| /* |
| * sfe_ipv4_udp.c |
| * Shortcut forwarding engine - IPv4 UDP implementation |
| * |
| * Copyright (c) 2013-2016, 2019-2020, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/skbuff.h> |
| #include <net/udp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/lockdep.h> |
| #include <linux/version.h> |
| |
| #include "sfe_debug.h" |
| #include "sfe_api.h" |
| #include "sfe.h" |
| #include "sfe_flow_cookie.h" |
| #include "sfe_ipv4.h" |
| #include "sfe_pppoe.h" |
| #include "sfe_vlan.h" |
| |
| /* |
| * sfe_ipv4_udp_sk_deliver() |
| * Deliver the packet to the protocol handler registered with Linux. |
| * To be called under rcu_read_lock() |
| * Returns: |
| * 1 if the packet needs to be passed to Linux. |
| * 0 if the packet is processed successfully. |
| * -1 if the packet is dropped in SFE. |
| */ |
| static int sfe_ipv4_udp_sk_deliver(struct sk_buff *skb, struct sfe_ipv4_connection_match *cm, unsigned int ihl) |
| { |
| struct udp_sock *up; |
| struct sock *sk; |
| int ret; |
| int (*encap_rcv)(struct sock *sk, struct sk_buff *skb); |
| |
| /* |
| * Call the decap handler for valid encap_rcv handler. |
| */ |
| up = rcu_dereference(cm->up); |
| encap_rcv = READ_ONCE(up->encap_rcv); |
| if (!encap_rcv) { |
| DEBUG_ERROR("%px: sfe: Error: up->encap_rcv is NULL\n", skb); |
| return 1; |
| } |
| |
| #if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 13, 0)) |
| nf_reset(skb); |
| #else |
| nf_reset_ct(skb); |
| #endif |
| |
| skb_pull(skb, ihl); |
| skb_reset_transport_header(skb); |
| |
| /* |
| * Verify checksum before giving to encap_rcv handler function. |
| * TODO: The following approach is ignorant for UDPLITE for now. |
| * Instead, consider calling Linux API to do checksum validation. |
| */ |
| if (unlikely(skb->ip_summed != CHECKSUM_UNNECESSARY) && unlikely(skb->ip_summed != CHECKSUM_COMPLETE)) { |
| skb->csum = inet_compute_pseudo(skb, IPPROTO_UDP); |
| if (unlikely(__skb_checksum_complete(skb))) { |
| DEBUG_ERROR("%px: sfe: Invalid udp checksum\n", skb); |
| kfree_skb(skb); |
| return -1; |
| } |
| DEBUG_TRACE("%px: sfe: udp checksum verified in s/w correctly.\n", skb); |
| } |
| |
| sk = (struct sock *)up; |
| |
| /* |
| * At this point, L4 checksum has already been verified and pkt is going |
| * to Linux's tunnel decap-handler. Setting ip_summed field to CHECKSUM_NONE, |
| * to ensure that later packet's inner header checksum is validated correctly. |
| * TODO: Find the fix to set skb->ip_summed = CHECKSUM_NONE; |
| */ |
| |
| /* |
| * encap_rcv() returns the following value: |
| * =0 if skb was successfully passed to the encap |
| * handler or was discarded by it. |
| * >0 if skb should be passed on to UDP. |
| * <0 if skb should be resubmitted as proto -N |
| */ |
| ret = encap_rcv(sk, skb); |
| if (unlikely(ret)) { |
| /* |
| * If encap_rcv fails, vxlan driver drops the packet. |
| * No need to free the skb here. |
| */ |
| |
| DEBUG_ERROR("%px: sfe: udp-decap API return error: %d\n", skb, ret); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * sfe_ipv4_recv_udp() |
| * Handle UDP packet receives and forwarding. |
| */ |
| int sfe_ipv4_recv_udp(struct sfe_ipv4 *si, struct sk_buff *skb, struct net_device *dev, |
| unsigned int len, struct iphdr *iph, unsigned int ihl, |
| bool sync_on_find, struct sfe_l2_info *l2_info, bool tun_outer) |
| { |
| struct udphdr *udph; |
| __be32 src_ip; |
| __be32 dest_ip; |
| __be16 src_port; |
| __be16 dest_port; |
| struct sfe_ipv4_connection_match *cm; |
| u8 ttl; |
| struct net_device *xmit_dev; |
| bool hw_csum; |
| int err; |
| bool bridge_flow; |
| int ret; |
| bool fast_xmit; |
| netdev_features_t features; |
| |
| /* |
| * Is our packet too short to contain a valid UDP header? |
| */ |
| if (unlikely(!pskb_may_pull(skb, (sizeof(struct udphdr) + ihl)))) { |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_UDP_HEADER_INCOMPLETE); |
| DEBUG_TRACE("%px: packet too short for UDP header\n", skb); |
| return 0; |
| } |
| |
| /* |
| * Read the IP address and port information. Read the IP header data first |
| * because we've almost certainly got that in the cache. We may not yet have |
| * the UDP header cached though so allow more time for any prefetching. |
| */ |
| src_ip = iph->saddr; |
| dest_ip = iph->daddr; |
| |
| udph = (struct udphdr *)(skb->data + ihl); |
| src_port = udph->source; |
| dest_port = udph->dest; |
| |
| rcu_read_lock(); |
| |
| /* |
| * Look for a connection match. |
| */ |
| #ifdef CONFIG_NF_FLOW_COOKIE |
| cm = si->sfe_flow_cookie_table[skb->flow_cookie & SFE_FLOW_COOKIE_MASK].match; |
| if (unlikely(!cm)) { |
| cm = sfe_ipv4_find_connection_match_rcu(si, dev, IPPROTO_UDP, src_ip, src_port, dest_ip, dest_port); |
| } |
| #else |
| /* |
| * 5-tuple lookup for UDP flow. |
| */ |
| cm = sfe_ipv4_find_connection_match_rcu(si, dev, IPPROTO_UDP, src_ip, src_port, dest_ip, dest_port); |
| #endif |
| if (unlikely(!cm)) { |
| |
| /* |
| * try a 4-tuple lookup; required for tunnels like vxlan. |
| */ |
| cm = sfe_ipv4_find_connection_match_rcu(si, dev, IPPROTO_UDP, src_ip, 0, dest_ip, dest_port); |
| if (unlikely(!cm)) { |
| rcu_read_unlock(); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_UDP_NO_CONNECTION); |
| DEBUG_TRACE("%px: sfe: no connection found in 4-tuple lookup.\n", skb); |
| return 0; |
| } |
| } |
| |
| /* |
| * Source interface validate. |
| */ |
| if (unlikely((cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_SRC_INTERFACE_CHECK) && (cm->match_dev != dev))) { |
| struct sfe_ipv4_connection *c = cm->connection; |
| spin_lock_bh(&si->lock); |
| ret = sfe_ipv4_remove_connection(si, c); |
| spin_unlock_bh(&si->lock); |
| |
| if (ret) { |
| sfe_ipv4_flush_connection(si, c, SFE_SYNC_REASON_FLUSH); |
| } |
| rcu_read_unlock(); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_INVALID_SRC_IFACE); |
| DEBUG_TRACE("flush on wrong source interface check failure\n"); |
| return 0; |
| } |
| |
| /* |
| * If our packet has beern marked as "flush on find" we can't actually |
| * forward it in the fast path, but now that we've found an associated |
| * connection we need sync its status before exception it to slow path. |
| */ |
| if (unlikely(sync_on_find)) { |
| sfe_ipv4_sync_status(si, cm->connection, SFE_SYNC_REASON_STATS); |
| rcu_read_unlock(); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_UDP_IP_OPTIONS_OR_INITIAL_FRAGMENT); |
| DEBUG_TRACE("%px: sfe: sync on find\n", cm); |
| return 0; |
| } |
| |
| #ifdef CONFIG_XFRM |
| /* |
| * We can't accelerate the flow on this direction, just let it go |
| * through the slow path. |
| */ |
| if (unlikely(!cm->flow_accel)) { |
| rcu_read_unlock(); |
| this_cpu_inc(si->stats_pcpu->packets_not_forwarded64); |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Do we expect an ingress VLAN tag for this flow? |
| */ |
| if (unlikely(!sfe_vlan_validate_ingress_tag(skb, cm->ingress_vlan_hdr_cnt, cm->ingress_vlan_hdr, l2_info))) { |
| rcu_read_unlock(); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_INGRESS_VLAN_TAG_MISMATCH); |
| DEBUG_TRACE("VLAN tag mismatch. skb=%px\n", skb); |
| return 0; |
| } |
| |
| bridge_flow = !!(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_BRIDGE_FLOW); |
| |
| /* |
| * Does our TTL allow forwarding? |
| */ |
| if (likely(!bridge_flow)) { |
| ttl = iph->ttl; |
| if (unlikely(ttl < 2)) { |
| sfe_ipv4_sync_status(si, cm->connection, SFE_SYNC_REASON_STATS); |
| rcu_read_unlock(); |
| |
| DEBUG_TRACE("%px: sfe: TTL too low\n", skb); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_UDP_SMALL_TTL); |
| return 0; |
| } |
| } |
| |
| /* |
| * If our packet is larger than the MTU of the transmit interface then |
| * we can't forward it easily. |
| */ |
| if (unlikely(len > cm->xmit_dev_mtu)) { |
| sfe_ipv4_sync_status(si, cm->connection, SFE_SYNC_REASON_STATS); |
| rcu_read_unlock(); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_UDP_NEEDS_FRAGMENTATION); |
| DEBUG_TRACE("%px: sfe: larger than MTU\n", cm); |
| return 0; |
| } |
| |
| /* |
| * Check if skb was cloned. If it was, unshare it. Because |
| * the data area is going to be written in this path and we don't want to |
| * change the cloned skb's data section. |
| */ |
| if (unlikely(skb_cloned(skb))) { |
| DEBUG_TRACE("%px: skb is a cloned skb\n", skb); |
| skb = skb_unshare(skb, GFP_ATOMIC); |
| if (!skb) { |
| DEBUG_WARN("%px: Failed to unshare the cloned skb\n", skb); |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| /* |
| * Update the iph and udph pointers with the unshared skb's data area. |
| */ |
| iph = (struct iphdr *)skb->data; |
| udph = (struct udphdr *)(skb->data + ihl); |
| } |
| |
| /* |
| * For PPPoE packets, match server MAC and session id |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_PPPOE_DECAP)) { |
| struct pppoe_hdr *ph; |
| struct ethhdr *eth; |
| |
| if (unlikely(!sfe_l2_parse_flag_check(l2_info, SFE_L2_PARSE_FLAGS_PPPOE_INGRESS))) { |
| rcu_read_unlock(); |
| DEBUG_TRACE("%px: PPPoE header not present in packet for PPPoE rule\n", skb); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_INCORRECT_PPPOE_PARSING); |
| return 0; |
| } |
| |
| ph = (struct pppoe_hdr *)(skb->head + sfe_l2_pppoe_hdr_offset_get(l2_info)); |
| eth = (struct ethhdr *)(skb->head + sfe_l2_hdr_offset_get(l2_info)); |
| if (unlikely(cm->pppoe_session_id != ntohs(ph->sid)) || unlikely(!(ether_addr_equal((u8*)cm->pppoe_remote_mac, (u8 *)eth->h_source)))) { |
| DEBUG_TRACE("%px: PPPoE sessions with session IDs %d and %d or server MACs %pM and %pM did not match\n", |
| skb, cm->pppoe_session_id, htons(ph->sid), cm->pppoe_remote_mac, eth->h_source); |
| rcu_read_unlock(); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_INVALID_PPPOE_SESSION); |
| return 0; |
| } |
| skb->protocol = htons(l2_info->protocol); |
| this_cpu_inc(si->stats_pcpu->pppoe_decap_packets_forwarded64); |
| |
| } else if (unlikely(sfe_l2_parse_flag_check(l2_info, SFE_L2_PARSE_FLAGS_PPPOE_INGRESS))) { |
| |
| /* |
| * If packet contains PPPoE header but CME doesn't contain PPPoE flag yet we are exceptioning the packet to linux |
| */ |
| if (unlikely(!(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_BRIDGE_FLOW))) { |
| rcu_read_unlock(); |
| DEBUG_TRACE("%px: CME doesn't contain PPPoE flag but packet has PPPoE header\n", skb); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_PPPOE_NOT_SET_IN_CME); |
| return 0; |
| |
| } |
| |
| /* |
| * For bridged flows when packet contains PPPoE header, restore the header back and forward to xmit interface |
| */ |
| __skb_push(skb, (sizeof(struct pppoe_hdr) + sizeof(struct sfe_ppp_hdr))); |
| l2_info->l2_hdr_size -= (sizeof(struct pppoe_hdr) + sizeof(struct sfe_ppp_hdr)); |
| this_cpu_inc(si->stats_pcpu->pppoe_bridge_packets_forwarded64); |
| } |
| |
| /* |
| * Check if skb has enough headroom to write L2 headers |
| */ |
| if (unlikely(skb_headroom(skb) < cm->l2_hdr_size)) { |
| rcu_read_unlock(); |
| DEBUG_WARN("%px: Not enough headroom: %u\n", skb, skb_headroom(skb)); |
| sfe_ipv4_exception_stats_inc(si, SFE_IPV4_EXCEPTION_EVENT_NO_HEADROOM); |
| return 0; |
| } |
| |
| /* |
| * From this point on we're good to modify the packet. |
| */ |
| |
| /* |
| * For PPPoE flows, add PPPoE header before L2 header is added. |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_PPPOE_ENCAP)) { |
| sfe_pppoe_add_header(skb, cm->pppoe_session_id, PPP_IP); |
| this_cpu_inc(si->stats_pcpu->pppoe_encap_packets_forwarded64); |
| } |
| |
| /* |
| * Enable HW csum if rx checksum is verified and xmit interface is CSUM offload capable. |
| * Note: If L4 csum at Rx was found to be incorrect, we (router) should use incremental L4 checksum here |
| * so that HW does not re-calculate/replace the L4 csum |
| */ |
| hw_csum = !!(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_CSUM_OFFLOAD) && (skb->ip_summed == CHECKSUM_UNNECESSARY); |
| |
| /* |
| * Do we have to perform translations of the source address/port? |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_XLATE_SRC)) { |
| u16 udp_csum; |
| |
| iph->saddr = cm->xlate_src_ip; |
| udph->source = cm->xlate_src_port; |
| |
| /* |
| * Do we have a non-zero UDP checksum? If we do then we need |
| * to update it. |
| */ |
| if (unlikely(!hw_csum)) { |
| udp_csum = udph->check; |
| if (likely(udp_csum)) { |
| u32 sum; |
| |
| if (unlikely(skb->ip_summed == CHECKSUM_PARTIAL)) { |
| sum = udp_csum + cm->xlate_src_partial_csum_adjustment; |
| } else { |
| sum = udp_csum + cm->xlate_src_csum_adjustment; |
| } |
| |
| sum = (sum & 0xffff) + (sum >> 16); |
| udph->check = (u16)sum; |
| } |
| } |
| } |
| |
| /* |
| * Do we have to perform translations of the destination address/port? |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_XLATE_DEST)) { |
| u16 udp_csum; |
| |
| iph->daddr = cm->xlate_dest_ip; |
| udph->dest = cm->xlate_dest_port; |
| |
| /* |
| * Do we have a non-zero UDP checksum? If we do then we need |
| * to update it. |
| */ |
| if (unlikely(!hw_csum)) { |
| udp_csum = udph->check; |
| if (likely(udp_csum)) { |
| u32 sum; |
| |
| /* |
| * TODO: Use a common API for below incremental checksum calculation |
| * for IPv4/IPv6 UDP/TCP |
| */ |
| if (unlikely(skb->ip_summed == CHECKSUM_PARTIAL)) { |
| sum = udp_csum + cm->xlate_dest_partial_csum_adjustment; |
| } else { |
| sum = udp_csum + cm->xlate_dest_csum_adjustment; |
| } |
| |
| sum = (sum & 0xffff) + (sum >> 16); |
| udph->check = (u16)sum; |
| } |
| } |
| } |
| |
| /* |
| * UDP sock will be valid only in decap-path. |
| * Call encap_rcv function associated with udp_sock in cm. |
| */ |
| if (unlikely(cm->up)) { |
| /* |
| * Call decap handler associated with sock. |
| * Also validates UDP checksum before calling decap handler. |
| */ |
| err = sfe_ipv4_udp_sk_deliver(skb, cm, ihl); |
| if (unlikely(err == -1)) { |
| rcu_read_unlock(); |
| this_cpu_inc(si->stats_pcpu->packets_dropped64); |
| return 1; |
| } else if (unlikely(err == 1)) { |
| rcu_read_unlock(); |
| this_cpu_inc(si->stats_pcpu->packets_not_forwarded64); |
| return 0; |
| } |
| |
| /* |
| * Update traffic stats. |
| */ |
| atomic_inc(&cm->rx_packet_count); |
| atomic_add(len, &cm->rx_byte_count); |
| |
| rcu_read_unlock(); |
| this_cpu_inc(si->stats_pcpu->packets_forwarded64); |
| DEBUG_TRACE("%px: sfe: sfe_ipv4_recv_udp -> encap_rcv done.\n", skb); |
| return 1; |
| } |
| |
| /* |
| * Decrement our TTL |
| * Except when called from hook function in post-decap. |
| */ |
| if (likely(!bridge_flow)) { |
| iph->ttl -= (u8)(!tun_outer); |
| } |
| |
| /* |
| * Update DSCP |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_DSCP_REMARK)) { |
| iph->tos = (iph->tos & SFE_IPV4_DSCP_MASK) | cm->dscp; |
| } |
| |
| /* |
| * If HW checksum offload is not possible, full L3 checksum and incremental L4 checksum |
| * are used to update the packet. Setting ip_summed to CHECKSUM_UNNECESSARY ensures checksum is |
| * not recalculated further in packet path. |
| */ |
| if (likely(hw_csum)) { |
| skb->ip_summed = CHECKSUM_PARTIAL; |
| } else { |
| iph->check = sfe_ipv4_gen_ip_csum(iph); |
| } |
| |
| /* |
| * Update traffic stats. |
| */ |
| atomic_inc(&cm->rx_packet_count); |
| atomic_add(len, &cm->rx_byte_count); |
| |
| xmit_dev = cm->xmit_dev; |
| skb->dev = xmit_dev; |
| |
| /* |
| * Check to see if we need to add VLAN tags |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_INSERT_EGRESS_VLAN_TAG)) { |
| sfe_vlan_add_tag(skb, cm->egress_vlan_hdr_cnt, cm->egress_vlan_hdr); |
| } |
| |
| /* |
| * Check to see if we need to write an Ethernet header. |
| */ |
| if (likely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_WRITE_L2_HDR)) { |
| if (unlikely(!(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_WRITE_FAST_ETH_HDR))) { |
| dev_hard_header(skb, xmit_dev, ntohs(skb->protocol), |
| cm->xmit_dest_mac, cm->xmit_src_mac, len); |
| } else { |
| /* |
| * For the simple case we write this really fast. |
| */ |
| struct ethhdr *eth = (struct ethhdr *)__skb_push(skb, ETH_HLEN); |
| eth->h_proto = skb->protocol; |
| ether_addr_copy((u8 *)eth->h_dest, (u8 *)cm->xmit_dest_mac); |
| ether_addr_copy((u8 *)eth->h_source, (u8 *)cm->xmit_src_mac); |
| } |
| } |
| |
| /* |
| * Update priority of skb. |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_PRIORITY_REMARK)) { |
| skb->priority = cm->priority; |
| } |
| |
| /* |
| * Mark outgoing packet. |
| */ |
| if (unlikely(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_MARK)) { |
| skb->mark = cm->connection->mark; |
| } |
| |
| /* |
| * For the first packets, check if it could got fast xmit. |
| */ |
| if (unlikely(!(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_FAST_XMIT_FLOW_CHECKED) |
| && (cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_FAST_XMIT_DEV_ADMISSION))){ |
| cm->features = netif_skb_features(skb); |
| if (likely(sfe_fast_xmit_check(skb, cm->features))) { |
| cm->flags |= SFE_IPV4_CONNECTION_MATCH_FLAG_FAST_XMIT; |
| } |
| cm->flags |= SFE_IPV4_CONNECTION_MATCH_FLAG_FAST_XMIT_FLOW_CHECKED; |
| } |
| features = cm->features; |
| |
| fast_xmit = !!(cm->flags & SFE_IPV4_CONNECTION_MATCH_FLAG_FAST_XMIT); |
| |
| rcu_read_unlock(); |
| |
| this_cpu_inc(si->stats_pcpu->packets_forwarded64); |
| |
| /* |
| * We're going to check for GSO flags when we transmit the packet so |
| * start fetching the necessary cache line now. |
| */ |
| prefetch(skb_shinfo(skb)); |
| |
| /* |
| * We do per packet condition check before we could fast xmit the |
| * packet. |
| */ |
| if (likely(fast_xmit && dev_fast_xmit(skb, xmit_dev, features))) { |
| this_cpu_inc(si->stats_pcpu->packets_fast_xmited64); |
| return 1; |
| } |
| |
| /* |
| * Mark that this packet has been fast forwarded. |
| */ |
| skb->fast_forwarded = 1; |
| |
| /* |
| * Send the packet on its way. |
| */ |
| dev_queue_xmit(skb); |
| |
| return 1; |
| } |