| Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright (C) 2014 STMicroelectronics Limited. |
| 3 | * Author: Peter Griffin <peter.griffin@linaro.org> |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * publishhed by the Free Software Foundation. |
| 8 | */ |
| 9 | #include "stih418-clock.dtsi" |
| 10 | #include "stih407-family.dtsi" |
| 11 | #include "stih410-pinctrl.dtsi" |
| 12 | / { |
| 13 | cpus { |
| 14 | #address-cells = <1>; |
| 15 | #size-cells = <0>; |
| 16 | cpu@2 { |
| 17 | device_type = "cpu"; |
| 18 | compatible = "arm,cortex-a9"; |
| 19 | reg = <2>; |
| 20 | /* u-boot puts hpen in SBC dmem at 0xa4 offset */ |
| 21 | cpu-release-addr = <0x94100A4>; |
| 22 | }; |
| 23 | cpu@3 { |
| 24 | device_type = "cpu"; |
| 25 | compatible = "arm,cortex-a9"; |
| 26 | reg = <3>; |
| 27 | /* u-boot puts hpen in SBC dmem at 0xa4 offset */ |
| 28 | cpu-release-addr = <0x94100A4>; |
| 29 | }; |
| 30 | }; |
| 31 | |
| 32 | soc { |
| 33 | usb2_picophy1: phy2 { |
| 34 | compatible = "st,stih407-usb2-phy"; |
| 35 | #phy-cells = <0>; |
| 36 | st,syscfg = <&syscfg_core 0xf8 0xf4>; |
| 37 | resets = <&softreset STIH407_PICOPHY_SOFTRESET>, |
| 38 | <&picophyreset STIH407_PICOPHY0_RESET>; |
| 39 | reset-names = "global", "port"; |
| 40 | }; |
| 41 | |
| 42 | usb2_picophy2: phy3 { |
| 43 | compatible = "st,stih407-usb2-phy"; |
| 44 | #phy-cells = <0>; |
| 45 | st,syscfg = <&syscfg_core 0xfc 0xf4>; |
| 46 | resets = <&softreset STIH407_PICOPHY_SOFTRESET>, |
| 47 | <&picophyreset STIH407_PICOPHY1_RESET>; |
| 48 | reset-names = "global", "port"; |
| 49 | }; |
| 50 | |
| 51 | ohci0: usb@9a03c00 { |
| 52 | compatible = "st,st-ohci-300x"; |
| 53 | reg = <0x9a03c00 0x100>; |
| 54 | interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; |
| 55 | clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; |
| 56 | resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, |
| 57 | <&softreset STIH407_USB2_PORT0_SOFTRESET>; |
| 58 | reset-names = "power", "softreset"; |
| 59 | phys = <&usb2_picophy1>; |
| 60 | phy-names = "usb"; |
| 61 | }; |
| 62 | |
| 63 | ehci0: usb@9a03e00 { |
| 64 | compatible = "st,st-ehci-300x"; |
| 65 | reg = <0x9a03e00 0x100>; |
| 66 | interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; |
| 67 | pinctrl-names = "default"; |
| 68 | pinctrl-0 = <&pinctrl_usb0>; |
| 69 | clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; |
| 70 | resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, |
| 71 | <&softreset STIH407_USB2_PORT0_SOFTRESET>; |
| 72 | reset-names = "power", "softreset"; |
| 73 | phys = <&usb2_picophy1>; |
| 74 | phy-names = "usb"; |
| 75 | }; |
| 76 | |
| 77 | ohci1: usb@9a83c00 { |
| 78 | compatible = "st,st-ohci-300x"; |
| 79 | reg = <0x9a83c00 0x100>; |
| 80 | interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; |
| 81 | clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; |
| 82 | resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, |
| 83 | <&softreset STIH407_USB2_PORT1_SOFTRESET>; |
| 84 | reset-names = "power", "softreset"; |
| 85 | phys = <&usb2_picophy2>; |
| 86 | phy-names = "usb"; |
| 87 | }; |
| 88 | |
| 89 | ehci1: usb@9a83e00 { |
| 90 | compatible = "st,st-ehci-300x"; |
| 91 | reg = <0x9a83e00 0x100>; |
| 92 | interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; |
| 93 | pinctrl-names = "default"; |
| 94 | pinctrl-0 = <&pinctrl_usb1>; |
| 95 | clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; |
| 96 | resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, |
| 97 | <&softreset STIH407_USB2_PORT1_SOFTRESET>; |
| 98 | reset-names = "power", "softreset"; |
| 99 | phys = <&usb2_picophy2>; |
| 100 | phy-names = "usb"; |
| 101 | }; |
| 102 | |
| 103 | mmc0: sdhci@09060000 { |
| 104 | assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>; |
| 105 | assigned-clock-parents = <&clk_s_c0_pll1 0>; |
| 106 | assigned-clock-rates = <200000000>; |
| 107 | }; |
| 108 | }; |
| 109 | }; |