Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * This file contains functions used in USB interface module. |
| 3 | */ |
| 4 | |
| 5 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 6 | |
| 7 | #include <linux/delay.h> |
| 8 | #include <linux/module.h> |
| 9 | #include <linux/firmware.h> |
| 10 | #include <linux/netdevice.h> |
| 11 | #include <linux/slab.h> |
| 12 | #include <linux/usb.h> |
| 13 | #include <linux/olpc-ec.h> |
| 14 | |
| 15 | #ifdef CONFIG_OLPC |
| 16 | #include <asm/olpc.h> |
| 17 | #endif |
| 18 | |
| 19 | #define DRV_NAME "usb8xxx" |
| 20 | |
| 21 | #include "host.h" |
| 22 | #include "decl.h" |
| 23 | #include "defs.h" |
| 24 | #include "dev.h" |
| 25 | #include "cmd.h" |
| 26 | #include "if_usb.h" |
| 27 | |
| 28 | #define INSANEDEBUG 0 |
| 29 | #define lbs_deb_usb2(...) do { if (INSANEDEBUG) lbs_deb_usbd(__VA_ARGS__); } while (0) |
| 30 | |
| 31 | #define MESSAGE_HEADER_LEN 4 |
| 32 | |
| 33 | MODULE_FIRMWARE("libertas/usb8388_v9.bin"); |
| 34 | MODULE_FIRMWARE("libertas/usb8388_v5.bin"); |
| 35 | MODULE_FIRMWARE("libertas/usb8388.bin"); |
| 36 | MODULE_FIRMWARE("libertas/usb8682.bin"); |
| 37 | MODULE_FIRMWARE("usb8388.bin"); |
| 38 | |
| 39 | enum { |
| 40 | MODEL_UNKNOWN = 0x0, |
| 41 | MODEL_8388 = 0x1, |
| 42 | MODEL_8682 = 0x2 |
| 43 | }; |
| 44 | |
| 45 | /* table of firmware file names */ |
| 46 | static const struct lbs_fw_table fw_table[] = { |
| 47 | { MODEL_8388, "libertas/usb8388_olpc.bin", NULL }, |
| 48 | { MODEL_8388, "libertas/usb8388_v9.bin", NULL }, |
| 49 | { MODEL_8388, "libertas/usb8388_v5.bin", NULL }, |
| 50 | { MODEL_8388, "libertas/usb8388.bin", NULL }, |
| 51 | { MODEL_8388, "usb8388.bin", NULL }, |
| 52 | { MODEL_8682, "libertas/usb8682.bin", NULL } |
| 53 | }; |
| 54 | |
| 55 | static struct usb_device_id if_usb_table[] = { |
| 56 | /* Enter the device signature inside */ |
| 57 | { USB_DEVICE(0x1286, 0x2001), .driver_info = MODEL_8388 }, |
| 58 | { USB_DEVICE(0x05a3, 0x8388), .driver_info = MODEL_8388 }, |
| 59 | {} /* Terminating entry */ |
| 60 | }; |
| 61 | |
| 62 | MODULE_DEVICE_TABLE(usb, if_usb_table); |
| 63 | |
| 64 | static void if_usb_receive(struct urb *urb); |
| 65 | static void if_usb_receive_fwload(struct urb *urb); |
| 66 | static void if_usb_prog_firmware(struct lbs_private *priv, int ret, |
| 67 | const struct firmware *fw, |
| 68 | const struct firmware *unused); |
| 69 | static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type, |
| 70 | uint8_t *payload, uint16_t nb); |
| 71 | static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, |
| 72 | uint16_t nb); |
| 73 | static void if_usb_free(struct if_usb_card *cardp); |
| 74 | static int if_usb_submit_rx_urb(struct if_usb_card *cardp); |
| 75 | static int if_usb_reset_device(struct if_usb_card *cardp); |
| 76 | |
| 77 | /** |
| 78 | * if_usb_write_bulk_callback - callback function to handle the status |
| 79 | * of the URB |
| 80 | * @urb: pointer to &urb structure |
| 81 | * returns: N/A |
| 82 | */ |
| 83 | static void if_usb_write_bulk_callback(struct urb *urb) |
| 84 | { |
| 85 | struct if_usb_card *cardp = (struct if_usb_card *) urb->context; |
| 86 | |
| 87 | /* handle the transmission complete validations */ |
| 88 | |
| 89 | if (urb->status == 0) { |
| 90 | struct lbs_private *priv = cardp->priv; |
| 91 | |
| 92 | lbs_deb_usb2(&urb->dev->dev, "URB status is successful\n"); |
| 93 | lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n", |
| 94 | urb->actual_length); |
| 95 | |
| 96 | /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not |
| 97 | * passed up to the lbs level. |
| 98 | */ |
| 99 | if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT) |
| 100 | lbs_host_to_card_done(priv); |
| 101 | } else { |
| 102 | /* print the failure status number for debug */ |
| 103 | pr_info("URB in failure status: %d\n", urb->status); |
| 104 | } |
| 105 | } |
| 106 | |
| 107 | /** |
| 108 | * if_usb_free - free tx/rx urb, skb and rx buffer |
| 109 | * @cardp: pointer to &if_usb_card |
| 110 | * returns: N/A |
| 111 | */ |
| 112 | static void if_usb_free(struct if_usb_card *cardp) |
| 113 | { |
| 114 | lbs_deb_enter(LBS_DEB_USB); |
| 115 | |
| 116 | /* Unlink tx & rx urb */ |
| 117 | usb_kill_urb(cardp->tx_urb); |
| 118 | usb_kill_urb(cardp->rx_urb); |
| 119 | |
| 120 | usb_free_urb(cardp->tx_urb); |
| 121 | cardp->tx_urb = NULL; |
| 122 | |
| 123 | usb_free_urb(cardp->rx_urb); |
| 124 | cardp->rx_urb = NULL; |
| 125 | |
| 126 | kfree(cardp->ep_out_buf); |
| 127 | cardp->ep_out_buf = NULL; |
| 128 | |
| 129 | lbs_deb_leave(LBS_DEB_USB); |
| 130 | } |
| 131 | |
| 132 | static void if_usb_setup_firmware(struct lbs_private *priv) |
| 133 | { |
| 134 | struct if_usb_card *cardp = priv->card; |
| 135 | struct cmd_ds_set_boot2_ver b2_cmd; |
| 136 | struct cmd_ds_802_11_fw_wake_method wake_method; |
| 137 | |
| 138 | b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd)); |
| 139 | b2_cmd.action = 0; |
| 140 | b2_cmd.version = cardp->boot2_version; |
| 141 | |
| 142 | if (lbs_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd)) |
| 143 | lbs_deb_usb("Setting boot2 version failed\n"); |
| 144 | |
| 145 | priv->wol_gpio = 2; /* Wake via GPIO2... */ |
| 146 | priv->wol_gap = 20; /* ... after 20ms */ |
| 147 | lbs_host_sleep_cfg(priv, EHS_WAKE_ON_UNICAST_DATA, |
| 148 | (struct wol_config *) NULL); |
| 149 | |
| 150 | wake_method.hdr.size = cpu_to_le16(sizeof(wake_method)); |
| 151 | wake_method.action = cpu_to_le16(CMD_ACT_GET); |
| 152 | if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) { |
| 153 | netdev_info(priv->dev, "Firmware does not seem to support PS mode\n"); |
| 154 | priv->fwcapinfo &= ~FW_CAPINFO_PS; |
| 155 | } else { |
| 156 | if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) { |
| 157 | lbs_deb_usb("Firmware seems to support PS with wake-via-command\n"); |
| 158 | } else { |
| 159 | /* The versions which boot up this way don't seem to |
| 160 | work even if we set it to the command interrupt */ |
| 161 | priv->fwcapinfo &= ~FW_CAPINFO_PS; |
| 162 | netdev_info(priv->dev, |
| 163 | "Firmware doesn't wake via command interrupt; disabling PS mode\n"); |
| 164 | } |
| 165 | } |
| 166 | } |
| 167 | |
| 168 | static void if_usb_fw_timeo(unsigned long priv) |
| 169 | { |
| 170 | struct if_usb_card *cardp = (void *)priv; |
| 171 | |
| 172 | if (cardp->fwdnldover) { |
| 173 | lbs_deb_usb("Download complete, no event. Assuming success\n"); |
| 174 | } else { |
| 175 | pr_err("Download timed out\n"); |
| 176 | cardp->surprise_removed = 1; |
| 177 | } |
| 178 | wake_up(&cardp->fw_wq); |
| 179 | } |
| 180 | |
| 181 | #ifdef CONFIG_OLPC |
| 182 | static void if_usb_reset_olpc_card(struct lbs_private *priv) |
| 183 | { |
| 184 | printk(KERN_CRIT "Resetting OLPC wireless via EC...\n"); |
| 185 | olpc_ec_cmd(0x25, NULL, 0, NULL, 0); |
| 186 | } |
| 187 | #endif |
| 188 | |
| 189 | /** |
| 190 | * if_usb_probe - sets the configuration values |
| 191 | * @intf: &usb_interface pointer |
| 192 | * @id: pointer to usb_device_id |
| 193 | * returns: 0 on success, error code on failure |
| 194 | */ |
| 195 | static int if_usb_probe(struct usb_interface *intf, |
| 196 | const struct usb_device_id *id) |
| 197 | { |
| 198 | struct usb_device *udev; |
| 199 | struct usb_host_interface *iface_desc; |
| 200 | struct usb_endpoint_descriptor *endpoint; |
| 201 | struct lbs_private *priv; |
| 202 | struct if_usb_card *cardp; |
| 203 | int r = -ENOMEM; |
| 204 | int i; |
| 205 | |
| 206 | udev = interface_to_usbdev(intf); |
| 207 | |
| 208 | cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL); |
| 209 | if (!cardp) |
| 210 | goto error; |
| 211 | |
| 212 | setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp); |
| 213 | init_waitqueue_head(&cardp->fw_wq); |
| 214 | |
| 215 | cardp->udev = udev; |
| 216 | cardp->model = (uint32_t) id->driver_info; |
| 217 | iface_desc = intf->cur_altsetting; |
| 218 | |
| 219 | lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X" |
| 220 | " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n", |
| 221 | le16_to_cpu(udev->descriptor.bcdUSB), |
| 222 | udev->descriptor.bDeviceClass, |
| 223 | udev->descriptor.bDeviceSubClass, |
| 224 | udev->descriptor.bDeviceProtocol); |
| 225 | |
| 226 | for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| 227 | endpoint = &iface_desc->endpoint[i].desc; |
| 228 | if (usb_endpoint_is_bulk_in(endpoint)) { |
| 229 | cardp->ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize); |
| 230 | cardp->ep_in = usb_endpoint_num(endpoint); |
| 231 | |
| 232 | lbs_deb_usbd(&udev->dev, "in_endpoint = %d\n", cardp->ep_in); |
| 233 | lbs_deb_usbd(&udev->dev, "Bulk in size is %d\n", cardp->ep_in_size); |
| 234 | |
| 235 | } else if (usb_endpoint_is_bulk_out(endpoint)) { |
| 236 | cardp->ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize); |
| 237 | cardp->ep_out = usb_endpoint_num(endpoint); |
| 238 | |
| 239 | lbs_deb_usbd(&udev->dev, "out_endpoint = %d\n", cardp->ep_out); |
| 240 | lbs_deb_usbd(&udev->dev, "Bulk out size is %d\n", cardp->ep_out_size); |
| 241 | } |
| 242 | } |
| 243 | if (!cardp->ep_out_size || !cardp->ep_in_size) { |
| 244 | lbs_deb_usbd(&udev->dev, "Endpoints not found\n"); |
| 245 | goto dealloc; |
| 246 | } |
| 247 | if (!(cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL))) { |
| 248 | lbs_deb_usbd(&udev->dev, "Rx URB allocation failed\n"); |
| 249 | goto dealloc; |
| 250 | } |
| 251 | if (!(cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL))) { |
| 252 | lbs_deb_usbd(&udev->dev, "Tx URB allocation failed\n"); |
| 253 | goto dealloc; |
| 254 | } |
| 255 | cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, GFP_KERNEL); |
| 256 | if (!cardp->ep_out_buf) { |
| 257 | lbs_deb_usbd(&udev->dev, "Could not allocate buffer\n"); |
| 258 | goto dealloc; |
| 259 | } |
| 260 | |
| 261 | if (!(priv = lbs_add_card(cardp, &intf->dev))) |
| 262 | goto err_add_card; |
| 263 | |
| 264 | cardp->priv = priv; |
| 265 | |
| 266 | priv->hw_host_to_card = if_usb_host_to_card; |
| 267 | priv->enter_deep_sleep = NULL; |
| 268 | priv->exit_deep_sleep = NULL; |
| 269 | priv->reset_deep_sleep_wakeup = NULL; |
| 270 | #ifdef CONFIG_OLPC |
| 271 | if (machine_is_olpc()) |
| 272 | priv->reset_card = if_usb_reset_olpc_card; |
| 273 | #endif |
| 274 | |
| 275 | cardp->boot2_version = udev->descriptor.bcdDevice; |
| 276 | |
| 277 | usb_get_dev(udev); |
| 278 | usb_set_intfdata(intf, cardp); |
| 279 | |
| 280 | r = lbs_get_firmware_async(priv, &udev->dev, cardp->model, |
| 281 | fw_table, if_usb_prog_firmware); |
| 282 | if (r) |
| 283 | goto err_get_fw; |
| 284 | |
| 285 | return 0; |
| 286 | |
| 287 | err_get_fw: |
| 288 | lbs_remove_card(priv); |
| 289 | err_add_card: |
| 290 | if_usb_reset_device(cardp); |
| 291 | dealloc: |
| 292 | if_usb_free(cardp); |
| 293 | |
| 294 | error: |
| 295 | return r; |
| 296 | } |
| 297 | |
| 298 | /** |
| 299 | * if_usb_disconnect - free resource and cleanup |
| 300 | * @intf: USB interface structure |
| 301 | * returns: N/A |
| 302 | */ |
| 303 | static void if_usb_disconnect(struct usb_interface *intf) |
| 304 | { |
| 305 | struct if_usb_card *cardp = usb_get_intfdata(intf); |
| 306 | struct lbs_private *priv = cardp->priv; |
| 307 | |
| 308 | lbs_deb_enter(LBS_DEB_MAIN); |
| 309 | |
| 310 | cardp->surprise_removed = 1; |
| 311 | |
| 312 | if (priv) { |
| 313 | lbs_stop_card(priv); |
| 314 | lbs_remove_card(priv); |
| 315 | } |
| 316 | |
| 317 | /* Unlink and free urb */ |
| 318 | if_usb_free(cardp); |
| 319 | |
| 320 | usb_set_intfdata(intf, NULL); |
| 321 | usb_put_dev(interface_to_usbdev(intf)); |
| 322 | |
| 323 | lbs_deb_leave(LBS_DEB_MAIN); |
| 324 | } |
| 325 | |
| 326 | /** |
| 327 | * if_usb_send_fw_pkt - download FW |
| 328 | * @cardp: pointer to &struct if_usb_card |
| 329 | * returns: 0 |
| 330 | */ |
| 331 | static int if_usb_send_fw_pkt(struct if_usb_card *cardp) |
| 332 | { |
| 333 | struct fwdata *fwdata = cardp->ep_out_buf; |
| 334 | const uint8_t *firmware = cardp->fw->data; |
| 335 | |
| 336 | /* If we got a CRC failure on the last block, back |
| 337 | up and retry it */ |
| 338 | if (!cardp->CRC_OK) { |
| 339 | cardp->totalbytes = cardp->fwlastblksent; |
| 340 | cardp->fwseqnum--; |
| 341 | } |
| 342 | |
| 343 | lbs_deb_usb2(&cardp->udev->dev, "totalbytes = %d\n", |
| 344 | cardp->totalbytes); |
| 345 | |
| 346 | /* struct fwdata (which we sent to the card) has an |
| 347 | extra __le32 field in between the header and the data, |
| 348 | which is not in the struct fwheader in the actual |
| 349 | firmware binary. Insert the seqnum in the middle... */ |
| 350 | memcpy(&fwdata->hdr, &firmware[cardp->totalbytes], |
| 351 | sizeof(struct fwheader)); |
| 352 | |
| 353 | cardp->fwlastblksent = cardp->totalbytes; |
| 354 | cardp->totalbytes += sizeof(struct fwheader); |
| 355 | |
| 356 | memcpy(fwdata->data, &firmware[cardp->totalbytes], |
| 357 | le32_to_cpu(fwdata->hdr.datalength)); |
| 358 | |
| 359 | lbs_deb_usb2(&cardp->udev->dev, "Data length = %d\n", |
| 360 | le32_to_cpu(fwdata->hdr.datalength)); |
| 361 | |
| 362 | fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum); |
| 363 | cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength); |
| 364 | |
| 365 | usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) + |
| 366 | le32_to_cpu(fwdata->hdr.datalength)); |
| 367 | |
| 368 | if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) { |
| 369 | lbs_deb_usb2(&cardp->udev->dev, "There are data to follow\n"); |
| 370 | lbs_deb_usb2(&cardp->udev->dev, "seqnum = %d totalbytes = %d\n", |
| 371 | cardp->fwseqnum, cardp->totalbytes); |
| 372 | } else if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) { |
| 373 | lbs_deb_usb2(&cardp->udev->dev, "Host has finished FW downloading\n"); |
| 374 | lbs_deb_usb2(&cardp->udev->dev, "Donwloading FW JUMP BLOCK\n"); |
| 375 | |
| 376 | cardp->fwfinalblk = 1; |
| 377 | } |
| 378 | |
| 379 | lbs_deb_usb2(&cardp->udev->dev, "Firmware download done; size %d\n", |
| 380 | cardp->totalbytes); |
| 381 | |
| 382 | return 0; |
| 383 | } |
| 384 | |
| 385 | static int if_usb_reset_device(struct if_usb_card *cardp) |
| 386 | { |
| 387 | struct cmd_header *cmd = cardp->ep_out_buf + 4; |
| 388 | int ret; |
| 389 | |
| 390 | lbs_deb_enter(LBS_DEB_USB); |
| 391 | |
| 392 | *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); |
| 393 | |
| 394 | cmd->command = cpu_to_le16(CMD_802_11_RESET); |
| 395 | cmd->size = cpu_to_le16(sizeof(cmd)); |
| 396 | cmd->result = cpu_to_le16(0); |
| 397 | cmd->seqnum = cpu_to_le16(0x5a5a); |
| 398 | usb_tx_block(cardp, cardp->ep_out_buf, 4 + sizeof(struct cmd_header)); |
| 399 | |
| 400 | msleep(100); |
| 401 | ret = usb_reset_device(cardp->udev); |
| 402 | msleep(100); |
| 403 | |
| 404 | #ifdef CONFIG_OLPC |
| 405 | if (ret && machine_is_olpc()) |
| 406 | if_usb_reset_olpc_card(NULL); |
| 407 | #endif |
| 408 | |
| 409 | lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret); |
| 410 | |
| 411 | return ret; |
| 412 | } |
| 413 | |
| 414 | /** |
| 415 | * usb_tx_block - transfer the data to the device |
| 416 | * @cardp: pointer to &struct if_usb_card |
| 417 | * @payload: pointer to payload data |
| 418 | * @nb: data length |
| 419 | * returns: 0 for success or negative error code |
| 420 | */ |
| 421 | static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb) |
| 422 | { |
| 423 | int ret; |
| 424 | |
| 425 | /* check if device is removed */ |
| 426 | if (cardp->surprise_removed) { |
| 427 | lbs_deb_usbd(&cardp->udev->dev, "Device removed\n"); |
| 428 | ret = -ENODEV; |
| 429 | goto tx_ret; |
| 430 | } |
| 431 | |
| 432 | usb_fill_bulk_urb(cardp->tx_urb, cardp->udev, |
| 433 | usb_sndbulkpipe(cardp->udev, |
| 434 | cardp->ep_out), |
| 435 | payload, nb, if_usb_write_bulk_callback, cardp); |
| 436 | |
| 437 | cardp->tx_urb->transfer_flags |= URB_ZERO_PACKET; |
| 438 | |
| 439 | if ((ret = usb_submit_urb(cardp->tx_urb, GFP_ATOMIC))) { |
| 440 | lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret); |
| 441 | } else { |
| 442 | lbs_deb_usb2(&cardp->udev->dev, "usb_submit_urb success\n"); |
| 443 | ret = 0; |
| 444 | } |
| 445 | |
| 446 | tx_ret: |
| 447 | return ret; |
| 448 | } |
| 449 | |
| 450 | static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, |
| 451 | void (*callbackfn)(struct urb *urb)) |
| 452 | { |
| 453 | struct sk_buff *skb; |
| 454 | int ret = -1; |
| 455 | |
| 456 | if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) { |
| 457 | pr_err("No free skb\n"); |
| 458 | goto rx_ret; |
| 459 | } |
| 460 | |
| 461 | cardp->rx_skb = skb; |
| 462 | |
| 463 | /* Fill the receive configuration URB and initialise the Rx call back */ |
| 464 | usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, |
| 465 | usb_rcvbulkpipe(cardp->udev, cardp->ep_in), |
| 466 | skb->data + IPFIELD_ALIGN_OFFSET, |
| 467 | MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, |
| 468 | cardp); |
| 469 | |
| 470 | cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; |
| 471 | |
| 472 | lbs_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb); |
| 473 | if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) { |
| 474 | lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret); |
| 475 | kfree_skb(skb); |
| 476 | cardp->rx_skb = NULL; |
| 477 | ret = -1; |
| 478 | } else { |
| 479 | lbs_deb_usb2(&cardp->udev->dev, "Submit Rx URB success\n"); |
| 480 | ret = 0; |
| 481 | } |
| 482 | |
| 483 | rx_ret: |
| 484 | return ret; |
| 485 | } |
| 486 | |
| 487 | static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp) |
| 488 | { |
| 489 | return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload); |
| 490 | } |
| 491 | |
| 492 | static int if_usb_submit_rx_urb(struct if_usb_card *cardp) |
| 493 | { |
| 494 | return __if_usb_submit_rx_urb(cardp, &if_usb_receive); |
| 495 | } |
| 496 | |
| 497 | static void if_usb_receive_fwload(struct urb *urb) |
| 498 | { |
| 499 | struct if_usb_card *cardp = urb->context; |
| 500 | struct sk_buff *skb = cardp->rx_skb; |
| 501 | struct fwsyncheader *syncfwheader; |
| 502 | struct bootcmdresp bootcmdresp; |
| 503 | |
| 504 | if (urb->status) { |
| 505 | lbs_deb_usbd(&cardp->udev->dev, |
| 506 | "URB status is failed during fw load\n"); |
| 507 | kfree_skb(skb); |
| 508 | return; |
| 509 | } |
| 510 | |
| 511 | if (cardp->fwdnldover) { |
| 512 | __le32 *tmp = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET); |
| 513 | |
| 514 | if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) && |
| 515 | tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) { |
| 516 | pr_info("Firmware ready event received\n"); |
| 517 | wake_up(&cardp->fw_wq); |
| 518 | } else { |
| 519 | lbs_deb_usb("Waiting for confirmation; got %x %x\n", |
| 520 | le32_to_cpu(tmp[0]), le32_to_cpu(tmp[1])); |
| 521 | if_usb_submit_rx_urb_fwload(cardp); |
| 522 | } |
| 523 | kfree_skb(skb); |
| 524 | return; |
| 525 | } |
| 526 | if (cardp->bootcmdresp <= 0) { |
| 527 | memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET, |
| 528 | sizeof(bootcmdresp)); |
| 529 | |
| 530 | if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) { |
| 531 | kfree_skb(skb); |
| 532 | if_usb_submit_rx_urb_fwload(cardp); |
| 533 | cardp->bootcmdresp = BOOT_CMD_RESP_OK; |
| 534 | lbs_deb_usbd(&cardp->udev->dev, |
| 535 | "Received valid boot command response\n"); |
| 536 | return; |
| 537 | } |
| 538 | if (bootcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) { |
| 539 | if (bootcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) || |
| 540 | bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) || |
| 541 | bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) { |
| 542 | if (!cardp->bootcmdresp) |
| 543 | pr_info("Firmware already seems alive; resetting\n"); |
| 544 | cardp->bootcmdresp = -1; |
| 545 | } else { |
| 546 | pr_info("boot cmd response wrong magic number (0x%x)\n", |
| 547 | le32_to_cpu(bootcmdresp.magic)); |
| 548 | } |
| 549 | } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) && |
| 550 | (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) && |
| 551 | (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) { |
| 552 | pr_info("boot cmd response cmd_tag error (%d)\n", |
| 553 | bootcmdresp.cmd); |
| 554 | } else if (bootcmdresp.result != BOOT_CMD_RESP_OK) { |
| 555 | pr_info("boot cmd response result error (%d)\n", |
| 556 | bootcmdresp.result); |
| 557 | } else { |
| 558 | cardp->bootcmdresp = 1; |
| 559 | lbs_deb_usbd(&cardp->udev->dev, |
| 560 | "Received valid boot command response\n"); |
| 561 | } |
| 562 | kfree_skb(skb); |
| 563 | if_usb_submit_rx_urb_fwload(cardp); |
| 564 | return; |
| 565 | } |
| 566 | |
| 567 | syncfwheader = kmemdup(skb->data + IPFIELD_ALIGN_OFFSET, |
| 568 | sizeof(struct fwsyncheader), GFP_ATOMIC); |
| 569 | if (!syncfwheader) { |
| 570 | lbs_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n"); |
| 571 | kfree_skb(skb); |
| 572 | return; |
| 573 | } |
| 574 | |
| 575 | if (!syncfwheader->cmd) { |
| 576 | lbs_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n"); |
| 577 | lbs_deb_usb2(&cardp->udev->dev, "FW received Blk seqnum = %d\n", |
| 578 | le32_to_cpu(syncfwheader->seqnum)); |
| 579 | cardp->CRC_OK = 1; |
| 580 | } else { |
| 581 | lbs_deb_usbd(&cardp->udev->dev, "FW received Blk with CRC error\n"); |
| 582 | cardp->CRC_OK = 0; |
| 583 | } |
| 584 | |
| 585 | kfree_skb(skb); |
| 586 | |
| 587 | /* Give device 5s to either write firmware to its RAM or eeprom */ |
| 588 | mod_timer(&cardp->fw_timeout, jiffies + (HZ*5)); |
| 589 | |
| 590 | if (cardp->fwfinalblk) { |
| 591 | cardp->fwdnldover = 1; |
| 592 | goto exit; |
| 593 | } |
| 594 | |
| 595 | if_usb_send_fw_pkt(cardp); |
| 596 | |
| 597 | exit: |
| 598 | if_usb_submit_rx_urb_fwload(cardp); |
| 599 | |
| 600 | kfree(syncfwheader); |
| 601 | } |
| 602 | |
| 603 | #define MRVDRV_MIN_PKT_LEN 30 |
| 604 | |
| 605 | static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb, |
| 606 | struct if_usb_card *cardp, |
| 607 | struct lbs_private *priv) |
| 608 | { |
| 609 | if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN |
| 610 | || recvlength < MRVDRV_MIN_PKT_LEN) { |
| 611 | lbs_deb_usbd(&cardp->udev->dev, "Packet length is Invalid\n"); |
| 612 | kfree_skb(skb); |
| 613 | return; |
| 614 | } |
| 615 | |
| 616 | skb_reserve(skb, IPFIELD_ALIGN_OFFSET); |
| 617 | skb_put(skb, recvlength); |
| 618 | skb_pull(skb, MESSAGE_HEADER_LEN); |
| 619 | |
| 620 | lbs_process_rxed_packet(priv, skb); |
| 621 | } |
| 622 | |
| 623 | static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff, |
| 624 | struct sk_buff *skb, |
| 625 | struct if_usb_card *cardp, |
| 626 | struct lbs_private *priv) |
| 627 | { |
| 628 | u8 i; |
| 629 | |
| 630 | if (recvlength > LBS_CMD_BUFFER_SIZE) { |
| 631 | lbs_deb_usbd(&cardp->udev->dev, |
| 632 | "The receive buffer is too large\n"); |
| 633 | kfree_skb(skb); |
| 634 | return; |
| 635 | } |
| 636 | |
| 637 | BUG_ON(!in_interrupt()); |
| 638 | |
| 639 | spin_lock(&priv->driver_lock); |
| 640 | |
| 641 | i = (priv->resp_idx == 0) ? 1 : 0; |
| 642 | BUG_ON(priv->resp_len[i]); |
| 643 | priv->resp_len[i] = (recvlength - MESSAGE_HEADER_LEN); |
| 644 | memcpy(priv->resp_buf[i], recvbuff + MESSAGE_HEADER_LEN, |
| 645 | priv->resp_len[i]); |
| 646 | kfree_skb(skb); |
| 647 | lbs_notify_command_response(priv, i); |
| 648 | |
| 649 | spin_unlock(&priv->driver_lock); |
| 650 | |
| 651 | lbs_deb_usbd(&cardp->udev->dev, |
| 652 | "Wake up main thread to handle cmd response\n"); |
| 653 | } |
| 654 | |
| 655 | /** |
| 656 | * if_usb_receive - read the packet into the upload buffer, |
| 657 | * wake up the main thread and initialise the Rx callack |
| 658 | * |
| 659 | * @urb: pointer to &struct urb |
| 660 | * returns: N/A |
| 661 | */ |
| 662 | static void if_usb_receive(struct urb *urb) |
| 663 | { |
| 664 | struct if_usb_card *cardp = urb->context; |
| 665 | struct sk_buff *skb = cardp->rx_skb; |
| 666 | struct lbs_private *priv = cardp->priv; |
| 667 | int recvlength = urb->actual_length; |
| 668 | uint8_t *recvbuff = NULL; |
| 669 | uint32_t recvtype = 0; |
| 670 | __le32 *pkt = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET); |
| 671 | uint32_t event; |
| 672 | |
| 673 | lbs_deb_enter(LBS_DEB_USB); |
| 674 | |
| 675 | if (recvlength) { |
| 676 | if (urb->status) { |
| 677 | lbs_deb_usbd(&cardp->udev->dev, "RX URB failed: %d\n", |
| 678 | urb->status); |
| 679 | kfree_skb(skb); |
| 680 | goto setup_for_next; |
| 681 | } |
| 682 | |
| 683 | recvbuff = skb->data + IPFIELD_ALIGN_OFFSET; |
| 684 | recvtype = le32_to_cpu(pkt[0]); |
| 685 | lbs_deb_usbd(&cardp->udev->dev, |
| 686 | "Recv length = 0x%x, Recv type = 0x%X\n", |
| 687 | recvlength, recvtype); |
| 688 | } else if (urb->status) { |
| 689 | kfree_skb(skb); |
| 690 | goto rx_exit; |
| 691 | } |
| 692 | |
| 693 | switch (recvtype) { |
| 694 | case CMD_TYPE_DATA: |
| 695 | process_cmdtypedata(recvlength, skb, cardp, priv); |
| 696 | break; |
| 697 | |
| 698 | case CMD_TYPE_REQUEST: |
| 699 | process_cmdrequest(recvlength, recvbuff, skb, cardp, priv); |
| 700 | break; |
| 701 | |
| 702 | case CMD_TYPE_INDICATION: |
| 703 | /* Event handling */ |
| 704 | event = le32_to_cpu(pkt[1]); |
| 705 | lbs_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n", event); |
| 706 | kfree_skb(skb); |
| 707 | |
| 708 | /* Icky undocumented magic special case */ |
| 709 | if (event & 0xffff0000) { |
| 710 | u32 trycount = (event & 0xffff0000) >> 16; |
| 711 | |
| 712 | lbs_send_tx_feedback(priv, trycount); |
| 713 | } else |
| 714 | lbs_queue_event(priv, event & 0xFF); |
| 715 | break; |
| 716 | |
| 717 | default: |
| 718 | lbs_deb_usbd(&cardp->udev->dev, "Unknown command type 0x%X\n", |
| 719 | recvtype); |
| 720 | kfree_skb(skb); |
| 721 | break; |
| 722 | } |
| 723 | |
| 724 | setup_for_next: |
| 725 | if_usb_submit_rx_urb(cardp); |
| 726 | rx_exit: |
| 727 | lbs_deb_leave(LBS_DEB_USB); |
| 728 | } |
| 729 | |
| 730 | /** |
| 731 | * if_usb_host_to_card - downloads data to FW |
| 732 | * @priv: pointer to &struct lbs_private structure |
| 733 | * @type: type of data |
| 734 | * @payload: pointer to data buffer |
| 735 | * @nb: number of bytes |
| 736 | * returns: 0 for success or negative error code |
| 737 | */ |
| 738 | static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type, |
| 739 | uint8_t *payload, uint16_t nb) |
| 740 | { |
| 741 | struct if_usb_card *cardp = priv->card; |
| 742 | |
| 743 | lbs_deb_usbd(&cardp->udev->dev,"*** type = %u\n", type); |
| 744 | lbs_deb_usbd(&cardp->udev->dev,"size after = %d\n", nb); |
| 745 | |
| 746 | if (type == MVMS_CMD) { |
| 747 | *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); |
| 748 | priv->dnld_sent = DNLD_CMD_SENT; |
| 749 | } else { |
| 750 | *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA); |
| 751 | priv->dnld_sent = DNLD_DATA_SENT; |
| 752 | } |
| 753 | |
| 754 | memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb); |
| 755 | |
| 756 | return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN); |
| 757 | } |
| 758 | |
| 759 | /** |
| 760 | * if_usb_issue_boot_command - issues Boot command to the Boot2 code |
| 761 | * @cardp: pointer to &if_usb_card |
| 762 | * @ivalue: 1:Boot from FW by USB-Download |
| 763 | * 2:Boot from FW in EEPROM |
| 764 | * returns: 0 for success or negative error code |
| 765 | */ |
| 766 | static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue) |
| 767 | { |
| 768 | struct bootcmd *bootcmd = cardp->ep_out_buf; |
| 769 | |
| 770 | /* Prepare command */ |
| 771 | bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER); |
| 772 | bootcmd->cmd = ivalue; |
| 773 | memset(bootcmd->pad, 0, sizeof(bootcmd->pad)); |
| 774 | |
| 775 | /* Issue command */ |
| 776 | usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd)); |
| 777 | |
| 778 | return 0; |
| 779 | } |
| 780 | |
| 781 | |
| 782 | /** |
| 783 | * check_fwfile_format - check the validity of Boot2/FW image |
| 784 | * |
| 785 | * @data: pointer to image |
| 786 | * @totlen: image length |
| 787 | * returns: 0 (good) or 1 (failure) |
| 788 | */ |
| 789 | static int check_fwfile_format(const uint8_t *data, uint32_t totlen) |
| 790 | { |
| 791 | uint32_t bincmd, exit; |
| 792 | uint32_t blksize, offset, len; |
| 793 | int ret; |
| 794 | |
| 795 | ret = 1; |
| 796 | exit = len = 0; |
| 797 | |
| 798 | do { |
| 799 | struct fwheader *fwh = (void *)data; |
| 800 | |
| 801 | bincmd = le32_to_cpu(fwh->dnldcmd); |
| 802 | blksize = le32_to_cpu(fwh->datalength); |
| 803 | switch (bincmd) { |
| 804 | case FW_HAS_DATA_TO_RECV: |
| 805 | offset = sizeof(struct fwheader) + blksize; |
| 806 | data += offset; |
| 807 | len += offset; |
| 808 | if (len >= totlen) |
| 809 | exit = 1; |
| 810 | break; |
| 811 | case FW_HAS_LAST_BLOCK: |
| 812 | exit = 1; |
| 813 | ret = 0; |
| 814 | break; |
| 815 | default: |
| 816 | exit = 1; |
| 817 | break; |
| 818 | } |
| 819 | } while (!exit); |
| 820 | |
| 821 | if (ret) |
| 822 | pr_err("firmware file format check FAIL\n"); |
| 823 | else |
| 824 | lbs_deb_fw("firmware file format check PASS\n"); |
| 825 | |
| 826 | return ret; |
| 827 | } |
| 828 | |
| 829 | static void if_usb_prog_firmware(struct lbs_private *priv, int ret, |
| 830 | const struct firmware *fw, |
| 831 | const struct firmware *unused) |
| 832 | { |
| 833 | struct if_usb_card *cardp = priv->card; |
| 834 | int i = 0; |
| 835 | static int reset_count = 10; |
| 836 | |
| 837 | lbs_deb_enter(LBS_DEB_USB); |
| 838 | |
| 839 | if (ret) { |
| 840 | pr_err("failed to find firmware (%d)\n", ret); |
| 841 | goto done; |
| 842 | } |
| 843 | |
| 844 | cardp->fw = fw; |
| 845 | if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) { |
| 846 | ret = -EINVAL; |
| 847 | goto done; |
| 848 | } |
| 849 | |
| 850 | /* Cancel any pending usb business */ |
| 851 | usb_kill_urb(cardp->rx_urb); |
| 852 | usb_kill_urb(cardp->tx_urb); |
| 853 | |
| 854 | cardp->fwlastblksent = 0; |
| 855 | cardp->fwdnldover = 0; |
| 856 | cardp->totalbytes = 0; |
| 857 | cardp->fwfinalblk = 0; |
| 858 | cardp->bootcmdresp = 0; |
| 859 | |
| 860 | restart: |
| 861 | if (if_usb_submit_rx_urb_fwload(cardp) < 0) { |
| 862 | lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n"); |
| 863 | ret = -EIO; |
| 864 | goto done; |
| 865 | } |
| 866 | |
| 867 | cardp->bootcmdresp = 0; |
| 868 | do { |
| 869 | int j = 0; |
| 870 | i++; |
| 871 | if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB); |
| 872 | /* wait for command response */ |
| 873 | do { |
| 874 | j++; |
| 875 | msleep_interruptible(100); |
| 876 | } while (cardp->bootcmdresp == 0 && j < 10); |
| 877 | } while (cardp->bootcmdresp == 0 && i < 5); |
| 878 | |
| 879 | if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) { |
| 880 | /* Return to normal operation */ |
| 881 | ret = -EOPNOTSUPP; |
| 882 | usb_kill_urb(cardp->rx_urb); |
| 883 | usb_kill_urb(cardp->tx_urb); |
| 884 | if (if_usb_submit_rx_urb(cardp) < 0) |
| 885 | ret = -EIO; |
| 886 | goto done; |
| 887 | } else if (cardp->bootcmdresp <= 0) { |
| 888 | if (--reset_count >= 0) { |
| 889 | if_usb_reset_device(cardp); |
| 890 | goto restart; |
| 891 | } |
| 892 | ret = -EIO; |
| 893 | goto done; |
| 894 | } |
| 895 | |
| 896 | i = 0; |
| 897 | |
| 898 | cardp->totalbytes = 0; |
| 899 | cardp->fwlastblksent = 0; |
| 900 | cardp->CRC_OK = 1; |
| 901 | cardp->fwdnldover = 0; |
| 902 | cardp->fwseqnum = -1; |
| 903 | cardp->totalbytes = 0; |
| 904 | cardp->fwfinalblk = 0; |
| 905 | |
| 906 | /* Send the first firmware packet... */ |
| 907 | if_usb_send_fw_pkt(cardp); |
| 908 | |
| 909 | /* ... and wait for the process to complete */ |
| 910 | wait_event_interruptible(cardp->fw_wq, cardp->surprise_removed || cardp->fwdnldover); |
| 911 | |
| 912 | del_timer_sync(&cardp->fw_timeout); |
| 913 | usb_kill_urb(cardp->rx_urb); |
| 914 | |
| 915 | if (!cardp->fwdnldover) { |
| 916 | pr_info("failed to load fw, resetting device!\n"); |
| 917 | if (--reset_count >= 0) { |
| 918 | if_usb_reset_device(cardp); |
| 919 | goto restart; |
| 920 | } |
| 921 | |
| 922 | pr_info("FW download failure, time = %d ms\n", i * 100); |
| 923 | ret = -EIO; |
| 924 | goto done; |
| 925 | } |
| 926 | |
| 927 | cardp->priv->fw_ready = 1; |
| 928 | if_usb_submit_rx_urb(cardp); |
| 929 | |
| 930 | if (lbs_start_card(priv)) |
| 931 | goto done; |
| 932 | |
| 933 | if_usb_setup_firmware(priv); |
| 934 | |
| 935 | /* |
| 936 | * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware. |
| 937 | */ |
| 938 | priv->wol_criteria = EHS_REMOVE_WAKEUP; |
| 939 | if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL)) |
| 940 | priv->ehs_remove_supported = false; |
| 941 | |
| 942 | done: |
| 943 | cardp->fw = NULL; |
| 944 | lbs_deb_leave(LBS_DEB_USB); |
| 945 | } |
| 946 | |
| 947 | |
| 948 | #ifdef CONFIG_PM |
| 949 | static int if_usb_suspend(struct usb_interface *intf, pm_message_t message) |
| 950 | { |
| 951 | struct if_usb_card *cardp = usb_get_intfdata(intf); |
| 952 | struct lbs_private *priv = cardp->priv; |
| 953 | int ret; |
| 954 | |
| 955 | lbs_deb_enter(LBS_DEB_USB); |
| 956 | |
| 957 | if (priv->psstate != PS_STATE_FULL_POWER) { |
| 958 | ret = -1; |
| 959 | goto out; |
| 960 | } |
| 961 | |
| 962 | #ifdef CONFIG_OLPC |
| 963 | if (machine_is_olpc()) { |
| 964 | if (priv->wol_criteria == EHS_REMOVE_WAKEUP) |
| 965 | olpc_ec_wakeup_clear(EC_SCI_SRC_WLAN); |
| 966 | else |
| 967 | olpc_ec_wakeup_set(EC_SCI_SRC_WLAN); |
| 968 | } |
| 969 | #endif |
| 970 | |
| 971 | ret = lbs_suspend(priv); |
| 972 | if (ret) |
| 973 | goto out; |
| 974 | |
| 975 | /* Unlink tx & rx urb */ |
| 976 | usb_kill_urb(cardp->tx_urb); |
| 977 | usb_kill_urb(cardp->rx_urb); |
| 978 | |
| 979 | out: |
| 980 | lbs_deb_leave(LBS_DEB_USB); |
| 981 | return ret; |
| 982 | } |
| 983 | |
| 984 | static int if_usb_resume(struct usb_interface *intf) |
| 985 | { |
| 986 | struct if_usb_card *cardp = usb_get_intfdata(intf); |
| 987 | struct lbs_private *priv = cardp->priv; |
| 988 | |
| 989 | lbs_deb_enter(LBS_DEB_USB); |
| 990 | |
| 991 | if_usb_submit_rx_urb(cardp); |
| 992 | |
| 993 | lbs_resume(priv); |
| 994 | |
| 995 | lbs_deb_leave(LBS_DEB_USB); |
| 996 | return 0; |
| 997 | } |
| 998 | #else |
| 999 | #define if_usb_suspend NULL |
| 1000 | #define if_usb_resume NULL |
| 1001 | #endif |
| 1002 | |
| 1003 | static struct usb_driver if_usb_driver = { |
| 1004 | .name = DRV_NAME, |
| 1005 | .probe = if_usb_probe, |
| 1006 | .disconnect = if_usb_disconnect, |
| 1007 | .id_table = if_usb_table, |
| 1008 | .suspend = if_usb_suspend, |
| 1009 | .resume = if_usb_resume, |
| 1010 | .reset_resume = if_usb_resume, |
| 1011 | .disable_hub_initiated_lpm = 1, |
| 1012 | }; |
| 1013 | |
| 1014 | module_usb_driver(if_usb_driver); |
| 1015 | |
| 1016 | MODULE_DESCRIPTION("8388 USB WLAN Driver"); |
| 1017 | MODULE_AUTHOR("Marvell International Ltd. and Red Hat, Inc."); |
| 1018 | MODULE_LICENSE("GPL"); |