); |
| break; |
| case NPIPE: |
| sizenodelist(n->npipe.cmdlist); |
| break; |
| case NREDIR: |
| case NBACKGND: |
| case NSUBSHELL: |
| calcsize(n->nredir.redirect); |
| calcsize(n->nredir.n); |
| break; |
| case NAND: |
| case NOR: |
| case NSEMI: |
| case NWHILE: |
| case NUNTIL: |
| calcsize(n->nbinary.ch2); |
| calcsize(n->nbinary.ch1); |
| break; |
| case NIF: |
| calcsize(n->nif.elsepart); |
| calcsize(n->nif.ifpart); |
| calcsize(n->nif.test); |
| break; |
| case NFOR: |
| funcstringsize += strlen(n->nfor.var) + 1; |
| calcsize(n->nfor.body); |
| calcsize(n->nfor.args); |
| break; |
| case NCASE: |
| calcsize(n->ncase.cases); |
| calcsize(n->ncase.expr); |
| break; |
| case NCLIST: |
| calcsize(n->nclist.body); |
| calcsize(n->nclist.pattern); |
| calcsize(n->nclist.next); |
| break; |
| case NDEFUN: |
| case NARG: |
| sizenodelist(n->narg.backquote); |
| funcstringsize += strlen(n->narg.text) + 1; |
| calcsize(n->narg.next); |
| break; |
| case NTO: |
| case NCLOBBER: |
| case NFROM: |
| case NFROMTO: |
| case NAPPEND: |
| calcsize(n->nfile.fname); |
| calcsize(n->nfile.next); |
| break; |
| case NTOFD: |
| case NFROMFD: |
| calcsize(n->ndup.vname); |
| calcsize(n->ndup.next); |
| break; |
| case NHERE: |
| case NXHERE: |
| calcsize(n->nhere.doc); |
| calcsize(n->nhere.next); |
| break; |
| case NNOT: |
| calcsize(n->nnot.com); |
| break; |
| }; |
| } |
| |
| static char * |
| nodeckstrdup(char *s) |
| { |
| char *rtn = funcstring; |
| |
| strcpy(funcstring, s); |
| funcstring += strlen(s) + 1; |
| return rtn; |
| } |
| |
| static union node *copynode(union node *); |
| |
| static struct nodelist * |
| copynodelist(struct nodelist *lp) |
| { |
| struct nodelist *start; |
| struct nodelist **lpp; |
| |
| lpp = &start; |
| while (lp) { |
| *lpp = funcblock; |
| funcblock = (char *) funcblock + SHELL_ALIGN(sizeof(struct nodelist)); |
| (*lpp)->n = copynode(lp->n); |
| lp = lp->next; |
| lpp = &(*lpp)->next; |
| } |
| *lpp = NULL; |
| return start; |
| } |
| |
| static union node * |
| copynode(union node *n) |
| { |
| union node *new; |
| |
| if (n == NULL) |
| return NULL; |
| new = funcblock; |
| funcblock = (char *) funcblock + nodesize[n->type]; |
| |
| switch (n->type) { |
| case NCMD: |
| new->ncmd.redirect = copynode(n->ncmd.redirect); |
| new->ncmd.args = copynode(n->ncmd.args); |
| new->ncmd.assign = copynode(n->ncmd.assign); |
| break; |
| case NPIPE: |
| new->npipe.cmdlist = copynodelist(n->npipe.cmdlist); |
| new->npipe.backgnd = n->npipe.backgnd; |
| break; |
| case NREDIR: |
| case NBACKGND: |
| case NSUBSHELL: |
| new->nredir.redirect = copynode(n->nredir.redirect); |
| new->nredir.n = copynode(n->nredir.n); |
| break; |
| case NAND: |
| case NOR: |
| case NSEMI: |
| case NWHILE: |
| case NUNTIL: |
| new->nbinary.ch2 = copynode(n->nbinary.ch2); |
| new->nbinary.ch1 = copynode(n->nbinary.ch1); |
| break; |
| case NIF: |
| new->nif.elsepart = copynode(n->nif.elsepart); |
| new->nif.ifpart = copynode(n->nif.ifpart); |
| new->nif.test = copynode(n->nif.test); |
| break; |
| case NFOR: |
| new->nfor.var = nodeckstrdup(n->nfor.var); |
| new->nfor.body = copynode(n->nfor.body); |
| new->nfor.args = copynode(n->nfor.args); |
| break; |
| case NCASE: |
| new->ncase.cases = copynode(n->ncase.cases); |
| new->ncase.expr = copynode(n->ncase.expr); |
| break; |
| case NCLIST: |
| new->nclist.body = copynode(n->nclist.body); |
| new->nclist.pattern = copynode(n->nclist.pattern); |
| new->nclist.next = copynode(n->nclist.next); |
| break; |
| case NDEFUN: |
| case NARG: |
| new->narg.backquote = copynodelist(n->narg.backquote); |
| new->narg.text = nodeckstrdup(n->narg.text); |
| new->narg.next = copynode(n->narg.next); |
| break; |
| case NTO: |
| case NCLOBBER: |
| case NFROM: |
| case NFROMTO: |
| case NAPPEND: |
| new->nfile.fname = copynode(n->nfile.fname); |
| new->nfile.fd = n->nfile.fd; |
| new->nfile.next = copynode(n->nfile.next); |
| break; |
| case NTOFD: |
| case NFROMFD: |
| new->ndup.vname = copynode(n->ndup.vname); |
| new->ndup.dupfd = n->ndup.dupfd; |
| new->ndup.fd = n->ndup.fd; |
| new->ndup.next = copynode(n->ndup.next); |
| break; |
| case NHERE: |
| case NXHERE: |
| new->nhere.doc = copynode(n->nhere.doc); |
| new->nhere.fd = n->nhere.fd; |
| new->nhere.next = copynode(n->nhere.next); |
| break; |
| case NNOT: |
| new->nnot.com = copynode(n->nnot.com); |
| break; |
| }; |
| new->type = n->type; |
| return new; |
| } |
| |
| /* |
| * Make a copy of a parse tree. |
| */ |
| static struct funcnode * |
| copyfunc(union node *n) |
| { |
| struct funcnode *f; |
| size_t blocksize; |
| |
| funcblocksize = offsetof(struct funcnode, n); |
| funcstringsize = 0; |
| calcsize(n); |
| blocksize = funcblocksize; |
| f = ckmalloc(blocksize + funcstringsize); |
| funcblock = (char *) f + offsetof(struct funcnode, n); |
| funcstring = (char *) f + blocksize; |
| copynode(n); |
| f->count = 0; |
| return f; |
| } |
| |
| /* |
| * Define a shell function. |
| */ |
| static void |
| defun(char *name, union node *func) |
| { |
| struct cmdentry entry; |
| |
| INT_OFF; |
| entry.cmdtype = CMDFUNCTION; |
| entry.u.func = copyfunc(func); |
| addcmdentry(name, &entry); |
| INT_ON; |
| } |
| |
| static int evalskip; /* set if we are skipping commands */ |
| /* reasons for skipping commands (see comment on breakcmd routine) */ |
| #define SKIPBREAK (1 << 0) |
| #define SKIPCONT (1 << 1) |
| #define SKIPFUNC (1 << 2) |
| #define SKIPFILE (1 << 3) |
| #define SKIPEVAL (1 << 4) |
| static int skipcount; /* number of levels to skip */ |
| static int funcnest; /* depth of function calls */ |
| static int loopnest; /* current loop nesting level */ |
| |
| /* forward decl way out to parsing code - dotrap needs it */ |
| static int evalstring(char *s, int mask); |
| |
| /* |
| * Called to execute a trap. Perhaps we should avoid entering new trap |
| * handlers while we are executing a trap handler. |
| */ |
| static int |
| dotrap(void) |
| { |
| char *p; |
| char *q; |
| int i; |
| int savestatus; |
| int skip; |
| |
| savestatus = exitstatus; |
| pendingsig = 0; |
| xbarrier(); |
| |
| for (i = 0, q = gotsig; i < NSIG - 1; i++, q++) { |
| if (!*q) |
| continue; |
| *q = '\0'; |
| |
| p = trap[i + 1]; |
| if (!p) |
| continue; |
| skip = evalstring(p, SKIPEVAL); |
| exitstatus = savestatus; |
| if (skip) |
| return skip; |
| } |
| |
| return 0; |
| } |
| |
| /* forward declarations - evaluation is fairly recursive business... */ |
| static void evalloop(union node *, int); |
| static void evalfor(union node *, int); |
| static void evalcase(union node *, int); |
| static void evalsubshell(union node *, int); |
| static void expredir(union node *); |
| static void evalpipe(union node *, int); |
| static void evalcommand(union node *, int); |
| static int evalbltin(const struct builtincmd *, int, char **); |
| static void prehash(union node *); |
| |
| /* |
| * Evaluate a parse tree. The value is left in the global variable |
| * exitstatus. |
| */ |
| static void |
| evaltree(union node *n, int flags) |
| { |
| int checkexit = 0; |
| void (*evalfn)(union node *, int); |
| unsigned isor; |
| int status; |
| if (n == NULL) { |
| TRACE(("evaltree(NULL) called\n")); |
| goto out; |
| } |
| TRACE(("pid %d, evaltree(%p: %d, %d) called\n", |
| getpid(), n, n->type, flags)); |
| switch (n->type) { |
| default: |
| #if DEBUG |
| out1fmt("Node type = %d\n", n->type); |
| fflush(stdout); |
| break; |
| #endif |
| case NNOT: |
| evaltree(n->nnot.com, EV_TESTED); |
| status = !exitstatus; |
| goto setstatus; |
| case NREDIR: |
| expredir(n->nredir.redirect); |
| status = redirectsafe(n->nredir.redirect, REDIR_PUSH); |
| if (!status) { |
| evaltree(n->nredir.n, flags & EV_TESTED); |
| status = exitstatus; |
| } |
| popredir(0); |
| goto setstatus; |
| case NCMD: |
| evalfn = evalcommand; |
| checkexit: |
| if (eflag && !(flags & EV_TESTED)) |
| checkexit = ~0; |
| goto calleval; |
| case NFOR: |
| evalfn = evalfor; |
| goto calleval; |
| case NWHILE: |
| case NUNTIL: |
| evalfn = evalloop; |
| goto calleval; |
| case NSUBSHELL: |
| case NBACKGND: |
| evalfn = evalsubshell; |
| goto calleval; |
| case NPIPE: |
| evalfn = evalpipe; |
| goto checkexit; |
| case NCASE: |
| evalfn = evalcase; |
| goto calleval; |
| case NAND: |
| case NOR: |
| case NSEMI: |
| #if NAND + 1 != NOR |
| #error NAND + 1 != NOR |
| #endif |
| #if NOR + 1 != NSEMI |
| #error NOR + 1 != NSEMI |
| #endif |
| isor = n->type - NAND; |
| evaltree( |
| n->nbinary.ch1, |
| (flags | ((isor >> 1) - 1)) & EV_TESTED |
| ); |
| if (!exitstatus == isor) |
| break; |
| if (!evalskip) { |
| n = n->nbinary.ch2; |
| evaln: |
| evalfn = evaltree; |
| calleval: |
| evalfn(n, flags); |
| break; |
| } |
| break; |
| case NIF: |
| evaltree(n->nif.test, EV_TESTED); |
| if (evalskip) |
| break; |
| if (exitstatus == 0) { |
| n = n->nif.ifpart; |
| goto evaln; |
| } else if (n->nif.elsepart) { |
| n = n->nif.elsepart; |
| goto evaln; |
| } |
| goto success; |
| case NDEFUN: |
| defun(n->narg.text, n->narg.next); |
| success: |
| status = 0; |
| setstatus: |
| exitstatus = status; |
| break; |
| } |
| out: |
| if ((checkexit & exitstatus)) |
| evalskip |= SKIPEVAL; |
| else if (pendingsig && dotrap()) |
| goto exexit; |
| |
| if (flags & EV_EXIT) { |
| exexit: |
| raise_exception(EXEXIT); |
| } |
| } |
| |
| #if !defined(__alpha__) || (defined(__GNUC__) && __GNUC__ >= 3) |
| static |
| #endif |
| void evaltreenr(union node *, int) __attribute__ ((alias("evaltree"),__noreturn__)); |
| |
| static void |
| evalloop(union node *n, int flags) |
| { |
| int status; |
| |
| loopnest++; |
| status = 0; |
| flags &= EV_TESTED; |
| for (;;) { |
| int i; |
| |
| evaltree(n->nbinary.ch1, EV_TESTED); |
| if (evalskip) { |
| skipping: |
| if (evalskip == SKIPCONT && --skipcount <= 0) { |
| evalskip = 0; |
| continue; |
| } |
| if (evalskip == SKIPBREAK && --skipcount <= 0) |
| evalskip = 0; |
| break; |
| } |
| i = exitstatus; |
| if (n->type != NWHILE) |
| i = !i; |
| if (i != 0) |
| break; |
| evaltree(n->nbinary.ch2, flags); |
| status = exitstatus; |
| if (evalskip) |
| goto skipping; |
| } |
| loopnest--; |
| exitstatus = status; |
| } |
| |
| static void |
| evalfor(union node *n, int flags) |
| { |
| struct arglist arglist; |
| union node *argp; |
| struct strlist *sp; |
| struct stackmark smark; |
| |
| setstackmark(&smark); |
| arglist.list = NULL; |
| arglist.lastp = &arglist.list; |
| for (argp = n->nfor.args; argp; argp = argp->narg.next) { |
| expandarg(argp, &arglist, EXP_FULL | EXP_TILDE | EXP_RECORD); |
| /* XXX */ |
| if (evalskip) |
| goto out; |
| } |
| *arglist.lastp = NULL; |
| |
| exitstatus = 0; |
| loopnest++; |
| flags &= EV_TESTED; |
| for (sp = arglist.list; sp; sp = sp->next) { |
| setvar(n->nfor.var, sp->text, 0); |
| evaltree(n->nfor.body, flags); |
| if (evalskip) { |
| if (evalskip == SKIPCONT && --skipcount <= 0) { |
| evalskip = 0; |
| continue; |
| } |
| if (evalskip == SKIPBREAK && --skipcount <= 0) |
| evalskip = 0; |
| break; |
| } |
| } |
| loopnest--; |
| out: |
| popstackmark(&smark); |
| } |
| |
| static void |
| evalcase(union node *n, int flags) |
| { |
| union node *cp; |
| union node *patp; |
| struct arglist arglist; |
| struct stackmark smark; |
| |
| setstackmark(&smark); |
| arglist.list = NULL; |
| arglist.lastp = &arglist.list; |
| expandarg(n->ncase.expr, &arglist, EXP_TILDE); |
| exitstatus = 0; |
| for (cp = n->ncase.cases; cp && evalskip == 0; cp = cp->nclist.next) { |
| for (patp = cp->nclist.pattern; patp; patp = patp->narg.next) { |
| if (casematch(patp, arglist.list->text)) { |
| if (evalskip == 0) { |
| evaltree(cp->nclist.body, flags); |
| } |
| goto out; |
| } |
| } |
| } |
| out: |
| popstackmark(&smark); |
| } |
| |
| /* |
| * Kick off a subshell to evaluate a tree. |
| */ |
| static void |
| evalsubshell(union node *n, int flags) |
| { |
| struct job *jp; |
| int backgnd = (n->type == NBACKGND); |
| int status; |
| |
| expredir(n->nredir.redirect); |
| if (!backgnd && flags & EV_EXIT && !trap[0]) |
| goto nofork; |
| INT_OFF; |
| jp = makejob(/*n,*/ 1); |
| if (forkshell(jp, n, backgnd) == 0) { |
| INT_ON; |
| flags |= EV_EXIT; |
| if (backgnd) |
| flags &=~ EV_TESTED; |
| nofork: |
| redirect(n->nredir.redirect, 0); |
| evaltreenr(n->nredir.n, flags); |
| /* never returns */ |
| } |
| status = 0; |
| if (! backgnd) |
| status = waitforjob(jp); |
| exitstatus = status; |
| INT_ON; |
| } |
| |
| /* |
| * Compute the names of the files in a redirection list. |
| */ |
| static void fixredir(union node *, const char *, int); |
| static void |
| expredir(union node *n) |
| { |
| union node *redir; |
| |
| for (redir = n; redir; redir = redir->nfile.next) { |
| struct arglist fn; |
| |
| fn.list = NULL; |
| fn.lastp = &fn.list; |
| switch (redir->type) { |
| case NFROMTO: |
| case NFROM: |
| case NTO: |
| case NCLOBBER: |
| case NAPPEND: |
| expandarg(redir->nfile.fname, &fn, EXP_TILDE | EXP_REDIR); |
| redir->nfile.expfname = fn.list->text; |
| break; |
| case NFROMFD: |
| case NTOFD: |
| if (redir->ndup.vname) { |
| expandarg(redir->ndup.vname, &fn, EXP_FULL | EXP_TILDE); |
| if (fn.list == NULL) |
| ash_msg_and_raise_error("redir error"); |
| fixredir(redir, fn.list->text, 1); |
| } |
| break; |
| } |
| } |
| } |
| |
| /* |
| * Evaluate a pipeline. All the processes in the pipeline are children |
| * of the process creating the pipeline. (This differs from some versions |
| * of the shell, which make the last process in a pipeline the parent |
| * of all the rest.) |
| */ |
| static void |
| evalpipe(union node *n, int flags) |
| { |
| struct job *jp; |
| struct nodelist *lp; |
| int pipelen; |
| int prevfd; |
| int pip[2]; |
| |
| TRACE(("evalpipe(0x%lx) called\n", (long)n)); |
| pipelen = 0; |
| for (lp = n->npipe.cmdlist; lp; lp = lp->next) |
| pipelen++; |
| flags |= EV_EXIT; |
| INT_OFF; |
| jp = makejob(/*n,*/ pipelen); |
| prevfd = -1; |
| for (lp = n->npipe.cmdlist; lp; lp = lp->next) { |
| prehash(lp->n); |
| pip[1] = -1; |
| if (lp->next) { |
| if (pipe(pip) < 0) { |
| close(prevfd); |
| ash_msg_and_raise_error("pipe call failed"); |
| } |
| } |
| if (forkshell(jp, lp->n, n->npipe.backgnd) == 0) { |
| INT_ON; |
| if (pip[1] >= 0) { |
| close(pip[0]); |
| } |
| if (prevfd > 0) { |
| dup2(prevfd, 0); |
| close(prevfd); |
| } |
| if (pip[1] > 1) { |
| dup2(pip[1], 1); |
| close(pip[1]); |
| } |
| evaltreenr(lp->n, flags); |
| /* never returns */ |
| } |
| if (prevfd >= 0) |
| close(prevfd); |
| prevfd = pip[0]; |
| close(pip[1]); |
| } |
| if (n->npipe.backgnd == 0) { |
| exitstatus = waitforjob(jp); |
| TRACE(("evalpipe: job done exit status %d\n", exitstatus)); |
| } |
| INT_ON; |
| } |
| |
| /* |
| * Controls whether the shell is interactive or not. |
| */ |
| static void |
| setinteractive(int on) |
| { |
| static smallint is_interactive; |
| |
| if (++on == is_interactive) |
| return; |
| is_interactive = on; |
| setsignal(SIGINT); |
| setsignal(SIGQUIT); |
| setsignal(SIGTERM); |
| #if !ENABLE_FEATURE_SH_EXTRA_QUIET |
| if (is_interactive > 1) { |
| /* Looks like they want an interactive shell */ |
| static smallint did_banner; |
| |
| if (!did_banner) { |
| out1fmt( |
| "\n\n" |
| "%s built-in shell (ash)\n" |
| "Enter 'help' for a list of built-in commands." |
| "\n\n", |
| bb_banner); |
| did_banner = 1; |
| } |
| } |
| #endif |
| } |
| |
| static void |
| optschanged(void) |
| { |
| #if DEBUG |
| opentrace(); |
| #endif |
| setinteractive(iflag); |
| setjobctl(mflag); |
| #if ENABLE_FEATURE_EDITING_VI |
| if (viflag) |
| line_input_state->flags |= VI_MODE; |
| else |
| line_input_state->flags &= ~VI_MODE; |
| #else |
| viflag = 0; /* forcibly keep the option off */ |
| #endif |
| } |
| |
| static struct localvar *localvars; |
| |
| /* |
| * Called after a function returns. |
| * Interrupts must be off. |
| */ |
| static void |
| poplocalvars(void) |
| { |
| struct localvar *lvp; |
| struct var *vp; |
| |
| while ((lvp = localvars) != NULL) { |
| localvars = lvp->next; |
| vp = lvp->vp; |
| TRACE(("poplocalvar %s", vp ? vp->text : "-")); |
| if (vp == NULL) { /* $- saved */ |
| memcpy(optlist, lvp->text, sizeof(optlist)); |
| free((char*)lvp->text); |
| optschanged(); |
| } else if ((lvp->flags & (VUNSET|VSTRFIXED)) == VUNSET) { |
| unsetvar(vp->text); |
| } else { |
| if (vp->func) |
| (*vp->func)(strchrnul(lvp->text, '=') + 1); |
| if ((vp->flags & (VTEXTFIXED|VSTACK)) == 0) |
| free((char*)vp->text); |
| vp->flags = lvp->flags; |
| vp->text = lvp->text; |
| } |
| free(lvp); |
| } |
| } |
| |
| static int |
| evalfun(struct funcnode *func, int argc, char **argv, int flags) |
| { |
| volatile struct shparam saveparam; |
| struct localvar *volatile savelocalvars; |
| struct jmploc *volatile savehandler; |
| struct jmploc jmploc; |
| int e; |
| |
| saveparam = shellparam; |
| savelocalvars = localvars; |
| e = setjmp(jmploc.loc); |
| if (e) { |
| goto funcdone; |
| } |
| INT_OFF; |
| savehandler = exception_handler; |
| exception_handler = &jmploc; |
| localvars = NULL; |
| shellparam.malloced = 0; |
| func->count++; |
| funcnest++; |
| INT_ON; |
| shellparam.nparam = argc - 1; |
| shellparam.p = argv + 1; |
| #if ENABLE_ASH_GETOPTS |
| shellparam.optind = 1; |
| shellparam.optoff = -1; |
| #endif |
| evaltree(&func->n, flags & EV_TESTED); |
| funcdone: |
| INT_OFF; |
| funcnest--; |
| freefunc(func); |
| poplocalvars(); |
| localvars = savelocalvars; |
| freeparam(&shellparam); |
| shellparam = saveparam; |
| exception_handler = savehandler; |
| INT_ON; |
| evalskip &= ~SKIPFUNC; |
| return e; |
| } |
| |
| #if ENABLE_ASH_CMDCMD |
| static char ** |
| parse_command_args(char **argv, const char **path) |
| { |
| char *cp, c; |
| |
| for (;;) { |
| cp = *++argv; |
| if (!cp) |
| return 0; |
| if (*cp++ != '-') |
| break; |
| c = *cp++; |
| if (!c) |
| break; |
| if (c == '-' && !*cp) { |
| argv++; |
| break; |
| } |
| do { |
| switch (c) { |
| case 'p': |
| *path = bb_default_path; |
| break; |
| default: |
| /* run 'typecmd' for other options */ |
| return 0; |
| } |
| c = *cp++; |
| } while (c); |
| } |
| return argv; |
| } |
| #endif |
| |
| /* |
| * Make a variable a local variable. When a variable is made local, it's |
| * value and flags are saved in a localvar structure. The saved values |
| * will be restored when the shell function returns. We handle the name |
| * "-" as a special case. |
| */ |
| static void |
| mklocal(char *name) |
| { |
| struct localvar *lvp; |
| struct var **vpp; |
| struct var *vp; |
| |
| INT_OFF; |
| lvp = ckzalloc(sizeof(struct localvar)); |
| if (LONE_DASH(name)) { |
| char *p; |
| p = ckmalloc(sizeof(optlist)); |
| lvp->text = memcpy(p, optlist, sizeof(optlist)); |
| vp = NULL; |
| } else { |
| char *eq; |
| |
| vpp = hashvar(name); |
| vp = *findvar(vpp, name); |
| eq = strchr(name, '='); |
| if (vp == NULL) { |
| if (eq) |
| setvareq(name, VSTRFIXED); |
| else |
| setvar(name, NULL, VSTRFIXED); |
| vp = *vpp; /* the new variable */ |
| lvp->flags = VUNSET; |
| } else { |
| lvp->text = vp->text; |
| lvp->flags = vp->flags; |
| vp->flags |= VSTRFIXED|VTEXTFIXED; |
| if (eq) |
| setvareq(name, 0); |
| } |
| } |
| lvp->vp = vp; |
| lvp->next = localvars; |
| localvars = lvp; |
| INT_ON; |
| } |
| |
| /* |
| * The "local" command. |
| */ |
| static int |
| localcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| char *name; |
| |
| argv = argptr; |
| while ((name = *argv++) != NULL) { |
| mklocal(name); |
| } |
| return 0; |
| } |
| |
| static int |
| falsecmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| return 1; |
| } |
| |
| static int |
| truecmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| return 0; |
| } |
| |
| static int |
| execcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| if (argv[1]) { |
| iflag = 0; /* exit on error */ |
| mflag = 0; |
| optschanged(); |
| shellexec(argv + 1, pathval(), 0); |
| } |
| return 0; |
| } |
| |
| /* |
| * The return command. |
| */ |
| static int |
| returncmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| /* |
| * If called outside a function, do what ksh does; |
| * skip the rest of the file. |
| */ |
| evalskip = funcnest ? SKIPFUNC : SKIPFILE; |
| return argv[1] ? number(argv[1]) : exitstatus; |
| } |
| |
| /* Forward declarations for builtintab[] */ |
| static int breakcmd(int, char **); |
| static int dotcmd(int, char **); |
| static int evalcmd(int, char **); |
| static int exitcmd(int, char **); |
| static int exportcmd(int, char **); |
| #if ENABLE_ASH_GETOPTS |
| static int getoptscmd(int, char **); |
| #endif |
| #if !ENABLE_FEATURE_SH_EXTRA_QUIET |
| static int helpcmd(int, char **); |
| #endif |
| #if ENABLE_ASH_MATH_SUPPORT |
| static int letcmd(int, char **); |
| #endif |
| static int readcmd(int, char **); |
| static int setcmd(int, char **); |
| static int shiftcmd(int, char **); |
| static int timescmd(int, char **); |
| static int trapcmd(int, char **); |
| static int umaskcmd(int, char **); |
| static int unsetcmd(int, char **); |
| static int ulimitcmd(int, char **); |
| |
| #define BUILTIN_NOSPEC "0" |
| #define BUILTIN_SPECIAL "1" |
| #define BUILTIN_REGULAR "2" |
| #define BUILTIN_SPEC_REG "3" |
| #define BUILTIN_ASSIGN "4" |
| #define BUILTIN_SPEC_ASSG "5" |
| #define BUILTIN_REG_ASSG "6" |
| #define BUILTIN_SPEC_REG_ASSG "7" |
| |
| /* We do not handle [[ expr ]] bashism bash-compatibly, |
| * we make it a synonym of [ expr ]. |
| * Basically, word splitting and pathname expansion should NOT be performed |
| * Examples: |
| * no word splitting: a="a b"; [[ $a = "a b" ]]; echo $? should print "0" |
| * no pathname expansion: [[ /bin/m* = "/bin/m*" ]]; echo $? should print "0" |
| * Additional operators: |
| * || and && should work as -o and -a |
| * =~ regexp match |
| * Apart from the above, [[ expr ]] should work as [ expr ] |
| */ |
| |
| #define echocmd echo_main |
| #define printfcmd printf_main |
| #define testcmd test_main |
| |
| /* Keep these in proper order since it is searched via bsearch() */ |
| static const struct builtincmd builtintab[] = { |
| { BUILTIN_SPEC_REG ".", dotcmd }, |
| { BUILTIN_SPEC_REG ":", truecmd }, |
| #if ENABLE_ASH_BUILTIN_TEST |
| { BUILTIN_REGULAR "[", testcmd }, |
| #if ENABLE_ASH_BASH_COMPAT |
| { BUILTIN_REGULAR "[[", testcmd }, |
| #endif |
| #endif |
| #if ENABLE_ASH_ALIAS |
| { BUILTIN_REG_ASSG "alias", aliascmd }, |
| #endif |
| #if JOBS |
| { BUILTIN_REGULAR "bg", fg_bgcmd }, |
| #endif |
| { BUILTIN_SPEC_REG "break", breakcmd }, |
| { BUILTIN_REGULAR "cd", cdcmd }, |
| { BUILTIN_NOSPEC "chdir", cdcmd }, |
| #if ENABLE_ASH_CMDCMD |
| { BUILTIN_REGULAR "command", commandcmd }, |
| #endif |
| { BUILTIN_SPEC_REG "continue", breakcmd }, |
| #if ENABLE_ASH_BUILTIN_ECHO |
| { BUILTIN_REGULAR "echo", echocmd }, |
| #endif |
| { BUILTIN_SPEC_REG "eval", evalcmd }, |
| { BUILTIN_SPEC_REG "exec", execcmd }, |
| { BUILTIN_SPEC_REG "exit", exitcmd }, |
| { BUILTIN_SPEC_REG_ASSG "export", exportcmd }, |
| { BUILTIN_REGULAR "false", falsecmd }, |
| #if JOBS |
| { BUILTIN_REGULAR "fg", fg_bgcmd }, |
| #endif |
| #if ENABLE_ASH_GETOPTS |
| { BUILTIN_REGULAR "getopts", getoptscmd }, |
| #endif |
| { BUILTIN_NOSPEC "hash", hashcmd }, |
| #if !ENABLE_FEATURE_SH_EXTRA_QUIET |
| { BUILTIN_NOSPEC "help", helpcmd }, |
| #endif |
| #if JOBS |
| { BUILTIN_REGULAR "jobs", jobscmd }, |
| { BUILTIN_REGULAR "kill", killcmd }, |
| #endif |
| #if ENABLE_ASH_MATH_SUPPORT |
| { BUILTIN_NOSPEC "let", letcmd }, |
| #endif |
| { BUILTIN_ASSIGN "local", localcmd }, |
| #if ENABLE_ASH_BUILTIN_PRINTF |
| { BUILTIN_REGULAR "printf", printfcmd }, |
| #endif |
| { BUILTIN_NOSPEC "pwd", pwdcmd }, |
| { BUILTIN_REGULAR "read", readcmd }, |
| { BUILTIN_SPEC_REG_ASSG "readonly", exportcmd }, |
| { BUILTIN_SPEC_REG "return", returncmd }, |
| { BUILTIN_SPEC_REG "set", setcmd }, |
| { BUILTIN_SPEC_REG "shift", shiftcmd }, |
| { BUILTIN_SPEC_REG "source", dotcmd }, |
| #if ENABLE_ASH_BUILTIN_TEST |
| { BUILTIN_REGULAR "test", testcmd }, |
| #endif |
| { BUILTIN_SPEC_REG "times", timescmd }, |
| { BUILTIN_SPEC_REG "trap", trapcmd }, |
| { BUILTIN_REGULAR "true", truecmd }, |
| { BUILTIN_NOSPEC "type", typecmd }, |
| { BUILTIN_NOSPEC "ulimit", ulimitcmd }, |
| { BUILTIN_REGULAR "umask", umaskcmd }, |
| #if ENABLE_ASH_ALIAS |
| { BUILTIN_REGULAR "unalias", unaliascmd }, |
| #endif |
| { BUILTIN_SPEC_REG "unset", unsetcmd }, |
| { BUILTIN_REGULAR "wait", waitcmd }, |
| }; |
| |
| /* Should match the above table! */ |
| #define COMMANDCMD (builtintab + \ |
| 2 + \ |
| 1 * ENABLE_ASH_BUILTIN_TEST + \ |
| 1 * ENABLE_ASH_BUILTIN_TEST * ENABLE_ASH_BASH_COMPAT + \ |
| 1 * ENABLE_ASH_ALIAS + \ |
| 1 * ENABLE_ASH_JOB_CONTROL + \ |
| 3) |
| #define EXECCMD (builtintab + \ |
| 2 + \ |
| 1 * ENABLE_ASH_BUILTIN_TEST + \ |
| 1 * ENABLE_ASH_BUILTIN_TEST * ENABLE_ASH_BASH_COMPAT + \ |
| 1 * ENABLE_ASH_ALIAS + \ |
| 1 * ENABLE_ASH_JOB_CONTROL + \ |
| 3 + \ |
| 1 * ENABLE_ASH_CMDCMD + \ |
| 1 + \ |
| ENABLE_ASH_BUILTIN_ECHO + \ |
| 1) |
| |
| /* |
| * Search the table of builtin commands. |
| */ |
| static struct builtincmd * |
| find_builtin(const char *name) |
| { |
| struct builtincmd *bp; |
| |
| bp = bsearch( |
| name, builtintab, ARRAY_SIZE(builtintab), sizeof(builtintab[0]), |
| pstrcmp |
| ); |
| return bp; |
| } |
| |
| /* |
| * Execute a simple command. |
| */ |
| static int |
| isassignment(const char *p) |
| { |
| const char *q = endofname(p); |
| if (p == q) |
| return 0; |
| return *q == '='; |
| } |
| static int |
| bltincmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| /* Preserve exitstatus of a previous possible redirection |
| * as POSIX mandates */ |
| return back_exitstatus; |
| } |
| static void |
| evalcommand(union node *cmd, int flags) |
| { |
| static const struct builtincmd null_bltin = { |
| "\0\0", bltincmd /* why three NULs? */ |
| }; |
| struct stackmark smark; |
| union node *argp; |
| struct arglist arglist; |
| struct arglist varlist; |
| char **argv; |
| int argc; |
| const struct strlist *sp; |
| struct cmdentry cmdentry; |
| struct job *jp; |
| char *lastarg; |
| const char *path; |
| int spclbltin; |
| int cmd_is_exec; |
| int status; |
| char **nargv; |
| struct builtincmd *bcmd; |
| int pseudovarflag = 0; |
| |
| /* First expand the arguments. */ |
| TRACE(("evalcommand(0x%lx, %d) called\n", (long)cmd, flags)); |
| setstackmark(&smark); |
| back_exitstatus = 0; |
| |
| cmdentry.cmdtype = CMDBUILTIN; |
| cmdentry.u.cmd = &null_bltin; |
| varlist.lastp = &varlist.list; |
| *varlist.lastp = NULL; |
| arglist.lastp = &arglist.list; |
| *arglist.lastp = NULL; |
| |
| argc = 0; |
| if (cmd->ncmd.args) { |
| bcmd = find_builtin(cmd->ncmd.args->narg.text); |
| pseudovarflag = bcmd && IS_BUILTIN_ASSIGN(bcmd); |
| } |
| |
| for (argp = cmd->ncmd.args; argp; argp = argp->narg.next) { |
| struct strlist **spp; |
| |
| spp = arglist.lastp; |
| if (pseudovarflag && isassignment(argp->narg.text)) |
| expandarg(argp, &arglist, EXP_VARTILDE); |
| else |
| expandarg(argp, &arglist, EXP_FULL | EXP_TILDE); |
| |
| for (sp = *spp; sp; sp = sp->next) |
| argc++; |
| } |
| |
| argv = nargv = stalloc(sizeof(char *) * (argc + 1)); |
| for (sp = arglist.list; sp; sp = sp->next) { |
| TRACE(("evalcommand arg: %s\n", sp->text)); |
| *nargv++ = sp->text; |
| } |
| *nargv = NULL; |
| |
| lastarg = NULL; |
| if (iflag && funcnest == 0 && argc > 0) |
| lastarg = nargv[-1]; |
| |
| preverrout_fd = 2; |
| expredir(cmd->ncmd.redirect); |
| status = redirectsafe(cmd->ncmd.redirect, REDIR_PUSH | REDIR_SAVEFD2); |
| |
| path = vpath.text; |
| for (argp = cmd->ncmd.assign; argp; argp = argp->narg.next) { |
| struct strlist **spp; |
| char *p; |
| |
| spp = varlist.lastp; |
| expandarg(argp, &varlist, EXP_VARTILDE); |
| |
| /* |
| * Modify the command lookup path, if a PATH= assignment |
| * is present |
| */ |
| p = (*spp)->text; |
| if (varequal(p, path)) |
| path = p; |
| } |
| |
| /* Print the command if xflag is set. */ |
| if (xflag) { |
| int n; |
| const char *p = " %s"; |
| |
| p++; |
| fdprintf(preverrout_fd, p, expandstr(ps4val())); |
| |
| sp = varlist.list; |
| for (n = 0; n < 2; n++) { |
| while (sp) { |
| fdprintf(preverrout_fd, p, sp->text); |
| sp = sp->next; |
| if (*p == '%') { |
| p--; |
| } |
| } |
| sp = arglist.list; |
| } |
| safe_write(preverrout_fd, "\n", 1); |
| } |
| |
| cmd_is_exec = 0; |
| spclbltin = -1; |
| |
| /* Now locate the command. */ |
| if (argc) { |
| const char *oldpath; |
| int cmd_flag = DO_ERR; |
| |
| path += 5; |
| oldpath = path; |
| for (;;) { |
| find_command(argv[0], &cmdentry, cmd_flag, path); |
| if (cmdentry.cmdtype == CMDUNKNOWN) { |
| status = 127; |
| flush_stderr(); |
| goto bail; |
| } |
| |
| /* implement bltin and command here */ |
| if (cmdentry.cmdtype != CMDBUILTIN) |
| break; |
| if (spclbltin < 0) |
| spclbltin = IS_BUILTIN_SPECIAL(cmdentry.u.cmd); |
| if (cmdentry.u.cmd == EXECCMD) |
| cmd_is_exec++; |
| #if ENABLE_ASH_CMDCMD |
| if (cmdentry.u.cmd == COMMANDCMD) { |
| path = oldpath; |
| nargv = parse_command_args(argv, &path); |
| if (!nargv) |
| break; |
| argc -= nargv - argv; |
| argv = nargv; |
| cmd_flag |= DO_NOFUNC; |
| } else |
| #endif |
| break; |
| } |
| } |
| |
| if (status) { |
| /* We have a redirection error. */ |
| if (spclbltin > 0) |
| raise_exception(EXERROR); |
| bail: |
| exitstatus = status; |
| goto out; |
| } |
| |
| /* Execute the command. */ |
| switch (cmdentry.cmdtype) { |
| default: |
| #if ENABLE_FEATURE_SH_NOFORK |
| { |
| /* find_command() encodes applet_no as (-2 - applet_no) */ |
| int applet_no = (- cmdentry.u.index - 2); |
| if (applet_no >= 0 && APPLET_IS_NOFORK(applet_no)) { |
| listsetvar(varlist.list, VEXPORT|VSTACK); |
| /* run <applet>_main() */ |
| exitstatus = run_nofork_applet(applet_no, argv); |
| break; |
| } |
| } |
| #endif |
| |
| /* Fork off a child process if necessary. */ |
| if (!(flags & EV_EXIT) || trap[0]) { |
| INT_OFF; |
| jp = makejob(/*cmd,*/ 1); |
| if (forkshell(jp, cmd, FORK_FG) != 0) { |
| exitstatus = waitforjob(jp); |
| INT_ON; |
| break; |
| } |
| FORCE_INT_ON; |
| } |
| listsetvar(varlist.list, VEXPORT|VSTACK); |
| shellexec(argv, path, cmdentry.u.index); |
| /* NOTREACHED */ |
| |
| case CMDBUILTIN: |
| cmdenviron = varlist.list; |
| if (cmdenviron) { |
| struct strlist *list = cmdenviron; |
| int i = VNOSET; |
| if (spclbltin > 0 || argc == 0) { |
| i = 0; |
| if (cmd_is_exec && argc > 1) |
| i = VEXPORT; |
| } |
| listsetvar(list, i); |
| } |
| if (evalbltin(cmdentry.u.cmd, argc, argv)) { |
| int exit_status; |
| int i = exception; |
| if (i == EXEXIT) |
| goto raise; |
| exit_status = 2; |
| if (i == EXINT) |
| exit_status = 128 + SIGINT; |
| if (i == EXSIG) |
| exit_status = 128 + pendingsig; |
| exitstatus = exit_status; |
| if (i == EXINT || spclbltin > 0) { |
| raise: |
| longjmp(exception_handler->loc, 1); |
| } |
| FORCE_INT_ON; |
| } |
| break; |
| |
| case CMDFUNCTION: |
| listsetvar(varlist.list, 0); |
| if (evalfun(cmdentry.u.func, argc, argv, flags)) |
| goto raise; |
| break; |
| } |
| |
| out: |
| popredir(cmd_is_exec); |
| if (lastarg) |
| /* dsl: I think this is intended to be used to support |
| * '_' in 'vi' command mode during line editing... |
| * However I implemented that within libedit itself. |
| */ |
| setvar("_", lastarg, 0); |
| popstackmark(&smark); |
| } |
| |
| static int |
| evalbltin(const struct builtincmd *cmd, int argc, char **argv) |
| { |
| char *volatile savecmdname; |
| struct jmploc *volatile savehandler; |
| struct jmploc jmploc; |
| int i; |
| |
| savecmdname = commandname; |
| i = setjmp(jmploc.loc); |
| if (i) |
| goto cmddone; |
| savehandler = exception_handler; |
| exception_handler = &jmploc; |
| commandname = argv[0]; |
| argptr = argv + 1; |
| optptr = NULL; /* initialize nextopt */ |
| exitstatus = (*cmd->builtin)(argc, argv); |
| flush_stdout_stderr(); |
| cmddone: |
| exitstatus |= ferror(stdout); |
| clearerr(stdout); |
| commandname = savecmdname; |
| // exsig = 0; |
| exception_handler = savehandler; |
| |
| return i; |
| } |
| |
| static int |
| goodname(const char *p) |
| { |
| return !*endofname(p); |
| } |
| |
| |
| /* |
| * Search for a command. This is called before we fork so that the |
| * location of the command will be available in the parent as well as |
| * the child. The check for "goodname" is an overly conservative |
| * check that the name will not be subject to expansion. |
| */ |
| static void |
| prehash(union node *n) |
| { |
| struct cmdentry entry; |
| |
| if (n->type == NCMD && n->ncmd.args && goodname(n->ncmd.args->narg.text)) |
| find_command(n->ncmd.args->narg.text, &entry, 0, pathval()); |
| } |
| |
| |
| /* ============ Builtin commands |
| * |
| * Builtin commands whose functions are closely tied to evaluation |
| * are implemented here. |
| */ |
| |
| /* |
| * Handle break and continue commands. Break, continue, and return are |
| * all handled by setting the evalskip flag. The evaluation routines |
| * above all check this flag, and if it is set they start skipping |
| * commands rather than executing them. The variable skipcount is |
| * the number of loops to break/continue, or the number of function |
| * levels to return. (The latter is always 1.) It should probably |
| * be an error to break out of more loops than exist, but it isn't |
| * in the standard shell so we don't make it one here. |
| */ |
| static int |
| breakcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| int n = argv[1] ? number(argv[1]) : 1; |
| |
| if (n <= 0) |
| ash_msg_and_raise_error(illnum, argv[1]); |
| if (n > loopnest) |
| n = loopnest; |
| if (n > 0) { |
| evalskip = (**argv == 'c') ? SKIPCONT : SKIPBREAK; |
| skipcount = n; |
| } |
| return 0; |
| } |
| |
| |
| /* ============ input.c |
| * |
| * This implements the input routines used by the parser. |
| */ |
| |
| #define EOF_NLEFT -99 /* value of parsenleft when EOF pushed back */ |
| |
| enum { |
| INPUT_PUSH_FILE = 1, |
| INPUT_NOFILE_OK = 2, |
| }; |
| |
| static int plinno = 1; /* input line number */ |
| /* number of characters left in input buffer */ |
| static int parsenleft; /* copy of parsefile->nleft */ |
| static int parselleft; /* copy of parsefile->lleft */ |
| /* next character in input buffer */ |
| static char *parsenextc; /* copy of parsefile->nextc */ |
| |
| static smallint checkkwd; |
| /* values of checkkwd variable */ |
| #define CHKALIAS 0x1 |
| #define CHKKWD 0x2 |
| #define CHKNL 0x4 |
| |
| static void |
| popstring(void) |
| { |
| struct strpush *sp = g_parsefile->strpush; |
| |
| INT_OFF; |
| #if ENABLE_ASH_ALIAS |
| if (sp->ap) { |
| if (parsenextc[-1] == ' ' || parsenextc[-1] == '\t') { |
| checkkwd |= CHKALIAS; |
| } |
| if (sp->string != sp->ap->val) { |
| free(sp->string); |
| } |
| sp->ap->flag &= ~ALIASINUSE; |
| if (sp->ap->flag & ALIASDEAD) { |
| unalias(sp->ap->name); |
| } |
| } |
| #endif |
| parsenextc = sp->prevstring; |
| parsenleft = sp->prevnleft; |
| /*dprintf("*** calling popstring: restoring to '%s'\n", parsenextc);*/ |
| g_parsefile->strpush = sp->prev; |
| if (sp != &(g_parsefile->basestrpush)) |
| free(sp); |
| INT_ON; |
| } |
| |
| static int |
| preadfd(void) |
| { |
| int nr; |
| char *buf = g_parsefile->buf; |
| parsenextc = buf; |
| |
| #if ENABLE_FEATURE_EDITING |
| retry: |
| if (!iflag || g_parsefile->fd) |
| nr = nonblock_safe_read(g_parsefile->fd, buf, BUFSIZ - 1); |
| else { |
| #if ENABLE_FEATURE_TAB_COMPLETION |
| line_input_state->path_lookup = pathval(); |
| #endif |
| nr = read_line_input(cmdedit_prompt, buf, BUFSIZ, line_input_state); |
| if (nr == 0) { |
| /* Ctrl+C pressed */ |
| if (trap[SIGINT]) { |
| buf[0] = '\n'; |
| buf[1] = '\0'; |
| raise(SIGINT); |
| return 1; |
| } |
| goto retry; |
| } |
| if (nr < 0 && errno == 0) { |
| /* Ctrl+D pressed */ |
| nr = 0; |
| } |
| } |
| #else |
| nr = nonblock_safe_read(g_parsefile->fd, buf, BUFSIZ - 1); |
| #endif |
| |
| #if 0 |
| /* nonblock_safe_read() handles this problem */ |
| if (nr < 0) { |
| if (parsefile->fd == 0 && errno == EWOULDBLOCK) { |
| int flags = fcntl(0, F_GETFL); |
| if (flags >= 0 && (flags & O_NONBLOCK)) { |
| flags &= ~O_NONBLOCK; |
| if (fcntl(0, F_SETFL, flags) >= 0) { |
| out2str("sh: turning off NDELAY mode\n"); |
| goto retry; |
| } |
| } |
| } |
| } |
| #endif |
| return nr; |
| } |
| |
| /* |
| * Refill the input buffer and return the next input character: |
| * |
| * 1) If a string was pushed back on the input, pop it; |
| * 2) If an EOF was pushed back (parsenleft == EOF_NLEFT) or we are reading |
| * from a string so we can't refill the buffer, return EOF. |
| * 3) If the is more stuff in this buffer, use it else call read to fill it. |
| * 4) Process input up to the next newline, deleting nul characters. |
| */ |
| static int |
| preadbuffer(void) |
| { |
| char *q; |
| int more; |
| char savec; |
| |
| while (g_parsefile->strpush) { |
| #if ENABLE_ASH_ALIAS |
| if (parsenleft == -1 && g_parsefile->strpush->ap && |
| parsenextc[-1] != ' ' && parsenextc[-1] != '\t') { |
| return PEOA; |
| } |
| #endif |
| popstring(); |
| if (--parsenleft >= 0) |
| return signed_char2int(*parsenextc++); |
| } |
| if (parsenleft == EOF_NLEFT || g_parsefile->buf == NULL) |
| return PEOF; |
| flush_stdout_stderr(); |
| |
| more = parselleft; |
| if (more <= 0) { |
| again: |
| more = preadfd(); |
| if (more <= 0) { |
| parselleft = parsenleft = EOF_NLEFT; |
| return PEOF; |
| } |
| } |
| |
| q = parsenextc; |
| |
| /* delete nul characters */ |
| for (;;) { |
| int c; |
| |
| more--; |
| c = *q; |
| |
| if (!c) |
| memmove(q, q + 1, more); |
| else { |
| q++; |
| if (c == '\n') { |
| parsenleft = q - parsenextc - 1; |
| break; |
| } |
| } |
| |
| if (more <= 0) { |
| parsenleft = q - parsenextc - 1; |
| if (parsenleft < 0) |
| goto again; |
| break; |
| } |
| } |
| parselleft = more; |
| |
| savec = *q; |
| *q = '\0'; |
| |
| if (vflag) { |
| out2str(parsenextc); |
| } |
| |
| *q = savec; |
| |
| return signed_char2int(*parsenextc++); |
| } |
| |
| #define pgetc_as_macro() (--parsenleft >= 0? signed_char2int(*parsenextc++) : preadbuffer()) |
| static int |
| pgetc(void) |
| { |
| return pgetc_as_macro(); |
| } |
| |
| #if ENABLE_ASH_OPTIMIZE_FOR_SIZE |
| #define pgetc_macro() pgetc() |
| #else |
| #define pgetc_macro() pgetc_as_macro() |
| #endif |
| |
| /* |
| * Same as pgetc(), but ignores PEOA. |
| */ |
| #if ENABLE_ASH_ALIAS |
| static int |
| pgetc2(void) |
| { |
| int c; |
| |
| do { |
| c = pgetc_macro(); |
| } while (c == PEOA); |
| return c; |
| } |
| #else |
| static int |
| pgetc2(void) |
| { |
| return pgetc_macro(); |
| } |
| #endif |
| |
| /* |
| * Read a line from the script. |
| */ |
| static char * |
| pfgets(char *line, int len) |
| { |
| char *p = line; |
| int nleft = len; |
| int c; |
| |
| while (--nleft > 0) { |
| c = pgetc2(); |
| if (c == PEOF) { |
| if (p == line) |
| return NULL; |
| break; |
| } |
| *p++ = c; |
| if (c == '\n') |
| break; |
| } |
| *p = '\0'; |
| return line; |
| } |
| |
| /* |
| * Undo the last call to pgetc. Only one character may be pushed back. |
| * PEOF may be pushed back. |
| */ |
| static void |
| pungetc(void) |
| { |
| parsenleft++; |
| parsenextc--; |
| } |
| |
| /* |
| * Push a string back onto the input at this current parsefile level. |
| * We handle aliases this way. |
| */ |
| #if !ENABLE_ASH_ALIAS |
| #define pushstring(s, ap) pushstring(s) |
| #endif |
| static void |
| pushstring(char *s, struct alias *ap) |
| { |
| struct strpush *sp; |
| size_t len; |
| |
| len = strlen(s); |
| INT_OFF; |
| /*dprintf("*** calling pushstring: %s, %d\n", s, len);*/ |
| if (g_parsefile->strpush) { |
| sp = ckzalloc(sizeof(struct strpush)); |
| sp->prev = g_parsefile->strpush; |
| g_parsefile->strpush = sp; |
| } else |
| sp = g_parsefile->strpush = &(g_parsefile->basestrpush); |
| sp->prevstring = parsenextc; |
| sp->prevnleft = parsenleft; |
| #if ENABLE_ASH_ALIAS |
| sp->ap = ap; |
| if (ap) { |
| ap->flag |= ALIASINUSE; |
| sp->string = s; |
| } |
| #endif |
| parsenextc = s; |
| parsenleft = len; |
| INT_ON; |
| } |
| |
| /* |
| * To handle the "." command, a stack of input files is used. Pushfile |
| * adds a new entry to the stack and popfile restores the previous level. |
| */ |
| static void |
| pushfile(void) |
| { |
| struct parsefile *pf; |
| |
| g_parsefile->nleft = parsenleft; |
| g_parsefile->lleft = parselleft; |
| g_parsefile->nextc = parsenextc; |
| g_parsefile->linno = plinno; |
| pf = ckzalloc(sizeof(*pf)); |
| pf->prev = g_parsefile; |
| pf->fd = -1; |
| /*pf->strpush = NULL; - ckzalloc did it */ |
| /*pf->basestrpush.prev = NULL;*/ |
| g_parsefile = pf; |
| } |
| |
| static void |
| popfile(void) |
| { |
| struct parsefile *pf = g_parsefile; |
| |
| INT_OFF; |
| if (pf->fd >= 0) |
| close(pf->fd); |
| free(pf->buf); |
| while (pf->strpush) |
| popstring(); |
| g_parsefile = pf->prev; |
| free(pf); |
| parsenleft = g_parsefile->nleft; |
| parselleft = g_parsefile->lleft; |
| parsenextc = g_parsefile->nextc; |
| plinno = g_parsefile->linno; |
| INT_ON; |
| } |
| |
| /* |
| * Return to top level. |
| */ |
| static void |
| popallfiles(void) |
| { |
| while (g_parsefile != &basepf) |
| popfile(); |
| } |
| |
| /* |
| * Close the file(s) that the shell is reading commands from. Called |
| * after a fork is done. |
| */ |
| static void |
| closescript(void) |
| { |
| popallfiles(); |
| if (g_parsefile->fd > 0) { |
| close(g_parsefile->fd); |
| g_parsefile->fd = 0; |
| } |
| } |
| |
| /* |
| * Like setinputfile, but takes an open file descriptor. Call this with |
| * interrupts off. |
| */ |
| static void |
| setinputfd(int fd, int push) |
| { |
| close_on_exec_on(fd); |
| if (push) { |
| pushfile(); |
| g_parsefile->buf = 0; |
| } |
| g_parsefile->fd = fd; |
| if (g_parsefile->buf == NULL) |
| g_parsefile->buf = ckmalloc(IBUFSIZ); |
| parselleft = parsenleft = 0; |
| plinno = 1; |
| } |
| |
| /* |
| * Set the input to take input from a file. If push is set, push the |
| * old input onto the stack first. |
| */ |
| static int |
| setinputfile(const char *fname, int flags) |
| { |
| int fd; |
| int fd2; |
| |
| INT_OFF; |
| fd = open(fname, O_RDONLY); |
| if (fd < 0) { |
| if (flags & INPUT_NOFILE_OK) |
| goto out; |
| ash_msg_and_raise_error("can't open %s", fname); |
| } |
| if (fd < 10) { |
| fd2 = copyfd(fd, 10); |
| close(fd); |
| if (fd2 < 0) |
| ash_msg_and_raise_error("out of file descriptors"); |
| fd = fd2; |
| } |
| setinputfd(fd, flags & INPUT_PUSH_FILE); |
| out: |
| INT_ON; |
| return fd; |
| } |
| |
| /* |
| * Like setinputfile, but takes input from a string. |
| */ |
| static void |
| setinputstring(char *string) |
| { |
| INT_OFF; |
| pushfile(); |
| parsenextc = string; |
| parsenleft = strlen(string); |
| g_parsefile->buf = NULL; |
| plinno = 1; |
| INT_ON; |
| } |
| |
| |
| /* ============ mail.c |
| * |
| * Routines to check for mail. |
| */ |
| |
| #if ENABLE_ASH_MAIL |
| |
| #define MAXMBOXES 10 |
| |
| /* times of mailboxes */ |
| static time_t mailtime[MAXMBOXES]; |
| /* Set if MAIL or MAILPATH is changed. */ |
| static smallint mail_var_path_changed; |
| |
| /* |
| * Print appropriate message(s) if mail has arrived. |
| * If mail_var_path_changed is set, |
| * then the value of MAIL has mail_var_path_changed, |
| * so we just update the values. |
| */ |
| static void |
| chkmail(void) |
| { |
| const char *mpath; |
| char *p; |
| char *q; |
| time_t *mtp; |
| struct stackmark smark; |
| struct stat statb; |
| |
| setstackmark(&smark); |
| mpath = mpathset() ? mpathval() : mailval(); |
| for (mtp = mailtime; mtp < mailtime + MAXMBOXES; mtp++) { |
| p = padvance(&mpath, nullstr); |
| if (p == NULL) |
| break; |
| if (*p == '\0') |
| continue; |
| for (q = p; *q; q++) |
| continue; |
| #if DEBUG |
| if (q[-1] != '/') |
| abort(); |
| #endif |
| q[-1] = '\0'; /* delete trailing '/' */ |
| if (stat(p, &statb) < 0) { |
| *mtp = 0; |
| continue; |
| } |
| if (!mail_var_path_changed && statb.st_mtime != *mtp) { |
| fprintf( |
| stderr, snlfmt, |
| pathopt ? pathopt : "you have mail" |
| ); |
| } |
| *mtp = statb.st_mtime; |
| } |
| mail_var_path_changed = 0; |
| popstackmark(&smark); |
| } |
| |
| static void |
| changemail(const char *val ATTRIBUTE_UNUSED) |
| { |
| mail_var_path_changed = 1; |
| } |
| |
| #endif /* ASH_MAIL */ |
| |
| |
| /* ============ ??? */ |
| |
| /* |
| * Set the shell parameters. |
| */ |
| static void |
| setparam(char **argv) |
| { |
| char **newparam; |
| char **ap; |
| int nparam; |
| |
| for (nparam = 0; argv[nparam]; nparam++) |
| continue; |
| ap = newparam = ckmalloc((nparam + 1) * sizeof(*ap)); |
| while (*argv) { |
| *ap++ = ckstrdup(*argv++); |
| } |
| *ap = NULL; |
| freeparam(&shellparam); |
| shellparam.malloced = 1; |
| shellparam.nparam = nparam; |
| shellparam.p = newparam; |
| #if ENABLE_ASH_GETOPTS |
| shellparam.optind = 1; |
| shellparam.optoff = -1; |
| #endif |
| } |
| |
| /* |
| * Process shell options. The global variable argptr contains a pointer |
| * to the argument list; we advance it past the options. |
| * |
| * SUSv3 section 2.8.1 "Consequences of Shell Errors" says: |
| * For a non-interactive shell, an error condition encountered |
| * by a special built-in ... shall cause the shell to write a diagnostic message |
| * to standard error and exit as shown in the following table: |
| * Error Special Built-In |
| * ... |
| * Utility syntax error (option or operand error) Shall exit |
| * ... |
| * However, in bug 1142 (http://busybox.net/bugs/view.php?id=1142) |
| * we see that bash does not do that (set "finishes" with error code 1 instead, |
| * and shell continues), and people rely on this behavior! |
| * Testcase: |
| * set -o barfoo 2>/dev/null |
| * echo $? |
| * |
| * Oh well. Let's mimic that. |
| */ |
| static int |
| plus_minus_o(char *name, int val) |
| { |
| int i; |
| |
| if (name) { |
| for (i = 0; i < NOPTS; i++) { |
| if (strcmp(name, optnames(i)) == 0) { |
| optlist[i] = val; |
| return 0; |
| } |
| } |
| ash_msg("illegal option %co %s", val ? '-' : '+', name); |
| return 1; |
| } |
| for (i = 0; i < NOPTS; i++) { |
| if (val) { |
| out1fmt("%-16s%s\n", optnames(i), optlist[i] ? "on" : "off"); |
| } else { |
| out1fmt("set %co %s\n", optlist[i] ? '-' : '+', optnames(i)); |
| } |
| } |
| return 0; |
| } |
| static void |
| setoption(int flag, int val) |
| { |
| int i; |
| |
| for (i = 0; i < NOPTS; i++) { |
| if (optletters(i) == flag) { |
| optlist[i] = val; |
| return; |
| } |
| } |
| ash_msg_and_raise_error("illegal option %c%c", val ? '-' : '+', flag); |
| /* NOTREACHED */ |
| } |
| static int |
| options(int cmdline) |
| { |
| char *p; |
| int val; |
| int c; |
| |
| if (cmdline) |
| minusc = NULL; |
| while ((p = *argptr) != NULL) { |
| c = *p++; |
| if (c != '-' && c != '+') |
| break; |
| argptr++; |
| val = 0; /* val = 0 if c == '+' */ |
| if (c == '-') { |
| val = 1; |
| if (p[0] == '\0' || LONE_DASH(p)) { |
| if (!cmdline) { |
| /* "-" means turn off -x and -v */ |
| if (p[0] == '\0') |
| xflag = vflag = 0; |
| /* "--" means reset params */ |
| else if (*argptr == NULL) |
| setparam(argptr); |
| } |
| break; /* "-" or "--" terminates options */ |
| } |
| } |
| /* first char was + or - */ |
| while ((c = *p++) != '\0') { |
| /* bash 3.2 indeed handles -c CMD and +c CMD the same */ |
| if (c == 'c' && cmdline) { |
| minusc = p; /* command is after shell args */ |
| } else if (c == 'o') { |
| if (plus_minus_o(*argptr, val)) { |
| /* it already printed err message */ |
| return 1; /* error */ |
| } |
| if (*argptr) |
| argptr++; |
| } else if (cmdline && (c == 'l')) { /* -l or +l == --login */ |
| isloginsh = 1; |
| /* bash does not accept +-login, we also won't */ |
| } else if (cmdline && val && (c == '-')) { /* long options */ |
| if (strcmp(p, "login") == 0) |
| isloginsh = 1; |
| break; |
| } else { |
| setoption(c, val); |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * The shift builtin command. |
| */ |
| static int |
| shiftcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| int n; |
| char **ap1, **ap2; |
| |
| n = 1; |
| if (argv[1]) |
| n = number(argv[1]); |
| if (n > shellparam.nparam) |
| n = shellparam.nparam; |
| INT_OFF; |
| shellparam.nparam -= n; |
| for (ap1 = shellparam.p; --n >= 0; ap1++) { |
| if (shellparam.malloced) |
| free(*ap1); |
| } |
| ap2 = shellparam.p; |
| while ((*ap2++ = *ap1++) != NULL) |
| continue; |
| #if ENABLE_ASH_GETOPTS |
| shellparam.optind = 1; |
| shellparam.optoff = -1; |
| #endif |
| INT_ON; |
| return 0; |
| } |
| |
| /* |
| * POSIX requires that 'set' (but not export or readonly) output the |
| * variables in lexicographic order - by the locale's collating order (sigh). |
| * Maybe we could keep them in an ordered balanced binary tree |
| * instead of hashed lists. |
| * For now just roll 'em through qsort for printing... |
| */ |
| static int |
| showvars(const char *sep_prefix, int on, int off) |
| { |
| const char *sep; |
| char **ep, **epend; |
| |
| ep = listvars(on, off, &epend); |
| qsort(ep, epend - ep, sizeof(char *), vpcmp); |
| |
| sep = *sep_prefix ? " " : sep_prefix; |
| |
| for (; ep < epend; ep++) { |
| const char *p; |
| const char *q; |
| |
| p = strchrnul(*ep, '='); |
| q = nullstr; |
| if (*p) |
| q = single_quote(++p); |
| out1fmt("%s%s%.*s%s\n", sep_prefix, sep, (int)(p - *ep), *ep, q); |
| } |
| return 0; |
| } |
| |
| /* |
| * The set command builtin. |
| */ |
| static int |
| setcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| int retval; |
| |
| if (!argv[1]) |
| return showvars(nullstr, 0, VUNSET); |
| INT_OFF; |
| retval = 1; |
| if (!options(0)) { /* if no parse error... */ |
| retval = 0; |
| optschanged(); |
| if (*argptr != NULL) { |
| setparam(argptr); |
| } |
| } |
| INT_ON; |
| return retval; |
| } |
| |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| static void |
| change_random(const char *value) |
| { |
| /* Galois LFSR parameter */ |
| /* Taps at 32 31 29 1: */ |
| enum { MASK = 0x8000000b }; |
| /* Another example - taps at 32 31 30 10: */ |
| /* MASK = 0x00400007 */ |
| |
| if (value == NULL) { |
| /* "get", generate */ |
| uint32_t t; |
| |
| /* LCG has period of 2^32 and alternating lowest bit */ |
| random_LCG = 1664525 * random_LCG + 1013904223; |
| /* Galois LFSR has period of 2^32-1 = 3 * 5 * 17 * 257 * 65537 */ |
| t = (random_galois_LFSR << 1); |
| if (random_galois_LFSR < 0) /* if we just shifted 1 out of msb... */ |
| t ^= MASK; |
| random_galois_LFSR = t; |
| /* Both are weak, combining them gives better randomness |
| * and ~2^64 period. & 0x7fff is probably bash compat |
| * for $RANDOM range. Combining with subtraction is |
| * just for fun. + and ^ would work equally well. */ |
| t = (t - random_LCG) & 0x7fff; |
| /* set without recursion */ |
| setvar(vrandom.text, utoa(t), VNOFUNC); |
| vrandom.flags &= ~VNOFUNC; |
| } else { |
| /* set/reset */ |
| random_galois_LFSR = random_LCG = strtoul(value, (char **)NULL, 10); |
| } |
| } |
| #endif |
| |
| #if ENABLE_ASH_GETOPTS |
| static int |
| getopts(char *optstr, char *optvar, char **optfirst, int *param_optind, int *optoff) |
| { |
| char *p, *q; |
| char c = '?'; |
| int done = 0; |
| int err = 0; |
| char s[12]; |
| char **optnext; |
| |
| if (*param_optind < 1) |
| return 1; |
| optnext = optfirst + *param_optind - 1; |
| |
| if (*param_optind <= 1 || *optoff < 0 || (int)strlen(optnext[-1]) < *optoff) |
| p = NULL; |
| else |
| p = optnext[-1] + *optoff; |
| if (p == NULL || *p == '\0') { |
| /* Current word is done, advance */ |
| p = *optnext; |
| if (p == NULL || *p != '-' || *++p == '\0') { |
| atend: |
| p = NULL; |
| done = 1; |
| goto out; |
| } |
| optnext++; |
| if (LONE_DASH(p)) /* check for "--" */ |
| goto atend; |
| } |
| |
| c = *p++; |
| for (q = optstr; *q != c;) { |
| if (*q == '\0') { |
| if (optstr[0] == ':') { |
| s[0] = c; |
| s[1] = '\0'; |
| err |= setvarsafe("OPTARG", s, 0); |
| } else { |
| fprintf(stderr, "Illegal option -%c\n", c); |
| unsetvar("OPTARG"); |
| } |
| c = '?'; |
| goto out; |
| } |
| if (*++q == ':') |
| q++; |
| } |
| |
| if (*++q == ':') { |
| if (*p == '\0' && (p = *optnext) == NULL) { |
| if (optstr[0] == ':') { |
| s[0] = c; |
| s[1] = '\0'; |
| err |= setvarsafe("OPTARG", s, 0); |
| c = ':'; |
| } else { |
| fprintf(stderr, "No arg for -%c option\n", c); |
| unsetvar("OPTARG"); |
| c = '?'; |
| } |
| goto out; |
| } |
| |
| if (p == *optnext) |
| optnext++; |
| err |= setvarsafe("OPTARG", p, 0); |
| p = NULL; |
| } else |
| err |= setvarsafe("OPTARG", nullstr, 0); |
| out: |
| *optoff = p ? p - *(optnext - 1) : -1; |
| *param_optind = optnext - optfirst + 1; |
| fmtstr(s, sizeof(s), "%d", *param_optind); |
| err |= setvarsafe("OPTIND", s, VNOFUNC); |
| s[0] = c; |
| s[1] = '\0'; |
| err |= setvarsafe(optvar, s, 0); |
| if (err) { |
| *param_optind = 1; |
| *optoff = -1; |
| flush_stdout_stderr(); |
| raise_exception(EXERROR); |
| } |
| return done; |
| } |
| |
| /* |
| * The getopts builtin. Shellparam.optnext points to the next argument |
| * to be processed. Shellparam.optptr points to the next character to |
| * be processed in the current argument. If shellparam.optnext is NULL, |
| * then it's the first time getopts has been called. |
| */ |
| static int |
| getoptscmd(int argc, char **argv) |
| { |
| char **optbase; |
| |
| if (argc < 3) |
| ash_msg_and_raise_error("usage: getopts optstring var [arg]"); |
| if (argc == 3) { |
| optbase = shellparam.p; |
| if (shellparam.optind > shellparam.nparam + 1) { |
| shellparam.optind = 1; |
| shellparam.optoff = -1; |
| } |
| } else { |
| optbase = &argv[3]; |
| if (shellparam.optind > argc - 2) { |
| shellparam.optind = 1; |
| shellparam.optoff = -1; |
| } |
| } |
| |
| return getopts(argv[1], argv[2], optbase, &shellparam.optind, |
| &shellparam.optoff); |
| } |
| #endif /* ASH_GETOPTS */ |
| |
| |
| /* ============ Shell parser */ |
| |
| struct heredoc { |
| struct heredoc *next; /* next here document in list */ |
| union node *here; /* redirection node */ |
| char *eofmark; /* string indicating end of input */ |
| smallint striptabs; /* if set, strip leading tabs */ |
| }; |
| |
| static smallint tokpushback; /* last token pushed back */ |
| static smallint parsebackquote; /* nonzero if we are inside backquotes */ |
| static smallint quoteflag; /* set if (part of) last token was quoted */ |
| static token_id_t lasttoken; /* last token read (integer id Txxx) */ |
| static struct heredoc *heredoclist; /* list of here documents to read */ |
| static char *wordtext; /* text of last word returned by readtoken */ |
| static struct nodelist *backquotelist; |
| static union node *redirnode; |
| static struct heredoc *heredoc; |
| /* |
| * NEOF is returned by parsecmd when it encounters an end of file. It |
| * must be distinct from NULL, so we use the address of a variable that |
| * happens to be handy. |
| */ |
| #define NEOF ((union node *)&tokpushback) |
| |
| static void raise_error_syntax(const char *) ATTRIBUTE_NORETURN; |
| static void |
| raise_error_syntax(const char *msg) |
| { |
| ash_msg_and_raise_error("syntax error: %s", msg); |
| /* NOTREACHED */ |
| } |
| |
| /* |
| * Called when an unexpected token is read during the parse. The argument |
| * is the token that is expected, or -1 if more than one type of token can |
| * occur at this point. |
| */ |
| static void raise_error_unexpected_syntax(int) ATTRIBUTE_NORETURN; |
| static void |
| raise_error_unexpected_syntax(int token) |
| { |
| char msg[64]; |
| int l; |
| |
| l = sprintf(msg, "%s unexpected", tokname(lasttoken)); |
| if (token >= 0) |
| sprintf(msg + l, " (expecting %s)", tokname(token)); |
| raise_error_syntax(msg); |
| /* NOTREACHED */ |
| } |
| |
| #define EOFMARKLEN 79 |
| |
| /* parsing is heavily cross-recursive, need these forward decls */ |
| static union node *andor(void); |
| static union node *pipeline(void); |
| static union node *parse_command(void); |
| static void parseheredoc(void); |
| static char peektoken(void); |
| static int readtoken(void); |
| |
| static union node * |
| list(int nlflag) |
| { |
| union node *n1, *n2, *n3; |
| int tok; |
| |
| checkkwd = CHKNL | CHKKWD | CHKALIAS; |
| if (nlflag == 2 && peektoken()) |
| return NULL; |
| n1 = NULL; |
| for (;;) { |
| n2 = andor(); |
| tok = readtoken(); |
| if (tok == TBACKGND) { |
| if (n2->type == NPIPE) { |
| n2->npipe.backgnd = 1; |
| } else { |
| if (n2->type != NREDIR) { |
| n3 = stzalloc(sizeof(struct nredir)); |
| n3->nredir.n = n2; |
| /*n3->nredir.redirect = NULL; - stzalloc did it */ |
| n2 = n3; |
| } |
| n2->type = NBACKGND; |
| } |
| } |
| if (n1 == NULL) { |
| n1 = n2; |
| } else { |
| n3 = stzalloc(sizeof(struct nbinary)); |
| n3->type = NSEMI; |
| n3->nbinary.ch1 = n1; |
| n3->nbinary.ch2 = n2; |
| n1 = n3; |
| } |
| switch (tok) { |
| case TBACKGND: |
| case TSEMI: |
| tok = readtoken(); |
| /* fall through */ |
| case TNL: |
| if (tok == TNL) { |
| parseheredoc(); |
| if (nlflag == 1) |
| return n1; |
| } else { |
| tokpushback = 1; |
| } |
| checkkwd = CHKNL | CHKKWD | CHKALIAS; |
| if (peektoken()) |
| return n1; |
| break; |
| case TEOF: |
| if (heredoclist) |
| parseheredoc(); |
| else |
| pungetc(); /* push back EOF on input */ |
| return n1; |
| default: |
| if (nlflag == 1) |
| raise_error_unexpected_syntax(-1); |
| tokpushback = 1; |
| return n1; |
| } |
| } |
| } |
| |
| static union node * |
| andor(void) |
| { |
| union node *n1, *n2, *n3; |
| int t; |
| |
| n1 = pipeline(); |
| for (;;) { |
| t = readtoken(); |
| if (t == TAND) { |
| t = NAND; |
| } else if (t == TOR) { |
| t = NOR; |
| } else { |
| tokpushback = 1; |
| return n1; |
| } |
| checkkwd = CHKNL | CHKKWD | CHKALIAS; |
| n2 = pipeline(); |
| n3 = stzalloc(sizeof(struct nbinary)); |
| n3->type = t; |
| n3->nbinary.ch1 = n1; |
| n3->nbinary.ch2 = n2; |
| n1 = n3; |
| } |
| } |
| |
| static union node * |
| pipeline(void) |
| { |
| union node *n1, *n2, *pipenode; |
| struct nodelist *lp, *prev; |
| int negate; |
| |
| negate = 0; |
| TRACE(("pipeline: entered\n")); |
| if (readtoken() == TNOT) { |
| negate = !negate; |
| checkkwd = CHKKWD | CHKALIAS; |
| } else |
| tokpushback = 1; |
| n1 = parse_command(); |
| if (readtoken() == TPIPE) { |
| pipenode = stzalloc(sizeof(struct npipe)); |
| pipenode->type = NPIPE; |
| /*pipenode->npipe.backgnd = 0; - stzalloc did it */ |
| lp = stzalloc(sizeof(struct nodelist)); |
| pipenode->npipe.cmdlist = lp; |
| lp->n = n1; |
| do { |
| prev = lp; |
| lp = stzalloc(sizeof(struct nodelist)); |
| checkkwd = CHKNL | CHKKWD | CHKALIAS; |
| lp->n = parse_command(); |
| prev->next = lp; |
| } while (readtoken() == TPIPE); |
| lp->next = NULL; |
| n1 = pipenode; |
| } |
| tokpushback = 1; |
| if (negate) { |
| n2 = stzalloc(sizeof(struct nnot)); |
| n2->type = NNOT; |
| n2->nnot.com = n1; |
| return n2; |
| } |
| return n1; |
| } |
| |
| static union node * |
| makename(void) |
| { |
| union node *n; |
| |
| n = stzalloc(sizeof(struct narg)); |
| n->type = NARG; |
| /*n->narg.next = NULL; - stzalloc did it */ |
| n->narg.text = wordtext; |
| n->narg.backquote = backquotelist; |
| return n; |
| } |
| |
| static void |
| fixredir(union node *n, const char *text, int err) |
| { |
| TRACE(("Fix redir %s %d\n", text, err)); |
| if (!err) |
| n->ndup.vname = NULL; |
| |
| if (isdigit(text[0]) && text[1] == '\0') |
| n->ndup.dupfd = text[0] - '0'; |
| else if (LONE_DASH(text)) |
| n->ndup.dupfd = -1; |
| else { |
| if (err) |
| raise_error_syntax("Bad fd number"); |
| n->ndup.vname = makename(); |
| } |
| } |
| |
| /* |
| * Returns true if the text contains nothing to expand (no dollar signs |
| * or backquotes). |
| */ |
| static int |
| noexpand(char *text) |
| { |
| char *p; |
| char c; |
| |
| p = text; |
| while ((c = *p++) != '\0') { |
| if (c == CTLQUOTEMARK) |
| continue; |
| if (c == CTLESC) |
| p++; |
| else if (SIT(c, BASESYNTAX) == CCTL) |
| return 0; |
| } |
| return 1; |
| } |
| |
| static void |
| parsefname(void) |
| { |
| union node *n = redirnode; |
| |
| if (readtoken() != TWORD) |
| raise_error_unexpected_syntax(-1); |
| if (n->type == NHERE) { |
| struct heredoc *here = heredoc; |
| struct heredoc *p; |
| int i; |
| |
| if (quoteflag == 0) |
| n->type = NXHERE; |
| TRACE(("Here document %d\n", n->type)); |
| if (!noexpand(wordtext) || (i = strlen(wordtext)) == 0 || i > EOFMARKLEN) |
| raise_error_syntax("Illegal eof marker for << redirection"); |
| rmescapes(wordtext); |
| here->eofmark = wordtext; |
| here->next = NULL; |
| if (heredoclist == NULL) |
| heredoclist = here; |
| else { |
| for (p = heredoclist; p->next; p = p->next) |
| continue; |
| p->next = here; |
| } |
| } else if (n->type == NTOFD || n->type == NFROMFD) { |
| fixredir(n, wordtext, 0); |
| } else { |
| n->nfile.fname = makename(); |
| } |
| } |
| |
| static union node * |
| simplecmd(void) |
| { |
| union node *args, **app; |
| union node *n = NULL; |
| union node *vars, **vpp; |
| union node **rpp, *redir; |
| int savecheckkwd; |
| #if ENABLE_ASH_BASH_COMPAT |
| smallint double_brackets_flag = 0; |
| #endif |
| |
| args = NULL; |
| app = &args; |
| vars = NULL; |
| vpp = &vars; |
| redir = NULL; |
| rpp = &redir; |
| |
| savecheckkwd = CHKALIAS; |
| for (;;) { |
| int t; |
| checkkwd = savecheckkwd; |
| t = readtoken(); |
| switch (t) { |
| #if ENABLE_ASH_BASH_COMPAT |
| case TAND: /* "&&" */ |
| case TOR: /* "||" */ |
| if (!double_brackets_flag) { |
| tokpushback = 1; |
| goto out; |
| } |
| wordtext = (char *) (t == TAND ? "-a" : "-o"); |
| #endif |
| case TWORD: |
| n = stzalloc(sizeof(struct narg)); |
| n->type = NARG; |
| /*n->narg.next = NULL; - stzalloc did it */ |
| n->narg.text = wordtext; |
| #if ENABLE_ASH_BASH_COMPAT |
| if (strcmp("[[", wordtext) == 0) |
| double_brackets_flag = 1; |
| else if (strcmp("]]", wordtext) == 0) |
| double_brackets_flag = 0; |
| #endif |
| n->narg.backquote = backquotelist; |
| if (savecheckkwd && isassignment(wordtext)) { |
| *vpp = n; |
| vpp = &n->narg.next; |
| } else { |
| *app = n; |
| app = &n->narg.next; |
| savecheckkwd = 0; |
| } |
| break; |
| case TREDIR: |
| *rpp = n = redirnode; |
| rpp = &n->nfile.next; |
| parsefname(); /* read name of redirection file */ |
| break; |
| case TLP: |
| if (args && app == &args->narg.next |
| && !vars && !redir |
| ) { |
| struct builtincmd *bcmd; |
| const char *name; |
| |
| /* We have a function */ |
| if (readtoken() != TRP) |
| raise_error_unexpected_syntax(TRP); |
| name = n->narg.text; |
| if (!goodname(name) |
| || ((bcmd = find_builtin(name)) && IS_BUILTIN_SPECIAL(bcmd)) |
| ) { |
| raise_error_syntax("Bad function name"); |
| } |
| n->type = NDEFUN; |
| checkkwd = CHKNL | CHKKWD | CHKALIAS; |
| n->narg.next = parse_command(); |
| return n; |
| } |
| /* fall through */ |
| default: |
| tokpushback = 1; |
| goto out; |
| } |
| } |
| out: |
| *app = NULL; |
| *vpp = NULL; |
| *rpp = NULL; |
| n = stzalloc(sizeof(struct ncmd)); |
| n->type = NCMD; |
| n->ncmd.args = args; |
| n->ncmd.assign = vars; |
| n->ncmd.redirect = redir; |
| return n; |
| } |
| |
| static union node * |
| parse_command(void) |
| { |
| union node *n1, *n2; |
| union node *ap, **app; |
| union node *cp, **cpp; |
| union node *redir, **rpp; |
| union node **rpp2; |
| int t; |
| |
| redir = NULL; |
| rpp2 = &redir; |
| |
| switch (readtoken()) { |
| default: |
| raise_error_unexpected_syntax(-1); |
| /* NOTREACHED */ |
| case TIF: |
| n1 = stzalloc(sizeof(struct nif)); |
| n1->type = NIF; |
| n1->nif.test = list(0); |
| if (readtoken() != TTHEN) |
| raise_error_unexpected_syntax(TTHEN); |
| n1->nif.ifpart = list(0); |
| n2 = n1; |
| while (readtoken() == TELIF) { |
| n2->nif.elsepart = stzalloc(sizeof(struct nif)); |
| n2 = n2->nif.elsepart; |
| n2->type = NIF; |
| n2->nif.test = list(0); |
| if (readtoken() != TTHEN) |
| raise_error_unexpected_syntax(TTHEN); |
| n2->nif.ifpart = list(0); |
| } |
| if (lasttoken == TELSE) |
| n2->nif.elsepart = list(0); |
| else { |
| n2->nif.elsepart = NULL; |
| tokpushback = 1; |
| } |
| t = TFI; |
| break; |
| case TWHILE: |
| case TUNTIL: { |
| int got; |
| n1 = stzalloc(sizeof(struct nbinary)); |
| n1->type = (lasttoken == TWHILE) ? NWHILE : NUNTIL; |
| n1->nbinary.ch1 = list(0); |
| got = readtoken(); |
| if (got != TDO) { |
| TRACE(("expecting DO got %s %s\n", tokname(got), |
| got == TWORD ? wordtext : "")); |
| raise_error_unexpected_syntax(TDO); |
| } |
| n1->nbinary.ch2 = list(0); |
| t = TDONE; |
| break; |
| } |
| case TFOR: |
| if (readtoken() != TWORD || quoteflag || ! goodname(wordtext)) |
| raise_error_syntax("Bad for loop variable"); |
| n1 = stzalloc(sizeof(struct nfor)); |
| n1->type = NFOR; |
| n1->nfor.var = wordtext; |
| checkkwd = CHKKWD | CHKALIAS; |
| if (readtoken() == TIN) { |
| app = ≈ |
| while (readtoken() == TWORD) { |
| n2 = stzalloc(sizeof(struct narg)); |
| n2->type = NARG; |
| /*n2->narg.next = NULL; - stzalloc did it */ |
| n2->narg.text = wordtext; |
| n2->narg.backquote = backquotelist; |
| *app = n2; |
| app = &n2->narg.next; |
| } |
| *app = NULL; |
| n1->nfor.args = ap; |
| if (lasttoken != TNL && lasttoken != TSEMI) |
| raise_error_unexpected_syntax(-1); |
| } else { |
| n2 = stzalloc(sizeof(struct narg)); |
| n2->type = NARG; |
| /*n2->narg.next = NULL; - stzalloc did it */ |
| n2->narg.text = (char *)dolatstr; |
| /*n2->narg.backquote = NULL;*/ |
| n1->nfor.args = n2; |
| /* |
| * Newline or semicolon here is optional (but note |
| * that the original Bourne shell only allowed NL). |
| */ |
| if (lasttoken != TNL && lasttoken != TSEMI) |
| tokpushback = 1; |
| } |
| checkkwd = CHKNL | CHKKWD | CHKALIAS; |
| if (readtoken() != TDO) |
| raise_error_unexpected_syntax(TDO); |
| n1->nfor.body = list(0); |
| t = TDONE; |
| break; |
| case TCASE: |
| n1 = stzalloc(sizeof(struct ncase)); |
| n1->type = NCASE; |
| if (readtoken() != TWORD) |
| raise_error_unexpected_syntax(TWORD); |
| n1->ncase.expr = n2 = stzalloc(sizeof(struct narg)); |
| n2->type = NARG; |
| /*n2->narg.next = NULL; - stzalloc did it */ |
| n2->narg.text = wordtext; |
| n2->narg.backquote = backquotelist; |
| do { |
| checkkwd = CHKKWD | CHKALIAS; |
| } while (readtoken() == TNL); |
| if (lasttoken != TIN) |
| raise_error_unexpected_syntax(TIN); |
| cpp = &n1->ncase.cases; |
| next_case: |
| checkkwd = CHKNL | CHKKWD; |
| t = readtoken(); |
| while (t != TESAC) { |
| if (lasttoken == TLP) |
| readtoken(); |
| *cpp = cp = stzalloc(sizeof(struct nclist)); |
| cp->type = NCLIST; |
| app = &cp->nclist.pattern; |
| for (;;) { |
| *app = ap = stzalloc(sizeof(struct narg)); |
| ap->type = NARG; |
| /*ap->narg.next = NULL; - stzalloc did it */ |
| ap->narg.text = wordtext; |
| ap->narg.backquote = backquotelist; |
| if (readtoken() != TPIPE) |
| break; |
| app = &ap->narg.next; |
| readtoken(); |
| } |
| //ap->narg.next = NULL; |
| if (lasttoken != TRP) |
| raise_error_unexpected_syntax(TRP); |
| cp->nclist.body = list(2); |
| |
| cpp = &cp->nclist.next; |
| |
| checkkwd = CHKNL | CHKKWD; |
| t = readtoken(); |
| if (t != TESAC) { |
| if (t != TENDCASE) |
| raise_error_unexpected_syntax(TENDCASE); |
| goto next_case; |
| } |
| } |
| *cpp = NULL; |
| goto redir; |
| case TLP: |
| n1 = stzalloc(sizeof(struct nredir)); |
| n1->type = NSUBSHELL; |
| n1->nredir.n = list(0); |
| /*n1->nredir.redirect = NULL; - stzalloc did it */ |
| t = TRP; |
| break; |
| case TBEGIN: |
| n1 = list(0); |
| t = TEND; |
| break; |
| case TWORD: |
| case TREDIR: |
| tokpushback = 1; |
| return simplecmd(); |
| } |
| |
| if (readtoken() != t) |
| raise_error_unexpected_syntax(t); |
| |
| redir: |
| /* Now check for redirection which may follow command */ |
| checkkwd = CHKKWD | CHKALIAS; |
| rpp = rpp2; |
| while (readtoken() == TREDIR) { |
| *rpp = n2 = redirnode; |
| rpp = &n2->nfile.next; |
| parsefname(); |
| } |
| tokpushback = 1; |
| *rpp = NULL; |
| if (redir) { |
| if (n1->type != NSUBSHELL) { |
| n2 = stzalloc(sizeof(struct nredir)); |
| n2->type = NREDIR; |
| n2->nredir.n = n1; |
| n1 = n2; |
| } |
| n1->nredir.redirect = redir; |
| } |
| return n1; |
| } |
| |
| #if ENABLE_ASH_BASH_COMPAT |
| static int decode_dollar_squote(void) |
| { |
| static const char C_escapes[] ALIGN1 = "nrbtfav""x\\01234567"; |
| int c, cnt; |
| char *p; |
| char buf[4]; |
| |
| c = pgetc(); |
| p = strchr(C_escapes, c); |
| if (p) { |
| buf[0] = c; |
| p = buf; |
| cnt = 3; |
| if ((unsigned char)(c - '0') <= 7) { /* \ooo */ |
| do { |
| c = pgetc(); |
| *++p = c; |
| } while ((unsigned char)(c - '0') <= 7 && --cnt); |
| pungetc(); |
| } else if (c == 'x') { /* \xHH */ |
| do { |
| c = pgetc(); |
| *++p = c; |
| } while (isxdigit(c) && --cnt); |
| pungetc(); |
| if (cnt == 3) { /* \x but next char is "bad" */ |
| c = 'x'; |
| goto unrecognized; |
| } |
| } else { /* simple seq like \\ or \t */ |
| p++; |
| } |
| *p = '\0'; |
| p = buf; |
| c = bb_process_escape_sequence((void*)&p); |
| } else { /* unrecognized "\z": print both chars unless ' or " */ |
| if (c != '\'' && c != '"') { |
| unrecognized: |
| c |= 0x100; /* "please encode \, then me" */ |
| } |
| } |
| return c; |
| } |
| #endif |
| |
| /* |
| * If eofmark is NULL, read a word or a redirection symbol. If eofmark |
| * is not NULL, read a here document. In the latter case, eofmark is the |
| * word which marks the end of the document and striptabs is true if |
| * leading tabs should be stripped from the document. The argument firstc |
| * is the first character of the input token or document. |
| * |
| * Because C does not have internal subroutines, I have simulated them |
| * using goto's to implement the subroutine linkage. The following macros |
| * will run code that appears at the end of readtoken1. |
| */ |
| #define CHECKEND() {goto checkend; checkend_return:;} |
| #define PARSEREDIR() {goto parseredir; parseredir_return:;} |
| #define PARSESUB() {goto parsesub; parsesub_return:;} |
| #define PARSEBACKQOLD() {oldstyle = 1; goto parsebackq; parsebackq_oldreturn:;} |
| #define PARSEBACKQNEW() {oldstyle = 0; goto parsebackq; parsebackq_newreturn:;} |
| #define PARSEARITH() {goto parsearith; parsearith_return:;} |
| static int |
| readtoken1(int firstc, int syntax, char *eofmark, int striptabs) |
| { |
| /* NB: syntax parameter fits into smallint */ |
| int c = firstc; |
| char *out; |
| int len; |
| char line[EOFMARKLEN + 1]; |
| struct nodelist *bqlist; |
| smallint quotef; |
| smallint dblquote; |
| smallint oldstyle; |
| smallint prevsyntax; /* syntax before arithmetic */ |
| #if ENABLE_ASH_EXPAND_PRMT |
| smallint pssyntax; /* we are expanding a prompt string */ |
| #endif |
| int varnest; /* levels of variables expansion */ |
| int arinest; /* levels of arithmetic expansion */ |
| int parenlevel; /* levels of parens in arithmetic */ |
| int dqvarnest; /* levels of variables expansion within double quotes */ |
| |
| USE_ASH_BASH_COMPAT(smallint bash_dollar_squote = 0;) |
| |
| #if __GNUC__ |
| /* Avoid longjmp clobbering */ |
| (void) &out; |
| (void) "ef; |
| (void) &dblquote; |
| (void) &varnest; |
| (void) &arinest; |
| (void) &parenlevel; |
| (void) &dqvarnest; |
| (void) &oldstyle; |
| (void) &prevsyntax; |
| (void) &syntax; |
| #endif |
| startlinno = plinno; |
| bqlist = NULL; |
| quotef = 0; |
| oldstyle = 0; |
| prevsyntax = 0; |
| #if ENABLE_ASH_EXPAND_PRMT |
| pssyntax = (syntax == PSSYNTAX); |
| if (pssyntax) |
| syntax = DQSYNTAX; |
| #endif |
| dblquote = (syntax == DQSYNTAX); |
| varnest = 0; |
| arinest = 0; |
| parenlevel = 0; |
| dqvarnest = 0; |
| |
| STARTSTACKSTR(out); |
| loop: { /* for each line, until end of word */ |
| CHECKEND(); /* set c to PEOF if at end of here document */ |
| for (;;) { /* until end of line or end of word */ |
| CHECKSTRSPACE(4, out); /* permit 4 calls to USTPUTC */ |
| switch (SIT(c, syntax)) { |
| case CNL: /* '\n' */ |
| if (syntax == BASESYNTAX) |
| goto endword; /* exit outer loop */ |
| USTPUTC(c, out); |
| plinno++; |
| if (doprompt) |
| setprompt(2); |
| c = pgetc(); |
| goto loop; /* continue outer loop */ |
| case CWORD: |
| USTPUTC(c, out); |
| break; |
| case CCTL: |
| if (eofmark == NULL || dblquote) |
| USTPUTC(CTLESC, out); |
| #if ENABLE_ASH_BASH_COMPAT |
| if (c == '\\' && bash_dollar_squote) { |
| c = decode_dollar_squote(); |
| if (c & 0x100) { |
| USTPUTC('\\', out); |
| c = (unsigned char)c; |
| } |
| } |
| #endif |
| USTPUTC(c, out); |
| break; |
| case CBACK: /* backslash */ |
| c = pgetc2(); |
| if (c == PEOF) { |
| USTPUTC(CTLESC, out); |
| USTPUTC('\\', out); |
| pungetc(); |
| } else if (c == '\n') { |
| if (doprompt) |
| setprompt(2); |
| } else { |
| #if ENABLE_ASH_EXPAND_PRMT |
| if (c == '$' && pssyntax) { |
| USTPUTC(CTLESC, out); |
| USTPUTC('\\', out); |
| } |
| #endif |
| if (dblquote && c != '\\' |
| && c != '`' && c != '$' |
| && (c != '"' || eofmark != NULL) |
| ) { |
| USTPUTC(CTLESC, out); |
| USTPUTC('\\', out); |
| } |
| if (SIT(c, SQSYNTAX) == CCTL) |
| USTPUTC(CTLESC, out); |
| USTPUTC(c, out); |
| quotef = 1; |
| } |
| break; |
| case CSQUOTE: |
| syntax = SQSYNTAX; |
| quotemark: |
| if (eofmark == NULL) { |
| USTPUTC(CTLQUOTEMARK, out); |
| } |
| break; |
| case CDQUOTE: |
| syntax = DQSYNTAX; |
| dblquote = 1; |
| goto quotemark; |
| case CENDQUOTE: |
| USE_ASH_BASH_COMPAT(bash_dollar_squote = 0;) |
| if (eofmark != NULL && arinest == 0 |
| && varnest == 0 |
| ) { |
| USTPUTC(c, out); |
| } else { |
| if (dqvarnest == 0) { |
| syntax = BASESYNTAX; |
| dblquote = 0; |
| } |
| quotef = 1; |
| goto quotemark; |
| } |
| break; |
| case CVAR: /* '$' */ |
| PARSESUB(); /* parse substitution */ |
| break; |
| case CENDVAR: /* '}' */ |
| if (varnest > 0) { |
| varnest--; |
| if (dqvarnest > 0) { |
| dqvarnest--; |
| } |
| USTPUTC(CTLENDVAR, out); |
| } else { |
| USTPUTC(c, out); |
| } |
| break; |
| #if ENABLE_ASH_MATH_SUPPORT |
| case CLP: /* '(' in arithmetic */ |
| parenlevel++; |
| USTPUTC(c, out); |
| break; |
| case CRP: /* ')' in arithmetic */ |
| if (parenlevel > 0) { |
| USTPUTC(c, out); |
| --parenlevel; |
| } else { |
| if (pgetc() == ')') { |
| if (--arinest == 0) { |
| USTPUTC(CTLENDARI, out); |
| syntax = prevsyntax; |
| dblquote = (syntax == DQSYNTAX); |
| } else |
| USTPUTC(')', out); |
| } else { |
| /* |
| * unbalanced parens |
| * (don't 2nd guess - no error) |
| */ |
| pungetc(); |
| USTPUTC(')', out); |
| } |
| } |
| break; |
| #endif |
| case CBQUOTE: /* '`' */ |
| PARSEBACKQOLD(); |
| break; |
| case CENDFILE: |
| goto endword; /* exit outer loop */ |
| case CIGN: |
| break; |
| default: |
| if (varnest == 0) |
| goto endword; /* exit outer loop */ |
| #if ENABLE_ASH_ALIAS |
| if (c != PEOA) |
| #endif |
| USTPUTC(c, out); |
| |
| } |
| c = pgetc_macro(); |
| } /* for(;;) */ |
| } |
| endword: |
| #if ENABLE_ASH_MATH_SUPPORT |
| if (syntax == ARISYNTAX) |
| raise_error_syntax("Missing '))'"); |
| #endif |
| if (syntax != BASESYNTAX && !parsebackquote && eofmark == NULL) |
| raise_error_syntax("Unterminated quoted string"); |
| if (varnest != 0) { |
| startlinno = plinno; |
| /* { */ |
| raise_error_syntax("Missing '}'"); |
| } |
| USTPUTC('\0', out); |
| len = out - (char *)stackblock(); |
| out = stackblock(); |
| if (eofmark == NULL) { |
| if ((c == '>' || c == '<') |
| && quotef == 0 |
| && len <= 2 |
| && (*out == '\0' || isdigit(*out)) |
| ) { |
| PARSEREDIR(); |
| lasttoken = TREDIR; |
| return lasttoken; |
| } |
| pungetc(); |
| } |
| quoteflag = quotef; |
| backquotelist = bqlist; |
| grabstackblock(len); |
| wordtext = out; |
| lasttoken = TWORD; |
| return lasttoken; |
| /* end of readtoken routine */ |
| |
| /* |
| * Check to see whether we are at the end of the here document. When this |
| * is called, c is set to the first character of the next input line. If |
| * we are at the end of the here document, this routine sets the c to PEOF. |
| */ |
| checkend: { |
| if (eofmark) { |
| #if ENABLE_ASH_ALIAS |
| if (c == PEOA) { |
| c = pgetc2(); |
| } |
| #endif |
| if (striptabs) { |
| while (c == '\t') { |
| c = pgetc2(); |
| } |
| } |
| if (c == *eofmark) { |
| if (pfgets(line, sizeof(line)) != NULL) { |
| char *p, *q; |
| |
| p = line; |
| for (q = eofmark + 1; *q && *p == *q; p++, q++) |
| continue; |
| if (*p == '\n' && *q == '\0') { |
| c = PEOF; |
| plinno++; |
| needprompt = doprompt; |
| } else { |
| pushstring(line, NULL); |
| } |
| } |
| } |
| } |
| goto checkend_return; |
| } |
| |
| /* |
| * Parse a redirection operator. The variable "out" points to a string |
| * specifying the fd to be redirected. The variable "c" contains the |
| * first character of the redirection operator. |
| */ |
| parseredir: { |
| char fd = *out; |
| union node *np; |
| |
| np = stzalloc(sizeof(struct nfile)); |
| if (c == '>') { |
| np->nfile.fd = 1; |
| c = pgetc(); |
| if (c == '>') |
| np->type = NAPPEND; |
| else if (c == '|') |
| np->type = NCLOBBER; |
| else if (c == '&') |
| np->type = NTOFD; |
| else { |
| np->type = NTO; |
| pungetc(); |
| } |
| } else { /* c == '<' */ |
| /*np->nfile.fd = 0; - stzalloc did it */ |
| c = pgetc(); |
| switch (c) { |
| case '<': |
| if (sizeof(struct nfile) != sizeof(struct nhere)) { |
| np = stzalloc(sizeof(struct nhere)); |
| /*np->nfile.fd = 0; - stzalloc did it */ |
| } |
| np->type = NHERE; |
| heredoc = stzalloc(sizeof(struct heredoc)); |
| heredoc->here = np; |
| c = pgetc(); |
| if (c == '-') { |
| heredoc->striptabs = 1; |
| } else { |
| /*heredoc->striptabs = 0; - stzalloc did it */ |
| pungetc(); |
| } |
| break; |
| |
| case '&': |
| np->type = NFROMFD; |
| break; |
| |
| case '>': |
| np->type = NFROMTO; |
| break; |
| |
| default: |
| np->type = NFROM; |
| pungetc(); |
| break; |
| } |
| } |
| if (fd != '\0') |
| np->nfile.fd = fd - '0'; |
| redirnode = np; |
| goto parseredir_return; |
| } |
| |
| /* |
| * Parse a substitution. At this point, we have read the dollar sign |
| * and nothing else. |
| */ |
| |
| /* is_special(c) evaluates to 1 for c in "!#$*-0123456789?@"; 0 otherwise |
| * (assuming ascii char codes, as the original implementation did) */ |
| #define is_special(c) \ |
| (((unsigned)(c) - 33 < 32) \ |
| && ((0xc1ff920dU >> ((unsigned)(c) - 33)) & 1)) |
| parsesub: { |
| int subtype; |
| int typeloc; |
| int flags; |
| char *p; |
| static const char types[] ALIGN1 = "}-+?="; |
| |
| c = pgetc(); |
| if (c <= PEOA_OR_PEOF |
| || (c != '(' && c != '{' && !is_name(c) && !is_special(c)) |
| ) { |
| #if ENABLE_ASH_BASH_COMPAT |
| if (c == '\'') |
| bash_dollar_squote = 1; |
| else |
| #endif |
| USTPUTC('$', out); |
| pungetc(); |
| } else if (c == '(') { /* $(command) or $((arith)) */ |
| if (pgetc() == '(') { |
| #if ENABLE_ASH_MATH_SUPPORT |
| PARSEARITH(); |
| #else |
| raise_error_syntax("you disabled math support for $((arith)) syntax"); |
| #endif |
| } else { |
| pungetc(); |
| PARSEBACKQNEW(); |
| } |
| } else { |
| USTPUTC(CTLVAR, out); |
| typeloc = out - (char *)stackblock(); |
| USTPUTC(VSNORMAL, out); |
| subtype = VSNORMAL; |
| if (c == '{') { |
| c = pgetc(); |
| if (c == '#') { |
| c = pgetc(); |
| if (c == '}') |
| c = '#'; |
| else |
| subtype = VSLENGTH; |
| } else |
| subtype = 0; |
| } |
| if (c > PEOA_OR_PEOF && is_name(c)) { |
| do { |
| STPUTC(c, out); |
| c = pgetc(); |
| } while (c > PEOA_OR_PEOF && is_in_name(c)); |
| } else if (isdigit(c)) { |
| do { |
| STPUTC(c, out); |
| c = pgetc(); |
| } while (isdigit(c)); |
| } else if (is_special(c)) { |
| USTPUTC(c, out); |
| c = pgetc(); |
| } else |
| badsub: raise_error_syntax("Bad substitution"); |
| |
| STPUTC('=', out); |
| flags = 0; |
| if (subtype == 0) { |
| switch (c) { |
| case ':': |
| c = pgetc(); |
| #if ENABLE_ASH_BASH_COMPAT |
| if (c == ':' || c == '$' || isdigit(c)) { |
| pungetc(); |
| subtype = VSSUBSTR; |
| break; |
| } |
| #endif |
| flags = VSNUL; |
| /*FALLTHROUGH*/ |
| default: |
| p = strchr(types, c); |
| if (p == NULL) |
| goto badsub; |
| subtype = p - types + VSNORMAL; |
| break; |
| case '%': |
| case '#': { |
| int cc = c; |
| subtype = c == '#' ? VSTRIMLEFT : VSTRIMRIGHT; |
| c = pgetc(); |
| if (c == cc) |
| subtype++; |
| else |
| pungetc(); |
| break; |
| } |
| #if ENABLE_ASH_BASH_COMPAT |
| case '/': |
| subtype = VSREPLACE; |
| c = pgetc(); |
| if (c == '/') |
| subtype++; /* VSREPLACEALL */ |
| else |
| pungetc(); |
| break; |
| #endif |
| } |
| } else { |
| pungetc(); |
| } |
| if (dblquote || arinest) |
| flags |= VSQUOTE; |
| *((char *)stackblock() + typeloc) = subtype | flags; |
| if (subtype != VSNORMAL) { |
| varnest++; |
| if (dblquote || arinest) { |
| dqvarnest++; |
| } |
| } |
| } |
| goto parsesub_return; |
| } |
| |
| /* |
| * Called to parse command substitutions. Newstyle is set if the command |
| * is enclosed inside $(...); nlpp is a pointer to the head of the linked |
| * list of commands (passed by reference), and savelen is the number of |
| * characters on the top of the stack which must be preserved. |
| */ |
| parsebackq: { |
| struct nodelist **nlpp; |
| smallint savepbq; |
| union node *n; |
| char *volatile str; |
| struct jmploc jmploc; |
| struct jmploc *volatile savehandler; |
| size_t savelen; |
| smallint saveprompt = 0; |
| |
| #ifdef __GNUC__ |
| (void) &saveprompt; |
| #endif |
| savepbq = parsebackquote; |
| if (setjmp(jmploc.loc)) { |
| free(str); |
| parsebackquote = 0; |
| exception_handler = savehandler; |
| longjmp(exception_handler->loc, 1); |
| } |
| INT_OFF; |
| str = NULL; |
| savelen = out - (char *)stackblock(); |
| if (savelen > 0) { |
| str = ckmalloc(savelen); |
| memcpy(str, stackblock(), savelen); |
| } |
| savehandler = exception_handler; |
| exception_handler = &jmploc; |
| INT_ON; |
| if (oldstyle) { |
| /* We must read until the closing backquote, giving special |
| treatment to some slashes, and then push the string and |
| reread it as input, interpreting it normally. */ |
| char *pout; |
| int pc; |
| size_t psavelen; |
| char *pstr; |
| |
| |
| STARTSTACKSTR(pout); |
| for (;;) { |
| if (needprompt) { |
| setprompt(2); |
| } |
| pc = pgetc(); |
| switch (pc) { |
| case '`': |
| goto done; |
| |
| case '\\': |
| pc = pgetc(); |
| if (pc == '\n') { |
| plinno++; |
| if (doprompt) |
| setprompt(2); |
| /* |
| * If eating a newline, avoid putting |
| * the newline into the new character |
| * stream (via the STPUTC after the |
| * switch). |
| */ |
| continue; |
| } |
| if (pc != '\\' && pc != '`' && pc != '$' |
| && (!dblquote || pc != '"')) |
| STPUTC('\\', pout); |
| if (pc > PEOA_OR_PEOF) { |
| break; |
| } |
| /* fall through */ |
| |
| case PEOF: |
| #if ENABLE_ASH_ALIAS |
| case PEOA: |
| #endif |
| startlinno = plinno; |
| raise_error_syntax("EOF in backquote substitution"); |
| |
| case '\n': |
| plinno++; |
| needprompt = doprompt; |
| break; |
| |
| default: |
| break; |
| } |
| STPUTC(pc, pout); |
| } |
| done: |
| STPUTC('\0', pout); |
| psavelen = pout - (char *)stackblock(); |
| if (psavelen > 0) { |
| pstr = grabstackstr(pout); |
| setinputstring(pstr); |
| } |
| } |
| nlpp = &bqlist; |
| while (*nlpp) |
| nlpp = &(*nlpp)->next; |
| *nlpp = stzalloc(sizeof(**nlpp)); |
| /* (*nlpp)->next = NULL; - stzalloc did it */ |
| parsebackquote = oldstyle; |
| |
| if (oldstyle) { |
| saveprompt = doprompt; |
| doprompt = 0; |
| } |
| |
| n = list(2); |
| |
| if (oldstyle) |
| doprompt = saveprompt; |
| else if (readtoken() != TRP) |
| raise_error_unexpected_syntax(TRP); |
| |
| (*nlpp)->n = n; |
| if (oldstyle) { |
| /* |
| * Start reading from old file again, ignoring any pushed back |
| * tokens left from the backquote parsing |
| */ |
| popfile(); |
| tokpushback = 0; |
| } |
| while (stackblocksize() <= savelen) |
| growstackblock(); |
| STARTSTACKSTR(out); |
| if (str) { |
| memcpy(out, str, savelen); |
| STADJUST(savelen, out); |
| INT_OFF; |
| free(str); |
| str = NULL; |
| INT_ON; |
| } |
| parsebackquote = savepbq; |
| exception_handler = savehandler; |
| if (arinest || dblquote) |
| USTPUTC(CTLBACKQ | CTLQUOTE, out); |
| else |
| USTPUTC(CTLBACKQ, out); |
| if (oldstyle) |
| goto parsebackq_oldreturn; |
| goto parsebackq_newreturn; |
| } |
| |
| #if ENABLE_ASH_MATH_SUPPORT |
| /* |
| * Parse an arithmetic expansion (indicate start of one and set state) |
| */ |
| parsearith: { |
| if (++arinest == 1) { |
| prevsyntax = syntax; |
| syntax = ARISYNTAX; |
| USTPUTC(CTLARI, out); |
| if (dblquote) |
| USTPUTC('"', out); |
| else |
| USTPUTC(' ', out); |
| } else { |
| /* |
| * we collapse embedded arithmetic expansion to |
| * parenthesis, which should be equivalent |
| */ |
| USTPUTC('(', out); |
| } |
| goto parsearith_return; |
| } |
| #endif |
| |
| } /* end of readtoken */ |
| |
| /* |
| * Read the next input token. |
| * If the token is a word, we set backquotelist to the list of cmds in |
| * backquotes. We set quoteflag to true if any part of the word was |
| * quoted. |
| * If the token is TREDIR, then we set redirnode to a structure containing |
| * the redirection. |
| * In all cases, the variable startlinno is set to the number of the line |
| * on which the token starts. |
| * |
| * [Change comment: here documents and internal procedures] |
| * [Readtoken shouldn't have any arguments. Perhaps we should make the |
| * word parsing code into a separate routine. In this case, readtoken |
| * doesn't need to have any internal procedures, but parseword does. |
| * We could also make parseoperator in essence the main routine, and |
| * have parseword (readtoken1?) handle both words and redirection.] |
| */ |
| #define NEW_xxreadtoken |
| #ifdef NEW_xxreadtoken |
| /* singles must be first! */ |
| static const char xxreadtoken_chars[7] ALIGN1 = { |
| '\n', '(', ')', '&', '|', ';', 0 |
| }; |
| |
| static const char xxreadtoken_tokens[] ALIGN1 = { |
| TNL, TLP, TRP, /* only single occurrence allowed */ |
| TBACKGND, TPIPE, TSEMI, /* if single occurrence */ |
| TEOF, /* corresponds to trailing nul */ |
| TAND, TOR, TENDCASE /* if double occurrence */ |
| }; |
| |
| #define xxreadtoken_doubles \ |
| (sizeof(xxreadtoken_tokens) - sizeof(xxreadtoken_chars)) |
| #define xxreadtoken_singles \ |
| (sizeof(xxreadtoken_chars) - xxreadtoken_doubles - 1) |
| |
| static int |
| xxreadtoken(void) |
| { |
| int c; |
| |
| if (tokpushback) { |
| tokpushback = 0; |
| return lasttoken; |
| } |
| if (needprompt) { |
| setprompt(2); |
| } |
| startlinno = plinno; |
| for (;;) { /* until token or start of word found */ |
| c = pgetc_macro(); |
| |
| if ((c != ' ') && (c != '\t') |
| #if ENABLE_ASH_ALIAS |
| && (c != PEOA) |
| #endif |
| ) { |
| if (c == '#') { |
| while ((c = pgetc()) != '\n' && c != PEOF) |
| continue; |
| pungetc(); |
| } else if (c == '\\') { |
| if (pgetc() != '\n') { |
| pungetc(); |
| goto READTOKEN1; |
| } |
| startlinno = ++plinno; |
| if (doprompt) |
| setprompt(2); |
| } else { |
| const char *p |
| = xxreadtoken_chars + sizeof(xxreadtoken_chars) - 1; |
| |
| if (c != PEOF) { |
| if (c == '\n') { |
| plinno++; |
| needprompt = doprompt; |
| } |
| |
| p = strchr(xxreadtoken_chars, c); |
| if (p == NULL) { |
| READTOKEN1: |
| return readtoken1(c, BASESYNTAX, (char *) NULL, 0); |
| } |
| |
| if ((size_t)(p - xxreadtoken_chars) >= xxreadtoken_singles) { |
| if (pgetc() == *p) { /* double occurrence? */ |
| p += xxreadtoken_doubles + 1; |
| } else { |
| pungetc(); |
| } |
| } |
| } |
| lasttoken = xxreadtoken_tokens[p - xxreadtoken_chars]; |
| return lasttoken; |
| } |
| } |
| } /* for */ |
| } |
| #else |
| #define RETURN(token) return lasttoken = token |
| static int |
| xxreadtoken(void) |
| { |
| int c; |
| |
| if (tokpushback) { |
| tokpushback = 0; |
| return lasttoken; |
| } |
| if (needprompt) { |
| setprompt(2); |
| } |
| startlinno = plinno; |
| for (;;) { /* until token or start of word found */ |
| c = pgetc_macro(); |
| switch (c) { |
| case ' ': case '\t': |
| #if ENABLE_ASH_ALIAS |
| case PEOA: |
| #endif |
| continue; |
| case '#': |
| while ((c = pgetc()) != '\n' && c != PEOF) |
| continue; |
| pungetc(); |
| continue; |
| case '\\': |
| if (pgetc() == '\n') { |
| startlinno = ++plinno; |
| if (doprompt) |
| setprompt(2); |
| continue; |
| } |
| pungetc(); |
| goto breakloop; |
| case '\n': |
| plinno++; |
| needprompt = doprompt; |
| RETURN(TNL); |
| case PEOF: |
| RETURN(TEOF); |
| case '&': |
| if (pgetc() == '&') |
| RETURN(TAND); |
| pungetc(); |
| RETURN(TBACKGND); |
| case '|': |
| if (pgetc() == '|') |
| RETURN(TOR); |
| pungetc(); |
| RETURN(TPIPE); |
| case ';': |
| if (pgetc() == ';') |
| RETURN(TENDCASE); |
| pungetc(); |
| RETURN(TSEMI); |
| case '(': |
| RETURN(TLP); |
| case ')': |
| RETURN(TRP); |
| default: |
| goto breakloop; |
| } |
| } |
| breakloop: |
| return readtoken1(c, BASESYNTAX, (char *)NULL, 0); |
| #undef RETURN |
| } |
| #endif /* NEW_xxreadtoken */ |
| |
| static int |
| readtoken(void) |
| { |
| int t; |
| #if DEBUG |
| smallint alreadyseen = tokpushback; |
| #endif |
| |
| #if ENABLE_ASH_ALIAS |
| top: |
| #endif |
| |
| t = xxreadtoken(); |
| |
| /* |
| * eat newlines |
| */ |
| if (checkkwd & CHKNL) { |
| while (t == TNL) { |
| parseheredoc(); |
| t = xxreadtoken(); |
| } |
| } |
| |
| if (t != TWORD || quoteflag) { |
| goto out; |
| } |
| |
| /* |
| * check for keywords |
| */ |
| if (checkkwd & CHKKWD) { |
| const char *const *pp; |
| |
| pp = findkwd(wordtext); |
| if (pp) { |
| lasttoken = t = pp - tokname_array; |
| TRACE(("keyword %s recognized\n", tokname(t))); |
| goto out; |
| } |
| } |
| |
| if (checkkwd & CHKALIAS) { |
| #if ENABLE_ASH_ALIAS |
| struct alias *ap; |
| ap = lookupalias(wordtext, 1); |
| if (ap != NULL) { |
| if (*ap->val) { |
| pushstring(ap->val, ap); |
| } |
| goto top; |
| } |
| #endif |
| } |
| out: |
| checkkwd = 0; |
| #if DEBUG |
| if (!alreadyseen) |
| TRACE(("token %s %s\n", tokname(t), t == TWORD ? wordtext : "")); |
| else |
| TRACE(("reread token %s %s\n", tokname(t), t == TWORD ? wordtext : "")); |
| #endif |
| return t; |
| } |
| |
| static char |
| peektoken(void) |
| { |
| int t; |
| |
| t = readtoken(); |
| tokpushback = 1; |
| return tokname_array[t][0]; |
| } |
| |
| /* |
| * Read and parse a command. Returns NEOF on end of file. (NULL is a |
| * valid parse tree indicating a blank line.) |
| */ |
| static union node * |
| parsecmd(int interact) |
| { |
| int t; |
| |
| tokpushback = 0; |
| doprompt = interact; |
| if (doprompt) |
| setprompt(doprompt); |
| needprompt = 0; |
| t = readtoken(); |
| if (t == TEOF) |
| return NEOF; |
| if (t == TNL) |
| return NULL; |
| tokpushback = 1; |
| return list(1); |
| } |
| |
| /* |
| * Input any here documents. |
| */ |
| static void |
| parseheredoc(void) |
| { |
| struct heredoc *here; |
| union node *n; |
| |
| here = heredoclist; |
| heredoclist = NULL; |
| |
| while (here) { |
| if (needprompt) { |
| setprompt(2); |
| } |
| readtoken1(pgetc(), here->here->type == NHERE? SQSYNTAX : DQSYNTAX, |
| here->eofmark, here->striptabs); |
| n = stzalloc(sizeof(struct narg)); |
| n->narg.type = NARG; |
| /*n->narg.next = NULL; - stzalloc did it */ |
| n->narg.text = wordtext; |
| n->narg.backquote = backquotelist; |
| here->here->nhere.doc = n; |
| here = here->next; |
| } |
| } |
| |
| |
| /* |
| * called by editline -- any expansions to the prompt should be added here. |
| */ |
| #if ENABLE_ASH_EXPAND_PRMT |
| static const char * |
| expandstr(const char *ps) |
| { |
| union node n; |
| |
| /* XXX Fix (char *) cast. */ |
| setinputstring((char *)ps); |
| readtoken1(pgetc(), PSSYNTAX, nullstr, 0); |
| popfile(); |
| |
| n.narg.type = NARG; |
| n.narg.next = NULL; |
| n.narg.text = wordtext; |
| n.narg.backquote = backquotelist; |
| |
| expandarg(&n, NULL, 0); |
| return stackblock(); |
| } |
| #endif |
| |
| /* |
| * Execute a command or commands contained in a string. |
| */ |
| static int |
| evalstring(char *s, int mask) |
| { |
| union node *n; |
| struct stackmark smark; |
| int skip; |
| |
| setinputstring(s); |
| setstackmark(&smark); |
| |
| skip = 0; |
| while ((n = parsecmd(0)) != NEOF) { |
| evaltree(n, 0); |
| popstackmark(&smark); |
| skip = evalskip; |
| if (skip) |
| break; |
| } |
| popfile(); |
| |
| skip &= mask; |
| evalskip = skip; |
| return skip; |
| } |
| |
| /* |
| * The eval command. |
| */ |
| static int |
| evalcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| char *p; |
| char *concat; |
| |
| if (argv[1]) { |
| p = argv[1]; |
| argv += 2; |
| if (argv[0]) { |
| STARTSTACKSTR(concat); |
| for (;;) { |
| concat = stack_putstr(p, concat); |
| p = *argv++; |
| if (p == NULL) |
| break; |
| STPUTC(' ', concat); |
| } |
| STPUTC('\0', concat); |
| p = grabstackstr(concat); |
| } |
| evalstring(p, ~SKIPEVAL); |
| |
| } |
| return exitstatus; |
| } |
| |
| /* |
| * Read and execute commands. "Top" is nonzero for the top level command |
| * loop; it turns on prompting if the shell is interactive. |
| */ |
| static int |
| cmdloop(int top) |
| { |
| union node *n; |
| struct stackmark smark; |
| int inter; |
| int numeof = 0; |
| |
| TRACE(("cmdloop(%d) called\n", top)); |
| for (;;) { |
| int skip; |
| |
| setstackmark(&smark); |
| #if JOBS |
| if (doing_jobctl) |
| showjobs(stderr, SHOW_CHANGED); |
| #endif |
| inter = 0; |
| if (iflag && top) { |
| inter++; |
| #if ENABLE_ASH_MAIL |
| chkmail(); |
| #endif |
| } |
| n = parsecmd(inter); |
| /* showtree(n); DEBUG */ |
| if (n == NEOF) { |
| if (!top || numeof >= 50) |
| break; |
| if (!stoppedjobs()) { |
| if (!Iflag) |
| break; |
| out2str("\nUse \"exit\" to leave shell.\n"); |
| } |
| numeof++; |
| } else if (nflag == 0) { |
| /* job_warning can only be 2,1,0. Here 2->1, 1/0->0 */ |
| job_warning >>= 1; |
| numeof = 0; |
| evaltree(n, 0); |
| } |
| popstackmark(&smark); |
| skip = evalskip; |
| |
| if (skip) { |
| evalskip = 0; |
| return skip & SKIPEVAL; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Take commands from a file. To be compatible we should do a path |
| * search for the file, which is necessary to find sub-commands. |
| */ |
| static char * |
| find_dot_file(char *name) |
| { |
| char *fullname; |
| const char *path = pathval(); |
| struct stat statb; |
| |
| /* don't try this for absolute or relative paths */ |
| if (strchr(name, '/')) |
| return name; |
| |
| while ((fullname = padvance(&path, name)) != NULL) { |
| if ((stat(fullname, &statb) == 0) && S_ISREG(statb.st_mode)) { |
| /* |
| * Don't bother freeing here, since it will |
| * be freed by the caller. |
| */ |
| return fullname; |
| } |
| stunalloc(fullname); |
| } |
| |
| /* not found in the PATH */ |
| ash_msg_and_raise_error("%s: not found", name); |
| /* NOTREACHED */ |
| } |
| |
| static int |
| dotcmd(int argc, char **argv) |
| { |
| struct strlist *sp; |
| volatile struct shparam saveparam; |
| int status = 0; |
| |
| for (sp = cmdenviron; sp; sp = sp->next) |
| setvareq(ckstrdup(sp->text), VSTRFIXED | VTEXTFIXED); |
| |
| if (argv[1]) { /* That's what SVR2 does */ |
| char *fullname = find_dot_file(argv[1]); |
| argv += 2; |
| argc -= 2; |
| if (argc) { /* argc > 0, argv[0] != NULL */ |
| saveparam = shellparam; |
| shellparam.malloced = 0; |
| shellparam.nparam = argc; |
| shellparam.p = argv; |
| }; |
| |
| setinputfile(fullname, INPUT_PUSH_FILE); |
| commandname = fullname; |
| cmdloop(0); |
| popfile(); |
| |
| if (argc) { |
| freeparam(&shellparam); |
| shellparam = saveparam; |
| }; |
| status = exitstatus; |
| } |
| return status; |
| } |
| |
| static int |
| exitcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| if (stoppedjobs()) |
| return 0; |
| if (argv[1]) |
| exitstatus = number(argv[1]); |
| raise_exception(EXEXIT); |
| /* NOTREACHED */ |
| } |
| |
| /* |
| * Read a file containing shell functions. |
| */ |
| static void |
| readcmdfile(char *name) |
| { |
| setinputfile(name, INPUT_PUSH_FILE); |
| cmdloop(0); |
| popfile(); |
| } |
| |
| |
| /* ============ find_command inplementation */ |
| |
| /* |
| * Resolve a command name. If you change this routine, you may have to |
| * change the shellexec routine as well. |
| */ |
| static void |
| find_command(char *name, struct cmdentry *entry, int act, const char *path) |
| { |
| struct tblentry *cmdp; |
| int idx; |
| int prev; |
| char *fullname; |
| struct stat statb; |
| int e; |
| int updatetbl; |
| struct builtincmd *bcmd; |
| |
| /* If name contains a slash, don't use PATH or hash table */ |
| if (strchr(name, '/') != NULL) { |
| entry->u.index = -1; |
| if (act & DO_ABS) { |
| while (stat(name, &statb) < 0) { |
| #ifdef SYSV |
| if (errno == EINTR) |
| continue; |
| #endif |
| entry->cmdtype = CMDUNKNOWN; |
| return; |
| } |
| } |
| entry->cmdtype = CMDNORMAL; |
| return; |
| } |
| |
| /* #if ENABLE_FEATURE_SH_STANDALONE... moved after builtin check */ |
| |
| updatetbl = (path == pathval()); |
| if (!updatetbl) { |
| act |= DO_ALTPATH; |
| if (strstr(path, "%builtin") != NULL) |
| act |= DO_ALTBLTIN; |
| } |
| |
| /* If name is in the table, check answer will be ok */ |
| cmdp = cmdlookup(name, 0); |
| if (cmdp != NULL) { |
| int bit; |
| |
| switch (cmdp->cmdtype) { |
| default: |
| #if DEBUG |
| abort(); |
| #endif |
| case CMDNORMAL: |
| bit = DO_ALTPATH; |
| break; |
| case CMDFUNCTION: |
| bit = DO_NOFUNC; |
| break; |
| case CMDBUILTIN: |
| bit = DO_ALTBLTIN; |
| break; |
| } |
| if (act & bit) { |
| updatetbl = 0; |
| cmdp = NULL; |
| } else if (cmdp->rehash == 0) |
| /* if not invalidated by cd, we're done */ |
| goto success; |
| } |
| |
| /* If %builtin not in path, check for builtin next */ |
| bcmd = find_builtin(name); |
| if (bcmd) { |
| if (IS_BUILTIN_REGULAR(bcmd)) |
| goto builtin_success; |
| if (act & DO_ALTPATH) { |
| if (!(act & DO_ALTBLTIN)) |
| goto builtin_success; |
| } else if (builtinloc <= 0) { |
| goto builtin_success; |
| } |
| } |
| |
| #if ENABLE_FEATURE_SH_STANDALONE |
| { |
| int applet_no = find_applet_by_name(name); |
| if (applet_no >= 0) { |
| entry->cmdtype = CMDNORMAL; |
| entry->u.index = -2 - applet_no; |
| return; |
| } |
| } |
| #endif |
| |
| /* We have to search path. */ |
| prev = -1; /* where to start */ |
| if (cmdp && cmdp->rehash) { /* doing a rehash */ |
| if (cmdp->cmdtype == CMDBUILTIN) |
| prev = builtinloc; |
| else |
| prev = cmdp->param.index; |
| } |
| |
| e = ENOENT; |
| idx = -1; |
| loop: |
| while ((fullname = padvance(&path, name)) != NULL) { |
| stunalloc(fullname); |
| /* NB: code below will still use fullname |
| * despite it being "unallocated" */ |
| idx++; |
| if (pathopt) { |
| if (prefix(pathopt, "builtin")) { |
| if (bcmd) |
| goto builtin_success; |
| continue; |
| } |
| if ((act & DO_NOFUNC) |
| || !prefix(pathopt, "func") |
| ) { /* ignore unimplemented options */ |
| continue; |
| } |
| } |
| /* if rehash, don't redo absolute path names */ |
| if (fullname[0] == '/' && idx <= prev) { |
| if (idx < prev) |
| continue; |
| TRACE(("searchexec \"%s\": no change\n", name)); |
| goto success; |
| } |
| while (stat(fullname, &statb) < 0) { |
| #ifdef SYSV |
| if (errno == EINTR) |
| continue; |
| #endif |
| if (errno != ENOENT && errno != ENOTDIR) |
| e = errno; |
| goto loop; |
| } |
| e = EACCES; /* if we fail, this will be the error */ |
| if (!S_ISREG(statb.st_mode)) |
| continue; |
| if (pathopt) { /* this is a %func directory */ |
| stalloc(strlen(fullname) + 1); |
| /* NB: stalloc will return space pointed by fullname |
| * (because we don't have any intervening allocations |
| * between stunalloc above and this stalloc) */ |
| readcmdfile(fullname); |
| cmdp = cmdlookup(name, 0); |
| if (cmdp == NULL || cmdp->cmdtype != CMDFUNCTION) |
| ash_msg_and_raise_error("%s not defined in %s", name, fullname); |
| stunalloc(fullname); |
| goto success; |
| } |
| TRACE(("searchexec \"%s\" returns \"%s\"\n", name, fullname)); |
| if (!updatetbl) { |
| entry->cmdtype = CMDNORMAL; |
| entry->u.index = idx; |
| return; |
| } |
| INT_OFF; |
| cmdp = cmdlookup(name, 1); |
| cmdp->cmdtype = CMDNORMAL; |
| cmdp->param.index = idx; |
| INT_ON; |
| goto success; |
| } |
| |
| /* We failed. If there was an entry for this command, delete it */ |
| if (cmdp && updatetbl) |
| delete_cmd_entry(); |
| if (act & DO_ERR) |
| ash_msg("%s: %s", name, errmsg(e, "not found")); |
| entry->cmdtype = CMDUNKNOWN; |
| return; |
| |
| builtin_success: |
| if (!updatetbl) { |
| entry->cmdtype = CMDBUILTIN; |
| entry->u.cmd = bcmd; |
| return; |
| } |
| INT_OFF; |
| cmdp = cmdlookup(name, 1); |
| cmdp->cmdtype = CMDBUILTIN; |
| cmdp->param.cmd = bcmd; |
| INT_ON; |
| success: |
| cmdp->rehash = 0; |
| entry->cmdtype = cmdp->cmdtype; |
| entry->u = cmdp->param; |
| } |
| |
| |
| /* ============ trap.c */ |
| |
| /* |
| * The trap builtin. |
| */ |
| static int |
| trapcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| char *action; |
| char **ap; |
| int signo; |
| |
| nextopt(nullstr); |
| ap = argptr; |
| if (!*ap) { |
| for (signo = 0; signo < NSIG; signo++) { |
| if (trap[signo] != NULL) { |
| const char *sn; |
| |
| sn = get_signame(signo); |
| out1fmt("trap -- %s %s\n", |
| single_quote(trap[signo]), sn); |
| } |
| } |
| return 0; |
| } |
| if (!ap[1]) |
| action = NULL; |
| else |
| action = *ap++; |
| while (*ap) { |
| signo = get_signum(*ap); |
| if (signo < 0) |
| ash_msg_and_raise_error("%s: bad trap", *ap); |
| INT_OFF; |
| if (action) { |
| if (LONE_DASH(action)) |
| action = NULL; |
| else |
| action = ckstrdup(action); |
| } |
| free(trap[signo]); |
| trap[signo] = action; |
| if (signo != 0) |
| setsignal(signo); |
| INT_ON; |
| ap++; |
| } |
| return 0; |
| } |
| |
| |
| /* ============ Builtins */ |
| |
| #if !ENABLE_FEATURE_SH_EXTRA_QUIET |
| /* |
| * Lists available builtins |
| */ |
| static int |
| helpcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| unsigned col; |
| unsigned i; |
| |
| out1fmt("\nBuilt-in commands:\n-------------------\n"); |
| for (col = 0, i = 0; i < ARRAY_SIZE(builtintab); i++) { |
| col += out1fmt("%c%s", ((col == 0) ? '\t' : ' '), |
| builtintab[i].name + 1); |
| if (col > 60) { |
| out1fmt("\n"); |
| col = 0; |
| } |
| } |
| #if ENABLE_FEATURE_SH_STANDALONE |
| { |
| const char *a = applet_names; |
| while (*a) { |
| col += out1fmt("%c%s", ((col == 0) ? '\t' : ' '), a); |
| if (col > 60) { |
| out1fmt("\n"); |
| col = 0; |
| } |
| a += strlen(a) + 1; |
| } |
| } |
| #endif |
| out1fmt("\n\n"); |
| return EXIT_SUCCESS; |
| } |
| #endif /* FEATURE_SH_EXTRA_QUIET */ |
| |
| /* |
| * The export and readonly commands. |
| */ |
| static int |
| exportcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| struct var *vp; |
| char *name; |
| const char *p; |
| char **aptr; |
| int flag = argv[0][0] == 'r'? VREADONLY : VEXPORT; |
| |
| if (nextopt("p") != 'p') { |
| aptr = argptr; |
| name = *aptr; |
| if (name) { |
| do { |
| p = strchr(name, '='); |
| if (p != NULL) { |
| p++; |
| } else { |
| vp = *findvar(hashvar(name), name); |
| if (vp) { |
| vp->flags |= flag; |
| continue; |
| } |
| } |
| setvar(name, p, flag); |
| } while ((name = *++aptr) != NULL); |
| return 0; |
| } |
| } |
| showvars(argv[0], flag, 0); |
| return 0; |
| } |
| |
| /* |
| * Delete a function if it exists. |
| */ |
| static void |
| unsetfunc(const char *name) |
| { |
| struct tblentry *cmdp; |
| |
| cmdp = cmdlookup(name, 0); |
| if (cmdp!= NULL && cmdp->cmdtype == CMDFUNCTION) |
| delete_cmd_entry(); |
| } |
| |
| /* |
| * The unset builtin command. We unset the function before we unset the |
| * variable to allow a function to be unset when there is a readonly variable |
| * with the same name. |
| */ |
| static int |
| unsetcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| char **ap; |
| int i; |
| int flag = 0; |
| int ret = 0; |
| |
| while ((i = nextopt("vf")) != '\0') { |
| flag = i; |
| } |
| |
| for (ap = argptr; *ap; ap++) { |
| if (flag != 'f') { |
| i = unsetvar(*ap); |
| ret |= i; |
| if (!(i & 2)) |
| continue; |
| } |
| if (flag != 'v') |
| unsetfunc(*ap); |
| } |
| return ret & 1; |
| } |
| |
| |
| /* setmode.c */ |
| |
| #include <sys/times.h> |
| |
| static const unsigned char timescmd_str[] ALIGN1 = { |
| ' ', offsetof(struct tms, tms_utime), |
| '\n', offsetof(struct tms, tms_stime), |
| ' ', offsetof(struct tms, tms_cutime), |
| '\n', offsetof(struct tms, tms_cstime), |
| 0 |
| }; |
| |
| static int |
| timescmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| long clk_tck, s, t; |
| const unsigned char *p; |
| struct tms buf; |
| |
| clk_tck = sysconf(_SC_CLK_TCK); |
| times(&buf); |
| |
| p = timescmd_str; |
| do { |
| t = *(clock_t *)(((char *) &buf) + p[1]); |
| s = t / clk_tck; |
| out1fmt("%ldm%ld.%.3lds%c", |
| s/60, s%60, |
| ((t - s * clk_tck) * 1000) / clk_tck, |
| p[0]); |
| } while (*(p += 2)); |
| |
| return 0; |
| } |
| |
| #if ENABLE_ASH_MATH_SUPPORT |
| static arith_t |
| dash_arith(const char *s) |
| { |
| arith_t result; |
| int errcode = 0; |
| |
| INT_OFF; |
| result = arith(s, &errcode); |
| if (errcode < 0) { |
| if (errcode == -3) |
| ash_msg_and_raise_error("exponent less than 0"); |
| if (errcode == -2) |
| ash_msg_and_raise_error("divide by zero"); |
| if (errcode == -5) |
| ash_msg_and_raise_error("expression recursion loop detected"); |
| raise_error_syntax(s); |
| } |
| INT_ON; |
| |
| return result; |
| } |
| |
| /* |
| * The let builtin. partial stolen from GNU Bash, the Bourne Again SHell. |
| * Copyright (C) 1987, 1989, 1991 Free Software Foundation, Inc. |
| * |
| * Copyright (C) 2003 Vladimir Oleynik <dzo@simtreas.ru> |
| */ |
| static int |
| letcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| arith_t i; |
| |
| argv++; |
| if (!*argv) |
| ash_msg_and_raise_error("expression expected"); |
| do { |
| i = dash_arith(*argv); |
| } while (*++argv); |
| |
| return !i; |
| } |
| #endif /* ASH_MATH_SUPPORT */ |
| |
| |
| /* ============ miscbltin.c |
| * |
| * Miscellaneous builtins. |
| */ |
| |
| #undef rflag |
| |
| #if defined(__GLIBC__) && __GLIBC__ == 2 && __GLIBC_MINOR__ < 1 |
| typedef enum __rlimit_resource rlim_t; |
| #endif |
| |
| /* |
| * The read builtin. Options: |
| * -r Do not interpret '\' specially |
| * -s Turn off echo (tty only) |
| * -n NCHARS Read NCHARS max |
| * -p PROMPT Display PROMPT on stderr (if input is from tty) |
| * -t SECONDS Timeout after SECONDS (tty or pipe only) |
| * -u FD Read from given FD instead of fd 0 |
| * This uses unbuffered input, which may be avoidable in some cases. |
| * TODO: bash also has: |
| * -a ARRAY Read into array[0],[1],etc |
| * -d DELIM End on DELIM char, not newline |
| * -e Use line editing (tty only) |
| */ |
| static int |
| readcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| static const char *const arg_REPLY[] = { "REPLY", NULL }; |
| |
| char **ap; |
| int backslash; |
| char c; |
| int rflag; |
| char *prompt; |
| const char *ifs; |
| char *p; |
| int startword; |
| int status; |
| int i; |
| int fd = 0; |
| #if ENABLE_ASH_READ_NCHARS |
| int nchars = 0; /* if != 0, -n is in effect */ |
| int silent = 0; |
| struct termios tty, old_tty; |
| #endif |
| #if ENABLE_ASH_READ_TIMEOUT |
| unsigned end_ms = 0; |
| unsigned timeout = 0; |
| #endif |
| |
| rflag = 0; |
| prompt = NULL; |
| while ((i = nextopt("p:u:r" |
| USE_ASH_READ_TIMEOUT("t:") |
| USE_ASH_READ_NCHARS("n:s") |
| )) != '\0') { |
| switch (i) { |
| case 'p': |
| prompt = optionarg; |
| break; |
| #if ENABLE_ASH_READ_NCHARS |
| case 'n': |
| nchars = bb_strtou(optionarg, NULL, 10); |
| if (nchars < 0 || errno) |
| ash_msg_and_raise_error("invalid count"); |
| /* nchars == 0: off (bash 3.2 does this too) */ |
| break; |
| case 's': |
| silent = 1; |
| break; |
| #endif |
| #if ENABLE_ASH_READ_TIMEOUT |
| case 't': |
| timeout = bb_strtou(optionarg, NULL, 10); |
| if (errno || timeout > UINT_MAX / 2048) |
| ash_msg_and_raise_error("invalid timeout"); |
| timeout *= 1000; |
| #if 0 /* even bash have no -t N.NNN support */ |
| ts.tv_sec = bb_strtou(optionarg, &p, 10); |
| ts.tv_usec = 0; |
| /* EINVAL means number is ok, but not terminated by NUL */ |
| if (*p == '.' && errno == EINVAL) { |
| char *p2; |
| if (*++p) { |
| int scale; |
| ts.tv_usec = bb_strtou(p, &p2, 10); |
| if (errno) |
| ash_msg_and_raise_error("invalid timeout"); |
| scale = p2 - p; |
| /* normalize to usec */ |
| if (scale > 6) |
| ash_msg_and_raise_error("invalid timeout"); |
| while (scale++ < 6) |
| ts.tv_usec *= 10; |
| } |
| } else if (ts.tv_sec < 0 || errno) { |
| ash_msg_and_raise_error("invalid timeout"); |
| } |
| if (!(ts.tv_sec | ts.tv_usec)) { /* both are 0? */ |
| ash_msg_and_raise_error("invalid timeout"); |
| } |
| #endif /* if 0 */ |
| break; |
| #endif |
| case 'r': |
| rflag = 1; |
| break; |
| case 'u': |
| fd = bb_strtou(optionarg, NULL, 10); |
| if (fd < 0 || errno) |
| ash_msg_and_raise_error("invalid file descriptor"); |
| break; |
| default: |
| break; |
| } |
| } |
| if (prompt && isatty(fd)) { |
| out2str(prompt); |
| } |
| ap = argptr; |
| if (*ap == NULL) |
| ap = (char**)arg_REPLY; |
| ifs = bltinlookup("IFS"); |
| if (ifs == NULL) |
| ifs = defifs; |
| #if ENABLE_ASH_READ_NCHARS |
| tcgetattr(fd, &tty); |
| old_tty = tty; |
| if (nchars || silent) { |
| if (nchars) { |
| tty.c_lflag &= ~ICANON; |
| tty.c_cc[VMIN] = nchars < 256 ? nchars : 255; |
| } |
| if (silent) { |
| tty.c_lflag &= ~(ECHO | ECHOK | ECHONL); |
| } |
| /* if tcgetattr failed, tcsetattr will fail too. |
| * Ignoring, it's harmless. */ |
| tcsetattr(fd, TCSANOW, &tty); |
| } |
| #endif |
| |
| status = 0; |
| startword = 1; |
| backslash = 0; |
| #if ENABLE_ASH_READ_TIMEOUT |
| if (timeout) /* NB: ensuring end_ms is nonzero */ |
| end_ms = ((unsigned)(monotonic_us() / 1000) + timeout) | 1; |
| #endif |
| STARTSTACKSTR(p); |
| do { |
| #if ENABLE_ASH_READ_TIMEOUT |
| if (end_ms) { |
| struct pollfd pfd[1]; |
| pfd[0].fd = fd; |
| pfd[0].events = POLLIN; |
| timeout = end_ms - (unsigned)(monotonic_us() / 1000); |
| if ((int)timeout <= 0 /* already late? */ |
| || safe_poll(pfd, 1, timeout) != 1 /* no? wait... */ |
| ) { /* timed out! */ |
| #if ENABLE_ASH_READ_NCHARS |
| tcsetattr(fd, TCSANOW, &old_tty); |
| #endif |
| return 1; |
| } |
| } |
| #endif |
| if (nonblock_safe_read(fd, &c, 1) != 1) { |
| status = 1; |
| break; |
| } |
| if (c == '\0') |
| continue; |
| if (backslash) { |
| backslash = 0; |
| if (c != '\n') |
| goto put; |
| continue; |
| } |
| if (!rflag && c == '\\') { |
| backslash++; |
| continue; |
| } |
| if (c == '\n') |
| break; |
| if (startword && *ifs == ' ' && strchr(ifs, c)) { |
| continue; |
| } |
| startword = 0; |
| if (ap[1] != NULL && strchr(ifs, c) != NULL) { |
| STACKSTRNUL(p); |
| setvar(*ap, stackblock(), 0); |
| ap++; |
| startword = 1; |
| STARTSTACKSTR(p); |
| } else { |
| put: |
| STPUTC(c, p); |
| } |
| } |
| /* end of do {} while: */ |
| #if ENABLE_ASH_READ_NCHARS |
| while (--nchars); |
| #else |
| while (1); |
| #endif |
| |
| #if ENABLE_ASH_READ_NCHARS |
| tcsetattr(fd, TCSANOW, &old_tty); |
| #endif |
| |
| STACKSTRNUL(p); |
| /* Remove trailing blanks */ |
| while ((char *)stackblock() <= --p && strchr(ifs, *p) != NULL) |
| *p = '\0'; |
| setvar(*ap, stackblock(), 0); |
| while (*++ap != NULL) |
| setvar(*ap, nullstr, 0); |
| return status; |
| } |
| |
| static int |
| umaskcmd(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| static const char permuser[3] ALIGN1 = "ugo"; |
| static const char permmode[3] ALIGN1 = "rwx"; |
| static const short permmask[] ALIGN2 = { |
| S_IRUSR, S_IWUSR, S_IXUSR, |
| S_IRGRP, S_IWGRP, S_IXGRP, |
| S_IROTH, S_IWOTH, S_IXOTH |
| }; |
| |
| char *ap; |
| mode_t mask; |
| int i; |
| int symbolic_mode = 0; |
| |
| while (nextopt("S") != '\0') { |
| symbolic_mode = 1; |
| } |
| |
| INT_OFF; |
| mask = umask(0); |
| umask(mask); |
| INT_ON; |
| |
| ap = *argptr; |
| if (ap == NULL) { |
| if (symbolic_mode) { |
| char buf[18]; |
| char *p = buf; |
| |
| for (i = 0; i < 3; i++) { |
| int j; |
| |
| *p++ = permuser[i]; |
| *p++ = '='; |
| for (j = 0; j < 3; j++) { |
| if ((mask & permmask[3 * i + j]) == 0) { |
| *p++ = permmode[j]; |
| } |
| } |
| *p++ = ','; |
| } |
| *--p = 0; |
| puts(buf); |
| } else { |
| out1fmt("%.4o\n", mask); |
| } |
| } else { |
| if (isdigit((unsigned char) *ap)) { |
| mask = 0; |
| do { |
| if (*ap >= '8' || *ap < '0') |
| ash_msg_and_raise_error(illnum, argv[1]); |
| mask = (mask << 3) + (*ap - '0'); |
| } while (*++ap != '\0'); |
| umask(mask); |
| } else { |
| mask = ~mask & 0777; |
| if (!bb_parse_mode(ap, &mask)) { |
| ash_msg_and_raise_error("illegal mode: %s", ap); |
| } |
| umask(~mask & 0777); |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * ulimit builtin |
| * |
| * This code, originally by Doug Gwyn, Doug Kingston, Eric Gisin, and |
| * Michael Rendell was ripped from pdksh 5.0.8 and hacked for use with |
| * ash by J.T. Conklin. |
| * |
| * Public domain. |
| */ |
| |
| struct limits { |
| uint8_t cmd; /* RLIMIT_xxx fit into it */ |
| uint8_t factor_shift; /* shift by to get rlim_{cur,max} values */ |
| char option; |
| }; |
| |
| static const struct limits limits_tbl[] = { |
| #ifdef RLIMIT_CPU |
| { RLIMIT_CPU, 0, 't' }, |
| #endif |
| #ifdef RLIMIT_FSIZE |
| { RLIMIT_FSIZE, 9, 'f' }, |
| #endif |
| #ifdef RLIMIT_DATA |
| { RLIMIT_DATA, 10, 'd' }, |
| #endif |
| #ifdef RLIMIT_STACK |
| { RLIMIT_STACK, 10, 's' }, |
| #endif |
| #ifdef RLIMIT_CORE |
| { RLIMIT_CORE, 9, 'c' }, |
| #endif |
| #ifdef RLIMIT_RSS |
| { RLIMIT_RSS, 10, 'm' }, |
| #endif |
| #ifdef RLIMIT_MEMLOCK |
| { RLIMIT_MEMLOCK, 10, 'l' }, |
| #endif |
| #ifdef RLIMIT_NPROC |
| { RLIMIT_NPROC, 0, 'p' }, |
| #endif |
| #ifdef RLIMIT_NOFILE |
| { RLIMIT_NOFILE, 0, 'n' }, |
| #endif |
| #ifdef RLIMIT_AS |
| { RLIMIT_AS, 10, 'v' }, |
| #endif |
| #ifdef RLIMIT_LOCKS |
| { RLIMIT_LOCKS, 0, 'w' }, |
| #endif |
| }; |
| static const char limits_name[] = |
| #ifdef RLIMIT_CPU |
| "time(seconds)" "\0" |
| #endif |
| #ifdef RLIMIT_FSIZE |
| "file(blocks)" "\0" |
| #endif |
| #ifdef RLIMIT_DATA |
| "data(kb)" "\0" |
| #endif |
| #ifdef RLIMIT_STACK |
| "stack(kb)" "\0" |
| #endif |
| #ifdef RLIMIT_CORE |
| "coredump(blocks)" "\0" |
| #endif |
| #ifdef RLIMIT_RSS |
| "memory(kb)" "\0" |
| #endif |
| #ifdef RLIMIT_MEMLOCK |
| "locked memory(kb)" "\0" |
| #endif |
| #ifdef RLIMIT_NPROC |
| "process" "\0" |
| #endif |
| #ifdef RLIMIT_NOFILE |
| "nofiles" "\0" |
| #endif |
| #ifdef RLIMIT_AS |
| "vmemory(kb)" "\0" |
| #endif |
| #ifdef RLIMIT_LOCKS |
| "locks" "\0" |
| #endif |
| ; |
| |
| enum limtype { SOFT = 0x1, HARD = 0x2 }; |
| |
| static void |
| printlim(enum limtype how, const struct rlimit *limit, |
| const struct limits *l) |
| { |
| rlim_t val; |
| |
| val = limit->rlim_max; |
| if (how & SOFT) |
| val = limit->rlim_cur; |
| |
| if (val == RLIM_INFINITY) |
| out1fmt("unlimited\n"); |
| else { |
| val >>= l->factor_shift; |
| out1fmt("%lld\n", (long long) val); |
| } |
| } |
| |
| static int |
| ulimitcmd(int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED) |
| { |
| int c; |
| rlim_t val = 0; |
| enum limtype how = SOFT | HARD; |
| const struct limits *l; |
| int set, all = 0; |
| int optc, what; |
| struct rlimit limit; |
| |
| what = 'f'; |
| while ((optc = nextopt("HSa" |
| #ifdef RLIMIT_CPU |
| "t" |
| #endif |
| #ifdef RLIMIT_FSIZE |
| "f" |
| #endif |
| #ifdef RLIMIT_DATA |
| "d" |
| #endif |
| #ifdef RLIMIT_STACK |
| "s" |
| #endif |
| #ifdef RLIMIT_CORE |
| "c" |
| #endif |
| #ifdef RLIMIT_RSS |
| "m" |
| #endif |
| #ifdef RLIMIT_MEMLOCK |
| "l" |
| #endif |
| #ifdef RLIMIT_NPROC |
| "p" |
| #endif |
| #ifdef RLIMIT_NOFILE |
| "n" |
| #endif |
| #ifdef RLIMIT_AS |
| "v" |
| #endif |
| #ifdef RLIMIT_LOCKS |
| "w" |
| #endif |
| )) != '\0') |
| switch (optc) { |
| case 'H': |
| how = HARD; |
| break; |
| case 'S': |
| how = SOFT; |
| break; |
| case 'a': |
| all = 1; |
| break; |
| default: |
| what = optc; |
| } |
| |
| for (l = limits_tbl; l->option != what; l++) |
| continue; |
| |
| set = *argptr ? 1 : 0; |
| if (set) { |
| char *p = *argptr; |
| |
| if (all || argptr[1]) |
| ash_msg_and_raise_error("too many arguments"); |
| if (strncmp(p, "unlimited\n", 9) == 0) |
| val = RLIM_INFINITY; |
| else { |
| val = (rlim_t) 0; |
| |
| while ((c = *p++) >= '0' && c <= '9') { |
| val = (val * 10) + (long)(c - '0'); |
| // val is actually 'unsigned long int' and can't get < 0 |
| if (val < (rlim_t) 0) |
| break; |
| } |
| if (c) |
| ash_msg_and_raise_error("bad number"); |
| val <<= l->factor_shift; |
| } |
| } |
| if (all) { |
| const char *lname = limits_name; |
| for (l = limits_tbl; l != &limits_tbl[ARRAY_SIZE(limits_tbl)]; l++) { |
| getrlimit(l->cmd, &limit); |
| out1fmt("%-20s ", lname); |
| lname += strlen(lname) + 1; |
| printlim(how, &limit, l); |
| } |
| return 0; |
| } |
| |
| getrlimit(l->cmd, &limit); |
| if (set) { |
| if (how & HARD) |
| limit.rlim_max = val; |
| if (how & SOFT) |
| limit.rlim_cur = val; |
| if (setrlimit(l->cmd, &limit) < 0) |
| ash_msg_and_raise_error("error setting limit (%m)"); |
| } else { |
| printlim(how, &limit, l); |
| } |
| return 0; |
| } |
| |
| |
| /* ============ Math support */ |
| |
| #if ENABLE_ASH_MATH_SUPPORT |
| |
| /* Copyright (c) 2001 Aaron Lehmann <aaronl@vitelus.com> |
| |
| Permission is hereby granted, free of charge, to any person obtaining |
| a copy of this software and associated documentation files (the |
| "Software"), to deal in the Software without restriction, including |
| without limitation the rights to use, copy, modify, merge, publish, |
| distribute, sublicense, and/or sell copies of the Software, and to |
| permit persons to whom the Software is furnished to do so, subject to |
| the following conditions: |
| |
| The above copyright notice and this permission notice shall be |
| included in all copies or substantial portions of the Software. |
| |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY |
| CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /* This is my infix parser/evaluator. It is optimized for size, intended |
| * as a replacement for yacc-based parsers. However, it may well be faster |
| * than a comparable parser written in yacc. The supported operators are |
| * listed in #defines below. Parens, order of operations, and error handling |
| * are supported. This code is thread safe. The exact expression format should |
| * be that which POSIX specifies for shells. */ |
| |
| /* The code uses a simple two-stack algorithm. See |
| * http://www.onthenet.com.au/~grahamis/int2008/week02/lect02.html |
| * for a detailed explanation of the infix-to-postfix algorithm on which |
| * this is based (this code differs in that it applies operators immediately |
| * to the stack instead of adding them to a queue to end up with an |
| * expression). */ |
| |
| /* To use the routine, call it with an expression string and error return |
| * pointer */ |
| |
| /* |
| * Aug 24, 2001 Manuel Novoa III |
| * |
| * Reduced the generated code size by about 30% (i386) and fixed several bugs. |
| * |
| * 1) In arith_apply(): |
| * a) Cached values of *numptr and &(numptr[-1]). |
| * b) Removed redundant test for zero denominator. |
| * |
| * 2) In arith(): |
| * a) Eliminated redundant code for processing operator tokens by moving |
| * to a table-based implementation. Also folded handling of parens |
| * into the table. |
| * b) Combined all 3 loops which called arith_apply to reduce generated |
| * code size at the cost of speed. |
| * |
| * 3) The following expressions were treated as valid by the original code: |
| * 1() , 0! , 1 ( *3 ) . |
| * These bugs have been fixed by internally enclosing the expression in |
| * parens and then checking that all binary ops and right parens are |
| * preceded by a valid expression (NUM_TOKEN). |
| * |
| * Note: It may be desirable to replace Aaron's test for whitespace with |
| * ctype's isspace() if it is used by another busybox applet or if additional |
| * whitespace chars should be considered. Look below the "#include"s for a |
| * precompiler test. |
| */ |
| |
| /* |
| * Aug 26, 2001 Manuel Novoa III |
| * |
| * Return 0 for null expressions. Pointed out by Vladimir Oleynik. |
| * |
| * Merge in Aaron's comments previously posted to the busybox list, |
| * modified slightly to take account of my changes to the code. |
| * |
| */ |
| |
| /* |
| * (C) 2003 Vladimir Oleynik <dzo@simtreas.ru> |
| * |
| * - allow access to variable, |
| * used recursive find value indirection (c=2*2; a="c"; $((a+=2)) produce 6) |
| * - realize assign syntax (VAR=expr, +=, *= etc) |
| * - realize exponentiation (** operator) |
| * - realize comma separated - expr, expr |
| * - realise ++expr --expr expr++ expr-- |
| * - realise expr ? expr : expr (but, second expr calculate always) |
| * - allow hexadecimal and octal numbers |
| * - was restored loses XOR operator |
| * - remove one goto label, added three ;-) |
| * - protect $((num num)) as true zero expr (Manuel`s error) |
| * - always use special isspace(), see comment from bash ;-) |
| */ |
| |
| #define arith_isspace(arithval) \ |
| (arithval == ' ' || arithval == '\n' || arithval == '\t') |
| |
| typedef unsigned char operator; |
| |
| /* An operator's token id is a bit of a bitfield. The lower 5 bits are the |
| * precedence, and 3 high bits are an ID unique across operators of that |
| * precedence. The ID portion is so that multiple operators can have the |
| * same precedence, ensuring that the leftmost one is evaluated first. |
| * Consider * and /. */ |
| |
| #define tok_decl(prec,id) (((id)<<5)|(prec)) |
| #define PREC(op) ((op) & 0x1F) |
| |
| #define TOK_LPAREN tok_decl(0,0) |
| |
| #define TOK_COMMA tok_decl(1,0) |
| |
| #define TOK_ASSIGN tok_decl(2,0) |
| #define TOK_AND_ASSIGN tok_decl(2,1) |
| #define TOK_OR_ASSIGN tok_decl(2,2) |
| #define TOK_XOR_ASSIGN tok_decl(2,3) |
| #define TOK_PLUS_ASSIGN tok_decl(2,4) |
| #define TOK_MINUS_ASSIGN tok_decl(2,5) |
| #define TOK_LSHIFT_ASSIGN tok_decl(2,6) |
| #define TOK_RSHIFT_ASSIGN tok_decl(2,7) |
| |
| #define TOK_MUL_ASSIGN tok_decl(3,0) |
| #define TOK_DIV_ASSIGN tok_decl(3,1) |
| #define TOK_REM_ASSIGN tok_decl(3,2) |
| |
| /* all assign is right associativity and precedence eq, but (7+3)<<5 > 256 */ |
| #define convert_prec_is_assing(prec) do { if (prec == 3) prec = 2; } while (0) |
| |
| /* conditional is right associativity too */ |
| #define TOK_CONDITIONAL tok_decl(4,0) |
| #define TOK_CONDITIONAL_SEP tok_decl(4,1) |
| |
| #define TOK_OR tok_decl(5,0) |
| |
| #define TOK_AND tok_decl(6,0) |
| |
| #define TOK_BOR tok_decl(7,0) |
| |
| #define TOK_BXOR tok_decl(8,0) |
| |
| #define TOK_BAND tok_decl(9,0) |
| |
| #define TOK_EQ tok_decl(10,0) |
| #define TOK_NE tok_decl(10,1) |
| |
| #define TOK_LT tok_decl(11,0) |
| #define TOK_GT tok_decl(11,1) |
| #define TOK_GE tok_decl(11,2) |
| #define TOK_LE tok_decl(11,3) |
| |
| #define TOK_LSHIFT tok_decl(12,0) |
| #define TOK_RSHIFT tok_decl(12,1) |
| |
| #define TOK_ADD tok_decl(13,0) |
| #define TOK_SUB tok_decl(13,1) |
| |
| #define TOK_MUL tok_decl(14,0) |
| #define TOK_DIV tok_decl(14,1) |
| #define TOK_REM tok_decl(14,2) |
| |
| /* exponent is right associativity */ |
| #define TOK_EXPONENT tok_decl(15,1) |
| |
| /* For now unary operators. */ |
| #define UNARYPREC 16 |
| #define TOK_BNOT tok_decl(UNARYPREC,0) |
| #define TOK_NOT tok_decl(UNARYPREC,1) |
| |
| #define TOK_UMINUS tok_decl(UNARYPREC+1,0) |
| #define TOK_UPLUS tok_decl(UNARYPREC+1,1) |
| |
| #define PREC_PRE (UNARYPREC+2) |
| |
| #define TOK_PRE_INC tok_decl(PREC_PRE, 0) |
| #define TOK_PRE_DEC tok_decl(PREC_PRE, 1) |
| |
| #define PREC_POST (UNARYPREC+3) |
| |
| #define TOK_POST_INC tok_decl(PREC_POST, 0) |
| #define TOK_POST_DEC tok_decl(PREC_POST, 1) |
| |
| #define SPEC_PREC (UNARYPREC+4) |
| |
| #define TOK_NUM tok_decl(SPEC_PREC, 0) |
| #define TOK_RPAREN tok_decl(SPEC_PREC, 1) |
| |
| #define NUMPTR (*numstackptr) |
| |
| static int |
| tok_have_assign(operator op) |
| { |
| operator prec = PREC(op); |
| |
| convert_prec_is_assing(prec); |
| return (prec == PREC(TOK_ASSIGN) || |
| prec == PREC_PRE || prec == PREC_POST); |
| } |
| |
| static int |
| is_right_associativity(operator prec) |
| { |
| return (prec == PREC(TOK_ASSIGN) || prec == PREC(TOK_EXPONENT) |
| || prec == PREC(TOK_CONDITIONAL)); |
| } |
| |
| typedef struct { |
| arith_t val; |
| arith_t contidional_second_val; |
| char contidional_second_val_initialized; |
| char *var; /* if NULL then is regular number, |
| else is variable name */ |
| } v_n_t; |
| |
| typedef struct chk_var_recursive_looped_t { |
| const char *var; |
| struct chk_var_recursive_looped_t *next; |
| } chk_var_recursive_looped_t; |
| |
| static chk_var_recursive_looped_t *prev_chk_var_recursive; |
| |
| static int |
| arith_lookup_val(v_n_t *t) |
| { |
| if (t->var) { |
| const char * p = lookupvar(t->var); |
| |
| if (p) { |
| int errcode; |
| |
| /* recursive try as expression */ |
| chk_var_recursive_looped_t *cur; |
| chk_var_recursive_looped_t cur_save; |
| |
| for (cur = prev_chk_var_recursive; cur; cur = cur->next) { |
| if (strcmp(cur->var, t->var) == 0) { |
| /* expression recursion loop detected */ |
| return -5; |
| } |
| } |
| /* save current lookuped var name */ |
| cur = prev_chk_var_recursive; |
| cur_save.var = t->var; |
| cur_save.next = cur; |
| prev_chk_var_recursive = &cur_save; |
| |
| t->val = arith (p, &errcode); |
| /* restore previous ptr after recursiving */ |
| prev_chk_var_recursive = cur; |
| return errcode; |
| } |
| /* allow undefined var as 0 */ |
| t->val = 0; |
| } |
| return 0; |
| } |
| |
| /* "applying" a token means performing it on the top elements on the integer |
| * stack. For a unary operator it will only change the top element, but a |
| * binary operator will pop two arguments and push a result */ |
| static int |
| arith_apply(operator op, v_n_t *numstack, v_n_t **numstackptr) |
| { |
| v_n_t *numptr_m1; |
| arith_t numptr_val, rez; |
| int ret_arith_lookup_val; |
| |
| /* There is no operator that can work without arguments */ |
| if (NUMPTR == numstack) goto err; |
| numptr_m1 = NUMPTR - 1; |
| |
| /* check operand is var with noninteger value */ |
| ret_arith_lookup_val = arith_lookup_val(numptr_m1); |
| if (ret_arith_lookup_val) |
| return ret_arith_lookup_val; |
| |
| rez = numptr_m1->val; |
| if (op == TOK_UMINUS) |
| rez *= -1; |
| else if (op == TOK_NOT) |
| rez = !rez; |
| else if (op == TOK_BNOT) |
| rez = ~rez; |
| else if (op == TOK_POST_INC || op == TOK_PRE_INC) |
| rez++; |
| else if (op == TOK_POST_DEC || op == TOK_PRE_DEC) |
| rez--; |
| else if (op != TOK_UPLUS) { |
| /* Binary operators */ |
| |
| /* check and binary operators need two arguments */ |
| if (numptr_m1 == numstack) goto err; |
| |
| /* ... and they pop one */ |
| --NUMPTR; |
| numptr_val = rez; |
| if (op == TOK_CONDITIONAL) { |
| if (! numptr_m1->contidional_second_val_initialized) { |
| /* protect $((expr1 ? expr2)) without ": expr" */ |
| goto err; |
| } |
| rez = numptr_m1->contidional_second_val; |
| } else if (numptr_m1->contidional_second_val_initialized) { |
| /* protect $((expr1 : expr2)) without "expr ? " */ |
| goto err; |
| } |
| numptr_m1 = NUMPTR - 1; |
| if (op != TOK_ASSIGN) { |
| /* check operand is var with noninteger value for not '=' */ |
| ret_arith_lookup_val = arith_lookup_val(numptr_m1); |
| if (ret_arith_lookup_val) |
| return ret_arith_lookup_val; |
| } |
| if (op == TOK_CONDITIONAL) { |
| numptr_m1->contidional_second_val = rez; |
| } |
| rez = numptr_m1->val; |
| if (op == TOK_BOR || op == TOK_OR_ASSIGN) |
| rez |= numptr_val; |
| else if (op == TOK_OR) |
| rez = numptr_val || rez; |
| else if (op == TOK_BAND || op == TOK_AND_ASSIGN) |
| rez &= numptr_val; |
| else if (op == TOK_BXOR || op == TOK_XOR_ASSIGN) |
| rez ^= numptr_val; |
| else if (op == TOK_AND) |
| rez = rez && numptr_val; |
| else if (op == TOK_EQ) |
| rez = (rez == numptr_val); |
| else if (op == TOK_NE) |
| rez = (rez != numptr_val); |
| else if (op == TOK_GE) |
| rez = (rez >= numptr_val); |
| else if (op == TOK_RSHIFT || op == TOK_RSHIFT_ASSIGN) |
| rez >>= numptr_val; |
| else if (op == TOK_LSHIFT || op == TOK_LSHIFT_ASSIGN) |
| rez <<= numptr_val; |
| else if (op == TOK_GT) |
| rez = (rez > numptr_val); |
| else if (op == TOK_LT) |
| rez = (rez < numptr_val); |
| else if (op == TOK_LE) |
| rez = (rez <= numptr_val); |
| else if (op == TOK_MUL || op == TOK_MUL_ASSIGN) |
| rez *= numptr_val; |
| else if (op == TOK_ADD || op == TOK_PLUS_ASSIGN) |
| rez += numptr_val; |
| else if (op == TOK_SUB || op == TOK_MINUS_ASSIGN) |
| rez -= numptr_val; |
| else if (op == TOK_ASSIGN || op == TOK_COMMA) |
| rez = numptr_val; |
| else if (op == TOK_CONDITIONAL_SEP) { |
| if (numptr_m1 == numstack) { |
| /* protect $((expr : expr)) without "expr ? " */ |
| goto err; |
| } |
| numptr_m1->contidional_second_val_initialized = op; |
| numptr_m1->contidional_second_val = numptr_val; |
| } else if (op == TOK_CONDITIONAL) { |
| rez = rez ? |
| numptr_val : numptr_m1->contidional_second_val; |
| } else if (op == TOK_EXPONENT) { |
| if (numptr_val < 0) |
| return -3; /* exponent less than 0 */ |
| else { |
| arith_t c = 1; |
| |
| if (numptr_val) |
| while (numptr_val--) |
| c *= rez; |
| rez = c; |
| } |
| } else if (numptr_val==0) /* zero divisor check */ |
| return -2; |
| else if (op == TOK_DIV || op == TOK_DIV_ASSIGN) |
| rez /= numptr_val; |
| else if (op == TOK_REM || op == TOK_REM_ASSIGN) |
| rez %= numptr_val; |
| } |
| if (tok_have_assign(op)) { |
| char buf[sizeof(arith_t_type)*3 + 2]; |
| |
| if (numptr_m1->var == NULL) { |
| /* Hmm, 1=2 ? */ |
| goto err; |
| } |
| /* save to shell variable */ |
| #if ENABLE_ASH_MATH_SUPPORT_64 |
| snprintf(buf, sizeof(buf), "%lld", (arith_t_type) rez); |
| #else |
| snprintf(buf, sizeof(buf), "%ld", (arith_t_type) rez); |
| #endif |
| setvar(numptr_m1->var, buf, 0); |
| /* after saving, make previous value for v++ or v-- */ |
| if (op == TOK_POST_INC) |
| rez--; |
| else if (op == TOK_POST_DEC) |
| rez++; |
| } |
| numptr_m1->val = rez; |
| /* protect geting var value, is number now */ |
| numptr_m1->var = NULL; |
| return 0; |
| err: |
| return -1; |
| } |
| |
| /* longest must be first */ |
| static const char op_tokens[] ALIGN1 = { |
| '<','<','=',0, TOK_LSHIFT_ASSIGN, |
| '>','>','=',0, TOK_RSHIFT_ASSIGN, |
| '<','<', 0, TOK_LSHIFT, |
| '>','>', 0, TOK_RSHIFT, |
| '|','|', 0, TOK_OR, |
| '&','&', 0, TOK_AND, |
| '!','=', 0, TOK_NE, |
| '<','=', 0, TOK_LE, |
| '>','=', 0, TOK_GE, |
| '=','=', 0, TOK_EQ, |
| '|','=', 0, TOK_OR_ASSIGN, |
| '&','=', 0, TOK_AND_ASSIGN, |
| '*','=', 0, TOK_MUL_ASSIGN, |
| '/','=', 0, TOK_DIV_ASSIGN, |
| '%','=', 0, TOK_REM_ASSIGN, |
| '+','=', 0, TOK_PLUS_ASSIGN, |
| '-','=', 0, TOK_MINUS_ASSIGN, |
| '-','-', 0, TOK_POST_DEC, |
| '^','=', 0, TOK_XOR_ASSIGN, |
| '+','+', 0, TOK_POST_INC, |
| '*','*', 0, TOK_EXPONENT, |
| '!', 0, TOK_NOT, |
| '<', 0, TOK_LT, |
| '>', 0, TOK_GT, |
| '=', 0, TOK_ASSIGN, |
| '|', 0, TOK_BOR, |
| '&', 0, TOK_BAND, |
| '*', 0, TOK_MUL, |
| '/', 0, TOK_DIV, |
| '%', 0, TOK_REM, |
| '+', 0, TOK_ADD, |
| '-', 0, TOK_SUB, |
| '^', 0, TOK_BXOR, |
| /* uniq */ |
| '~', 0, TOK_BNOT, |
| ',', 0, TOK_COMMA, |
| '?', 0, TOK_CONDITIONAL, |
| ':', 0, TOK_CONDITIONAL_SEP, |
| ')', 0, TOK_RPAREN, |
| '(', 0, TOK_LPAREN, |
| 0 |
| }; |
| /* ptr to ")" */ |
| #define endexpression (&op_tokens[sizeof(op_tokens)-7]) |
| |
| static arith_t |
| arith(const char *expr, int *perrcode) |
| { |
| char arithval; /* Current character under analysis */ |
| operator lasttok, op; |
| operator prec; |
| operator *stack, *stackptr; |
| const char *p = endexpression; |
| int errcode; |
| v_n_t *numstack, *numstackptr; |
| unsigned datasizes = strlen(expr) + 2; |
| |
| /* Stack of integers */ |
| /* The proof that there can be no more than strlen(startbuf)/2+1 integers |
| * in any given correct or incorrect expression is left as an exercise to |
| * the reader. */ |
| numstackptr = numstack = alloca((datasizes / 2) * sizeof(numstack[0])); |
| /* Stack of operator tokens */ |
| stackptr = stack = alloca(datasizes * sizeof(stack[0])); |
| |
| *stackptr++ = lasttok = TOK_LPAREN; /* start off with a left paren */ |
| *perrcode = errcode = 0; |
| |
| while (1) { |
| arithval = *expr; |
| if (arithval == 0) { |
| if (p == endexpression) { |
| /* Null expression. */ |
| return 0; |
| } |
| |
| /* This is only reached after all tokens have been extracted from the |
| * input stream. If there are still tokens on the operator stack, they |
| * are to be applied in order. At the end, there should be a final |
| * result on the integer stack */ |
| |
| if (expr != endexpression + 1) { |
| /* If we haven't done so already, */ |
| /* append a closing right paren */ |
| expr = endexpression; |
| /* and let the loop process it. */ |
| continue; |
| } |
| /* At this point, we're done with the expression. */ |
| if (numstackptr != numstack+1) { |
| /* ... but if there isn't, it's bad */ |
| err: |
| *perrcode = -1; |
| return *perrcode; |
| } |
| if (numstack->var) { |
| /* expression is $((var)) only, lookup now */ |
| errcode = arith_lookup_val(numstack); |
| } |
| ret: |
| *perrcode = errcode; |
| return numstack->val; |
| } |
| |
| /* Continue processing the expression. */ |
| if (arith_isspace(arithval)) { |
| /* Skip whitespace */ |
| goto prologue; |
| } |
| p = endofname(expr); |
| if (p != expr) { |
| size_t var_name_size = (p-expr) + 1; /* trailing zero */ |
| |
| numstackptr->var = alloca(var_name_size); |
| safe_strncpy(numstackptr->var, expr, var_name_size); |
| expr = p; |
| num: |
| numstackptr->contidional_second_val_initialized = 0; |
| numstackptr++; |
| lasttok = TOK_NUM; |
| continue; |
| } |
| if (isdigit(arithval)) { |
| numstackptr->var = NULL; |
| #if ENABLE_ASH_MATH_SUPPORT_64 |
| numstackptr->val = strtoll(expr, (char **) &expr, 0); |
| #else |
| numstackptr->val = strtol(expr, (char **) &expr, 0); |
| #endif |
| goto num; |
| } |
| for (p = op_tokens; ; p++) { |
| const char *o; |
| |
| if (*p == 0) { |
| /* strange operator not found */ |
| goto err; |
| } |
| for (o = expr; *p && *o == *p; p++) |
| o++; |
| if (! *p) { |
| /* found */ |
| expr = o - 1; |
| break; |
| } |
| /* skip tail uncompared token */ |
| while (*p) |
| p++; |
| /* skip zero delim */ |
| p++; |
| } |
| op = p[1]; |
| |
| /* post grammar: a++ reduce to num */ |
| if (lasttok == TOK_POST_INC || lasttok == TOK_POST_DEC) |
| lasttok = TOK_NUM; |
| |
| /* Plus and minus are binary (not unary) _only_ if the last |
| * token was as number, or a right paren (which pretends to be |
| * a number, since it evaluates to one). Think about it. |
| * It makes sense. */ |
| if (lasttok != TOK_NUM) { |
| switch (op) { |
| case TOK_ADD: |
| op = TOK_UPLUS; |
| break; |
| case TOK_SUB: |
| op = TOK_UMINUS; |
| break; |
| case TOK_POST_INC: |
| op = TOK_PRE_INC; |
| break; |
| case TOK_POST_DEC: |
| op = TOK_PRE_DEC; |
| break; |
| } |
| } |
| /* We don't want a unary operator to cause recursive descent on the |
| * stack, because there can be many in a row and it could cause an |
| * operator to be evaluated before its argument is pushed onto the |
| * integer stack. */ |
| /* But for binary operators, "apply" everything on the operator |
| * stack until we find an operator with a lesser priority than the |
| * one we have just extracted. */ |
| /* Left paren is given the lowest priority so it will never be |
| * "applied" in this way. |
| * if associativity is right and priority eq, applied also skip |
| */ |
| prec = PREC(op); |
| if ((prec > 0 && prec < UNARYPREC) || prec == SPEC_PREC) { |
| /* not left paren or unary */ |
| if (lasttok != TOK_NUM) { |
| /* binary op must be preceded by a num */ |
| goto err; |
| } |
| while (stackptr != stack) { |
| if (op == TOK_RPAREN) { |
| /* The algorithm employed here is simple: while we don't |
| * hit an open paren nor the bottom of the stack, pop |
| * tokens and apply them */ |
| if (stackptr[-1] == TOK_LPAREN) { |
| --stackptr; |
| /* Any operator directly after a */ |
| lasttok = TOK_NUM; |
| /* close paren should consider itself binary */ |
| goto prologue; |
| } |
| } else { |
| operator prev_prec = PREC(stackptr[-1]); |
| |
| convert_prec_is_assing(prec); |
| convert_prec_is_assing(prev_prec); |
| if (prev_prec < prec) |
| break; |
| /* check right assoc */ |
| if (prev_prec == prec && is_right_associativity(prec)) |
| break; |
| } |
| errcode = arith_apply(*--stackptr, numstack, &numstackptr); |
| if (errcode) goto ret; |
| } |
| if (op == TOK_RPAREN) { |
| goto err; |
| } |
| } |
| |
| /* Push this operator to the stack and remember it. */ |
| *stackptr++ = lasttok = op; |
| prologue: |
| ++expr; |
| } /* while */ |
| } |
| #endif /* ASH_MATH_SUPPORT */ |
| |
| |
| /* ============ main() and helpers */ |
| |
| /* |
| * Called to exit the shell. |
| */ |
| static void exitshell(void) ATTRIBUTE_NORETURN; |
| static void |
| exitshell(void) |
| { |
| struct jmploc loc; |
| char *p; |
| int status; |
| |
| status = exitstatus; |
| TRACE(("pid %d, exitshell(%d)\n", getpid(), status)); |
| if (setjmp(loc.loc)) { |
| if (exception == EXEXIT) |
| /* dash bug: it just does _exit(exitstatus) here |
| * but we have to do setjobctl(0) first! |
| * (bug is still not fixed in dash-0.5.3 - if you run dash |
| * under Midnight Commander, on exit from dash MC is backgrounded) */ |
| status = exitstatus; |
| goto out; |
| } |
| exception_handler = &loc; |
| p = trap[0]; |
| if (p) { |
| trap[0] = NULL; |
| evalstring(p, 0); |
| } |
| flush_stdout_stderr(); |
| out: |
| setjobctl(0); |
| _exit(status); |
| /* NOTREACHED */ |
| } |
| |
| static void |
| init(void) |
| { |
| /* from input.c: */ |
| basepf.nextc = basepf.buf = basebuf; |
| |
| /* from trap.c: */ |
| signal(SIGCHLD, SIG_DFL); |
| |
| /* from var.c: */ |
| { |
| char **envp; |
| char ppid[sizeof(int)*3 + 1]; |
| const char *p; |
| struct stat st1, st2; |
| |
| initvar(); |
| for (envp = environ; envp && *envp; envp++) { |
| if (strchr(*envp, '=')) { |
| setvareq(*envp, VEXPORT|VTEXTFIXED); |
| } |
| } |
| |
| snprintf(ppid, sizeof(ppid), "%u", (unsigned) getppid()); |
| setvar("PPID", ppid, 0); |
| |
| p = lookupvar("PWD"); |
| if (p) |
| if (*p != '/' || stat(p, &st1) || stat(".", &st2) |
| || st1.st_dev != st2.st_dev || st1.st_ino != st2.st_ino) |
| p = '\0'; |
| setpwd(p, 0); |
| } |
| } |
| |
| /* |
| * Process the shell command line arguments. |
| */ |
| static void |
| procargs(char **argv) |
| { |
| int i; |
| const char *xminusc; |
| char **xargv; |
| |
| xargv = argv; |
| arg0 = xargv[0]; |
| /* if (xargv[0]) - mmm, this is always true! */ |
| xargv++; |
| for (i = 0; i < NOPTS; i++) |
| optlist[i] = 2; |
| argptr = xargv; |
| if (options(1)) { |
| /* it already printed err message */ |
| raise_exception(EXERROR); |
| } |
| xargv = argptr; |
| xminusc = minusc; |
| if (*xargv == NULL) { |
| if (xminusc) |
| ash_msg_and_raise_error(bb_msg_requires_arg, "-c"); |
| sflag = 1; |
| } |
| if (iflag == 2 && sflag == 1 && isatty(0) && isatty(1)) |
| iflag = 1; |
| if (mflag == 2) |
| mflag = iflag; |
| for (i = 0; i < NOPTS; i++) |
| if (optlist[i] == 2) |
| optlist[i] = 0; |
| #if DEBUG == 2 |
| debug = 1; |
| #endif |
| /* POSIX 1003.2: first arg after -c cmd is $0, remainder $1... */ |
| if (xminusc) { |
| minusc = *xargv++; |
| if (*xargv) |
| goto setarg0; |
| } else if (!sflag) { |
| setinputfile(*xargv, 0); |
| setarg0: |
| arg0 = *xargv++; |
| commandname = arg0; |
| } |
| |
| shellparam.p = xargv; |
| #if ENABLE_ASH_GETOPTS |
| shellparam.optind = 1; |
| shellparam.optoff = -1; |
| #endif |
| /* assert(shellparam.malloced == 0 && shellparam.nparam == 0); */ |
| while (*xargv) { |
| shellparam.nparam++; |
| xargv++; |
| } |
| optschanged(); |
| } |
| |
| /* |
| * Read /etc/profile or .profile. |
| */ |
| static void |
| read_profile(const char *name) |
| { |
| int skip; |
| |
| if (setinputfile(name, INPUT_PUSH_FILE | INPUT_NOFILE_OK) < 0) |
| return; |
| skip = cmdloop(0); |
| popfile(); |
| if (skip) |
| exitshell(); |
| } |
| |
| /* |
| * This routine is called when an error or an interrupt occurs in an |
| * interactive shell and control is returned to the main command loop. |
| */ |
| static void |
| reset(void) |
| { |
| /* from eval.c: */ |
| evalskip = 0; |
| loopnest = 0; |
| /* from input.c: */ |
| parselleft = parsenleft = 0; /* clear input buffer */ |
| popallfiles(); |
| /* from parser.c: */ |
| tokpushback = 0; |
| checkkwd = 0; |
| /* from redir.c: */ |
| clearredir(0); |
| } |
| |
| #if PROFILE |
| static short profile_buf[16384]; |
| extern int etext(); |
| #endif |
| |
| /* |
| * Main routine. We initialize things, parse the arguments, execute |
| * profiles if we're a login shell, and then call cmdloop to execute |
| * commands. The setjmp call sets up the location to jump to when an |
| * exception occurs. When an exception occurs the variable "state" |
| * is used to figure out how far we had gotten. |
| */ |
| int ash_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int ash_main(int argc ATTRIBUTE_UNUSED, char **argv) |
| { |
| char *shinit; |
| volatile int state; |
| struct jmploc jmploc; |
| struct stackmark smark; |
| |
| /* Initialize global data */ |
| INIT_G_misc(); |
| INIT_G_memstack(); |
| INIT_G_var(); |
| #if ENABLE_ASH_ALIAS |
| INIT_G_alias(); |
| #endif |
| INIT_G_cmdtable(); |
| |
| #if PROFILE |
| monitor(4, etext, profile_buf, sizeof(profile_buf), 50); |
| #endif |
| |
| #if ENABLE_FEATURE_EDITING |
| line_input_state = new_line_input_t(FOR_SHELL | WITH_PATH_LOOKUP); |
| #endif |
| state = 0; |
| if (setjmp(jmploc.loc)) { |
| int e; |
| int s; |
| |
| reset(); |
| |
| e = exception; |
| if (e == EXERROR) |
| exitstatus = 2; |
| s = state; |
| if (e == EXEXIT || s == 0 || iflag == 0 || shlvl) |
| exitshell(); |
| |
| if (e == EXINT) { |
| outcslow('\n', stderr); |
| } |
| popstackmark(&smark); |
| FORCE_INT_ON; /* enable interrupts */ |
| if (s == 1) |
| goto state1; |
| if (s == 2) |
| goto state2; |
| if (s == 3) |
| goto state3; |
| goto state4; |
| } |
| exception_handler = &jmploc; |
| #if DEBUG |
| opentrace(); |
| trace_puts("Shell args: "); |
| trace_puts_args(argv); |
| #endif |
| rootpid = getpid(); |
| |
| #if ENABLE_ASH_RANDOM_SUPPORT |
| /* Can use monotonic_ns() for better randomness but for now it is |
| * not used anywhere else in busybox... so avoid bloat */ |
| random_galois_LFSR = random_LCG = rootpid + monotonic_us(); |
| #endif |
| init(); |
| setstackmark(&smark); |
| procargs(argv); |
| |
| #if ENABLE_FEATURE_EDITING_SAVEHISTORY |
| if (iflag) { |
| const char *hp = lookupvar("HISTFILE"); |
| |
| if (hp == NULL) { |
| hp = lookupvar("HOME"); |
| if (hp != NULL) { |
| char *defhp = concat_path_file(hp, ".ash_history"); |
| setvar("HISTFILE", defhp, 0); |
| free(defhp); |
| } |
| } |
| } |
| #endif |
| if (argv[0] && argv[0][0] == '-') |
| isloginsh = 1; |
| if (isloginsh) { |
| state = 1; |
| read_profile("/etc/profile"); |
| state1: |
| state = 2; |
| read_profile(".profile"); |
| } |
| state2: |
| state = 3; |
| if ( |
| #ifndef linux |
| getuid() == geteuid() && getgid() == getegid() && |
| #endif |
| iflag |
| ) { |
| shinit = lookupvar("ENV"); |
| if (shinit != NULL && *shinit != '\0') { |
| read_profile(shinit); |
| } |
| } |
| state3: |
| state = 4; |
| if (minusc) |
| evalstring(minusc, 0); |
| |
| if (sflag || minusc == NULL) { |
| #if ENABLE_FEATURE_EDITING_SAVEHISTORY |
| if (iflag) { |
| const char *hp = lookupvar("HISTFILE"); |
| |
| if (hp != NULL) |
| line_input_state->hist_file = hp; |
| } |
| #endif |
| state4: /* XXX ??? - why isn't this before the "if" statement */ |
| cmdloop(1); |
| } |
| #if PROFILE |
| monitor(0); |
| #endif |
| #ifdef GPROF |
| { |
| extern void _mcleanup(void); |
| _mcleanup(); |
| } |
| #endif |
| exitshell(); |
| /* NOTREACHED */ |
| } |
| |
| #if DEBUG |
| const char *applet_name = "debug stuff usage"; |
| int main(int argc, char **argv) |
| { |
| return ash_main(argc, argv); |
| } |
| #endif |
| |
| |
| /*- |
| * Copyright (c) 1989, 1991, 1993, 1994 |
| * The Regents of the University of California. All rights reserved. |
| * |
| * This code is derived from software contributed to Berkeley by |
| * Kenneth Almquist. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the University nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |