| /* |
| ************************************************************************** |
| * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved. |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all copies. |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT |
| * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| ************************************************************************** |
| */ |
| |
| /* |
| * nss_init.c |
| * NSS init APIs |
| * |
| */ |
| #include "nss_core.h" |
| #if (NSS_PM_SUPPORT == 1) |
| #include "nss_pm.h" |
| #endif |
| #include "nss_tx_rx_common.h" |
| #include "nss_data_plane.h" |
| #include "nss_capwap.h" |
| #include "nss_strings.h" |
| |
| #include <nss_hal.h> |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/proc_fs.h> |
| #include <linux/device.h> |
| |
| #if (NSS_DT_SUPPORT == 1) |
| #if (NSS_FABRIC_SCALING_SUPPORT == 1) |
| #include <linux/fab_scaling.h> |
| #endif |
| #include <linux/of.h> |
| #include <linux/of_net.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_address.h> |
| #include <linux/reset.h> |
| #else |
| #include <mach/msm_nss.h> |
| #endif |
| |
| #include <linux/sysctl.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/clk.h> |
| |
| /* |
| * Global declarations |
| */ |
| int nss_ctl_redirect __read_mostly = 0; |
| int nss_ctl_debug __read_mostly = 0; |
| int nss_ctl_logbuf __read_mostly = 0; |
| int nss_jumbo_mru __read_mostly = 0; |
| int nss_paged_mode __read_mostly = 0; |
| #if (NSS_SKB_REUSE_SUPPORT == 1) |
| int nss_max_reuse __read_mostly = PAGE_SIZE; |
| #endif |
| int nss_skip_nw_process = 0x0; |
| module_param(nss_skip_nw_process, int, S_IRUGO); |
| |
| /* |
| * PM client handle |
| */ |
| #if (NSS_PM_SUPPORT == 1) |
| static void *pm_client; |
| #endif |
| |
| /* |
| * Handler to send NSS messages |
| */ |
| struct clk *nss_core0_clk; |
| struct clk *nss_core1_clk; |
| |
| /* |
| * Handle fabric requests - only on new kernel |
| */ |
| #if (NSS_DT_SUPPORT == 1) |
| struct clk *nss_fab0_clk; |
| struct clk *nss_fab1_clk; |
| #endif |
| |
| /* |
| * Top level nss context structure |
| */ |
| struct nss_top_instance nss_top_main; |
| struct nss_cmd_buffer nss_cmd_buf; |
| struct nss_runtime_sampling nss_runtime_samples; |
| struct workqueue_struct *nss_wq; |
| |
| /* |
| * Work Queue to handle messages to Kernel |
| */ |
| nss_work_t *nss_work; |
| |
| extern struct of_device_id nss_dt_ids[]; |
| |
| /* |
| * nss_probe() |
| * HLOS device probe callback |
| */ |
| static inline int nss_probe(struct platform_device *nss_dev) |
| { |
| return nss_hal_probe(nss_dev); |
| } |
| |
| /* |
| * nss_remove() |
| * HLOS device remove callback |
| */ |
| static inline int nss_remove(struct platform_device *nss_dev) |
| { |
| return nss_hal_remove(nss_dev); |
| } |
| |
| #if (NSS_DT_SUPPORT == 1) |
| /* |
| * Platform Device ID for NSS core. |
| */ |
| struct of_device_id nss_dt_ids[] = { |
| { .compatible = "qcom,nss" }, |
| { .compatible = "qcom,nss0" }, |
| { .compatible = "qcom,nss1" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, nss_dt_ids); |
| #endif |
| |
| /* |
| * nss_driver |
| * Platform driver structure for NSS |
| */ |
| struct platform_driver nss_driver = { |
| .probe = nss_probe, |
| .remove = nss_remove, |
| .driver = { |
| .name = "qca-nss", |
| .owner = THIS_MODULE, |
| #if (NSS_DT_SUPPORT == 1) |
| .of_match_table = of_match_ptr(nss_dt_ids), |
| #endif |
| }, |
| }; |
| |
| #if (NSS_FREQ_SCALE_SUPPORT == 1) |
| /* |
| * nss_reset_frequency_stats_samples() |
| * Reset all frequency sampling state when auto scaling is turned off. |
| */ |
| static void nss_reset_frequency_stats_samples(void) |
| { |
| nss_runtime_samples.buffer_index = 0; |
| nss_runtime_samples.sum = 0; |
| nss_runtime_samples.average = 0; |
| nss_runtime_samples.sample_count = 0; |
| nss_runtime_samples.message_rate_limit = 0; |
| nss_runtime_samples.freq_scale_rate_limit_down = 0; |
| } |
| |
| /* |
| * nss_current_freq_handler() |
| * Handle Userspace Frequency Change Requests |
| */ |
| static int nss_current_freq_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret, i; |
| |
| BUG_ON(!nss_wq); |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| |
| if (!*lenp || (*ppos && !write)) { |
| printk("Frequency Set to %d\n", nss_cmd_buf.current_freq); |
| *lenp = 0; |
| return ret; |
| } |
| |
| /* |
| * Check if frequency exists in frequency Table |
| */ |
| i = 0; |
| while (i < NSS_FREQ_MAX_SCALE) { |
| if (nss_runtime_samples.freq_scale[i].frequency == nss_cmd_buf.current_freq) { |
| break; |
| } |
| i++; |
| } |
| if (i == NSS_FREQ_MAX_SCALE) { |
| printk("Frequency not found. Please check Frequency Table\n"); |
| nss_cmd_buf.current_freq = nss_runtime_samples.freq_scale[nss_runtime_samples.freq_scale_index].frequency; |
| return ret; |
| } |
| |
| /* |
| * Turn off Auto Scale |
| */ |
| nss_cmd_buf.auto_scale = 0; |
| nss_runtime_samples.freq_scale_ready = 0; |
| nss_runtime_samples.freq_scale_index = i; |
| |
| nss_work = (nss_work_t *)kmalloc(sizeof(nss_work_t), GFP_ATOMIC); |
| if (!nss_work) { |
| nss_info("NSS Freq WQ kmalloc fail"); |
| return ret; |
| } |
| INIT_WORK((struct work_struct *)nss_work, nss_hal_wq_function); |
| nss_work->frequency = nss_cmd_buf.current_freq; |
| nss_work->stats_enable = 0; |
| |
| /* |
| * Ensure we start with a fresh set of samples later |
| */ |
| nss_reset_frequency_stats_samples(); |
| |
| queue_work(nss_wq, (struct work_struct *)nss_work); |
| |
| return ret; |
| } |
| |
| /* |
| * nss_auto_scale_handler() |
| * Enables or Disable Auto Scaling |
| */ |
| static int nss_auto_scale_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| |
| if (!*lenp || (*ppos && !write)) { |
| return ret; |
| } |
| |
| if (nss_cmd_buf.auto_scale != 1) { |
| /* |
| * Is auto scaling currently enabled? If so, send the command to |
| * disable stats reporting to NSS |
| */ |
| if (nss_runtime_samples.freq_scale_ready != 0) { |
| nss_cmd_buf.current_freq = nss_runtime_samples.freq_scale[nss_runtime_samples.freq_scale_index].frequency; |
| nss_work = (nss_work_t *)kmalloc(sizeof(nss_work_t), GFP_ATOMIC); |
| if (!nss_work) { |
| nss_info("NSS Freq WQ kmalloc fail"); |
| return ret; |
| } |
| INIT_WORK((struct work_struct *)nss_work, nss_hal_wq_function); |
| nss_work->frequency = nss_cmd_buf.current_freq; |
| nss_work->stats_enable = 0; |
| queue_work(nss_wq, (struct work_struct *)nss_work); |
| nss_runtime_samples.freq_scale_ready = 0; |
| |
| /* |
| * The current samples would be stale later when scaling is |
| * enabled again, hence reset them |
| */ |
| nss_reset_frequency_stats_samples(); |
| } |
| return ret; |
| } |
| |
| /* |
| * Setup default values - Middle of Freq Scale Band |
| */ |
| nss_runtime_samples.freq_scale_index = 1; |
| nss_runtime_samples.sample_count = 0; |
| nss_runtime_samples.initialized = 0; |
| nss_cmd_buf.current_freq = nss_runtime_samples.freq_scale[nss_runtime_samples.freq_scale_index].frequency; |
| |
| nss_work = (nss_work_t *)kmalloc(sizeof(nss_work_t), GFP_ATOMIC); |
| if (!nss_work) { |
| nss_info("NSS Freq WQ kmalloc fail"); |
| return ret; |
| } |
| INIT_WORK((struct work_struct *)nss_work, nss_hal_wq_function); |
| nss_work->frequency = nss_cmd_buf.current_freq; |
| nss_work->stats_enable = 1; |
| queue_work(nss_wq, (struct work_struct *)nss_work); |
| |
| nss_cmd_buf.auto_scale = 0; |
| nss_runtime_samples.freq_scale_ready = 1; |
| |
| return ret; |
| } |
| |
| /* |
| * nss_get_freq_table_handler() |
| * Display Support Freq and Ex how to Change. |
| */ |
| static int nss_get_freq_table_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret, i; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| |
| if (write) { |
| return ret; |
| } |
| |
| printk("Frequency Supported - "); |
| |
| i = 0; |
| while (i < NSS_FREQ_MAX_SCALE) { |
| printk("%d Hz ", nss_runtime_samples.freq_scale[i].frequency); |
| i++; |
| } |
| printk("\n"); |
| |
| *lenp = 0; |
| return ret; |
| } |
| |
| /* |
| * nss_get_average_inst_handler() |
| * Display AVG Inst Per Ms. |
| */ |
| static int nss_get_average_inst_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| |
| if (write) { |
| return ret; |
| } |
| |
| printk("Current Inst Per Ms %x\n", nss_runtime_samples.average); |
| |
| *lenp = 0; |
| return ret; |
| } |
| #endif |
| |
| #if (NSS_FW_DBG_SUPPORT == 1) |
| /* |
| * nss_debug_handler() |
| * Enable NSS debug output |
| */ |
| static int nss_debug_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| if (!ret) { |
| if ((write) && (nss_ctl_debug != 0)) { |
| printk("Enabling NSS SPI Debug\n"); |
| nss_hal_debug_enable(); |
| } |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| /* |
| * nss_coredump_handler() |
| * Send Signal To Coredump NSS Cores |
| */ |
| static int nss_coredump_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| struct nss_ctx_instance *nss_ctx = &nss_top_main.nss[NSS_CORE_0]; |
| int ret; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| if (!ret) { |
| /* |
| * if nss_cmd_buf.coredump is not 0 or 1, panic will be disabled |
| * when NSS FW crashes, so OEM/ODM have a chance to use mdump |
| * to dump crash dump (coredump) and send dump to us for analysis. |
| */ |
| if ((write) && (nss_ctl_debug != 0) && nss_cmd_buf.coredump == 1) { |
| printk("Coredumping to DDR\n"); |
| nss_hal_send_interrupt(nss_ctx, NSS_H2N_INTR_TRIGGER_COREDUMP); |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * nss_jumbo_mru_handler() |
| * Sysctl to modify nss_jumbo_mru |
| */ |
| static int nss_jumbo_mru_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| if (ret) { |
| return ret; |
| } |
| |
| if (write) { |
| nss_core_set_jumbo_mru(nss_jumbo_mru); |
| nss_info("jumbo_mru set to %d\n", nss_jumbo_mru); |
| } |
| |
| return ret; |
| } |
| |
| /* nss_paged_mode_handler() |
| * Sysctl to modify nss_paged_mode. |
| */ |
| |
| static int nss_paged_mode_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| if (ret) { |
| return ret; |
| } |
| |
| if (write) { |
| nss_core_set_paged_mode(nss_paged_mode); |
| nss_info("paged_mode set to %d\n", nss_paged_mode); |
| } |
| |
| return ret; |
| } |
| |
| #if (NSS_SKB_REUSE_SUPPORT == 1) |
| /* |
| * nss_get_min_reuse_handler() |
| * Sysctl to get min reuse sizes |
| */ |
| static int nss_get_min_reuse_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| struct nss_ctx_instance *nss_ctx = NULL; |
| uint32_t core_id; |
| |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| if (ret) { |
| return ret; |
| } |
| |
| printk("Min SKB reuse sizes - "); |
| |
| for (core_id = 0; core_id < NSS_CORE_MAX; core_id++) { |
| nss_ctx = (struct nss_ctx_instance *)&nss_top_main.nss[core_id]; |
| printk("core %d: %d ", core_id, nss_core_get_min_reuse(nss_ctx)); |
| } |
| |
| printk("\n"); |
| *lenp = 0; |
| return ret; |
| } |
| |
| /* |
| * nss_max_reuse_handler() |
| * Sysctl to modify nss_max_reuse |
| */ |
| static int nss_max_reuse_handler(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos) |
| { |
| int ret; |
| |
| nss_max_reuse = nss_core_get_max_reuse(); |
| ret = proc_dointvec(ctl, write, buffer, lenp, ppos); |
| if (ret) { |
| return ret; |
| } |
| |
| if (write) { |
| nss_core_set_max_reuse(nss_max_reuse); |
| nss_info("max_reuse set to %d\n", nss_max_reuse); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * sysctl-tuning for NSS driver SKB reuse |
| */ |
| static struct ctl_table nss_skb_reuse_table[] = { |
| { |
| .procname = "min_sizes", |
| .data = NULL, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_get_min_reuse_handler, |
| }, |
| { |
| .procname = "max_size", |
| .data = &nss_max_reuse, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_max_reuse_handler, |
| }, |
| { } |
| }; |
| #endif |
| |
| #if (NSS_FREQ_SCALE_SUPPORT == 1) |
| /* |
| * sysctl-tuning infrastructure. |
| */ |
| static struct ctl_table nss_freq_table[] = { |
| { |
| .procname = "current_freq", |
| .data = &nss_cmd_buf.current_freq, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_current_freq_handler, |
| }, |
| { |
| .procname = "freq_table", |
| .data = &nss_cmd_buf.max_freq, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_get_freq_table_handler, |
| }, |
| { |
| .procname = "auto_scale", |
| .data = &nss_cmd_buf.auto_scale, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_auto_scale_handler, |
| }, |
| { |
| .procname = "inst_per_sec", |
| .data = &nss_cmd_buf.average_inst, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_get_average_inst_handler, |
| }, |
| { } |
| }; |
| #endif |
| |
| static struct ctl_table nss_general_table[] = { |
| { |
| .procname = "redirect", |
| .data = &nss_ctl_redirect, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec, |
| }, |
| #if (NSS_FW_DBG_SUPPORT == 1) |
| { |
| .procname = "debug", |
| .data = &nss_ctl_debug, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_debug_handler, |
| }, |
| #endif |
| { |
| .procname = "coredump", |
| .data = &nss_cmd_buf.coredump, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_coredump_handler, |
| }, |
| { |
| .procname = "logbuf", |
| .data = &nss_ctl_logbuf, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_logbuffer_handler, |
| }, |
| { |
| .procname = "jumbo_mru", |
| .data = &nss_jumbo_mru, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_jumbo_mru_handler, |
| }, |
| { |
| .procname = "paged_mode", |
| .data = &nss_paged_mode, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = &nss_paged_mode_handler, |
| }, |
| { } |
| }; |
| |
| static struct ctl_table nss_init_dir[] = { |
| #if (NSS_FREQ_SCALE_SUPPORT == 1) |
| { |
| .procname = "clock", |
| .mode = 0555, |
| .child = nss_freq_table, |
| }, |
| #endif |
| { |
| .procname = "general", |
| .mode = 0555, |
| .child = nss_general_table, |
| }, |
| #if (NSS_SKB_REUSE_SUPPORT == 1) |
| { |
| .procname = "skb_reuse", |
| .mode = 0555, |
| .child = nss_skb_reuse_table, |
| }, |
| #endif |
| { } |
| }; |
| |
| static struct ctl_table nss_root_dir[] = { |
| { |
| .procname = "nss", |
| .mode = 0555, |
| .child = nss_init_dir, |
| }, |
| { } |
| }; |
| |
| static struct ctl_table nss_root[] = { |
| { |
| .procname = "dev", |
| .mode = 0555, |
| .child = nss_root_dir, |
| }, |
| { } |
| }; |
| |
| static struct ctl_table_header *nss_dev_header; |
| |
| /* |
| * nss_init() |
| * Registers nss driver |
| */ |
| static int __init nss_init(void) |
| { |
| #if (NSS_DT_SUPPORT == 1) |
| struct device_node *cmn = NULL; |
| #endif |
| nss_info("Init NSS driver"); |
| |
| #if (NSS_DT_SUPPORT == 1) |
| /* |
| * Get reference to NSS common device node |
| */ |
| cmn = of_find_node_by_name(NULL, "nss-common"); |
| if (!cmn) { |
| nss_info_always("qca-nss-drv.ko is loaded for symbol link\n"); |
| return 0; |
| } |
| of_node_put(cmn); |
| |
| /* |
| * Pick up HAL by target information |
| */ |
| #if defined(NSS_HAL_IPQ806X_SUPPORT) |
| if (of_machine_is_compatible("qcom,ipq8064") || of_machine_is_compatible("qcom,ipq8062")) { |
| nss_top_main.hal_ops = &nss_hal_ipq806x_ops; |
| nss_top_main.data_plane_ops = &nss_data_plane_gmac_ops; |
| nss_top_main.num_nss = 2; |
| } |
| #endif |
| #if defined(NSS_HAL_IPQ807x_SUPPORT) |
| if (of_machine_is_compatible("qcom,ipq807x")) { |
| nss_top_main.hal_ops = &nss_hal_ipq807x_ops; |
| nss_top_main.data_plane_ops = &nss_data_plane_edma_ops; |
| #if defined(NSS_MEM_PROFILE_LOW) |
| nss_top_main.num_nss = 1; |
| #else |
| nss_top_main.num_nss = 2; |
| #endif |
| } |
| #endif |
| #if defined(NSS_HAL_IPQ60XX_SUPPORT) |
| if (of_machine_is_compatible("qcom,ipq6018")) { |
| nss_top_main.hal_ops = &nss_hal_ipq60xx_ops; |
| nss_top_main.data_plane_ops = &nss_data_plane_edma_ops; |
| nss_top_main.num_nss = 1; |
| } |
| #endif |
| #if defined(NSS_HAL_IPQ50XX_SUPPORT) |
| if (of_machine_is_compatible("qcom,ipq5018")) { |
| nss_top_main.hal_ops = &nss_hal_ipq50xx_ops; |
| nss_top_main.data_plane_ops = &nss_data_plane_edma_ops; |
| nss_top_main.num_nss = 1; |
| } |
| #endif |
| #if defined(NSS_HAL_FSM9010_SUPPORT) |
| if (of_machine_is_compatible("qcom,fsm9010")) { |
| nss_top_main.hal_ops = &nss_hal_fsm9010_ops; |
| nss_top_main.data_plane_ops = &nss_data_plane_gmac_ops; |
| nss_top_main.num_nss = 1; |
| } |
| #endif |
| if (!nss_top_main.hal_ops) { |
| nss_info_always("No supported HAL compiled on this platform\n"); |
| return -EFAULT; |
| } |
| #else |
| /* |
| * For banana, only ipq806x is supported |
| */ |
| nss_top_main.hal_ops = &nss_hal_ipq806x_ops; |
| nss_top_main.data_plane_ops = &nss_data_plane_gmac_ops; |
| nss_top_main.num_nss = 2; |
| |
| #endif /* NSS_DT_SUPPORT */ |
| nss_top_main.nss_hal_common_init_done = false; |
| |
| /* |
| * Initialize data_plane workqueue |
| */ |
| if (nss_data_plane_init_delay_work()) { |
| nss_warning("Error initializing nss_data_plane_workqueue\n"); |
| return -EFAULT; |
| } |
| |
| /* |
| * Enable spin locks |
| */ |
| spin_lock_init(&(nss_top_main.lock)); |
| spin_lock_init(&(nss_top_main.stats_lock)); |
| mutex_init(&(nss_top_main.wq_lock)); |
| |
| /* |
| * Enable NSS statistics |
| */ |
| nss_stats_init(); |
| |
| /* |
| * Enable NSS statistics names. |
| */ |
| nss_strings_init(); |
| |
| /* |
| * Register sysctl table. |
| */ |
| nss_dev_header = register_sysctl_table(nss_root); |
| |
| /* |
| * Registering sysctl for ipv4/6 specific config. |
| */ |
| nss_ipv4_register_sysctl(); |
| nss_ipv6_register_sysctl(); |
| |
| /* |
| * Registering sysctl for n2h specific config. |
| */ |
| if (nss_top_main.num_nss == 1) { |
| nss_n2h_single_core_register_sysctl(); |
| } else { |
| nss_n2h_multi_core_register_sysctl(); |
| } |
| |
| /* |
| * Registering sysctl for rps specific config. |
| */ |
| nss_rps_register_sysctl(); |
| |
| /* |
| * Registering sysctl for c2c_tx specific config. |
| */ |
| nss_c2c_tx_register_sysctl(); |
| |
| /* |
| * Registering sysctl for for printing non zero stats. |
| */ |
| nss_stats_register_sysctl(); |
| |
| /* |
| * Register sysctl for project config |
| */ |
| nss_project_register_sysctl(); |
| |
| /* |
| * Registering sysctl for pppoe specific config. |
| */ |
| nss_pppoe_register_sysctl(); |
| |
| /* |
| * Setup Runtime Sample values |
| */ |
| nss_runtime_samples.freq_scale_index = 1; |
| nss_runtime_samples.freq_scale_ready = 0; |
| nss_runtime_samples.freq_scale_rate_limit_down = 0; |
| nss_runtime_samples.buffer_index = 0; |
| nss_runtime_samples.sum = 0; |
| nss_runtime_samples.sample_count = 0; |
| nss_runtime_samples.average = 0; |
| nss_runtime_samples.message_rate_limit = 0; |
| nss_runtime_samples.initialized = 0; |
| |
| nss_cmd_buf.current_freq = nss_runtime_samples.freq_scale[nss_runtime_samples.freq_scale_index].frequency; |
| |
| /* |
| * Initial Workqueue |
| */ |
| nss_wq = create_workqueue("nss_freq_queue"); |
| |
| #if (NSS_PM_SUPPORT == 1) |
| /* |
| * Initialize NSS Bus PM module |
| */ |
| nss_pm_init(); |
| |
| /* |
| * Register with Bus driver |
| */ |
| pm_client = nss_pm_client_register(NSS_PM_CLIENT_NETAP); |
| if (!pm_client) { |
| nss_warning("Error registering with PM driver"); |
| } |
| #endif |
| |
| /* |
| * Initialize mtu size needed as start |
| */ |
| nss_top_main.prev_mtu_sz = ETH_DATA_LEN; |
| |
| /* |
| * register panic handler and timeout control |
| */ |
| nss_coredump_notify_register(); |
| nss_coredump_init_delay_work(); |
| |
| /* |
| * Init capwap |
| */ |
| nss_capwap_init(); |
| |
| /* |
| * Init QRFS |
| */ |
| nss_qrfs_init(); |
| |
| /* |
| * Init c2c_tx |
| */ |
| nss_c2c_tx_init(); |
| |
| /* |
| * Init pvxlan |
| */ |
| nss_pvxlan_init(); |
| |
| /* |
| * Init clmap |
| */ |
| nss_clmap_init(); |
| |
| /* |
| * INIT ppe on supported platform |
| */ |
| if (of_machine_is_compatible("qcom,ipq807x") || of_machine_is_compatible("qcom,ipq6018")) { |
| nss_ppe_init(); |
| } |
| |
| /* |
| * Register platform_driver |
| */ |
| return platform_driver_register(&nss_driver); |
| } |
| |
| /* |
| * nss_cleanup() |
| * Unregisters nss driver |
| */ |
| static void __exit nss_cleanup(void) |
| { |
| nss_info("Exit NSS driver"); |
| |
| if (nss_dev_header) |
| unregister_sysctl_table(nss_dev_header); |
| |
| /* |
| * Unregister n2h specific sysctl |
| */ |
| nss_n2h_unregister_sysctl(); |
| |
| /* |
| * Unregister rps specific sysctl |
| */ |
| nss_rps_unregister_sysctl(); |
| |
| /* |
| * Unregister c2c_tx specific sysctl |
| */ |
| nss_c2c_tx_unregister_sysctl(); |
| |
| /* |
| * Unregister pppoe specific sysctl |
| */ |
| nss_pppoe_unregister_sysctl(); |
| |
| /* |
| * Unregister ipv4/6 specific sysctl |
| */ |
| nss_ipv4_unregister_sysctl(); |
| nss_ipv6_unregister_sysctl(); |
| |
| /* |
| * Free Memory allocated for connection tables |
| */ |
| nss_ipv4_free_conn_tables(); |
| nss_ipv6_free_conn_tables(); |
| |
| nss_project_unregister_sysctl(); |
| nss_data_plane_destroy_delay_work(); |
| |
| /* |
| * cleanup ppe on supported platform |
| */ |
| if (of_machine_is_compatible("qcom,ipq807x") || of_machine_is_compatible("qcom,ipq6018")) { |
| nss_ppe_free(); |
| } |
| |
| platform_driver_unregister(&nss_driver); |
| } |
| |
| module_init(nss_init); |
| module_exit(nss_cleanup); |
| |
| MODULE_DESCRIPTION("QCA NSS Driver"); |
| MODULE_AUTHOR("Qualcomm Atheros Inc"); |
| MODULE_LICENSE("Dual BSD/GPL"); |