| Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> |
| 3 | * |
| 4 | * The code contained herein is licensed under the GNU General Public |
| 5 | * License. You may obtain a copy of the GNU General Public License |
| 6 | * Version 2 or later at the following locations: |
| 7 | * |
| 8 | * http://www.opensource.org/licenses/gpl-license.html |
| 9 | * http://www.gnu.org/copyleft/gpl.html |
| 10 | */ |
| 11 | |
| 12 | #include "skeleton.dtsi" |
| 13 | #include "imx25-pinfunc.h" |
| 14 | |
| 15 | / { |
| 16 | aliases { |
| 17 | ethernet0 = &fec; |
| 18 | gpio0 = &gpio1; |
| 19 | gpio1 = &gpio2; |
| 20 | gpio2 = &gpio3; |
| 21 | gpio3 = &gpio4; |
| 22 | i2c0 = &i2c1; |
| 23 | i2c1 = &i2c2; |
| 24 | i2c2 = &i2c3; |
| 25 | mmc0 = &esdhc1; |
| 26 | mmc1 = &esdhc2; |
| 27 | serial0 = &uart1; |
| 28 | serial1 = &uart2; |
| 29 | serial2 = &uart3; |
| 30 | serial3 = &uart4; |
| 31 | serial4 = &uart5; |
| 32 | spi0 = &spi1; |
| 33 | spi1 = &spi2; |
| 34 | spi2 = &spi3; |
| 35 | usb0 = &usbotg; |
| 36 | usb1 = &usbhost1; |
| 37 | }; |
| 38 | |
| 39 | cpus { |
| 40 | #address-cells = <0>; |
| 41 | #size-cells = <0>; |
| 42 | |
| 43 | cpu { |
| 44 | compatible = "arm,arm926ej-s"; |
| 45 | device_type = "cpu"; |
| 46 | }; |
| 47 | }; |
| 48 | |
| 49 | asic: asic-interrupt-controller@68000000 { |
| 50 | compatible = "fsl,imx25-asic", "fsl,avic"; |
| 51 | interrupt-controller; |
| 52 | #interrupt-cells = <1>; |
| 53 | reg = <0x68000000 0x8000000>; |
| 54 | }; |
| 55 | |
| 56 | clocks { |
| 57 | #address-cells = <1>; |
| 58 | #size-cells = <0>; |
| 59 | |
| 60 | osc { |
| 61 | compatible = "fsl,imx-osc", "fixed-clock"; |
| 62 | #clock-cells = <0>; |
| 63 | clock-frequency = <24000000>; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | soc { |
| 68 | #address-cells = <1>; |
| 69 | #size-cells = <1>; |
| 70 | compatible = "simple-bus"; |
| 71 | interrupt-parent = <&asic>; |
| 72 | ranges; |
| 73 | |
| 74 | aips@43f00000 { /* AIPS1 */ |
| 75 | compatible = "fsl,aips-bus", "simple-bus"; |
| 76 | #address-cells = <1>; |
| 77 | #size-cells = <1>; |
| 78 | reg = <0x43f00000 0x100000>; |
| 79 | ranges; |
| 80 | |
| 81 | i2c1: i2c@43f80000 { |
| 82 | #address-cells = <1>; |
| 83 | #size-cells = <0>; |
| 84 | compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; |
| 85 | reg = <0x43f80000 0x4000>; |
| 86 | clocks = <&clks 48>; |
| 87 | clock-names = ""; |
| 88 | interrupts = <3>; |
| 89 | status = "disabled"; |
| 90 | }; |
| 91 | |
| 92 | i2c3: i2c@43f84000 { |
| 93 | #address-cells = <1>; |
| 94 | #size-cells = <0>; |
| 95 | compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; |
| 96 | reg = <0x43f84000 0x4000>; |
| 97 | clocks = <&clks 48>; |
| 98 | clock-names = ""; |
| 99 | interrupts = <10>; |
| 100 | status = "disabled"; |
| 101 | }; |
| 102 | |
| 103 | can1: can@43f88000 { |
| 104 | compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; |
| 105 | reg = <0x43f88000 0x4000>; |
| 106 | interrupts = <43>; |
| 107 | clocks = <&clks 75>, <&clks 75>; |
| 108 | clock-names = "ipg", "per"; |
| 109 | status = "disabled"; |
| 110 | }; |
| 111 | |
| 112 | can2: can@43f8c000 { |
| 113 | compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; |
| 114 | reg = <0x43f8c000 0x4000>; |
| 115 | interrupts = <44>; |
| 116 | clocks = <&clks 76>, <&clks 76>; |
| 117 | clock-names = "ipg", "per"; |
| 118 | status = "disabled"; |
| 119 | }; |
| 120 | |
| 121 | uart1: serial@43f90000 { |
| 122 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| 123 | reg = <0x43f90000 0x4000>; |
| 124 | interrupts = <45>; |
| 125 | clocks = <&clks 120>, <&clks 57>; |
| 126 | clock-names = "ipg", "per"; |
| 127 | status = "disabled"; |
| 128 | }; |
| 129 | |
| 130 | uart2: serial@43f94000 { |
| 131 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| 132 | reg = <0x43f94000 0x4000>; |
| 133 | interrupts = <32>; |
| 134 | clocks = <&clks 121>, <&clks 57>; |
| 135 | clock-names = "ipg", "per"; |
| 136 | status = "disabled"; |
| 137 | }; |
| 138 | |
| 139 | i2c2: i2c@43f98000 { |
| 140 | #address-cells = <1>; |
| 141 | #size-cells = <0>; |
| 142 | compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; |
| 143 | reg = <0x43f98000 0x4000>; |
| 144 | clocks = <&clks 48>; |
| 145 | clock-names = ""; |
| 146 | interrupts = <4>; |
| 147 | status = "disabled"; |
| 148 | }; |
| 149 | |
| 150 | owire@43f9c000 { |
| 151 | #address-cells = <1>; |
| 152 | #size-cells = <0>; |
| 153 | reg = <0x43f9c000 0x4000>; |
| 154 | clocks = <&clks 51>; |
| 155 | clock-names = ""; |
| 156 | interrupts = <2>; |
| 157 | status = "disabled"; |
| 158 | }; |
| 159 | |
| 160 | spi1: cspi@43fa4000 { |
| 161 | #address-cells = <1>; |
| 162 | #size-cells = <0>; |
| 163 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; |
| 164 | reg = <0x43fa4000 0x4000>; |
| 165 | clocks = <&clks 78>, <&clks 78>; |
| 166 | clock-names = "ipg", "per"; |
| 167 | interrupts = <14>; |
| 168 | status = "disabled"; |
| 169 | }; |
| 170 | |
| 171 | kpp: kpp@43fa8000 { |
| 172 | #address-cells = <1>; |
| 173 | #size-cells = <0>; |
| 174 | compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; |
| 175 | reg = <0x43fa8000 0x4000>; |
| 176 | clocks = <&clks 102>; |
| 177 | clock-names = ""; |
| 178 | interrupts = <24>; |
| 179 | status = "disabled"; |
| 180 | }; |
| 181 | |
| 182 | iomuxc: iomuxc@43fac000 { |
| 183 | compatible = "fsl,imx25-iomuxc"; |
| 184 | reg = <0x43fac000 0x4000>; |
| 185 | }; |
| 186 | |
| 187 | audmux: audmux@43fb0000 { |
| 188 | compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; |
| 189 | reg = <0x43fb0000 0x4000>; |
| 190 | status = "disabled"; |
| 191 | }; |
| 192 | }; |
| 193 | |
| 194 | spba@50000000 { |
| 195 | compatible = "fsl,spba-bus", "simple-bus"; |
| 196 | #address-cells = <1>; |
| 197 | #size-cells = <1>; |
| 198 | reg = <0x50000000 0x40000>; |
| 199 | ranges; |
| 200 | |
| 201 | spi3: cspi@50004000 { |
| 202 | #address-cells = <1>; |
| 203 | #size-cells = <0>; |
| 204 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; |
| 205 | reg = <0x50004000 0x4000>; |
| 206 | interrupts = <0>; |
| 207 | clocks = <&clks 80>, <&clks 80>; |
| 208 | clock-names = "ipg", "per"; |
| 209 | status = "disabled"; |
| 210 | }; |
| 211 | |
| 212 | uart4: serial@50008000 { |
| 213 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| 214 | reg = <0x50008000 0x4000>; |
| 215 | interrupts = <5>; |
| 216 | clocks = <&clks 123>, <&clks 57>; |
| 217 | clock-names = "ipg", "per"; |
| 218 | status = "disabled"; |
| 219 | }; |
| 220 | |
| 221 | uart3: serial@5000c000 { |
| 222 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| 223 | reg = <0x5000c000 0x4000>; |
| 224 | interrupts = <18>; |
| 225 | clocks = <&clks 122>, <&clks 57>; |
| 226 | clock-names = "ipg", "per"; |
| 227 | status = "disabled"; |
| 228 | }; |
| 229 | |
| 230 | spi2: cspi@50010000 { |
| 231 | #address-cells = <1>; |
| 232 | #size-cells = <0>; |
| 233 | compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; |
| 234 | reg = <0x50010000 0x4000>; |
| 235 | clocks = <&clks 79>, <&clks 79>; |
| 236 | clock-names = "ipg", "per"; |
| 237 | interrupts = <13>; |
| 238 | status = "disabled"; |
| 239 | }; |
| 240 | |
| 241 | ssi2: ssi@50014000 { |
| 242 | #sound-dai-cells = <0>; |
| 243 | compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; |
| 244 | reg = <0x50014000 0x4000>; |
| 245 | interrupts = <11>; |
| 246 | clocks = <&clks 118>; |
| 247 | clock-names = "ipg"; |
| 248 | dmas = <&sdma 24 1 0>, |
| 249 | <&sdma 25 1 0>; |
| 250 | dma-names = "rx", "tx"; |
| 251 | status = "disabled"; |
| 252 | }; |
| 253 | |
| 254 | esai@50018000 { |
| 255 | reg = <0x50018000 0x4000>; |
| 256 | interrupts = <7>; |
| 257 | }; |
| 258 | |
| 259 | uart5: serial@5002c000 { |
| 260 | compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| 261 | reg = <0x5002c000 0x4000>; |
| 262 | interrupts = <40>; |
| 263 | clocks = <&clks 124>, <&clks 57>; |
| 264 | clock-names = "ipg", "per"; |
| 265 | status = "disabled"; |
| 266 | }; |
| 267 | |
| 268 | tsc: tsc@50030000 { |
| 269 | compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; |
| 270 | reg = <0x50030000 0x4000>; |
| 271 | interrupts = <46>; |
| 272 | clocks = <&clks 119>; |
| 273 | clock-names = "ipg"; |
| 274 | status = "disabled"; |
| 275 | }; |
| 276 | |
| 277 | ssi1: ssi@50034000 { |
| 278 | #sound-dai-cells = <0>; |
| 279 | compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; |
| 280 | reg = <0x50034000 0x4000>; |
| 281 | interrupts = <12>; |
| 282 | clocks = <&clks 117>; |
| 283 | clock-names = "ipg"; |
| 284 | dmas = <&sdma 28 1 0>, |
| 285 | <&sdma 29 1 0>; |
| 286 | dma-names = "rx", "tx"; |
| 287 | status = "disabled"; |
| 288 | }; |
| 289 | |
| 290 | fec: ethernet@50038000 { |
| 291 | compatible = "fsl,imx25-fec"; |
| 292 | reg = <0x50038000 0x4000>; |
| 293 | interrupts = <57>; |
| 294 | clocks = <&clks 88>, <&clks 65>; |
| 295 | clock-names = "ipg", "ahb"; |
| 296 | status = "disabled"; |
| 297 | }; |
| 298 | }; |
| 299 | |
| 300 | aips@53f00000 { /* AIPS2 */ |
| 301 | compatible = "fsl,aips-bus", "simple-bus"; |
| 302 | #address-cells = <1>; |
| 303 | #size-cells = <1>; |
| 304 | reg = <0x53f00000 0x100000>; |
| 305 | ranges; |
| 306 | |
| 307 | clks: ccm@53f80000 { |
| 308 | compatible = "fsl,imx25-ccm"; |
| 309 | reg = <0x53f80000 0x4000>; |
| 310 | interrupts = <31>; |
| 311 | #clock-cells = <1>; |
| 312 | }; |
| 313 | |
| 314 | gpt4: timer@53f84000 { |
| 315 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| 316 | reg = <0x53f84000 0x4000>; |
| 317 | clocks = <&clks 95>, <&clks 47>; |
| 318 | clock-names = "ipg", "per"; |
| 319 | interrupts = <1>; |
| 320 | }; |
| 321 | |
| 322 | gpt3: timer@53f88000 { |
| 323 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| 324 | reg = <0x53f88000 0x4000>; |
| 325 | clocks = <&clks 94>, <&clks 47>; |
| 326 | clock-names = "ipg", "per"; |
| 327 | interrupts = <29>; |
| 328 | }; |
| 329 | |
| 330 | gpt2: timer@53f8c000 { |
| 331 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| 332 | reg = <0x53f8c000 0x4000>; |
| 333 | clocks = <&clks 93>, <&clks 47>; |
| 334 | clock-names = "ipg", "per"; |
| 335 | interrupts = <53>; |
| 336 | }; |
| 337 | |
| 338 | gpt1: timer@53f90000 { |
| 339 | compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| 340 | reg = <0x53f90000 0x4000>; |
| 341 | clocks = <&clks 92>, <&clks 47>; |
| 342 | clock-names = "ipg", "per"; |
| 343 | interrupts = <54>; |
| 344 | }; |
| 345 | |
| 346 | epit1: timer@53f94000 { |
| 347 | compatible = "fsl,imx25-epit"; |
| 348 | reg = <0x53f94000 0x4000>; |
| 349 | interrupts = <28>; |
| 350 | }; |
| 351 | |
| 352 | epit2: timer@53f98000 { |
| 353 | compatible = "fsl,imx25-epit"; |
| 354 | reg = <0x53f98000 0x4000>; |
| 355 | interrupts = <27>; |
| 356 | }; |
| 357 | |
| 358 | gpio4: gpio@53f9c000 { |
| 359 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| 360 | reg = <0x53f9c000 0x4000>; |
| 361 | interrupts = <23>; |
| 362 | gpio-controller; |
| 363 | #gpio-cells = <2>; |
| 364 | interrupt-controller; |
| 365 | #interrupt-cells = <2>; |
| 366 | }; |
| 367 | |
| 368 | pwm2: pwm@53fa0000 { |
| 369 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 370 | #pwm-cells = <2>; |
| 371 | reg = <0x53fa0000 0x4000>; |
| 372 | clocks = <&clks 106>, <&clks 52>; |
| 373 | clock-names = "ipg", "per"; |
| 374 | interrupts = <36>; |
| 375 | }; |
| 376 | |
| 377 | gpio3: gpio@53fa4000 { |
| 378 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| 379 | reg = <0x53fa4000 0x4000>; |
| 380 | interrupts = <16>; |
| 381 | gpio-controller; |
| 382 | #gpio-cells = <2>; |
| 383 | interrupt-controller; |
| 384 | #interrupt-cells = <2>; |
| 385 | }; |
| 386 | |
| 387 | pwm3: pwm@53fa8000 { |
| 388 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 389 | #pwm-cells = <2>; |
| 390 | reg = <0x53fa8000 0x4000>; |
| 391 | clocks = <&clks 107>, <&clks 52>; |
| 392 | clock-names = "ipg", "per"; |
| 393 | interrupts = <41>; |
| 394 | }; |
| 395 | |
| 396 | esdhc1: esdhc@53fb4000 { |
| 397 | compatible = "fsl,imx25-esdhc"; |
| 398 | reg = <0x53fb4000 0x4000>; |
| 399 | interrupts = <9>; |
| 400 | clocks = <&clks 86>, <&clks 63>, <&clks 45>; |
| 401 | clock-names = "ipg", "ahb", "per"; |
| 402 | status = "disabled"; |
| 403 | }; |
| 404 | |
| 405 | esdhc2: esdhc@53fb8000 { |
| 406 | compatible = "fsl,imx25-esdhc"; |
| 407 | reg = <0x53fb8000 0x4000>; |
| 408 | interrupts = <8>; |
| 409 | clocks = <&clks 87>, <&clks 64>, <&clks 46>; |
| 410 | clock-names = "ipg", "ahb", "per"; |
| 411 | status = "disabled"; |
| 412 | }; |
| 413 | |
| 414 | lcdc: lcdc@53fbc000 { |
| 415 | compatible = "fsl,imx25-fb", "fsl,imx21-fb"; |
| 416 | reg = <0x53fbc000 0x4000>; |
| 417 | interrupts = <39>; |
| 418 | clocks = <&clks 103>, <&clks 66>, <&clks 49>; |
| 419 | clock-names = "ipg", "ahb", "per"; |
| 420 | status = "disabled"; |
| 421 | }; |
| 422 | |
| 423 | slcdc@53fc0000 { |
| 424 | reg = <0x53fc0000 0x4000>; |
| 425 | interrupts = <38>; |
| 426 | status = "disabled"; |
| 427 | }; |
| 428 | |
| 429 | pwm4: pwm@53fc8000 { |
| 430 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 431 | #pwm-cells = <2>; |
| 432 | reg = <0x53fc8000 0x4000>; |
| 433 | clocks = <&clks 108>, <&clks 52>; |
| 434 | clock-names = "ipg", "per"; |
| 435 | interrupts = <42>; |
| 436 | }; |
| 437 | |
| 438 | gpio1: gpio@53fcc000 { |
| 439 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| 440 | reg = <0x53fcc000 0x4000>; |
| 441 | interrupts = <52>; |
| 442 | gpio-controller; |
| 443 | #gpio-cells = <2>; |
| 444 | interrupt-controller; |
| 445 | #interrupt-cells = <2>; |
| 446 | }; |
| 447 | |
| 448 | gpio2: gpio@53fd0000 { |
| 449 | compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| 450 | reg = <0x53fd0000 0x4000>; |
| 451 | interrupts = <51>; |
| 452 | gpio-controller; |
| 453 | #gpio-cells = <2>; |
| 454 | interrupt-controller; |
| 455 | #interrupt-cells = <2>; |
| 456 | }; |
| 457 | |
| 458 | sdma: sdma@53fd4000 { |
| 459 | compatible = "fsl,imx25-sdma"; |
| 460 | reg = <0x53fd4000 0x4000>; |
| 461 | clocks = <&clks 112>, <&clks 68>; |
| 462 | clock-names = "ipg", "ahb"; |
| 463 | #dma-cells = <3>; |
| 464 | interrupts = <34>; |
| 465 | fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; |
| 466 | }; |
| 467 | |
| 468 | wdog@53fdc000 { |
| 469 | compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; |
| 470 | reg = <0x53fdc000 0x4000>; |
| 471 | clocks = <&clks 126>; |
| 472 | clock-names = ""; |
| 473 | interrupts = <55>; |
| 474 | }; |
| 475 | |
| 476 | pwm1: pwm@53fe0000 { |
| 477 | compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| 478 | #pwm-cells = <2>; |
| 479 | reg = <0x53fe0000 0x4000>; |
| 480 | clocks = <&clks 105>, <&clks 52>; |
| 481 | clock-names = "ipg", "per"; |
| 482 | interrupts = <26>; |
| 483 | }; |
| 484 | |
| 485 | iim: iim@53ff0000 { |
| 486 | compatible = "fsl,imx25-iim", "fsl,imx27-iim"; |
| 487 | reg = <0x53ff0000 0x4000>; |
| 488 | interrupts = <19>; |
| 489 | clocks = <&clks 99>; |
| 490 | }; |
| 491 | |
| 492 | usbotg: usb@53ff4000 { |
| 493 | compatible = "fsl,imx25-usb", "fsl,imx27-usb"; |
| 494 | reg = <0x53ff4000 0x0200>; |
| 495 | interrupts = <37>; |
| 496 | clocks = <&clks 70>; |
| 497 | fsl,usbmisc = <&usbmisc 0>; |
| 498 | fsl,usbphy = <&usbphy0>; |
| 499 | status = "disabled"; |
| 500 | }; |
| 501 | |
| 502 | usbhost1: usb@53ff4400 { |
| 503 | compatible = "fsl,imx25-usb", "fsl,imx27-usb"; |
| 504 | reg = <0x53ff4400 0x0200>; |
| 505 | interrupts = <35>; |
| 506 | clocks = <&clks 70>; |
| 507 | fsl,usbmisc = <&usbmisc 1>; |
| 508 | fsl,usbphy = <&usbphy1>; |
| 509 | status = "disabled"; |
| 510 | }; |
| 511 | |
| 512 | usbmisc: usbmisc@53ff4600 { |
| 513 | #index-cells = <1>; |
| 514 | compatible = "fsl,imx25-usbmisc"; |
| 515 | clocks = <&clks 9>, <&clks 70>, <&clks 8>; |
| 516 | clock-names = "ipg", "ahb", "per"; |
| 517 | reg = <0x53ff4600 0x00f>; |
| 518 | }; |
| 519 | |
| 520 | dryice@53ffc000 { |
| 521 | compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; |
| 522 | reg = <0x53ffc000 0x4000>; |
| 523 | clocks = <&clks 81>; |
| 524 | clock-names = "ipg"; |
| 525 | interrupts = <25>; |
| 526 | }; |
| 527 | }; |
| 528 | |
| 529 | iram: sram@78000000 { |
| 530 | compatible = "mmio-sram"; |
| 531 | reg = <0x78000000 0x20000>; |
| 532 | }; |
| 533 | |
| 534 | emi@80000000 { |
| 535 | compatible = "fsl,emi-bus", "simple-bus"; |
| 536 | #address-cells = <1>; |
| 537 | #size-cells = <1>; |
| 538 | reg = <0x80000000 0x3b002000>; |
| 539 | ranges; |
| 540 | |
| 541 | nfc: nand@bb000000 { |
| 542 | #address-cells = <1>; |
| 543 | #size-cells = <1>; |
| 544 | |
| 545 | compatible = "fsl,imx25-nand"; |
| 546 | reg = <0xbb000000 0x2000>; |
| 547 | clocks = <&clks 50>; |
| 548 | clock-names = ""; |
| 549 | interrupts = <33>; |
| 550 | status = "disabled"; |
| 551 | }; |
| 552 | }; |
| 553 | }; |
| 554 | |
| 555 | usbphy { |
| 556 | compatible = "simple-bus"; |
| 557 | #address-cells = <1>; |
| 558 | #size-cells = <0>; |
| 559 | |
| 560 | usbphy0: usb-phy@0 { |
| 561 | reg = <0>; |
| 562 | compatible = "usb-nop-xceiv"; |
| 563 | }; |
| 564 | |
| 565 | usbphy1: usb-phy@1 { |
| 566 | reg = <1>; |
| 567 | compatible = "usb-nop-xceiv"; |
| 568 | }; |
| 569 | }; |
| 570 | }; |