Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * This file is part of wl12xx |
| 3 | * |
| 4 | * Copyright (C) 2012 Texas Instruments. All rights reserved. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License |
| 8 | * version 2 as published by the Free Software Foundation. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, but |
| 11 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 13 | * General Public License for more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, write to the Free Software |
| 17 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 18 | * 02110-1301 USA |
| 19 | * |
| 20 | */ |
| 21 | |
| 22 | #include <linux/ieee80211.h> |
| 23 | #include "scan.h" |
| 24 | #include "../wlcore/debug.h" |
| 25 | #include "../wlcore/tx.h" |
| 26 | |
| 27 | static int wl1271_get_scan_channels(struct wl1271 *wl, |
| 28 | struct cfg80211_scan_request *req, |
| 29 | struct basic_scan_channel_params *channels, |
| 30 | enum ieee80211_band band, bool passive) |
| 31 | { |
| 32 | struct conf_scan_settings *c = &wl->conf.scan; |
| 33 | int i, j; |
| 34 | u32 flags; |
| 35 | |
| 36 | for (i = 0, j = 0; |
| 37 | i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; |
| 38 | i++) { |
| 39 | flags = req->channels[i]->flags; |
| 40 | |
| 41 | if (!test_bit(i, wl->scan.scanned_ch) && |
| 42 | !(flags & IEEE80211_CHAN_DISABLED) && |
| 43 | (req->channels[i]->band == band) && |
| 44 | /* |
| 45 | * In passive scans, we scan all remaining |
| 46 | * channels, even if not marked as such. |
| 47 | * In active scans, we only scan channels not |
| 48 | * marked as passive. |
| 49 | */ |
| 50 | (passive || !(flags & IEEE80211_CHAN_NO_IR))) { |
| 51 | wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", |
| 52 | req->channels[i]->band, |
| 53 | req->channels[i]->center_freq); |
| 54 | wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", |
| 55 | req->channels[i]->hw_value, |
| 56 | req->channels[i]->flags); |
| 57 | wl1271_debug(DEBUG_SCAN, |
| 58 | "max_antenna_gain %d, max_power %d", |
| 59 | req->channels[i]->max_antenna_gain, |
| 60 | req->channels[i]->max_power); |
| 61 | wl1271_debug(DEBUG_SCAN, "beacon_found %d", |
| 62 | req->channels[i]->beacon_found); |
| 63 | |
| 64 | if (!passive) { |
| 65 | channels[j].min_duration = |
| 66 | cpu_to_le32(c->min_dwell_time_active); |
| 67 | channels[j].max_duration = |
| 68 | cpu_to_le32(c->max_dwell_time_active); |
| 69 | } else { |
| 70 | channels[j].min_duration = |
| 71 | cpu_to_le32(c->dwell_time_passive); |
| 72 | channels[j].max_duration = |
| 73 | cpu_to_le32(c->dwell_time_passive); |
| 74 | } |
| 75 | channels[j].early_termination = 0; |
| 76 | channels[j].tx_power_att = req->channels[i]->max_power; |
| 77 | channels[j].channel = req->channels[i]->hw_value; |
| 78 | |
| 79 | memset(&channels[j].bssid_lsb, 0xff, 4); |
| 80 | memset(&channels[j].bssid_msb, 0xff, 2); |
| 81 | |
| 82 | /* Mark the channels we already used */ |
| 83 | set_bit(i, wl->scan.scanned_ch); |
| 84 | |
| 85 | j++; |
| 86 | } |
| 87 | } |
| 88 | |
| 89 | return j; |
| 90 | } |
| 91 | |
| 92 | #define WL1271_NOTHING_TO_SCAN 1 |
| 93 | |
| 94 | static int wl1271_scan_send(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| 95 | enum ieee80211_band band, |
| 96 | bool passive, u32 basic_rate) |
| 97 | { |
| 98 | struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif); |
| 99 | struct wl1271_cmd_scan *cmd; |
| 100 | struct wl1271_cmd_trigger_scan_to *trigger; |
| 101 | int ret; |
| 102 | u16 scan_options = 0; |
| 103 | |
| 104 | /* skip active scans if we don't have SSIDs */ |
| 105 | if (!passive && wl->scan.req->n_ssids == 0) |
| 106 | return WL1271_NOTHING_TO_SCAN; |
| 107 | |
| 108 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 109 | trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); |
| 110 | if (!cmd || !trigger) { |
| 111 | ret = -ENOMEM; |
| 112 | goto out; |
| 113 | } |
| 114 | |
| 115 | if (wl->conf.scan.split_scan_timeout) |
| 116 | scan_options |= WL1271_SCAN_OPT_SPLIT_SCAN; |
| 117 | |
| 118 | if (passive) |
| 119 | scan_options |= WL1271_SCAN_OPT_PASSIVE; |
| 120 | |
| 121 | /* scan on the dev role if the regular one is not started */ |
| 122 | if (wlcore_is_p2p_mgmt(wlvif)) |
| 123 | cmd->params.role_id = wlvif->dev_role_id; |
| 124 | else |
| 125 | cmd->params.role_id = wlvif->role_id; |
| 126 | |
| 127 | if (WARN_ON(cmd->params.role_id == WL12XX_INVALID_ROLE_ID)) { |
| 128 | ret = -EINVAL; |
| 129 | goto out; |
| 130 | } |
| 131 | |
| 132 | cmd->params.scan_options = cpu_to_le16(scan_options); |
| 133 | |
| 134 | cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, |
| 135 | cmd->channels, |
| 136 | band, passive); |
| 137 | if (cmd->params.n_ch == 0) { |
| 138 | ret = WL1271_NOTHING_TO_SCAN; |
| 139 | goto out; |
| 140 | } |
| 141 | |
| 142 | cmd->params.tx_rate = cpu_to_le32(basic_rate); |
| 143 | cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; |
| 144 | cmd->params.tid_trigger = CONF_TX_AC_ANY_TID; |
| 145 | cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; |
| 146 | |
| 147 | if (band == IEEE80211_BAND_2GHZ) |
| 148 | cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; |
| 149 | else |
| 150 | cmd->params.band = WL1271_SCAN_BAND_5_GHZ; |
| 151 | |
| 152 | if (wl->scan.ssid_len && wl->scan.ssid) { |
| 153 | cmd->params.ssid_len = wl->scan.ssid_len; |
| 154 | memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); |
| 155 | } |
| 156 | |
| 157 | memcpy(cmd->addr, vif->addr, ETH_ALEN); |
| 158 | |
| 159 | ret = wl12xx_cmd_build_probe_req(wl, wlvif, |
| 160 | cmd->params.role_id, band, |
| 161 | wl->scan.ssid, wl->scan.ssid_len, |
| 162 | wl->scan.req->ie, |
| 163 | wl->scan.req->ie_len, NULL, 0, false); |
| 164 | if (ret < 0) { |
| 165 | wl1271_error("PROBE request template failed"); |
| 166 | goto out; |
| 167 | } |
| 168 | |
| 169 | trigger->timeout = cpu_to_le32(wl->conf.scan.split_scan_timeout); |
| 170 | ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, |
| 171 | sizeof(*trigger), 0); |
| 172 | if (ret < 0) { |
| 173 | wl1271_error("trigger scan to failed for hw scan"); |
| 174 | goto out; |
| 175 | } |
| 176 | |
| 177 | wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); |
| 178 | |
| 179 | ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); |
| 180 | if (ret < 0) { |
| 181 | wl1271_error("SCAN failed"); |
| 182 | goto out; |
| 183 | } |
| 184 | |
| 185 | out: |
| 186 | kfree(cmd); |
| 187 | kfree(trigger); |
| 188 | return ret; |
| 189 | } |
| 190 | |
| 191 | int wl12xx_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| 192 | { |
| 193 | struct wl1271_cmd_header *cmd = NULL; |
| 194 | int ret = 0; |
| 195 | |
| 196 | if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) |
| 197 | return -EINVAL; |
| 198 | |
| 199 | wl1271_debug(DEBUG_CMD, "cmd scan stop"); |
| 200 | |
| 201 | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| 202 | if (!cmd) { |
| 203 | ret = -ENOMEM; |
| 204 | goto out; |
| 205 | } |
| 206 | |
| 207 | ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, |
| 208 | sizeof(*cmd), 0); |
| 209 | if (ret < 0) { |
| 210 | wl1271_error("cmd stop_scan failed"); |
| 211 | goto out; |
| 212 | } |
| 213 | out: |
| 214 | kfree(cmd); |
| 215 | return ret; |
| 216 | } |
| 217 | |
| 218 | void wl1271_scan_stm(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| 219 | { |
| 220 | int ret = 0; |
| 221 | enum ieee80211_band band; |
| 222 | u32 rate, mask; |
| 223 | |
| 224 | switch (wl->scan.state) { |
| 225 | case WL1271_SCAN_STATE_IDLE: |
| 226 | break; |
| 227 | |
| 228 | case WL1271_SCAN_STATE_2GHZ_ACTIVE: |
| 229 | band = IEEE80211_BAND_2GHZ; |
| 230 | mask = wlvif->bitrate_masks[band]; |
| 231 | if (wl->scan.req->no_cck) { |
| 232 | mask &= ~CONF_TX_CCK_RATES; |
| 233 | if (!mask) |
| 234 | mask = CONF_TX_RATE_MASK_BASIC_P2P; |
| 235 | } |
| 236 | rate = wl1271_tx_min_rate_get(wl, mask); |
| 237 | ret = wl1271_scan_send(wl, wlvif, band, false, rate); |
| 238 | if (ret == WL1271_NOTHING_TO_SCAN) { |
| 239 | wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; |
| 240 | wl1271_scan_stm(wl, wlvif); |
| 241 | } |
| 242 | |
| 243 | break; |
| 244 | |
| 245 | case WL1271_SCAN_STATE_2GHZ_PASSIVE: |
| 246 | band = IEEE80211_BAND_2GHZ; |
| 247 | mask = wlvif->bitrate_masks[band]; |
| 248 | if (wl->scan.req->no_cck) { |
| 249 | mask &= ~CONF_TX_CCK_RATES; |
| 250 | if (!mask) |
| 251 | mask = CONF_TX_RATE_MASK_BASIC_P2P; |
| 252 | } |
| 253 | rate = wl1271_tx_min_rate_get(wl, mask); |
| 254 | ret = wl1271_scan_send(wl, wlvif, band, true, rate); |
| 255 | if (ret == WL1271_NOTHING_TO_SCAN) { |
| 256 | if (wl->enable_11a) |
| 257 | wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; |
| 258 | else |
| 259 | wl->scan.state = WL1271_SCAN_STATE_DONE; |
| 260 | wl1271_scan_stm(wl, wlvif); |
| 261 | } |
| 262 | |
| 263 | break; |
| 264 | |
| 265 | case WL1271_SCAN_STATE_5GHZ_ACTIVE: |
| 266 | band = IEEE80211_BAND_5GHZ; |
| 267 | rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); |
| 268 | ret = wl1271_scan_send(wl, wlvif, band, false, rate); |
| 269 | if (ret == WL1271_NOTHING_TO_SCAN) { |
| 270 | wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; |
| 271 | wl1271_scan_stm(wl, wlvif); |
| 272 | } |
| 273 | |
| 274 | break; |
| 275 | |
| 276 | case WL1271_SCAN_STATE_5GHZ_PASSIVE: |
| 277 | band = IEEE80211_BAND_5GHZ; |
| 278 | rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); |
| 279 | ret = wl1271_scan_send(wl, wlvif, band, true, rate); |
| 280 | if (ret == WL1271_NOTHING_TO_SCAN) { |
| 281 | wl->scan.state = WL1271_SCAN_STATE_DONE; |
| 282 | wl1271_scan_stm(wl, wlvif); |
| 283 | } |
| 284 | |
| 285 | break; |
| 286 | |
| 287 | case WL1271_SCAN_STATE_DONE: |
| 288 | wl->scan.failed = false; |
| 289 | cancel_delayed_work(&wl->scan_complete_work); |
| 290 | ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, |
| 291 | msecs_to_jiffies(0)); |
| 292 | break; |
| 293 | |
| 294 | default: |
| 295 | wl1271_error("invalid scan state"); |
| 296 | break; |
| 297 | } |
| 298 | |
| 299 | if (ret < 0) { |
| 300 | cancel_delayed_work(&wl->scan_complete_work); |
| 301 | ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, |
| 302 | msecs_to_jiffies(0)); |
| 303 | } |
| 304 | } |
| 305 | |
| 306 | static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, |
| 307 | struct wlcore_scan_channels *cmd_channels) |
| 308 | { |
| 309 | memcpy(cmd->passive, cmd_channels->passive, sizeof(cmd->passive)); |
| 310 | memcpy(cmd->active, cmd_channels->active, sizeof(cmd->active)); |
| 311 | cmd->dfs = cmd_channels->dfs; |
| 312 | cmd->n_pactive_ch = cmd_channels->passive_active; |
| 313 | |
| 314 | memcpy(cmd->channels_2, cmd_channels->channels_2, |
| 315 | sizeof(cmd->channels_2)); |
| 316 | memcpy(cmd->channels_5, cmd_channels->channels_5, |
| 317 | sizeof(cmd->channels_5)); |
| 318 | /* channels_4 are not supported, so no need to copy them */ |
| 319 | } |
| 320 | |
| 321 | int wl1271_scan_sched_scan_config(struct wl1271 *wl, |
| 322 | struct wl12xx_vif *wlvif, |
| 323 | struct cfg80211_sched_scan_request *req, |
| 324 | struct ieee80211_scan_ies *ies) |
| 325 | { |
| 326 | struct wl1271_cmd_sched_scan_config *cfg = NULL; |
| 327 | struct wlcore_scan_channels *cfg_channels = NULL; |
| 328 | struct conf_sched_scan_settings *c = &wl->conf.sched_scan; |
| 329 | int i, ret; |
| 330 | bool force_passive = !req->n_ssids; |
| 331 | |
| 332 | wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); |
| 333 | |
| 334 | cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); |
| 335 | if (!cfg) |
| 336 | return -ENOMEM; |
| 337 | |
| 338 | cfg->role_id = wlvif->role_id; |
| 339 | cfg->rssi_threshold = c->rssi_threshold; |
| 340 | cfg->snr_threshold = c->snr_threshold; |
| 341 | cfg->n_probe_reqs = c->num_probe_reqs; |
| 342 | /* cycles set to 0 it means infinite (until manually stopped) */ |
| 343 | cfg->cycles = 0; |
| 344 | /* report APs when at least 1 is found */ |
| 345 | cfg->report_after = 1; |
| 346 | /* don't stop scanning automatically when something is found */ |
| 347 | cfg->terminate = 0; |
| 348 | cfg->tag = WL1271_SCAN_DEFAULT_TAG; |
| 349 | /* don't filter on BSS type */ |
| 350 | cfg->bss_type = SCAN_BSS_TYPE_ANY; |
| 351 | /* currently NL80211 supports only a single interval */ |
| 352 | for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) |
| 353 | cfg->intervals[i] = cpu_to_le32(req->scan_plans[0].interval * |
| 354 | MSEC_PER_SEC); |
| 355 | |
| 356 | cfg->ssid_len = 0; |
| 357 | ret = wlcore_scan_sched_scan_ssid_list(wl, wlvif, req); |
| 358 | if (ret < 0) |
| 359 | goto out; |
| 360 | |
| 361 | cfg->filter_type = ret; |
| 362 | |
| 363 | wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); |
| 364 | |
| 365 | cfg_channels = kzalloc(sizeof(*cfg_channels), GFP_KERNEL); |
| 366 | if (!cfg_channels) { |
| 367 | ret = -ENOMEM; |
| 368 | goto out; |
| 369 | } |
| 370 | |
| 371 | if (!wlcore_set_scan_chan_params(wl, cfg_channels, req->channels, |
| 372 | req->n_channels, req->n_ssids, |
| 373 | SCAN_TYPE_PERIODIC)) { |
| 374 | wl1271_error("scan channel list is empty"); |
| 375 | ret = -EINVAL; |
| 376 | goto out; |
| 377 | } |
| 378 | wl12xx_adjust_channels(cfg, cfg_channels); |
| 379 | |
| 380 | if (!force_passive && cfg->active[0]) { |
| 381 | u8 band = IEEE80211_BAND_2GHZ; |
| 382 | ret = wl12xx_cmd_build_probe_req(wl, wlvif, |
| 383 | wlvif->role_id, band, |
| 384 | req->ssids[0].ssid, |
| 385 | req->ssids[0].ssid_len, |
| 386 | ies->ies[band], |
| 387 | ies->len[band], |
| 388 | ies->common_ies, |
| 389 | ies->common_ie_len, |
| 390 | true); |
| 391 | if (ret < 0) { |
| 392 | wl1271_error("2.4GHz PROBE request template failed"); |
| 393 | goto out; |
| 394 | } |
| 395 | } |
| 396 | |
| 397 | if (!force_passive && cfg->active[1]) { |
| 398 | u8 band = IEEE80211_BAND_5GHZ; |
| 399 | ret = wl12xx_cmd_build_probe_req(wl, wlvif, |
| 400 | wlvif->role_id, band, |
| 401 | req->ssids[0].ssid, |
| 402 | req->ssids[0].ssid_len, |
| 403 | ies->ies[band], |
| 404 | ies->len[band], |
| 405 | ies->common_ies, |
| 406 | ies->common_ie_len, |
| 407 | true); |
| 408 | if (ret < 0) { |
| 409 | wl1271_error("5GHz PROBE request template failed"); |
| 410 | goto out; |
| 411 | } |
| 412 | } |
| 413 | |
| 414 | wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); |
| 415 | |
| 416 | ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, |
| 417 | sizeof(*cfg), 0); |
| 418 | if (ret < 0) { |
| 419 | wl1271_error("SCAN configuration failed"); |
| 420 | goto out; |
| 421 | } |
| 422 | out: |
| 423 | kfree(cfg_channels); |
| 424 | kfree(cfg); |
| 425 | return ret; |
| 426 | } |
| 427 | |
| 428 | int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| 429 | { |
| 430 | struct wl1271_cmd_sched_scan_start *start; |
| 431 | int ret = 0; |
| 432 | |
| 433 | wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); |
| 434 | |
| 435 | if (wlvif->bss_type != BSS_TYPE_STA_BSS) |
| 436 | return -EOPNOTSUPP; |
| 437 | |
| 438 | if ((wl->quirks & WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN) && |
| 439 | test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags)) |
| 440 | return -EBUSY; |
| 441 | |
| 442 | start = kzalloc(sizeof(*start), GFP_KERNEL); |
| 443 | if (!start) |
| 444 | return -ENOMEM; |
| 445 | |
| 446 | start->role_id = wlvif->role_id; |
| 447 | start->tag = WL1271_SCAN_DEFAULT_TAG; |
| 448 | |
| 449 | ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, |
| 450 | sizeof(*start), 0); |
| 451 | if (ret < 0) { |
| 452 | wl1271_error("failed to send scan start command"); |
| 453 | goto out_free; |
| 454 | } |
| 455 | |
| 456 | out_free: |
| 457 | kfree(start); |
| 458 | return ret; |
| 459 | } |
| 460 | |
| 461 | int wl12xx_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| 462 | struct cfg80211_sched_scan_request *req, |
| 463 | struct ieee80211_scan_ies *ies) |
| 464 | { |
| 465 | int ret; |
| 466 | |
| 467 | ret = wl1271_scan_sched_scan_config(wl, wlvif, req, ies); |
| 468 | if (ret < 0) |
| 469 | return ret; |
| 470 | |
| 471 | return wl1271_scan_sched_scan_start(wl, wlvif); |
| 472 | } |
| 473 | |
| 474 | void wl12xx_scan_sched_scan_stop(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| 475 | { |
| 476 | struct wl1271_cmd_sched_scan_stop *stop; |
| 477 | int ret = 0; |
| 478 | |
| 479 | wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); |
| 480 | |
| 481 | /* FIXME: what to do if alloc'ing to stop fails? */ |
| 482 | stop = kzalloc(sizeof(*stop), GFP_KERNEL); |
| 483 | if (!stop) { |
| 484 | wl1271_error("failed to alloc memory to send sched scan stop"); |
| 485 | return; |
| 486 | } |
| 487 | |
| 488 | stop->role_id = wlvif->role_id; |
| 489 | stop->tag = WL1271_SCAN_DEFAULT_TAG; |
| 490 | |
| 491 | ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, |
| 492 | sizeof(*stop), 0); |
| 493 | if (ret < 0) { |
| 494 | wl1271_error("failed to send sched scan stop command"); |
| 495 | goto out_free; |
| 496 | } |
| 497 | |
| 498 | out_free: |
| 499 | kfree(stop); |
| 500 | } |
| 501 | |
| 502 | int wl12xx_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif, |
| 503 | struct cfg80211_scan_request *req) |
| 504 | { |
| 505 | wl1271_scan_stm(wl, wlvif); |
| 506 | return 0; |
| 507 | } |
| 508 | |
| 509 | void wl12xx_scan_completed(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| 510 | { |
| 511 | wl1271_scan_stm(wl, wlvif); |
| 512 | } |