| /* |
| * Copyright 2008,2010 Freescale Semiconductor, Inc |
| * Andy Fleming |
| * |
| * Based (loosely) on the Linux code |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _MMC_H_ |
| #define _MMC_H_ |
| |
| #include <linux/list.h> |
| |
| #define SD_VERSION_SD 0x20000 |
| #define SD_VERSION_2 (SD_VERSION_SD | 0x20) |
| #define SD_VERSION_1_0 (SD_VERSION_SD | 0x10) |
| #define SD_VERSION_1_10 (SD_VERSION_SD | 0x1a) |
| #define MMC_VERSION_MMC 0x10000 |
| #define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC) |
| #define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x12) |
| #define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x14) |
| #define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x22) |
| #define MMC_VERSION_3 (MMC_VERSION_MMC | 0x30) |
| #define MMC_VERSION_4 (MMC_VERSION_MMC | 0x40) |
| |
| #define MMC_MODE_HS 0x001 |
| #define MMC_MODE_HS_52MHz 0x010 |
| #define MMC_MODE_4BIT 0x100 |
| #define MMC_MODE_8BIT 0x200 |
| #define MMC_MODE_SPI 0x400 |
| |
| #define SD_DATA_4BIT 0x00040000 |
| |
| #define IS_SD(x) (x->version & SD_VERSION_SD) |
| |
| #define MMC_DATA_READ 1 |
| #define MMC_DATA_WRITE 2 |
| |
| #define NO_CARD_ERR -16 /* No SD/MMC card inserted */ |
| #define UNUSABLE_ERR -17 /* Unusable Card */ |
| #define COMM_ERR -18 /* Communications Error */ |
| #define TIMEOUT -19 |
| |
| #define MMC_CMD_GO_IDLE_STATE 0 |
| #define MMC_CMD_SEND_OP_COND 1 |
| #define MMC_CMD_ALL_SEND_CID 2 |
| #define MMC_CMD_SET_RELATIVE_ADDR 3 |
| #define MMC_CMD_SET_DSR 4 |
| #define MMC_CMD_SWITCH 6 |
| #define MMC_CMD_SELECT_CARD 7 |
| #define MMC_CMD_SEND_EXT_CSD 8 |
| #define MMC_CMD_SEND_CSD 9 |
| #define MMC_CMD_SEND_CID 10 |
| #define MMC_CMD_STOP_TRANSMISSION 12 |
| #define MMC_CMD_SEND_STATUS 13 |
| #define MMC_CMD_SET_BLOCKLEN 16 |
| #define MMC_CMD_READ_SINGLE_BLOCK 17 |
| #define MMC_CMD_READ_MULTIPLE_BLOCK 18 |
| #define MMC_CMD_WRITE_SINGLE_BLOCK 24 |
| #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 |
| #define MMC_CMD_APP_CMD 55 |
| #define MMC_CMD_SPI_READ_OCR 58 |
| #define MMC_CMD_SPI_CRC_ON_OFF 59 |
| |
| #define SD_CMD_SEND_RELATIVE_ADDR 3 |
| #define SD_CMD_SWITCH_FUNC 6 |
| #define SD_CMD_SEND_IF_COND 8 |
| |
| #define SD_CMD_APP_SET_BUS_WIDTH 6 |
| #define SD_CMD_APP_SEND_OP_COND 41 |
| #define SD_CMD_APP_SEND_SCR 51 |
| |
| /* SCR definitions in different words */ |
| #define SD_HIGHSPEED_BUSY 0x00020000 |
| #define SD_HIGHSPEED_SUPPORTED 0x00020000 |
| |
| #define MMC_HS_TIMING 0x00000100 |
| #define MMC_HS_52MHZ 0x2 |
| |
| #define OCR_BUSY 0x80000000 |
| #define OCR_HCS 0x40000000 |
| |
| #define MMC_STATUS_MASK (~0x0206BF7F) |
| #define MMC_STATUS_RDY_FOR_DATA (1<<8) |
| #define MMC_STATUS_CURR_STATE (0xf<<9) |
| |
| #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ |
| #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ |
| #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ |
| #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ |
| #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ |
| #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ |
| #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ |
| #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ |
| #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ |
| #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ |
| #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ |
| #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ |
| #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ |
| #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ |
| #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ |
| #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ |
| #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ |
| |
| #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ |
| #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte |
| addressed by index which are |
| 1 in value field */ |
| #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte |
| addressed by index, which are |
| 1 in value field */ |
| #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */ |
| |
| #define SD_SWITCH_CHECK 0 |
| #define SD_SWITCH_SWITCH 1 |
| |
| /* |
| * EXT_CSD fields |
| */ |
| |
| #define EXT_CSD_BUS_WIDTH 183 /* R/W */ |
| #define EXT_CSD_HS_TIMING 185 /* R/W */ |
| #define EXT_CSD_CARD_TYPE 196 /* RO */ |
| #define EXT_CSD_REV 192 /* RO */ |
| #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ |
| |
| /* |
| * EXT_CSD field definitions |
| */ |
| |
| #define EXT_CSD_CMD_SET_NORMAL (1<<0) |
| #define EXT_CSD_CMD_SET_SECURE (1<<1) |
| #define EXT_CSD_CMD_SET_CPSECURE (1<<2) |
| |
| #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ |
| #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ |
| |
| #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ |
| #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ |
| #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ |
| |
| #define R1_ILLEGAL_COMMAND (1 << 22) |
| #define R1_APP_CMD (1 << 5) |
| |
| #define MMC_RSP_PRESENT (1 << 0) |
| #define MMC_RSP_136 (1 << 1) /* 136 bit response */ |
| #define MMC_RSP_CRC (1 << 2) /* expect valid crc */ |
| #define MMC_RSP_BUSY (1 << 3) /* card may send busy */ |
| #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ |
| |
| #define MMC_RSP_NONE (0) |
| #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) |
| #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ |
| MMC_RSP_BUSY) |
| #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) |
| #define MMC_RSP_R3 (MMC_RSP_PRESENT) |
| #define MMC_RSP_R4 (MMC_RSP_PRESENT) |
| #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) |
| #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) |
| #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) |
| |
| |
| struct mmc_cid { |
| unsigned long psn; |
| unsigned short oid; |
| unsigned char mid; |
| unsigned char prv; |
| unsigned char mdt; |
| char pnm[7]; |
| }; |
| |
| /* |
| * WARNING! |
| * |
| * This structure is used by atmel_mci.c only. |
| * It works for the AVR32 architecture but NOT |
| * for ARM/AT91 architectures. |
| * Its use is highly depreciated. |
| * After the atmel_mci.c driver for AVR32 has |
| * been replaced this structure will be removed. |
| */ |
| struct mmc_csd |
| { |
| u8 csd_structure:2, |
| spec_vers:4, |
| rsvd1:2; |
| u8 taac; |
| u8 nsac; |
| u8 tran_speed; |
| u16 ccc:12, |
| read_bl_len:4; |
| u64 read_bl_partial:1, |
| write_blk_misalign:1, |
| read_blk_misalign:1, |
| dsr_imp:1, |
| rsvd2:2, |
| c_size:12, |
| vdd_r_curr_min:3, |
| vdd_r_curr_max:3, |
| vdd_w_curr_min:3, |
| vdd_w_curr_max:3, |
| c_size_mult:3, |
| sector_size:5, |
| erase_grp_size:5, |
| wp_grp_size:5, |
| wp_grp_enable:1, |
| default_ecc:2, |
| r2w_factor:3, |
| write_bl_len:4, |
| write_bl_partial:1, |
| rsvd3:5; |
| u8 file_format_grp:1, |
| copy:1, |
| perm_write_protect:1, |
| tmp_write_protect:1, |
| file_format:2, |
| ecc:2; |
| u8 crc:7; |
| u8 one:1; |
| }; |
| |
| struct mmc_cmd { |
| ushort cmdidx; |
| uint resp_type; |
| uint cmdarg; |
| uint response[4]; |
| uint flags; |
| }; |
| |
| struct mmc_data { |
| union { |
| char *dest; |
| const char *src; /* src buffers don't get written to */ |
| }; |
| uint flags; |
| uint blocks; |
| uint blocksize; |
| }; |
| |
| struct mmc { |
| struct list_head link; |
| char name[32]; |
| void *priv; |
| uint voltages; |
| uint version; |
| uint f_min; |
| uint f_max; |
| int high_capacity; |
| uint bus_width; |
| uint clock; |
| uint card_caps; |
| uint host_caps; |
| uint ocr; |
| uint scr[2]; |
| uint csd[4]; |
| uint cid[4]; |
| ushort rca; |
| uint tran_speed; |
| uint read_bl_len; |
| uint write_bl_len; |
| u64 capacity; |
| block_dev_desc_t block_dev; |
| int (*send_cmd)(struct mmc *mmc, |
| struct mmc_cmd *cmd, struct mmc_data *data); |
| void (*set_ios)(struct mmc *mmc); |
| int (*init)(struct mmc *mmc); |
| #ifdef CONFIG_MMC_MBLOCK |
| uint b_max; |
| #endif |
| }; |
| |
| int mmc_register(struct mmc *mmc); |
| int mmc_initialize(bd_t *bis); |
| int mmc_init(struct mmc *mmc); |
| int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); |
| void mmc_set_clock(struct mmc *mmc, uint clock); |
| struct mmc *find_mmc_device(int dev_num); |
| int mmc_set_dev(int dev_num); |
| void print_mmc_devices(char separator); |
| int board_mmc_getcd(u8 *cd, struct mmc *mmc); |
| |
| #ifdef CONFIG_GENERIC_MMC |
| int atmel_mci_init(void *regs); |
| #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) |
| struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); |
| #else |
| int mmc_legacy_init(int verbose); |
| #endif |
| |
| #endif /* _MMC_H_ */ |