| ### # defconfig is allyesconfig minus any features that are specialized enough |
| ### # or cause enough behavior change that the user really should switch them on |
| ### # manually if that's what they want. Sort of "maximum sane config". |
| |
| ### defconfig: scripts/config/conf |
| ### @./scripts/config/conf -y $(CONFIG_CONFIG_IN) > /dev/null |
| ### @$(SED) -i -r -e "s/^(CONFIG_(DEBUG.*|STATIC|SELINUX|NITPICK|BUILD_(AT_ONCE|LIBBUSYBOX)|FEATURE_(DEVFS|FULL_LIBBUSYBOX|SHARED_BUSYBOX|MTAB_SUPPORT|CLEAN_UP|UDHCP_DEBUG)|INSTALL_NO_USR))=.*/# \1 is not set/" .config |
| ### @./scripts/config/conf -o $(CONFIG_CONFIG_IN) > /dev/null |
| |
| ### allbareconfig: scripts/config/conf |
| ### @./scripts/config/conf -y $(CONFIG_CONFIG_IN) > /dev/null |
| ### @$(SED) -i -r -e "s/^(CONFIG_(DEBUG|STATIC|SELINUX|DEVFSD|NC_GAPING_SECURITY_HOLE|BUILD_AT_ONCE)).*/# \1 is not set/" .config |
| ### @$(SED) -i -e "/FEATURE/s/=.*//;/^[^#]/s/.*FEATURE.*/# \0 is not set/;" .config |
| ### @echo "CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y" >> .config |
| ### @yes n | ./scripts/config/conf -o $(CONFIG_CONFIG_IN) > /dev/null |
| |
| ### hosttools: |
| ### $(Q)cp .config .config.bak || noold=yea |
| ### $(Q)$(MAKE) CC="$(HOSTCC)" CFLAGS="$(HOSTCFLAGS) $(INCS)" allnoconfig |
| ### $(Q)mv .config .config.in |
| ### $(Q)(grep -v CONFIG_SED .config.in ; \ |
| ### echo "CONFIG_SED=y" ; ) > .config |
| ### $(Q)$(MAKE) CC="$(HOSTCC)" CFLAGS="$(HOSTCFLAGS) $(INCS)" oldconfig include/bb_config.h |
| ### $(Q)$(MAKE) CC="$(HOSTCC)" CFLAGS="$(HOSTCFLAGS) $(INCS)" busybox |
| ### $(Q)[ -f .config.bak ] && mv .config.bak .config || rm .config |
| ### mv busybox sed |
| ### @echo "Now do: $(MAKE) SED=$(objtree)/sed <target>" |
| |
| %.bflt: %_unstripped |
| $(CROSS_COMPILE)elf2flt $(ELF2FLTFLAGS) $< -o $@ |
| |
| busybox.links: $(srctree)/applets/busybox.mkll include/bb_config.h $(srctree)/include/applets.h |
| $(Q)-$(SHELL) $^ >$@ |
| |
| .PHONY: install |
| install: $(srctree)/applets/install.sh busybox busybox.links |
| $(Q)DO_INSTALL_LIBS="$(strip $(LIBBUSYBOX_SONAME) $(DO_INSTALL_LIBS))" \ |
| $(SHELL) $< $(CONFIG_PREFIX) $(INSTALL_OPTS) |
| ifeq ($(strip $(CONFIG_FEATURE_SUID)),y) |
| @echo |
| @echo |
| @echo -------------------------------------------------- |
| @echo You will probably need to make your busybox binary |
| @echo setuid root to ensure all configured applets will |
| @echo work properly. |
| @echo -------------------------------------------------- |
| @echo |
| endif |
| |
| uninstall: busybox.links |
| rm -f $(CONFIG_PREFIX)/bin/busybox |
| for i in `cat busybox.links` ; do rm -f $(CONFIG_PREFIX)$$i; done |
| ifneq ($(strip $(DO_INSTALL_LIBS)),n) |
| for i in $(LIBBUSYBOX_SONAME) $(DO_INSTALL_LIBS); do \ |
| rm -f $(CONFIG_PREFIX)$$i; \ |
| done |
| endif |
| |
| check test: busybox |
| bindir=$(objtree) srcdir=$(srctree)/testsuite SED="$(SED)" \ |
| $(SHELL) $(srctree)/testsuite/runtest $(if $(KBUILD_VERBOSE:1=),-v) |
| |
| ### checkhelp: |
| ### $(Q)$(srctree)/scripts/checkhelp.awk \ |
| ### $(wildcard $(patsubst %,%/Config.in,$(SRC_DIRS) ./)) |
| |
| .PHONY: sizes |
| sizes: busybox_unstripped |
| $(NM) --size-sort $(<) |
| |
| .PHONY: bloatcheck |
| bloatcheck: busybox_old busybox_unstripped |
| @$(srctree)/scripts/bloat-o-meter busybox_old busybox_unstripped |
| |
| .PHONY: baseline |
| baseline: busybox_unstripped |
| @mv busybox_unstripped busybox_old |
| |
| .PHONY: objsizes |
| objsizes: busybox_unstripped |
| $(srctree)/scripts/objsizes |
| |
| # Documentation Targets |
| .PHONY: doc |
| doc: docs/busybox.pod docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html |
| |
| docs/busybox.pod: $(srctree)/docs/busybox_header.pod \ |
| $(srctree)/include/usage.h \ |
| $(srctree)/docs/busybox_footer.pod \ |
| $(srctree)/docs/autodocifier.pl |
| $(disp_doc) |
| $(Q)-mkdir -p docs |
| $(Q)-( cat $(srctree)/docs/busybox_header.pod ; \ |
| $(srctree)/docs/autodocifier.pl $(srctree)/include/usage.h ; \ |
| cat $(srctree)/docs/busybox_footer.pod ; ) > docs/busybox.pod |
| |
| docs/BusyBox.txt: docs/busybox.pod |
| $(disp_doc) |
| $(Q)-mkdir -p docs |
| $(Q)-pod2text $< > $@ |
| |
| docs/BusyBox.1: docs/busybox.pod |
| $(disp_doc) |
| $(Q)-mkdir -p docs |
| $(Q)-pod2man --center=BusyBox --release="version $(VERSION)" \ |
| $< > $@ |
| |
| docs/BusyBox.html: docs/busybox.net/BusyBox.html |
| $(disp_doc) |
| $(Q)-mkdir -p docs |
| $(Q)-rm -f docs/BusyBox.html |
| $(Q)-cp docs/busybox.net/BusyBox.html docs/BusyBox.html |
| |
| docs/busybox.net/BusyBox.html: docs/busybox.pod |
| $(Q)-mkdir -p docs/busybox.net |
| $(Q)-pod2html --noindex $< > \ |
| docs/busybox.net/BusyBox.html |
| $(Q)-rm -f pod2htm* |
| |
| # documentation, cross-reference |
| # Modern distributions already ship synopsis packages (e.g. debian) |
| # If you have an old distribution go to http://synopsis.fresco.org/ |
| syn_tgt := $(wildcard $(patsubst %,%/*.c,$(SRC_DIRS))) |
| syn := $(patsubst %.c, %.syn, $(syn_tgt)) |
| |
| %.syn: %.c |
| synopsis -p C -l Comments.SSDFilter,Comments.Previous $(INCS) -Wp,verbose,debug,preprocess,cppflags="'$(CFLAGS) $(EXTRA_CFLAGS) $(LDFLAGS) $(PROG_CFLAGS) $(PROG_LDFLAGS) $(CFLAGS_COMBINE) $(APPLETS_DEFINE) $(BUSYBOX_DEFINE)'" -o $@ $< |
| |
| .PHONY: html |
| html: $(syn) |
| synopsis -f HTML -Wf,title="'BusyBox Documentation'" -o $@ $^ |