| ###################################################################### |
| # Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License version 2 and |
| # only version 2 as published by the Free Software Foundation. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| ##################################################################### |
| |
| """ |
| Script to create a U-Boot flashable multi-image blob. |
| |
| This script creates a multi-image blob, from a bunch of images, and |
| adds a U-Boot shell script to the blob, that can flash the images from |
| within U-Boot. The procedure to use this script is listed below. |
| |
| 1. Create an images folder. Ex: my-pack |
| |
| 2. Copy all the images to be flashed into the folder. |
| |
| 3. Copy the partition MBN file into the folder. The file should be |
| named 'partition.mbn'. This is used to determine the offsets for |
| each of the named partitions. |
| |
| 4. Create a flash configuration file, specifying the images be |
| flashed, and the partition in which the images is to be |
| flashed. The flash configuration file can be specified using the |
| -f option, default is flash.conf. |
| |
| 5. Invoke 'pack' with the folder name as argument, pass flash |
| parameters as arguments if required. A single image file will |
| be created, out side the images folder, with .img suffix. Ex: |
| my-pack.img |
| |
| 6. Transfer the file into a valid SDRAM address and invoke the |
| following U-Boot command to flash the images. Replace 0x41000000, |
| with address location where the image has been loaded. The script |
| expects the variable 'imgaddr' to be set. |
| |
| u-boot> imgaddr=0x88000000 source $imgaddr:script |
| |
| Host-side Pre-req |
| |
| * Python >= 2.6 |
| * ordereddict >= 1.1 (for Python 2.6) |
| * mkimage >= 2012.07 |
| * dtc >= 1.2.0 |
| |
| Target-side Pre-req |
| |
| The following U-Boot config macros should be enabled, for the |
| generated flashing script to work. |
| |
| * CONFIG_FIT -- FIT image format support |
| * CONFIG_SYS_HUSH_PARSER -- bash style scripting support |
| * CONFIG_SYS_NULLDEV -- redirecting command output support |
| * CONFIG_CMD_XIMG -- extracting sub-images support |
| * CONFIG_CMD_NAND -- NAND Flash commands support |
| * CONFIG_CMD_NAND_YAFFS -- NAND YAFFS2 write support |
| * CONFIG_CMD_SF -- SPI Flash commands support |
| """ |
| |
| from os.path import getsize |
| from getopt import getopt |
| from getopt import GetoptError |
| from collections import namedtuple |
| from string import Template |
| |
| import os |
| import sys |
| import os.path |
| import subprocess |
| import struct |
| import hashlib |
| import xml.etree.ElementTree as ET |
| |
| version = "1.1" |
| ARCH_NAME = "" |
| SRC_DIR = "" |
| MODE = "" |
| # |
| # Python 2.6 and earlier did not have OrderedDict use the backport |
| # from ordereddict package. If that is not available report error. |
| # |
| try: |
| from collections import OrderedDict |
| except ImportError: |
| try: |
| from ordereddict import OrderedDict |
| except ImportError: |
| print "error: this script requires the 'ordereddict' class." |
| print "Try 'pip install --user ordereddict'" |
| print "Or 'easy_install --user ordereddict'" |
| sys.exit(1) |
| |
| def error(msg, ex=None): |
| """Print an error message and exit. |
| |
| msg -- string, the message to print |
| ex -- exception, the associate exception, if any |
| """ |
| |
| sys.stderr.write("pack: %s" % msg) |
| if ex != None: sys.stderr.write(": %s" % str(ex)) |
| sys.stderr.write("\n") |
| sys.exit(1) |
| |
| FlashInfo = namedtuple("FlashInfo", "type pagesize blocksize chipsize") |
| ImageInfo = namedtuple("ProgInfo", "name filename type") |
| PartInfo = namedtuple("PartInfo", "name offset length which_flash") |
| |
| def roundup(value, roundto): |
| """Return the next largest multiple of 'roundto'.""" |
| |
| return ((value + roundto - 1) // roundto) * roundto |
| |
| class GPT(object): |
| GPTheader = namedtuple("GPTheader", "signature revision header_size" |
| " crc32 current_lba backup_lba first_usable_lba" |
| " last_usable_lba disk_guid start_lba_part_entry" |
| " num_part_entry part_entry_size part_crc32") |
| GPT_SIGNATURE = 'EFI PART' |
| GPT_REVISION = '\x00\x00\x01\x00' |
| GPT_HEADER_SIZE = 0x5C |
| GPT_HEADER_FMT = "<8s4sLL4xQQQQ16sQLLL" |
| |
| GPTtable = namedtuple("GPTtable", "part_type unique_guid first_lba" |
| " last_lba attribute_flag part_name") |
| GPT_TABLE_FMT = "<16s16sQQQ72s" |
| |
| def __init__(self, filename, pagesize, blocksize, chipsize): |
| self.filename = filename |
| self.pagesize = pagesize |
| self.blocksize = blocksize |
| self.chipsize = chipsize |
| self.__partitions = OrderedDict() |
| |
| def __validate_and_read_parts(self, part_fp): |
| """Validate the GPT and read the partition""" |
| part_fp.seek(self.blocksize, os.SEEK_SET) |
| gptheader_str = part_fp.read(struct.calcsize(GPT.GPT_HEADER_FMT)) |
| gptheader = struct.unpack(GPT.GPT_HEADER_FMT, gptheader_str) |
| gptheader = GPT.GPTheader._make(gptheader) |
| |
| if gptheader.signature != GPT.GPT_SIGNATURE: |
| error("Invalid signature") |
| |
| if gptheader.revision != GPT.GPT_REVISION: |
| error("Unsupported GPT Revision") |
| |
| if gptheader.header_size != GPT.GPT_HEADER_SIZE: |
| error("Invalid Header size") |
| |
| # Adding GPT partition info. This has to be flashed first. |
| # GPT Header starts at LBA1 so (current_lba -1) will give the |
| # starting of primary GPT. |
| # blocksize will equal to gptheader.first_usuable_lba - current_lba + 1 |
| |
| name = "0:GPT" |
| block_start = gptheader.current_lba - 1 |
| block_count = gptheader.first_usable_lba - gptheader.current_lba + 1 |
| which_flash = 0 |
| part_info = PartInfo(name, block_start, block_count, which_flash) |
| self.__partitions[name] = part_info |
| |
| part_fp.seek(2 * self.blocksize, os.SEEK_SET) |
| |
| for i in range(gptheader.num_part_entry): |
| gpt_table_str = part_fp.read(struct.calcsize(GPT.GPT_TABLE_FMT)) |
| gpt_table = struct.unpack(GPT.GPT_TABLE_FMT, gpt_table_str) |
| gpt_table = GPT.GPTtable._make(gpt_table) |
| |
| block_start = gpt_table.first_lba |
| block_count = gpt_table.last_lba - gpt_table.first_lba + 1 |
| |
| part_name = gpt_table.part_name.strip(chr(0)) |
| name = part_name.replace('\0','') |
| part_info = PartInfo(name, block_start, block_count, which_flash) |
| self.__partitions[name] = part_info |
| |
| # Adding the GPT Backup partition. |
| # GPT header backup_lba gives block number where the GPT backup header will be. |
| # GPT Backup header will start from offset of 32 blocks before |
| # the GPTheader.backup_lba. Backup GPT size is 33 blocks. |
| name = "0:GPTBACKUP" |
| block_start = gptheader.backup_lba - 32 |
| block_count = 33 |
| part_info = PartInfo(name, block_start, block_count, which_flash) |
| self.__partitions[name] = part_info |
| |
| def get_parts(self): |
| """Returns a list of partitions present in the GPT.""" |
| |
| try: |
| with open(self.filename, "r") as part_fp: |
| self.__validate_and_read_parts(part_fp) |
| except IOError, e: |
| error("error opening %s" % self.filename, e) |
| |
| return self.__partitions |
| |
| class MIBIB(object): |
| Header = namedtuple("Header", "magic1 magic2 version age") |
| HEADER_FMT = "<LLLL" |
| HEADER_MAGIC1 = 0xFE569FAC |
| HEADER_MAGIC2 = 0xCD7F127A |
| HEADER_VERSION = 4 |
| |
| Table = namedtuple("Table", "magic1 magic2 version numparts") |
| TABLE_FMT = "<LLLL" |
| TABLE_MAGIC1 = 0x55EE73AA |
| TABLE_MAGIC2 = 0xE35EBDDB |
| TABLE_VERSION_IPQ806X = 3 |
| TABLE_VERSION_OTHERS = 4 |
| |
| |
| Entry = namedtuple("Entry", "name offset length" |
| " attr1 attr2 attr3 which_flash") |
| ENTRY_FMT = "<16sLLBBBB" |
| |
| def __init__(self, filename, pagesize, blocksize, chipsize, nand_blocksize, nand_chipsize, root_part): |
| self.filename = filename |
| self.pagesize = pagesize |
| self.blocksize = blocksize |
| self.chipsize = chipsize |
| self.nand_blocksize = nand_blocksize |
| self.nand_chipsize = nand_chipsize |
| self.__partitions = OrderedDict() |
| |
| def __validate(self, part_fp): |
| """Validate the MIBIB by checking for magic bytes.""" |
| |
| mheader_str = part_fp.read(struct.calcsize(MIBIB.HEADER_FMT)) |
| mheader = struct.unpack(MIBIB.HEADER_FMT, mheader_str) |
| mheader = MIBIB.Header._make(mheader) |
| |
| if (mheader.magic1 != MIBIB.HEADER_MAGIC1 |
| or mheader.magic2 != MIBIB.HEADER_MAGIC2): |
| """ mheader.magic1 = MIBIB.HEADER_MAGIC1 |
| mheader.magic2 = MIBIB.HEADER_MAGIC2 """ |
| error("invalid partition table, magic byte not present") |
| |
| if mheader.version != MIBIB.HEADER_VERSION: |
| error("unsupport mibib version") |
| |
| def __read_parts(self, part_fp): |
| """Read the partitions from the MIBIB.""" |
| global ARCH_NAME |
| part_fp.seek(self.pagesize, os.SEEK_SET) |
| mtable_str = part_fp.read(struct.calcsize(MIBIB.TABLE_FMT)) |
| mtable = struct.unpack(MIBIB.TABLE_FMT, mtable_str) |
| mtable = MIBIB.Table._make(mtable) |
| |
| if (mtable.magic1 != MIBIB.TABLE_MAGIC1 |
| or mtable.magic2 != MIBIB.TABLE_MAGIC2): |
| """ mtable.magic1 = MIBIB.TABLE_MAGIC1 |
| mtable.magic2 = MIBIB.TABLE_MAGIC2 """ |
| error("invalid sys part. table, magic byte not present") |
| if ARCH_NAME == "ipq806x": |
| if mtable.version != MIBIB.TABLE_VERSION_IPQ806X: |
| error("unsupported partition table version") |
| else: |
| if mtable.version != MIBIB.TABLE_VERSION_OTHERS: |
| error("unsupported partition table version") |
| |
| for i in range(mtable.numparts): |
| mentry_str = part_fp.read(struct.calcsize(MIBIB.ENTRY_FMT)) |
| mentry = struct.unpack(MIBIB.ENTRY_FMT, mentry_str) |
| mentry = MIBIB.Entry._make(mentry) |
| self.flash_flag = self.blocksize |
| self.chip_flag = self.chipsize |
| |
| if mentry.which_flash != 0: |
| self.flash_flag = self.nand_blocksize |
| self.chip_flag = self.nand_chipsize |
| |
| byte_offset = mentry.offset * self.flash_flag |
| |
| if mentry.length == 0xFFFFFFFF: |
| byte_length = self.chip_flag - byte_offset |
| else: |
| byte_length = mentry.length * self.flash_flag |
| |
| part_name = mentry.name.strip(chr(0)) |
| part_info = PartInfo(part_name, byte_offset, byte_length, mentry.which_flash) |
| self.__partitions[part_name] = part_info |
| |
| def get_parts(self): |
| """Returns a list of partitions present in the MIBIB. CE """ |
| |
| try: |
| with open(self.filename, "r") as part_fp: |
| self.__validate(part_fp) |
| self.__read_parts(part_fp) |
| except IOError, e: |
| error("error opening %s" % self.filename, e) |
| |
| return self.__partitions |
| |
| class FlashScript(object): |
| """Base class for creating flash scripts.""" |
| |
| def __init__(self, flinfo): |
| self.pagesize = flinfo.pagesize |
| self.blocksize = flinfo.blocksize |
| self.script = [] |
| self.parts = [] |
| self.curr_stdout = "serial" |
| self.activity = None |
| self.flash_type = flinfo.type |
| |
| self.script.append('if test "x$verbose" = "x"; then\n') |
| self.script.append("failedmsg='[failed]'\n") |
| self.script.append('else\n') |
| self.script.append("failedmsg='%s Failed'\n" % ("#" * 40)) |
| self.script.append('fi\n') |
| |
| def append(self, cmd, fatal=True): |
| """Add a command to the script. |
| |
| Add additional code, to terminate on error. This can be |
| supressed by passing 'fatal' as False. |
| """ |
| |
| if fatal: |
| self.script.append(cmd |
| + ' || setenv stdout serial' |
| + ' && echo "$failedmsg"' |
| + ' && exit 1\n') |
| else: |
| self.script.append(cmd + "\n") |
| |
| def dumps(self): |
| """Return the created script as a string.""" |
| return "".join(self.script) |
| |
| def redirect(self, dev): |
| """Generate code, to redirect command output to a device.""" |
| |
| if self.curr_stdout == dev: |
| return |
| |
| self.append("setenv stdout %s" % dev, fatal=False) |
| self.curr_stdout = dev |
| |
| def start_activity(self, activity): |
| """Generate code, to indicate start of an activity.""" |
| |
| self.script.append('if test "x$verbose" = "x"; then\n') |
| self.echo("'%-40.40s'" % activity, nl=False) |
| self.script.append('else\n') |
| self.echo("'%s %s Started'" % ("#" * 40, activity), verbose=True) |
| self.script.append('fi\n') |
| self.activity = activity |
| |
| def finish_activity(self): |
| """Generate code, to indicate end of an activity.""" |
| |
| self.script.append('if test "x$verbose" = "x"; then\n') |
| self.echo("'[ done ]'") |
| self.redirect("serial") |
| self.script.append('else\n') |
| self.echo("'%s %s Done'" % ("#" * 40, self.activity), verbose=True) |
| self.script.append('fi\n') |
| |
| def imxtract(self, part): |
| """Generate code, to extract image location, from a multi-image blob. |
| |
| part -- string, name of the sub-image |
| |
| Sets the $fileaddr environment variable, to point to the |
| location of the sub-image. |
| """ |
| |
| self.append("imxtract $imgaddr %s" % part) |
| |
| def echo(self, msg, nl=True, verbose=False): |
| """Generate code, to print a message. |
| |
| nl -- bool, indicates whether newline is to be printed |
| verbose -- bool, indicates whether printing in verbose mode |
| """ |
| |
| if not verbose: |
| self.redirect("serial") |
| |
| if nl: |
| self.append("echo %s" % msg, fatal=False) |
| else: |
| self.append("echo %s%s" % (r"\\c", msg), fatal=False) |
| |
| if not verbose: |
| self.redirect("nulldev") |
| |
| def end(self): |
| """Generate code, to indicate successful completion of script.""" |
| |
| self.append("exit 0\n", fatal=False) |
| |
| def start_if(self, var, value): |
| """Generate code, to check an environment variable. |
| |
| var -- string, variable to check |
| value -- string, the value to compare with |
| """ |
| |
| self.append('if test "$%s" = "%s"; then\n' % (var, value), |
| fatal=False) |
| |
| def end_if(self): |
| """Generate code, to end if statement.""" |
| |
| self.append('fi\n', fatal=False) |
| |
| class Flash_Script(FlashScript): |
| """Class for creating NAND flash scripts.""" |
| |
| def __init__(self, *args): |
| FlashScript.__init__(self, args[0]) |
| if args[0].type == "nand": |
| self.ipq_nand = args[1] |
| elif args[0].type == "nor" or args[0].type == "norplusnand": |
| self.nand_pagesize = args[1] |
| |
| def erase(self, offset, size): |
| """Generate code, to erase the specified partition.""" |
| |
| if self.flash_type != "emmc": |
| size = roundup(size, self.blocksize) |
| |
| if self.flash_type == "nand": |
| self.append("nand device 0 && nand erase 0x%08x 0x%08x" % (offset, size)) |
| elif self.flash_type == "nor": |
| self.append("sf erase 0x%08x +0x%08x" % (offset, size)) |
| elif self.flash_type == "emmc": |
| self.append("mmc erase 0x%08x %x" % (offset, size)) |
| |
| def nand_write(self, offset, part_size, img_size, spi_nand): |
| """Handle the NOR + NAND case |
| All binaries upto HLOS will go to NOR and Root FS will go to NAND |
| Assumed all nand page sizes are less than are equal to 8KB |
| """ |
| |
| if spi_nand == "true": |
| self.append("nand device 1 && nand erase 0x%08x 0x%08x" % (offset, part_size)) |
| else: |
| self.append("nand device 0 && nand erase 0x%08x 0x%08x" % (offset, part_size)) |
| |
| if img_size > 0: |
| self.append("nand write $fileaddr 0x%08x 0x%08x" % (offset, img_size)) |
| |
| def write(self, offset, size): |
| """Generate code, to write to a partition.""" |
| |
| if self.flash_type == "nand": |
| if size > 0: |
| size = roundup(size, self.pagesize) |
| self.append("nand write $fileaddr 0x%08x 0x%08x" % (offset, size)) |
| |
| elif self.flash_type == "nor": |
| if size > 0: |
| self.append("sf write $fileaddr 0x%08x 0x%08x" % (offset, size)) |
| |
| elif self.flash_type == "emmc": |
| if size > 0: |
| size = roundup(size, self.blocksize) |
| blk_cnt = size / self.blocksize |
| self.append("mmc write $fileaddr 0x%08x %x" % (offset, blk_cnt)) |
| |
| def probe(self): |
| if self.flash_type == "nand": |
| pass |
| elif self.flash_type == "nor": |
| self.append("sf probe") |
| else: |
| pass |
| |
| def switch_layout(self, layout): |
| if self.flash_type == "nand": |
| self.append("ipq_nand %s" % layout) |
| else: |
| pass |
| |
| its_tmpl = Template(""" |
| /dts-v1/; |
| |
| / { |
| description = "${desc}"; |
| images { |
| ${images} |
| }; |
| }; |
| """) |
| |
| its_image_tmpl = Template(""" |
| ${name} { |
| description = "${desc}"; |
| data = /incbin/("./${fname}"); |
| type = "${imtype}"; |
| arch = "arm"; |
| compression = "none"; |
| hash@1 { algo = "crc32"; }; |
| }; |
| """) |
| |
| def sha1(message): |
| """Returns SHA1 digest in hex format of the message.""" |
| |
| m = hashlib.sha1() |
| m.update(message) |
| return m.hexdigest() |
| |
| class Pack(object): |
| """Class to create a flashable, multi-image blob. |
| |
| Combine multiple images present in a directory, and generate a |
| U-Boot script to flash the images. |
| """ |
| # The maximum rootfs size is 64MB |
| norplusnand_rootfs_img_size = (64 * 1024 * 1024) |
| |
| def __init__(self): |
| self.flinfo = None |
| self.images_dname = None |
| self.ipq_nand = None |
| self.partitions = {} |
| |
| self.fconf_fname = None |
| self.scr_fname = None |
| self.its_fname = None |
| self.img_fname = None |
| self.emmc_page_size = 512 |
| self.emmc_block_size = 512 |
| |
| def __get_machid(self, section): |
| """Get the machid for a section. |
| |
| info -- ConfigParser object, containing image flashing info |
| section -- section to retreive the machid from |
| """ |
| try: |
| machid = int(section.find("./machid").text, 0) |
| machid = "%x" % machid |
| except ValueError, e: |
| error("invalid value for machid, should be integer") |
| |
| return machid |
| |
| def __get_img_size(self, filename): |
| """Get the size of the image to be flashed |
| |
| filaneme -- string, filename of the image to be flashed |
| """ |
| |
| if filename.lower() == "none": |
| return 0 |
| try: |
| return getsize(os.path.join(self.images_dname, filename)) |
| except OSError, e: |
| error("error getting image size '%s'" % filename, e) |
| |
| def __get_part_info(self, partition): |
| """Return partition info for the specified partition. |
| |
| partition -- string, partition name |
| """ |
| try: |
| return self.partitions[partition] |
| except KeyError, e: |
| return None |
| |
| def __gen_flash_script_cdt(self, entries, partition, flinfo, script): |
| global ARCH_NAME |
| for section in entries: |
| |
| machid = int(section.find(".//machid").text, 0) |
| machid = "%x" % machid |
| board = section.find(".//board").text |
| spi_nand = section.find(".//spi_nand").text |
| if ARCH_NAME != "ipq806x": |
| try: |
| memory = section.find(".//memory").text |
| except AttributeError, e: |
| memory = "128M16" |
| filename = "cdt-" + board + "_" + memory + ".bin" |
| else: |
| filename = "cdt-" + board + ".bin" |
| |
| img_size = self.__get_img_size(filename) |
| part_info = self.__get_part_info(partition) |
| |
| section_label = partition.split(":") |
| if len(section_label) != 1: |
| section_conf = section_label[1] |
| else: |
| section_conf = section_label[0] |
| |
| section_conf = section_conf.lower() |
| |
| if self.flinfo.type == 'nand': |
| size = roundup(img_size, flinfo.pagesize) |
| tr = ' | tr \"\\000\" \"\\377\"' |
| |
| if self.flinfo.type == 'emmc': |
| size = roundup(img_size, flinfo.blocksize) |
| tr = '' |
| |
| if ((self.flinfo.type == 'nand' or self.flinfo.type == 'emmc') and (size != img_size)): |
| pad_size = size - img_size |
| filename_abs = os.path.join(self.images_dname, filename) |
| filename_abs_pad = filename_abs + ".padded" |
| cmd = 'cat %s > %s' % (filename_abs, filename_abs_pad) |
| ret = subprocess.call(cmd, shell=True) |
| if ret != 0: |
| error("failed to copy image") |
| cmd = 'dd if=/dev/zero count=1 bs=%s %s >> %s' % (pad_size, tr, filename_abs_pad) |
| cmd = '(' + cmd + ') 1>/dev/null 2>/dev/null' |
| ret = subprocess.call(cmd, shell=True) |
| if ret != 0: |
| error("failed to create padded image from script") |
| |
| if self.flinfo.type != "emmc": |
| if part_info == None: |
| if self.flinfo.type == 'norplusnand': |
| if count > 2: |
| error("More than 2 NAND images for NOR+NAND is not allowed") |
| elif img_size > part_info.length: |
| error("img size is larger than part. len in '%s'" % section_conf) |
| else: |
| if part_info != None: |
| if (img_size > 0): |
| if img_size > (part_info.length * self.flinfo.blocksize): |
| error("img size is larger than part. len in '%s'" % section_conf) |
| |
| if part_info == None and self.flinfo.type != 'norplusnand': |
| print "Flash type is norplusemmc" |
| continue |
| |
| if machid: |
| script.start_if("machid", machid) |
| if ARCH_NAME != "ipq806x": |
| script.start_activity("Flashing ddr-%s_%s:" % ( board, memory )) |
| if img_size > 0: |
| filename_pad = filename + ".padded" |
| if ((self.flinfo.type == 'nand' or self.flinfo.type == 'emmc') and (size != img_size)): |
| script.imxtract("ddr-" + board + "_" + memory + "-" + sha1(filename_pad)) |
| else: |
| script.imxtract("ddr-" + board + "_" + memory + "-" + sha1(filename)) |
| """ script.imxtract("cdt-" + board + "_" + memory + ".bin-" + sha1(filename_pad)) |
| else: |
| script.imxtract("cdt-" + board + "_" + memory + ".bin-" + sha1(filename)) """ |
| |
| else: |
| script.start_activity("Flashing ddr-%s:" % (board)) |
| script.switch_layout("sbl") |
| if img_size > 0: |
| filename_pad = filename + ".padded" |
| if ((self.flinfo.type == 'nand' or self.flinfo.type == 'emmc') and (size != img_size)): |
| script.imxtract("ddr-" + board + "-" + sha1(filename_pad)) |
| else: |
| script.imxtract("ddr-" + board + "-" + sha1(filename)) |
| """ script.imxtract("cdt-" + board + ".bin-" + sha1(filename_pad)) |
| else: |
| script.imxtract("cdt-" + board + ".bin-" + sha1(filename)) """ |
| |
| part_size = Pack.norplusnand_rootfs_img_size |
| if part_info == None: |
| if self.flinfo.type == 'norplusnand': |
| offset = count * Pack.norplusnand_rootfs_img_size |
| script.nand_write(offset, part_size, img_size, spi_nand) |
| count = count + 1 |
| else: |
| if part_info.which_flash == 0: |
| offset = part_info.offset |
| script.erase(offset, part_info.length) |
| script.write(offset, img_size) |
| else: |
| offset = part_info.offset |
| script.nand_write(offset, part_info.length, img_size, spi_nand) |
| |
| script.finish_activity() |
| |
| if machid: |
| script.end_if() |
| |
| def __gen_flash_script(self, script, flinfo, root): |
| """Generate the script to flash the images. |
| |
| info -- ConfigParser object, containing image flashing info |
| script -- Script object, to append commands to |
| """ |
| global MODE |
| global SRC_DIR |
| global ARCH_NAME |
| |
| diff_files = "" |
| count = 0 |
| |
| if self.flash_type == "norplusemmc" and flinfo.type == "emmc": |
| srcDir_part = SRC_DIR + "/" + ARCH_NAME + "/flash_partition/" + flinfo.type + "-partition.xml" |
| else: |
| srcDir_part = SRC_DIR + "/" + ARCH_NAME + "/flash_partition/" + self.flash_type.lower() + "-partition.xml" |
| |
| root_part = ET.parse(srcDir_part) |
| if self.flash_type != "emmc" and flinfo.type != "emmc": |
| parts = root_part.findall(".//partitions/partition") |
| elif self.flash_type != "emmc" and flinfo.type == "emmc": |
| parts = root_part.findall(".//physical_partition[@ref='norplusemmc']/partition") |
| else: |
| parts = root_part.findall(".//physical_partition[@ref='emmc']/partition") |
| if flinfo.type == "emmc": |
| parts_length = len(parts) + 2 |
| else: |
| parts_length = len(parts) |
| entries = root.findall(".//data[@type='MACH_ID_BOARD_MAP']/entry") |
| |
| first = False |
| section = None |
| part_index = 0 |
| |
| if flinfo.type == "emmc": |
| first = True |
| |
| for index in range(parts_length): |
| |
| if first: |
| if self.flash_type == "norplusemmc": |
| part_info = root.find(".//data[@type='NORPLUSEMMC_PARAMETER']") |
| else: |
| part_info = root.find(".//data[@type='EMMC_PARAMETER']") |
| part_fname = part_info.find(".//partition_mbn") |
| filename = part_fname.text |
| partition = "0:GPT" |
| first = False |
| |
| elif index == (parts_length - 1) and flinfo.type == "emmc": |
| if self.flash_type == "norplusemmc": |
| part_info = root.find(".//data[@type='NORPLUSEMMC_PARAMETER']") |
| else: |
| part_info = root.find(".//data[@type='EMMC_PARAMETER']") |
| part_fname = part_info.find(".//partition_mbn_backup") |
| filename = part_fname.text |
| partition = "0:GPTBACKUP" |
| |
| else: |
| section = parts[part_index] |
| part_index += 1 |
| if flinfo.type != "emmc": |
| try: |
| filename = section[8].text |
| try: |
| if section[8].attrib['mode'] != MODE: |
| filename = section[9].text |
| else: |
| pass |
| except AttributeError, e: |
| pass |
| except KeyError, e: |
| pass |
| except IndexError, e: |
| if index == (parts_length - 1): |
| return |
| else: |
| continue |
| partition = section[0].text |
| else: |
| try: |
| diff_files = section.attrib['diff_files'] |
| except KeyError, e: |
| try: |
| filename = section.attrib['filename'] |
| partition = section.attrib['label'] |
| if filename == "": |
| continue |
| except KeyError, e: |
| error("Error getting image info in section '%s'" % section.attrib['label'], e) |
| |
| if diff_files == "true": |
| try: |
| filename = section.attrib['filename_' + MODE] |
| partition = section.attrib['label'] |
| if filename == "": |
| continue |
| except KeyError, e: |
| error("Error getting image info in section '%s'" % section.attrib['label'], e) |
| diff_files = "" # Clear for next iteration |
| |
| # Get machID |
| if partition != "0:CDT" and partition != "0:DDRCONFIG": |
| machid = None |
| else: |
| self.__gen_flash_script_cdt(entries, partition, flinfo, script) |
| continue |
| |
| if ARCH_NAME == "ipq806x": |
| # Get Layout |
| try: |
| layout = section[9].text |
| except: |
| layout = None |
| |
| if layout not in ("sbl", "linux", None): |
| error("invalid layout in '%s'" % section) |
| |
| img_size = self.__get_img_size(filename) |
| part_info = self.__get_part_info(partition) |
| |
| section_label = partition.split(":") |
| if len(section_label) != 1: |
| section_conf = section_label[1] |
| else: |
| section_conf = section_label[0] |
| |
| section_conf = section_conf.lower() |
| spi_nand = False |
| |
| if self.flinfo.type == 'nand': |
| size = roundup(img_size, flinfo.pagesize) |
| tr = ' | tr \"\\000\" \"\\377\"' |
| |
| if self.flinfo.type == 'emmc': |
| size = roundup(img_size, flinfo.blocksize) |
| tr = '' |
| |
| if ((self.flinfo.type == 'nand' or self.flinfo.type == 'emmc') and (size != img_size)): |
| pad_size = size - img_size |
| filename_abs = os.path.join(self.images_dname, filename) |
| filename_abs_pad = filename_abs + ".padded" |
| cmd = 'cat %s > %s' % (filename_abs, filename_abs_pad) |
| ret = subprocess.call(cmd, shell=True) |
| if ret != 0: |
| error("failed to copy image") |
| cmd = 'dd if=/dev/zero count=1 bs=%s %s >> %s' % (pad_size, tr, filename_abs_pad) |
| cmd = '(' + cmd + ') 1>/dev/null 2>/dev/null' |
| ret = subprocess.call(cmd, shell=True) |
| if ret != 0: |
| error("failed to create padded image from script") |
| |
| if self.flinfo.type != "emmc": |
| if part_info == None: |
| if self.flinfo.type == 'norplusnand': |
| if count > 2: |
| error("More than 2 NAND images for NOR+NAND is not allowed") |
| elif img_size > part_info.length: |
| error("img size is larger than part. len in '%s'" % section_conf) |
| else: |
| if part_info != None: |
| if (img_size > 0): |
| if img_size > (part_info.length * self.flinfo.blocksize): |
| error("img size is larger than part. len in '%s'" % section_conf) |
| |
| if part_info == None and self.flinfo.type != 'norplusnand': |
| print "Flash type is norplusemmc" |
| continue |
| |
| if machid: |
| script.start_if("machid", machid) |
| |
| if section_conf == "qsee": |
| section_conf = "tz" |
| elif section_conf == "appsbl": |
| section_conf = "u-boot" |
| elif section_conf == "rootfs" and (self.flash_type == "nand" or self.flash_type == "norplusnand"): |
| section_conf = "ubi" |
| |
| script.start_activity("Flashing %s:" % section_conf) |
| |
| if ARCH_NAME == "ipq806x": |
| script.switch_layout(layout) |
| if img_size > 0: |
| filename_pad = filename + ".padded" |
| if ((self.flinfo.type == 'nand' or self.flinfo.type == 'emmc') and (size != img_size)): |
| script.imxtract(section_conf + "-" + sha1(filename_pad)) |
| else: |
| script.imxtract(section_conf + "-" + sha1(filename)) |
| |
| part_size = Pack.norplusnand_rootfs_img_size |
| if part_info == None: |
| if self.flinfo.type == 'norplusnand': |
| offset = count * Pack.norplusnand_rootfs_img_size |
| img_size = Pack.norplusnand_rootfs_img_size |
| script.nand_write(offset, part_size, img_size, spi_nand) |
| count = count + 1 |
| else: |
| if part_info.which_flash == 0: |
| offset = part_info.offset |
| script.erase(offset, part_info.length) |
| script.write(offset, img_size) |
| else: |
| offset = part_info.offset |
| script.nand_write(offset, part_info.length, img_size, spi_nand) |
| |
| script.finish_activity() |
| |
| if machid: |
| script.end_if() |
| |
| def __gen_script_cdt(self, images, flinfo, root, section_conf, partition): |
| global ARCH_NAME |
| |
| entries = root.findall(".//data[@type='MACH_ID_BOARD_MAP']/entry") |
| |
| for section in entries: |
| |
| board = section.find(".//board").text |
| if ARCH_NAME != "ipq806x": |
| try: |
| memory = section.find(".//memory").text |
| except AttributeError, e: |
| memory = "128M16" |
| |
| filename = "cdt-" + board + "_" + memory + ".bin" |
| file_info = "ddr-" + board + "_" + memory |
| else: |
| filename = "cdt-" + board + ".bin" |
| file_info = "ddr-" + board |
| |
| part_info = self.__get_part_info(partition) |
| |
| if part_info == None and self.flinfo.type != 'norplusnand': |
| continue |
| |
| if self.flinfo.type == 'nand': |
| img_size = self.__get_img_size(filename) |
| size = roundup(img_size, flinfo.pagesize) |
| if ( size != img_size ): |
| filename = filename + ".padded" |
| if self.flinfo.type == 'emmc': |
| img_size = self.__get_img_size(filename) |
| size = roundup(img_size, flinfo.blocksize) |
| if ( size != img_size ): |
| filename = filename + ".padded" |
| image_info = ImageInfo(file_info + "-" + sha1(filename), |
| filename, "firmware") |
| if filename.lower() != "none": |
| if image_info not in images: |
| images.append(image_info) |
| |
| def __gen_script(self, script_fp, script, images, flinfo, root): |
| """Generate the script to flash the multi-image blob. |
| |
| script_fp -- file object, to write script to |
| info_fp -- file object, to read flashing information from |
| script -- Script object, to append the commands to |
| images -- list of ImageInfo, appended to, based on images in config |
| """ |
| global MODE |
| global SRC_DIR |
| |
| diff_files = "" |
| self.__gen_flash_script(script, flinfo, root) |
| if (self.flash_type == "norplusemmc" and flinfo.type == "emmc") or (self.flash_type != "norplusemmc"): |
| if flinfo.type == "emmc": |
| script.start_activity("Flashing rootfs_data:") |
| part_info = self.partitions["rootfs_data"] |
| script.erase(part_info.offset, part_info.length) |
| script.finish_activity() |
| script.end() |
| |
| if self.flash_type == "norplusemmc" and flinfo.type == "emmc": |
| srcDir_part = SRC_DIR + "/" + ARCH_NAME + "/flash_partition/" + flinfo.type + "-partition.xml" |
| else: |
| srcDir_part = SRC_DIR + "/" + ARCH_NAME + "/flash_partition/" + self.flash_type.lower() + "-partition.xml" |
| root_part = ET.parse(srcDir_part) |
| if self.flash_type != "emmc" and flinfo.type != "emmc": |
| parts = root_part.findall(".//partitions/partition") |
| elif self.flash_type != "emmc" and flinfo.type == "emmc": |
| parts = root_part.findall(".//physical_partition[@ref='norplusemmc']/partition") |
| else: |
| parts = root_part.findall(".//physical_partition[@ref='emmc']/partition") |
| if flinfo.type == "emmc": |
| parts_length = len(parts) + 2 |
| else: |
| parts_length = len(parts) |
| |
| first = False |
| section = None |
| part_index = 0 |
| |
| if flinfo.type == "emmc": |
| first = True |
| |
| for index in range(parts_length): |
| |
| if first: |
| if self.flash_type == "norplusemmc": |
| part_info = root.find(".//data[@type='NORPLUSEMMC_PARAMETER']") |
| else: |
| part_info = root.find(".//data[@type='EMMC_PARAMETER']") |
| part_fname = part_info.find(".//partition_mbn") |
| filename = part_fname.text |
| partition = "0:GPT" |
| first = False |
| |
| elif index == (parts_length - 1) and flinfo.type == "emmc": |
| if self.flash_type == "norplusemmc": |
| part_info = root.find(".//data[@type='NORPLUSEMMC_PARAMETER']") |
| else: |
| part_info = root.find(".//data[@type='EMMC_PARAMETER']") |
| part_fname = part_info.find(".//partition_mbn_backup") |
| filename = part_fname.text |
| partition = "0:GPTBACKUP" |
| |
| else: |
| section = parts[part_index] |
| part_index += 1 |
| if flinfo.type != "emmc": |
| try: |
| filename = section[8].text |
| try: |
| if section[8].attrib['mode'] != MODE: |
| filename = section[9].text |
| except AttributeError, e: |
| pass |
| except KeyError, e: |
| pass |
| except IndexError, e: |
| if index == (parts_length - 1): |
| return |
| else: |
| continue |
| partition = section[0].text |
| else: |
| |
| try: |
| diff_files = section.attrib['diff_files'] |
| except KeyError, e: |
| try: |
| filename = section.attrib['filename'] |
| partition = section.attrib['label'] |
| if filename == "": |
| continue |
| except KeyError, e: |
| error("Error getting image info in section '%s'" % section.attrib['label'], e) |
| |
| if diff_files == "true": |
| try: |
| filename = section.attrib['filename_' + MODE] |
| partition = section.attrib['label'] |
| if filename == "": |
| continue |
| |
| except KeyError, e: |
| error("Error getting image info in section '%s'" % section.attrib['label'], e) |
| diff_files = "" # Clear for next iteration |
| |
| part_info = self.__get_part_info(partition) |
| |
| section_label = partition.split(":") |
| if len(section_label) != 1: |
| section_conf = section_label[1] |
| else: |
| section_conf = section_label[0] |
| |
| section_conf = section_conf.lower() |
| |
| if section_conf == "cdt" or section_conf == "ddrconfig": |
| self.__gen_script_cdt(images, flinfo, root, section_conf, partition) |
| continue |
| |
| if part_info == None and self.flinfo.type != 'norplusnand': |
| continue |
| |
| if self.flinfo.type == 'nand': |
| img_size = self.__get_img_size(filename) |
| size = roundup(img_size, flinfo.pagesize) |
| if ( size != img_size ): |
| filename = filename + ".padded" |
| if self.flinfo.type == 'emmc': |
| img_size = self.__get_img_size(filename) |
| size = roundup(img_size, flinfo.blocksize) |
| if ( size != img_size ): |
| filename = filename + ".padded" |
| if section_conf == "qsee": |
| section_conf = "tz" |
| elif section_conf == "appsbl": |
| section_conf = "u-boot" |
| elif section_conf == "rootfs" and (self.flash_type == "nand" or self.flash_type == "norplusnand"): |
| section_conf = "ubi" |
| image_info = ImageInfo(section_conf + "-" + sha1(filename), |
| filename, "firmware") |
| if filename.lower() != "none": |
| if image_info not in images: |
| images.append(image_info) |
| |
| def __mkimage(self, images): |
| """Create the multi-image blob. |
| |
| images -- list of ImageInfo, containing images to be part of the blob |
| """ |
| try: |
| its_fp = open(self.its_fname, "wb") |
| except IOError, e: |
| error("error opening its file '%s'" % self.its_fname, e) |
| |
| desc = "Flashing %s %x %x" |
| desc = desc % (self.flinfo.type, self.flinfo.pagesize, |
| self.flinfo.blocksize) |
| |
| image_data = [] |
| for (section, fname, imtype) in images: |
| fname = fname.replace("\\", "\\\\") |
| subs = dict(name=section, desc=fname, fname=fname, imtype=imtype) |
| image_data.append(its_image_tmpl.substitute(subs)) |
| |
| image_data = "".join(image_data) |
| its_data = its_tmpl.substitute(desc=desc, images=image_data) |
| |
| its_fp.write(its_data) |
| its_fp.close() |
| |
| try: |
| cmd = ["mkimage", "-f", self.its_fname, self.img_fname] |
| ret = subprocess.call(cmd) |
| if ret != 0: |
| print ret |
| error("failed to create u-boot image from script") |
| except OSError, e: |
| error("error executing mkimage", e) |
| |
| def __create_fnames(self): |
| """Populate the filenames.""" |
| |
| self.scr_fname = os.path.join(self.images_dname, "flash.scr") |
| self.its_fname = os.path.join(self.images_dname, "flash.its") |
| |
| def __gen_board_script(self, flinfo, part_fname, images, root): |
| global SRC_DIR |
| global ARCH_NAME |
| |
| """Generate the flashing script for one board. |
| |
| board_section -- string, board section in board config file |
| machid -- string, board machine ID in hex format |
| flinfo -- FlashInfo object, contains board specific flash params |
| part_fname -- string, partition file specific to the board |
| fconf_fname -- string, flash config file specific to the board |
| images -- list of ImageInfo, append images used by the board here |
| """ |
| script_fp = open(self.scr_fname, "a") |
| |
| if flinfo.type != "emmc": |
| flash_param = root.find(".//data[@type='NAND_PARAMETER']") |
| pagesize = int(flash_param.find(".//page_size").text) |
| pages_per_block = int(flash_param.find(".//pages_per_block").text) |
| blocksize = pages_per_block * pagesize |
| blocks_per_chip = int(flash_param.find(".//total_block").text) |
| chipsize = blocks_per_chip * blocksize |
| |
| srcDir_part = SRC_DIR + "/" + ARCH_NAME + "/flash_partition/" + flinfo.type + "-partition.xml" |
| root_part = ET.parse(srcDir_part) |
| mibib = MIBIB(part_fname, flinfo.pagesize, flinfo.blocksize, |
| flinfo.chipsize, blocksize, chipsize, root_part) |
| self.partitions = mibib.get_parts() |
| if flinfo.type == "nand": |
| script = Flash_Script(flinfo, self.ipq_nand) |
| elif flinfo.type == "nor": |
| script = Flash_Script(flinfo, pagesize) |
| else: |
| gpt = GPT(part_fname, flinfo.pagesize, flinfo.blocksize, flinfo.chipsize) |
| self.partitions = gpt.get_parts() |
| script = Flash_Script(flinfo) |
| |
| self.flinfo = flinfo |
| |
| script.probe() |
| self.__gen_script(script_fp, script, images, flinfo, root) |
| |
| try: |
| script_fp.write(script.dumps()) |
| except IOError, e: |
| error("error writing to script '%s'" % script_fp.name, e) |
| |
| script_fp.close() |
| |
| def __process_board_flash_emmc(self, ftype, images, root): |
| """Extract board info from config and generate the flash script. |
| |
| ftype -- string, flash type 'emmc' |
| board_section -- string, board section in config file |
| machid -- string, board machine ID in hex format |
| images -- list of ImageInfo, append images used by the board here |
| """ |
| |
| try: |
| part_info = root.find(".//data[@type='" + self.flash_type.upper() + "_PARAMETER']") |
| part_fname = part_info.find(".//partition_mbn") |
| part_fname = part_fname.text |
| part_fname = os.path.join(self.images_dname, part_fname) |
| if ftype == "norplusemmc": |
| part_info = root.find(".//data[@type='NORPLUSEMMC_PARAMETER']") |
| pagesize = int(part_info.find(".//page_size_flash").text) |
| part_info = root.find(".//data[@type='EMMC_PARAMETER']") |
| else: |
| pagesize = self.emmc_page_size |
| blocksize = self.emmc_block_size |
| chipsize = int(part_info.find(".//total_block").text) |
| if ftype.lower() == "norplusemmc": |
| ftype = "emmc" |
| |
| except ValueError, e: |
| error("invalid flash info in section '%s'" % board_section.find('machid').text, e) |
| |
| flinfo = FlashInfo(ftype, pagesize, blocksize, chipsize) |
| |
| self.__gen_board_script(flinfo, part_fname, images, root) |
| |
| def __process_board_flash(self, ftype, images, root): |
| global SRC_DIR |
| global ARCH_NAME |
| |
| try: |
| part_info = root.find(".//data[@type='" + ftype.upper() + "_PARAMETER']") |
| part_file = SRC_DIR + "/" + ARCH_NAME + "/flash_partition/" + ftype + "-partition.xml" |
| part_xml = ET.parse(part_file) |
| partition = part_xml.find(".//partitions/partition[2]") |
| part_fname = partition[8].text |
| part_fname = os.path.join(self.images_dname, part_fname) |
| pagesize = int(part_info.find(".//page_size").text) |
| pages_per_block = int(part_info.find(".//pages_per_block").text) |
| blocks_per_chip = int(part_info.find(".//total_block").text) |
| |
| if ftype == "norplusnand" or ftype == "norplusemmc": |
| ftype = "nor" |
| |
| except ValueError, e: |
| error("invalid flash info in section '%s'" % board_section.find('machid').text, e) |
| |
| blocksize = pages_per_block * pagesize |
| chipsize = blocks_per_chip * blocksize |
| |
| flinfo = FlashInfo(ftype, pagesize, blocksize, chipsize) |
| |
| self.__gen_board_script(flinfo, part_fname, images, root) |
| |
| def __process_board(self, images, root): |
| |
| try: |
| if self.flash_type in [ "nand", "nor", "norplusnand" ]: |
| self.__process_board_flash(self.flash_type, images, root) |
| elif self.flash_type == "emmc": |
| self.__process_board_flash_emmc(self.flash_type, images, root) |
| elif self.flash_type == "norplusemmc": |
| self.__process_board_flash("norplusemmc", images, root) |
| self.__process_board_flash_emmc("norplusemmc", images, root) |
| except ValueError, e: |
| error("error getting board info in section '%s'" % board_section.find('machid').text, e) |
| |
| def main_bconf(self, flash_type, images_dname, out_fname, root): |
| """Start the packing process, using board config. |
| |
| flash_type -- string, indicates flash type, 'nand' or 'nor' or 'emmc' or 'norplusnand' |
| images_dname -- string, name of images directory |
| out_fname -- string, output file path |
| """ |
| self.flash_type = flash_type |
| self.images_dname = images_dname |
| self.img_fname = out_fname |
| |
| self.__create_fnames() |
| try: |
| os.unlink(self.scr_fname) |
| except OSError, e: |
| pass |
| |
| images = [] |
| self.__process_board(images, root) |
| images.insert(0, ImageInfo("script", "flash.scr", "script")) |
| self.__mkimage(images) |
| |
| class UsageError(Exception): |
| """Indicates error in command arguments.""" |
| pass |
| |
| class ArgParser(object): |
| """Class to parse command-line arguments.""" |
| |
| DEFAULT_TYPE = "nor,nand,norplusnand,emmc,norplusemmc" |
| |
| def __init__(self): |
| self.flash_type = None |
| self.images_dname = None |
| self.out_dname = None |
| self.scr_fname = None |
| self.its_fname = None |
| |
| def parse(self, argv): |
| global MODE |
| global SRC_DIR |
| global ARCH_NAME |
| |
| """Start the parsing process, and populate members with parsed value. |
| |
| argv -- list of string, the command line arguments |
| """ |
| |
| cdir = os.path.abspath(os.path.dirname("")) |
| if len(sys.argv) > 1: |
| try: |
| opts, args = getopt(sys.argv[1:], "", ["arch=", "fltype=", "srcPath=", "inImage=", "outImage="]) |
| except GetoptError, e: |
| raise UsageError(e.msg) |
| |
| for option, value in opts: |
| if option == "--arch": |
| ARCH_NAME = value |
| |
| elif option == "--fltype": |
| self.flash_type = value |
| |
| elif option == "--srcPath": |
| SRC_DIR = os.path.abspath(value) |
| |
| elif option == "--inImage": |
| self.images_dname = os.path.join(cdir, value) |
| |
| elif option == "--outImage": |
| self.out_dname = os.path.join(cdir, value) |
| |
| #Verify Arguments passed by user |
| |
| # Verify arch type |
| if ARCH_NAME not in ["ipq40xx", "ipq806x", "ipq807x", "ipq807x_64"]: |
| raise UsageError("Invalid arch type '%s'" % arch) |
| |
| if ARCH_NAME == "ipq807x": |
| MODE = "32" |
| elif ARCH_NAME == "ipq807x_64": |
| MODE = "64" |
| ARCH_NAME = "ipq807x" |
| |
| # Set flash type to default type (nand) if not given by user |
| if self.flash_type == None: |
| self.flash_type = ArgParser.DEFAULT_TYPE |
| for flash_type in self.flash_type.split(","): |
| if flash_type not in [ "nand", "nor", "emmc", "norplusnand", "norplusemmc" ]: |
| raise UsageError("invalid flash type '%s'" % flash_type) |
| |
| # Verify src Path |
| if SRC_DIR == "": |
| raise UsageError("Source Path is not provided") |
| |
| #Verify input image path |
| if self.images_dname == None: |
| raise UsageError("input images' Path is not provided") |
| |
| #Verify Output image path |
| if self.out_dname == None: |
| raise UsageError("Output Path is not provided") |
| |
| def usage(self, msg): |
| """Print error message and command usage information. |
| |
| msg -- string, the error message |
| """ |
| print "pack: %s" % msg |
| print |
| print "Usage:" |
| print "python pack_hk.py [options] [Value] ..." |
| print |
| print "options:" |
| print " --arch \tARCH_TYPE [ipq40xx/ipq806x/ipq807x/ipq807x_64]" |
| print |
| print " --fltype \tFlash Type [nor/nand/emmc/norplusnand/norplusemmc]" |
| print " \t\tMultiple flashtypes can be passed by a comma separated string" |
| print " \t\tDefault is all. i.e If \"--fltype\" is not passed image for all the flash-type will be created.\n" |
| print " --srcPath \tPath to the directory containg the meta scripts and configs" |
| print |
| print " --inImage \tPath to the direcory containg binaries and images needed for singleimage" |
| print |
| print " --outImage \tPath to the directory where single image will be generated" |
| print |
| print "Pack Version: %s" % version |
| |
| def main(): |
| """Main script entry point. |
| |
| Created to avoid polluting the global namespace. |
| """ |
| try: |
| parser = ArgParser() |
| parser.parse(sys.argv) |
| except UsageError, e: |
| parser.usage(e.args[0]) |
| sys.exit(1) |
| |
| pack = Pack() |
| |
| if not os.path.exists(parser.out_dname): |
| os.makedirs(parser.out_dname) |
| |
| config = SRC_DIR + "/" + ARCH_NAME + "/config.xml" |
| root = ET.parse(config) |
| |
| # Format the output image name from Arch, flash type and mode |
| for flash_type in parser.flash_type.split(","): |
| if MODE == "64": |
| parser.out_fname = flash_type + "-" + ARCH_NAME + "_" + MODE + "-single.img" |
| else: |
| parser.out_fname = flash_type + "-" + ARCH_NAME + "-single.img" |
| |
| parser.out_fname = os.path.join(parser.out_dname, parser.out_fname) |
| |
| pack.main_bconf(flash_type, parser.images_dname, |
| parser.out_fname, root) |
| |
| if __name__ == "__main__": |
| main() |