Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */ |
| 2 | /* |
| 3 | Written 1999-2000 by Donald Becker. |
| 4 | |
| 5 | This software may be used and distributed according to the terms of |
| 6 | the GNU General Public License (GPL), incorporated herein by reference. |
| 7 | Drivers based on or derived from this code fall under the GPL and must |
| 8 | retain the authorship, copyright and license notice. This file is not |
| 9 | a complete program and may only be used when the entire operating |
| 10 | system is licensed under the GPL. |
| 11 | |
| 12 | The author may be reached as becker@scyld.com, or C/O |
| 13 | Scyld Computing Corporation |
| 14 | 410 Severn Ave., Suite 210 |
| 15 | Annapolis MD 21403 |
| 16 | |
| 17 | Support and updates available at |
| 18 | http://www.scyld.com/network/sundance.html |
| 19 | [link no longer provides useful info -jgarzik] |
| 20 | Archives of the mailing list are still available at |
| 21 | http://www.beowulf.org/pipermail/netdrivers/ |
| 22 | |
| 23 | */ |
| 24 | |
| 25 | #define DRV_NAME "sundance" |
| 26 | #define DRV_VERSION "1.2" |
| 27 | #define DRV_RELDATE "11-Sep-2006" |
| 28 | |
| 29 | |
| 30 | /* The user-configurable values. |
| 31 | These may be modified when a driver module is loaded.*/ |
| 32 | static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ |
| 33 | /* Maximum number of multicast addresses to filter (vs. rx-all-multicast). |
| 34 | Typical is a 64 element hash table based on the Ethernet CRC. */ |
| 35 | static const int multicast_filter_limit = 32; |
| 36 | |
| 37 | /* Set the copy breakpoint for the copy-only-tiny-frames scheme. |
| 38 | Setting to > 1518 effectively disables this feature. |
| 39 | This chip can receive into offset buffers, so the Alpha does not |
| 40 | need a copy-align. */ |
| 41 | static int rx_copybreak; |
| 42 | static int flowctrl=1; |
| 43 | |
| 44 | /* media[] specifies the media type the NIC operates at. |
| 45 | autosense Autosensing active media. |
| 46 | 10mbps_hd 10Mbps half duplex. |
| 47 | 10mbps_fd 10Mbps full duplex. |
| 48 | 100mbps_hd 100Mbps half duplex. |
| 49 | 100mbps_fd 100Mbps full duplex. |
| 50 | 0 Autosensing active media. |
| 51 | 1 10Mbps half duplex. |
| 52 | 2 10Mbps full duplex. |
| 53 | 3 100Mbps half duplex. |
| 54 | 4 100Mbps full duplex. |
| 55 | */ |
| 56 | #define MAX_UNITS 8 |
| 57 | static char *media[MAX_UNITS]; |
| 58 | |
| 59 | |
| 60 | /* Operational parameters that are set at compile time. */ |
| 61 | |
| 62 | /* Keep the ring sizes a power of two for compile efficiency. |
| 63 | The compiler will convert <unsigned>'%'<2^N> into a bit mask. |
| 64 | Making the Tx ring too large decreases the effectiveness of channel |
| 65 | bonding and packet priority, and more than 128 requires modifying the |
| 66 | Tx error recovery. |
| 67 | Large receive rings merely waste memory. */ |
| 68 | #define TX_RING_SIZE 32 |
| 69 | #define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used. */ |
| 70 | #define RX_RING_SIZE 64 |
| 71 | #define RX_BUDGET 32 |
| 72 | #define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc) |
| 73 | #define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc) |
| 74 | |
| 75 | /* Operational parameters that usually are not changed. */ |
| 76 | /* Time in jiffies before concluding the transmitter is hung. */ |
| 77 | #define TX_TIMEOUT (4*HZ) |
| 78 | #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ |
| 79 | |
| 80 | /* Include files, designed to support most kernel versions 2.0.0 and later. */ |
| 81 | #include <linux/module.h> |
| 82 | #include <linux/kernel.h> |
| 83 | #include <linux/string.h> |
| 84 | #include <linux/timer.h> |
| 85 | #include <linux/errno.h> |
| 86 | #include <linux/ioport.h> |
| 87 | #include <linux/interrupt.h> |
| 88 | #include <linux/pci.h> |
| 89 | #include <linux/netdevice.h> |
| 90 | #include <linux/etherdevice.h> |
| 91 | #include <linux/skbuff.h> |
| 92 | #include <linux/init.h> |
| 93 | #include <linux/bitops.h> |
| 94 | #include <asm/uaccess.h> |
| 95 | #include <asm/processor.h> /* Processor type for cache alignment. */ |
| 96 | #include <asm/io.h> |
| 97 | #include <linux/delay.h> |
| 98 | #include <linux/spinlock.h> |
| 99 | #include <linux/dma-mapping.h> |
| 100 | #include <linux/crc32.h> |
| 101 | #include <linux/ethtool.h> |
| 102 | #include <linux/mii.h> |
| 103 | |
| 104 | /* These identify the driver base version and may not be removed. */ |
| 105 | static const char version[] = |
| 106 | KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE |
| 107 | " Written by Donald Becker\n"; |
| 108 | |
| 109 | MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); |
| 110 | MODULE_DESCRIPTION("Sundance Alta Ethernet driver"); |
| 111 | MODULE_LICENSE("GPL"); |
| 112 | |
| 113 | module_param(debug, int, 0); |
| 114 | module_param(rx_copybreak, int, 0); |
| 115 | module_param_array(media, charp, NULL, 0); |
| 116 | module_param(flowctrl, int, 0); |
| 117 | MODULE_PARM_DESC(debug, "Sundance Alta debug level (0-5)"); |
| 118 | MODULE_PARM_DESC(rx_copybreak, "Sundance Alta copy breakpoint for copy-only-tiny-frames"); |
| 119 | MODULE_PARM_DESC(flowctrl, "Sundance Alta flow control [0|1]"); |
| 120 | |
| 121 | /* |
| 122 | Theory of Operation |
| 123 | |
| 124 | I. Board Compatibility |
| 125 | |
| 126 | This driver is designed for the Sundance Technologies "Alta" ST201 chip. |
| 127 | |
| 128 | II. Board-specific settings |
| 129 | |
| 130 | III. Driver operation |
| 131 | |
| 132 | IIIa. Ring buffers |
| 133 | |
| 134 | This driver uses two statically allocated fixed-size descriptor lists |
| 135 | formed into rings by a branch from the final descriptor to the beginning of |
| 136 | the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. |
| 137 | Some chips explicitly use only 2^N sized rings, while others use a |
| 138 | 'next descriptor' pointer that the driver forms into rings. |
| 139 | |
| 140 | IIIb/c. Transmit/Receive Structure |
| 141 | |
| 142 | This driver uses a zero-copy receive and transmit scheme. |
| 143 | The driver allocates full frame size skbuffs for the Rx ring buffers at |
| 144 | open() time and passes the skb->data field to the chip as receive data |
| 145 | buffers. When an incoming frame is less than RX_COPYBREAK bytes long, |
| 146 | a fresh skbuff is allocated and the frame is copied to the new skbuff. |
| 147 | When the incoming frame is larger, the skbuff is passed directly up the |
| 148 | protocol stack. Buffers consumed this way are replaced by newly allocated |
| 149 | skbuffs in a later phase of receives. |
| 150 | |
| 151 | The RX_COPYBREAK value is chosen to trade-off the memory wasted by |
| 152 | using a full-sized skbuff for small frames vs. the copying costs of larger |
| 153 | frames. New boards are typically used in generously configured machines |
| 154 | and the underfilled buffers have negligible impact compared to the benefit of |
| 155 | a single allocation size, so the default value of zero results in never |
| 156 | copying packets. When copying is done, the cost is usually mitigated by using |
| 157 | a combined copy/checksum routine. Copying also preloads the cache, which is |
| 158 | most useful with small frames. |
| 159 | |
| 160 | A subtle aspect of the operation is that the IP header at offset 14 in an |
| 161 | ethernet frame isn't longword aligned for further processing. |
| 162 | Unaligned buffers are permitted by the Sundance hardware, so |
| 163 | frames are received into the skbuff at an offset of "+2", 16-byte aligning |
| 164 | the IP header. |
| 165 | |
| 166 | IIId. Synchronization |
| 167 | |
| 168 | The driver runs as two independent, single-threaded flows of control. One |
| 169 | is the send-packet routine, which enforces single-threaded use by the |
| 170 | dev->tbusy flag. The other thread is the interrupt handler, which is single |
| 171 | threaded by the hardware and interrupt handling software. |
| 172 | |
| 173 | The send packet thread has partial control over the Tx ring and 'dev->tbusy' |
| 174 | flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next |
| 175 | queue slot is empty, it clears the tbusy flag when finished otherwise it sets |
| 176 | the 'lp->tx_full' flag. |
| 177 | |
| 178 | The interrupt handler has exclusive control over the Rx ring and records stats |
| 179 | from the Tx ring. After reaping the stats, it marks the Tx queue entry as |
| 180 | empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it |
| 181 | clears both the tx_full and tbusy flags. |
| 182 | |
| 183 | IV. Notes |
| 184 | |
| 185 | IVb. References |
| 186 | |
| 187 | The Sundance ST201 datasheet, preliminary version. |
| 188 | The Kendin KS8723 datasheet, preliminary version. |
| 189 | The ICplus IP100 datasheet, preliminary version. |
| 190 | http://www.scyld.com/expert/100mbps.html |
| 191 | http://www.scyld.com/expert/NWay.html |
| 192 | |
| 193 | IVc. Errata |
| 194 | |
| 195 | */ |
| 196 | |
| 197 | /* Work-around for Kendin chip bugs. */ |
| 198 | #ifndef CONFIG_SUNDANCE_MMIO |
| 199 | #define USE_IO_OPS 1 |
| 200 | #endif |
| 201 | |
| 202 | static const struct pci_device_id sundance_pci_tbl[] = { |
| 203 | { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 }, |
| 204 | { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 }, |
| 205 | { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 }, |
| 206 | { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 }, |
| 207 | { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, |
| 208 | { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, |
| 209 | { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, |
| 210 | { } |
| 211 | }; |
| 212 | MODULE_DEVICE_TABLE(pci, sundance_pci_tbl); |
| 213 | |
| 214 | enum { |
| 215 | netdev_io_size = 128 |
| 216 | }; |
| 217 | |
| 218 | struct pci_id_info { |
| 219 | const char *name; |
| 220 | }; |
| 221 | static const struct pci_id_info pci_id_tbl[] = { |
| 222 | {"D-Link DFE-550TX FAST Ethernet Adapter"}, |
| 223 | {"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"}, |
| 224 | {"D-Link DFE-580TX 4 port Server Adapter"}, |
| 225 | {"D-Link DFE-530TXS FAST Ethernet Adapter"}, |
| 226 | {"D-Link DL10050-based FAST Ethernet Adapter"}, |
| 227 | {"Sundance Technology Alta"}, |
| 228 | {"IC Plus Corporation IP100A FAST Ethernet Adapter"}, |
| 229 | { } /* terminate list. */ |
| 230 | }; |
| 231 | |
| 232 | /* This driver was written to use PCI memory space, however x86-oriented |
| 233 | hardware often uses I/O space accesses. */ |
| 234 | |
| 235 | /* Offsets to the device registers. |
| 236 | Unlike software-only systems, device drivers interact with complex hardware. |
| 237 | It's not useful to define symbolic names for every register bit in the |
| 238 | device. The name can only partially document the semantics and make |
| 239 | the driver longer and more difficult to read. |
| 240 | In general, only the important configuration values or bits changed |
| 241 | multiple times should be defined symbolically. |
| 242 | */ |
| 243 | enum alta_offsets { |
| 244 | DMACtrl = 0x00, |
| 245 | TxListPtr = 0x04, |
| 246 | TxDMABurstThresh = 0x08, |
| 247 | TxDMAUrgentThresh = 0x09, |
| 248 | TxDMAPollPeriod = 0x0a, |
| 249 | RxDMAStatus = 0x0c, |
| 250 | RxListPtr = 0x10, |
| 251 | DebugCtrl0 = 0x1a, |
| 252 | DebugCtrl1 = 0x1c, |
| 253 | RxDMABurstThresh = 0x14, |
| 254 | RxDMAUrgentThresh = 0x15, |
| 255 | RxDMAPollPeriod = 0x16, |
| 256 | LEDCtrl = 0x1a, |
| 257 | ASICCtrl = 0x30, |
| 258 | EEData = 0x34, |
| 259 | EECtrl = 0x36, |
| 260 | FlashAddr = 0x40, |
| 261 | FlashData = 0x44, |
| 262 | WakeEvent = 0x45, |
| 263 | TxStatus = 0x46, |
| 264 | TxFrameId = 0x47, |
| 265 | DownCounter = 0x18, |
| 266 | IntrClear = 0x4a, |
| 267 | IntrEnable = 0x4c, |
| 268 | IntrStatus = 0x4e, |
| 269 | MACCtrl0 = 0x50, |
| 270 | MACCtrl1 = 0x52, |
| 271 | StationAddr = 0x54, |
| 272 | MaxFrameSize = 0x5A, |
| 273 | RxMode = 0x5c, |
| 274 | MIICtrl = 0x5e, |
| 275 | MulticastFilter0 = 0x60, |
| 276 | MulticastFilter1 = 0x64, |
| 277 | RxOctetsLow = 0x68, |
| 278 | RxOctetsHigh = 0x6a, |
| 279 | TxOctetsLow = 0x6c, |
| 280 | TxOctetsHigh = 0x6e, |
| 281 | TxFramesOK = 0x70, |
| 282 | RxFramesOK = 0x72, |
| 283 | StatsCarrierError = 0x74, |
| 284 | StatsLateColl = 0x75, |
| 285 | StatsMultiColl = 0x76, |
| 286 | StatsOneColl = 0x77, |
| 287 | StatsTxDefer = 0x78, |
| 288 | RxMissed = 0x79, |
| 289 | StatsTxXSDefer = 0x7a, |
| 290 | StatsTxAbort = 0x7b, |
| 291 | StatsBcastTx = 0x7c, |
| 292 | StatsBcastRx = 0x7d, |
| 293 | StatsMcastTx = 0x7e, |
| 294 | StatsMcastRx = 0x7f, |
| 295 | /* Aliased and bogus values! */ |
| 296 | RxStatus = 0x0c, |
| 297 | }; |
| 298 | |
| 299 | #define ASIC_HI_WORD(x) ((x) + 2) |
| 300 | |
| 301 | enum ASICCtrl_HiWord_bit { |
| 302 | GlobalReset = 0x0001, |
| 303 | RxReset = 0x0002, |
| 304 | TxReset = 0x0004, |
| 305 | DMAReset = 0x0008, |
| 306 | FIFOReset = 0x0010, |
| 307 | NetworkReset = 0x0020, |
| 308 | HostReset = 0x0040, |
| 309 | ResetBusy = 0x0400, |
| 310 | }; |
| 311 | |
| 312 | /* Bits in the interrupt status/mask registers. */ |
| 313 | enum intr_status_bits { |
| 314 | IntrSummary=0x0001, IntrPCIErr=0x0002, IntrMACCtrl=0x0008, |
| 315 | IntrTxDone=0x0004, IntrRxDone=0x0010, IntrRxStart=0x0020, |
| 316 | IntrDrvRqst=0x0040, |
| 317 | StatsMax=0x0080, LinkChange=0x0100, |
| 318 | IntrTxDMADone=0x0200, IntrRxDMADone=0x0400, |
| 319 | }; |
| 320 | |
| 321 | /* Bits in the RxMode register. */ |
| 322 | enum rx_mode_bits { |
| 323 | AcceptAllIPMulti=0x20, AcceptMultiHash=0x10, AcceptAll=0x08, |
| 324 | AcceptBroadcast=0x04, AcceptMulticast=0x02, AcceptMyPhys=0x01, |
| 325 | }; |
| 326 | /* Bits in MACCtrl. */ |
| 327 | enum mac_ctrl0_bits { |
| 328 | EnbFullDuplex=0x20, EnbRcvLargeFrame=0x40, |
| 329 | EnbFlowCtrl=0x100, EnbPassRxCRC=0x200, |
| 330 | }; |
| 331 | enum mac_ctrl1_bits { |
| 332 | StatsEnable=0x0020, StatsDisable=0x0040, StatsEnabled=0x0080, |
| 333 | TxEnable=0x0100, TxDisable=0x0200, TxEnabled=0x0400, |
| 334 | RxEnable=0x0800, RxDisable=0x1000, RxEnabled=0x2000, |
| 335 | }; |
| 336 | |
| 337 | /* Bits in WakeEvent register. */ |
| 338 | enum wake_event_bits { |
| 339 | WakePktEnable = 0x01, |
| 340 | MagicPktEnable = 0x02, |
| 341 | LinkEventEnable = 0x04, |
| 342 | WolEnable = 0x80, |
| 343 | }; |
| 344 | |
| 345 | /* The Rx and Tx buffer descriptors. */ |
| 346 | /* Note that using only 32 bit fields simplifies conversion to big-endian |
| 347 | architectures. */ |
| 348 | struct netdev_desc { |
| 349 | __le32 next_desc; |
| 350 | __le32 status; |
| 351 | struct desc_frag { __le32 addr, length; } frag[1]; |
| 352 | }; |
| 353 | |
| 354 | /* Bits in netdev_desc.status */ |
| 355 | enum desc_status_bits { |
| 356 | DescOwn=0x8000, |
| 357 | DescEndPacket=0x4000, |
| 358 | DescEndRing=0x2000, |
| 359 | LastFrag=0x80000000, |
| 360 | DescIntrOnTx=0x8000, |
| 361 | DescIntrOnDMADone=0x80000000, |
| 362 | DisableAlign = 0x00000001, |
| 363 | }; |
| 364 | |
| 365 | #define PRIV_ALIGN 15 /* Required alignment mask */ |
| 366 | /* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment |
| 367 | within the structure. */ |
| 368 | #define MII_CNT 4 |
| 369 | struct netdev_private { |
| 370 | /* Descriptor rings first for alignment. */ |
| 371 | struct netdev_desc *rx_ring; |
| 372 | struct netdev_desc *tx_ring; |
| 373 | struct sk_buff* rx_skbuff[RX_RING_SIZE]; |
| 374 | struct sk_buff* tx_skbuff[TX_RING_SIZE]; |
| 375 | dma_addr_t tx_ring_dma; |
| 376 | dma_addr_t rx_ring_dma; |
| 377 | struct timer_list timer; /* Media monitoring timer. */ |
| 378 | /* ethtool extra stats */ |
| 379 | struct { |
| 380 | u64 tx_multiple_collisions; |
| 381 | u64 tx_single_collisions; |
| 382 | u64 tx_late_collisions; |
| 383 | u64 tx_deferred; |
| 384 | u64 tx_deferred_excessive; |
| 385 | u64 tx_aborted; |
| 386 | u64 tx_bcasts; |
| 387 | u64 rx_bcasts; |
| 388 | u64 tx_mcasts; |
| 389 | u64 rx_mcasts; |
| 390 | } xstats; |
| 391 | /* Frequently used values: keep some adjacent for cache effect. */ |
| 392 | spinlock_t lock; |
| 393 | int msg_enable; |
| 394 | int chip_id; |
| 395 | unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ |
| 396 | unsigned int rx_buf_sz; /* Based on MTU+slack. */ |
| 397 | struct netdev_desc *last_tx; /* Last Tx descriptor used. */ |
| 398 | unsigned int cur_tx, dirty_tx; |
| 399 | /* These values are keep track of the transceiver/media in use. */ |
| 400 | unsigned int flowctrl:1; |
| 401 | unsigned int default_port:4; /* Last dev->if_port value. */ |
| 402 | unsigned int an_enable:1; |
| 403 | unsigned int speed; |
| 404 | unsigned int wol_enabled:1; /* Wake on LAN enabled */ |
| 405 | struct tasklet_struct rx_tasklet; |
| 406 | struct tasklet_struct tx_tasklet; |
| 407 | int budget; |
| 408 | int cur_task; |
| 409 | /* Multicast and receive mode. */ |
| 410 | spinlock_t mcastlock; /* SMP lock multicast updates. */ |
| 411 | u16 mcast_filter[4]; |
| 412 | /* MII transceiver section. */ |
| 413 | struct mii_if_info mii_if; |
| 414 | int mii_preamble_required; |
| 415 | unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */ |
| 416 | struct pci_dev *pci_dev; |
| 417 | void __iomem *base; |
| 418 | spinlock_t statlock; |
| 419 | }; |
| 420 | |
| 421 | /* The station address location in the EEPROM. */ |
| 422 | #define EEPROM_SA_OFFSET 0x10 |
| 423 | #define DEFAULT_INTR (IntrRxDMADone | IntrPCIErr | \ |
| 424 | IntrDrvRqst | IntrTxDone | StatsMax | \ |
| 425 | LinkChange) |
| 426 | |
| 427 | static int change_mtu(struct net_device *dev, int new_mtu); |
| 428 | static int eeprom_read(void __iomem *ioaddr, int location); |
| 429 | static int mdio_read(struct net_device *dev, int phy_id, int location); |
| 430 | static void mdio_write(struct net_device *dev, int phy_id, int location, int value); |
| 431 | static int mdio_wait_link(struct net_device *dev, int wait); |
| 432 | static int netdev_open(struct net_device *dev); |
| 433 | static void check_duplex(struct net_device *dev); |
| 434 | static void netdev_timer(unsigned long data); |
| 435 | static void tx_timeout(struct net_device *dev); |
| 436 | static void init_ring(struct net_device *dev); |
| 437 | static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); |
| 438 | static int reset_tx (struct net_device *dev); |
| 439 | static irqreturn_t intr_handler(int irq, void *dev_instance); |
| 440 | static void rx_poll(unsigned long data); |
| 441 | static void tx_poll(unsigned long data); |
| 442 | static void refill_rx (struct net_device *dev); |
| 443 | static void netdev_error(struct net_device *dev, int intr_status); |
| 444 | static void netdev_error(struct net_device *dev, int intr_status); |
| 445 | static void set_rx_mode(struct net_device *dev); |
| 446 | static int __set_mac_addr(struct net_device *dev); |
| 447 | static int sundance_set_mac_addr(struct net_device *dev, void *data); |
| 448 | static struct net_device_stats *get_stats(struct net_device *dev); |
| 449 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
| 450 | static int netdev_close(struct net_device *dev); |
| 451 | static const struct ethtool_ops ethtool_ops; |
| 452 | |
| 453 | static void sundance_reset(struct net_device *dev, unsigned long reset_cmd) |
| 454 | { |
| 455 | struct netdev_private *np = netdev_priv(dev); |
| 456 | void __iomem *ioaddr = np->base + ASICCtrl; |
| 457 | int countdown; |
| 458 | |
| 459 | /* ST201 documentation states ASICCtrl is a 32bit register */ |
| 460 | iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr); |
| 461 | /* ST201 documentation states reset can take up to 1 ms */ |
| 462 | countdown = 10 + 1; |
| 463 | while (ioread32 (ioaddr) & (ResetBusy << 16)) { |
| 464 | if (--countdown == 0) { |
| 465 | printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); |
| 466 | break; |
| 467 | } |
| 468 | udelay(100); |
| 469 | } |
| 470 | } |
| 471 | |
| 472 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 473 | static void sundance_poll_controller(struct net_device *dev) |
| 474 | { |
| 475 | struct netdev_private *np = netdev_priv(dev); |
| 476 | |
| 477 | disable_irq(np->pci_dev->irq); |
| 478 | intr_handler(np->pci_dev->irq, dev); |
| 479 | enable_irq(np->pci_dev->irq); |
| 480 | } |
| 481 | #endif |
| 482 | |
| 483 | static const struct net_device_ops netdev_ops = { |
| 484 | .ndo_open = netdev_open, |
| 485 | .ndo_stop = netdev_close, |
| 486 | .ndo_start_xmit = start_tx, |
| 487 | .ndo_get_stats = get_stats, |
| 488 | .ndo_set_rx_mode = set_rx_mode, |
| 489 | .ndo_do_ioctl = netdev_ioctl, |
| 490 | .ndo_tx_timeout = tx_timeout, |
| 491 | .ndo_change_mtu = change_mtu, |
| 492 | .ndo_set_mac_address = sundance_set_mac_addr, |
| 493 | .ndo_validate_addr = eth_validate_addr, |
| 494 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 495 | .ndo_poll_controller = sundance_poll_controller, |
| 496 | #endif |
| 497 | }; |
| 498 | |
| 499 | static int sundance_probe1(struct pci_dev *pdev, |
| 500 | const struct pci_device_id *ent) |
| 501 | { |
| 502 | struct net_device *dev; |
| 503 | struct netdev_private *np; |
| 504 | static int card_idx; |
| 505 | int chip_idx = ent->driver_data; |
| 506 | int irq; |
| 507 | int i; |
| 508 | void __iomem *ioaddr; |
| 509 | u16 mii_ctl; |
| 510 | void *ring_space; |
| 511 | dma_addr_t ring_dma; |
| 512 | #ifdef USE_IO_OPS |
| 513 | int bar = 0; |
| 514 | #else |
| 515 | int bar = 1; |
| 516 | #endif |
| 517 | int phy, phy_end, phy_idx = 0; |
| 518 | |
| 519 | /* when built into the kernel, we only print version if device is found */ |
| 520 | #ifndef MODULE |
| 521 | static int printed_version; |
| 522 | if (!printed_version++) |
| 523 | printk(version); |
| 524 | #endif |
| 525 | |
| 526 | if (pci_enable_device(pdev)) |
| 527 | return -EIO; |
| 528 | pci_set_master(pdev); |
| 529 | |
| 530 | irq = pdev->irq; |
| 531 | |
| 532 | dev = alloc_etherdev(sizeof(*np)); |
| 533 | if (!dev) |
| 534 | return -ENOMEM; |
| 535 | SET_NETDEV_DEV(dev, &pdev->dev); |
| 536 | |
| 537 | if (pci_request_regions(pdev, DRV_NAME)) |
| 538 | goto err_out_netdev; |
| 539 | |
| 540 | ioaddr = pci_iomap(pdev, bar, netdev_io_size); |
| 541 | if (!ioaddr) |
| 542 | goto err_out_res; |
| 543 | |
| 544 | for (i = 0; i < 3; i++) |
| 545 | ((__le16 *)dev->dev_addr)[i] = |
| 546 | cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); |
| 547 | |
| 548 | np = netdev_priv(dev); |
| 549 | np->base = ioaddr; |
| 550 | np->pci_dev = pdev; |
| 551 | np->chip_id = chip_idx; |
| 552 | np->msg_enable = (1 << debug) - 1; |
| 553 | spin_lock_init(&np->lock); |
| 554 | spin_lock_init(&np->statlock); |
| 555 | tasklet_init(&np->rx_tasklet, rx_poll, (unsigned long)dev); |
| 556 | tasklet_init(&np->tx_tasklet, tx_poll, (unsigned long)dev); |
| 557 | |
| 558 | ring_space = dma_alloc_coherent(&pdev->dev, TX_TOTAL_SIZE, |
| 559 | &ring_dma, GFP_KERNEL); |
| 560 | if (!ring_space) |
| 561 | goto err_out_cleardev; |
| 562 | np->tx_ring = (struct netdev_desc *)ring_space; |
| 563 | np->tx_ring_dma = ring_dma; |
| 564 | |
| 565 | ring_space = dma_alloc_coherent(&pdev->dev, RX_TOTAL_SIZE, |
| 566 | &ring_dma, GFP_KERNEL); |
| 567 | if (!ring_space) |
| 568 | goto err_out_unmap_tx; |
| 569 | np->rx_ring = (struct netdev_desc *)ring_space; |
| 570 | np->rx_ring_dma = ring_dma; |
| 571 | |
| 572 | np->mii_if.dev = dev; |
| 573 | np->mii_if.mdio_read = mdio_read; |
| 574 | np->mii_if.mdio_write = mdio_write; |
| 575 | np->mii_if.phy_id_mask = 0x1f; |
| 576 | np->mii_if.reg_num_mask = 0x1f; |
| 577 | |
| 578 | /* The chip-specific entries in the device structure. */ |
| 579 | dev->netdev_ops = &netdev_ops; |
| 580 | dev->ethtool_ops = ðtool_ops; |
| 581 | dev->watchdog_timeo = TX_TIMEOUT; |
| 582 | |
| 583 | pci_set_drvdata(pdev, dev); |
| 584 | |
| 585 | i = register_netdev(dev); |
| 586 | if (i) |
| 587 | goto err_out_unmap_rx; |
| 588 | |
| 589 | printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", |
| 590 | dev->name, pci_id_tbl[chip_idx].name, ioaddr, |
| 591 | dev->dev_addr, irq); |
| 592 | |
| 593 | np->phys[0] = 1; /* Default setting */ |
| 594 | np->mii_preamble_required++; |
| 595 | |
| 596 | /* |
| 597 | * It seems some phys doesn't deal well with address 0 being accessed |
| 598 | * first |
| 599 | */ |
| 600 | if (sundance_pci_tbl[np->chip_id].device == 0x0200) { |
| 601 | phy = 0; |
| 602 | phy_end = 31; |
| 603 | } else { |
| 604 | phy = 1; |
| 605 | phy_end = 32; /* wraps to zero, due to 'phy & 0x1f' */ |
| 606 | } |
| 607 | for (; phy <= phy_end && phy_idx < MII_CNT; phy++) { |
| 608 | int phyx = phy & 0x1f; |
| 609 | int mii_status = mdio_read(dev, phyx, MII_BMSR); |
| 610 | if (mii_status != 0xffff && mii_status != 0x0000) { |
| 611 | np->phys[phy_idx++] = phyx; |
| 612 | np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE); |
| 613 | if ((mii_status & 0x0040) == 0) |
| 614 | np->mii_preamble_required++; |
| 615 | printk(KERN_INFO "%s: MII PHY found at address %d, status " |
| 616 | "0x%4.4x advertising %4.4x.\n", |
| 617 | dev->name, phyx, mii_status, np->mii_if.advertising); |
| 618 | } |
| 619 | } |
| 620 | np->mii_preamble_required--; |
| 621 | |
| 622 | if (phy_idx == 0) { |
| 623 | printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", |
| 624 | dev->name, ioread32(ioaddr + ASICCtrl)); |
| 625 | goto err_out_unregister; |
| 626 | } |
| 627 | |
| 628 | np->mii_if.phy_id = np->phys[0]; |
| 629 | |
| 630 | /* Parse override configuration */ |
| 631 | np->an_enable = 1; |
| 632 | if (card_idx < MAX_UNITS) { |
| 633 | if (media[card_idx] != NULL) { |
| 634 | np->an_enable = 0; |
| 635 | if (strcmp (media[card_idx], "100mbps_fd") == 0 || |
| 636 | strcmp (media[card_idx], "4") == 0) { |
| 637 | np->speed = 100; |
| 638 | np->mii_if.full_duplex = 1; |
| 639 | } else if (strcmp (media[card_idx], "100mbps_hd") == 0 || |
| 640 | strcmp (media[card_idx], "3") == 0) { |
| 641 | np->speed = 100; |
| 642 | np->mii_if.full_duplex = 0; |
| 643 | } else if (strcmp (media[card_idx], "10mbps_fd") == 0 || |
| 644 | strcmp (media[card_idx], "2") == 0) { |
| 645 | np->speed = 10; |
| 646 | np->mii_if.full_duplex = 1; |
| 647 | } else if (strcmp (media[card_idx], "10mbps_hd") == 0 || |
| 648 | strcmp (media[card_idx], "1") == 0) { |
| 649 | np->speed = 10; |
| 650 | np->mii_if.full_duplex = 0; |
| 651 | } else { |
| 652 | np->an_enable = 1; |
| 653 | } |
| 654 | } |
| 655 | if (flowctrl == 1) |
| 656 | np->flowctrl = 1; |
| 657 | } |
| 658 | |
| 659 | /* Fibre PHY? */ |
| 660 | if (ioread32 (ioaddr + ASICCtrl) & 0x80) { |
| 661 | /* Default 100Mbps Full */ |
| 662 | if (np->an_enable) { |
| 663 | np->speed = 100; |
| 664 | np->mii_if.full_duplex = 1; |
| 665 | np->an_enable = 0; |
| 666 | } |
| 667 | } |
| 668 | /* Reset PHY */ |
| 669 | mdio_write (dev, np->phys[0], MII_BMCR, BMCR_RESET); |
| 670 | mdelay (300); |
| 671 | /* If flow control enabled, we need to advertise it.*/ |
| 672 | if (np->flowctrl) |
| 673 | mdio_write (dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising | 0x0400); |
| 674 | mdio_write (dev, np->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART); |
| 675 | /* Force media type */ |
| 676 | if (!np->an_enable) { |
| 677 | mii_ctl = 0; |
| 678 | mii_ctl |= (np->speed == 100) ? BMCR_SPEED100 : 0; |
| 679 | mii_ctl |= (np->mii_if.full_duplex) ? BMCR_FULLDPLX : 0; |
| 680 | mdio_write (dev, np->phys[0], MII_BMCR, mii_ctl); |
| 681 | printk (KERN_INFO "Override speed=%d, %s duplex\n", |
| 682 | np->speed, np->mii_if.full_duplex ? "Full" : "Half"); |
| 683 | |
| 684 | } |
| 685 | |
| 686 | /* Perhaps move the reset here? */ |
| 687 | /* Reset the chip to erase previous misconfiguration. */ |
| 688 | if (netif_msg_hw(np)) |
| 689 | printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); |
| 690 | sundance_reset(dev, 0x00ff << 16); |
| 691 | if (netif_msg_hw(np)) |
| 692 | printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); |
| 693 | |
| 694 | card_idx++; |
| 695 | return 0; |
| 696 | |
| 697 | err_out_unregister: |
| 698 | unregister_netdev(dev); |
| 699 | err_out_unmap_rx: |
| 700 | dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, |
| 701 | np->rx_ring, np->rx_ring_dma); |
| 702 | err_out_unmap_tx: |
| 703 | dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, |
| 704 | np->tx_ring, np->tx_ring_dma); |
| 705 | err_out_cleardev: |
| 706 | pci_iounmap(pdev, ioaddr); |
| 707 | err_out_res: |
| 708 | pci_release_regions(pdev); |
| 709 | err_out_netdev: |
| 710 | free_netdev (dev); |
| 711 | return -ENODEV; |
| 712 | } |
| 713 | |
| 714 | static int change_mtu(struct net_device *dev, int new_mtu) |
| 715 | { |
| 716 | if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */ |
| 717 | return -EINVAL; |
| 718 | if (netif_running(dev)) |
| 719 | return -EBUSY; |
| 720 | dev->mtu = new_mtu; |
| 721 | return 0; |
| 722 | } |
| 723 | |
| 724 | #define eeprom_delay(ee_addr) ioread32(ee_addr) |
| 725 | /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. */ |
| 726 | static int eeprom_read(void __iomem *ioaddr, int location) |
| 727 | { |
| 728 | int boguscnt = 10000; /* Typical 1900 ticks. */ |
| 729 | iowrite16(0x0200 | (location & 0xff), ioaddr + EECtrl); |
| 730 | do { |
| 731 | eeprom_delay(ioaddr + EECtrl); |
| 732 | if (! (ioread16(ioaddr + EECtrl) & 0x8000)) { |
| 733 | return ioread16(ioaddr + EEData); |
| 734 | } |
| 735 | } while (--boguscnt > 0); |
| 736 | return 0; |
| 737 | } |
| 738 | |
| 739 | /* MII transceiver control section. |
| 740 | Read and write the MII registers using software-generated serial |
| 741 | MDIO protocol. See the MII specifications or DP83840A data sheet |
| 742 | for details. |
| 743 | |
| 744 | The maximum data clock rate is 2.5 Mhz. The minimum timing is usually |
| 745 | met by back-to-back 33Mhz PCI cycles. */ |
| 746 | #define mdio_delay() ioread8(mdio_addr) |
| 747 | |
| 748 | enum mii_reg_bits { |
| 749 | MDIO_ShiftClk=0x0001, MDIO_Data=0x0002, MDIO_EnbOutput=0x0004, |
| 750 | }; |
| 751 | #define MDIO_EnbIn (0) |
| 752 | #define MDIO_WRITE0 (MDIO_EnbOutput) |
| 753 | #define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput) |
| 754 | |
| 755 | /* Generate the preamble required for initial synchronization and |
| 756 | a few older transceivers. */ |
| 757 | static void mdio_sync(void __iomem *mdio_addr) |
| 758 | { |
| 759 | int bits = 32; |
| 760 | |
| 761 | /* Establish sync by sending at least 32 logic ones. */ |
| 762 | while (--bits >= 0) { |
| 763 | iowrite8(MDIO_WRITE1, mdio_addr); |
| 764 | mdio_delay(); |
| 765 | iowrite8(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); |
| 766 | mdio_delay(); |
| 767 | } |
| 768 | } |
| 769 | |
| 770 | static int mdio_read(struct net_device *dev, int phy_id, int location) |
| 771 | { |
| 772 | struct netdev_private *np = netdev_priv(dev); |
| 773 | void __iomem *mdio_addr = np->base + MIICtrl; |
| 774 | int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; |
| 775 | int i, retval = 0; |
| 776 | |
| 777 | if (np->mii_preamble_required) |
| 778 | mdio_sync(mdio_addr); |
| 779 | |
| 780 | /* Shift the read command bits out. */ |
| 781 | for (i = 15; i >= 0; i--) { |
| 782 | int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; |
| 783 | |
| 784 | iowrite8(dataval, mdio_addr); |
| 785 | mdio_delay(); |
| 786 | iowrite8(dataval | MDIO_ShiftClk, mdio_addr); |
| 787 | mdio_delay(); |
| 788 | } |
| 789 | /* Read the two transition, 16 data, and wire-idle bits. */ |
| 790 | for (i = 19; i > 0; i--) { |
| 791 | iowrite8(MDIO_EnbIn, mdio_addr); |
| 792 | mdio_delay(); |
| 793 | retval = (retval << 1) | ((ioread8(mdio_addr) & MDIO_Data) ? 1 : 0); |
| 794 | iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); |
| 795 | mdio_delay(); |
| 796 | } |
| 797 | return (retval>>1) & 0xffff; |
| 798 | } |
| 799 | |
| 800 | static void mdio_write(struct net_device *dev, int phy_id, int location, int value) |
| 801 | { |
| 802 | struct netdev_private *np = netdev_priv(dev); |
| 803 | void __iomem *mdio_addr = np->base + MIICtrl; |
| 804 | int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; |
| 805 | int i; |
| 806 | |
| 807 | if (np->mii_preamble_required) |
| 808 | mdio_sync(mdio_addr); |
| 809 | |
| 810 | /* Shift the command bits out. */ |
| 811 | for (i = 31; i >= 0; i--) { |
| 812 | int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; |
| 813 | |
| 814 | iowrite8(dataval, mdio_addr); |
| 815 | mdio_delay(); |
| 816 | iowrite8(dataval | MDIO_ShiftClk, mdio_addr); |
| 817 | mdio_delay(); |
| 818 | } |
| 819 | /* Clear out extra bits. */ |
| 820 | for (i = 2; i > 0; i--) { |
| 821 | iowrite8(MDIO_EnbIn, mdio_addr); |
| 822 | mdio_delay(); |
| 823 | iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); |
| 824 | mdio_delay(); |
| 825 | } |
| 826 | } |
| 827 | |
| 828 | static int mdio_wait_link(struct net_device *dev, int wait) |
| 829 | { |
| 830 | int bmsr; |
| 831 | int phy_id; |
| 832 | struct netdev_private *np; |
| 833 | |
| 834 | np = netdev_priv(dev); |
| 835 | phy_id = np->phys[0]; |
| 836 | |
| 837 | do { |
| 838 | bmsr = mdio_read(dev, phy_id, MII_BMSR); |
| 839 | if (bmsr & 0x0004) |
| 840 | return 0; |
| 841 | mdelay(1); |
| 842 | } while (--wait > 0); |
| 843 | return -1; |
| 844 | } |
| 845 | |
| 846 | static int netdev_open(struct net_device *dev) |
| 847 | { |
| 848 | struct netdev_private *np = netdev_priv(dev); |
| 849 | void __iomem *ioaddr = np->base; |
| 850 | const int irq = np->pci_dev->irq; |
| 851 | unsigned long flags; |
| 852 | int i; |
| 853 | |
| 854 | sundance_reset(dev, 0x00ff << 16); |
| 855 | |
| 856 | i = request_irq(irq, intr_handler, IRQF_SHARED, dev->name, dev); |
| 857 | if (i) |
| 858 | return i; |
| 859 | |
| 860 | if (netif_msg_ifup(np)) |
| 861 | printk(KERN_DEBUG "%s: netdev_open() irq %d\n", dev->name, irq); |
| 862 | |
| 863 | init_ring(dev); |
| 864 | |
| 865 | iowrite32(np->rx_ring_dma, ioaddr + RxListPtr); |
| 866 | /* The Tx list pointer is written as packets are queued. */ |
| 867 | |
| 868 | /* Initialize other registers. */ |
| 869 | __set_mac_addr(dev); |
| 870 | #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) |
| 871 | iowrite16(dev->mtu + 18, ioaddr + MaxFrameSize); |
| 872 | #else |
| 873 | iowrite16(dev->mtu + 14, ioaddr + MaxFrameSize); |
| 874 | #endif |
| 875 | if (dev->mtu > 2047) |
| 876 | iowrite32(ioread32(ioaddr + ASICCtrl) | 0x0C, ioaddr + ASICCtrl); |
| 877 | |
| 878 | /* Configure the PCI bus bursts and FIFO thresholds. */ |
| 879 | |
| 880 | if (dev->if_port == 0) |
| 881 | dev->if_port = np->default_port; |
| 882 | |
| 883 | spin_lock_init(&np->mcastlock); |
| 884 | |
| 885 | set_rx_mode(dev); |
| 886 | iowrite16(0, ioaddr + IntrEnable); |
| 887 | iowrite16(0, ioaddr + DownCounter); |
| 888 | /* Set the chip to poll every N*320nsec. */ |
| 889 | iowrite8(100, ioaddr + RxDMAPollPeriod); |
| 890 | iowrite8(127, ioaddr + TxDMAPollPeriod); |
| 891 | /* Fix DFE-580TX packet drop issue */ |
| 892 | if (np->pci_dev->revision >= 0x14) |
| 893 | iowrite8(0x01, ioaddr + DebugCtrl1); |
| 894 | netif_start_queue(dev); |
| 895 | |
| 896 | spin_lock_irqsave(&np->lock, flags); |
| 897 | reset_tx(dev); |
| 898 | spin_unlock_irqrestore(&np->lock, flags); |
| 899 | |
| 900 | iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); |
| 901 | |
| 902 | /* Disable Wol */ |
| 903 | iowrite8(ioread8(ioaddr + WakeEvent) | 0x00, ioaddr + WakeEvent); |
| 904 | np->wol_enabled = 0; |
| 905 | |
| 906 | if (netif_msg_ifup(np)) |
| 907 | printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x " |
| 908 | "MAC Control %x, %4.4x %4.4x.\n", |
| 909 | dev->name, ioread32(ioaddr + RxStatus), ioread8(ioaddr + TxStatus), |
| 910 | ioread32(ioaddr + MACCtrl0), |
| 911 | ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0)); |
| 912 | |
| 913 | /* Set the timer to check for link beat. */ |
| 914 | init_timer(&np->timer); |
| 915 | np->timer.expires = jiffies + 3*HZ; |
| 916 | np->timer.data = (unsigned long)dev; |
| 917 | np->timer.function = netdev_timer; /* timer handler */ |
| 918 | add_timer(&np->timer); |
| 919 | |
| 920 | /* Enable interrupts by setting the interrupt mask. */ |
| 921 | iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); |
| 922 | |
| 923 | return 0; |
| 924 | } |
| 925 | |
| 926 | static void check_duplex(struct net_device *dev) |
| 927 | { |
| 928 | struct netdev_private *np = netdev_priv(dev); |
| 929 | void __iomem *ioaddr = np->base; |
| 930 | int mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); |
| 931 | int negotiated = mii_lpa & np->mii_if.advertising; |
| 932 | int duplex; |
| 933 | |
| 934 | /* Force media */ |
| 935 | if (!np->an_enable || mii_lpa == 0xffff) { |
| 936 | if (np->mii_if.full_duplex) |
| 937 | iowrite16 (ioread16 (ioaddr + MACCtrl0) | EnbFullDuplex, |
| 938 | ioaddr + MACCtrl0); |
| 939 | return; |
| 940 | } |
| 941 | |
| 942 | /* Autonegotiation */ |
| 943 | duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040; |
| 944 | if (np->mii_if.full_duplex != duplex) { |
| 945 | np->mii_if.full_duplex = duplex; |
| 946 | if (netif_msg_link(np)) |
| 947 | printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " |
| 948 | "negotiated capability %4.4x.\n", dev->name, |
| 949 | duplex ? "full" : "half", np->phys[0], negotiated); |
| 950 | iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0); |
| 951 | } |
| 952 | } |
| 953 | |
| 954 | static void netdev_timer(unsigned long data) |
| 955 | { |
| 956 | struct net_device *dev = (struct net_device *)data; |
| 957 | struct netdev_private *np = netdev_priv(dev); |
| 958 | void __iomem *ioaddr = np->base; |
| 959 | int next_tick = 10*HZ; |
| 960 | |
| 961 | if (netif_msg_timer(np)) { |
| 962 | printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, " |
| 963 | "Tx %x Rx %x.\n", |
| 964 | dev->name, ioread16(ioaddr + IntrEnable), |
| 965 | ioread8(ioaddr + TxStatus), ioread32(ioaddr + RxStatus)); |
| 966 | } |
| 967 | check_duplex(dev); |
| 968 | np->timer.expires = jiffies + next_tick; |
| 969 | add_timer(&np->timer); |
| 970 | } |
| 971 | |
| 972 | static void tx_timeout(struct net_device *dev) |
| 973 | { |
| 974 | struct netdev_private *np = netdev_priv(dev); |
| 975 | void __iomem *ioaddr = np->base; |
| 976 | unsigned long flag; |
| 977 | |
| 978 | netif_stop_queue(dev); |
| 979 | tasklet_disable(&np->tx_tasklet); |
| 980 | iowrite16(0, ioaddr + IntrEnable); |
| 981 | printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x " |
| 982 | "TxFrameId %2.2x," |
| 983 | " resetting...\n", dev->name, ioread8(ioaddr + TxStatus), |
| 984 | ioread8(ioaddr + TxFrameId)); |
| 985 | |
| 986 | { |
| 987 | int i; |
| 988 | for (i=0; i<TX_RING_SIZE; i++) { |
| 989 | printk(KERN_DEBUG "%02x %08llx %08x %08x(%02x) %08x %08x\n", i, |
| 990 | (unsigned long long)(np->tx_ring_dma + i*sizeof(*np->tx_ring)), |
| 991 | le32_to_cpu(np->tx_ring[i].next_desc), |
| 992 | le32_to_cpu(np->tx_ring[i].status), |
| 993 | (le32_to_cpu(np->tx_ring[i].status) >> 2) & 0xff, |
| 994 | le32_to_cpu(np->tx_ring[i].frag[0].addr), |
| 995 | le32_to_cpu(np->tx_ring[i].frag[0].length)); |
| 996 | } |
| 997 | printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n", |
| 998 | ioread32(np->base + TxListPtr), |
| 999 | netif_queue_stopped(dev)); |
| 1000 | printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n", |
| 1001 | np->cur_tx, np->cur_tx % TX_RING_SIZE, |
| 1002 | np->dirty_tx, np->dirty_tx % TX_RING_SIZE); |
| 1003 | printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx); |
| 1004 | printk(KERN_DEBUG "cur_task=%d\n", np->cur_task); |
| 1005 | } |
| 1006 | spin_lock_irqsave(&np->lock, flag); |
| 1007 | |
| 1008 | /* Stop and restart the chip's Tx processes . */ |
| 1009 | reset_tx(dev); |
| 1010 | spin_unlock_irqrestore(&np->lock, flag); |
| 1011 | |
| 1012 | dev->if_port = 0; |
| 1013 | |
| 1014 | dev->trans_start = jiffies; /* prevent tx timeout */ |
| 1015 | dev->stats.tx_errors++; |
| 1016 | if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { |
| 1017 | netif_wake_queue(dev); |
| 1018 | } |
| 1019 | iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); |
| 1020 | tasklet_enable(&np->tx_tasklet); |
| 1021 | } |
| 1022 | |
| 1023 | |
| 1024 | /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ |
| 1025 | static void init_ring(struct net_device *dev) |
| 1026 | { |
| 1027 | struct netdev_private *np = netdev_priv(dev); |
| 1028 | int i; |
| 1029 | |
| 1030 | np->cur_rx = np->cur_tx = 0; |
| 1031 | np->dirty_rx = np->dirty_tx = 0; |
| 1032 | np->cur_task = 0; |
| 1033 | |
| 1034 | np->rx_buf_sz = (dev->mtu <= 1520 ? PKT_BUF_SZ : dev->mtu + 16); |
| 1035 | |
| 1036 | /* Initialize all Rx descriptors. */ |
| 1037 | for (i = 0; i < RX_RING_SIZE; i++) { |
| 1038 | np->rx_ring[i].next_desc = cpu_to_le32(np->rx_ring_dma + |
| 1039 | ((i+1)%RX_RING_SIZE)*sizeof(*np->rx_ring)); |
| 1040 | np->rx_ring[i].status = 0; |
| 1041 | np->rx_ring[i].frag[0].length = 0; |
| 1042 | np->rx_skbuff[i] = NULL; |
| 1043 | } |
| 1044 | |
| 1045 | /* Fill in the Rx buffers. Handle allocation failure gracefully. */ |
| 1046 | for (i = 0; i < RX_RING_SIZE; i++) { |
| 1047 | struct sk_buff *skb = |
| 1048 | netdev_alloc_skb(dev, np->rx_buf_sz + 2); |
| 1049 | np->rx_skbuff[i] = skb; |
| 1050 | if (skb == NULL) |
| 1051 | break; |
| 1052 | skb_reserve(skb, 2); /* 16 byte align the IP header. */ |
| 1053 | np->rx_ring[i].frag[0].addr = cpu_to_le32( |
| 1054 | dma_map_single(&np->pci_dev->dev, skb->data, |
| 1055 | np->rx_buf_sz, DMA_FROM_DEVICE)); |
| 1056 | if (dma_mapping_error(&np->pci_dev->dev, |
| 1057 | np->rx_ring[i].frag[0].addr)) { |
| 1058 | dev_kfree_skb(skb); |
| 1059 | np->rx_skbuff[i] = NULL; |
| 1060 | break; |
| 1061 | } |
| 1062 | np->rx_ring[i].frag[0].length = cpu_to_le32(np->rx_buf_sz | LastFrag); |
| 1063 | } |
| 1064 | np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); |
| 1065 | |
| 1066 | for (i = 0; i < TX_RING_SIZE; i++) { |
| 1067 | np->tx_skbuff[i] = NULL; |
| 1068 | np->tx_ring[i].status = 0; |
| 1069 | } |
| 1070 | } |
| 1071 | |
| 1072 | static void tx_poll (unsigned long data) |
| 1073 | { |
| 1074 | struct net_device *dev = (struct net_device *)data; |
| 1075 | struct netdev_private *np = netdev_priv(dev); |
| 1076 | unsigned head = np->cur_task % TX_RING_SIZE; |
| 1077 | struct netdev_desc *txdesc = |
| 1078 | &np->tx_ring[(np->cur_tx - 1) % TX_RING_SIZE]; |
| 1079 | |
| 1080 | /* Chain the next pointer */ |
| 1081 | for (; np->cur_tx - np->cur_task > 0; np->cur_task++) { |
| 1082 | int entry = np->cur_task % TX_RING_SIZE; |
| 1083 | txdesc = &np->tx_ring[entry]; |
| 1084 | if (np->last_tx) { |
| 1085 | np->last_tx->next_desc = cpu_to_le32(np->tx_ring_dma + |
| 1086 | entry*sizeof(struct netdev_desc)); |
| 1087 | } |
| 1088 | np->last_tx = txdesc; |
| 1089 | } |
| 1090 | /* Indicate the latest descriptor of tx ring */ |
| 1091 | txdesc->status |= cpu_to_le32(DescIntrOnTx); |
| 1092 | |
| 1093 | if (ioread32 (np->base + TxListPtr) == 0) |
| 1094 | iowrite32 (np->tx_ring_dma + head * sizeof(struct netdev_desc), |
| 1095 | np->base + TxListPtr); |
| 1096 | } |
| 1097 | |
| 1098 | static netdev_tx_t |
| 1099 | start_tx (struct sk_buff *skb, struct net_device *dev) |
| 1100 | { |
| 1101 | struct netdev_private *np = netdev_priv(dev); |
| 1102 | struct netdev_desc *txdesc; |
| 1103 | unsigned entry; |
| 1104 | |
| 1105 | /* Calculate the next Tx descriptor entry. */ |
| 1106 | entry = np->cur_tx % TX_RING_SIZE; |
| 1107 | np->tx_skbuff[entry] = skb; |
| 1108 | txdesc = &np->tx_ring[entry]; |
| 1109 | |
| 1110 | txdesc->next_desc = 0; |
| 1111 | txdesc->status = cpu_to_le32 ((entry << 2) | DisableAlign); |
| 1112 | txdesc->frag[0].addr = cpu_to_le32(dma_map_single(&np->pci_dev->dev, |
| 1113 | skb->data, skb->len, DMA_TO_DEVICE)); |
| 1114 | if (dma_mapping_error(&np->pci_dev->dev, |
| 1115 | txdesc->frag[0].addr)) |
| 1116 | goto drop_frame; |
| 1117 | txdesc->frag[0].length = cpu_to_le32 (skb->len | LastFrag); |
| 1118 | |
| 1119 | /* Increment cur_tx before tasklet_schedule() */ |
| 1120 | np->cur_tx++; |
| 1121 | mb(); |
| 1122 | /* Schedule a tx_poll() task */ |
| 1123 | tasklet_schedule(&np->tx_tasklet); |
| 1124 | |
| 1125 | /* On some architectures: explicitly flush cache lines here. */ |
| 1126 | if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1 && |
| 1127 | !netif_queue_stopped(dev)) { |
| 1128 | /* do nothing */ |
| 1129 | } else { |
| 1130 | netif_stop_queue (dev); |
| 1131 | } |
| 1132 | if (netif_msg_tx_queued(np)) { |
| 1133 | printk (KERN_DEBUG |
| 1134 | "%s: Transmit frame #%d queued in slot %d.\n", |
| 1135 | dev->name, np->cur_tx, entry); |
| 1136 | } |
| 1137 | return NETDEV_TX_OK; |
| 1138 | |
| 1139 | drop_frame: |
| 1140 | dev_kfree_skb_any(skb); |
| 1141 | np->tx_skbuff[entry] = NULL; |
| 1142 | dev->stats.tx_dropped++; |
| 1143 | return NETDEV_TX_OK; |
| 1144 | } |
| 1145 | |
| 1146 | /* Reset hardware tx and free all of tx buffers */ |
| 1147 | static int |
| 1148 | reset_tx (struct net_device *dev) |
| 1149 | { |
| 1150 | struct netdev_private *np = netdev_priv(dev); |
| 1151 | void __iomem *ioaddr = np->base; |
| 1152 | struct sk_buff *skb; |
| 1153 | int i; |
| 1154 | |
| 1155 | /* Reset tx logic, TxListPtr will be cleaned */ |
| 1156 | iowrite16 (TxDisable, ioaddr + MACCtrl1); |
| 1157 | sundance_reset(dev, (NetworkReset|FIFOReset|DMAReset|TxReset) << 16); |
| 1158 | |
| 1159 | /* free all tx skbuff */ |
| 1160 | for (i = 0; i < TX_RING_SIZE; i++) { |
| 1161 | np->tx_ring[i].next_desc = 0; |
| 1162 | |
| 1163 | skb = np->tx_skbuff[i]; |
| 1164 | if (skb) { |
| 1165 | dma_unmap_single(&np->pci_dev->dev, |
| 1166 | le32_to_cpu(np->tx_ring[i].frag[0].addr), |
| 1167 | skb->len, DMA_TO_DEVICE); |
| 1168 | dev_kfree_skb_any(skb); |
| 1169 | np->tx_skbuff[i] = NULL; |
| 1170 | dev->stats.tx_dropped++; |
| 1171 | } |
| 1172 | } |
| 1173 | np->cur_tx = np->dirty_tx = 0; |
| 1174 | np->cur_task = 0; |
| 1175 | |
| 1176 | np->last_tx = NULL; |
| 1177 | iowrite8(127, ioaddr + TxDMAPollPeriod); |
| 1178 | |
| 1179 | iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); |
| 1180 | return 0; |
| 1181 | } |
| 1182 | |
| 1183 | /* The interrupt handler cleans up after the Tx thread, |
| 1184 | and schedule a Rx thread work */ |
| 1185 | static irqreturn_t intr_handler(int irq, void *dev_instance) |
| 1186 | { |
| 1187 | struct net_device *dev = (struct net_device *)dev_instance; |
| 1188 | struct netdev_private *np = netdev_priv(dev); |
| 1189 | void __iomem *ioaddr = np->base; |
| 1190 | int hw_frame_id; |
| 1191 | int tx_cnt; |
| 1192 | int tx_status; |
| 1193 | int handled = 0; |
| 1194 | int i; |
| 1195 | |
| 1196 | |
| 1197 | do { |
| 1198 | int intr_status = ioread16(ioaddr + IntrStatus); |
| 1199 | iowrite16(intr_status, ioaddr + IntrStatus); |
| 1200 | |
| 1201 | if (netif_msg_intr(np)) |
| 1202 | printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", |
| 1203 | dev->name, intr_status); |
| 1204 | |
| 1205 | if (!(intr_status & DEFAULT_INTR)) |
| 1206 | break; |
| 1207 | |
| 1208 | handled = 1; |
| 1209 | |
| 1210 | if (intr_status & (IntrRxDMADone)) { |
| 1211 | iowrite16(DEFAULT_INTR & ~(IntrRxDone|IntrRxDMADone), |
| 1212 | ioaddr + IntrEnable); |
| 1213 | if (np->budget < 0) |
| 1214 | np->budget = RX_BUDGET; |
| 1215 | tasklet_schedule(&np->rx_tasklet); |
| 1216 | } |
| 1217 | if (intr_status & (IntrTxDone | IntrDrvRqst)) { |
| 1218 | tx_status = ioread16 (ioaddr + TxStatus); |
| 1219 | for (tx_cnt=32; tx_status & 0x80; --tx_cnt) { |
| 1220 | if (netif_msg_tx_done(np)) |
| 1221 | printk |
| 1222 | ("%s: Transmit status is %2.2x.\n", |
| 1223 | dev->name, tx_status); |
| 1224 | if (tx_status & 0x1e) { |
| 1225 | if (netif_msg_tx_err(np)) |
| 1226 | printk("%s: Transmit error status %4.4x.\n", |
| 1227 | dev->name, tx_status); |
| 1228 | dev->stats.tx_errors++; |
| 1229 | if (tx_status & 0x10) |
| 1230 | dev->stats.tx_fifo_errors++; |
| 1231 | if (tx_status & 0x08) |
| 1232 | dev->stats.collisions++; |
| 1233 | if (tx_status & 0x04) |
| 1234 | dev->stats.tx_fifo_errors++; |
| 1235 | if (tx_status & 0x02) |
| 1236 | dev->stats.tx_window_errors++; |
| 1237 | |
| 1238 | /* |
| 1239 | ** This reset has been verified on |
| 1240 | ** DFE-580TX boards ! phdm@macqel.be. |
| 1241 | */ |
| 1242 | if (tx_status & 0x10) { /* TxUnderrun */ |
| 1243 | /* Restart Tx FIFO and transmitter */ |
| 1244 | sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); |
| 1245 | /* No need to reset the Tx pointer here */ |
| 1246 | } |
| 1247 | /* Restart the Tx. Need to make sure tx enabled */ |
| 1248 | i = 10; |
| 1249 | do { |
| 1250 | iowrite16(ioread16(ioaddr + MACCtrl1) | TxEnable, ioaddr + MACCtrl1); |
| 1251 | if (ioread16(ioaddr + MACCtrl1) & TxEnabled) |
| 1252 | break; |
| 1253 | mdelay(1); |
| 1254 | } while (--i); |
| 1255 | } |
| 1256 | /* Yup, this is a documentation bug. It cost me *hours*. */ |
| 1257 | iowrite16 (0, ioaddr + TxStatus); |
| 1258 | if (tx_cnt < 0) { |
| 1259 | iowrite32(5000, ioaddr + DownCounter); |
| 1260 | break; |
| 1261 | } |
| 1262 | tx_status = ioread16 (ioaddr + TxStatus); |
| 1263 | } |
| 1264 | hw_frame_id = (tx_status >> 8) & 0xff; |
| 1265 | } else { |
| 1266 | hw_frame_id = ioread8(ioaddr + TxFrameId); |
| 1267 | } |
| 1268 | |
| 1269 | if (np->pci_dev->revision >= 0x14) { |
| 1270 | spin_lock(&np->lock); |
| 1271 | for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { |
| 1272 | int entry = np->dirty_tx % TX_RING_SIZE; |
| 1273 | struct sk_buff *skb; |
| 1274 | int sw_frame_id; |
| 1275 | sw_frame_id = (le32_to_cpu( |
| 1276 | np->tx_ring[entry].status) >> 2) & 0xff; |
| 1277 | if (sw_frame_id == hw_frame_id && |
| 1278 | !(le32_to_cpu(np->tx_ring[entry].status) |
| 1279 | & 0x00010000)) |
| 1280 | break; |
| 1281 | if (sw_frame_id == (hw_frame_id + 1) % |
| 1282 | TX_RING_SIZE) |
| 1283 | break; |
| 1284 | skb = np->tx_skbuff[entry]; |
| 1285 | /* Free the original skb. */ |
| 1286 | dma_unmap_single(&np->pci_dev->dev, |
| 1287 | le32_to_cpu(np->tx_ring[entry].frag[0].addr), |
| 1288 | skb->len, DMA_TO_DEVICE); |
| 1289 | dev_kfree_skb_irq (np->tx_skbuff[entry]); |
| 1290 | np->tx_skbuff[entry] = NULL; |
| 1291 | np->tx_ring[entry].frag[0].addr = 0; |
| 1292 | np->tx_ring[entry].frag[0].length = 0; |
| 1293 | } |
| 1294 | spin_unlock(&np->lock); |
| 1295 | } else { |
| 1296 | spin_lock(&np->lock); |
| 1297 | for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { |
| 1298 | int entry = np->dirty_tx % TX_RING_SIZE; |
| 1299 | struct sk_buff *skb; |
| 1300 | if (!(le32_to_cpu(np->tx_ring[entry].status) |
| 1301 | & 0x00010000)) |
| 1302 | break; |
| 1303 | skb = np->tx_skbuff[entry]; |
| 1304 | /* Free the original skb. */ |
| 1305 | dma_unmap_single(&np->pci_dev->dev, |
| 1306 | le32_to_cpu(np->tx_ring[entry].frag[0].addr), |
| 1307 | skb->len, DMA_TO_DEVICE); |
| 1308 | dev_kfree_skb_irq (np->tx_skbuff[entry]); |
| 1309 | np->tx_skbuff[entry] = NULL; |
| 1310 | np->tx_ring[entry].frag[0].addr = 0; |
| 1311 | np->tx_ring[entry].frag[0].length = 0; |
| 1312 | } |
| 1313 | spin_unlock(&np->lock); |
| 1314 | } |
| 1315 | |
| 1316 | if (netif_queue_stopped(dev) && |
| 1317 | np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { |
| 1318 | /* The ring is no longer full, clear busy flag. */ |
| 1319 | netif_wake_queue (dev); |
| 1320 | } |
| 1321 | /* Abnormal error summary/uncommon events handlers. */ |
| 1322 | if (intr_status & (IntrPCIErr | LinkChange | StatsMax)) |
| 1323 | netdev_error(dev, intr_status); |
| 1324 | } while (0); |
| 1325 | if (netif_msg_intr(np)) |
| 1326 | printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", |
| 1327 | dev->name, ioread16(ioaddr + IntrStatus)); |
| 1328 | return IRQ_RETVAL(handled); |
| 1329 | } |
| 1330 | |
| 1331 | static void rx_poll(unsigned long data) |
| 1332 | { |
| 1333 | struct net_device *dev = (struct net_device *)data; |
| 1334 | struct netdev_private *np = netdev_priv(dev); |
| 1335 | int entry = np->cur_rx % RX_RING_SIZE; |
| 1336 | int boguscnt = np->budget; |
| 1337 | void __iomem *ioaddr = np->base; |
| 1338 | int received = 0; |
| 1339 | |
| 1340 | /* If EOP is set on the next entry, it's a new packet. Send it up. */ |
| 1341 | while (1) { |
| 1342 | struct netdev_desc *desc = &(np->rx_ring[entry]); |
| 1343 | u32 frame_status = le32_to_cpu(desc->status); |
| 1344 | int pkt_len; |
| 1345 | |
| 1346 | if (--boguscnt < 0) { |
| 1347 | goto not_done; |
| 1348 | } |
| 1349 | if (!(frame_status & DescOwn)) |
| 1350 | break; |
| 1351 | pkt_len = frame_status & 0x1fff; /* Chip omits the CRC. */ |
| 1352 | if (netif_msg_rx_status(np)) |
| 1353 | printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", |
| 1354 | frame_status); |
| 1355 | if (frame_status & 0x001f4000) { |
| 1356 | /* There was a error. */ |
| 1357 | if (netif_msg_rx_err(np)) |
| 1358 | printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n", |
| 1359 | frame_status); |
| 1360 | dev->stats.rx_errors++; |
| 1361 | if (frame_status & 0x00100000) |
| 1362 | dev->stats.rx_length_errors++; |
| 1363 | if (frame_status & 0x00010000) |
| 1364 | dev->stats.rx_fifo_errors++; |
| 1365 | if (frame_status & 0x00060000) |
| 1366 | dev->stats.rx_frame_errors++; |
| 1367 | if (frame_status & 0x00080000) |
| 1368 | dev->stats.rx_crc_errors++; |
| 1369 | if (frame_status & 0x00100000) { |
| 1370 | printk(KERN_WARNING "%s: Oversized Ethernet frame," |
| 1371 | " status %8.8x.\n", |
| 1372 | dev->name, frame_status); |
| 1373 | } |
| 1374 | } else { |
| 1375 | struct sk_buff *skb; |
| 1376 | #ifndef final_version |
| 1377 | if (netif_msg_rx_status(np)) |
| 1378 | printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" |
| 1379 | ", bogus_cnt %d.\n", |
| 1380 | pkt_len, boguscnt); |
| 1381 | #endif |
| 1382 | /* Check if the packet is long enough to accept without copying |
| 1383 | to a minimally-sized skbuff. */ |
| 1384 | if (pkt_len < rx_copybreak && |
| 1385 | (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) { |
| 1386 | skb_reserve(skb, 2); /* 16 byte align the IP header */ |
| 1387 | dma_sync_single_for_cpu(&np->pci_dev->dev, |
| 1388 | le32_to_cpu(desc->frag[0].addr), |
| 1389 | np->rx_buf_sz, DMA_FROM_DEVICE); |
| 1390 | skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); |
| 1391 | dma_sync_single_for_device(&np->pci_dev->dev, |
| 1392 | le32_to_cpu(desc->frag[0].addr), |
| 1393 | np->rx_buf_sz, DMA_FROM_DEVICE); |
| 1394 | skb_put(skb, pkt_len); |
| 1395 | } else { |
| 1396 | dma_unmap_single(&np->pci_dev->dev, |
| 1397 | le32_to_cpu(desc->frag[0].addr), |
| 1398 | np->rx_buf_sz, DMA_FROM_DEVICE); |
| 1399 | skb_put(skb = np->rx_skbuff[entry], pkt_len); |
| 1400 | np->rx_skbuff[entry] = NULL; |
| 1401 | } |
| 1402 | skb->protocol = eth_type_trans(skb, dev); |
| 1403 | /* Note: checksum -> skb->ip_summed = CHECKSUM_UNNECESSARY; */ |
| 1404 | netif_rx(skb); |
| 1405 | } |
| 1406 | entry = (entry + 1) % RX_RING_SIZE; |
| 1407 | received++; |
| 1408 | } |
| 1409 | np->cur_rx = entry; |
| 1410 | refill_rx (dev); |
| 1411 | np->budget -= received; |
| 1412 | iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); |
| 1413 | return; |
| 1414 | |
| 1415 | not_done: |
| 1416 | np->cur_rx = entry; |
| 1417 | refill_rx (dev); |
| 1418 | if (!received) |
| 1419 | received = 1; |
| 1420 | np->budget -= received; |
| 1421 | if (np->budget <= 0) |
| 1422 | np->budget = RX_BUDGET; |
| 1423 | tasklet_schedule(&np->rx_tasklet); |
| 1424 | } |
| 1425 | |
| 1426 | static void refill_rx (struct net_device *dev) |
| 1427 | { |
| 1428 | struct netdev_private *np = netdev_priv(dev); |
| 1429 | int entry; |
| 1430 | int cnt = 0; |
| 1431 | |
| 1432 | /* Refill the Rx ring buffers. */ |
| 1433 | for (;(np->cur_rx - np->dirty_rx + RX_RING_SIZE) % RX_RING_SIZE > 0; |
| 1434 | np->dirty_rx = (np->dirty_rx + 1) % RX_RING_SIZE) { |
| 1435 | struct sk_buff *skb; |
| 1436 | entry = np->dirty_rx % RX_RING_SIZE; |
| 1437 | if (np->rx_skbuff[entry] == NULL) { |
| 1438 | skb = netdev_alloc_skb(dev, np->rx_buf_sz + 2); |
| 1439 | np->rx_skbuff[entry] = skb; |
| 1440 | if (skb == NULL) |
| 1441 | break; /* Better luck next round. */ |
| 1442 | skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ |
| 1443 | np->rx_ring[entry].frag[0].addr = cpu_to_le32( |
| 1444 | dma_map_single(&np->pci_dev->dev, skb->data, |
| 1445 | np->rx_buf_sz, DMA_FROM_DEVICE)); |
| 1446 | if (dma_mapping_error(&np->pci_dev->dev, |
| 1447 | np->rx_ring[entry].frag[0].addr)) { |
| 1448 | dev_kfree_skb_irq(skb); |
| 1449 | np->rx_skbuff[entry] = NULL; |
| 1450 | break; |
| 1451 | } |
| 1452 | } |
| 1453 | /* Perhaps we need not reset this field. */ |
| 1454 | np->rx_ring[entry].frag[0].length = |
| 1455 | cpu_to_le32(np->rx_buf_sz | LastFrag); |
| 1456 | np->rx_ring[entry].status = 0; |
| 1457 | cnt++; |
| 1458 | } |
| 1459 | } |
| 1460 | static void netdev_error(struct net_device *dev, int intr_status) |
| 1461 | { |
| 1462 | struct netdev_private *np = netdev_priv(dev); |
| 1463 | void __iomem *ioaddr = np->base; |
| 1464 | u16 mii_ctl, mii_advertise, mii_lpa; |
| 1465 | int speed; |
| 1466 | |
| 1467 | if (intr_status & LinkChange) { |
| 1468 | if (mdio_wait_link(dev, 10) == 0) { |
| 1469 | printk(KERN_INFO "%s: Link up\n", dev->name); |
| 1470 | if (np->an_enable) { |
| 1471 | mii_advertise = mdio_read(dev, np->phys[0], |
| 1472 | MII_ADVERTISE); |
| 1473 | mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); |
| 1474 | mii_advertise &= mii_lpa; |
| 1475 | printk(KERN_INFO "%s: Link changed: ", |
| 1476 | dev->name); |
| 1477 | if (mii_advertise & ADVERTISE_100FULL) { |
| 1478 | np->speed = 100; |
| 1479 | printk("100Mbps, full duplex\n"); |
| 1480 | } else if (mii_advertise & ADVERTISE_100HALF) { |
| 1481 | np->speed = 100; |
| 1482 | printk("100Mbps, half duplex\n"); |
| 1483 | } else if (mii_advertise & ADVERTISE_10FULL) { |
| 1484 | np->speed = 10; |
| 1485 | printk("10Mbps, full duplex\n"); |
| 1486 | } else if (mii_advertise & ADVERTISE_10HALF) { |
| 1487 | np->speed = 10; |
| 1488 | printk("10Mbps, half duplex\n"); |
| 1489 | } else |
| 1490 | printk("\n"); |
| 1491 | |
| 1492 | } else { |
| 1493 | mii_ctl = mdio_read(dev, np->phys[0], MII_BMCR); |
| 1494 | speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10; |
| 1495 | np->speed = speed; |
| 1496 | printk(KERN_INFO "%s: Link changed: %dMbps ,", |
| 1497 | dev->name, speed); |
| 1498 | printk("%s duplex.\n", |
| 1499 | (mii_ctl & BMCR_FULLDPLX) ? |
| 1500 | "full" : "half"); |
| 1501 | } |
| 1502 | check_duplex(dev); |
| 1503 | if (np->flowctrl && np->mii_if.full_duplex) { |
| 1504 | iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200, |
| 1505 | ioaddr + MulticastFilter1+2); |
| 1506 | iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl, |
| 1507 | ioaddr + MACCtrl0); |
| 1508 | } |
| 1509 | netif_carrier_on(dev); |
| 1510 | } else { |
| 1511 | printk(KERN_INFO "%s: Link down\n", dev->name); |
| 1512 | netif_carrier_off(dev); |
| 1513 | } |
| 1514 | } |
| 1515 | if (intr_status & StatsMax) { |
| 1516 | get_stats(dev); |
| 1517 | } |
| 1518 | if (intr_status & IntrPCIErr) { |
| 1519 | printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", |
| 1520 | dev->name, intr_status); |
| 1521 | /* We must do a global reset of DMA to continue. */ |
| 1522 | } |
| 1523 | } |
| 1524 | |
| 1525 | static struct net_device_stats *get_stats(struct net_device *dev) |
| 1526 | { |
| 1527 | struct netdev_private *np = netdev_priv(dev); |
| 1528 | void __iomem *ioaddr = np->base; |
| 1529 | unsigned long flags; |
| 1530 | u8 late_coll, single_coll, mult_coll; |
| 1531 | |
| 1532 | spin_lock_irqsave(&np->statlock, flags); |
| 1533 | /* The chip only need report frame silently dropped. */ |
| 1534 | dev->stats.rx_missed_errors += ioread8(ioaddr + RxMissed); |
| 1535 | dev->stats.tx_packets += ioread16(ioaddr + TxFramesOK); |
| 1536 | dev->stats.rx_packets += ioread16(ioaddr + RxFramesOK); |
| 1537 | dev->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError); |
| 1538 | |
| 1539 | mult_coll = ioread8(ioaddr + StatsMultiColl); |
| 1540 | np->xstats.tx_multiple_collisions += mult_coll; |
| 1541 | single_coll = ioread8(ioaddr + StatsOneColl); |
| 1542 | np->xstats.tx_single_collisions += single_coll; |
| 1543 | late_coll = ioread8(ioaddr + StatsLateColl); |
| 1544 | np->xstats.tx_late_collisions += late_coll; |
| 1545 | dev->stats.collisions += mult_coll |
| 1546 | + single_coll |
| 1547 | + late_coll; |
| 1548 | |
| 1549 | np->xstats.tx_deferred += ioread8(ioaddr + StatsTxDefer); |
| 1550 | np->xstats.tx_deferred_excessive += ioread8(ioaddr + StatsTxXSDefer); |
| 1551 | np->xstats.tx_aborted += ioread8(ioaddr + StatsTxAbort); |
| 1552 | np->xstats.tx_bcasts += ioread8(ioaddr + StatsBcastTx); |
| 1553 | np->xstats.rx_bcasts += ioread8(ioaddr + StatsBcastRx); |
| 1554 | np->xstats.tx_mcasts += ioread8(ioaddr + StatsMcastTx); |
| 1555 | np->xstats.rx_mcasts += ioread8(ioaddr + StatsMcastRx); |
| 1556 | |
| 1557 | dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow); |
| 1558 | dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16; |
| 1559 | dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow); |
| 1560 | dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16; |
| 1561 | |
| 1562 | spin_unlock_irqrestore(&np->statlock, flags); |
| 1563 | |
| 1564 | return &dev->stats; |
| 1565 | } |
| 1566 | |
| 1567 | static void set_rx_mode(struct net_device *dev) |
| 1568 | { |
| 1569 | struct netdev_private *np = netdev_priv(dev); |
| 1570 | void __iomem *ioaddr = np->base; |
| 1571 | u16 mc_filter[4]; /* Multicast hash filter */ |
| 1572 | u32 rx_mode; |
| 1573 | int i; |
| 1574 | |
| 1575 | if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ |
| 1576 | memset(mc_filter, 0xff, sizeof(mc_filter)); |
| 1577 | rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys; |
| 1578 | } else if ((netdev_mc_count(dev) > multicast_filter_limit) || |
| 1579 | (dev->flags & IFF_ALLMULTI)) { |
| 1580 | /* Too many to match, or accept all multicasts. */ |
| 1581 | memset(mc_filter, 0xff, sizeof(mc_filter)); |
| 1582 | rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; |
| 1583 | } else if (!netdev_mc_empty(dev)) { |
| 1584 | struct netdev_hw_addr *ha; |
| 1585 | int bit; |
| 1586 | int index; |
| 1587 | int crc; |
| 1588 | memset (mc_filter, 0, sizeof (mc_filter)); |
| 1589 | netdev_for_each_mc_addr(ha, dev) { |
| 1590 | crc = ether_crc_le(ETH_ALEN, ha->addr); |
| 1591 | for (index=0, bit=0; bit < 6; bit++, crc <<= 1) |
| 1592 | if (crc & 0x80000000) index |= 1 << bit; |
| 1593 | mc_filter[index/16] |= (1 << (index % 16)); |
| 1594 | } |
| 1595 | rx_mode = AcceptBroadcast | AcceptMultiHash | AcceptMyPhys; |
| 1596 | } else { |
| 1597 | iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode); |
| 1598 | return; |
| 1599 | } |
| 1600 | if (np->mii_if.full_duplex && np->flowctrl) |
| 1601 | mc_filter[3] |= 0x0200; |
| 1602 | |
| 1603 | for (i = 0; i < 4; i++) |
| 1604 | iowrite16(mc_filter[i], ioaddr + MulticastFilter0 + i*2); |
| 1605 | iowrite8(rx_mode, ioaddr + RxMode); |
| 1606 | } |
| 1607 | |
| 1608 | static int __set_mac_addr(struct net_device *dev) |
| 1609 | { |
| 1610 | struct netdev_private *np = netdev_priv(dev); |
| 1611 | u16 addr16; |
| 1612 | |
| 1613 | addr16 = (dev->dev_addr[0] | (dev->dev_addr[1] << 8)); |
| 1614 | iowrite16(addr16, np->base + StationAddr); |
| 1615 | addr16 = (dev->dev_addr[2] | (dev->dev_addr[3] << 8)); |
| 1616 | iowrite16(addr16, np->base + StationAddr+2); |
| 1617 | addr16 = (dev->dev_addr[4] | (dev->dev_addr[5] << 8)); |
| 1618 | iowrite16(addr16, np->base + StationAddr+4); |
| 1619 | return 0; |
| 1620 | } |
| 1621 | |
| 1622 | /* Invoked with rtnl_lock held */ |
| 1623 | static int sundance_set_mac_addr(struct net_device *dev, void *data) |
| 1624 | { |
| 1625 | const struct sockaddr *addr = data; |
| 1626 | |
| 1627 | if (!is_valid_ether_addr(addr->sa_data)) |
| 1628 | return -EADDRNOTAVAIL; |
| 1629 | memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
| 1630 | __set_mac_addr(dev); |
| 1631 | |
| 1632 | return 0; |
| 1633 | } |
| 1634 | |
| 1635 | static const struct { |
| 1636 | const char name[ETH_GSTRING_LEN]; |
| 1637 | } sundance_stats[] = { |
| 1638 | { "tx_multiple_collisions" }, |
| 1639 | { "tx_single_collisions" }, |
| 1640 | { "tx_late_collisions" }, |
| 1641 | { "tx_deferred" }, |
| 1642 | { "tx_deferred_excessive" }, |
| 1643 | { "tx_aborted" }, |
| 1644 | { "tx_bcasts" }, |
| 1645 | { "rx_bcasts" }, |
| 1646 | { "tx_mcasts" }, |
| 1647 | { "rx_mcasts" }, |
| 1648 | }; |
| 1649 | |
| 1650 | static int check_if_running(struct net_device *dev) |
| 1651 | { |
| 1652 | if (!netif_running(dev)) |
| 1653 | return -EINVAL; |
| 1654 | return 0; |
| 1655 | } |
| 1656 | |
| 1657 | static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| 1658 | { |
| 1659 | struct netdev_private *np = netdev_priv(dev); |
| 1660 | strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| 1661 | strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| 1662 | strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); |
| 1663 | } |
| 1664 | |
| 1665 | static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
| 1666 | { |
| 1667 | struct netdev_private *np = netdev_priv(dev); |
| 1668 | spin_lock_irq(&np->lock); |
| 1669 | mii_ethtool_gset(&np->mii_if, ecmd); |
| 1670 | spin_unlock_irq(&np->lock); |
| 1671 | return 0; |
| 1672 | } |
| 1673 | |
| 1674 | static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) |
| 1675 | { |
| 1676 | struct netdev_private *np = netdev_priv(dev); |
| 1677 | int res; |
| 1678 | spin_lock_irq(&np->lock); |
| 1679 | res = mii_ethtool_sset(&np->mii_if, ecmd); |
| 1680 | spin_unlock_irq(&np->lock); |
| 1681 | return res; |
| 1682 | } |
| 1683 | |
| 1684 | static int nway_reset(struct net_device *dev) |
| 1685 | { |
| 1686 | struct netdev_private *np = netdev_priv(dev); |
| 1687 | return mii_nway_restart(&np->mii_if); |
| 1688 | } |
| 1689 | |
| 1690 | static u32 get_link(struct net_device *dev) |
| 1691 | { |
| 1692 | struct netdev_private *np = netdev_priv(dev); |
| 1693 | return mii_link_ok(&np->mii_if); |
| 1694 | } |
| 1695 | |
| 1696 | static u32 get_msglevel(struct net_device *dev) |
| 1697 | { |
| 1698 | struct netdev_private *np = netdev_priv(dev); |
| 1699 | return np->msg_enable; |
| 1700 | } |
| 1701 | |
| 1702 | static void set_msglevel(struct net_device *dev, u32 val) |
| 1703 | { |
| 1704 | struct netdev_private *np = netdev_priv(dev); |
| 1705 | np->msg_enable = val; |
| 1706 | } |
| 1707 | |
| 1708 | static void get_strings(struct net_device *dev, u32 stringset, |
| 1709 | u8 *data) |
| 1710 | { |
| 1711 | if (stringset == ETH_SS_STATS) |
| 1712 | memcpy(data, sundance_stats, sizeof(sundance_stats)); |
| 1713 | } |
| 1714 | |
| 1715 | static int get_sset_count(struct net_device *dev, int sset) |
| 1716 | { |
| 1717 | switch (sset) { |
| 1718 | case ETH_SS_STATS: |
| 1719 | return ARRAY_SIZE(sundance_stats); |
| 1720 | default: |
| 1721 | return -EOPNOTSUPP; |
| 1722 | } |
| 1723 | } |
| 1724 | |
| 1725 | static void get_ethtool_stats(struct net_device *dev, |
| 1726 | struct ethtool_stats *stats, u64 *data) |
| 1727 | { |
| 1728 | struct netdev_private *np = netdev_priv(dev); |
| 1729 | int i = 0; |
| 1730 | |
| 1731 | get_stats(dev); |
| 1732 | data[i++] = np->xstats.tx_multiple_collisions; |
| 1733 | data[i++] = np->xstats.tx_single_collisions; |
| 1734 | data[i++] = np->xstats.tx_late_collisions; |
| 1735 | data[i++] = np->xstats.tx_deferred; |
| 1736 | data[i++] = np->xstats.tx_deferred_excessive; |
| 1737 | data[i++] = np->xstats.tx_aborted; |
| 1738 | data[i++] = np->xstats.tx_bcasts; |
| 1739 | data[i++] = np->xstats.rx_bcasts; |
| 1740 | data[i++] = np->xstats.tx_mcasts; |
| 1741 | data[i++] = np->xstats.rx_mcasts; |
| 1742 | } |
| 1743 | |
| 1744 | #ifdef CONFIG_PM |
| 1745 | |
| 1746 | static void sundance_get_wol(struct net_device *dev, |
| 1747 | struct ethtool_wolinfo *wol) |
| 1748 | { |
| 1749 | struct netdev_private *np = netdev_priv(dev); |
| 1750 | void __iomem *ioaddr = np->base; |
| 1751 | u8 wol_bits; |
| 1752 | |
| 1753 | wol->wolopts = 0; |
| 1754 | |
| 1755 | wol->supported = (WAKE_PHY | WAKE_MAGIC); |
| 1756 | if (!np->wol_enabled) |
| 1757 | return; |
| 1758 | |
| 1759 | wol_bits = ioread8(ioaddr + WakeEvent); |
| 1760 | if (wol_bits & MagicPktEnable) |
| 1761 | wol->wolopts |= WAKE_MAGIC; |
| 1762 | if (wol_bits & LinkEventEnable) |
| 1763 | wol->wolopts |= WAKE_PHY; |
| 1764 | } |
| 1765 | |
| 1766 | static int sundance_set_wol(struct net_device *dev, |
| 1767 | struct ethtool_wolinfo *wol) |
| 1768 | { |
| 1769 | struct netdev_private *np = netdev_priv(dev); |
| 1770 | void __iomem *ioaddr = np->base; |
| 1771 | u8 wol_bits; |
| 1772 | |
| 1773 | if (!device_can_wakeup(&np->pci_dev->dev)) |
| 1774 | return -EOPNOTSUPP; |
| 1775 | |
| 1776 | np->wol_enabled = !!(wol->wolopts); |
| 1777 | wol_bits = ioread8(ioaddr + WakeEvent); |
| 1778 | wol_bits &= ~(WakePktEnable | MagicPktEnable | |
| 1779 | LinkEventEnable | WolEnable); |
| 1780 | |
| 1781 | if (np->wol_enabled) { |
| 1782 | if (wol->wolopts & WAKE_MAGIC) |
| 1783 | wol_bits |= (MagicPktEnable | WolEnable); |
| 1784 | if (wol->wolopts & WAKE_PHY) |
| 1785 | wol_bits |= (LinkEventEnable | WolEnable); |
| 1786 | } |
| 1787 | iowrite8(wol_bits, ioaddr + WakeEvent); |
| 1788 | |
| 1789 | device_set_wakeup_enable(&np->pci_dev->dev, np->wol_enabled); |
| 1790 | |
| 1791 | return 0; |
| 1792 | } |
| 1793 | #else |
| 1794 | #define sundance_get_wol NULL |
| 1795 | #define sundance_set_wol NULL |
| 1796 | #endif /* CONFIG_PM */ |
| 1797 | |
| 1798 | static const struct ethtool_ops ethtool_ops = { |
| 1799 | .begin = check_if_running, |
| 1800 | .get_drvinfo = get_drvinfo, |
| 1801 | .get_settings = get_settings, |
| 1802 | .set_settings = set_settings, |
| 1803 | .nway_reset = nway_reset, |
| 1804 | .get_link = get_link, |
| 1805 | .get_wol = sundance_get_wol, |
| 1806 | .set_wol = sundance_set_wol, |
| 1807 | .get_msglevel = get_msglevel, |
| 1808 | .set_msglevel = set_msglevel, |
| 1809 | .get_strings = get_strings, |
| 1810 | .get_sset_count = get_sset_count, |
| 1811 | .get_ethtool_stats = get_ethtool_stats, |
| 1812 | }; |
| 1813 | |
| 1814 | static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| 1815 | { |
| 1816 | struct netdev_private *np = netdev_priv(dev); |
| 1817 | int rc; |
| 1818 | |
| 1819 | if (!netif_running(dev)) |
| 1820 | return -EINVAL; |
| 1821 | |
| 1822 | spin_lock_irq(&np->lock); |
| 1823 | rc = generic_mii_ioctl(&np->mii_if, if_mii(rq), cmd, NULL); |
| 1824 | spin_unlock_irq(&np->lock); |
| 1825 | |
| 1826 | return rc; |
| 1827 | } |
| 1828 | |
| 1829 | static int netdev_close(struct net_device *dev) |
| 1830 | { |
| 1831 | struct netdev_private *np = netdev_priv(dev); |
| 1832 | void __iomem *ioaddr = np->base; |
| 1833 | struct sk_buff *skb; |
| 1834 | int i; |
| 1835 | |
| 1836 | /* Wait and kill tasklet */ |
| 1837 | tasklet_kill(&np->rx_tasklet); |
| 1838 | tasklet_kill(&np->tx_tasklet); |
| 1839 | np->cur_tx = 0; |
| 1840 | np->dirty_tx = 0; |
| 1841 | np->cur_task = 0; |
| 1842 | np->last_tx = NULL; |
| 1843 | |
| 1844 | netif_stop_queue(dev); |
| 1845 | |
| 1846 | if (netif_msg_ifdown(np)) { |
| 1847 | printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x " |
| 1848 | "Rx %4.4x Int %2.2x.\n", |
| 1849 | dev->name, ioread8(ioaddr + TxStatus), |
| 1850 | ioread32(ioaddr + RxStatus), ioread16(ioaddr + IntrStatus)); |
| 1851 | printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", |
| 1852 | dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx); |
| 1853 | } |
| 1854 | |
| 1855 | /* Disable interrupts by clearing the interrupt mask. */ |
| 1856 | iowrite16(0x0000, ioaddr + IntrEnable); |
| 1857 | |
| 1858 | /* Disable Rx and Tx DMA for safely release resource */ |
| 1859 | iowrite32(0x500, ioaddr + DMACtrl); |
| 1860 | |
| 1861 | /* Stop the chip's Tx and Rx processes. */ |
| 1862 | iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1); |
| 1863 | |
| 1864 | for (i = 2000; i > 0; i--) { |
| 1865 | if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0) |
| 1866 | break; |
| 1867 | mdelay(1); |
| 1868 | } |
| 1869 | |
| 1870 | iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset, |
| 1871 | ioaddr + ASIC_HI_WORD(ASICCtrl)); |
| 1872 | |
| 1873 | for (i = 2000; i > 0; i--) { |
| 1874 | if ((ioread16(ioaddr + ASIC_HI_WORD(ASICCtrl)) & ResetBusy) == 0) |
| 1875 | break; |
| 1876 | mdelay(1); |
| 1877 | } |
| 1878 | |
| 1879 | #ifdef __i386__ |
| 1880 | if (netif_msg_hw(np)) { |
| 1881 | printk(KERN_DEBUG " Tx ring at %8.8x:\n", |
| 1882 | (int)(np->tx_ring_dma)); |
| 1883 | for (i = 0; i < TX_RING_SIZE; i++) |
| 1884 | printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", |
| 1885 | i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, |
| 1886 | np->tx_ring[i].frag[0].length); |
| 1887 | printk(KERN_DEBUG " Rx ring %8.8x:\n", |
| 1888 | (int)(np->rx_ring_dma)); |
| 1889 | for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { |
| 1890 | printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", |
| 1891 | i, np->rx_ring[i].status, np->rx_ring[i].frag[0].addr, |
| 1892 | np->rx_ring[i].frag[0].length); |
| 1893 | } |
| 1894 | } |
| 1895 | #endif /* __i386__ debugging only */ |
| 1896 | |
| 1897 | free_irq(np->pci_dev->irq, dev); |
| 1898 | |
| 1899 | del_timer_sync(&np->timer); |
| 1900 | |
| 1901 | /* Free all the skbuffs in the Rx queue. */ |
| 1902 | for (i = 0; i < RX_RING_SIZE; i++) { |
| 1903 | np->rx_ring[i].status = 0; |
| 1904 | skb = np->rx_skbuff[i]; |
| 1905 | if (skb) { |
| 1906 | dma_unmap_single(&np->pci_dev->dev, |
| 1907 | le32_to_cpu(np->rx_ring[i].frag[0].addr), |
| 1908 | np->rx_buf_sz, DMA_FROM_DEVICE); |
| 1909 | dev_kfree_skb(skb); |
| 1910 | np->rx_skbuff[i] = NULL; |
| 1911 | } |
| 1912 | np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */ |
| 1913 | } |
| 1914 | for (i = 0; i < TX_RING_SIZE; i++) { |
| 1915 | np->tx_ring[i].next_desc = 0; |
| 1916 | skb = np->tx_skbuff[i]; |
| 1917 | if (skb) { |
| 1918 | dma_unmap_single(&np->pci_dev->dev, |
| 1919 | le32_to_cpu(np->tx_ring[i].frag[0].addr), |
| 1920 | skb->len, DMA_TO_DEVICE); |
| 1921 | dev_kfree_skb(skb); |
| 1922 | np->tx_skbuff[i] = NULL; |
| 1923 | } |
| 1924 | } |
| 1925 | |
| 1926 | return 0; |
| 1927 | } |
| 1928 | |
| 1929 | static void sundance_remove1(struct pci_dev *pdev) |
| 1930 | { |
| 1931 | struct net_device *dev = pci_get_drvdata(pdev); |
| 1932 | |
| 1933 | if (dev) { |
| 1934 | struct netdev_private *np = netdev_priv(dev); |
| 1935 | unregister_netdev(dev); |
| 1936 | dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, |
| 1937 | np->rx_ring, np->rx_ring_dma); |
| 1938 | dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, |
| 1939 | np->tx_ring, np->tx_ring_dma); |
| 1940 | pci_iounmap(pdev, np->base); |
| 1941 | pci_release_regions(pdev); |
| 1942 | free_netdev(dev); |
| 1943 | } |
| 1944 | } |
| 1945 | |
| 1946 | #ifdef CONFIG_PM |
| 1947 | |
| 1948 | static int sundance_suspend(struct pci_dev *pci_dev, pm_message_t state) |
| 1949 | { |
| 1950 | struct net_device *dev = pci_get_drvdata(pci_dev); |
| 1951 | struct netdev_private *np = netdev_priv(dev); |
| 1952 | void __iomem *ioaddr = np->base; |
| 1953 | |
| 1954 | if (!netif_running(dev)) |
| 1955 | return 0; |
| 1956 | |
| 1957 | netdev_close(dev); |
| 1958 | netif_device_detach(dev); |
| 1959 | |
| 1960 | pci_save_state(pci_dev); |
| 1961 | if (np->wol_enabled) { |
| 1962 | iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode); |
| 1963 | iowrite16(RxEnable, ioaddr + MACCtrl1); |
| 1964 | } |
| 1965 | pci_enable_wake(pci_dev, pci_choose_state(pci_dev, state), |
| 1966 | np->wol_enabled); |
| 1967 | pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); |
| 1968 | |
| 1969 | return 0; |
| 1970 | } |
| 1971 | |
| 1972 | static int sundance_resume(struct pci_dev *pci_dev) |
| 1973 | { |
| 1974 | struct net_device *dev = pci_get_drvdata(pci_dev); |
| 1975 | int err = 0; |
| 1976 | |
| 1977 | if (!netif_running(dev)) |
| 1978 | return 0; |
| 1979 | |
| 1980 | pci_set_power_state(pci_dev, PCI_D0); |
| 1981 | pci_restore_state(pci_dev); |
| 1982 | pci_enable_wake(pci_dev, PCI_D0, 0); |
| 1983 | |
| 1984 | err = netdev_open(dev); |
| 1985 | if (err) { |
| 1986 | printk(KERN_ERR "%s: Can't resume interface!\n", |
| 1987 | dev->name); |
| 1988 | goto out; |
| 1989 | } |
| 1990 | |
| 1991 | netif_device_attach(dev); |
| 1992 | |
| 1993 | out: |
| 1994 | return err; |
| 1995 | } |
| 1996 | |
| 1997 | #endif /* CONFIG_PM */ |
| 1998 | |
| 1999 | static struct pci_driver sundance_driver = { |
| 2000 | .name = DRV_NAME, |
| 2001 | .id_table = sundance_pci_tbl, |
| 2002 | .probe = sundance_probe1, |
| 2003 | .remove = sundance_remove1, |
| 2004 | #ifdef CONFIG_PM |
| 2005 | .suspend = sundance_suspend, |
| 2006 | .resume = sundance_resume, |
| 2007 | #endif /* CONFIG_PM */ |
| 2008 | }; |
| 2009 | |
| 2010 | static int __init sundance_init(void) |
| 2011 | { |
| 2012 | /* when a module, this is printed whether or not devices are found in probe */ |
| 2013 | #ifdef MODULE |
| 2014 | printk(version); |
| 2015 | #endif |
| 2016 | return pci_register_driver(&sundance_driver); |
| 2017 | } |
| 2018 | |
| 2019 | static void __exit sundance_exit(void) |
| 2020 | { |
| 2021 | pci_unregister_driver(&sundance_driver); |
| 2022 | } |
| 2023 | |
| 2024 | module_init(sundance_init); |
| 2025 | module_exit(sundance_exit); |
| 2026 | |
| 2027 | |