| /* |
| * Copyright 1994, 1995, 2000 Neil Russell. |
| * (See License) |
| * Copyright 2000, 2001 DENX Software Engineering, Wolfgang Denk, wd@denx.de |
| * Copyright 2011 Comelit Group SpA, |
| * Luca Ceresoli <luca.ceresoli@comelit.it> |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <mapmem.h> |
| #include <net.h> |
| #include "tftp.h" |
| #include "bootp.h" |
| #ifdef CONFIG_SYS_DIRECT_FLASH_TFTP |
| #include <flash.h> |
| #endif |
| |
| /* Well known TFTP port # */ |
| #define WELL_KNOWN_PORT 69 |
| /* Millisecs to timeout for lost pkt */ |
| #define TIMEOUT 5000UL |
| #ifndef CONFIG_NET_RETRY_COUNT |
| /* # of timeouts before giving up */ |
| # define TIMEOUT_COUNT 10 |
| #else |
| # define TIMEOUT_COUNT (CONFIG_NET_RETRY_COUNT * 2) |
| #endif |
| /* Number of "loading" hashes per line (for checking the image size) */ |
| #define HASHES_PER_LINE 65 |
| |
| /* |
| * TFTP operations. |
| */ |
| #define TFTP_RRQ 1 |
| #define TFTP_WRQ 2 |
| #define TFTP_DATA 3 |
| #define TFTP_ACK 4 |
| #define TFTP_ERROR 5 |
| #define TFTP_OACK 6 |
| |
| static ulong TftpTimeoutMSecs = TIMEOUT; |
| static int TftpTimeoutCountMax = TIMEOUT_COUNT; |
| static ulong time_start; /* Record time we started tftp */ |
| |
| /* |
| * These globals govern the timeout behavior when attempting a connection to a |
| * TFTP server. TftpRRQTimeoutMSecs specifies the number of milliseconds to |
| * wait for the server to respond to initial connection. Second global, |
| * TftpRRQTimeoutCountMax, gives the number of such connection retries. |
| * TftpRRQTimeoutCountMax must be non-negative and TftpRRQTimeoutMSecs must be |
| * positive. The globals are meant to be set (and restored) by code needing |
| * non-standard timeout behavior when initiating a TFTP transfer. |
| */ |
| ulong TftpRRQTimeoutMSecs = TIMEOUT; |
| int TftpRRQTimeoutCountMax = TIMEOUT_COUNT; |
| |
| enum { |
| TFTP_ERR_UNDEFINED = 0, |
| TFTP_ERR_FILE_NOT_FOUND = 1, |
| TFTP_ERR_ACCESS_DENIED = 2, |
| TFTP_ERR_DISK_FULL = 3, |
| TFTP_ERR_UNEXPECTED_OPCODE = 4, |
| TFTP_ERR_UNKNOWN_TRANSFER_ID = 5, |
| TFTP_ERR_FILE_ALREADY_EXISTS = 6, |
| }; |
| |
| static struct in_addr tftp_remote_ip; |
| /* The UDP port at their end */ |
| static int TftpRemotePort; |
| /* The UDP port at our end */ |
| static int TftpOurPort; |
| static int TftpTimeoutCount; |
| /* packet sequence number */ |
| static ulong TftpBlock; |
| /* last packet sequence number received */ |
| static ulong TftpLastBlock; |
| /* count of sequence number wraparounds */ |
| static ulong TftpBlockWrap; |
| /* memory offset due to wrapping */ |
| static ulong TftpBlockWrapOffset; |
| static int TftpState; |
| #ifdef CONFIG_TFTP_TSIZE |
| /* The file size reported by the server */ |
| static int TftpTsize; |
| /* The number of hashes we printed */ |
| static short TftpNumchars; |
| #endif |
| #ifdef CONFIG_CMD_TFTPPUT |
| static int TftpWriting; /* 1 if writing, else 0 */ |
| static int TftpFinalBlock; /* 1 if we have sent the last block */ |
| #else |
| #define TftpWriting 0 |
| #endif |
| |
| #define STATE_SEND_RRQ 1 |
| #define STATE_DATA 2 |
| #define STATE_TOO_LARGE 3 |
| #define STATE_BAD_MAGIC 4 |
| #define STATE_OACK 5 |
| #define STATE_RECV_WRQ 6 |
| #define STATE_SEND_WRQ 7 |
| |
| /* default TFTP block size */ |
| #define TFTP_BLOCK_SIZE 512 |
| /* sequence number is 16 bit */ |
| #define TFTP_SEQUENCE_SIZE ((ulong)(1<<16)) |
| |
| #define DEFAULT_NAME_LEN (8 + 4 + 1) |
| static char default_filename[DEFAULT_NAME_LEN]; |
| |
| #ifndef CONFIG_TFTP_FILE_NAME_MAX_LEN |
| #define MAX_LEN 128 |
| #else |
| #define MAX_LEN CONFIG_TFTP_FILE_NAME_MAX_LEN |
| #endif |
| |
| static char tftp_filename[MAX_LEN]; |
| |
| /* 512 is poor choice for ethernet, MTU is typically 1500. |
| * Minus eth.hdrs thats 1468. Can get 2x better throughput with |
| * almost-MTU block sizes. At least try... fall back to 512 if need be. |
| * (but those using CONFIG_IP_DEFRAG may want to set a larger block in cfg file) |
| */ |
| #ifdef CONFIG_TFTP_BLOCKSIZE |
| #define TFTP_MTU_BLOCKSIZE CONFIG_TFTP_BLOCKSIZE |
| #else |
| #define TFTP_MTU_BLOCKSIZE 1468 |
| #endif |
| |
| static unsigned short TftpBlkSize = TFTP_BLOCK_SIZE; |
| static unsigned short TftpBlkSizeOption = TFTP_MTU_BLOCKSIZE; |
| |
| #ifdef CONFIG_MCAST_TFTP |
| #include <malloc.h> |
| #define MTFTP_BITMAPSIZE 0x1000 |
| static unsigned *Bitmap; |
| static int PrevBitmapHole, Mapsize = MTFTP_BITMAPSIZE; |
| static uchar ProhibitMcast, MasterClient; |
| static uchar Multicast; |
| static int Mcast_port; |
| static ulong TftpEndingBlock; /* can get 'last' block before done..*/ |
| |
| static void parse_multicast_oack(char *pkt, int len); |
| |
| static void |
| mcast_cleanup(void) |
| { |
| if (net_mcast_addr) |
| eth_mcast_join(net_mcast_addr, 0); |
| if (Bitmap) |
| free(Bitmap); |
| Bitmap = NULL; |
| net_mcast_addr.s_addr = 0; |
| Multicast = 0; |
| Mcast_port = 0; |
| TftpEndingBlock = -1; |
| } |
| |
| #endif /* CONFIG_MCAST_TFTP */ |
| |
| static inline void |
| store_block(int block, uchar *src, unsigned len) |
| { |
| ulong offset = block * TftpBlkSize + TftpBlockWrapOffset; |
| ulong newsize = offset + len; |
| #ifdef CONFIG_SYS_DIRECT_FLASH_TFTP |
| int i, rc = 0; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
| /* start address in flash? */ |
| if (flash_info[i].flash_id == FLASH_UNKNOWN) |
| continue; |
| if (load_addr + offset >= flash_info[i].start[0]) { |
| rc = 1; |
| break; |
| } |
| } |
| |
| if (rc) { /* Flash is destination for this packet */ |
| rc = flash_write((char *)src, (ulong)(load_addr+offset), len); |
| if (rc) { |
| flash_perror(rc); |
| net_set_state(NETLOOP_FAIL); |
| return; |
| } |
| } else |
| #endif /* CONFIG_SYS_DIRECT_FLASH_TFTP */ |
| { |
| void *ptr = map_sysmem(load_addr + offset, len); |
| |
| memcpy(ptr, src, len); |
| unmap_sysmem(ptr); |
| } |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast) |
| ext2_set_bit(block, Bitmap); |
| #endif |
| |
| if (net_boot_file_size < newsize) |
| net_boot_file_size = newsize; |
| } |
| |
| /* Clear our state ready for a new transfer */ |
| static void new_transfer(void) |
| { |
| TftpLastBlock = 0; |
| TftpBlockWrap = 0; |
| TftpBlockWrapOffset = 0; |
| #ifdef CONFIG_CMD_TFTPPUT |
| TftpFinalBlock = 0; |
| #endif |
| } |
| |
| #ifdef CONFIG_CMD_TFTPPUT |
| /** |
| * Load the next block from memory to be sent over tftp. |
| * |
| * @param block Block number to send |
| * @param dst Destination buffer for data |
| * @param len Number of bytes in block (this one and every other) |
| * @return number of bytes loaded |
| */ |
| static int load_block(unsigned block, uchar *dst, unsigned len) |
| { |
| /* We may want to get the final block from the previous set */ |
| ulong offset = ((int)block - 1) * len + TftpBlockWrapOffset; |
| ulong tosend = len; |
| |
| tosend = min(net_boot_file_size - offset, tosend); |
| (void)memcpy(dst, (void *)(save_addr + offset), tosend); |
| debug("%s: block=%d, offset=%ld, len=%d, tosend=%ld\n", __func__, |
| block, offset, len, tosend); |
| return tosend; |
| } |
| #endif |
| |
| static void TftpSend(void); |
| static void TftpTimeout(void); |
| |
| /**********************************************************************/ |
| |
| static void show_block_marker(void) |
| { |
| #ifdef CONFIG_TFTP_TSIZE |
| if (TftpTsize) { |
| ulong pos = TftpBlock * TftpBlkSize + TftpBlockWrapOffset; |
| |
| while (TftpNumchars < pos * 50 / TftpTsize) { |
| putc('#'); |
| TftpNumchars++; |
| } |
| } else |
| #endif |
| { |
| if (((TftpBlock - 1) % 10) == 0) |
| putc('#'); |
| else if ((TftpBlock % (10 * HASHES_PER_LINE)) == 0) |
| puts("\n\t "); |
| } |
| } |
| |
| /** |
| * restart the current transfer due to an error |
| * |
| * @param msg Message to print for user |
| */ |
| static void restart(const char *msg) |
| { |
| printf("\n%s; starting again\n", msg); |
| #ifdef CONFIG_MCAST_TFTP |
| mcast_cleanup(); |
| #endif |
| NetStartAgain(); |
| } |
| |
| /* |
| * Check if the block number has wrapped, and update progress |
| * |
| * TODO: The egregious use of global variables in this file should be tidied. |
| */ |
| static void update_block_number(void) |
| { |
| /* |
| * RFC1350 specifies that the first data packet will |
| * have sequence number 1. If we receive a sequence |
| * number of 0 this means that there was a wrap |
| * around of the (16 bit) counter. |
| */ |
| if (TftpBlock == 0 && TftpLastBlock != 0) { |
| TftpBlockWrap++; |
| TftpBlockWrapOffset += TftpBlkSize * TFTP_SEQUENCE_SIZE; |
| TftpTimeoutCount = 0; /* we've done well, reset thhe timeout */ |
| } else { |
| show_block_marker(); |
| } |
| } |
| |
| /* The TFTP get or put is complete */ |
| static void tftp_complete(void) |
| { |
| #ifdef CONFIG_TFTP_TSIZE |
| /* Print hash marks for the last packet received */ |
| while (TftpTsize && TftpNumchars < 49) { |
| putc('#'); |
| TftpNumchars++; |
| } |
| puts(" "); |
| print_size(TftpTsize, ""); |
| #endif |
| time_start = get_timer(time_start); |
| if (time_start > 0) { |
| puts("\n\t "); /* Line up with "Loading: " */ |
| print_size(net_boot_file_size / |
| time_start * 1000, "/s"); |
| } |
| puts("\ndone\n"); |
| net_set_state(NETLOOP_SUCCESS); |
| } |
| |
| static void |
| TftpSend(void) |
| { |
| uchar *pkt; |
| uchar *xp; |
| int len = 0; |
| ushort *s; |
| |
| #ifdef CONFIG_MCAST_TFTP |
| /* Multicast TFTP.. non-MasterClients do not ACK data. */ |
| if (Multicast |
| && (TftpState == STATE_DATA) |
| && (MasterClient == 0)) |
| return; |
| #endif |
| /* |
| * We will always be sending some sort of packet, so |
| * cobble together the packet headers now. |
| */ |
| pkt = NetTxPacket + NetEthHdrSize() + IP_UDP_HDR_SIZE; |
| |
| switch (TftpState) { |
| case STATE_SEND_RRQ: |
| case STATE_SEND_WRQ: |
| xp = pkt; |
| s = (ushort *)pkt; |
| #ifdef CONFIG_CMD_TFTPPUT |
| *s++ = htons(TftpState == STATE_SEND_RRQ ? TFTP_RRQ : |
| TFTP_WRQ); |
| #else |
| *s++ = htons(TFTP_RRQ); |
| #endif |
| pkt = (uchar *)s; |
| strcpy((char *)pkt, tftp_filename); |
| pkt += strlen(tftp_filename) + 1; |
| strcpy((char *)pkt, "octet"); |
| pkt += 5 /*strlen("octet")*/ + 1; |
| strcpy((char *)pkt, "timeout"); |
| pkt += 7 /*strlen("timeout")*/ + 1; |
| sprintf((char *)pkt, "%lu", TftpTimeoutMSecs / 1000); |
| debug("send option \"timeout %s\"\n", (char *)pkt); |
| pkt += strlen((char *)pkt) + 1; |
| #ifdef CONFIG_TFTP_TSIZE |
| pkt += sprintf((char *)pkt, "tsize%c%u%c", |
| 0, net_boot_file_size, 0); |
| #endif |
| /* try for more effic. blk size */ |
| pkt += sprintf((char *)pkt, "blksize%c%d%c", |
| 0, TftpBlkSizeOption, 0); |
| #ifdef CONFIG_MCAST_TFTP |
| /* Check all preconditions before even trying the option */ |
| if (!ProhibitMcast) { |
| Bitmap = malloc(Mapsize); |
| if (Bitmap && eth_get_dev()->mcast) { |
| free(Bitmap); |
| Bitmap = NULL; |
| pkt += sprintf((char *)pkt, "multicast%c%c", |
| 0, 0); |
| } |
| } |
| #endif /* CONFIG_MCAST_TFTP */ |
| len = pkt - xp; |
| break; |
| |
| case STATE_OACK: |
| #ifdef CONFIG_MCAST_TFTP |
| /* My turn! Start at where I need blocks I missed.*/ |
| if (Multicast) |
| TftpBlock = ext2_find_next_zero_bit(Bitmap, |
| (Mapsize*8), 0); |
| /*..falling..*/ |
| #endif |
| |
| case STATE_RECV_WRQ: |
| case STATE_DATA: |
| xp = pkt; |
| s = (ushort *)pkt; |
| s[0] = htons(TFTP_ACK); |
| s[1] = htons(TftpBlock); |
| pkt = (uchar *)(s + 2); |
| #ifdef CONFIG_CMD_TFTPPUT |
| if (TftpWriting) { |
| int toload = TftpBlkSize; |
| int loaded = load_block(TftpBlock, pkt, toload); |
| |
| s[0] = htons(TFTP_DATA); |
| pkt += loaded; |
| TftpFinalBlock = (loaded < toload); |
| } |
| #endif |
| len = pkt - xp; |
| break; |
| |
| case STATE_TOO_LARGE: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ERROR); |
| *s++ = htons(3); |
| |
| pkt = (uchar *)s; |
| strcpy((char *)pkt, "File too large"); |
| pkt += 14 /*strlen("File too large")*/ + 1; |
| len = pkt - xp; |
| break; |
| |
| case STATE_BAD_MAGIC: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ERROR); |
| *s++ = htons(2); |
| pkt = (uchar *)s; |
| strcpy((char *)pkt, "File has bad magic"); |
| pkt += 18 /*strlen("File has bad magic")*/ + 1; |
| len = pkt - xp; |
| break; |
| } |
| |
| NetSendUDPPacket(net_server_ethaddr, tftp_remote_ip, TftpRemotePort, |
| TftpOurPort, len); |
| } |
| |
| #ifdef CONFIG_CMD_TFTPPUT |
| static void icmp_handler(unsigned type, unsigned code, unsigned dest, |
| struct in_addr sip, unsigned src, uchar *pkt, |
| unsigned len) |
| { |
| if (type == ICMP_NOT_REACH && code == ICMP_NOT_REACH_PORT) { |
| /* Oh dear the other end has gone away */ |
| restart("TFTP server died"); |
| } |
| } |
| #endif |
| |
| static void tftp_handler(uchar *pkt, unsigned dest, struct in_addr sip, |
| unsigned src, unsigned len) |
| { |
| __be16 proto; |
| __be16 *s; |
| int i; |
| |
| if (dest != TftpOurPort) { |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast |
| && (!Mcast_port || (dest != Mcast_port))) |
| #endif |
| return; |
| } |
| if (TftpState != STATE_SEND_RRQ && src != TftpRemotePort && |
| TftpState != STATE_RECV_WRQ && TftpState != STATE_SEND_WRQ) |
| return; |
| |
| if (len < 2) |
| return; |
| len -= 2; |
| /* warning: don't use increment (++) in ntohs() macros!! */ |
| s = (__be16 *)pkt; |
| proto = *s++; |
| pkt = (uchar *)s; |
| switch (ntohs(proto)) { |
| |
| case TFTP_RRQ: |
| break; |
| |
| case TFTP_ACK: |
| #ifdef CONFIG_CMD_TFTPPUT |
| if (TftpWriting) { |
| if (TftpFinalBlock) { |
| tftp_complete(); |
| } else { |
| /* |
| * Move to the next block. We want our block |
| * count to wrap just like the other end! |
| */ |
| int block = ntohs(*s); |
| int ack_ok = (TftpBlock == block); |
| |
| TftpBlock = (unsigned short)(block + 1); |
| update_block_number(); |
| if (ack_ok) |
| TftpSend(); /* Send next data block */ |
| } |
| } |
| #endif |
| break; |
| |
| default: |
| break; |
| |
| #ifdef CONFIG_CMD_TFTPSRV |
| case TFTP_WRQ: |
| debug("Got WRQ\n"); |
| tftp_remote_ip = sip; |
| TftpRemotePort = src; |
| TftpOurPort = 1024 + (get_timer(0) % 3072); |
| new_transfer(); |
| TftpSend(); /* Send ACK(0) */ |
| break; |
| #endif |
| |
| case TFTP_OACK: |
| debug("Got OACK: %s %s\n", |
| pkt, |
| pkt + strlen((char *)pkt) + 1); |
| TftpState = STATE_OACK; |
| TftpRemotePort = src; |
| /* |
| * Check for 'blksize' option. |
| * Careful: "i" is signed, "len" is unsigned, thus |
| * something like "len-8" may give a *huge* number |
| */ |
| for (i = 0; i+8 < len; i++) { |
| if (strcmp((char *)pkt+i, "blksize") == 0) { |
| TftpBlkSize = (unsigned short) |
| simple_strtoul((char *)pkt+i+8, NULL, |
| 10); |
| debug("Blocksize ack: %s, %d\n", |
| (char *)pkt+i+8, TftpBlkSize); |
| } |
| #ifdef CONFIG_TFTP_TSIZE |
| if (strcmp((char *)pkt+i, "tsize") == 0) { |
| TftpTsize = simple_strtoul((char *)pkt+i+6, |
| NULL, 10); |
| debug("size = %s, %d\n", |
| (char *)pkt+i+6, TftpTsize); |
| } |
| #endif |
| } |
| #ifdef CONFIG_MCAST_TFTP |
| parse_multicast_oack((char *)pkt, len-1); |
| if ((Multicast) && (!MasterClient)) |
| TftpState = STATE_DATA; /* passive.. */ |
| else |
| #endif |
| #ifdef CONFIG_CMD_TFTPPUT |
| if (TftpWriting) { |
| /* Get ready to send the first block */ |
| TftpState = STATE_DATA; |
| TftpBlock++; |
| } |
| #endif |
| TftpSend(); /* Send ACK or first data block */ |
| break; |
| case TFTP_DATA: |
| if (len < 2) |
| return; |
| len -= 2; |
| TftpBlock = ntohs(*(__be16 *)pkt); |
| |
| update_block_number(); |
| |
| if (TftpState == STATE_SEND_RRQ) |
| debug("Server did not acknowledge timeout option!\n"); |
| |
| if (TftpState == STATE_SEND_RRQ || TftpState == STATE_OACK || |
| TftpState == STATE_RECV_WRQ) { |
| /* first block received */ |
| TftpState = STATE_DATA; |
| TftpRemotePort = src; |
| new_transfer(); |
| |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast) { /* start!=1 common if mcast */ |
| TftpLastBlock = TftpBlock - 1; |
| } else |
| #endif |
| if (TftpBlock != 1) { /* Assertion */ |
| printf("\nTFTP error: " |
| "First block is not block 1 (%ld)\n" |
| "Starting again\n\n", |
| TftpBlock); |
| NetStartAgain(); |
| break; |
| } |
| } |
| |
| if (TftpBlock == TftpLastBlock) { |
| /* |
| * Same block again; ignore it. |
| */ |
| break; |
| } |
| |
| TftpLastBlock = TftpBlock; |
| TftpTimeoutCountMax = TIMEOUT_COUNT; |
| NetSetTimeout(TftpTimeoutMSecs, TftpTimeout); |
| |
| store_block(TftpBlock - 1, pkt + 2, len); |
| |
| /* |
| * Acknowledge the block just received, which will prompt |
| * the remote for the next one. |
| */ |
| #ifdef CONFIG_MCAST_TFTP |
| /* if I am the MasterClient, actively calculate what my next |
| * needed block is; else I'm passive; not ACKING |
| */ |
| if (Multicast) { |
| if (len < TftpBlkSize) { |
| TftpEndingBlock = TftpBlock; |
| } else if (MasterClient) { |
| TftpBlock = PrevBitmapHole = |
| ext2_find_next_zero_bit( |
| Bitmap, |
| (Mapsize*8), |
| PrevBitmapHole); |
| if (TftpBlock > ((Mapsize*8) - 1)) { |
| printf("tftpfile too big\n"); |
| /* try to double it and retry */ |
| Mapsize <<= 1; |
| mcast_cleanup(); |
| NetStartAgain(); |
| return; |
| } |
| TftpLastBlock = TftpBlock; |
| } |
| } |
| #endif |
| TftpSend(); |
| |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast) { |
| if (MasterClient && (TftpBlock >= TftpEndingBlock)) { |
| puts("\nMulticast tftp done\n"); |
| mcast_cleanup(); |
| net_set_state(NETLOOP_SUCCESS); |
| } |
| } else |
| #endif |
| if (len < TftpBlkSize) |
| tftp_complete(); |
| break; |
| |
| case TFTP_ERROR: |
| printf("\nTFTP error: '%s' (%d)\n", |
| pkt + 2, ntohs(*(__be16 *)pkt)); |
| |
| switch (ntohs(*(__be16 *)pkt)) { |
| case TFTP_ERR_FILE_NOT_FOUND: |
| case TFTP_ERR_ACCESS_DENIED: |
| puts("Not retrying...\n"); |
| eth_halt(); |
| net_set_state(NETLOOP_FAIL); |
| break; |
| case TFTP_ERR_UNDEFINED: |
| case TFTP_ERR_DISK_FULL: |
| case TFTP_ERR_UNEXPECTED_OPCODE: |
| case TFTP_ERR_UNKNOWN_TRANSFER_ID: |
| case TFTP_ERR_FILE_ALREADY_EXISTS: |
| default: |
| puts("Starting again\n\n"); |
| #ifdef CONFIG_MCAST_TFTP |
| mcast_cleanup(); |
| #endif |
| NetStartAgain(); |
| break; |
| } |
| break; |
| } |
| } |
| |
| |
| static void |
| TftpTimeout(void) |
| { |
| if (++TftpTimeoutCount > TftpTimeoutCountMax) { |
| restart("Retry count exceeded"); |
| } else { |
| puts("T "); |
| NetSetTimeout(TftpTimeoutMSecs, TftpTimeout); |
| if (TftpState != STATE_RECV_WRQ) |
| TftpSend(); |
| } |
| } |
| |
| |
| void TftpStart(enum proto_t protocol) |
| { |
| char *ep; /* Environment pointer */ |
| |
| /* |
| * Allow the user to choose TFTP blocksize and timeout. |
| * TFTP protocol has a minimal timeout of 1 second. |
| */ |
| ep = getenv("tftpblocksize"); |
| if (ep != NULL) |
| TftpBlkSizeOption = simple_strtol(ep, NULL, 10); |
| |
| ep = getenv("tftptimeout"); |
| if (ep != NULL) |
| TftpTimeoutMSecs = simple_strtol(ep, NULL, 10); |
| |
| if (TftpTimeoutMSecs < 1000) { |
| printf("TFTP timeout (%ld ms) too low, " |
| "set minimum = 1000 ms\n", |
| TftpTimeoutMSecs); |
| TftpTimeoutMSecs = 1000; |
| } |
| |
| debug("TFTP blocksize = %i, timeout = %ld ms\n", |
| TftpBlkSizeOption, TftpTimeoutMSecs); |
| |
| tftp_remote_ip = net_server_ip; |
| if (net_boot_file_name[0] == '\0') { |
| sprintf(default_filename, "%02X%02X%02X%02X.img", |
| net_ip.s_addr & 0xFF, |
| (net_ip.s_addr >> 8) & 0xFF, |
| (net_ip.s_addr >> 16) & 0xFF, |
| (net_ip.s_addr >> 24) & 0xFF); |
| |
| strncpy(tftp_filename, default_filename, MAX_LEN); |
| tftp_filename[MAX_LEN-1] = 0; |
| |
| printf("*** Warning: no boot file name; using '%s'\n", |
| tftp_filename); |
| } else { |
| char *p = strchr(net_boot_file_name, ':'); |
| |
| if (p == NULL) { |
| strncpy(tftp_filename, net_boot_file_name, MAX_LEN); |
| tftp_filename[MAX_LEN-1] = 0; |
| } else { |
| tftp_remote_ip = string_to_ip(net_boot_file_name); |
| strncpy(tftp_filename, p + 1, MAX_LEN); |
| tftp_filename[MAX_LEN-1] = 0; |
| } |
| } |
| |
| printf("Using %s device\n", eth_get_name()); |
| printf("TFTP %s server %pI4; our IP address is %pI4", |
| #ifdef CONFIG_CMD_TFTPPUT |
| protocol == TFTPPUT ? "to" : "from", |
| #else |
| "from", |
| #endif |
| &tftp_remote_ip, &net_ip); |
| |
| /* Check if we need to send across this subnet */ |
| if (net_gateway.s_addr && net_netmask.s_addr) { |
| struct in_addr our_net; |
| struct in_addr remote_net; |
| |
| our_net.s_addr = net_ip.s_addr & net_netmask.s_addr; |
| remote_net.s_addr = tftp_remote_ip.s_addr & net_netmask.s_addr; |
| if (our_net.s_addr != remote_net.s_addr) |
| printf("; sending through gateway %pI4", &net_gateway); |
| } |
| putc('\n'); |
| |
| printf("Filename '%s'.", tftp_filename); |
| |
| if (net_boot_file_expected_size_in_blocks) { |
| printf(" Size is 0x%x Bytes = ", |
| net_boot_file_expected_size_in_blocks << 9); |
| print_size(net_boot_file_expected_size_in_blocks << 9, ""); |
| } |
| |
| putc('\n'); |
| #ifdef CONFIG_CMD_TFTPPUT |
| TftpWriting = (protocol == TFTPPUT); |
| if (TftpWriting) { |
| printf("Save address: 0x%lx\n", save_addr); |
| printf("Save size: 0x%lx\n", save_size); |
| net_boot_file_size = save_size; |
| puts("Saving: *\b"); |
| TftpState = STATE_SEND_WRQ; |
| new_transfer(); |
| } else |
| #endif |
| { |
| printf("Load address: 0x%lx\n", load_addr); |
| puts("Loading: *\b"); |
| TftpState = STATE_SEND_RRQ; |
| } |
| |
| time_start = get_timer(0); |
| TftpTimeoutCountMax = TftpRRQTimeoutCountMax; |
| |
| NetSetTimeout(TftpTimeoutMSecs, TftpTimeout); |
| net_set_udp_handler(tftp_handler); |
| #ifdef CONFIG_CMD_TFTPPUT |
| net_set_icmp_handler(icmp_handler); |
| #endif |
| TftpRemotePort = WELL_KNOWN_PORT; |
| TftpTimeoutCount = 0; |
| /* Use a pseudo-random port unless a specific port is set */ |
| TftpOurPort = 1024 + (get_timer(0) % 3072); |
| |
| #ifdef CONFIG_TFTP_PORT |
| ep = getenv("tftpdstp"); |
| if (ep != NULL) |
| TftpRemotePort = simple_strtol(ep, NULL, 10); |
| ep = getenv("tftpsrcp"); |
| if (ep != NULL) |
| TftpOurPort = simple_strtol(ep, NULL, 10); |
| #endif |
| TftpBlock = 0; |
| |
| /* zero out server ether in case the server ip has changed */ |
| memset(net_server_ethaddr, 0, 6); |
| /* Revert TftpBlkSize to dflt */ |
| TftpBlkSize = TFTP_BLOCK_SIZE; |
| #ifdef CONFIG_MCAST_TFTP |
| mcast_cleanup(); |
| #endif |
| #ifdef CONFIG_TFTP_TSIZE |
| TftpTsize = 0; |
| TftpNumchars = 0; |
| #endif |
| |
| TftpSend(); |
| } |
| |
| #ifdef CONFIG_CMD_TFTPSRV |
| void |
| TftpStartServer(void) |
| { |
| tftp_filename[0] = 0; |
| |
| printf("Using %s device\n", eth_get_name()); |
| printf("Listening for TFTP transfer on %pI4\n", &net_ip); |
| printf("Load address: 0x%lx\n", load_addr); |
| |
| puts("Loading: *\b"); |
| |
| TftpTimeoutCountMax = TIMEOUT_COUNT; |
| TftpTimeoutCount = 0; |
| TftpTimeoutMSecs = TIMEOUT; |
| NetSetTimeout(TftpTimeoutMSecs, TftpTimeout); |
| |
| /* Revert TftpBlkSize to dflt */ |
| TftpBlkSize = TFTP_BLOCK_SIZE; |
| TftpBlock = 0; |
| TftpOurPort = WELL_KNOWN_PORT; |
| |
| #ifdef CONFIG_TFTP_TSIZE |
| TftpTsize = 0; |
| TftpNumchars = 0; |
| #endif |
| |
| TftpState = STATE_RECV_WRQ; |
| net_set_udp_handler(tftp_handler); |
| |
| /* zero out server ether in case the server ip has changed */ |
| memset(net_server_ethaddr, 0, 6); |
| } |
| #endif /* CONFIG_CMD_TFTPSRV */ |
| |
| #ifdef CONFIG_MCAST_TFTP |
| /* Credits: atftp project. |
| */ |
| |
| /* pick up BcastAddr, Port, and whether I am [now] the master-client. * |
| * Frame: |
| * +-------+-----------+---+-------~~-------+---+ |
| * | opc | multicast | 0 | addr, port, mc | 0 | |
| * +-------+-----------+---+-------~~-------+---+ |
| * The multicast addr/port becomes what I listen to, and if 'mc' is '1' then |
| * I am the new master-client so must send ACKs to DataBlocks. If I am not |
| * master-client, I'm a passive client, gathering what DataBlocks I may and |
| * making note of which ones I got in my bitmask. |
| * In theory, I never go from master->passive.. |
| * .. this comes in with pkt already pointing just past opc |
| */ |
| static void parse_multicast_oack(char *pkt, int len) |
| { |
| int i; |
| struct in_addr addr; |
| char *mc_adr, *port, *mc; |
| |
| mc_adr = port = mc = NULL; |
| /* march along looking for 'multicast\0', which has to start at least |
| * 14 bytes back from the end. |
| */ |
| for (i = 0; i < len-14; i++) |
| if (strcmp(pkt+i, "multicast") == 0) |
| break; |
| if (i >= (len-14)) /* non-Multicast OACK, ign. */ |
| return; |
| |
| i += 10; /* strlen multicast */ |
| mc_adr = pkt+i; |
| for (; i < len; i++) { |
| if (*(pkt+i) == ',') { |
| *(pkt+i) = '\0'; |
| if (port) { |
| mc = pkt+i+1; |
| break; |
| } else { |
| port = pkt+i+1; |
| } |
| } |
| } |
| if (!port || !mc_adr || !mc) |
| return; |
| if (Multicast && MasterClient) { |
| printf("I got a OACK as master Client, WRONG!\n"); |
| return; |
| } |
| /* ..I now accept packets destined for this MCAST addr, port */ |
| if (!Multicast) { |
| if (Bitmap) { |
| printf("Internal failure! no mcast.\n"); |
| free(Bitmap); |
| Bitmap = NULL; |
| ProhibitMcast = 1; |
| return ; |
| } |
| /* I malloc instead of pre-declare; so that if the file ends |
| * up being too big for this bitmap I can retry |
| */ |
| Bitmap = malloc(Mapsize); |
| if (!Bitmap) { |
| printf("No Bitmap, no multicast. Sorry.\n"); |
| ProhibitMcast = 1; |
| return; |
| } |
| memset(Bitmap, 0, Mapsize); |
| PrevBitmapHole = 0; |
| Multicast = 1; |
| } |
| addr = string_to_ip(mc_adr); |
| if (net_mcast_addr.s_addr != addr.s_addr) { |
| if (net_mcast_addr.s_addr) |
| eth_mcast_join(net_mcast_addr, 0); |
| net_mcast_addr = addr; |
| if (eth_mcast_join(net_mcast_addr, 1)) { |
| printf("Fail to set mcast, revert to TFTP\n"); |
| ProhibitMcast = 1; |
| mcast_cleanup(); |
| NetStartAgain(); |
| } |
| } |
| MasterClient = (unsigned char)simple_strtoul((char *)mc, NULL, 10); |
| Mcast_port = (unsigned short)simple_strtoul(port, NULL, 10); |
| printf("Multicast: %s:%d [%d]\n", mc_adr, Mcast_port, MasterClient); |
| return; |
| } |
| |
| #endif /* Multicast TFTP */ |