Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame] | 1 | /* |
| 2 | * gpio-regulator.c |
| 3 | * |
| 4 | * Copyright 2011 Heiko Stuebner <heiko@sntech.de> |
| 5 | * |
| 6 | * based on fixed.c |
| 7 | * |
| 8 | * Copyright 2008 Wolfson Microelectronics PLC. |
| 9 | * |
| 10 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| 11 | * |
| 12 | * Copyright (c) 2009 Nokia Corporation |
| 13 | * Roger Quadros <ext-roger.quadros@nokia.com> |
| 14 | * |
| 15 | * This program is free software; you can redistribute it and/or |
| 16 | * modify it under the terms of the GNU General Public License as |
| 17 | * published by the Free Software Foundation; either version 2 of the |
| 18 | * License, or (at your option) any later version. |
| 19 | * |
| 20 | * This is useful for systems with mixed controllable and |
| 21 | * non-controllable regulators, as well as for allowing testing on |
| 22 | * systems with no controllable regulators. |
| 23 | */ |
| 24 | |
| 25 | #include <linux/err.h> |
| 26 | #include <linux/mutex.h> |
| 27 | #include <linux/module.h> |
| 28 | #include <linux/platform_device.h> |
| 29 | #include <linux/regulator/driver.h> |
| 30 | #include <linux/regulator/machine.h> |
| 31 | #include <linux/regulator/of_regulator.h> |
| 32 | #include <linux/regulator/gpio-regulator.h> |
| 33 | #include <linux/gpio.h> |
| 34 | #include <linux/slab.h> |
| 35 | #include <linux/of.h> |
| 36 | #include <linux/of_gpio.h> |
| 37 | |
| 38 | struct gpio_regulator_data { |
| 39 | struct regulator_desc desc; |
| 40 | struct regulator_dev *dev; |
| 41 | |
| 42 | struct gpio *gpios; |
| 43 | int nr_gpios; |
| 44 | |
| 45 | struct gpio_regulator_state *states; |
| 46 | int nr_states; |
| 47 | |
| 48 | int state; |
| 49 | }; |
| 50 | |
| 51 | static int gpio_regulator_get_value(struct regulator_dev *dev) |
| 52 | { |
| 53 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 54 | int ptr; |
| 55 | |
| 56 | for (ptr = 0; ptr < data->nr_states; ptr++) |
| 57 | if (data->states[ptr].gpios == data->state) |
| 58 | return data->states[ptr].value; |
| 59 | |
| 60 | return -EINVAL; |
| 61 | } |
| 62 | |
| 63 | static int gpio_regulator_set_voltage(struct regulator_dev *dev, |
| 64 | int min_uV, int max_uV, |
| 65 | unsigned *selector) |
| 66 | { |
| 67 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 68 | int ptr, target = 0, state, best_val = INT_MAX; |
| 69 | |
| 70 | for (ptr = 0; ptr < data->nr_states; ptr++) |
| 71 | if (data->states[ptr].value < best_val && |
| 72 | data->states[ptr].value >= min_uV && |
| 73 | data->states[ptr].value <= max_uV) { |
| 74 | target = data->states[ptr].gpios; |
| 75 | best_val = data->states[ptr].value; |
| 76 | if (selector) |
| 77 | *selector = ptr; |
| 78 | } |
| 79 | |
| 80 | if (best_val == INT_MAX) |
| 81 | return -EINVAL; |
| 82 | |
| 83 | for (ptr = 0; ptr < data->nr_gpios; ptr++) { |
| 84 | state = (target & (1 << ptr)) >> ptr; |
| 85 | gpio_set_value_cansleep(data->gpios[ptr].gpio, state); |
| 86 | } |
| 87 | data->state = target; |
| 88 | |
| 89 | return 0; |
| 90 | } |
| 91 | |
| 92 | static int gpio_regulator_list_voltage(struct regulator_dev *dev, |
| 93 | unsigned selector) |
| 94 | { |
| 95 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 96 | |
| 97 | if (selector >= data->nr_states) |
| 98 | return -EINVAL; |
| 99 | |
| 100 | return data->states[selector].value; |
| 101 | } |
| 102 | |
| 103 | static int gpio_regulator_set_current_limit(struct regulator_dev *dev, |
| 104 | int min_uA, int max_uA) |
| 105 | { |
| 106 | struct gpio_regulator_data *data = rdev_get_drvdata(dev); |
| 107 | int ptr, target = 0, state, best_val = 0; |
| 108 | |
| 109 | for (ptr = 0; ptr < data->nr_states; ptr++) |
| 110 | if (data->states[ptr].value > best_val && |
| 111 | data->states[ptr].value >= min_uA && |
| 112 | data->states[ptr].value <= max_uA) { |
| 113 | target = data->states[ptr].gpios; |
| 114 | best_val = data->states[ptr].value; |
| 115 | } |
| 116 | |
| 117 | if (best_val == 0) |
| 118 | return -EINVAL; |
| 119 | |
| 120 | for (ptr = 0; ptr < data->nr_gpios; ptr++) { |
| 121 | state = (target & (1 << ptr)) >> ptr; |
| 122 | gpio_set_value_cansleep(data->gpios[ptr].gpio, state); |
| 123 | } |
| 124 | data->state = target; |
| 125 | |
| 126 | return 0; |
| 127 | } |
| 128 | |
| 129 | static struct regulator_ops gpio_regulator_voltage_ops = { |
| 130 | .get_voltage = gpio_regulator_get_value, |
| 131 | .set_voltage = gpio_regulator_set_voltage, |
| 132 | .list_voltage = gpio_regulator_list_voltage, |
| 133 | }; |
| 134 | |
| 135 | static struct gpio_regulator_config * |
| 136 | of_get_gpio_regulator_config(struct device *dev, struct device_node *np, |
| 137 | const struct regulator_desc *desc) |
| 138 | { |
| 139 | struct gpio_regulator_config *config; |
| 140 | const char *regtype; |
| 141 | int proplen, gpio, i; |
| 142 | int ret; |
| 143 | |
| 144 | config = devm_kzalloc(dev, |
| 145 | sizeof(struct gpio_regulator_config), |
| 146 | GFP_KERNEL); |
| 147 | if (!config) |
| 148 | return ERR_PTR(-ENOMEM); |
| 149 | |
| 150 | config->init_data = of_get_regulator_init_data(dev, np, desc); |
| 151 | if (!config->init_data) |
| 152 | return ERR_PTR(-EINVAL); |
| 153 | |
| 154 | config->supply_name = config->init_data->constraints.name; |
| 155 | |
| 156 | if (of_property_read_bool(np, "enable-active-high")) |
| 157 | config->enable_high = true; |
| 158 | |
| 159 | if (of_property_read_bool(np, "enable-at-boot")) |
| 160 | config->enabled_at_boot = true; |
| 161 | |
| 162 | of_property_read_u32(np, "startup-delay-us", &config->startup_delay); |
| 163 | |
| 164 | config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); |
| 165 | |
| 166 | /* Fetch GPIOs. - optional property*/ |
| 167 | ret = of_gpio_count(np); |
| 168 | if ((ret < 0) && (ret != -ENOENT)) |
| 169 | return ERR_PTR(ret); |
| 170 | |
| 171 | if (ret > 0) { |
| 172 | config->nr_gpios = ret; |
| 173 | config->gpios = devm_kzalloc(dev, |
| 174 | sizeof(struct gpio) * config->nr_gpios, |
| 175 | GFP_KERNEL); |
| 176 | if (!config->gpios) |
| 177 | return ERR_PTR(-ENOMEM); |
| 178 | |
| 179 | proplen = of_property_count_u32_elems(np, "gpios-states"); |
| 180 | /* optional property */ |
| 181 | if (proplen < 0) |
| 182 | proplen = 0; |
| 183 | |
| 184 | if (proplen > 0 && proplen != config->nr_gpios) { |
| 185 | dev_warn(dev, "gpios <-> gpios-states mismatch\n"); |
| 186 | proplen = 0; |
| 187 | } |
| 188 | |
| 189 | for (i = 0; i < config->nr_gpios; i++) { |
| 190 | gpio = of_get_named_gpio(np, "gpios", i); |
| 191 | if (gpio < 0) |
| 192 | break; |
| 193 | config->gpios[i].gpio = gpio; |
| 194 | if (proplen > 0) { |
| 195 | of_property_read_u32_index(np, "gpios-states", |
| 196 | i, &ret); |
| 197 | if (ret) |
| 198 | config->gpios[i].flags = |
| 199 | GPIOF_OUT_INIT_HIGH; |
| 200 | } |
| 201 | } |
| 202 | } |
| 203 | |
| 204 | /* Fetch states. */ |
| 205 | proplen = of_property_count_u32_elems(np, "states"); |
| 206 | if (proplen < 0) { |
| 207 | dev_err(dev, "No 'states' property found\n"); |
| 208 | return ERR_PTR(-EINVAL); |
| 209 | } |
| 210 | |
| 211 | config->states = devm_kzalloc(dev, |
| 212 | sizeof(struct gpio_regulator_state) |
| 213 | * (proplen / 2), |
| 214 | GFP_KERNEL); |
| 215 | if (!config->states) |
| 216 | return ERR_PTR(-ENOMEM); |
| 217 | |
| 218 | for (i = 0; i < proplen / 2; i++) { |
| 219 | of_property_read_u32_index(np, "states", i * 2, |
| 220 | &config->states[i].value); |
| 221 | of_property_read_u32_index(np, "states", i * 2 + 1, |
| 222 | &config->states[i].gpios); |
| 223 | } |
| 224 | config->nr_states = i; |
| 225 | |
| 226 | config->type = REGULATOR_VOLTAGE; |
| 227 | ret = of_property_read_string(np, "regulator-type", ®type); |
| 228 | if (ret >= 0) { |
| 229 | if (!strncmp("voltage", regtype, 7)) |
| 230 | config->type = REGULATOR_VOLTAGE; |
| 231 | else if (!strncmp("current", regtype, 7)) |
| 232 | config->type = REGULATOR_CURRENT; |
| 233 | else |
| 234 | dev_warn(dev, "Unknown regulator-type '%s'\n", |
| 235 | regtype); |
| 236 | } |
| 237 | |
| 238 | return config; |
| 239 | } |
| 240 | |
| 241 | static struct regulator_ops gpio_regulator_current_ops = { |
| 242 | .get_current_limit = gpio_regulator_get_value, |
| 243 | .set_current_limit = gpio_regulator_set_current_limit, |
| 244 | }; |
| 245 | |
| 246 | static int gpio_regulator_probe(struct platform_device *pdev) |
| 247 | { |
| 248 | struct gpio_regulator_config *config = dev_get_platdata(&pdev->dev); |
| 249 | struct device_node *np = pdev->dev.of_node; |
| 250 | struct gpio_regulator_data *drvdata; |
| 251 | struct regulator_config cfg = { }; |
| 252 | int ptr, ret, state; |
| 253 | |
| 254 | drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data), |
| 255 | GFP_KERNEL); |
| 256 | if (drvdata == NULL) |
| 257 | return -ENOMEM; |
| 258 | |
| 259 | if (np) { |
| 260 | config = of_get_gpio_regulator_config(&pdev->dev, np, |
| 261 | &drvdata->desc); |
| 262 | if (IS_ERR(config)) |
| 263 | return PTR_ERR(config); |
| 264 | } |
| 265 | |
| 266 | drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); |
| 267 | if (drvdata->desc.name == NULL) { |
| 268 | dev_err(&pdev->dev, "Failed to allocate supply name\n"); |
| 269 | ret = -ENOMEM; |
| 270 | goto err; |
| 271 | } |
| 272 | |
| 273 | if (config->nr_gpios != 0) { |
| 274 | drvdata->gpios = kmemdup(config->gpios, |
| 275 | config->nr_gpios * sizeof(struct gpio), |
| 276 | GFP_KERNEL); |
| 277 | if (drvdata->gpios == NULL) { |
| 278 | dev_err(&pdev->dev, "Failed to allocate gpio data\n"); |
| 279 | ret = -ENOMEM; |
| 280 | goto err_name; |
| 281 | } |
| 282 | |
| 283 | drvdata->nr_gpios = config->nr_gpios; |
| 284 | ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); |
| 285 | if (ret) { |
| 286 | dev_err(&pdev->dev, |
| 287 | "Could not obtain regulator setting GPIOs: %d\n", ret); |
| 288 | goto err_memstate; |
| 289 | } |
| 290 | } |
| 291 | |
| 292 | drvdata->states = kmemdup(config->states, |
| 293 | config->nr_states * |
| 294 | sizeof(struct gpio_regulator_state), |
| 295 | GFP_KERNEL); |
| 296 | if (drvdata->states == NULL) { |
| 297 | dev_err(&pdev->dev, "Failed to allocate state data\n"); |
| 298 | ret = -ENOMEM; |
| 299 | goto err_memgpio; |
| 300 | } |
| 301 | drvdata->nr_states = config->nr_states; |
| 302 | |
| 303 | drvdata->desc.owner = THIS_MODULE; |
| 304 | drvdata->desc.enable_time = config->startup_delay; |
| 305 | |
| 306 | /* handle regulator type*/ |
| 307 | switch (config->type) { |
| 308 | case REGULATOR_VOLTAGE: |
| 309 | drvdata->desc.type = REGULATOR_VOLTAGE; |
| 310 | drvdata->desc.ops = &gpio_regulator_voltage_ops; |
| 311 | drvdata->desc.n_voltages = config->nr_states; |
| 312 | break; |
| 313 | case REGULATOR_CURRENT: |
| 314 | drvdata->desc.type = REGULATOR_CURRENT; |
| 315 | drvdata->desc.ops = &gpio_regulator_current_ops; |
| 316 | break; |
| 317 | default: |
| 318 | dev_err(&pdev->dev, "No regulator type set\n"); |
| 319 | ret = -EINVAL; |
| 320 | goto err_memgpio; |
| 321 | } |
| 322 | |
| 323 | /* build initial state from gpio init data. */ |
| 324 | state = 0; |
| 325 | for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) { |
| 326 | if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH) |
| 327 | state |= (1 << ptr); |
| 328 | } |
| 329 | drvdata->state = state; |
| 330 | |
| 331 | cfg.dev = &pdev->dev; |
| 332 | cfg.init_data = config->init_data; |
| 333 | cfg.driver_data = drvdata; |
| 334 | cfg.of_node = np; |
| 335 | |
| 336 | if (gpio_is_valid(config->enable_gpio)) { |
| 337 | cfg.ena_gpio = config->enable_gpio; |
| 338 | cfg.ena_gpio_initialized = true; |
| 339 | } |
| 340 | cfg.ena_gpio_invert = !config->enable_high; |
| 341 | if (config->enabled_at_boot) { |
| 342 | if (config->enable_high) |
| 343 | cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; |
| 344 | else |
| 345 | cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; |
| 346 | } else { |
| 347 | if (config->enable_high) |
| 348 | cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; |
| 349 | else |
| 350 | cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; |
| 351 | } |
| 352 | |
| 353 | drvdata->dev = regulator_register(&drvdata->desc, &cfg); |
| 354 | if (IS_ERR(drvdata->dev)) { |
| 355 | ret = PTR_ERR(drvdata->dev); |
| 356 | dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); |
| 357 | goto err_stategpio; |
| 358 | } |
| 359 | |
| 360 | platform_set_drvdata(pdev, drvdata); |
| 361 | |
| 362 | return 0; |
| 363 | |
| 364 | err_stategpio: |
| 365 | gpio_free_array(drvdata->gpios, drvdata->nr_gpios); |
| 366 | err_memstate: |
| 367 | kfree(drvdata->states); |
| 368 | err_memgpio: |
| 369 | kfree(drvdata->gpios); |
| 370 | err_name: |
| 371 | kfree(drvdata->desc.name); |
| 372 | err: |
| 373 | return ret; |
| 374 | } |
| 375 | |
| 376 | static int gpio_regulator_remove(struct platform_device *pdev) |
| 377 | { |
| 378 | struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev); |
| 379 | |
| 380 | regulator_unregister(drvdata->dev); |
| 381 | |
| 382 | gpio_free_array(drvdata->gpios, drvdata->nr_gpios); |
| 383 | |
| 384 | kfree(drvdata->states); |
| 385 | kfree(drvdata->gpios); |
| 386 | |
| 387 | kfree(drvdata->desc.name); |
| 388 | |
| 389 | return 0; |
| 390 | } |
| 391 | |
| 392 | #if defined(CONFIG_OF) |
| 393 | static const struct of_device_id regulator_gpio_of_match[] = { |
| 394 | { .compatible = "regulator-gpio", }, |
| 395 | {}, |
| 396 | }; |
| 397 | MODULE_DEVICE_TABLE(of, regulator_gpio_of_match); |
| 398 | #endif |
| 399 | |
| 400 | static struct platform_driver gpio_regulator_driver = { |
| 401 | .probe = gpio_regulator_probe, |
| 402 | .remove = gpio_regulator_remove, |
| 403 | .driver = { |
| 404 | .name = "gpio-regulator", |
| 405 | .of_match_table = of_match_ptr(regulator_gpio_of_match), |
| 406 | }, |
| 407 | }; |
| 408 | |
| 409 | static int __init gpio_regulator_init(void) |
| 410 | { |
| 411 | return platform_driver_register(&gpio_regulator_driver); |
| 412 | } |
| 413 | subsys_initcall(gpio_regulator_init); |
| 414 | |
| 415 | static void __exit gpio_regulator_exit(void) |
| 416 | { |
| 417 | platform_driver_unregister(&gpio_regulator_driver); |
| 418 | } |
| 419 | module_exit(gpio_regulator_exit); |
| 420 | |
| 421 | MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); |
| 422 | MODULE_DESCRIPTION("gpio voltage regulator"); |
| 423 | MODULE_LICENSE("GPL"); |
| 424 | MODULE_ALIAS("platform:gpio-regulator"); |