blob: e7923d65636594979b6d6fa89d77f1a1a0f2b596 [file] [log] [blame]
/*
* (C) Copyright 2000-2009
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __COMMON_H_
#define __COMMON_H_ 1
#ifndef __ASSEMBLY__ /* put C only stuff in this section */
typedef unsigned char uchar;
typedef volatile unsigned long vu_long;
typedef volatile unsigned short vu_short;
typedef volatile unsigned char vu_char;
#include <config.h>
#include <asm-offsets.h>
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/stringify.h>
#include <asm/ptrace.h>
#include <stdarg.h>
#include <linux/kernel.h>
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
#include <pci.h>
#endif
#if defined(CONFIG_IPQ40XX)
#include <../board/qca/arm/ipq40xx/ipq40xx.h>
#elif defined(CONFIG_IPQ806X)
#include <../board/qca/arm/ipq806x/ipq806x.h>
#elif defined(CONFIG_IPQ6018)
#include <../board/qca/arm/ipq6018/ipq6018.h>
#elif defined(CONFIG_IPQ_RUMI)
#include <../board/qca/arm/ipq807x/ipq807x.h>
#endif
#if defined(CONFIG_8xx)
#include <asm/8xx_immap.h>
#if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
defined(CONFIG_MPC866) || \
defined(CONFIG_MPC866P)
# define CONFIG_MPC866_FAMILY 1
#elif defined(CONFIG_MPC885)
# define CONFIG_MPC885_FAMILY 1
#endif
#if defined(CONFIG_MPC860) \
|| defined(CONFIG_MPC860T) \
|| defined(CONFIG_MPC866_FAMILY) \
|| defined(CONFIG_MPC885_FAMILY)
# define CONFIG_MPC86x 1
#endif
#elif defined(CONFIG_5xx)
#include <asm/5xx_immap.h>
#elif defined(CONFIG_MPC5xxx)
#include <mpc5xxx.h>
#elif defined(CONFIG_MPC512X)
#include <asm/immap_512x.h>
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8247) \
|| defined(CONFIG_MPC8272)
#define CONFIG_MPC8272_FAMILY 1
#endif
#include <asm/immap_8260.h>
#endif
#ifdef CONFIG_MPC86xx
#include <mpc86xx.h>
#include <asm/immap_86xx.h>
#endif
#ifdef CONFIG_MPC85xx
#include <mpc85xx.h>
#include <asm/immap_85xx.h>
#endif
#ifdef CONFIG_MPC83xx
#include <mpc83xx.h>
#include <asm/immap_83xx.h>
#endif
#ifdef CONFIG_4xx
#include <asm/ppc4xx.h>
#endif
#ifdef CONFIG_BLACKFIN
#include <asm/blackfin.h>
#endif
#ifdef CONFIG_SOC_DA8XX
#include <asm/arch/hardware.h>
#endif
#ifdef CONFIG_FSL_LSCH3
#include <asm/arch/immap_lsch3.h>
#endif
#ifdef CONFIG_FSL_LSCH2
#include <asm/arch/immap_lsch2.h>
#endif
#include <part.h>
#include <flash.h>
#include <image.h>
/* Bring in printf format macros if inttypes.h is included */
#define __STDC_FORMAT_MACROS
#ifdef __LP64__
#define CONFIG_SYS_SUPPORT_64BIT_DATA
#endif
#ifdef DEBUG
#define _DEBUG 1
#else
#define _DEBUG 0
#endif
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
#define debug_cond(cond, fmt, args...) \
do { \
if (cond) \
printf(pr_fmt(fmt), ##args); \
} while (0)
#define debug(fmt, args...) \
debug_cond(_DEBUG, fmt, ##args)
/*
* An assertion is run-time check done in debug mode only. If DEBUG is not
* defined then it is skipped. If DEBUG is defined and the assertion fails,
* then it calls panic*( which may or may not reset/halt U-Boot (see
* CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
* before release, and after release it is hoped that they don't matter. But
* in any case these failing assertions cannot be fixed with a reset (which
* may just do the same assertion again).
*/
void __assert_fail(const char *assertion, const char *file, unsigned line,
const char *function);
#define assert(x) \
({ if (!(x) && _DEBUG) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
#define error(fmt, args...) do { \
printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
##args, __FILE__, __LINE__, __func__); \
} while (0)
#ifndef BUG
#define BUG() do { \
printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
panic("BUG!"); \
} while (0)
#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
#endif /* BUG */
/* Force a compilation error if condition is true */
#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
typedef void (interrupt_handler_t)(void *);
#include <asm/u-boot.h> /* boot information for Linux kernel */
#include <asm/global_data.h> /* global data used for startup functions */
/*
* enable common handling for all TQM8xxL/M boards:
* - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
* - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
* and for the TQM885D board
*/
#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
# ifndef CONFIG_TQM8xxM
# define CONFIG_TQM8xxM
# endif
#endif
#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
defined(CONFIG_TQM885D)
# ifndef CONFIG_TQM8xxL
# define CONFIG_TQM8xxL
# endif
#endif
#if defined(CONFIG_ENV_IS_EMBEDDED)
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
defined(CONFIG_ENV_IS_IN_NVRAM)
#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
#else
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
/*
* Function Prototypes
*/
int dram_init(void);
void hang (void) __attribute__ ((noreturn));
int timer_init(void);
int cpu_init(void);
/* */
phys_size_t initdram (int);
#include <display_options.h>
/* common/main.c */
void main_loop (void);
int run_command(const char *cmd, int flag);
int run_command_repeatable(const char *cmd, int flag);
/**
* Run a list of commands separated by ; or even \0
*
* Note that if 'len' is not -1, then the command does not need to be nul
* terminated, Memory will be allocated for the command in that case.
*
* @param cmd List of commands to run, each separated bu semicolon
* @param len Length of commands excluding terminator if known (-1 if not)
* @param flag Execution flags (CMD_FLAG_...)
* @return 0 on success, or != 0 on error.
*/
int run_command_list(const char *cmd, int len, int flag);
extern void mmu_setup(void);
extern int mmu_enabled(void);
extern void cp_delay (void);
void secondary_core_entry(char *argv, int *cmd_complete, int *cmd_result);
/* arch/$(ARCH)/lib/board.c */
void board_init_f(ulong);
void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
/**
* board_init_f_mem() - Allocate global data and set stack position
*
* This function is called by each architecture very early in the start-up
* code to set up the environment for board_init_f(). It allocates space for
* global_data (see include/asm-generic/global_data.h) and places the stack
* below this.
*
* This function requires a stack[1] Normally this is at @top. The function
* starts allocating space from 64 bytes below @top. First it creates space
* for global_data. Then it calls arch_setup_gd() which sets gd to point to
* the global_data space and can reserve additional bytes of space if
* required). Finally it allocates early malloc() memory
* (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this,
* and it returned by this function.
*
* [1] Strictly speaking it would be possible to implement this function
* in C on many archs such that it does not require a stack. However this
* does not seem hugely important as only 64 byte are wasted. The 64 bytes
* are used to handle the calling standard which generally requires pushing
* addresses or registers onto the stack. We should be able to get away with
* less if this becomes important.
*
* @top: Top of available memory, also normally the top of the stack
* @return: New stack location
*/
ulong board_init_f_mem(ulong top);
/**
* arch_setup_gd() - Set up the global_data pointer
*
* This pointer is special in some architectures and cannot easily be assigned
* to. For example on x86 it is implemented by adding a specific record to its
* Global Descriptor Table! So we we provide a function to carry out this task.
* For most architectures this can simply be:
*
* gd = gd_ptr;
*
* @gd_ptr: Pointer to global data
*/
void arch_setup_gd(gd_t *gd_ptr);
int checkboard(void);
int show_board_info(void);
int checkflash(void);
int checkdram(void);
int last_stage_init(void);
extern ulong monitor_flash_len;
int mac_read_from_eeprom(void);
extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
int set_cpu_clk_info(void);
int mdm_init(void);
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void);
#else
static inline int print_cpuinfo(void)
{
return 0;
}
#endif
int update_flash_size(int flash_size);
int arch_early_init_r(void);
extern unsigned long __stack_chk_guard;
void __stack_chk_fail(void);
/**
* arch_cpu_init_dm() - init CPU after driver model is available
*
* This is called immediately after driver model is available before
* relocation. This is similar to arch_cpu_init() but is able to reference
* devices
*
* @return 0 if OK, -ve on error
*/
int arch_cpu_init_dm(void);
/**
* Reserve all necessary stacks
*
* This is used in generic board init sequence in common/board_f.c. Each
* architecture could provide this function to tailor the required stacks.
*
* On entry gd->start_addr_sp is pointing to the suggested top of the stack.
* The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
* require only this can leave it untouched.
*
* On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
* positions of the stack. The stack pointer(s) will be set to this later.
* gd->irq_sp is only required, if the architecture needs it.
*
* @return 0 if no error
*/
__weak int arch_reserve_stacks(void);
/**
* Show the DRAM size in a board-specific way
*
* This is used by boards to display DRAM information in their own way.
*
* @param size Size of DRAM (which should be displayed along with other info)
*/
void board_show_dram(phys_size_t size);
/**
* arch_fixup_fdt() - Write arch-specific information to fdt
*
* Defined in arch/$(ARCH)/lib/bootm-fdt.c
*
* @blob: FDT blob to write to
* @return 0 if ok, or -ve FDT_ERR_... on failure
*/
int arch_fixup_fdt(void *blob);
/* common/flash.c */
void flash_perror (int);
/* common/cmd_source.c */
int source (ulong addr, const char *fit_uname);
extern ulong load_addr; /* Default Load Address */
extern ulong save_addr; /* Default Save Address */
extern ulong save_size; /* Default Save Size */
/* common/cmd_doc.c */
void doc_probe(unsigned long physadr);
/* common/cmd_net.c */
int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
/* common/cmd_fat.c */
int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
/* common/cmd_ext2.c */
int do_ext2load(cmd_tbl_t *, int, int, char * const []);
/* common/cmd_nvedit.c */
int env_init (void);
void env_relocate (void);
int envmatch (uchar *, int);
/* Avoid unfortunate conflict with libc's getenv() */
#ifdef CONFIG_SANDBOX
#define getenv uboot_getenv
#endif
char *getenv (const char *);
int getenv_f (const char *name, char *buf, unsigned len);
ulong getenv_ulong(const char *name, int base, ulong default_val);
/**
* getenv_hex() - Return an environment variable as a hex value
*
* Decode an environment as a hex number (it may or may not have a 0x
* prefix). If the environment variable cannot be found, or does not start
* with hex digits, the default value is returned.
*
* @varname: Variable to decode
* @default_val: Value to return on error
*/
ulong getenv_hex(const char *varname, ulong default_val);
/*
* Read an environment variable as a boolean
* Return -1 if variable does not exist (default to true)
*/
int getenv_yesno(const char *var);
#if defined(CONFIG_IPQ40XX_ENV) || defined(CONFIG_IPQ807X_ENV) || defined(CONFIG_IPQ806X_ENV) || defined(CONFIG_IPQ6018_ENV)
extern int (*saveenv)(void);
#else
int saveenv (void);
#endif
int setenv (const char *, const char *);
int setenv_ulong(const char *varname, ulong value);
int setenv_hex(const char *varname, ulong value);
/**
* setenv_addr - Set an environment variable to an address in hex
*
* @varname: Environment variable to set
* @addr: Value to set it to
* @return 0 if ok, 1 on error
*/
static inline int setenv_addr(const char *varname, const void *addr)
{
return setenv_hex(varname, (ulong)addr);
}
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
# include <asm/setup.h>
# include <asm/u-boot-arm.h> /* ARM version to be fixed! */
#endif /* CONFIG_ARM */
#ifdef CONFIG_X86 /* x86 version to be fixed! */
# include <asm/u-boot-x86.h>
#endif /* CONFIG_X86 */
#ifdef CONFIG_SANDBOX
# include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
#endif
#ifdef CONFIG_NDS32
# include <asm/mach-types.h>
# include <asm/setup.h>
# include <asm/u-boot-nds32.h>
#endif /* CONFIG_NDS32 */
#ifdef CONFIG_MIPS
# include <asm/u-boot-mips.h>
#endif /* CONFIG_MIPS */
#ifdef CONFIG_ARC
# include <asm/u-boot-arc.h>
#endif /* CONFIG_ARC */
#ifdef CONFIG_AUTO_COMPLETE
int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
#endif
int get_env_id (void);
void pci_init (void);
void pci_init_board(void);
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
int pci_pre_init (struct pci_controller *);
int is_pci_host (struct pci_controller *);
#endif
#if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
# if defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init (struct pci_controller *);
# endif
# if defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init (struct pci_controller *);
# endif
#if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
void pcie_setup_hoses(int busno);
#endif
#endif
int misc_init_f (void);
int misc_init_r (void);
/* common/exports.c */
void jumptable_init(void);
/* common/kallsysm.c */
const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
/* api/api.c */
void api_init (void);
/* common/memsize.c */
long get_ram_size (long *, long);
phys_size_t get_effective_memsize(void);
/* $(BOARD)/$(BOARD).c */
void reset_phy (void);
void fdc_hw_init (void);
/* $(BOARD)/eeprom.c */
void eeprom_init (int bus);
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
/*
* Set this up regardless of board
* type, to prevent errors.
*/
#if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
# define CONFIG_SYS_DEF_EEPROM_ADDR 0
#else
#if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
# define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
#endif
#endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
#if defined(CONFIG_SPI)
extern void spi_init_f (void);
extern void spi_init_r (void);
extern ssize_t spi_read (uchar *, int, uchar *, int);
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
/* $(BOARD)/$(BOARD).c */
int board_early_init_f (void);
int board_late_init (void);
int board_postclk_init (void); /* after clocks/timebase, before env/serial */
int board_early_init_r (void);
void board_poweroff (void);
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram(void);
#endif /* CONFIG_SYS_DRAM_TEST */
/* $(CPU)/start.S */
#if defined(CONFIG_5xx) || \
defined(CONFIG_8xx)
uint get_immr (uint);
#endif
#if defined(CONFIG_MPC5xxx)
uint get_svr (void);
#endif
uint get_pvr (void);
uint get_svr (void);
uint rd_ic_cst (void);
void wr_ic_cst (uint);
void wr_ic_adr (uint);
uint rd_dc_cst (void);
void wr_dc_cst (uint);
void wr_dc_adr (uint);
int icache_status (void);
void icache_enable (void);
void icache_disable(void);
int dcache_status (void);
void dcache_enable (void);
void dcache_disable(void);
void mmu_disable(void);
#if defined(CONFIG_ARM)
void relocate_code(ulong);
#else
void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
#endif
ulong get_endaddr (void);
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
defined (CONFIG_MPC5xxx) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83xx)
unsigned char in8(unsigned int);
void out8(unsigned int, unsigned char);
unsigned short in16(unsigned int);
unsigned short in16r(unsigned int);
void out16(unsigned int, unsigned short value);
void out16r(unsigned int, unsigned short value);
unsigned long in32(unsigned int);
unsigned long in32r(unsigned int);
void out32(unsigned int, unsigned long value);
void out32r(unsigned int, unsigned long value);
void ppcDcbf(unsigned long value);
void ppcDcbi(unsigned long value);
void ppcSync(void);
void ppcDcbz(unsigned long value);
#endif
#if defined (CONFIG_MICROBLAZE)
unsigned short in16(unsigned int);
void out16(unsigned int, unsigned short value);
#endif
#if defined (CONFIG_MPC83xx)
void ppcDWload(unsigned int *addr, unsigned int *ret);
void ppcDWstore(unsigned int *addr, unsigned int *value);
void disable_addr_trans(void);
void enable_addr_trans(void);
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
void ddr_enable_ecc(unsigned int dram_size);
#endif
#endif
/*
* Return the current value of a monotonically increasing microsecond timer.
* Granularity may be larger than 1us if hardware does not support this.
*/
ulong timer_get_us(void);
/* $(CPU)/cpu.c */
static inline int cpumask_next(int cpu, unsigned int mask)
{
for (cpu++; !((1 << cpu) & mask); cpu++)
;
return cpu;
}
#define for_each_cpu(iter, cpu, num_cpus, mask) \
for (iter = 0, cpu = cpumask_next(-1, mask); \
iter < num_cpus; \
iter++, cpu = cpumask_next(cpu, mask)) \
int cpu_numcores (void);
int cpu_num_dspcores(void);
u32 cpu_mask (void);
u32 cpu_dsp_mask(void);
int is_core_valid (unsigned int);
int probecpu (void);
int checkcpu (void);
int checkicache (void);
int checkdcache (void);
void upmconfig (unsigned int, unsigned int *, unsigned int);
ulong get_tbclk (void);
void reset_misc (void);
void reset_cpu (ulong addr);
#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
void ft_cpu_setup(void *blob, bd_t *bd);
#ifdef CONFIG_PCI
void ft_pci_setup(void *blob, bd_t *bd);
#endif
#endif
void smp_set_core_boot_addr(unsigned long addr, int corenr);
void smp_kick_all_cpus(void);
/* $(CPU)/serial.c */
int serial_init (void);
void serial_setbrg (void);
void serial_putc (const char);
void serial_putc_raw(const char);
void serial_puts (const char *);
int serial_getc (void);
int serial_tstc (void);
/* These versions take a stdio_dev pointer */
struct stdio_dev;
int serial_stub_getc(struct stdio_dev *sdev);
int serial_stub_tstc(struct stdio_dev *sdev);
/* $(CPU)/speed.c */
int get_clocks (void);
int get_clocks_866 (void);
int sdram_adjust_866 (void);
int adjust_sdram_tbs_8xx (void);
#if defined(CONFIG_MPC8260)
int prt_8260_clks (void);
#elif defined(CONFIG_MPC5xxx)
int prt_mpc5xxx_clks (void);
#endif
#ifdef CONFIG_4xx
ulong get_OPB_freq (void);
ulong get_PCI_freq (void);
#endif
#if defined(CONFIG_S3C24X0) || \
defined(CONFIG_LH7A40X) || \
defined(CONFIG_EP93XX)
ulong get_FCLK (void);
ulong get_HCLK (void);
ulong get_PCLK (void);
ulong get_UCLK (void);
#endif
#if defined(CONFIG_LH7A40X)
ulong get_PLLCLK (void);
#endif
#if defined(CONFIG_IMX)
ulong get_systemPLLCLK(void);
ulong get_FCLK(void);
ulong get_HCLK(void);
ulong get_BCLK(void);
ulong get_PERCLK1(void);
ulong get_PERCLK2(void);
ulong get_PERCLK3(void);
#endif
ulong get_bus_freq (ulong);
int get_serial_clock(void);
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
# if defined(CONFIG_OF_LIBFDT)
void ft_fixup_cpu(void *, u64);
void ft_fixup_num_cores(void *);
# endif
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
static inline ulong get_ddr_freq(ulong dummy)
{
return get_bus_freq(dummy);
}
#else
ulong get_ddr_freq(ulong);
#endif
#if defined(CONFIG_4xx)
# if defined(CONFIG_440)
# if defined(CONFIG_440SPE)
unsigned long determine_sysper(void);
unsigned long determine_pci_clock_per(void);
# endif
# endif
typedef PPC4xx_SYS_INFO sys_info_t;
int ppc440spe_revB(void);
void get_sys_info ( sys_info_t * );
#endif
/* $(CPU)/cpu_init.c */
#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
void cpu_init_f (volatile immap_t *immr);
#endif
#if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
void cpu_init_f (void);
#endif
#ifdef CONFIG_MPC85xx
ulong cpu_init_f(void);
#endif
int cpu_init_r (void);
#if defined(CONFIG_MPC8260)
int prt_8260_rsr (void);
#elif defined(CONFIG_MPC83xx)
int prt_83xx_rsr (void);
#endif
/* $(CPU)/interrupts.c */
int interrupt_init (void);
void timer_interrupt (struct pt_regs *);
void external_interrupt (struct pt_regs *);
void irq_install_handler(int, interrupt_handler_t *, void *);
void irq_free_handler (int);
void reset_timer (void);
ulong get_timer (ulong base);
/* Return value of monotonic microsecond timer */
unsigned long timer_get_us(void);
void enable_interrupts (void);
int disable_interrupts (void);
/* $(CPU)/.../commproc.c */
int dpram_init (void);
uint dpram_base(void);
uint dpram_base_align(uint align);
uint dpram_alloc(uint size);
uint dpram_alloc_align(uint size,uint align);
void bootcount_store (ulong);
ulong bootcount_load (void);
#define BOOTCOUNT_MAGIC 0xB001C041
/* $(CPU)/.../<eth> */
void mii_init (void);
/* $(CPU)/.../lcd.c */
ulong lcd_setmem (ulong);
/* $(CPU)/.../video.c */
ulong video_setmem (ulong);
/* arch/$(ARCH)/lib/cache.c */
void enable_caches(void);
void flush_cache (unsigned long, unsigned long);
void flush_dcache_all(void);
void flush_dcache_range(unsigned long start, unsigned long stop);
void invalidate_dcache_range(unsigned long start, unsigned long stop);
void invalidate_dcache_all(void);
void invalidate_icache_all(void);
void set_l2_indirect_reg(u32 reg_addr, u32 val);
void clear_l2cache_err(void);
u32 get_l2_indirect_reg(u32 reg_addr);
void report_l2err(u32 l2esr);
enum {
/* Disable caches (else flush caches but leave them active) */
CBL_DISABLE_CACHES = 1 << 0,
CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
CBL_ALL = 3,
};
/**
* Clean up ready for linux
*
* @param flags Flags to control what is done
*/
int cleanup_before_linux_select(int flags);
/* arch/$(ARCH)/lib/ticks.S */
uint64_t get_ticks(void);
void wait_ticks (unsigned long);
/* arch/$(ARCH)/lib/time.c */
void __udelay (unsigned long);
ulong usec2ticks (unsigned long usec);
ulong ticks2usec (unsigned long ticks);
int init_timebase (void);
/* lib/gunzip.c */
int gunzip(void *, int, unsigned char *, unsigned long *);
int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
int stoponerr, int offset);
/**
* gzwrite progress indicators: defined weak to allow board-specific
* overrides:
*
* gzwrite_progress_init called on startup
* gzwrite_progress called during decompress/write loop
* gzwrite_progress_finish called at end of loop to
* indicate success (retcode=0) or failure
*/
void gzwrite_progress_init(u64 expected_size);
void gzwrite_progress(int iteration,
u64 bytes_written,
u64 total_bytes);
void gzwrite_progress_finish(int retcode,
u64 totalwritten,
u64 totalsize,
u32 expected_crc,
u32 calculated_crc);
/**
* decompress and write gzipped image from memory to block device
*
* @param src compressed image address
* @param len compressed image length in bytes
* @param dev block device descriptor
* @param szwritebuf bytes per write (pad to erase size)
* @param startoffs offset in bytes of first write
* @param szexpected expected uncompressed length
* may be zero to use gzip trailer
* for files under 4GiB
*/
int gzwrite(unsigned char *src, int len,
struct block_dev_desc *dev,
unsigned long szwritebuf,
u64 startoffs,
u64 szexpected);
/* lib/lz4_wrapper.c */
int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
/* lib/qsort.c */
void qsort(void *base, size_t nmemb, size_t size,
int(*compar)(const void *, const void *));
int strcmp_compar(const void *, const void *);
/* lib/time.c */
void udelay (unsigned long);
void mdelay(unsigned long);
/* lib/uuid.c */
#include <uuid.h>
/* lib/vsprintf.c */
#include <vsprintf.h>
/* lib/strmhz.c */
char * strmhz(char *buf, unsigned long hz);
/* lib/crc32.c */
#include <u-boot/crc.h>
/* lib/rand.c */
#define RAND_MAX -1U
void srand(unsigned int seed);
unsigned int rand(void);
unsigned int rand_r(unsigned int *seedp);
/*
* STDIO based functions (can always be used)
*/
/* serial stuff */
int serial_printf (const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
/* stdin */
int getc(void);
int tstc(void);
/* stdout */
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
#define putc(...) do { } while (0)
#define puts(...) do { } while (0)
#define printf(...) do { } while (0)
#define vprintf(...) do { } while (0)
#else
void putc(const char c);
void puts(const char *s);
int printf(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
int vprintf(const char *fmt, va_list args);
#endif
/* stderr */
#define eputc(c) fputc(stderr, c)
#define eputs(s) fputs(stderr, s)
#define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
/*
* FILE based functions (can only be used AFTER relocation!)
*/
#define stdin 0
#define stdout 1
#define stderr 2
#define MAX_FILES 3
int fprintf(int file, const char *fmt, ...)
__attribute__ ((format (__printf__, 2, 3)));
void fputs(int file, const char *s);
void fputc(int file, const char c);
int ftstc(int file);
int fgetc(int file);
/* lib/gzip.c */
int gzip(void *dst, unsigned long *lenp,
unsigned char *src, unsigned long srclen);
int zzip(void *dst, unsigned long *lenp, unsigned char *src,
unsigned long srclen, int stoponerr,
int (*func)(unsigned long, unsigned long));
/* lib/net_utils.c */
#include <net.h>
static inline struct in_addr getenv_ip(char *var)
{
return string_to_ip(getenv(var));
}
int pcmcia_init (void);
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
#include <bootstage.h>
#ifdef CONFIG_SHOW_ACTIVITY
void show_activity(int arg);
#endif
/* Multicore arch functions */
#ifdef CONFIG_MP
int cpu_status(int nr);
int cpu_reset(int nr);
int cpu_disable(int nr);
int cpu_release(int nr, int argc, char * const argv[]);
#endif
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PPC
/*
* Has to be included outside of the #ifndef __ASSEMBLY__ section.
* Otherwise might lead to compilation errors in assembler files.
*/
#include <asm/cache.h>
#endif
/* Put only stuff here that the assembler can digest */
#ifdef CONFIG_POST
#define CONFIG_HAS_POST
#ifndef CONFIG_POST_ALT_LIST
#define CONFIG_POST_STD_LIST
#endif
#endif
#ifdef CONFIG_INIT_CRITICAL
#error CONFIG_INIT_CRITICAL is deprecated!
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
/*
* check_member() - Check the offset of a structure member
*
* @structure: Name of structure (e.g. global_data)
* @member: Name of member (e.g. baudrate)
* @offset: Expected offset in bytes
*/
#define check_member(structure, member, offset) _Static_assert( \
offsetof(struct structure, member) == offset, \
"`struct " #structure "` offset for `" #member "` is not " #offset)
/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
#ifdef CONFIG_EFI_STUB
#define ll_boot_init() false
#else
#define ll_boot_init() true
#endif
/* Pull in stuff for the build system */
#ifdef DO_DEPS_ONLY
# include <environment.h>
#endif
#endif /* __COMMON_H_ */