| /* vi: set sw=4 ts=4: */ |
| /* |
| * A simple tftp client/server for busybox. |
| * Tries to follow RFC1350. |
| * Only "octet" mode supported. |
| * Optional blocksize negotiation (RFC2347 + RFC2348) |
| * |
| * Copyright (C) 2001 Magnus Damm <damm@opensource.se> |
| * |
| * Parts of the code based on: |
| * |
| * atftp: Copyright (C) 2000 Jean-Pierre Lefebvre <helix@step.polymtl.ca> |
| * and Remi Lefebvre <remi@debian.org> |
| * |
| * utftp: Copyright (C) 1999 Uwe Ohse <uwe@ohse.de> |
| * |
| * tftpd added by Denys Vlasenko & Vladimir Dronnikov |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| |
| //usage:#define tftp_trivial_usage |
| //usage: "[OPTIONS] HOST [PORT]" |
| //usage:#define tftp_full_usage "\n\n" |
| //usage: "Transfer a file from/to tftp server\n" |
| //usage: "\n -l FILE Local FILE" |
| //usage: "\n -r FILE Remote FILE" |
| //usage: IF_FEATURE_TFTP_GET( |
| //usage: "\n -g Get file" |
| //usage: ) |
| //usage: IF_FEATURE_TFTP_PUT( |
| //usage: "\n -p Put file" |
| //usage: ) |
| //usage: IF_FEATURE_TFTP_BLOCKSIZE( |
| //usage: "\n -b SIZE Transfer blocks of SIZE octets" |
| //usage: ) |
| //usage: |
| //usage:#define tftpd_trivial_usage |
| //usage: "[-cr] [-u USER] [DIR]" |
| //usage:#define tftpd_full_usage "\n\n" |
| //usage: "Transfer a file on tftp client's request\n" |
| //usage: "\n" |
| //usage: "tftpd should be used as an inetd service.\n" |
| //usage: "tftpd's line for inetd.conf:\n" |
| //usage: " 69 dgram udp nowait root tftpd tftpd -l /files/to/serve\n" |
| //usage: "It also can be ran from udpsvd:\n" |
| //usage: " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" |
| //usage: "\n -r Prohibit upload" |
| //usage: "\n -c Allow file creation via upload" |
| //usage: "\n -u Access files as USER" |
| //usage: "\n -l Log to syslog (inetd mode requires this)" |
| |
| #include "libbb.h" |
| #include <syslog.h> |
| |
| #if ENABLE_FEATURE_TFTP_GET || ENABLE_FEATURE_TFTP_PUT |
| |
| #define TFTP_BLKSIZE_DEFAULT 512 /* according to RFC 1350, don't change */ |
| #define TFTP_BLKSIZE_DEFAULT_STR "512" |
| /* Was 50 ms but users asked to bump it up a bit */ |
| #define TFTP_TIMEOUT_MS 100 |
| #define TFTP_MAXTIMEOUT_MS 2000 |
| #define TFTP_NUM_RETRIES 12 /* number of backed-off retries */ |
| |
| /* opcodes we support */ |
| #define TFTP_RRQ 1 |
| #define TFTP_WRQ 2 |
| #define TFTP_DATA 3 |
| #define TFTP_ACK 4 |
| #define TFTP_ERROR 5 |
| #define TFTP_OACK 6 |
| |
| /* error codes sent over network (we use only 0, 1, 3 and 8) */ |
| /* generic (error message is included in the packet) */ |
| #define ERR_UNSPEC 0 |
| #define ERR_NOFILE 1 |
| #define ERR_ACCESS 2 |
| /* disk full or allocation exceeded */ |
| #define ERR_WRITE 3 |
| #define ERR_OP 4 |
| #define ERR_BAD_ID 5 |
| #define ERR_EXIST 6 |
| #define ERR_BAD_USER 7 |
| #define ERR_BAD_OPT 8 |
| |
| /* masks coming from getopt32 */ |
| enum { |
| TFTP_OPT_GET = (1 << 0), |
| TFTP_OPT_PUT = (1 << 1), |
| /* pseudo option: if set, it's tftpd */ |
| TFTPD_OPT = (1 << 7) * ENABLE_TFTPD, |
| TFTPD_OPT_r = (1 << 8) * ENABLE_TFTPD, |
| TFTPD_OPT_c = (1 << 9) * ENABLE_TFTPD, |
| TFTPD_OPT_u = (1 << 10) * ENABLE_TFTPD, |
| TFTPD_OPT_l = (1 << 11) * ENABLE_TFTPD, |
| }; |
| |
| #if ENABLE_FEATURE_TFTP_GET && !ENABLE_FEATURE_TFTP_PUT |
| #define IF_GETPUT(...) |
| #define CMD_GET(cmd) 1 |
| #define CMD_PUT(cmd) 0 |
| #elif !ENABLE_FEATURE_TFTP_GET && ENABLE_FEATURE_TFTP_PUT |
| #define IF_GETPUT(...) |
| #define CMD_GET(cmd) 0 |
| #define CMD_PUT(cmd) 1 |
| #else |
| #define IF_GETPUT(...) __VA_ARGS__ |
| #define CMD_GET(cmd) ((cmd) & TFTP_OPT_GET) |
| #define CMD_PUT(cmd) ((cmd) & TFTP_OPT_PUT) |
| #endif |
| /* NB: in the code below |
| * CMD_GET(cmd) and CMD_PUT(cmd) are mutually exclusive |
| */ |
| |
| |
| struct globals { |
| /* u16 TFTP_ERROR; u16 reason; both network-endian, then error text: */ |
| uint8_t error_pkt[4 + 32]; |
| struct passwd *pw; |
| /* Used in tftpd_main() for initial packet */ |
| /* Some HP PA-RISC firmware always sends fixed 516-byte requests */ |
| char block_buf[516]; |
| char block_buf_tail[1]; |
| #if ENABLE_FEATURE_TFTP_PROGRESS_BAR |
| off_t pos; |
| off_t size; |
| const char *file; |
| bb_progress_t pmt; |
| #endif |
| } FIX_ALIASING; |
| #define G (*(struct globals*)&bb_common_bufsiz1) |
| struct BUG_G_too_big { |
| char BUG_G_too_big[sizeof(G) <= COMMON_BUFSIZE ? 1 : -1]; |
| }; |
| #define INIT_G() do { } while (0) |
| |
| #define G_error_pkt_reason (G.error_pkt[3]) |
| #define G_error_pkt_str ((char*)(G.error_pkt + 4)) |
| |
| #if ENABLE_FEATURE_TFTP_PROGRESS_BAR |
| static void tftp_progress_update(void) |
| { |
| bb_progress_update(&G.pmt, 0, G.pos, G.size); |
| } |
| static void tftp_progress_init(void) |
| { |
| bb_progress_init(&G.pmt, G.file); |
| tftp_progress_update(); |
| } |
| static void tftp_progress_done(void) |
| { |
| if (is_bb_progress_inited(&G.pmt)) { |
| tftp_progress_update(); |
| bb_putchar_stderr('\n'); |
| bb_progress_free(&G.pmt); |
| } |
| } |
| #else |
| # define tftp_progress_init() ((void)0) |
| # define tftp_progress_done() ((void)0) |
| #endif |
| |
| #if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| |
| static int tftp_blksize_check(const char *blksize_str, int maxsize) |
| { |
| /* Check if the blksize is valid: |
| * RFC2348 says between 8 and 65464, |
| * but our implementation makes it impossible |
| * to use blksizes smaller than 22 octets. */ |
| unsigned blksize = bb_strtou(blksize_str, NULL, 10); |
| if (errno |
| || (blksize < 24) || (blksize > maxsize) |
| ) { |
| bb_error_msg("bad blocksize '%s'", blksize_str); |
| return -1; |
| } |
| # if ENABLE_TFTP_DEBUG |
| bb_error_msg("using blksize %u", blksize); |
| # endif |
| return blksize; |
| } |
| |
| static char *tftp_get_option(const char *option, char *buf, int len) |
| { |
| int opt_val = 0; |
| int opt_found = 0; |
| int k; |
| |
| /* buf points to: |
| * "opt_name<NUL>opt_val<NUL>opt_name2<NUL>opt_val2<NUL>..." */ |
| |
| while (len > 0) { |
| /* Make sure options are terminated correctly */ |
| for (k = 0; k < len; k++) { |
| if (buf[k] == '\0') { |
| goto nul_found; |
| } |
| } |
| return NULL; |
| nul_found: |
| if (opt_val == 0) { /* it's "name" part */ |
| if (strcasecmp(buf, option) == 0) { |
| opt_found = 1; |
| } |
| } else if (opt_found) { |
| return buf; |
| } |
| |
| k++; |
| buf += k; |
| len -= k; |
| opt_val ^= 1; |
| } |
| |
| return NULL; |
| } |
| |
| #endif |
| |
| static int tftp_protocol( |
| /* NULL if tftp, !NULL if tftpd: */ |
| len_and_sockaddr *our_lsa, |
| len_and_sockaddr *peer_lsa, |
| const char *local_file |
| IF_TFTP(, const char *remote_file) |
| #if !ENABLE_TFTP |
| # define remote_file NULL |
| #endif |
| /* 1 for tftp; 1/0 for tftpd depending whether client asked about it: */ |
| IF_FEATURE_TFTP_BLOCKSIZE(, int want_transfer_size) |
| IF_FEATURE_TFTP_BLOCKSIZE(, int blksize)) |
| { |
| #if !ENABLE_FEATURE_TFTP_BLOCKSIZE |
| enum { blksize = TFTP_BLKSIZE_DEFAULT }; |
| #endif |
| |
| struct pollfd pfd[1]; |
| #define socket_fd (pfd[0].fd) |
| int len; |
| int send_len; |
| IF_FEATURE_TFTP_BLOCKSIZE(smallint expect_OACK = 0;) |
| smallint finished = 0; |
| uint16_t opcode; |
| uint16_t block_nr; |
| uint16_t recv_blk; |
| int open_mode, local_fd; |
| int retries, waittime_ms; |
| int io_bufsize = blksize + 4; |
| char *cp; |
| /* Can't use RESERVE_CONFIG_BUFFER here since the allocation |
| * size varies meaning BUFFERS_GO_ON_STACK would fail. |
| * |
| * We must keep the transmit and receive buffers separate |
| * in case we rcv a garbage pkt - we need to rexmit the last pkt. |
| */ |
| char *xbuf = xmalloc(io_bufsize); |
| char *rbuf = xmalloc(io_bufsize); |
| |
| socket_fd = xsocket(peer_lsa->u.sa.sa_family, SOCK_DGRAM, 0); |
| setsockopt_reuseaddr(socket_fd); |
| |
| if (!ENABLE_TFTP || our_lsa) { /* tftpd */ |
| /* Create a socket which is: |
| * 1. bound to IP:port peer sent 1st datagram to, |
| * 2. connected to peer's IP:port |
| * This way we will answer from the IP:port peer |
| * expects, will not get any other packets on |
| * the socket, and also plain read/write will work. */ |
| xbind(socket_fd, &our_lsa->u.sa, our_lsa->len); |
| xconnect(socket_fd, &peer_lsa->u.sa, peer_lsa->len); |
| |
| /* Is there an error already? Send pkt and bail out */ |
| if (G_error_pkt_reason || G_error_pkt_str[0]) |
| goto send_err_pkt; |
| |
| if (G.pw) { |
| change_identity(G.pw); /* initgroups, setgid, setuid */ |
| } |
| } |
| |
| /* Prepare open mode */ |
| if (CMD_PUT(option_mask32)) { |
| open_mode = O_RDONLY; |
| } else { |
| open_mode = O_WRONLY | O_TRUNC | O_CREAT; |
| #if ENABLE_TFTPD |
| if ((option_mask32 & (TFTPD_OPT+TFTPD_OPT_c)) == TFTPD_OPT) { |
| /* tftpd without -c */ |
| open_mode = O_WRONLY | O_TRUNC; |
| } |
| #endif |
| } |
| |
| /* Examples of network traffic. |
| * Note two cases when ACKs with block# of 0 are sent. |
| * |
| * Download without options: |
| * tftp -> "\0\1FILENAME\0octet\0" |
| * "\0\3\0\1FILEDATA..." <- tftpd |
| * tftp -> "\0\4\0\1" |
| * ... |
| * Download with option of blksize 16384: |
| * tftp -> "\0\1FILENAME\0octet\0blksize\00016384\0" |
| * "\0\6blksize\00016384\0" <- tftpd |
| * tftp -> "\0\4\0\0" |
| * "\0\3\0\1FILEDATA..." <- tftpd |
| * tftp -> "\0\4\0\1" |
| * ... |
| * Upload without options: |
| * tftp -> "\0\2FILENAME\0octet\0" |
| * "\0\4\0\0" <- tftpd |
| * tftp -> "\0\3\0\1FILEDATA..." |
| * "\0\4\0\1" <- tftpd |
| * ... |
| * Upload with option of blksize 16384: |
| * tftp -> "\0\2FILENAME\0octet\0blksize\00016384\0" |
| * "\0\6blksize\00016384\0" <- tftpd |
| * tftp -> "\0\3\0\1FILEDATA..." |
| * "\0\4\0\1" <- tftpd |
| * ... |
| */ |
| block_nr = 1; |
| cp = xbuf + 2; |
| |
| if (!ENABLE_TFTP || our_lsa) { /* tftpd */ |
| /* Open file (must be after changing user) */ |
| local_fd = open(local_file, open_mode, 0666); |
| if (local_fd < 0) { |
| G_error_pkt_reason = ERR_NOFILE; |
| strcpy(G_error_pkt_str, "can't open file"); |
| goto send_err_pkt; |
| } |
| /* gcc 4.3.1 would NOT optimize it out as it should! */ |
| #if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| if (blksize != TFTP_BLKSIZE_DEFAULT || want_transfer_size) { |
| /* Create and send OACK packet. */ |
| /* For the download case, block_nr is still 1 - |
| * we expect 1st ACK from peer to be for (block_nr-1), |
| * that is, for "block 0" which is our OACK pkt */ |
| opcode = TFTP_OACK; |
| goto add_blksize_opt; |
| } |
| #endif |
| if (CMD_GET(option_mask32)) { |
| /* It's upload and we don't send OACK. |
| * We must ACK 1st packet (with filename) |
| * as if it is "block 0" */ |
| block_nr = 0; |
| } |
| } else { /* tftp */ |
| /* Open file (must be after changing user) */ |
| local_fd = CMD_GET(option_mask32) ? STDOUT_FILENO : STDIN_FILENO; |
| if (NOT_LONE_DASH(local_file)) |
| local_fd = xopen(local_file, open_mode); |
| /* Removing #if, or using if() statement instead of #if may lead to |
| * "warning: null argument where non-null required": */ |
| #if ENABLE_TFTP |
| /* tftp */ |
| |
| /* We can't (and don't really need to) bind the socket: |
| * we don't know from which local IP datagrams will be sent, |
| * but kernel will pick the same IP every time (unless routing |
| * table is changed), thus peer will see dgrams consistently |
| * coming from the same IP. |
| * We would like to connect the socket, but since peer's |
| * UDP code can be less perfect than ours, _peer's_ IP:port |
| * in replies may differ from IP:port we used to send |
| * our first packet. We can connect() only when we get |
| * first reply. */ |
| |
| /* build opcode */ |
| opcode = TFTP_WRQ; |
| if (CMD_GET(option_mask32)) { |
| opcode = TFTP_RRQ; |
| } |
| /* add filename and mode */ |
| /* fill in packet if the filename fits into xbuf */ |
| len = strlen(remote_file) + 1; |
| if (2 + len + sizeof("octet") >= io_bufsize) { |
| bb_error_msg("remote filename is too long"); |
| goto ret; |
| } |
| strcpy(cp, remote_file); |
| cp += len; |
| /* add "mode" part of the packet */ |
| strcpy(cp, "octet"); |
| cp += sizeof("octet"); |
| |
| # if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| if (blksize == TFTP_BLKSIZE_DEFAULT && !want_transfer_size) |
| goto send_pkt; |
| |
| /* Need to add option to pkt */ |
| if ((&xbuf[io_bufsize - 1] - cp) < sizeof("blksize NNNNN tsize ") + sizeof(off_t)*3) { |
| bb_error_msg("remote filename is too long"); |
| goto ret; |
| } |
| expect_OACK = 1; |
| # endif |
| #endif /* ENABLE_TFTP */ |
| |
| #if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| add_blksize_opt: |
| if (blksize != TFTP_BLKSIZE_DEFAULT) { |
| /* add "blksize", <nul>, blksize, <nul> */ |
| strcpy(cp, "blksize"); |
| cp += sizeof("blksize"); |
| cp += snprintf(cp, 6, "%d", blksize) + 1; |
| } |
| if (want_transfer_size) { |
| /* add "tsize", <nul>, size, <nul> (see RFC2349) */ |
| /* if tftp and downloading, we send "0" (since we opened local_fd with O_TRUNC) |
| * and this makes server to send "tsize" option with the size */ |
| /* if tftp and uploading, we send file size (maybe dont, to not confuse old servers???) */ |
| /* if tftpd and downloading, we are answering to client's request */ |
| /* if tftpd and uploading: !want_transfer_size, this code is not executed */ |
| struct stat st; |
| strcpy(cp, "tsize"); |
| cp += sizeof("tsize"); |
| st.st_size = 0; |
| fstat(local_fd, &st); |
| cp += sprintf(cp, "%"OFF_FMT"u", (off_t)st.st_size) + 1; |
| # if ENABLE_FEATURE_TFTP_PROGRESS_BAR |
| /* Save for progress bar. If 0 (tftp downloading), |
| * we look at server's reply later */ |
| G.size = st.st_size; |
| if (remote_file && st.st_size) |
| tftp_progress_init(); |
| # endif |
| } |
| #endif |
| /* First packet is built, so skip packet generation */ |
| goto send_pkt; |
| } |
| |
| /* Using mostly goto's - continue/break will be less clear |
| * in where we actually jump to */ |
| while (1) { |
| /* Build ACK or DATA */ |
| cp = xbuf + 2; |
| *((uint16_t*)cp) = htons(block_nr); |
| cp += 2; |
| block_nr++; |
| opcode = TFTP_ACK; |
| if (CMD_PUT(option_mask32)) { |
| opcode = TFTP_DATA; |
| len = full_read(local_fd, cp, blksize); |
| if (len < 0) { |
| goto send_read_err_pkt; |
| } |
| if (len != blksize) { |
| finished = 1; |
| } |
| cp += len; |
| IF_FEATURE_TFTP_PROGRESS_BAR(G.pos += len;) |
| } |
| send_pkt: |
| /* Send packet */ |
| *((uint16_t*)xbuf) = htons(opcode); /* fill in opcode part */ |
| send_len = cp - xbuf; |
| /* NB: send_len value is preserved in code below |
| * for potential resend */ |
| |
| retries = TFTP_NUM_RETRIES; /* re-initialize */ |
| waittime_ms = TFTP_TIMEOUT_MS; |
| |
| send_again: |
| #if ENABLE_TFTP_DEBUG |
| fprintf(stderr, "sending %u bytes\n", send_len); |
| for (cp = xbuf; cp < &xbuf[send_len]; cp++) |
| fprintf(stderr, "%02x ", (unsigned char) *cp); |
| fprintf(stderr, "\n"); |
| #endif |
| xsendto(socket_fd, xbuf, send_len, &peer_lsa->u.sa, peer_lsa->len); |
| |
| #if ENABLE_FEATURE_TFTP_PROGRESS_BAR |
| if (is_bb_progress_inited(&G.pmt)) |
| tftp_progress_update(); |
| #endif |
| /* Was it final ACK? then exit */ |
| if (finished && (opcode == TFTP_ACK)) |
| goto ret; |
| |
| recv_again: |
| /* Receive packet */ |
| /*pfd[0].fd = socket_fd;*/ |
| pfd[0].events = POLLIN; |
| switch (safe_poll(pfd, 1, waittime_ms)) { |
| default: |
| /*bb_perror_msg("poll"); - done in safe_poll */ |
| goto ret; |
| case 0: |
| retries--; |
| if (retries == 0) { |
| tftp_progress_done(); |
| bb_error_msg("timeout"); |
| goto ret; /* no err packet sent */ |
| } |
| |
| /* exponential backoff with limit */ |
| waittime_ms += waittime_ms/2; |
| if (waittime_ms > TFTP_MAXTIMEOUT_MS) { |
| waittime_ms = TFTP_MAXTIMEOUT_MS; |
| } |
| |
| goto send_again; /* resend last sent pkt */ |
| case 1: |
| if (!our_lsa) { |
| /* tftp (not tftpd!) receiving 1st packet */ |
| our_lsa = ((void*)(ptrdiff_t)-1); /* not NULL */ |
| len = recvfrom(socket_fd, rbuf, io_bufsize, 0, |
| &peer_lsa->u.sa, &peer_lsa->len); |
| /* Our first dgram went to port 69 |
| * but reply may come from different one. |
| * Remember and use this new port (and IP) */ |
| if (len >= 0) |
| xconnect(socket_fd, &peer_lsa->u.sa, peer_lsa->len); |
| } else { |
| /* tftpd, or not the very first packet: |
| * socket is connect()ed, can just read from it. */ |
| /* Don't full_read()! |
| * This is not TCP, one read == one pkt! */ |
| len = safe_read(socket_fd, rbuf, io_bufsize); |
| } |
| if (len < 0) { |
| goto send_read_err_pkt; |
| } |
| if (len < 4) { /* too small? */ |
| goto recv_again; |
| } |
| } |
| |
| /* Process recv'ed packet */ |
| opcode = ntohs( ((uint16_t*)rbuf)[0] ); |
| recv_blk = ntohs( ((uint16_t*)rbuf)[1] ); |
| #if ENABLE_TFTP_DEBUG |
| fprintf(stderr, "received %d bytes: %04x %04x\n", len, opcode, recv_blk); |
| #endif |
| if (opcode == TFTP_ERROR) { |
| static const char errcode_str[] ALIGN1 = |
| "\0" |
| "file not found\0" |
| "access violation\0" |
| "disk full\0" |
| "bad operation\0" |
| "unknown transfer id\0" |
| "file already exists\0" |
| "no such user\0" |
| "bad option"; |
| |
| const char *msg = ""; |
| |
| if (len > 4 && rbuf[4] != '\0') { |
| msg = &rbuf[4]; |
| rbuf[io_bufsize - 1] = '\0'; /* paranoia */ |
| } else if (recv_blk <= 8) { |
| msg = nth_string(errcode_str, recv_blk); |
| } |
| bb_error_msg("server error: (%u) %s", recv_blk, msg); |
| goto ret; |
| } |
| |
| #if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| if (expect_OACK) { |
| expect_OACK = 0; |
| if (opcode == TFTP_OACK) { |
| /* server seems to support options */ |
| char *res; |
| |
| res = tftp_get_option("blksize", &rbuf[2], len - 2); |
| if (res) { |
| blksize = tftp_blksize_check(res, blksize); |
| if (blksize < 0) { |
| G_error_pkt_reason = ERR_BAD_OPT; |
| goto send_err_pkt; |
| } |
| io_bufsize = blksize + 4; |
| } |
| # if ENABLE_FEATURE_TFTP_PROGRESS_BAR |
| if (remote_file && G.size == 0) { /* if we don't know it yet */ |
| res = tftp_get_option("tsize", &rbuf[2], len - 2); |
| if (res) { |
| G.size = bb_strtoull(res, NULL, 10); |
| if (G.size) |
| tftp_progress_init(); |
| } |
| } |
| # endif |
| if (CMD_GET(option_mask32)) { |
| /* We'll send ACK for OACK, |
| * such ACK has "block no" of 0 */ |
| block_nr = 0; |
| } |
| continue; |
| } |
| /* rfc2347: |
| * "An option not acknowledged by the server |
| * must be ignored by the client and server |
| * as if it were never requested." */ |
| if (blksize != TFTP_BLKSIZE_DEFAULT) |
| bb_error_msg("falling back to blocksize "TFTP_BLKSIZE_DEFAULT_STR); |
| blksize = TFTP_BLKSIZE_DEFAULT; |
| io_bufsize = TFTP_BLKSIZE_DEFAULT + 4; |
| } |
| #endif |
| /* block_nr is already advanced to next block# we expect |
| * to get / block# we are about to send next time */ |
| |
| if (CMD_GET(option_mask32) && (opcode == TFTP_DATA)) { |
| if (recv_blk == block_nr) { |
| int sz = full_write(local_fd, &rbuf[4], len - 4); |
| if (sz != len - 4) { |
| strcpy(G_error_pkt_str, bb_msg_write_error); |
| G_error_pkt_reason = ERR_WRITE; |
| goto send_err_pkt; |
| } |
| if (sz != blksize) { |
| finished = 1; |
| } |
| IF_FEATURE_TFTP_PROGRESS_BAR(G.pos += sz;) |
| continue; /* send ACK */ |
| } |
| /* Disabled to cope with servers with Sorcerer's Apprentice Syndrome */ |
| #if 0 |
| if (recv_blk == (block_nr - 1)) { |
| /* Server lost our TFTP_ACK. Resend it */ |
| block_nr = recv_blk; |
| continue; |
| } |
| #endif |
| } |
| |
| if (CMD_PUT(option_mask32) && (opcode == TFTP_ACK)) { |
| /* did peer ACK our last DATA pkt? */ |
| if (recv_blk == (uint16_t) (block_nr - 1)) { |
| if (finished) |
| goto ret; |
| continue; /* send next block */ |
| } |
| } |
| /* Awww... recv'd packet is not recognized! */ |
| goto recv_again; |
| /* why recv_again? - rfc1123 says: |
| * "The sender (i.e., the side originating the DATA packets) |
| * must never resend the current DATA packet on receipt |
| * of a duplicate ACK". |
| * DATA pkts are resent ONLY on timeout. |
| * Thus "goto send_again" will ba a bad mistake above. |
| * See: |
| * http://en.wikipedia.org/wiki/Sorcerer's_Apprentice_Syndrome |
| */ |
| } /* end of "while (1)" */ |
| ret: |
| if (ENABLE_FEATURE_CLEAN_UP) { |
| close(local_fd); |
| close(socket_fd); |
| free(xbuf); |
| free(rbuf); |
| } |
| return finished == 0; /* returns 1 on failure */ |
| |
| send_read_err_pkt: |
| strcpy(G_error_pkt_str, bb_msg_read_error); |
| send_err_pkt: |
| if (G_error_pkt_str[0]) |
| bb_error_msg("%s", G_error_pkt_str); |
| G.error_pkt[1] = TFTP_ERROR; |
| xsendto(socket_fd, G.error_pkt, 4 + 1 + strlen(G_error_pkt_str), |
| &peer_lsa->u.sa, peer_lsa->len); |
| return EXIT_FAILURE; |
| #undef remote_file |
| } |
| |
| #if ENABLE_TFTP |
| |
| int tftp_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int tftp_main(int argc UNUSED_PARAM, char **argv) |
| { |
| len_and_sockaddr *peer_lsa; |
| const char *local_file = NULL; |
| const char *remote_file = NULL; |
| # if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| const char *blksize_str = TFTP_BLKSIZE_DEFAULT_STR; |
| int blksize; |
| # endif |
| int result; |
| int port; |
| IF_GETPUT(int opt;) |
| |
| INIT_G(); |
| |
| /* -p or -g is mandatory, and they are mutually exclusive */ |
| opt_complementary = "" IF_FEATURE_TFTP_GET("g:") IF_FEATURE_TFTP_PUT("p:") |
| IF_GETPUT("g--p:p--g:"); |
| |
| IF_GETPUT(opt =) getopt32(argv, |
| IF_FEATURE_TFTP_GET("g") IF_FEATURE_TFTP_PUT("p") |
| "l:r:" IF_FEATURE_TFTP_BLOCKSIZE("b:"), |
| &local_file, &remote_file |
| IF_FEATURE_TFTP_BLOCKSIZE(, &blksize_str)); |
| argv += optind; |
| |
| # if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| /* Check if the blksize is valid: |
| * RFC2348 says between 8 and 65464 */ |
| blksize = tftp_blksize_check(blksize_str, 65564); |
| if (blksize < 0) { |
| //bb_error_msg("bad block size"); |
| return EXIT_FAILURE; |
| } |
| # endif |
| |
| if (remote_file) { |
| if (!local_file) { |
| const char *slash = strrchr(remote_file, '/'); |
| local_file = slash ? slash + 1 : remote_file; |
| } |
| } else { |
| remote_file = local_file; |
| } |
| |
| /* Error if filename or host is not known */ |
| if (!remote_file || !argv[0]) |
| bb_show_usage(); |
| |
| port = bb_lookup_port(argv[1], "udp", 69); |
| peer_lsa = xhost2sockaddr(argv[0], port); |
| |
| # if ENABLE_TFTP_DEBUG |
| fprintf(stderr, "using server '%s', remote_file '%s', local_file '%s'\n", |
| xmalloc_sockaddr2dotted(&peer_lsa->u.sa), |
| remote_file, local_file); |
| # endif |
| |
| # if ENABLE_FEATURE_TFTP_PROGRESS_BAR |
| G.file = remote_file; |
| # endif |
| result = tftp_protocol( |
| NULL /*our_lsa*/, peer_lsa, |
| local_file, remote_file |
| IF_FEATURE_TFTP_BLOCKSIZE(, 1 /* want_transfer_size */) |
| IF_FEATURE_TFTP_BLOCKSIZE(, blksize) |
| ); |
| tftp_progress_done(); |
| |
| if (result != EXIT_SUCCESS && NOT_LONE_DASH(local_file) && CMD_GET(opt)) { |
| unlink(local_file); |
| } |
| return result; |
| } |
| |
| #endif /* ENABLE_TFTP */ |
| |
| #if ENABLE_TFTPD |
| int tftpd_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int tftpd_main(int argc UNUSED_PARAM, char **argv) |
| { |
| len_and_sockaddr *our_lsa; |
| len_and_sockaddr *peer_lsa; |
| char *local_file, *mode, *user_opt; |
| const char *error_msg; |
| int opt, result, opcode; |
| IF_FEATURE_TFTP_BLOCKSIZE(int blksize = TFTP_BLKSIZE_DEFAULT;) |
| IF_FEATURE_TFTP_BLOCKSIZE(int want_transfer_size = 0;) |
| |
| INIT_G(); |
| |
| our_lsa = get_sock_lsa(STDIN_FILENO); |
| if (!our_lsa) { |
| /* This is confusing: |
| *bb_error_msg_and_die("stdin is not a socket"); |
| * Better: */ |
| bb_show_usage(); |
| /* Help text says that tftpd must be used as inetd service, |
| * which is by far the most usual cause of get_sock_lsa |
| * failure */ |
| } |
| peer_lsa = xzalloc(LSA_LEN_SIZE + our_lsa->len); |
| peer_lsa->len = our_lsa->len; |
| |
| /* Shifting to not collide with TFTP_OPTs */ |
| opt = option_mask32 = TFTPD_OPT | (getopt32(argv, "rcu:l", &user_opt) << 8); |
| argv += optind; |
| if (opt & TFTPD_OPT_l) { |
| openlog(applet_name, LOG_PID, LOG_DAEMON); |
| logmode = LOGMODE_SYSLOG; |
| } |
| if (opt & TFTPD_OPT_u) { |
| /* Must be before xchroot */ |
| G.pw = xgetpwnam(user_opt); |
| } |
| if (argv[0]) { |
| xchroot(argv[0]); |
| } |
| |
| result = recv_from_to(STDIN_FILENO, |
| G.block_buf, sizeof(G.block_buf) + 1, |
| /* ^^^ sizeof+1 to reliably detect oversized input */ |
| 0 /* flags */, |
| &peer_lsa->u.sa, &our_lsa->u.sa, our_lsa->len); |
| |
| error_msg = "malformed packet"; |
| opcode = ntohs(*(uint16_t*)G.block_buf); |
| if (result < 4 || result > sizeof(G.block_buf) |
| /*|| G.block_buf[result-1] != '\0' - bug compatibility, see below */ |
| || (IF_FEATURE_TFTP_PUT(opcode != TFTP_RRQ) /* not download */ |
| IF_GETPUT(&&) |
| IF_FEATURE_TFTP_GET(opcode != TFTP_WRQ) /* not upload */ |
| ) |
| ) { |
| goto err; |
| } |
| /* Some HP PA-RISC firmware always sends fixed 516-byte requests, |
| * with trailing garbage. |
| * Support that by not requiring NUL to be the last byte (see above). |
| * To make strXYZ() ops safe, force NUL termination: |
| */ |
| G.block_buf_tail[0] = '\0'; |
| |
| local_file = G.block_buf + 2; |
| if (local_file[0] == '.' || strstr(local_file, "/.")) { |
| error_msg = "dot in file name"; |
| goto err; |
| } |
| mode = local_file + strlen(local_file) + 1; |
| /* RFC 1350 says mode string is case independent */ |
| if (mode >= G.block_buf + result || strcasecmp(mode, "octet") != 0) { |
| goto err; |
| } |
| # if ENABLE_FEATURE_TFTP_BLOCKSIZE |
| { |
| char *res; |
| char *opt_str = mode + sizeof("octet"); |
| int opt_len = G.block_buf + result - opt_str; |
| if (opt_len > 0) { |
| res = tftp_get_option("blksize", opt_str, opt_len); |
| if (res) { |
| blksize = tftp_blksize_check(res, 65564); |
| if (blksize < 0) { |
| G_error_pkt_reason = ERR_BAD_OPT; |
| /* will just send error pkt */ |
| goto do_proto; |
| } |
| } |
| if (opcode != TFTP_WRQ /* download? */ |
| /* did client ask us about file size? */ |
| && tftp_get_option("tsize", opt_str, opt_len) |
| ) { |
| want_transfer_size = 1; |
| } |
| } |
| } |
| # endif |
| |
| if (!ENABLE_FEATURE_TFTP_PUT || opcode == TFTP_WRQ) { |
| if (opt & TFTPD_OPT_r) { |
| /* This would mean "disk full" - not true */ |
| /*G_error_pkt_reason = ERR_WRITE;*/ |
| error_msg = bb_msg_write_error; |
| goto err; |
| } |
| IF_GETPUT(option_mask32 |= TFTP_OPT_GET;) /* will receive file's data */ |
| } else { |
| IF_GETPUT(option_mask32 |= TFTP_OPT_PUT;) /* will send file's data */ |
| } |
| |
| /* NB: if G_error_pkt_str or G_error_pkt_reason is set up, |
| * tftp_protocol() just sends one error pkt and returns */ |
| |
| do_proto: |
| close(STDIN_FILENO); /* close old, possibly wildcard socket */ |
| /* tftp_protocol() will create new one, bound to particular local IP */ |
| result = tftp_protocol( |
| our_lsa, peer_lsa, |
| local_file IF_TFTP(, NULL /*remote_file*/) |
| IF_FEATURE_TFTP_BLOCKSIZE(, want_transfer_size) |
| IF_FEATURE_TFTP_BLOCKSIZE(, blksize) |
| ); |
| |
| return result; |
| err: |
| strcpy(G_error_pkt_str, error_msg); |
| goto do_proto; |
| } |
| |
| #endif /* ENABLE_TFTPD */ |
| |
| #endif /* ENABLE_FEATURE_TFTP_GET || ENABLE_FEATURE_TFTP_PUT */ |