Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * drivers/dma/imx-sdma.c |
| 3 | * |
| 4 | * This file contains a driver for the Freescale Smart DMA engine |
| 5 | * |
| 6 | * Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> |
| 7 | * |
| 8 | * Based on code from Freescale: |
| 9 | * |
| 10 | * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| 11 | * |
| 12 | * The code contained herein is licensed under the GNU General Public |
| 13 | * License. You may obtain a copy of the GNU General Public License |
| 14 | * Version 2 or later at the following locations: |
| 15 | * |
| 16 | * http://www.opensource.org/licenses/gpl-license.html |
| 17 | * http://www.gnu.org/copyleft/gpl.html |
| 18 | */ |
| 19 | |
| 20 | #include <linux/init.h> |
| 21 | #include <linux/module.h> |
| 22 | #include <linux/types.h> |
| 23 | #include <linux/bitops.h> |
| 24 | #include <linux/mm.h> |
| 25 | #include <linux/interrupt.h> |
| 26 | #include <linux/clk.h> |
| 27 | #include <linux/delay.h> |
| 28 | #include <linux/sched.h> |
| 29 | #include <linux/semaphore.h> |
| 30 | #include <linux/spinlock.h> |
| 31 | #include <linux/device.h> |
| 32 | #include <linux/dma-mapping.h> |
| 33 | #include <linux/firmware.h> |
| 34 | #include <linux/slab.h> |
| 35 | #include <linux/platform_device.h> |
| 36 | #include <linux/dmaengine.h> |
| 37 | #include <linux/of.h> |
| 38 | #include <linux/of_address.h> |
| 39 | #include <linux/of_device.h> |
| 40 | #include <linux/of_dma.h> |
| 41 | |
| 42 | #include <asm/irq.h> |
| 43 | #include <linux/platform_data/dma-imx-sdma.h> |
| 44 | #include <linux/platform_data/dma-imx.h> |
| 45 | #include <linux/regmap.h> |
| 46 | #include <linux/mfd/syscon.h> |
| 47 | #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> |
| 48 | |
| 49 | #include "dmaengine.h" |
| 50 | |
| 51 | /* SDMA registers */ |
| 52 | #define SDMA_H_C0PTR 0x000 |
| 53 | #define SDMA_H_INTR 0x004 |
| 54 | #define SDMA_H_STATSTOP 0x008 |
| 55 | #define SDMA_H_START 0x00c |
| 56 | #define SDMA_H_EVTOVR 0x010 |
| 57 | #define SDMA_H_DSPOVR 0x014 |
| 58 | #define SDMA_H_HOSTOVR 0x018 |
| 59 | #define SDMA_H_EVTPEND 0x01c |
| 60 | #define SDMA_H_DSPENBL 0x020 |
| 61 | #define SDMA_H_RESET 0x024 |
| 62 | #define SDMA_H_EVTERR 0x028 |
| 63 | #define SDMA_H_INTRMSK 0x02c |
| 64 | #define SDMA_H_PSW 0x030 |
| 65 | #define SDMA_H_EVTERRDBG 0x034 |
| 66 | #define SDMA_H_CONFIG 0x038 |
| 67 | #define SDMA_ONCE_ENB 0x040 |
| 68 | #define SDMA_ONCE_DATA 0x044 |
| 69 | #define SDMA_ONCE_INSTR 0x048 |
| 70 | #define SDMA_ONCE_STAT 0x04c |
| 71 | #define SDMA_ONCE_CMD 0x050 |
| 72 | #define SDMA_EVT_MIRROR 0x054 |
| 73 | #define SDMA_ILLINSTADDR 0x058 |
| 74 | #define SDMA_CHN0ADDR 0x05c |
| 75 | #define SDMA_ONCE_RTB 0x060 |
| 76 | #define SDMA_XTRIG_CONF1 0x070 |
| 77 | #define SDMA_XTRIG_CONF2 0x074 |
| 78 | #define SDMA_CHNENBL0_IMX35 0x200 |
| 79 | #define SDMA_CHNENBL0_IMX31 0x080 |
| 80 | #define SDMA_CHNPRI_0 0x100 |
| 81 | |
| 82 | /* |
| 83 | * Buffer descriptor status values. |
| 84 | */ |
| 85 | #define BD_DONE 0x01 |
| 86 | #define BD_WRAP 0x02 |
| 87 | #define BD_CONT 0x04 |
| 88 | #define BD_INTR 0x08 |
| 89 | #define BD_RROR 0x10 |
| 90 | #define BD_LAST 0x20 |
| 91 | #define BD_EXTD 0x80 |
| 92 | |
| 93 | /* |
| 94 | * Data Node descriptor status values. |
| 95 | */ |
| 96 | #define DND_END_OF_FRAME 0x80 |
| 97 | #define DND_END_OF_XFER 0x40 |
| 98 | #define DND_DONE 0x20 |
| 99 | #define DND_UNUSED 0x01 |
| 100 | |
| 101 | /* |
| 102 | * IPCV2 descriptor status values. |
| 103 | */ |
| 104 | #define BD_IPCV2_END_OF_FRAME 0x40 |
| 105 | |
| 106 | #define IPCV2_MAX_NODES 50 |
| 107 | /* |
| 108 | * Error bit set in the CCB status field by the SDMA, |
| 109 | * in setbd routine, in case of a transfer error |
| 110 | */ |
| 111 | #define DATA_ERROR 0x10000000 |
| 112 | |
| 113 | /* |
| 114 | * Buffer descriptor commands. |
| 115 | */ |
| 116 | #define C0_ADDR 0x01 |
| 117 | #define C0_LOAD 0x02 |
| 118 | #define C0_DUMP 0x03 |
| 119 | #define C0_SETCTX 0x07 |
| 120 | #define C0_GETCTX 0x03 |
| 121 | #define C0_SETDM 0x01 |
| 122 | #define C0_SETPM 0x04 |
| 123 | #define C0_GETDM 0x02 |
| 124 | #define C0_GETPM 0x08 |
| 125 | /* |
| 126 | * Change endianness indicator in the BD command field |
| 127 | */ |
| 128 | #define CHANGE_ENDIANNESS 0x80 |
| 129 | |
| 130 | /* |
| 131 | * p_2_p watermark_level description |
| 132 | * Bits Name Description |
| 133 | * 0-7 Lower WML Lower watermark level |
| 134 | * 8 PS 1: Pad Swallowing |
| 135 | * 0: No Pad Swallowing |
| 136 | * 9 PA 1: Pad Adding |
| 137 | * 0: No Pad Adding |
| 138 | * 10 SPDIF If this bit is set both source |
| 139 | * and destination are on SPBA |
| 140 | * 11 Source Bit(SP) 1: Source on SPBA |
| 141 | * 0: Source on AIPS |
| 142 | * 12 Destination Bit(DP) 1: Destination on SPBA |
| 143 | * 0: Destination on AIPS |
| 144 | * 13-15 --------- MUST BE 0 |
| 145 | * 16-23 Higher WML HWML |
| 146 | * 24-27 N Total number of samples after |
| 147 | * which Pad adding/Swallowing |
| 148 | * must be done. It must be odd. |
| 149 | * 28 Lower WML Event(LWE) SDMA events reg to check for |
| 150 | * LWML event mask |
| 151 | * 0: LWE in EVENTS register |
| 152 | * 1: LWE in EVENTS2 register |
| 153 | * 29 Higher WML Event(HWE) SDMA events reg to check for |
| 154 | * HWML event mask |
| 155 | * 0: HWE in EVENTS register |
| 156 | * 1: HWE in EVENTS2 register |
| 157 | * 30 --------- MUST BE 0 |
| 158 | * 31 CONT 1: Amount of samples to be |
| 159 | * transferred is unknown and |
| 160 | * script will keep on |
| 161 | * transferring samples as long as |
| 162 | * both events are detected and |
| 163 | * script must be manually stopped |
| 164 | * by the application |
| 165 | * 0: The amount of samples to be |
| 166 | * transferred is equal to the |
| 167 | * count field of mode word |
| 168 | */ |
| 169 | #define SDMA_WATERMARK_LEVEL_LWML 0xFF |
| 170 | #define SDMA_WATERMARK_LEVEL_PS BIT(8) |
| 171 | #define SDMA_WATERMARK_LEVEL_PA BIT(9) |
| 172 | #define SDMA_WATERMARK_LEVEL_SPDIF BIT(10) |
| 173 | #define SDMA_WATERMARK_LEVEL_SP BIT(11) |
| 174 | #define SDMA_WATERMARK_LEVEL_DP BIT(12) |
| 175 | #define SDMA_WATERMARK_LEVEL_HWML (0xFF << 16) |
| 176 | #define SDMA_WATERMARK_LEVEL_LWE BIT(28) |
| 177 | #define SDMA_WATERMARK_LEVEL_HWE BIT(29) |
| 178 | #define SDMA_WATERMARK_LEVEL_CONT BIT(31) |
| 179 | |
| 180 | /* |
| 181 | * Mode/Count of data node descriptors - IPCv2 |
| 182 | */ |
| 183 | struct sdma_mode_count { |
| 184 | u32 count : 16; /* size of the buffer pointed by this BD */ |
| 185 | u32 status : 8; /* E,R,I,C,W,D status bits stored here */ |
| 186 | u32 command : 8; /* command mostlky used for channel 0 */ |
| 187 | }; |
| 188 | |
| 189 | /* |
| 190 | * Buffer descriptor |
| 191 | */ |
| 192 | struct sdma_buffer_descriptor { |
| 193 | struct sdma_mode_count mode; |
| 194 | u32 buffer_addr; /* address of the buffer described */ |
| 195 | u32 ext_buffer_addr; /* extended buffer address */ |
| 196 | } __attribute__ ((packed)); |
| 197 | |
| 198 | /** |
| 199 | * struct sdma_channel_control - Channel control Block |
| 200 | * |
| 201 | * @current_bd_ptr current buffer descriptor processed |
| 202 | * @base_bd_ptr first element of buffer descriptor array |
| 203 | * @unused padding. The SDMA engine expects an array of 128 byte |
| 204 | * control blocks |
| 205 | */ |
| 206 | struct sdma_channel_control { |
| 207 | u32 current_bd_ptr; |
| 208 | u32 base_bd_ptr; |
| 209 | u32 unused[2]; |
| 210 | } __attribute__ ((packed)); |
| 211 | |
| 212 | /** |
| 213 | * struct sdma_state_registers - SDMA context for a channel |
| 214 | * |
| 215 | * @pc: program counter |
| 216 | * @t: test bit: status of arithmetic & test instruction |
| 217 | * @rpc: return program counter |
| 218 | * @sf: source fault while loading data |
| 219 | * @spc: loop start program counter |
| 220 | * @df: destination fault while storing data |
| 221 | * @epc: loop end program counter |
| 222 | * @lm: loop mode |
| 223 | */ |
| 224 | struct sdma_state_registers { |
| 225 | u32 pc :14; |
| 226 | u32 unused1: 1; |
| 227 | u32 t : 1; |
| 228 | u32 rpc :14; |
| 229 | u32 unused0: 1; |
| 230 | u32 sf : 1; |
| 231 | u32 spc :14; |
| 232 | u32 unused2: 1; |
| 233 | u32 df : 1; |
| 234 | u32 epc :14; |
| 235 | u32 lm : 2; |
| 236 | } __attribute__ ((packed)); |
| 237 | |
| 238 | /** |
| 239 | * struct sdma_context_data - sdma context specific to a channel |
| 240 | * |
| 241 | * @channel_state: channel state bits |
| 242 | * @gReg: general registers |
| 243 | * @mda: burst dma destination address register |
| 244 | * @msa: burst dma source address register |
| 245 | * @ms: burst dma status register |
| 246 | * @md: burst dma data register |
| 247 | * @pda: peripheral dma destination address register |
| 248 | * @psa: peripheral dma source address register |
| 249 | * @ps: peripheral dma status register |
| 250 | * @pd: peripheral dma data register |
| 251 | * @ca: CRC polynomial register |
| 252 | * @cs: CRC accumulator register |
| 253 | * @dda: dedicated core destination address register |
| 254 | * @dsa: dedicated core source address register |
| 255 | * @ds: dedicated core status register |
| 256 | * @dd: dedicated core data register |
| 257 | */ |
| 258 | struct sdma_context_data { |
| 259 | struct sdma_state_registers channel_state; |
| 260 | u32 gReg[8]; |
| 261 | u32 mda; |
| 262 | u32 msa; |
| 263 | u32 ms; |
| 264 | u32 md; |
| 265 | u32 pda; |
| 266 | u32 psa; |
| 267 | u32 ps; |
| 268 | u32 pd; |
| 269 | u32 ca; |
| 270 | u32 cs; |
| 271 | u32 dda; |
| 272 | u32 dsa; |
| 273 | u32 ds; |
| 274 | u32 dd; |
| 275 | u32 scratch0; |
| 276 | u32 scratch1; |
| 277 | u32 scratch2; |
| 278 | u32 scratch3; |
| 279 | u32 scratch4; |
| 280 | u32 scratch5; |
| 281 | u32 scratch6; |
| 282 | u32 scratch7; |
| 283 | } __attribute__ ((packed)); |
| 284 | |
| 285 | #define NUM_BD (int)(PAGE_SIZE / sizeof(struct sdma_buffer_descriptor)) |
| 286 | |
| 287 | struct sdma_engine; |
| 288 | |
| 289 | /** |
| 290 | * struct sdma_channel - housekeeping for a SDMA channel |
| 291 | * |
| 292 | * @sdma pointer to the SDMA engine for this channel |
| 293 | * @channel the channel number, matches dmaengine chan_id + 1 |
| 294 | * @direction transfer type. Needed for setting SDMA script |
| 295 | * @peripheral_type Peripheral type. Needed for setting SDMA script |
| 296 | * @event_id0 aka dma request line |
| 297 | * @event_id1 for channels that use 2 events |
| 298 | * @word_size peripheral access size |
| 299 | * @buf_tail ID of the buffer that was processed |
| 300 | * @num_bd max NUM_BD. number of descriptors currently handling |
| 301 | */ |
| 302 | struct sdma_channel { |
| 303 | struct sdma_engine *sdma; |
| 304 | unsigned int channel; |
| 305 | enum dma_transfer_direction direction; |
| 306 | enum sdma_peripheral_type peripheral_type; |
| 307 | unsigned int event_id0; |
| 308 | unsigned int event_id1; |
| 309 | enum dma_slave_buswidth word_size; |
| 310 | unsigned int buf_tail; |
| 311 | unsigned int num_bd; |
| 312 | unsigned int period_len; |
| 313 | struct sdma_buffer_descriptor *bd; |
| 314 | dma_addr_t bd_phys; |
| 315 | unsigned int pc_from_device, pc_to_device; |
| 316 | unsigned int device_to_device; |
| 317 | unsigned long flags; |
| 318 | dma_addr_t per_address, per_address2; |
| 319 | unsigned long event_mask[2]; |
| 320 | unsigned long watermark_level; |
| 321 | u32 shp_addr, per_addr; |
| 322 | struct dma_chan chan; |
| 323 | spinlock_t lock; |
| 324 | struct dma_async_tx_descriptor desc; |
| 325 | enum dma_status status; |
| 326 | unsigned int chn_count; |
| 327 | unsigned int chn_real_count; |
| 328 | struct tasklet_struct tasklet; |
| 329 | struct imx_dma_data data; |
| 330 | }; |
| 331 | |
| 332 | #define IMX_DMA_SG_LOOP BIT(0) |
| 333 | |
| 334 | #define MAX_DMA_CHANNELS 32 |
| 335 | #define MXC_SDMA_DEFAULT_PRIORITY 1 |
| 336 | #define MXC_SDMA_MIN_PRIORITY 1 |
| 337 | #define MXC_SDMA_MAX_PRIORITY 7 |
| 338 | |
| 339 | #define SDMA_FIRMWARE_MAGIC 0x414d4453 |
| 340 | |
| 341 | /** |
| 342 | * struct sdma_firmware_header - Layout of the firmware image |
| 343 | * |
| 344 | * @magic "SDMA" |
| 345 | * @version_major increased whenever layout of struct sdma_script_start_addrs |
| 346 | * changes. |
| 347 | * @version_minor firmware minor version (for binary compatible changes) |
| 348 | * @script_addrs_start offset of struct sdma_script_start_addrs in this image |
| 349 | * @num_script_addrs Number of script addresses in this image |
| 350 | * @ram_code_start offset of SDMA ram image in this firmware image |
| 351 | * @ram_code_size size of SDMA ram image |
| 352 | * @script_addrs Stores the start address of the SDMA scripts |
| 353 | * (in SDMA memory space) |
| 354 | */ |
| 355 | struct sdma_firmware_header { |
| 356 | u32 magic; |
| 357 | u32 version_major; |
| 358 | u32 version_minor; |
| 359 | u32 script_addrs_start; |
| 360 | u32 num_script_addrs; |
| 361 | u32 ram_code_start; |
| 362 | u32 ram_code_size; |
| 363 | }; |
| 364 | |
| 365 | struct sdma_driver_data { |
| 366 | int chnenbl0; |
| 367 | int num_events; |
| 368 | struct sdma_script_start_addrs *script_addrs; |
| 369 | }; |
| 370 | |
| 371 | struct sdma_engine { |
| 372 | struct device *dev; |
| 373 | struct device_dma_parameters dma_parms; |
| 374 | struct sdma_channel channel[MAX_DMA_CHANNELS]; |
| 375 | struct sdma_channel_control *channel_control; |
| 376 | void __iomem *regs; |
| 377 | struct sdma_context_data *context; |
| 378 | dma_addr_t context_phys; |
| 379 | struct dma_device dma_device; |
| 380 | struct clk *clk_ipg; |
| 381 | struct clk *clk_ahb; |
| 382 | spinlock_t channel_0_lock; |
| 383 | u32 script_number; |
| 384 | struct sdma_script_start_addrs *script_addrs; |
| 385 | const struct sdma_driver_data *drvdata; |
| 386 | u32 spba_start_addr; |
| 387 | u32 spba_end_addr; |
| 388 | }; |
| 389 | |
| 390 | static struct sdma_driver_data sdma_imx31 = { |
| 391 | .chnenbl0 = SDMA_CHNENBL0_IMX31, |
| 392 | .num_events = 32, |
| 393 | }; |
| 394 | |
| 395 | static struct sdma_script_start_addrs sdma_script_imx25 = { |
| 396 | .ap_2_ap_addr = 729, |
| 397 | .uart_2_mcu_addr = 904, |
| 398 | .per_2_app_addr = 1255, |
| 399 | .mcu_2_app_addr = 834, |
| 400 | .uartsh_2_mcu_addr = 1120, |
| 401 | .per_2_shp_addr = 1329, |
| 402 | .mcu_2_shp_addr = 1048, |
| 403 | .ata_2_mcu_addr = 1560, |
| 404 | .mcu_2_ata_addr = 1479, |
| 405 | .app_2_per_addr = 1189, |
| 406 | .app_2_mcu_addr = 770, |
| 407 | .shp_2_per_addr = 1407, |
| 408 | .shp_2_mcu_addr = 979, |
| 409 | }; |
| 410 | |
| 411 | static struct sdma_driver_data sdma_imx25 = { |
| 412 | .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| 413 | .num_events = 48, |
| 414 | .script_addrs = &sdma_script_imx25, |
| 415 | }; |
| 416 | |
| 417 | static struct sdma_driver_data sdma_imx35 = { |
| 418 | .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| 419 | .num_events = 48, |
| 420 | }; |
| 421 | |
| 422 | static struct sdma_script_start_addrs sdma_script_imx51 = { |
| 423 | .ap_2_ap_addr = 642, |
| 424 | .uart_2_mcu_addr = 817, |
| 425 | .mcu_2_app_addr = 747, |
| 426 | .mcu_2_shp_addr = 961, |
| 427 | .ata_2_mcu_addr = 1473, |
| 428 | .mcu_2_ata_addr = 1392, |
| 429 | .app_2_per_addr = 1033, |
| 430 | .app_2_mcu_addr = 683, |
| 431 | .shp_2_per_addr = 1251, |
| 432 | .shp_2_mcu_addr = 892, |
| 433 | }; |
| 434 | |
| 435 | static struct sdma_driver_data sdma_imx51 = { |
| 436 | .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| 437 | .num_events = 48, |
| 438 | .script_addrs = &sdma_script_imx51, |
| 439 | }; |
| 440 | |
| 441 | static struct sdma_script_start_addrs sdma_script_imx53 = { |
| 442 | .ap_2_ap_addr = 642, |
| 443 | .app_2_mcu_addr = 683, |
| 444 | .mcu_2_app_addr = 747, |
| 445 | .uart_2_mcu_addr = 817, |
| 446 | .shp_2_mcu_addr = 891, |
| 447 | .mcu_2_shp_addr = 960, |
| 448 | .uartsh_2_mcu_addr = 1032, |
| 449 | .spdif_2_mcu_addr = 1100, |
| 450 | .mcu_2_spdif_addr = 1134, |
| 451 | .firi_2_mcu_addr = 1193, |
| 452 | .mcu_2_firi_addr = 1290, |
| 453 | }; |
| 454 | |
| 455 | static struct sdma_driver_data sdma_imx53 = { |
| 456 | .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| 457 | .num_events = 48, |
| 458 | .script_addrs = &sdma_script_imx53, |
| 459 | }; |
| 460 | |
| 461 | static struct sdma_script_start_addrs sdma_script_imx6q = { |
| 462 | .ap_2_ap_addr = 642, |
| 463 | .uart_2_mcu_addr = 817, |
| 464 | .mcu_2_app_addr = 747, |
| 465 | .per_2_per_addr = 6331, |
| 466 | .uartsh_2_mcu_addr = 1032, |
| 467 | .mcu_2_shp_addr = 960, |
| 468 | .app_2_mcu_addr = 683, |
| 469 | .shp_2_mcu_addr = 891, |
| 470 | .spdif_2_mcu_addr = 1100, |
| 471 | .mcu_2_spdif_addr = 1134, |
| 472 | }; |
| 473 | |
| 474 | static struct sdma_driver_data sdma_imx6q = { |
| 475 | .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| 476 | .num_events = 48, |
| 477 | .script_addrs = &sdma_script_imx6q, |
| 478 | }; |
| 479 | |
| 480 | static const struct platform_device_id sdma_devtypes[] = { |
| 481 | { |
| 482 | .name = "imx25-sdma", |
| 483 | .driver_data = (unsigned long)&sdma_imx25, |
| 484 | }, { |
| 485 | .name = "imx31-sdma", |
| 486 | .driver_data = (unsigned long)&sdma_imx31, |
| 487 | }, { |
| 488 | .name = "imx35-sdma", |
| 489 | .driver_data = (unsigned long)&sdma_imx35, |
| 490 | }, { |
| 491 | .name = "imx51-sdma", |
| 492 | .driver_data = (unsigned long)&sdma_imx51, |
| 493 | }, { |
| 494 | .name = "imx53-sdma", |
| 495 | .driver_data = (unsigned long)&sdma_imx53, |
| 496 | }, { |
| 497 | .name = "imx6q-sdma", |
| 498 | .driver_data = (unsigned long)&sdma_imx6q, |
| 499 | }, { |
| 500 | /* sentinel */ |
| 501 | } |
| 502 | }; |
| 503 | MODULE_DEVICE_TABLE(platform, sdma_devtypes); |
| 504 | |
| 505 | static const struct of_device_id sdma_dt_ids[] = { |
| 506 | { .compatible = "fsl,imx6q-sdma", .data = &sdma_imx6q, }, |
| 507 | { .compatible = "fsl,imx53-sdma", .data = &sdma_imx53, }, |
| 508 | { .compatible = "fsl,imx51-sdma", .data = &sdma_imx51, }, |
| 509 | { .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, }, |
| 510 | { .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, }, |
| 511 | { .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, }, |
| 512 | { /* sentinel */ } |
| 513 | }; |
| 514 | MODULE_DEVICE_TABLE(of, sdma_dt_ids); |
| 515 | |
| 516 | #define SDMA_H_CONFIG_DSPDMA BIT(12) /* indicates if the DSPDMA is used */ |
| 517 | #define SDMA_H_CONFIG_RTD_PINS BIT(11) /* indicates if Real-Time Debug pins are enabled */ |
| 518 | #define SDMA_H_CONFIG_ACR BIT(4) /* indicates if AHB freq /core freq = 2 or 1 */ |
| 519 | #define SDMA_H_CONFIG_CSM (3) /* indicates which context switch mode is selected*/ |
| 520 | |
| 521 | static inline u32 chnenbl_ofs(struct sdma_engine *sdma, unsigned int event) |
| 522 | { |
| 523 | u32 chnenbl0 = sdma->drvdata->chnenbl0; |
| 524 | return chnenbl0 + event * 4; |
| 525 | } |
| 526 | |
| 527 | static int sdma_config_ownership(struct sdma_channel *sdmac, |
| 528 | bool event_override, bool mcu_override, bool dsp_override) |
| 529 | { |
| 530 | struct sdma_engine *sdma = sdmac->sdma; |
| 531 | int channel = sdmac->channel; |
| 532 | unsigned long evt, mcu, dsp; |
| 533 | |
| 534 | if (event_override && mcu_override && dsp_override) |
| 535 | return -EINVAL; |
| 536 | |
| 537 | evt = readl_relaxed(sdma->regs + SDMA_H_EVTOVR); |
| 538 | mcu = readl_relaxed(sdma->regs + SDMA_H_HOSTOVR); |
| 539 | dsp = readl_relaxed(sdma->regs + SDMA_H_DSPOVR); |
| 540 | |
| 541 | if (dsp_override) |
| 542 | __clear_bit(channel, &dsp); |
| 543 | else |
| 544 | __set_bit(channel, &dsp); |
| 545 | |
| 546 | if (event_override) |
| 547 | __clear_bit(channel, &evt); |
| 548 | else |
| 549 | __set_bit(channel, &evt); |
| 550 | |
| 551 | if (mcu_override) |
| 552 | __clear_bit(channel, &mcu); |
| 553 | else |
| 554 | __set_bit(channel, &mcu); |
| 555 | |
| 556 | writel_relaxed(evt, sdma->regs + SDMA_H_EVTOVR); |
| 557 | writel_relaxed(mcu, sdma->regs + SDMA_H_HOSTOVR); |
| 558 | writel_relaxed(dsp, sdma->regs + SDMA_H_DSPOVR); |
| 559 | |
| 560 | return 0; |
| 561 | } |
| 562 | |
| 563 | static void sdma_enable_channel(struct sdma_engine *sdma, int channel) |
| 564 | { |
| 565 | writel(BIT(channel), sdma->regs + SDMA_H_START); |
| 566 | } |
| 567 | |
| 568 | /* |
| 569 | * sdma_run_channel0 - run a channel and wait till it's done |
| 570 | */ |
| 571 | static int sdma_run_channel0(struct sdma_engine *sdma) |
| 572 | { |
| 573 | int ret; |
| 574 | unsigned long timeout = 500; |
| 575 | |
| 576 | sdma_enable_channel(sdma, 0); |
| 577 | |
| 578 | while (!(ret = readl_relaxed(sdma->regs + SDMA_H_INTR) & 1)) { |
| 579 | if (timeout-- <= 0) |
| 580 | break; |
| 581 | udelay(1); |
| 582 | } |
| 583 | |
| 584 | if (ret) { |
| 585 | /* Clear the interrupt status */ |
| 586 | writel_relaxed(ret, sdma->regs + SDMA_H_INTR); |
| 587 | } else { |
| 588 | dev_err(sdma->dev, "Timeout waiting for CH0 ready\n"); |
| 589 | } |
| 590 | |
| 591 | /* Set bits of CONFIG register with dynamic context switching */ |
| 592 | if (readl(sdma->regs + SDMA_H_CONFIG) == 0) |
| 593 | writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); |
| 594 | |
| 595 | return ret ? 0 : -ETIMEDOUT; |
| 596 | } |
| 597 | |
| 598 | static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, |
| 599 | u32 address) |
| 600 | { |
| 601 | struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd; |
| 602 | void *buf_virt; |
| 603 | dma_addr_t buf_phys; |
| 604 | int ret; |
| 605 | unsigned long flags; |
| 606 | |
| 607 | buf_virt = dma_alloc_coherent(NULL, |
| 608 | size, |
| 609 | &buf_phys, GFP_KERNEL); |
| 610 | if (!buf_virt) { |
| 611 | return -ENOMEM; |
| 612 | } |
| 613 | |
| 614 | spin_lock_irqsave(&sdma->channel_0_lock, flags); |
| 615 | |
| 616 | bd0->mode.command = C0_SETPM; |
| 617 | bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| 618 | bd0->mode.count = size / 2; |
| 619 | bd0->buffer_addr = buf_phys; |
| 620 | bd0->ext_buffer_addr = address; |
| 621 | |
| 622 | memcpy(buf_virt, buf, size); |
| 623 | |
| 624 | ret = sdma_run_channel0(sdma); |
| 625 | |
| 626 | spin_unlock_irqrestore(&sdma->channel_0_lock, flags); |
| 627 | |
| 628 | dma_free_coherent(NULL, size, buf_virt, buf_phys); |
| 629 | |
| 630 | return ret; |
| 631 | } |
| 632 | |
| 633 | static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event) |
| 634 | { |
| 635 | struct sdma_engine *sdma = sdmac->sdma; |
| 636 | int channel = sdmac->channel; |
| 637 | unsigned long val; |
| 638 | u32 chnenbl = chnenbl_ofs(sdma, event); |
| 639 | |
| 640 | val = readl_relaxed(sdma->regs + chnenbl); |
| 641 | __set_bit(channel, &val); |
| 642 | writel_relaxed(val, sdma->regs + chnenbl); |
| 643 | } |
| 644 | |
| 645 | static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) |
| 646 | { |
| 647 | struct sdma_engine *sdma = sdmac->sdma; |
| 648 | int channel = sdmac->channel; |
| 649 | u32 chnenbl = chnenbl_ofs(sdma, event); |
| 650 | unsigned long val; |
| 651 | |
| 652 | val = readl_relaxed(sdma->regs + chnenbl); |
| 653 | __clear_bit(channel, &val); |
| 654 | writel_relaxed(val, sdma->regs + chnenbl); |
| 655 | } |
| 656 | |
| 657 | static void sdma_handle_channel_loop(struct sdma_channel *sdmac) |
| 658 | { |
| 659 | if (sdmac->desc.callback) |
| 660 | sdmac->desc.callback(sdmac->desc.callback_param); |
| 661 | } |
| 662 | |
| 663 | static void sdma_update_channel_loop(struct sdma_channel *sdmac) |
| 664 | { |
| 665 | struct sdma_buffer_descriptor *bd; |
| 666 | |
| 667 | /* |
| 668 | * loop mode. Iterate over descriptors, re-setup them and |
| 669 | * call callback function. |
| 670 | */ |
| 671 | while (1) { |
| 672 | bd = &sdmac->bd[sdmac->buf_tail]; |
| 673 | |
| 674 | if (bd->mode.status & BD_DONE) |
| 675 | break; |
| 676 | |
| 677 | if (bd->mode.status & BD_RROR) |
| 678 | sdmac->status = DMA_ERROR; |
| 679 | |
| 680 | bd->mode.status |= BD_DONE; |
| 681 | sdmac->buf_tail++; |
| 682 | sdmac->buf_tail %= sdmac->num_bd; |
| 683 | } |
| 684 | } |
| 685 | |
| 686 | static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac) |
| 687 | { |
| 688 | struct sdma_buffer_descriptor *bd; |
| 689 | int i, error = 0; |
| 690 | |
| 691 | sdmac->chn_real_count = 0; |
| 692 | /* |
| 693 | * non loop mode. Iterate over all descriptors, collect |
| 694 | * errors and call callback function |
| 695 | */ |
| 696 | for (i = 0; i < sdmac->num_bd; i++) { |
| 697 | bd = &sdmac->bd[i]; |
| 698 | |
| 699 | if (bd->mode.status & (BD_DONE | BD_RROR)) |
| 700 | error = -EIO; |
| 701 | sdmac->chn_real_count += bd->mode.count; |
| 702 | } |
| 703 | |
| 704 | if (error) |
| 705 | sdmac->status = DMA_ERROR; |
| 706 | else |
| 707 | sdmac->status = DMA_COMPLETE; |
| 708 | |
| 709 | dma_cookie_complete(&sdmac->desc); |
| 710 | if (sdmac->desc.callback) |
| 711 | sdmac->desc.callback(sdmac->desc.callback_param); |
| 712 | } |
| 713 | |
| 714 | static void sdma_tasklet(unsigned long data) |
| 715 | { |
| 716 | struct sdma_channel *sdmac = (struct sdma_channel *) data; |
| 717 | |
| 718 | if (sdmac->flags & IMX_DMA_SG_LOOP) |
| 719 | sdma_handle_channel_loop(sdmac); |
| 720 | else |
| 721 | mxc_sdma_handle_channel_normal(sdmac); |
| 722 | } |
| 723 | |
| 724 | static irqreturn_t sdma_int_handler(int irq, void *dev_id) |
| 725 | { |
| 726 | struct sdma_engine *sdma = dev_id; |
| 727 | unsigned long stat; |
| 728 | |
| 729 | stat = readl_relaxed(sdma->regs + SDMA_H_INTR); |
| 730 | /* not interested in channel 0 interrupts */ |
| 731 | stat &= ~1; |
| 732 | writel_relaxed(stat, sdma->regs + SDMA_H_INTR); |
| 733 | |
| 734 | while (stat) { |
| 735 | int channel = fls(stat) - 1; |
| 736 | struct sdma_channel *sdmac = &sdma->channel[channel]; |
| 737 | |
| 738 | if (sdmac->flags & IMX_DMA_SG_LOOP) |
| 739 | sdma_update_channel_loop(sdmac); |
| 740 | |
| 741 | tasklet_schedule(&sdmac->tasklet); |
| 742 | |
| 743 | __clear_bit(channel, &stat); |
| 744 | } |
| 745 | |
| 746 | return IRQ_HANDLED; |
| 747 | } |
| 748 | |
| 749 | /* |
| 750 | * sets the pc of SDMA script according to the peripheral type |
| 751 | */ |
| 752 | static void sdma_get_pc(struct sdma_channel *sdmac, |
| 753 | enum sdma_peripheral_type peripheral_type) |
| 754 | { |
| 755 | struct sdma_engine *sdma = sdmac->sdma; |
| 756 | int per_2_emi = 0, emi_2_per = 0; |
| 757 | /* |
| 758 | * These are needed once we start to support transfers between |
| 759 | * two peripherals or memory-to-memory transfers |
| 760 | */ |
| 761 | int per_2_per = 0, emi_2_emi = 0; |
| 762 | |
| 763 | sdmac->pc_from_device = 0; |
| 764 | sdmac->pc_to_device = 0; |
| 765 | sdmac->device_to_device = 0; |
| 766 | |
| 767 | switch (peripheral_type) { |
| 768 | case IMX_DMATYPE_MEMORY: |
| 769 | emi_2_emi = sdma->script_addrs->ap_2_ap_addr; |
| 770 | break; |
| 771 | case IMX_DMATYPE_DSP: |
| 772 | emi_2_per = sdma->script_addrs->bp_2_ap_addr; |
| 773 | per_2_emi = sdma->script_addrs->ap_2_bp_addr; |
| 774 | break; |
| 775 | case IMX_DMATYPE_FIRI: |
| 776 | per_2_emi = sdma->script_addrs->firi_2_mcu_addr; |
| 777 | emi_2_per = sdma->script_addrs->mcu_2_firi_addr; |
| 778 | break; |
| 779 | case IMX_DMATYPE_UART: |
| 780 | per_2_emi = sdma->script_addrs->uart_2_mcu_addr; |
| 781 | emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| 782 | break; |
| 783 | case IMX_DMATYPE_UART_SP: |
| 784 | per_2_emi = sdma->script_addrs->uartsh_2_mcu_addr; |
| 785 | emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| 786 | break; |
| 787 | case IMX_DMATYPE_ATA: |
| 788 | per_2_emi = sdma->script_addrs->ata_2_mcu_addr; |
| 789 | emi_2_per = sdma->script_addrs->mcu_2_ata_addr; |
| 790 | break; |
| 791 | case IMX_DMATYPE_CSPI: |
| 792 | case IMX_DMATYPE_EXT: |
| 793 | case IMX_DMATYPE_SSI: |
| 794 | case IMX_DMATYPE_SAI: |
| 795 | per_2_emi = sdma->script_addrs->app_2_mcu_addr; |
| 796 | emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| 797 | break; |
| 798 | case IMX_DMATYPE_SSI_DUAL: |
| 799 | per_2_emi = sdma->script_addrs->ssish_2_mcu_addr; |
| 800 | emi_2_per = sdma->script_addrs->mcu_2_ssish_addr; |
| 801 | break; |
| 802 | case IMX_DMATYPE_SSI_SP: |
| 803 | case IMX_DMATYPE_MMC: |
| 804 | case IMX_DMATYPE_SDHC: |
| 805 | case IMX_DMATYPE_CSPI_SP: |
| 806 | case IMX_DMATYPE_ESAI: |
| 807 | case IMX_DMATYPE_MSHC_SP: |
| 808 | per_2_emi = sdma->script_addrs->shp_2_mcu_addr; |
| 809 | emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| 810 | break; |
| 811 | case IMX_DMATYPE_ASRC: |
| 812 | per_2_emi = sdma->script_addrs->asrc_2_mcu_addr; |
| 813 | emi_2_per = sdma->script_addrs->asrc_2_mcu_addr; |
| 814 | per_2_per = sdma->script_addrs->per_2_per_addr; |
| 815 | break; |
| 816 | case IMX_DMATYPE_ASRC_SP: |
| 817 | per_2_emi = sdma->script_addrs->shp_2_mcu_addr; |
| 818 | emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| 819 | per_2_per = sdma->script_addrs->per_2_per_addr; |
| 820 | break; |
| 821 | case IMX_DMATYPE_MSHC: |
| 822 | per_2_emi = sdma->script_addrs->mshc_2_mcu_addr; |
| 823 | emi_2_per = sdma->script_addrs->mcu_2_mshc_addr; |
| 824 | break; |
| 825 | case IMX_DMATYPE_CCM: |
| 826 | per_2_emi = sdma->script_addrs->dptc_dvfs_addr; |
| 827 | break; |
| 828 | case IMX_DMATYPE_SPDIF: |
| 829 | per_2_emi = sdma->script_addrs->spdif_2_mcu_addr; |
| 830 | emi_2_per = sdma->script_addrs->mcu_2_spdif_addr; |
| 831 | break; |
| 832 | case IMX_DMATYPE_IPU_MEMORY: |
| 833 | emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; |
| 834 | break; |
| 835 | default: |
| 836 | break; |
| 837 | } |
| 838 | |
| 839 | sdmac->pc_from_device = per_2_emi; |
| 840 | sdmac->pc_to_device = emi_2_per; |
| 841 | sdmac->device_to_device = per_2_per; |
| 842 | } |
| 843 | |
| 844 | static int sdma_load_context(struct sdma_channel *sdmac) |
| 845 | { |
| 846 | struct sdma_engine *sdma = sdmac->sdma; |
| 847 | int channel = sdmac->channel; |
| 848 | int load_address; |
| 849 | struct sdma_context_data *context = sdma->context; |
| 850 | struct sdma_buffer_descriptor *bd0 = sdma->channel[0].bd; |
| 851 | int ret; |
| 852 | unsigned long flags; |
| 853 | |
| 854 | if (sdmac->direction == DMA_DEV_TO_MEM) |
| 855 | load_address = sdmac->pc_from_device; |
| 856 | else if (sdmac->direction == DMA_DEV_TO_DEV) |
| 857 | load_address = sdmac->device_to_device; |
| 858 | else |
| 859 | load_address = sdmac->pc_to_device; |
| 860 | |
| 861 | if (load_address < 0) |
| 862 | return load_address; |
| 863 | |
| 864 | dev_dbg(sdma->dev, "load_address = %d\n", load_address); |
| 865 | dev_dbg(sdma->dev, "wml = 0x%08x\n", (u32)sdmac->watermark_level); |
| 866 | dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr); |
| 867 | dev_dbg(sdma->dev, "per_addr = 0x%08x\n", sdmac->per_addr); |
| 868 | dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]); |
| 869 | dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]); |
| 870 | |
| 871 | spin_lock_irqsave(&sdma->channel_0_lock, flags); |
| 872 | |
| 873 | memset(context, 0, sizeof(*context)); |
| 874 | context->channel_state.pc = load_address; |
| 875 | |
| 876 | /* Send by context the event mask,base address for peripheral |
| 877 | * and watermark level |
| 878 | */ |
| 879 | context->gReg[0] = sdmac->event_mask[1]; |
| 880 | context->gReg[1] = sdmac->event_mask[0]; |
| 881 | context->gReg[2] = sdmac->per_addr; |
| 882 | context->gReg[6] = sdmac->shp_addr; |
| 883 | context->gReg[7] = sdmac->watermark_level; |
| 884 | |
| 885 | bd0->mode.command = C0_SETDM; |
| 886 | bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| 887 | bd0->mode.count = sizeof(*context) / 4; |
| 888 | bd0->buffer_addr = sdma->context_phys; |
| 889 | bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel; |
| 890 | ret = sdma_run_channel0(sdma); |
| 891 | |
| 892 | spin_unlock_irqrestore(&sdma->channel_0_lock, flags); |
| 893 | |
| 894 | return ret; |
| 895 | } |
| 896 | |
| 897 | static struct sdma_channel *to_sdma_chan(struct dma_chan *chan) |
| 898 | { |
| 899 | return container_of(chan, struct sdma_channel, chan); |
| 900 | } |
| 901 | |
| 902 | static int sdma_disable_channel(struct dma_chan *chan) |
| 903 | { |
| 904 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 905 | struct sdma_engine *sdma = sdmac->sdma; |
| 906 | int channel = sdmac->channel; |
| 907 | |
| 908 | writel_relaxed(BIT(channel), sdma->regs + SDMA_H_STATSTOP); |
| 909 | sdmac->status = DMA_ERROR; |
| 910 | |
| 911 | return 0; |
| 912 | } |
| 913 | |
| 914 | static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac) |
| 915 | { |
| 916 | struct sdma_engine *sdma = sdmac->sdma; |
| 917 | |
| 918 | int lwml = sdmac->watermark_level & SDMA_WATERMARK_LEVEL_LWML; |
| 919 | int hwml = (sdmac->watermark_level & SDMA_WATERMARK_LEVEL_HWML) >> 16; |
| 920 | |
| 921 | set_bit(sdmac->event_id0 % 32, &sdmac->event_mask[1]); |
| 922 | set_bit(sdmac->event_id1 % 32, &sdmac->event_mask[0]); |
| 923 | |
| 924 | if (sdmac->event_id0 > 31) |
| 925 | sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_LWE; |
| 926 | |
| 927 | if (sdmac->event_id1 > 31) |
| 928 | sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_HWE; |
| 929 | |
| 930 | /* |
| 931 | * If LWML(src_maxburst) > HWML(dst_maxburst), we need |
| 932 | * swap LWML and HWML of INFO(A.3.2.5.1), also need swap |
| 933 | * r0(event_mask[1]) and r1(event_mask[0]). |
| 934 | */ |
| 935 | if (lwml > hwml) { |
| 936 | sdmac->watermark_level &= ~(SDMA_WATERMARK_LEVEL_LWML | |
| 937 | SDMA_WATERMARK_LEVEL_HWML); |
| 938 | sdmac->watermark_level |= hwml; |
| 939 | sdmac->watermark_level |= lwml << 16; |
| 940 | swap(sdmac->event_mask[0], sdmac->event_mask[1]); |
| 941 | } |
| 942 | |
| 943 | if (sdmac->per_address2 >= sdma->spba_start_addr && |
| 944 | sdmac->per_address2 <= sdma->spba_end_addr) |
| 945 | sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SP; |
| 946 | |
| 947 | if (sdmac->per_address >= sdma->spba_start_addr && |
| 948 | sdmac->per_address <= sdma->spba_end_addr) |
| 949 | sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP; |
| 950 | |
| 951 | sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT; |
| 952 | } |
| 953 | |
| 954 | static int sdma_config_channel(struct dma_chan *chan) |
| 955 | { |
| 956 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 957 | int ret; |
| 958 | |
| 959 | sdma_disable_channel(chan); |
| 960 | |
| 961 | sdmac->event_mask[0] = 0; |
| 962 | sdmac->event_mask[1] = 0; |
| 963 | sdmac->shp_addr = 0; |
| 964 | sdmac->per_addr = 0; |
| 965 | |
| 966 | if (sdmac->event_id0) { |
| 967 | if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events) |
| 968 | return -EINVAL; |
| 969 | sdma_event_enable(sdmac, sdmac->event_id0); |
| 970 | } |
| 971 | |
| 972 | if (sdmac->event_id1) { |
| 973 | if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events) |
| 974 | return -EINVAL; |
| 975 | sdma_event_enable(sdmac, sdmac->event_id1); |
| 976 | } |
| 977 | |
| 978 | switch (sdmac->peripheral_type) { |
| 979 | case IMX_DMATYPE_DSP: |
| 980 | sdma_config_ownership(sdmac, false, true, true); |
| 981 | break; |
| 982 | case IMX_DMATYPE_MEMORY: |
| 983 | sdma_config_ownership(sdmac, false, true, false); |
| 984 | break; |
| 985 | default: |
| 986 | sdma_config_ownership(sdmac, true, true, false); |
| 987 | break; |
| 988 | } |
| 989 | |
| 990 | sdma_get_pc(sdmac, sdmac->peripheral_type); |
| 991 | |
| 992 | if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) && |
| 993 | (sdmac->peripheral_type != IMX_DMATYPE_DSP)) { |
| 994 | /* Handle multiple event channels differently */ |
| 995 | if (sdmac->event_id1) { |
| 996 | if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP || |
| 997 | sdmac->peripheral_type == IMX_DMATYPE_ASRC) |
| 998 | sdma_set_watermarklevel_for_p2p(sdmac); |
| 999 | } else |
| 1000 | __set_bit(sdmac->event_id0, sdmac->event_mask); |
| 1001 | |
| 1002 | /* Watermark Level */ |
| 1003 | sdmac->watermark_level |= sdmac->watermark_level; |
| 1004 | /* Address */ |
| 1005 | sdmac->shp_addr = sdmac->per_address; |
| 1006 | sdmac->per_addr = sdmac->per_address2; |
| 1007 | } else { |
| 1008 | sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */ |
| 1009 | } |
| 1010 | |
| 1011 | ret = sdma_load_context(sdmac); |
| 1012 | |
| 1013 | return ret; |
| 1014 | } |
| 1015 | |
| 1016 | static int sdma_set_channel_priority(struct sdma_channel *sdmac, |
| 1017 | unsigned int priority) |
| 1018 | { |
| 1019 | struct sdma_engine *sdma = sdmac->sdma; |
| 1020 | int channel = sdmac->channel; |
| 1021 | |
| 1022 | if (priority < MXC_SDMA_MIN_PRIORITY |
| 1023 | || priority > MXC_SDMA_MAX_PRIORITY) { |
| 1024 | return -EINVAL; |
| 1025 | } |
| 1026 | |
| 1027 | writel_relaxed(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel); |
| 1028 | |
| 1029 | return 0; |
| 1030 | } |
| 1031 | |
| 1032 | static int sdma_request_channel(struct sdma_channel *sdmac) |
| 1033 | { |
| 1034 | struct sdma_engine *sdma = sdmac->sdma; |
| 1035 | int channel = sdmac->channel; |
| 1036 | int ret = -EBUSY; |
| 1037 | |
| 1038 | sdmac->bd = dma_zalloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys, |
| 1039 | GFP_KERNEL); |
| 1040 | if (!sdmac->bd) { |
| 1041 | ret = -ENOMEM; |
| 1042 | goto out; |
| 1043 | } |
| 1044 | |
| 1045 | sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys; |
| 1046 | sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| 1047 | |
| 1048 | sdma_set_channel_priority(sdmac, MXC_SDMA_DEFAULT_PRIORITY); |
| 1049 | return 0; |
| 1050 | out: |
| 1051 | |
| 1052 | return ret; |
| 1053 | } |
| 1054 | |
| 1055 | static dma_cookie_t sdma_tx_submit(struct dma_async_tx_descriptor *tx) |
| 1056 | { |
| 1057 | unsigned long flags; |
| 1058 | struct sdma_channel *sdmac = to_sdma_chan(tx->chan); |
| 1059 | dma_cookie_t cookie; |
| 1060 | |
| 1061 | spin_lock_irqsave(&sdmac->lock, flags); |
| 1062 | |
| 1063 | cookie = dma_cookie_assign(tx); |
| 1064 | |
| 1065 | spin_unlock_irqrestore(&sdmac->lock, flags); |
| 1066 | |
| 1067 | return cookie; |
| 1068 | } |
| 1069 | |
| 1070 | static int sdma_alloc_chan_resources(struct dma_chan *chan) |
| 1071 | { |
| 1072 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1073 | struct imx_dma_data *data = chan->private; |
| 1074 | int prio, ret; |
| 1075 | |
| 1076 | if (!data) |
| 1077 | return -EINVAL; |
| 1078 | |
| 1079 | switch (data->priority) { |
| 1080 | case DMA_PRIO_HIGH: |
| 1081 | prio = 3; |
| 1082 | break; |
| 1083 | case DMA_PRIO_MEDIUM: |
| 1084 | prio = 2; |
| 1085 | break; |
| 1086 | case DMA_PRIO_LOW: |
| 1087 | default: |
| 1088 | prio = 1; |
| 1089 | break; |
| 1090 | } |
| 1091 | |
| 1092 | sdmac->peripheral_type = data->peripheral_type; |
| 1093 | sdmac->event_id0 = data->dma_request; |
| 1094 | sdmac->event_id1 = data->dma_request2; |
| 1095 | |
| 1096 | ret = clk_enable(sdmac->sdma->clk_ipg); |
| 1097 | if (ret) |
| 1098 | return ret; |
| 1099 | ret = clk_enable(sdmac->sdma->clk_ahb); |
| 1100 | if (ret) |
| 1101 | goto disable_clk_ipg; |
| 1102 | |
| 1103 | ret = sdma_request_channel(sdmac); |
| 1104 | if (ret) |
| 1105 | goto disable_clk_ahb; |
| 1106 | |
| 1107 | ret = sdma_set_channel_priority(sdmac, prio); |
| 1108 | if (ret) |
| 1109 | goto disable_clk_ahb; |
| 1110 | |
| 1111 | dma_async_tx_descriptor_init(&sdmac->desc, chan); |
| 1112 | sdmac->desc.tx_submit = sdma_tx_submit; |
| 1113 | /* txd.flags will be overwritten in prep funcs */ |
| 1114 | sdmac->desc.flags = DMA_CTRL_ACK; |
| 1115 | |
| 1116 | return 0; |
| 1117 | |
| 1118 | disable_clk_ahb: |
| 1119 | clk_disable(sdmac->sdma->clk_ahb); |
| 1120 | disable_clk_ipg: |
| 1121 | clk_disable(sdmac->sdma->clk_ipg); |
| 1122 | return ret; |
| 1123 | } |
| 1124 | |
| 1125 | static void sdma_free_chan_resources(struct dma_chan *chan) |
| 1126 | { |
| 1127 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1128 | struct sdma_engine *sdma = sdmac->sdma; |
| 1129 | |
| 1130 | sdma_disable_channel(chan); |
| 1131 | |
| 1132 | if (sdmac->event_id0) |
| 1133 | sdma_event_disable(sdmac, sdmac->event_id0); |
| 1134 | if (sdmac->event_id1) |
| 1135 | sdma_event_disable(sdmac, sdmac->event_id1); |
| 1136 | |
| 1137 | sdmac->event_id0 = 0; |
| 1138 | sdmac->event_id1 = 0; |
| 1139 | |
| 1140 | sdma_set_channel_priority(sdmac, 0); |
| 1141 | |
| 1142 | dma_free_coherent(NULL, PAGE_SIZE, sdmac->bd, sdmac->bd_phys); |
| 1143 | |
| 1144 | clk_disable(sdma->clk_ipg); |
| 1145 | clk_disable(sdma->clk_ahb); |
| 1146 | } |
| 1147 | |
| 1148 | static struct dma_async_tx_descriptor *sdma_prep_slave_sg( |
| 1149 | struct dma_chan *chan, struct scatterlist *sgl, |
| 1150 | unsigned int sg_len, enum dma_transfer_direction direction, |
| 1151 | unsigned long flags, void *context) |
| 1152 | { |
| 1153 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1154 | struct sdma_engine *sdma = sdmac->sdma; |
| 1155 | int ret, i, count; |
| 1156 | int channel = sdmac->channel; |
| 1157 | struct scatterlist *sg; |
| 1158 | |
| 1159 | if (sdmac->status == DMA_IN_PROGRESS) |
| 1160 | return NULL; |
| 1161 | sdmac->status = DMA_IN_PROGRESS; |
| 1162 | |
| 1163 | sdmac->flags = 0; |
| 1164 | |
| 1165 | sdmac->buf_tail = 0; |
| 1166 | |
| 1167 | dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n", |
| 1168 | sg_len, channel); |
| 1169 | |
| 1170 | sdmac->direction = direction; |
| 1171 | ret = sdma_load_context(sdmac); |
| 1172 | if (ret) |
| 1173 | goto err_out; |
| 1174 | |
| 1175 | if (sg_len > NUM_BD) { |
| 1176 | dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n", |
| 1177 | channel, sg_len, NUM_BD); |
| 1178 | ret = -EINVAL; |
| 1179 | goto err_out; |
| 1180 | } |
| 1181 | |
| 1182 | sdmac->chn_count = 0; |
| 1183 | for_each_sg(sgl, sg, sg_len, i) { |
| 1184 | struct sdma_buffer_descriptor *bd = &sdmac->bd[i]; |
| 1185 | int param; |
| 1186 | |
| 1187 | bd->buffer_addr = sg->dma_address; |
| 1188 | |
| 1189 | count = sg_dma_len(sg); |
| 1190 | |
| 1191 | if (count > 0xffff) { |
| 1192 | dev_err(sdma->dev, "SDMA channel %d: maximum bytes for sg entry exceeded: %d > %d\n", |
| 1193 | channel, count, 0xffff); |
| 1194 | ret = -EINVAL; |
| 1195 | goto err_out; |
| 1196 | } |
| 1197 | |
| 1198 | bd->mode.count = count; |
| 1199 | sdmac->chn_count += count; |
| 1200 | |
| 1201 | if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) { |
| 1202 | ret = -EINVAL; |
| 1203 | goto err_out; |
| 1204 | } |
| 1205 | |
| 1206 | switch (sdmac->word_size) { |
| 1207 | case DMA_SLAVE_BUSWIDTH_4_BYTES: |
| 1208 | bd->mode.command = 0; |
| 1209 | if (count & 3 || sg->dma_address & 3) |
| 1210 | return NULL; |
| 1211 | break; |
| 1212 | case DMA_SLAVE_BUSWIDTH_2_BYTES: |
| 1213 | bd->mode.command = 2; |
| 1214 | if (count & 1 || sg->dma_address & 1) |
| 1215 | return NULL; |
| 1216 | break; |
| 1217 | case DMA_SLAVE_BUSWIDTH_1_BYTE: |
| 1218 | bd->mode.command = 1; |
| 1219 | break; |
| 1220 | default: |
| 1221 | return NULL; |
| 1222 | } |
| 1223 | |
| 1224 | param = BD_DONE | BD_EXTD | BD_CONT; |
| 1225 | |
| 1226 | if (i + 1 == sg_len) { |
| 1227 | param |= BD_INTR; |
| 1228 | param |= BD_LAST; |
| 1229 | param &= ~BD_CONT; |
| 1230 | } |
| 1231 | |
| 1232 | dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n", |
| 1233 | i, count, (u64)sg->dma_address, |
| 1234 | param & BD_WRAP ? "wrap" : "", |
| 1235 | param & BD_INTR ? " intr" : ""); |
| 1236 | |
| 1237 | bd->mode.status = param; |
| 1238 | } |
| 1239 | |
| 1240 | sdmac->num_bd = sg_len; |
| 1241 | sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| 1242 | |
| 1243 | return &sdmac->desc; |
| 1244 | err_out: |
| 1245 | sdmac->status = DMA_ERROR; |
| 1246 | return NULL; |
| 1247 | } |
| 1248 | |
| 1249 | static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( |
| 1250 | struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, |
| 1251 | size_t period_len, enum dma_transfer_direction direction, |
| 1252 | unsigned long flags) |
| 1253 | { |
| 1254 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1255 | struct sdma_engine *sdma = sdmac->sdma; |
| 1256 | int num_periods = buf_len / period_len; |
| 1257 | int channel = sdmac->channel; |
| 1258 | int ret, i = 0, buf = 0; |
| 1259 | |
| 1260 | dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); |
| 1261 | |
| 1262 | if (sdmac->status == DMA_IN_PROGRESS) |
| 1263 | return NULL; |
| 1264 | |
| 1265 | sdmac->status = DMA_IN_PROGRESS; |
| 1266 | |
| 1267 | sdmac->buf_tail = 0; |
| 1268 | sdmac->period_len = period_len; |
| 1269 | |
| 1270 | sdmac->flags |= IMX_DMA_SG_LOOP; |
| 1271 | sdmac->direction = direction; |
| 1272 | ret = sdma_load_context(sdmac); |
| 1273 | if (ret) |
| 1274 | goto err_out; |
| 1275 | |
| 1276 | if (num_periods > NUM_BD) { |
| 1277 | dev_err(sdma->dev, "SDMA channel %d: maximum number of sg exceeded: %d > %d\n", |
| 1278 | channel, num_periods, NUM_BD); |
| 1279 | goto err_out; |
| 1280 | } |
| 1281 | |
| 1282 | if (period_len > 0xffff) { |
| 1283 | dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %d > %d\n", |
| 1284 | channel, period_len, 0xffff); |
| 1285 | goto err_out; |
| 1286 | } |
| 1287 | |
| 1288 | while (buf < buf_len) { |
| 1289 | struct sdma_buffer_descriptor *bd = &sdmac->bd[i]; |
| 1290 | int param; |
| 1291 | |
| 1292 | bd->buffer_addr = dma_addr; |
| 1293 | |
| 1294 | bd->mode.count = period_len; |
| 1295 | |
| 1296 | if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) |
| 1297 | goto err_out; |
| 1298 | if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES) |
| 1299 | bd->mode.command = 0; |
| 1300 | else |
| 1301 | bd->mode.command = sdmac->word_size; |
| 1302 | |
| 1303 | param = BD_DONE | BD_EXTD | BD_CONT | BD_INTR; |
| 1304 | if (i + 1 == num_periods) |
| 1305 | param |= BD_WRAP; |
| 1306 | |
| 1307 | dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n", |
| 1308 | i, period_len, (u64)dma_addr, |
| 1309 | param & BD_WRAP ? "wrap" : "", |
| 1310 | param & BD_INTR ? " intr" : ""); |
| 1311 | |
| 1312 | bd->mode.status = param; |
| 1313 | |
| 1314 | dma_addr += period_len; |
| 1315 | buf += period_len; |
| 1316 | |
| 1317 | i++; |
| 1318 | } |
| 1319 | |
| 1320 | sdmac->num_bd = num_periods; |
| 1321 | sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; |
| 1322 | |
| 1323 | return &sdmac->desc; |
| 1324 | err_out: |
| 1325 | sdmac->status = DMA_ERROR; |
| 1326 | return NULL; |
| 1327 | } |
| 1328 | |
| 1329 | static int sdma_config(struct dma_chan *chan, |
| 1330 | struct dma_slave_config *dmaengine_cfg) |
| 1331 | { |
| 1332 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1333 | |
| 1334 | if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) { |
| 1335 | sdmac->per_address = dmaengine_cfg->src_addr; |
| 1336 | sdmac->watermark_level = dmaengine_cfg->src_maxburst * |
| 1337 | dmaengine_cfg->src_addr_width; |
| 1338 | sdmac->word_size = dmaengine_cfg->src_addr_width; |
| 1339 | } else if (dmaengine_cfg->direction == DMA_DEV_TO_DEV) { |
| 1340 | sdmac->per_address2 = dmaengine_cfg->src_addr; |
| 1341 | sdmac->per_address = dmaengine_cfg->dst_addr; |
| 1342 | sdmac->watermark_level = dmaengine_cfg->src_maxburst & |
| 1343 | SDMA_WATERMARK_LEVEL_LWML; |
| 1344 | sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) & |
| 1345 | SDMA_WATERMARK_LEVEL_HWML; |
| 1346 | sdmac->word_size = dmaengine_cfg->dst_addr_width; |
| 1347 | } else { |
| 1348 | sdmac->per_address = dmaengine_cfg->dst_addr; |
| 1349 | sdmac->watermark_level = dmaengine_cfg->dst_maxburst * |
| 1350 | dmaengine_cfg->dst_addr_width; |
| 1351 | sdmac->word_size = dmaengine_cfg->dst_addr_width; |
| 1352 | } |
| 1353 | sdmac->direction = dmaengine_cfg->direction; |
| 1354 | return sdma_config_channel(chan); |
| 1355 | } |
| 1356 | |
| 1357 | static enum dma_status sdma_tx_status(struct dma_chan *chan, |
| 1358 | dma_cookie_t cookie, |
| 1359 | struct dma_tx_state *txstate) |
| 1360 | { |
| 1361 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1362 | u32 residue; |
| 1363 | |
| 1364 | if (sdmac->flags & IMX_DMA_SG_LOOP) |
| 1365 | residue = (sdmac->num_bd - sdmac->buf_tail) * sdmac->period_len; |
| 1366 | else |
| 1367 | residue = sdmac->chn_count - sdmac->chn_real_count; |
| 1368 | |
| 1369 | dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie, |
| 1370 | residue); |
| 1371 | |
| 1372 | return sdmac->status; |
| 1373 | } |
| 1374 | |
| 1375 | static void sdma_issue_pending(struct dma_chan *chan) |
| 1376 | { |
| 1377 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1378 | struct sdma_engine *sdma = sdmac->sdma; |
| 1379 | |
| 1380 | if (sdmac->status == DMA_IN_PROGRESS) |
| 1381 | sdma_enable_channel(sdma, sdmac->channel); |
| 1382 | } |
| 1383 | |
| 1384 | #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 |
| 1385 | #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38 |
| 1386 | #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41 |
| 1387 | |
| 1388 | static void sdma_add_scripts(struct sdma_engine *sdma, |
| 1389 | const struct sdma_script_start_addrs *addr) |
| 1390 | { |
| 1391 | s32 *addr_arr = (u32 *)addr; |
| 1392 | s32 *saddr_arr = (u32 *)sdma->script_addrs; |
| 1393 | int i; |
| 1394 | |
| 1395 | /* use the default firmware in ROM if missing external firmware */ |
| 1396 | if (!sdma->script_number) |
| 1397 | sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; |
| 1398 | |
| 1399 | for (i = 0; i < sdma->script_number; i++) |
| 1400 | if (addr_arr[i] > 0) |
| 1401 | saddr_arr[i] = addr_arr[i]; |
| 1402 | } |
| 1403 | |
| 1404 | static void sdma_load_firmware(const struct firmware *fw, void *context) |
| 1405 | { |
| 1406 | struct sdma_engine *sdma = context; |
| 1407 | const struct sdma_firmware_header *header; |
| 1408 | const struct sdma_script_start_addrs *addr; |
| 1409 | unsigned short *ram_code; |
| 1410 | |
| 1411 | if (!fw) { |
| 1412 | dev_info(sdma->dev, "external firmware not found, using ROM firmware\n"); |
| 1413 | /* In this case we just use the ROM firmware. */ |
| 1414 | return; |
| 1415 | } |
| 1416 | |
| 1417 | if (fw->size < sizeof(*header)) |
| 1418 | goto err_firmware; |
| 1419 | |
| 1420 | header = (struct sdma_firmware_header *)fw->data; |
| 1421 | |
| 1422 | if (header->magic != SDMA_FIRMWARE_MAGIC) |
| 1423 | goto err_firmware; |
| 1424 | if (header->ram_code_start + header->ram_code_size > fw->size) |
| 1425 | goto err_firmware; |
| 1426 | switch (header->version_major) { |
| 1427 | case 1: |
| 1428 | sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; |
| 1429 | break; |
| 1430 | case 2: |
| 1431 | sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2; |
| 1432 | break; |
| 1433 | case 3: |
| 1434 | sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3; |
| 1435 | break; |
| 1436 | default: |
| 1437 | dev_err(sdma->dev, "unknown firmware version\n"); |
| 1438 | goto err_firmware; |
| 1439 | } |
| 1440 | |
| 1441 | addr = (void *)header + header->script_addrs_start; |
| 1442 | ram_code = (void *)header + header->ram_code_start; |
| 1443 | |
| 1444 | clk_enable(sdma->clk_ipg); |
| 1445 | clk_enable(sdma->clk_ahb); |
| 1446 | /* download the RAM image for SDMA */ |
| 1447 | sdma_load_script(sdma, ram_code, |
| 1448 | header->ram_code_size, |
| 1449 | addr->ram_code_start_addr); |
| 1450 | clk_disable(sdma->clk_ipg); |
| 1451 | clk_disable(sdma->clk_ahb); |
| 1452 | |
| 1453 | sdma_add_scripts(sdma, addr); |
| 1454 | |
| 1455 | dev_info(sdma->dev, "loaded firmware %d.%d\n", |
| 1456 | header->version_major, |
| 1457 | header->version_minor); |
| 1458 | |
| 1459 | err_firmware: |
| 1460 | release_firmware(fw); |
| 1461 | } |
| 1462 | |
| 1463 | #define EVENT_REMAP_CELLS 3 |
| 1464 | |
| 1465 | static int sdma_event_remap(struct sdma_engine *sdma) |
| 1466 | { |
| 1467 | struct device_node *np = sdma->dev->of_node; |
| 1468 | struct device_node *gpr_np = of_parse_phandle(np, "gpr", 0); |
| 1469 | struct property *event_remap; |
| 1470 | struct regmap *gpr; |
| 1471 | char propname[] = "fsl,sdma-event-remap"; |
| 1472 | u32 reg, val, shift, num_map, i; |
| 1473 | int ret = 0; |
| 1474 | |
| 1475 | if (IS_ERR(np) || IS_ERR(gpr_np)) |
| 1476 | goto out; |
| 1477 | |
| 1478 | event_remap = of_find_property(np, propname, NULL); |
| 1479 | num_map = event_remap ? (event_remap->length / sizeof(u32)) : 0; |
| 1480 | if (!num_map) { |
| 1481 | dev_dbg(sdma->dev, "no event needs to be remapped\n"); |
| 1482 | goto out; |
| 1483 | } else if (num_map % EVENT_REMAP_CELLS) { |
| 1484 | dev_err(sdma->dev, "the property %s must modulo %d\n", |
| 1485 | propname, EVENT_REMAP_CELLS); |
| 1486 | ret = -EINVAL; |
| 1487 | goto out; |
| 1488 | } |
| 1489 | |
| 1490 | gpr = syscon_node_to_regmap(gpr_np); |
| 1491 | if (IS_ERR(gpr)) { |
| 1492 | dev_err(sdma->dev, "failed to get gpr regmap\n"); |
| 1493 | ret = PTR_ERR(gpr); |
| 1494 | goto out; |
| 1495 | } |
| 1496 | |
| 1497 | for (i = 0; i < num_map; i += EVENT_REMAP_CELLS) { |
| 1498 | ret = of_property_read_u32_index(np, propname, i, ®); |
| 1499 | if (ret) { |
| 1500 | dev_err(sdma->dev, "failed to read property %s index %d\n", |
| 1501 | propname, i); |
| 1502 | goto out; |
| 1503 | } |
| 1504 | |
| 1505 | ret = of_property_read_u32_index(np, propname, i + 1, &shift); |
| 1506 | if (ret) { |
| 1507 | dev_err(sdma->dev, "failed to read property %s index %d\n", |
| 1508 | propname, i + 1); |
| 1509 | goto out; |
| 1510 | } |
| 1511 | |
| 1512 | ret = of_property_read_u32_index(np, propname, i + 2, &val); |
| 1513 | if (ret) { |
| 1514 | dev_err(sdma->dev, "failed to read property %s index %d\n", |
| 1515 | propname, i + 2); |
| 1516 | goto out; |
| 1517 | } |
| 1518 | |
| 1519 | regmap_update_bits(gpr, reg, BIT(shift), val << shift); |
| 1520 | } |
| 1521 | |
| 1522 | out: |
| 1523 | if (!IS_ERR(gpr_np)) |
| 1524 | of_node_put(gpr_np); |
| 1525 | |
| 1526 | return ret; |
| 1527 | } |
| 1528 | |
| 1529 | static int sdma_get_firmware(struct sdma_engine *sdma, |
| 1530 | const char *fw_name) |
| 1531 | { |
| 1532 | int ret; |
| 1533 | |
| 1534 | ret = request_firmware_nowait(THIS_MODULE, |
| 1535 | FW_ACTION_HOTPLUG, fw_name, sdma->dev, |
| 1536 | GFP_KERNEL, sdma, sdma_load_firmware); |
| 1537 | |
| 1538 | return ret; |
| 1539 | } |
| 1540 | |
| 1541 | static int sdma_init(struct sdma_engine *sdma) |
| 1542 | { |
| 1543 | int i, ret; |
| 1544 | dma_addr_t ccb_phys; |
| 1545 | |
| 1546 | ret = clk_enable(sdma->clk_ipg); |
| 1547 | if (ret) |
| 1548 | return ret; |
| 1549 | ret = clk_enable(sdma->clk_ahb); |
| 1550 | if (ret) |
| 1551 | goto disable_clk_ipg; |
| 1552 | |
| 1553 | /* Be sure SDMA has not started yet */ |
| 1554 | writel_relaxed(0, sdma->regs + SDMA_H_C0PTR); |
| 1555 | |
| 1556 | sdma->channel_control = dma_alloc_coherent(NULL, |
| 1557 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control) + |
| 1558 | sizeof(struct sdma_context_data), |
| 1559 | &ccb_phys, GFP_KERNEL); |
| 1560 | |
| 1561 | if (!sdma->channel_control) { |
| 1562 | ret = -ENOMEM; |
| 1563 | goto err_dma_alloc; |
| 1564 | } |
| 1565 | |
| 1566 | sdma->context = (void *)sdma->channel_control + |
| 1567 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| 1568 | sdma->context_phys = ccb_phys + |
| 1569 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| 1570 | |
| 1571 | /* Zero-out the CCB structures array just allocated */ |
| 1572 | memset(sdma->channel_control, 0, |
| 1573 | MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control)); |
| 1574 | |
| 1575 | /* disable all channels */ |
| 1576 | for (i = 0; i < sdma->drvdata->num_events; i++) |
| 1577 | writel_relaxed(0, sdma->regs + chnenbl_ofs(sdma, i)); |
| 1578 | |
| 1579 | /* All channels have priority 0 */ |
| 1580 | for (i = 0; i < MAX_DMA_CHANNELS; i++) |
| 1581 | writel_relaxed(0, sdma->regs + SDMA_CHNPRI_0 + i * 4); |
| 1582 | |
| 1583 | ret = sdma_request_channel(&sdma->channel[0]); |
| 1584 | if (ret) |
| 1585 | goto err_dma_alloc; |
| 1586 | |
| 1587 | sdma_config_ownership(&sdma->channel[0], false, true, false); |
| 1588 | |
| 1589 | /* Set Command Channel (Channel Zero) */ |
| 1590 | writel_relaxed(0x4050, sdma->regs + SDMA_CHN0ADDR); |
| 1591 | |
| 1592 | /* Set bits of CONFIG register but with static context switching */ |
| 1593 | /* FIXME: Check whether to set ACR bit depending on clock ratios */ |
| 1594 | writel_relaxed(0, sdma->regs + SDMA_H_CONFIG); |
| 1595 | |
| 1596 | writel_relaxed(ccb_phys, sdma->regs + SDMA_H_C0PTR); |
| 1597 | |
| 1598 | /* Initializes channel's priorities */ |
| 1599 | sdma_set_channel_priority(&sdma->channel[0], 7); |
| 1600 | |
| 1601 | clk_disable(sdma->clk_ipg); |
| 1602 | clk_disable(sdma->clk_ahb); |
| 1603 | |
| 1604 | return 0; |
| 1605 | |
| 1606 | err_dma_alloc: |
| 1607 | clk_disable(sdma->clk_ahb); |
| 1608 | disable_clk_ipg: |
| 1609 | clk_disable(sdma->clk_ipg); |
| 1610 | dev_err(sdma->dev, "initialisation failed with %d\n", ret); |
| 1611 | return ret; |
| 1612 | } |
| 1613 | |
| 1614 | static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param) |
| 1615 | { |
| 1616 | struct sdma_channel *sdmac = to_sdma_chan(chan); |
| 1617 | struct imx_dma_data *data = fn_param; |
| 1618 | |
| 1619 | if (!imx_dma_is_general_purpose(chan)) |
| 1620 | return false; |
| 1621 | |
| 1622 | sdmac->data = *data; |
| 1623 | chan->private = &sdmac->data; |
| 1624 | |
| 1625 | return true; |
| 1626 | } |
| 1627 | |
| 1628 | static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec, |
| 1629 | struct of_dma *ofdma) |
| 1630 | { |
| 1631 | struct sdma_engine *sdma = ofdma->of_dma_data; |
| 1632 | dma_cap_mask_t mask = sdma->dma_device.cap_mask; |
| 1633 | struct imx_dma_data data; |
| 1634 | |
| 1635 | if (dma_spec->args_count != 3) |
| 1636 | return NULL; |
| 1637 | |
| 1638 | data.dma_request = dma_spec->args[0]; |
| 1639 | data.peripheral_type = dma_spec->args[1]; |
| 1640 | data.priority = dma_spec->args[2]; |
| 1641 | /* |
| 1642 | * init dma_request2 to zero, which is not used by the dts. |
| 1643 | * For P2P, dma_request2 is init from dma_request_channel(), |
| 1644 | * chan->private will point to the imx_dma_data, and in |
| 1645 | * device_alloc_chan_resources(), imx_dma_data.dma_request2 will |
| 1646 | * be set to sdmac->event_id1. |
| 1647 | */ |
| 1648 | data.dma_request2 = 0; |
| 1649 | |
| 1650 | return dma_request_channel(mask, sdma_filter_fn, &data); |
| 1651 | } |
| 1652 | |
| 1653 | static int sdma_probe(struct platform_device *pdev) |
| 1654 | { |
| 1655 | const struct of_device_id *of_id = |
| 1656 | of_match_device(sdma_dt_ids, &pdev->dev); |
| 1657 | struct device_node *np = pdev->dev.of_node; |
| 1658 | struct device_node *spba_bus; |
| 1659 | const char *fw_name; |
| 1660 | int ret; |
| 1661 | int irq; |
| 1662 | struct resource *iores; |
| 1663 | struct resource spba_res; |
| 1664 | struct sdma_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| 1665 | int i; |
| 1666 | struct sdma_engine *sdma; |
| 1667 | s32 *saddr_arr; |
| 1668 | const struct sdma_driver_data *drvdata = NULL; |
| 1669 | |
| 1670 | if (of_id) |
| 1671 | drvdata = of_id->data; |
| 1672 | else if (pdev->id_entry) |
| 1673 | drvdata = (void *)pdev->id_entry->driver_data; |
| 1674 | |
| 1675 | if (!drvdata) { |
| 1676 | dev_err(&pdev->dev, "unable to find driver data\n"); |
| 1677 | return -EINVAL; |
| 1678 | } |
| 1679 | |
| 1680 | ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| 1681 | if (ret) |
| 1682 | return ret; |
| 1683 | |
| 1684 | sdma = devm_kzalloc(&pdev->dev, sizeof(*sdma), GFP_KERNEL); |
| 1685 | if (!sdma) |
| 1686 | return -ENOMEM; |
| 1687 | |
| 1688 | spin_lock_init(&sdma->channel_0_lock); |
| 1689 | |
| 1690 | sdma->dev = &pdev->dev; |
| 1691 | sdma->drvdata = drvdata; |
| 1692 | |
| 1693 | irq = platform_get_irq(pdev, 0); |
| 1694 | if (irq < 0) |
| 1695 | return irq; |
| 1696 | |
| 1697 | iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1698 | sdma->regs = devm_ioremap_resource(&pdev->dev, iores); |
| 1699 | if (IS_ERR(sdma->regs)) |
| 1700 | return PTR_ERR(sdma->regs); |
| 1701 | |
| 1702 | sdma->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); |
| 1703 | if (IS_ERR(sdma->clk_ipg)) |
| 1704 | return PTR_ERR(sdma->clk_ipg); |
| 1705 | |
| 1706 | sdma->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); |
| 1707 | if (IS_ERR(sdma->clk_ahb)) |
| 1708 | return PTR_ERR(sdma->clk_ahb); |
| 1709 | |
| 1710 | clk_prepare(sdma->clk_ipg); |
| 1711 | clk_prepare(sdma->clk_ahb); |
| 1712 | |
| 1713 | ret = devm_request_irq(&pdev->dev, irq, sdma_int_handler, 0, "sdma", |
| 1714 | sdma); |
| 1715 | if (ret) |
| 1716 | return ret; |
| 1717 | |
| 1718 | sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL); |
| 1719 | if (!sdma->script_addrs) |
| 1720 | return -ENOMEM; |
| 1721 | |
| 1722 | /* initially no scripts available */ |
| 1723 | saddr_arr = (s32 *)sdma->script_addrs; |
| 1724 | for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) |
| 1725 | saddr_arr[i] = -EINVAL; |
| 1726 | |
| 1727 | dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask); |
| 1728 | dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask); |
| 1729 | |
| 1730 | INIT_LIST_HEAD(&sdma->dma_device.channels); |
| 1731 | /* Initialize channel parameters */ |
| 1732 | for (i = 0; i < MAX_DMA_CHANNELS; i++) { |
| 1733 | struct sdma_channel *sdmac = &sdma->channel[i]; |
| 1734 | |
| 1735 | sdmac->sdma = sdma; |
| 1736 | spin_lock_init(&sdmac->lock); |
| 1737 | |
| 1738 | sdmac->chan.device = &sdma->dma_device; |
| 1739 | dma_cookie_init(&sdmac->chan); |
| 1740 | sdmac->channel = i; |
| 1741 | |
| 1742 | tasklet_init(&sdmac->tasklet, sdma_tasklet, |
| 1743 | (unsigned long) sdmac); |
| 1744 | /* |
| 1745 | * Add the channel to the DMAC list. Do not add channel 0 though |
| 1746 | * because we need it internally in the SDMA driver. This also means |
| 1747 | * that channel 0 in dmaengine counting matches sdma channel 1. |
| 1748 | */ |
| 1749 | if (i) |
| 1750 | list_add_tail(&sdmac->chan.device_node, |
| 1751 | &sdma->dma_device.channels); |
| 1752 | } |
| 1753 | |
| 1754 | ret = sdma_init(sdma); |
| 1755 | if (ret) |
| 1756 | goto err_init; |
| 1757 | |
| 1758 | ret = sdma_event_remap(sdma); |
| 1759 | if (ret) |
| 1760 | goto err_init; |
| 1761 | |
| 1762 | if (sdma->drvdata->script_addrs) |
| 1763 | sdma_add_scripts(sdma, sdma->drvdata->script_addrs); |
| 1764 | if (pdata && pdata->script_addrs) |
| 1765 | sdma_add_scripts(sdma, pdata->script_addrs); |
| 1766 | |
| 1767 | if (pdata) { |
| 1768 | ret = sdma_get_firmware(sdma, pdata->fw_name); |
| 1769 | if (ret) |
| 1770 | dev_warn(&pdev->dev, "failed to get firmware from platform data\n"); |
| 1771 | } else { |
| 1772 | /* |
| 1773 | * Because that device tree does not encode ROM script address, |
| 1774 | * the RAM script in firmware is mandatory for device tree |
| 1775 | * probe, otherwise it fails. |
| 1776 | */ |
| 1777 | ret = of_property_read_string(np, "fsl,sdma-ram-script-name", |
| 1778 | &fw_name); |
| 1779 | if (ret) |
| 1780 | dev_warn(&pdev->dev, "failed to get firmware name\n"); |
| 1781 | else { |
| 1782 | ret = sdma_get_firmware(sdma, fw_name); |
| 1783 | if (ret) |
| 1784 | dev_warn(&pdev->dev, "failed to get firmware from device tree\n"); |
| 1785 | } |
| 1786 | } |
| 1787 | |
| 1788 | sdma->dma_device.dev = &pdev->dev; |
| 1789 | |
| 1790 | sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources; |
| 1791 | sdma->dma_device.device_free_chan_resources = sdma_free_chan_resources; |
| 1792 | sdma->dma_device.device_tx_status = sdma_tx_status; |
| 1793 | sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg; |
| 1794 | sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic; |
| 1795 | sdma->dma_device.device_config = sdma_config; |
| 1796 | sdma->dma_device.device_terminate_all = sdma_disable_channel; |
| 1797 | sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); |
| 1798 | sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); |
| 1799 | sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); |
| 1800 | sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; |
| 1801 | sdma->dma_device.device_issue_pending = sdma_issue_pending; |
| 1802 | sdma->dma_device.dev->dma_parms = &sdma->dma_parms; |
| 1803 | dma_set_max_seg_size(sdma->dma_device.dev, 65535); |
| 1804 | |
| 1805 | platform_set_drvdata(pdev, sdma); |
| 1806 | |
| 1807 | ret = dma_async_device_register(&sdma->dma_device); |
| 1808 | if (ret) { |
| 1809 | dev_err(&pdev->dev, "unable to register\n"); |
| 1810 | goto err_init; |
| 1811 | } |
| 1812 | |
| 1813 | if (np) { |
| 1814 | ret = of_dma_controller_register(np, sdma_xlate, sdma); |
| 1815 | if (ret) { |
| 1816 | dev_err(&pdev->dev, "failed to register controller\n"); |
| 1817 | goto err_register; |
| 1818 | } |
| 1819 | |
| 1820 | spba_bus = of_find_compatible_node(NULL, NULL, "fsl,spba-bus"); |
| 1821 | ret = of_address_to_resource(spba_bus, 0, &spba_res); |
| 1822 | if (!ret) { |
| 1823 | sdma->spba_start_addr = spba_res.start; |
| 1824 | sdma->spba_end_addr = spba_res.end; |
| 1825 | } |
| 1826 | of_node_put(spba_bus); |
| 1827 | } |
| 1828 | |
| 1829 | return 0; |
| 1830 | |
| 1831 | err_register: |
| 1832 | dma_async_device_unregister(&sdma->dma_device); |
| 1833 | err_init: |
| 1834 | kfree(sdma->script_addrs); |
| 1835 | return ret; |
| 1836 | } |
| 1837 | |
| 1838 | static int sdma_remove(struct platform_device *pdev) |
| 1839 | { |
| 1840 | struct sdma_engine *sdma = platform_get_drvdata(pdev); |
| 1841 | int i; |
| 1842 | |
| 1843 | dma_async_device_unregister(&sdma->dma_device); |
| 1844 | kfree(sdma->script_addrs); |
| 1845 | /* Kill the tasklet */ |
| 1846 | for (i = 0; i < MAX_DMA_CHANNELS; i++) { |
| 1847 | struct sdma_channel *sdmac = &sdma->channel[i]; |
| 1848 | |
| 1849 | tasklet_kill(&sdmac->tasklet); |
| 1850 | } |
| 1851 | |
| 1852 | platform_set_drvdata(pdev, NULL); |
| 1853 | return 0; |
| 1854 | } |
| 1855 | |
| 1856 | static struct platform_driver sdma_driver = { |
| 1857 | .driver = { |
| 1858 | .name = "imx-sdma", |
| 1859 | .of_match_table = sdma_dt_ids, |
| 1860 | }, |
| 1861 | .id_table = sdma_devtypes, |
| 1862 | .remove = sdma_remove, |
| 1863 | .probe = sdma_probe, |
| 1864 | }; |
| 1865 | |
| 1866 | module_platform_driver(sdma_driver); |
| 1867 | |
| 1868 | MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>"); |
| 1869 | MODULE_DESCRIPTION("i.MX SDMA driver"); |
| 1870 | MODULE_LICENSE("GPL"); |