blob: 7a13bf2aa439e608b12bb3b70c6f11c7c85bc10d [file] [log] [blame]
Kyle Swenson8d8f6542021-03-15 11:02:55 -06001/*
2 * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&ifc {
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
40 reg = <0x0 0x0 0x8000000>;
41 bank-width = <2>;
42 device-width = <1>;
43 };
44
45 nand@1,0 {
46 #address-cells = <1>;
47 #size-cells = <1>;
48 compatible = "fsl,ifc-nand";
49 reg = <0x1 0x0 0x4000>;
50 };
51};
52
53&soc {
54 spi@7000 {
55 flash@0 {
56 #address-cells = <1>;
57 #size-cells = <1>;
58 compatible = "spansion,s25sl12801";
59 reg = <0>;
60 spi-max-frequency = <30000000>;
61 };
62 };
63
64 i2c@3000 {
65 fpga: fpga@66 {
66 compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
67 reg = <0x66>;
68 };
69 };
70
71 usb@22000 {
72 phy_type = "ulpi";
73 };
74
75 mdio@24000 {
76 phy0: ethernet-phy@0 {
77 reg = <0x0>;
78 };
79
80 phy1: ethernet-phy@1 {
81 reg = <0x1>;
82 };
83
84 tbi0: tbi-phy@11 {
85 reg = <0x1f>;
86 device_type = "tbi-phy";
87 };
88 };
89
90 ptp_clock@b0e00 {
91 compatible = "fsl,etsec-ptp";
92 reg = <0xb0e00 0xb0>;
93 interrupts = <68 2 0 0 69 2 0 0>;
94 fsl,tclk-period = <5>;
95 fsl,tmr-prsc = <2>;
96 fsl,tmr-add = <0xcccccccd>;
97 fsl,tmr-fiper1 = <999999995>;
98 fsl,tmr-fiper2 = <99990>;
99 fsl,max-adj = <249999999>;
100 };
101
102 enet0: ethernet@b0000 {
103 phy-handle = <&phy0>;
104 tbi-handle = <&tbi0>;
105 phy-connection-type = "sgmii";
106 };
107
108 enet1: ethernet@b1000 {
109 phy-handle = <&phy1>;
110 tbi-handle = <&tbi0>;
111 phy-connection-type = "sgmii";
112 };
113};