Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * Freescale MMA9551L Intelligent Motion-Sensing Platform driver |
| 3 | * Copyright (c) 2014, Intel Corporation. |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify it |
| 6 | * under the terms and conditions of the GNU General Public License, |
| 7 | * version 2, as published by the Free Software Foundation. |
| 8 | * |
| 9 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 10 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 11 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 12 | * more details. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/i2c.h> |
| 17 | #include <linux/interrupt.h> |
| 18 | #include <linux/slab.h> |
| 19 | #include <linux/acpi.h> |
| 20 | #include <linux/delay.h> |
| 21 | #include <linux/gpio/consumer.h> |
| 22 | #include <linux/iio/iio.h> |
| 23 | #include <linux/iio/sysfs.h> |
| 24 | #include <linux/iio/events.h> |
| 25 | #include <linux/pm_runtime.h> |
| 26 | #include "mma9551_core.h" |
| 27 | |
| 28 | #define MMA9551_DRV_NAME "mma9551" |
| 29 | #define MMA9551_IRQ_NAME "mma9551_event" |
| 30 | #define MMA9551_GPIO_NAME "mma9551_int" |
| 31 | #define MMA9551_GPIO_COUNT 4 |
| 32 | |
| 33 | /* Tilt application (inclination in IIO terms). */ |
| 34 | #define MMA9551_TILT_XZ_ANG_REG 0x00 |
| 35 | #define MMA9551_TILT_YZ_ANG_REG 0x01 |
| 36 | #define MMA9551_TILT_XY_ANG_REG 0x02 |
| 37 | #define MMA9551_TILT_ANGFLG BIT(7) |
| 38 | #define MMA9551_TILT_QUAD_REG 0x03 |
| 39 | #define MMA9551_TILT_XY_QUAD_SHIFT 0 |
| 40 | #define MMA9551_TILT_YZ_QUAD_SHIFT 2 |
| 41 | #define MMA9551_TILT_XZ_QUAD_SHIFT 4 |
| 42 | #define MMA9551_TILT_CFG_REG 0x01 |
| 43 | #define MMA9551_TILT_ANG_THRESH_MASK GENMASK(3, 0) |
| 44 | |
| 45 | #define MMA9551_DEFAULT_SAMPLE_RATE 122 /* Hz */ |
| 46 | |
| 47 | /* Tilt events are mapped to the first three GPIO pins. */ |
| 48 | enum mma9551_tilt_axis { |
| 49 | mma9551_x = 0, |
| 50 | mma9551_y, |
| 51 | mma9551_z, |
| 52 | }; |
| 53 | |
| 54 | struct mma9551_data { |
| 55 | struct i2c_client *client; |
| 56 | struct mutex mutex; |
| 57 | int event_enabled[3]; |
| 58 | int irqs[MMA9551_GPIO_COUNT]; |
| 59 | }; |
| 60 | |
| 61 | static int mma9551_read_incli_chan(struct i2c_client *client, |
| 62 | const struct iio_chan_spec *chan, |
| 63 | int *val) |
| 64 | { |
| 65 | u8 quad_shift, angle, quadrant; |
| 66 | u16 reg_addr; |
| 67 | int ret; |
| 68 | |
| 69 | switch (chan->channel2) { |
| 70 | case IIO_MOD_X: |
| 71 | reg_addr = MMA9551_TILT_YZ_ANG_REG; |
| 72 | quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT; |
| 73 | break; |
| 74 | case IIO_MOD_Y: |
| 75 | reg_addr = MMA9551_TILT_XZ_ANG_REG; |
| 76 | quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT; |
| 77 | break; |
| 78 | case IIO_MOD_Z: |
| 79 | reg_addr = MMA9551_TILT_XY_ANG_REG; |
| 80 | quad_shift = MMA9551_TILT_XY_QUAD_SHIFT; |
| 81 | break; |
| 82 | default: |
| 83 | return -EINVAL; |
| 84 | } |
| 85 | |
| 86 | ret = mma9551_set_power_state(client, true); |
| 87 | if (ret < 0) |
| 88 | return ret; |
| 89 | |
| 90 | ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, |
| 91 | reg_addr, &angle); |
| 92 | if (ret < 0) |
| 93 | goto out_poweroff; |
| 94 | |
| 95 | ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, |
| 96 | MMA9551_TILT_QUAD_REG, &quadrant); |
| 97 | if (ret < 0) |
| 98 | goto out_poweroff; |
| 99 | |
| 100 | angle &= ~MMA9551_TILT_ANGFLG; |
| 101 | quadrant = (quadrant >> quad_shift) & 0x03; |
| 102 | |
| 103 | if (quadrant == 1 || quadrant == 3) |
| 104 | *val = 90 * (quadrant + 1) - angle; |
| 105 | else |
| 106 | *val = angle + 90 * quadrant; |
| 107 | |
| 108 | ret = IIO_VAL_INT; |
| 109 | |
| 110 | out_poweroff: |
| 111 | mma9551_set_power_state(client, false); |
| 112 | return ret; |
| 113 | } |
| 114 | |
| 115 | static int mma9551_read_raw(struct iio_dev *indio_dev, |
| 116 | struct iio_chan_spec const *chan, |
| 117 | int *val, int *val2, long mask) |
| 118 | { |
| 119 | struct mma9551_data *data = iio_priv(indio_dev); |
| 120 | int ret; |
| 121 | |
| 122 | switch (mask) { |
| 123 | case IIO_CHAN_INFO_PROCESSED: |
| 124 | switch (chan->type) { |
| 125 | case IIO_INCLI: |
| 126 | mutex_lock(&data->mutex); |
| 127 | ret = mma9551_read_incli_chan(data->client, chan, val); |
| 128 | mutex_unlock(&data->mutex); |
| 129 | return ret; |
| 130 | default: |
| 131 | return -EINVAL; |
| 132 | } |
| 133 | case IIO_CHAN_INFO_RAW: |
| 134 | switch (chan->type) { |
| 135 | case IIO_ACCEL: |
| 136 | mutex_lock(&data->mutex); |
| 137 | ret = mma9551_read_accel_chan(data->client, |
| 138 | chan, val, val2); |
| 139 | mutex_unlock(&data->mutex); |
| 140 | return ret; |
| 141 | default: |
| 142 | return -EINVAL; |
| 143 | } |
| 144 | case IIO_CHAN_INFO_SCALE: |
| 145 | switch (chan->type) { |
| 146 | case IIO_ACCEL: |
| 147 | return mma9551_read_accel_scale(val, val2); |
| 148 | default: |
| 149 | return -EINVAL; |
| 150 | } |
| 151 | default: |
| 152 | return -EINVAL; |
| 153 | } |
| 154 | } |
| 155 | |
| 156 | static int mma9551_read_event_config(struct iio_dev *indio_dev, |
| 157 | const struct iio_chan_spec *chan, |
| 158 | enum iio_event_type type, |
| 159 | enum iio_event_direction dir) |
| 160 | { |
| 161 | struct mma9551_data *data = iio_priv(indio_dev); |
| 162 | |
| 163 | switch (chan->type) { |
| 164 | case IIO_INCLI: |
| 165 | /* IIO counts axes from 1, because IIO_NO_MOD is 0. */ |
| 166 | return data->event_enabled[chan->channel2 - 1]; |
| 167 | default: |
| 168 | return -EINVAL; |
| 169 | } |
| 170 | } |
| 171 | |
| 172 | static int mma9551_config_incli_event(struct iio_dev *indio_dev, |
| 173 | enum iio_modifier axis, |
| 174 | int state) |
| 175 | { |
| 176 | struct mma9551_data *data = iio_priv(indio_dev); |
| 177 | enum mma9551_tilt_axis mma_axis; |
| 178 | int ret; |
| 179 | |
| 180 | /* IIO counts axes from 1, because IIO_NO_MOD is 0. */ |
| 181 | mma_axis = axis - 1; |
| 182 | |
| 183 | if (data->event_enabled[mma_axis] == state) |
| 184 | return 0; |
| 185 | |
| 186 | if (state == 0) { |
| 187 | ret = mma9551_gpio_config(data->client, |
| 188 | (enum mma9551_gpio_pin)mma_axis, |
| 189 | MMA9551_APPID_NONE, 0, 0); |
| 190 | if (ret < 0) |
| 191 | return ret; |
| 192 | |
| 193 | ret = mma9551_set_power_state(data->client, false); |
| 194 | if (ret < 0) |
| 195 | return ret; |
| 196 | } else { |
| 197 | int bitnum; |
| 198 | |
| 199 | /* Bit 7 of each angle register holds the angle flag. */ |
| 200 | switch (axis) { |
| 201 | case IIO_MOD_X: |
| 202 | bitnum = 7 + 8 * MMA9551_TILT_YZ_ANG_REG; |
| 203 | break; |
| 204 | case IIO_MOD_Y: |
| 205 | bitnum = 7 + 8 * MMA9551_TILT_XZ_ANG_REG; |
| 206 | break; |
| 207 | case IIO_MOD_Z: |
| 208 | bitnum = 7 + 8 * MMA9551_TILT_XY_ANG_REG; |
| 209 | break; |
| 210 | default: |
| 211 | return -EINVAL; |
| 212 | } |
| 213 | |
| 214 | |
| 215 | ret = mma9551_set_power_state(data->client, true); |
| 216 | if (ret < 0) |
| 217 | return ret; |
| 218 | |
| 219 | ret = mma9551_gpio_config(data->client, |
| 220 | (enum mma9551_gpio_pin)mma_axis, |
| 221 | MMA9551_APPID_TILT, bitnum, 0); |
| 222 | if (ret < 0) { |
| 223 | mma9551_set_power_state(data->client, false); |
| 224 | return ret; |
| 225 | } |
| 226 | } |
| 227 | |
| 228 | data->event_enabled[mma_axis] = state; |
| 229 | |
| 230 | return ret; |
| 231 | } |
| 232 | |
| 233 | static int mma9551_write_event_config(struct iio_dev *indio_dev, |
| 234 | const struct iio_chan_spec *chan, |
| 235 | enum iio_event_type type, |
| 236 | enum iio_event_direction dir, |
| 237 | int state) |
| 238 | { |
| 239 | struct mma9551_data *data = iio_priv(indio_dev); |
| 240 | int ret; |
| 241 | |
| 242 | switch (chan->type) { |
| 243 | case IIO_INCLI: |
| 244 | mutex_lock(&data->mutex); |
| 245 | ret = mma9551_config_incli_event(indio_dev, |
| 246 | chan->channel2, state); |
| 247 | mutex_unlock(&data->mutex); |
| 248 | return ret; |
| 249 | default: |
| 250 | return -EINVAL; |
| 251 | } |
| 252 | } |
| 253 | |
| 254 | static int mma9551_write_event_value(struct iio_dev *indio_dev, |
| 255 | const struct iio_chan_spec *chan, |
| 256 | enum iio_event_type type, |
| 257 | enum iio_event_direction dir, |
| 258 | enum iio_event_info info, |
| 259 | int val, int val2) |
| 260 | { |
| 261 | struct mma9551_data *data = iio_priv(indio_dev); |
| 262 | int ret; |
| 263 | |
| 264 | switch (chan->type) { |
| 265 | case IIO_INCLI: |
| 266 | if (val2 != 0 || val < 1 || val > 10) |
| 267 | return -EINVAL; |
| 268 | mutex_lock(&data->mutex); |
| 269 | ret = mma9551_update_config_bits(data->client, |
| 270 | MMA9551_APPID_TILT, |
| 271 | MMA9551_TILT_CFG_REG, |
| 272 | MMA9551_TILT_ANG_THRESH_MASK, |
| 273 | val); |
| 274 | mutex_unlock(&data->mutex); |
| 275 | return ret; |
| 276 | default: |
| 277 | return -EINVAL; |
| 278 | } |
| 279 | } |
| 280 | |
| 281 | static int mma9551_read_event_value(struct iio_dev *indio_dev, |
| 282 | const struct iio_chan_spec *chan, |
| 283 | enum iio_event_type type, |
| 284 | enum iio_event_direction dir, |
| 285 | enum iio_event_info info, |
| 286 | int *val, int *val2) |
| 287 | { |
| 288 | struct mma9551_data *data = iio_priv(indio_dev); |
| 289 | int ret; |
| 290 | u8 tmp; |
| 291 | |
| 292 | switch (chan->type) { |
| 293 | case IIO_INCLI: |
| 294 | mutex_lock(&data->mutex); |
| 295 | ret = mma9551_read_config_byte(data->client, |
| 296 | MMA9551_APPID_TILT, |
| 297 | MMA9551_TILT_CFG_REG, &tmp); |
| 298 | mutex_unlock(&data->mutex); |
| 299 | if (ret < 0) |
| 300 | return ret; |
| 301 | *val = tmp & MMA9551_TILT_ANG_THRESH_MASK; |
| 302 | *val2 = 0; |
| 303 | return IIO_VAL_INT; |
| 304 | default: |
| 305 | return -EINVAL; |
| 306 | } |
| 307 | } |
| 308 | |
| 309 | static const struct iio_event_spec mma9551_incli_event = { |
| 310 | .type = IIO_EV_TYPE_ROC, |
| 311 | .dir = IIO_EV_DIR_RISING, |
| 312 | .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| 313 | .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), |
| 314 | }; |
| 315 | |
| 316 | #define MMA9551_INCLI_CHANNEL(axis) { \ |
| 317 | .type = IIO_INCLI, \ |
| 318 | .modified = 1, \ |
| 319 | .channel2 = axis, \ |
| 320 | .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ |
| 321 | .event_spec = &mma9551_incli_event, \ |
| 322 | .num_event_specs = 1, \ |
| 323 | } |
| 324 | |
| 325 | static const struct iio_chan_spec mma9551_channels[] = { |
| 326 | MMA9551_ACCEL_CHANNEL(IIO_MOD_X), |
| 327 | MMA9551_ACCEL_CHANNEL(IIO_MOD_Y), |
| 328 | MMA9551_ACCEL_CHANNEL(IIO_MOD_Z), |
| 329 | |
| 330 | MMA9551_INCLI_CHANNEL(IIO_MOD_X), |
| 331 | MMA9551_INCLI_CHANNEL(IIO_MOD_Y), |
| 332 | MMA9551_INCLI_CHANNEL(IIO_MOD_Z), |
| 333 | }; |
| 334 | |
| 335 | static const struct iio_info mma9551_info = { |
| 336 | .driver_module = THIS_MODULE, |
| 337 | .read_raw = mma9551_read_raw, |
| 338 | .read_event_config = mma9551_read_event_config, |
| 339 | .write_event_config = mma9551_write_event_config, |
| 340 | .read_event_value = mma9551_read_event_value, |
| 341 | .write_event_value = mma9551_write_event_value, |
| 342 | }; |
| 343 | |
| 344 | static irqreturn_t mma9551_event_handler(int irq, void *private) |
| 345 | { |
| 346 | struct iio_dev *indio_dev = private; |
| 347 | struct mma9551_data *data = iio_priv(indio_dev); |
| 348 | int i, ret, mma_axis = -1; |
| 349 | u16 reg; |
| 350 | u8 val; |
| 351 | |
| 352 | mutex_lock(&data->mutex); |
| 353 | |
| 354 | for (i = 0; i < 3; i++) |
| 355 | if (irq == data->irqs[i]) { |
| 356 | mma_axis = i; |
| 357 | break; |
| 358 | } |
| 359 | |
| 360 | if (mma_axis == -1) { |
| 361 | /* IRQ was triggered on 4th line, which we don't use. */ |
| 362 | dev_warn(&data->client->dev, |
| 363 | "irq triggered on unused line %d\n", data->irqs[3]); |
| 364 | goto out; |
| 365 | } |
| 366 | |
| 367 | switch (mma_axis) { |
| 368 | case mma9551_x: |
| 369 | reg = MMA9551_TILT_YZ_ANG_REG; |
| 370 | break; |
| 371 | case mma9551_y: |
| 372 | reg = MMA9551_TILT_XZ_ANG_REG; |
| 373 | break; |
| 374 | case mma9551_z: |
| 375 | reg = MMA9551_TILT_XY_ANG_REG; |
| 376 | break; |
| 377 | } |
| 378 | |
| 379 | /* |
| 380 | * Read the angle even though we don't use it, otherwise we |
| 381 | * won't get any further interrupts. |
| 382 | */ |
| 383 | ret = mma9551_read_status_byte(data->client, MMA9551_APPID_TILT, |
| 384 | reg, &val); |
| 385 | if (ret < 0) { |
| 386 | dev_err(&data->client->dev, |
| 387 | "error %d reading tilt register in IRQ\n", ret); |
| 388 | goto out; |
| 389 | } |
| 390 | |
| 391 | iio_push_event(indio_dev, |
| 392 | IIO_MOD_EVENT_CODE(IIO_INCLI, 0, (mma_axis + 1), |
| 393 | IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING), |
| 394 | iio_get_time_ns()); |
| 395 | |
| 396 | out: |
| 397 | mutex_unlock(&data->mutex); |
| 398 | |
| 399 | return IRQ_HANDLED; |
| 400 | } |
| 401 | |
| 402 | static int mma9551_init(struct mma9551_data *data) |
| 403 | { |
| 404 | int ret; |
| 405 | |
| 406 | ret = mma9551_read_version(data->client); |
| 407 | if (ret) |
| 408 | return ret; |
| 409 | |
| 410 | return mma9551_set_device_state(data->client, true); |
| 411 | } |
| 412 | |
| 413 | static int mma9551_gpio_probe(struct iio_dev *indio_dev) |
| 414 | { |
| 415 | struct gpio_desc *gpio; |
| 416 | int i, ret; |
| 417 | struct mma9551_data *data = iio_priv(indio_dev); |
| 418 | struct device *dev = &data->client->dev; |
| 419 | |
| 420 | for (i = 0; i < MMA9551_GPIO_COUNT; i++) { |
| 421 | gpio = devm_gpiod_get_index(dev, MMA9551_GPIO_NAME, i, |
| 422 | GPIOD_IN); |
| 423 | if (IS_ERR(gpio)) { |
| 424 | dev_err(dev, "acpi gpio get index failed\n"); |
| 425 | return PTR_ERR(gpio); |
| 426 | } |
| 427 | |
| 428 | ret = gpiod_to_irq(gpio); |
| 429 | if (ret < 0) |
| 430 | return ret; |
| 431 | |
| 432 | data->irqs[i] = ret; |
| 433 | ret = devm_request_threaded_irq(dev, data->irqs[i], |
| 434 | NULL, mma9551_event_handler, |
| 435 | IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| 436 | MMA9551_IRQ_NAME, indio_dev); |
| 437 | if (ret < 0) { |
| 438 | dev_err(dev, "request irq %d failed\n", data->irqs[i]); |
| 439 | return ret; |
| 440 | } |
| 441 | |
| 442 | dev_dbg(dev, "gpio resource, no:%d irq:%d\n", |
| 443 | desc_to_gpio(gpio), data->irqs[i]); |
| 444 | } |
| 445 | |
| 446 | return 0; |
| 447 | } |
| 448 | |
| 449 | static const char *mma9551_match_acpi_device(struct device *dev) |
| 450 | { |
| 451 | const struct acpi_device_id *id; |
| 452 | |
| 453 | id = acpi_match_device(dev->driver->acpi_match_table, dev); |
| 454 | if (!id) |
| 455 | return NULL; |
| 456 | |
| 457 | return dev_name(dev); |
| 458 | } |
| 459 | |
| 460 | static int mma9551_probe(struct i2c_client *client, |
| 461 | const struct i2c_device_id *id) |
| 462 | { |
| 463 | struct mma9551_data *data; |
| 464 | struct iio_dev *indio_dev; |
| 465 | const char *name = NULL; |
| 466 | int ret; |
| 467 | |
| 468 | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| 469 | if (!indio_dev) |
| 470 | return -ENOMEM; |
| 471 | |
| 472 | data = iio_priv(indio_dev); |
| 473 | i2c_set_clientdata(client, indio_dev); |
| 474 | data->client = client; |
| 475 | |
| 476 | if (id) |
| 477 | name = id->name; |
| 478 | else if (ACPI_HANDLE(&client->dev)) |
| 479 | name = mma9551_match_acpi_device(&client->dev); |
| 480 | |
| 481 | ret = mma9551_init(data); |
| 482 | if (ret < 0) |
| 483 | return ret; |
| 484 | |
| 485 | mutex_init(&data->mutex); |
| 486 | |
| 487 | indio_dev->dev.parent = &client->dev; |
| 488 | indio_dev->channels = mma9551_channels; |
| 489 | indio_dev->num_channels = ARRAY_SIZE(mma9551_channels); |
| 490 | indio_dev->name = name; |
| 491 | indio_dev->modes = INDIO_DIRECT_MODE; |
| 492 | indio_dev->info = &mma9551_info; |
| 493 | |
| 494 | ret = mma9551_gpio_probe(indio_dev); |
| 495 | if (ret < 0) |
| 496 | goto out_poweroff; |
| 497 | |
| 498 | ret = iio_device_register(indio_dev); |
| 499 | if (ret < 0) { |
| 500 | dev_err(&client->dev, "unable to register iio device\n"); |
| 501 | goto out_poweroff; |
| 502 | } |
| 503 | |
| 504 | ret = pm_runtime_set_active(&client->dev); |
| 505 | if (ret < 0) |
| 506 | goto out_iio_unregister; |
| 507 | |
| 508 | pm_runtime_enable(&client->dev); |
| 509 | pm_runtime_set_autosuspend_delay(&client->dev, |
| 510 | MMA9551_AUTO_SUSPEND_DELAY_MS); |
| 511 | pm_runtime_use_autosuspend(&client->dev); |
| 512 | |
| 513 | return 0; |
| 514 | |
| 515 | out_iio_unregister: |
| 516 | iio_device_unregister(indio_dev); |
| 517 | out_poweroff: |
| 518 | mma9551_set_device_state(client, false); |
| 519 | |
| 520 | return ret; |
| 521 | } |
| 522 | |
| 523 | static int mma9551_remove(struct i2c_client *client) |
| 524 | { |
| 525 | struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| 526 | struct mma9551_data *data = iio_priv(indio_dev); |
| 527 | |
| 528 | pm_runtime_disable(&client->dev); |
| 529 | pm_runtime_set_suspended(&client->dev); |
| 530 | pm_runtime_put_noidle(&client->dev); |
| 531 | |
| 532 | iio_device_unregister(indio_dev); |
| 533 | mutex_lock(&data->mutex); |
| 534 | mma9551_set_device_state(data->client, false); |
| 535 | mutex_unlock(&data->mutex); |
| 536 | |
| 537 | return 0; |
| 538 | } |
| 539 | |
| 540 | #ifdef CONFIG_PM |
| 541 | static int mma9551_runtime_suspend(struct device *dev) |
| 542 | { |
| 543 | struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| 544 | struct mma9551_data *data = iio_priv(indio_dev); |
| 545 | int ret; |
| 546 | |
| 547 | mutex_lock(&data->mutex); |
| 548 | ret = mma9551_set_device_state(data->client, false); |
| 549 | mutex_unlock(&data->mutex); |
| 550 | if (ret < 0) { |
| 551 | dev_err(&data->client->dev, "powering off device failed\n"); |
| 552 | return -EAGAIN; |
| 553 | } |
| 554 | |
| 555 | return 0; |
| 556 | } |
| 557 | |
| 558 | static int mma9551_runtime_resume(struct device *dev) |
| 559 | { |
| 560 | struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| 561 | struct mma9551_data *data = iio_priv(indio_dev); |
| 562 | int ret; |
| 563 | |
| 564 | ret = mma9551_set_device_state(data->client, true); |
| 565 | if (ret < 0) |
| 566 | return ret; |
| 567 | |
| 568 | mma9551_sleep(MMA9551_DEFAULT_SAMPLE_RATE); |
| 569 | |
| 570 | return 0; |
| 571 | } |
| 572 | #endif |
| 573 | |
| 574 | #ifdef CONFIG_PM_SLEEP |
| 575 | static int mma9551_suspend(struct device *dev) |
| 576 | { |
| 577 | struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| 578 | struct mma9551_data *data = iio_priv(indio_dev); |
| 579 | int ret; |
| 580 | |
| 581 | mutex_lock(&data->mutex); |
| 582 | ret = mma9551_set_device_state(data->client, false); |
| 583 | mutex_unlock(&data->mutex); |
| 584 | |
| 585 | return ret; |
| 586 | } |
| 587 | |
| 588 | static int mma9551_resume(struct device *dev) |
| 589 | { |
| 590 | struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| 591 | struct mma9551_data *data = iio_priv(indio_dev); |
| 592 | int ret; |
| 593 | |
| 594 | mutex_lock(&data->mutex); |
| 595 | ret = mma9551_set_device_state(data->client, true); |
| 596 | mutex_unlock(&data->mutex); |
| 597 | |
| 598 | return ret; |
| 599 | } |
| 600 | #endif |
| 601 | |
| 602 | static const struct dev_pm_ops mma9551_pm_ops = { |
| 603 | SET_SYSTEM_SLEEP_PM_OPS(mma9551_suspend, mma9551_resume) |
| 604 | SET_RUNTIME_PM_OPS(mma9551_runtime_suspend, |
| 605 | mma9551_runtime_resume, NULL) |
| 606 | }; |
| 607 | |
| 608 | static const struct acpi_device_id mma9551_acpi_match[] = { |
| 609 | {"MMA9551", 0}, |
| 610 | {}, |
| 611 | }; |
| 612 | |
| 613 | MODULE_DEVICE_TABLE(acpi, mma9551_acpi_match); |
| 614 | |
| 615 | static const struct i2c_device_id mma9551_id[] = { |
| 616 | {"mma9551", 0}, |
| 617 | {} |
| 618 | }; |
| 619 | |
| 620 | MODULE_DEVICE_TABLE(i2c, mma9551_id); |
| 621 | |
| 622 | static struct i2c_driver mma9551_driver = { |
| 623 | .driver = { |
| 624 | .name = MMA9551_DRV_NAME, |
| 625 | .acpi_match_table = ACPI_PTR(mma9551_acpi_match), |
| 626 | .pm = &mma9551_pm_ops, |
| 627 | }, |
| 628 | .probe = mma9551_probe, |
| 629 | .remove = mma9551_remove, |
| 630 | .id_table = mma9551_id, |
| 631 | }; |
| 632 | |
| 633 | module_i2c_driver(mma9551_driver); |
| 634 | |
| 635 | MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>"); |
| 636 | MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); |
| 637 | MODULE_LICENSE("GPL v2"); |
| 638 | MODULE_DESCRIPTION("MMA9551L motion-sensing platform driver"); |