| # Sample udhcpd configuration file (/etc/udhcpd.conf) |
| # Values shown are defaults |
| |
| # The start and end of the IP lease block |
| start 192.168.0.20 |
| end 192.168.0.254 |
| |
| # The interface that udhcpd will use |
| interface eth0 |
| |
| # The maximum number of leases (includes addresses reserved |
| # by OFFER's, DECLINE's, and ARP conflicts). Will be corrected |
| # if it's bigger than IP lease block, but it ok to make it |
| # smaller than lease block. |
| #max_leases 254 |
| |
| # The amount of time that an IP will be reserved (leased to nobody) |
| # if a DHCP decline message is received (seconds) |
| #decline_time 3600 |
| |
| # The amount of time that an IP will be reserved |
| # if an ARP conflict occurs (seconds) |
| #conflict_time 3600 |
| |
| # How long an offered address is reserved (seconds) |
| #offer_time 60 |
| |
| # If client asks for lease below this value, it will be rounded up |
| # to this value (seconds) |
| #min_lease 60 |
| |
| # The location of the pid file |
| #pidfile /var/run/udhcpd.pid |
| |
| # The location of the leases file |
| #lease_file /var/lib/misc/udhcpd.leases |
| |
| # The time period at which udhcpd will write out leases file. |
| # If this is 0, udhcpd will never automatically write leases file. |
| # Specified in seconds. |
| #auto_time 7200 |
| |
| # Every time udhcpd writes a leases file, the below script will be called |
| #notify_file # default: no script |
| #notify_file dumpleases # useful for debugging |
| |
| # The following are BOOTP specific options |
| # next server to use in bootstrap |
| #siaddr 192.168.0.22 # default: 0.0.0.0 (none) |
| # tftp server name |
| #sname zorak # default: none |
| # tftp file to download (e.g. kernel image) |
| #boot_file /var/nfs_root # default: none |
| |
| # NOTE: "boot_file FILE" and "opt bootfile FILE" are conceptually the same, |
| # but "boot_file" goes into BOOTP-defined fixed-size field in the packet, |
| # whereas "opt bootfile" goes into DHCP option 0x43. |
| # Same for "sname HOST" and "opt tftp HOST". |
| |
| # Static leases map |
| #static_lease 00:60:08:11:CE:4E 192.168.0.54 |
| #static_lease 00:60:08:11:CE:3E 192.168.0.44 optional_hostname |
| |
| # The remainder of options are DHCP options and can be specified with the |
| # keyword 'opt' or 'option'. If an option can take multiple items, such |
| # as the dns option, they can be listed on the same line, or multiple |
| # lines. |
| # Examples: |
| opt dns 192.168.10.2 192.168.10.10 |
| option subnet 255.255.255.0 |
| opt router 192.168.10.2 |
| opt wins 192.168.10.10 |
| option dns 129.219.13.81 # appended to above DNS servers for a total of 3 |
| option domain local |
| option lease 864000 # default: 10 days |
| option msstaticroutes 10.0.0.0/8 10.127.0.1 # single static route |
| option staticroutes 10.0.0.0/8 10.127.0.1, 10.11.12.0/24 10.11.12.1 |
| # Arbitrary option in hex or string form: |
| option 0x08 01020304 # option 8: "cookie server IP addr: 1.2.3.4" |
| option 14 "dumpfile" |
| |
| # Currently supported options [hex option value] (for more info, see common.c): |
| #opt lease NUM # [0x33] |
| #opt subnet IP # [0x01] |
| #opt broadcast IP # [0x1c] |
| #opt router IP_LIST # [0x03] |
| #opt ipttl NUM # [0x17] |
| #opt mtu NUM # [0x1a] |
| #opt hostname STRING # [0x0c] client's hostname |
| #opt domain STRING # [0x0f] client's domain suffix |
| #opt search STRING_LIST # [0x77] search domains |
| #opt nisdomain STRING # [0x28] |
| #opt timezone NUM # [0x02] (localtime - UTC_time) in seconds. signed |
| #opt tzstr STRING # [0x64] RFC 4833. IEEE 1003.1 TZ string |
| #opt tzdbstr STRING # [0x65] RFC 4833. Reference to the TZ database string |
| #opt tftp STRING # [0x42] tftp server name |
| #opt bootfile STRING # [0x43] tftp file to download (e.g. kernel image) |
| #opt bootsize NUM # [0x0d] size of that file |
| #opt rootpath STRING # [0x11] (NFS) path to mount as root fs |
| #opt wpad STRING # [0xfc] Web Proxy Auto Discovery Protocol |
| #opt serverid IP # [0x36] default: server's IP |
| #opt message STRING # [0x38] error message (if set, udhcpd would send it on success too) |
| #opt vlanid NUM # [0x84] 802.1P VLAN ID |
| #opt vlanpriority NUM # [0x85] 802.1Q VLAN priority |
| #opt vendor STRING # [0x3c] client's vendor string, not intended to be sent by DHCP servers |
| # RFC 5071: PXELINUX Options |
| #opt 0xd0 F100747E # [0xd0] magic needed for other options to be recognized by clients |
| #opt pxeconffile STRING # [0xd1] |
| #opt pxepathprefix STRING # [0xd2] |
| #opt reboottime NUM # [0xd3] bootstrap timeout |
| # Options specifying server(s) |
| #opt dns IP_LIST # [0x06] |
| #opt wins IP_LIST # [0x2c] |
| #opt nissrv IP_LIST # [0x29] |
| #opt ntpsrv IP_LIST # [0x2a] |
| #opt lprsrv IP_LIST # [0x09] |
| #opt swapsrv IP # [0x10] |
| # Options specifying routes |
| #opt routes IP_PAIR_LIST # [0x21] |
| #opt staticroutes STATIC_ROUTES # [0x79] RFC 3442 classless static route option |
| #opt msstaticroutes STATIC_ROUTES # [0xf9] same, using MS option number |
| # Obsolete options, no longer supported |
| #opt logsrv IP_LIST # [0x07] 704/UDP log server (not syslog!) |
| #opt namesrv IP_LIST # [0x05] IEN 116 name server, obsolete (August 1979!!!) |
| #opt cookiesrv IP_LIST # [0x08] RFC 865 "quote of the day" server, rarely (never?) used |
| #opt timesrv IP_LIST # [0x04] RFC 868 time server, rarely (never?) used |
| # TODO: in development |
| #opt userclass STRING # [0x4d] RFC 3004. set of LASCII strings. "I am a printer" etc |
| #opt sipsrv STRING LIST # [0x78] RFC 3361. flag byte, then: 0: domain names, 1: IP addrs |
| #opt ip6rd .... # [0xd4] IPv6 rapid deployment |