Gitiles
Code Review Sign In
gerrit.nordix.org / codeaurora / quic / qsdk / oss / lklm / qca-nss-ecm / 908ecb358b38b5d3276f3d41eb61074974bad18e / . / ecm_interface.c
blob: 22df861163c5ff1308a04e925649757fbae2de63 [file] [log] [blame]
/*
**************************************************************************
* Copyright (c) 2014,2015 The Linux Foundation. All rights reserved.
* Permission to use, copy, modify, and/or distribute this software for
* any purpose with or without fee is hereby granted, provided that the
* above copyright notice and this permission notice appear in all copies.
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
* OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
**************************************************************************
*/
#include <linux/version.h>
#include <linux/types.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/icmp.h>
#include <linux/kthread.h>
#include <linux/pkt_sched.h>
#include <linux/string.h>
#include <net/ip6_route.h>
#include <net/ip6_fib.h>
#include <net/ipv6.h>
#include <net/route.h>
#include <net/ip_fib.h>
#include <net/ip.h>
#include <net/tcp.h>
#include <asm/unaligned.h>
#include <asm/uaccess.h> /* for put_user */
#include <linux/inet.h>
#include <linux/in6.h>
#include <linux/in.h>
#include <linux/udp.h>
#include <linux/tcp.h>
#include <linux/if_bridge.h>
#include <linux/inetdevice.h>
#if defined(ECM_INTERFACE_TUNIPIP6_ENABLE) || defined(ECM_INTERFACE_SIT_ENABLE)
#include <net/ipip.h>
#endif
#include <net/ip6_tunnel.h>
#include <net/addrconf.h>
#include <linux/if_arp.h>
#include <linux/netfilter_ipv4.h>
#include <linux/netfilter_bridge.h>
#include <linux/if_bridge.h>
#include <net/arp.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_acct.h>
#include <net/netfilter/nf_conntrack_helper.h>
#include <net/netfilter/nf_conntrack_l4proto.h>
#include <net/netfilter/nf_conntrack_l3proto.h>
#include <net/netfilter/nf_conntrack_zones.h>
#include <net/netfilter/nf_conntrack_core.h>
#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
#include <net/netfilter/ipv4/nf_defrag_ipv4.h>
#ifdef ECM_INTERFACE_VLAN_ENABLE
#include <linux/../../net/8021q/vlan.h>
#include <linux/if_vlan.h>
#endif
#ifdef ECM_INTERFACE_PPP_ENABLE
#include <linux/if_pppox.h>
#endif
/*
* Debug output levels
* 0 = OFF
* 1 = ASSERTS / ERRORS
* 2 = 1 + WARN
* 3 = 2 + INFO
* 4 = 3 + TRACE
*/
#define DEBUG_LEVEL ECM_INTERFACE_DEBUG_LEVEL
#include <nss_api_if.h>
#include "ecm_types.h"
#include "ecm_db_types.h"
#include "ecm_tracker.h"
#include "ecm_classifier.h"
#include "ecm_front_end_types.h"
#include "ecm_tracker_datagram.h"
#include "ecm_tracker_udp.h"
#include "ecm_tracker_tcp.h"
#include "ecm_db.h"
#include "ecm_interface.h"
#ifdef ECM_IPV6_ENABLE
/*
* TODO: Remove once the Linux image and headers get propogated.
*/
struct net_device *ipv6_dev_find(struct net *net, struct in6_addr *addr, int strict);
#endif
/*
* Locking - concurrency control
*/
static DEFINE_SPINLOCK(ecm_interface_lock); /* Protect against SMP access between netfilter, events and private threaded function. */
/*
* Management thread control
*/
static bool ecm_interface_terminate_pending = false; /* True when the user has signalled we should quit */
/*
* ecm_interface_get_and_hold_dev_master()
* Returns the master device of a net device if any.
*/
struct net_device *ecm_interface_get_and_hold_dev_master(struct net_device *dev)
{
struct net_device *master;
#if (LINUX_VERSION_CODE > KERNEL_VERSION(3,6,0))
rcu_read_lock();
master = netdev_master_upper_dev_get_rcu(dev);
if (!master) {
rcu_read_unlock();
return NULL;
}
dev_hold(master);
rcu_read_unlock();
#else
master = dev->master;
if (!master) {
return NULL;
}
dev_hold(master);
#endif
return master;
}
EXPORT_SYMBOL(ecm_interface_get_and_hold_dev_master);
/*
* ecm_interface_dev_find_by_local_addr_ipv4()
* Return a hold to the device for the given local IP address. Returns NULL on failure.
*/
static struct net_device *ecm_interface_dev_find_by_local_addr_ipv4(ip_addr_t addr)
{
__be32 be_addr;
struct net_device *dev;
ECM_IP_ADDR_TO_NIN4_ADDR(be_addr, addr);
dev = ip_dev_find(&init_net, be_addr);
return dev;
}
#ifdef ECM_IPV6_ENABLE
/*
* ecm_interface_dev_find_by_local_addr_ipv6()
* Return a hold to the device for the given local IP address. Returns NULL on failure.
*/
static struct net_device *ecm_interface_dev_find_by_local_addr_ipv6(ip_addr_t addr)
{
struct in6_addr addr6;
struct net_device *dev;
ECM_IP_ADDR_TO_NIN6_ADDR(addr6, addr);
dev = (struct net_device *)ipv6_dev_find(&init_net, &addr6, 1);
return dev;
}
#endif
/*
* ecm_interface_dev_find_by_local_addr()
* Return the device on which the local address resides.
*
* Returns a hold to the device or NULL on failure.
*/
struct net_device *ecm_interface_dev_find_by_local_addr(ip_addr_t addr)
{
char __attribute__((unused)) addr_str[40];
DEBUG_ECM_IP_ADDR_TO_STRING(addr_str, addr);
DEBUG_TRACE("Locate dev for: %s\n", addr_str);
if (ECM_IP_ADDR_IS_V4(addr)) {
return ecm_interface_dev_find_by_local_addr_ipv4(addr);
}
#ifdef ECM_IPV6_ENABLE
return ecm_interface_dev_find_by_local_addr_ipv6(addr);
#else
return NULL;
#endif
}
EXPORT_SYMBOL(ecm_interface_dev_find_by_local_addr);
/*
* ecm_interface_dev_find_by_addr()
* Return the net device on which the given IP address resides. Returns NULL on faiure.
*
* NOTE: The device may be the device upon which has a default gateway to reach the address.
* from_local_addr is true when the device was found by a local address search.
*/
struct net_device *ecm_interface_dev_find_by_addr(ip_addr_t addr, bool *from_local_addr)
{
char __attribute__((unused)) addr_str[40];
struct ecm_interface_route ecm_rt;
struct net_device *dev;
struct dst_entry *dst;
DEBUG_ECM_IP_ADDR_TO_STRING(addr_str, addr);
/*
* Is the address a local IP?
*/
DEBUG_TRACE("find net device for address: %s\n", addr_str);
dev = ecm_interface_dev_find_by_local_addr(addr);
if (dev) {
*from_local_addr = true;
DEBUG_TRACE("addr: %s is local: %p (%s)\n", addr_str, dev, dev->name);
return dev;
}
DEBUG_TRACE("addr: %s is not local\n", addr_str);
/*
* Try a route to the address instead
* NOTE: This will locate a route entry in the route destination *cache*.
*/
if (!ecm_interface_find_route_by_addr(addr, &ecm_rt)) {
DEBUG_WARN("addr: %s - no dev locatable\n", addr_str);
return NULL;
}
*from_local_addr = false;
dst = ecm_rt.dst;
dev = dst->dev;
dev_hold(dev);
ecm_interface_route_release(&ecm_rt);
DEBUG_TRACE("dest_addr: %s uses dev: %p(%s)\n", addr_str, dev, dev->name);
return dev;
}
EXPORT_SYMBOL(ecm_interface_dev_find_by_addr);
#ifdef ECM_IPV6_ENABLE
/*
* ecm_interface_mac_addr_get_ipv6()
* Return mac for an IPv6 address
*
* GGG TODO Need to make sure this also works for local IP addresses too.
*/
static bool ecm_interface_mac_addr_get_ipv6(ip_addr_t addr, uint8_t *mac_addr, bool *on_link, ip_addr_t gw_addr)
{
struct in6_addr daddr;
struct ecm_interface_route ecm_rt;
struct neighbour *neigh;
struct rt6_info *rt;
struct dst_entry *dst;
/*
* Get the MAC address that corresponds to IP address given.
* We look up the rt6_info entries and, from its neighbour structure, obtain the hardware address.
* This means we will also work if the neighbours are routers too.
*/
ECM_IP_ADDR_TO_NIN6_ADDR(daddr, addr);
if (!ecm_interface_find_route_by_addr(addr, &ecm_rt)) {
*on_link = false;
return false;
}
DEBUG_ASSERT(!ecm_rt.v4_route, "Did not locate a v6 route!\n");
/*
* Is this destination on link or off-link via a gateway?
*/
rt = ecm_rt.rt.rtv6;
if (!ECM_IP_ADDR_MATCH(rt->rt6i_dst.addr.in6_u.u6_addr32, rt->rt6i_gateway.in6_u.u6_addr32) || (rt->rt6i_flags & RTF_GATEWAY)) {
*on_link = false;
ECM_NIN6_ADDR_TO_IP_ADDR(gw_addr, rt->rt6i_gateway)
} else {
*on_link = true;
}
rcu_read_lock();
dst = ecm_rt.dst;
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(3,6,0))
neigh = dst_get_neighbour_noref(dst);
if (neigh) {
neigh_hold(neigh);
}
#else
neigh = dst_neigh_lookup(dst, &daddr);
#endif
if (!neigh) {
neigh = neigh_lookup(&nd_tbl, &daddr, dst->dev);
}
if (!neigh) {
rcu_read_unlock();
ecm_interface_route_release(&ecm_rt);
DEBUG_WARN("No neigh reference\n");
return false;
}
if (!(neigh->nud_state & NUD_VALID)) {
rcu_read_unlock();
neigh_release(neigh);
ecm_interface_route_release(&ecm_rt);
DEBUG_WARN("NUD invalid\n");
return false;
}
if (!neigh->dev) {
rcu_read_unlock();
neigh_release(neigh);
ecm_interface_route_release(&ecm_rt);
DEBUG_WARN("Neigh dev invalid\n");
return false;
}
/*
* If neigh->dev is a loopback then addr is a local address in which case we take the MAC from given device
*/
if (neigh->dev->flags & IFF_LOOPBACK) {
// GGG TODO Create an equivalent logic to that for ipv4, maybe need to create an ip6_dev_find()?
DEBUG_TRACE("local address " ECM_IP_ADDR_OCTAL_FMT " (found loopback)\n", ECM_IP_ADDR_TO_OCTAL(addr));
memset(mac_addr, 0, 6);
} else {
memcpy(mac_addr, neigh->ha, 6);
}
rcu_read_unlock();
neigh_release(neigh);
ecm_interface_route_release(&ecm_rt);
DEBUG_TRACE(ECM_IP_ADDR_OCTAL_FMT " maps to %pM\n", ECM_IP_ADDR_TO_OCTAL(addr), mac_addr);
return true;
}
#endif
/*
* ecm_interface_mac_addr_get_ipv4()
* Return mac for an IPv4 address
*/
static bool ecm_interface_mac_addr_get_ipv4(ip_addr_t addr, uint8_t *mac_addr, bool *on_link, ip_addr_t gw_addr)
{
struct neighbour *neigh;
struct ecm_interface_route ecm_rt;
struct rtable *rt;
struct dst_entry *dst;
__be32 ipv4_addr;
/*
* Get the MAC address that corresponds to IP address given.
* We look up the rtable entries and, from its neighbour structure, obtain the hardware address.
* This means we will also work if the neighbours are routers too.
* We also locate the MAC if the address is a local host address.
*/
ECM_IP_ADDR_TO_NIN4_ADDR(ipv4_addr, addr);
if (!ecm_interface_find_route_by_addr(addr, &ecm_rt)) {
*on_link = false;
return false;
}
DEBUG_ASSERT(ecm_rt.v4_route, "Did not locate a v4 route!\n");
DEBUG_TRACE("Found route\n");
/*
* Is this destination on link or off-link via a gateway?
*/
rt = ecm_rt.rt.rtv4;
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(3,6,0))
if ((rt->rt_dst != rt->rt_gateway) || (rt->rt_flags & RTF_GATEWAY)) {
#else
if (rt->rt_uses_gateway || (rt->rt_flags & RTF_GATEWAY)) {
#endif
*on_link = false;
ECM_NIN4_ADDR_TO_IP_ADDR(gw_addr, rt->rt_gateway)
} else {
*on_link = true;
}
/*
* Get the neighbour entry for the address
*/
rcu_read_lock();
dst = ecm_rt.dst;
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(3,6,0))
neigh = dst_get_neighbour_noref(dst);
if (neigh) {
neigh_hold(neigh);
}
#else
neigh = dst_neigh_lookup(dst, &ipv4_addr);
#endif
if (!neigh) {
neigh = neigh_lookup(&arp_tbl, &ipv4_addr, dst->dev);
}
if (!neigh) {
rcu_read_unlock();
ecm_interface_route_release(&ecm_rt);
DEBUG_WARN("no neigh\n");
return false;
}
if (!(neigh->nud_state & NUD_VALID)) {
rcu_read_unlock();
neigh_release(neigh);
ecm_interface_route_release(&ecm_rt);
DEBUG_WARN("neigh nud state is not valid\n");
return false;
}
if (!neigh->dev) {
rcu_read_unlock();
neigh_release(neigh);
ecm_interface_route_release(&ecm_rt);
DEBUG_WARN("neigh has no device\n");
return false;
}
/*
* If the device is loopback this will be because the address is a local address
* In this case locate the device that has this local address and get its mac.
*/
if (neigh->dev->type == ARPHRD_LOOPBACK) {
struct net_device *dev;
DEBUG_TRACE("%pI4 finds loopback device, dev: %p (%s)\n", &ipv4_addr, neigh->dev, neigh->dev->name);
rcu_read_unlock();
neigh_release(neigh);
ecm_interface_route_release(&ecm_rt);
/*
* Lookup the device that has this IP address assigned
*/
dev = ip_dev_find(&init_net, ipv4_addr);
if (!dev) {
DEBUG_WARN("Unable to locate dev for: %pI4\n", &ipv4_addr);
return false;
}
memcpy(mac_addr, dev->dev_addr, (size_t)dev->addr_len);
DEBUG_TRACE("is local addr: %pI4, mac: %pM, dev ifindex: %d, dev: %p (%s), dev_type: %d\n",
&ipv4_addr, mac_addr, dev->ifindex, dev, dev->name, dev->type);
dev_put(dev);
return true;
}
if (!(neigh->dev->flags & IFF_NOARP)) {
memcpy(mac_addr, neigh->ha, (size_t)neigh->dev->addr_len);
} else {
DEBUG_TRACE("non-arp device: %p (%s, type: %d) to reach %pI4\n", neigh->dev, neigh->dev->name, neigh->dev->type, &ipv4_addr);
memset(mac_addr, 0, 6);
}
DEBUG_TRACE("addr: %pI4, mac: %pM, iif: %d, neigh dev ifindex: %d, dev: %p (%s), dev_type: %d\n",
&ipv4_addr, mac_addr, rt->rt_iif, neigh->dev->ifindex, neigh->dev, neigh->dev->name, neigh->dev->type);
rcu_read_unlock();
neigh_release(neigh);
ecm_interface_route_release(&ecm_rt);
return true;
}
/*
* ecm_interface_mac_addr_get()
* Return the mac address for the given IP address. Returns false on failure.
*
* dev is the device on which the addr was sent/received. If addr is a local address then mac shall be the given dev mac.
*
* GGG TODO Make this function work for IPv6!!!!!!!!!!!!!!
*/
bool ecm_interface_mac_addr_get(ip_addr_t addr, uint8_t *mac_addr, bool *on_link, ip_addr_t gw_addr)
{
if (ECM_IP_ADDR_IS_V4(addr)) {
return ecm_interface_mac_addr_get_ipv4(addr, mac_addr, on_link, gw_addr);
}
#ifdef ECM_IPV6_ENABLE
return ecm_interface_mac_addr_get_ipv6(addr, mac_addr, on_link, gw_addr);
#else
return false;
#endif
}
EXPORT_SYMBOL(ecm_interface_mac_addr_get);
/*
* ecm_interface_addr_find_route_by_addr_ipv4()
* Return the route for the given IP address. Returns NULL on failure.
*/
static bool ecm_interface_find_route_by_addr_ipv4(ip_addr_t addr, struct ecm_interface_route *ecm_rt)
{
__be32 be_addr;
/*
* Get a route to the given IP address, this will allow us to also find the interface
* it is using to communicate with that IP address.
*/
ECM_IP_ADDR_TO_NIN4_ADDR(be_addr, addr);
ecm_rt->rt.rtv4 = ip_route_output(&init_net, be_addr, 0, 0, 0);
if (IS_ERR(ecm_rt->rt.rtv4)) {
DEBUG_TRACE("No output route to: %pI4n\n", &be_addr);
return false;
}
DEBUG_TRACE("Output route to: %pI4n is: %p\n", &be_addr, ecm_rt->rt.rtv4);
ecm_rt->dst = (struct dst_entry *)ecm_rt->rt.rtv4;
ecm_rt->v4_route = true;
return true;
}
#ifdef ECM_IPV6_ENABLE
/*
* ecm_interface_addr_find_route_by_addr_ipv6()
* Return the route for the given IP address. Returns NULL on failure.
*/
static bool ecm_interface_find_route_by_addr_ipv6(ip_addr_t addr, struct ecm_interface_route *ecm_rt)
{
struct in6_addr naddr;
ECM_IP_ADDR_TO_NIN6_ADDR(naddr, addr);
/*
* Get a route to the given IP address, this will allow us to also find the interface
* it is using to communicate with that IP address.
*/
ecm_rt->rt.rtv6 = rt6_lookup(&init_net, &naddr, NULL, 0, 0);
if (!ecm_rt->rt.rtv6) {
DEBUG_TRACE("No output route to: " ECM_IP_ADDR_OCTAL_FMT "\n", ECM_IP_ADDR_TO_OCTAL(addr));
return NULL;
}
DEBUG_TRACE("Output route to: " ECM_IP_ADDR_OCTAL_FMT " is: %p\n", ECM_IP_ADDR_TO_OCTAL(addr), ecm_rt->rt.rtv6);
ecm_rt->dst = (struct dst_entry *)ecm_rt->rt.rtv6;
ecm_rt->v4_route = false;
return true;
}
#endif
/*
* ecm_interface_addr_find_route_by_addr()
* Return the route (in the given parameter) for the given IP address. Returns false on failure.
*
* Route is the device on which the addr is reachable, which may be loopback for local addresses.
*
* Returns true if the route was able to be located. The route must be released using ecm_interface_route_release().
*/
bool ecm_interface_find_route_by_addr(ip_addr_t addr, struct ecm_interface_route *ecm_rt)
{
char __attribute__((unused)) addr_str[40];
DEBUG_ECM_IP_ADDR_TO_STRING(addr_str, addr);
DEBUG_TRACE("Locate route to: %s\n", addr_str);
if (ECM_IP_ADDR_IS_V4(addr)) {
return ecm_interface_find_route_by_addr_ipv4(addr, ecm_rt);
}
#ifdef ECM_IPV6_ENABLE
return ecm_interface_find_route_by_addr_ipv6(addr, ecm_rt);
#else
return false;
#endif
}
EXPORT_SYMBOL(ecm_interface_find_route_by_addr);
/*
* ecm_interface_route_release()
* Release an ecm route
*/
void ecm_interface_route_release(struct ecm_interface_route *rt)
{
dst_release(rt->dst);
}
EXPORT_SYMBOL(ecm_interface_route_release);
#ifdef ECM_INTERFACE_PPP_ENABLE
/*
* ecm_interface_skip_l2tp_pptp()
* skip l2tp/pptp tunnel encapsulated traffic
*
* ECM does not handle L2TP or PPTP encapsulated packets,
* this function detects packets of that type so they can be skipped over to improve their throughput.
*/
bool ecm_interface_skip_l2tp_pptp(struct sk_buff *skb, const struct net_device *out)
{
struct ppp_channel *ppp_chan[1];
int px_proto;
/*
* skip first pass of l2tp/pptp tunnel encapsulated traffic
*/
if (out->type == ARPHRD_PPP) {
if (ppp_hold_channels((struct net_device *)out, ppp_chan, 1) == 1) {
px_proto = ppp_channel_get_protocol(ppp_chan[0]);
ppp_release_channels(ppp_chan, 1);
return ((px_proto == PX_PROTO_OL2TP) || (px_proto == PX_PROTO_PPTP));
}
}
/*
* skip second pass of l2tp tunnel encapsulated traffic
*/
if (!skb->sk) {
return false;
}
if (skb->sk->sk_protocol != IPPROTO_UDP) {
return false;
}
if (unlikely(udp_sk(skb->sk)->encap_type == UDP_ENCAP_L2TPINUDP)) {
return true;
}
return false;
}
#endif
#ifdef ECM_INTERFACE_VLAN_ENABLE
/*
* ecm_interface_vlan_interface_establish()
* Returns a reference to a iface of the VLAN type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_vlan_interface_establish(struct ecm_db_interface_info_vlan *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish VLAN iface: %s with address: %pM, vlan tag: %u, vlan_tpid: %x MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->address, type_info->vlan_tag, type_info->vlan_tpid, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_vlan(type_info->address, type_info->vlan_tag, type_info->vlan_tpid);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_vlan(type_info->address, type_info->vlan_tag, type_info->vlan_tpid);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_vlan(nii, type_info->address, type_info->vlan_tag, type_info->vlan_tpid, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: vlan iface established\n", nii);
return nii;
}
#endif
/*
* ecm_interface_bridge_interface_establish()
* Returns a reference to a iface of the BRIDGE type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_bridge_interface_establish(struct ecm_db_interface_info_bridge *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish BRIDGE iface: %s with address: %pM, MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->address, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_bridge(type_info->address);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_bridge(type_info->address);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_bridge(nii, type_info->address, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: bridge iface established\n", nii);
return nii;
}
#ifdef ECM_INTERFACE_BOND_ENABLE
/*
* ecm_interface_lag_interface_establish()
* Returns a reference to a iface of the LAG type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_lag_interface_establish(struct ecm_db_interface_info_lag *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish LAG iface: %s with address: %pM, MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->address, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_lag(type_info->address);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_lag(type_info->address);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_lag(nii, type_info->address, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: lag iface established\n", nii);
return nii;
}
#endif
/*
* ecm_interface_ethernet_interface_establish()
* Returns a reference to a iface of the ETHERNET type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_ethernet_interface_establish(struct ecm_db_interface_info_ethernet *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish ETHERNET iface: %s with address: %pM, MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->address, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_ifidx_find_and_ref_ethernet(type_info->address, dev_interface_num);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_ifidx_find_and_ref_ethernet(type_info->address, dev_interface_num);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_ethernet(nii, type_info->address, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: ethernet iface established\n", nii);
return nii;
}
#ifdef ECM_INTERFACE_PPP_ENABLE
/*
* ecm_interface_pppoe_interface_establish()
* Returns a reference to a iface of the PPPoE type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_pppoe_interface_establish(struct ecm_db_interface_info_pppoe *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish PPPoE iface: %s with session id: %u, remote mac: %pM, MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->pppoe_session_id, type_info->remote_mac, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_pppoe(type_info->pppoe_session_id, type_info->remote_mac);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_pppoe(type_info->pppoe_session_id, type_info->remote_mac);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_pppoe(nii, type_info->pppoe_session_id, type_info->remote_mac, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: pppoe iface established\n", nii);
return nii;
}
#endif
/*
* ecm_interface_unknown_interface_establish()
* Returns a reference to a iface of the UNKNOWN type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_unknown_interface_establish(struct ecm_db_interface_info_unknown *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish UNKNOWN iface: %s with os_specific_ident: %u, MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->os_specific_ident, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_unknown(type_info->os_specific_ident);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_unknown(type_info->os_specific_ident);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_unknown(nii, type_info->os_specific_ident, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: unknown iface established\n", nii);
return nii;
}
/*
* ecm_interface_loopback_interface_establish()
* Returns a reference to a iface of the LOOPBACK type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_loopback_interface_establish(struct ecm_db_interface_info_loopback *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish LOOPBACK iface: %s with os_specific_ident: %u, MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->os_specific_ident, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_loopback(type_info->os_specific_ident);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_loopback(type_info->os_specific_ident);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_loopback(nii, type_info->os_specific_ident, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: loopback iface established\n", nii);
return nii;
}
#ifdef ECM_INTERFACE_IPSEC_ENABLE
/*
* ecm_interface_ipsec_tunnel_interface_establish()
* Returns a reference to a iface of the IPSEC_TUNNEL type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*
* NOTE: GGG TODO THIS NEEDS TO TAKE A PROPER APPROACH TO IPSEC TUNNELS USING ENDPOINT ADDRESSING AS THE TYPE INFO KEYS
*/
static struct ecm_db_iface_instance *ecm_interface_ipsec_tunnel_interface_establish(struct ecm_db_interface_info_ipsec_tunnel *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish IPSEC_TUNNEL iface: %s with os_specific_ident: %u, MTU: %d, if num: %d, nss if id: %d\n",
dev_name, type_info->os_specific_ident, mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_ipsec_tunnel(type_info->os_specific_ident);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_ipsec_tunnel(type_info->os_specific_ident);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_ipsec_tunnel(nii, type_info->os_specific_ident, dev_name,
mtu, dev_interface_num, nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: ipsec_tunnel iface established\n", nii);
return nii;
}
#endif
#ifdef ECM_INTERFACE_SIT_ENABLE
#ifdef CONFIG_IPV6_SIT_6RD
/*
* ecm_interface_sit_interface_establish()
* Returns a reference to a iface of the SIT type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_sit_interface_establish(struct ecm_db_interface_info_sit *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish SIT iface: %s with saddr: " ECM_IP_ADDR_OCTAL_FMT ", daddr: " ECM_IP_ADDR_OCTAL_FMT ", MTU: %d, if num: %d, nss if id: %d\n",
dev_name, ECM_IP_ADDR_TO_OCTAL(type_info->saddr), ECM_IP_ADDR_TO_OCTAL(type_info->daddr), mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_sit(type_info->saddr, type_info->daddr);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_sit(type_info->saddr, type_info->daddr);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_sit(nii, type_info, dev_name, mtu, dev_interface_num,
nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: sit iface established\n", nii);
return nii;
}
#endif
#endif
#ifdef ECM_INTERFACE_TUNIPIP6_ENABLE
#ifdef ECM_IPV6_ENABLE
/*
* ecm_interface_tunipip6_interface_establish()
* Returns a reference to a iface of the TUNIPIP6 type, possibly creating one if necessary.
* Returns NULL on failure or a reference to interface.
*/
static struct ecm_db_iface_instance *ecm_interface_tunipip6_interface_establish(struct ecm_db_interface_info_tunipip6 *type_info,
char *dev_name, int32_t dev_interface_num, int32_t nss_interface_num, int32_t mtu)
{
struct ecm_db_iface_instance *nii;
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Establish TUNIPIP6 iface: %s with saddr: " ECM_IP_ADDR_OCTAL_FMT ", daddr: " ECM_IP_ADDR_OCTAL_FMT ", MTU: %d, if num: %d, nss if id: %d\n",
dev_name, ECM_IP_ADDR_TO_OCTAL(type_info->saddr), ECM_IP_ADDR_TO_OCTAL(type_info->daddr), mtu, dev_interface_num, nss_interface_num);
/*
* Locate the iface
*/
ii = ecm_db_iface_find_and_ref_tunipip6(type_info->saddr, type_info->daddr);
if (ii) {
DEBUG_TRACE("%p: iface established\n", ii);
return ii;
}
/*
* No iface - create one
*/
nii = ecm_db_iface_alloc();
if (!nii) {
DEBUG_WARN("Failed to establish iface\n");
return NULL;
}
/*
* Add iface into the database, atomically to avoid races creating the same thing
*/
spin_lock_bh(&ecm_interface_lock);
ii = ecm_db_iface_find_and_ref_tunipip6(type_info->saddr, type_info->daddr);
if (ii) {
spin_unlock_bh(&ecm_interface_lock);
ecm_db_iface_deref(nii);
return ii;
}
ecm_db_iface_add_tunipip6(nii, type_info, dev_name, mtu, dev_interface_num,
nss_interface_num, NULL, nii);
spin_unlock_bh(&ecm_interface_lock);
DEBUG_TRACE("%p: tunipip6 iface established\n", nii);
return nii;
}
#endif
#endif
/*
* ecm_interface_establish_and_ref()
* Establish an interface instance for the given interface detail.
*/
struct ecm_db_iface_instance *ecm_interface_establish_and_ref(struct net_device *dev)
{
int32_t dev_interface_num;
char *dev_name;
int32_t dev_type;
int32_t dev_mtu;
int32_t nss_interface_num;
struct ecm_db_iface_instance *ii;
union {
struct ecm_db_interface_info_ethernet ethernet; /* type == ECM_DB_IFACE_TYPE_ETHERNET */
#ifdef ECM_INTERFACE_VLAN_ENABLE
struct ecm_db_interface_info_vlan vlan; /* type == ECM_DB_IFACE_TYPE_VLAN */
#endif
#ifdef ECM_INTERFACE_BOND_ENABLE
struct ecm_db_interface_info_lag lag; /* type == ECM_DB_IFACE_TYPE_LAG */
#endif
struct ecm_db_interface_info_bridge bridge; /* type == ECM_DB_IFACE_TYPE_BRIDGE */
#ifdef ECM_INTERFACE_PPP_ENABLE
struct ecm_db_interface_info_pppoe pppoe; /* type == ECM_DB_IFACE_TYPE_PPPOE */
#endif
struct ecm_db_interface_info_unknown unknown; /* type == ECM_DB_IFACE_TYPE_UNKNOWN */
struct ecm_db_interface_info_loopback loopback; /* type == ECM_DB_IFACE_TYPE_LOOPBACK */
#ifdef ECM_INTERFACE_IPSEC_ENABLE
struct ecm_db_interface_info_ipsec_tunnel ipsec_tunnel; /* type == ECM_DB_IFACE_TYPE_IPSEC_TUNNEL */
#endif
#ifdef ECM_INTERFACE_SIT_ENABLE
struct ecm_db_interface_info_sit sit; /* type == ECM_DB_IFACE_TYPE_SIT */
#endif
#ifdef ECM_INTERFACE_TUNIPIP6_ENABLE
#ifdef ECM_IPV6_ENABLE
struct ecm_db_interface_info_tunipip6 tunipip6; /* type == ECM_DB_IFACE_TYPE_TUNIPIP6 */
#endif
#endif
} type_info;
#ifdef ECM_INTERFACE_PPP_ENABLE
int channel_count;
struct ppp_channel *ppp_chan[1];
int channel_protocol;
struct pppoe_opt addressing;
#endif
/*
* Get basic information about the given device
*/
dev_interface_num = dev->ifindex;
dev_name = dev->name;
dev_type = dev->type;
dev_mtu = dev->mtu;
/*
* Does the NSS recognise this interface?
*/
nss_interface_num = nss_cmn_get_interface_number_by_dev(dev);
DEBUG_TRACE("Establish interface instance for device: %p is type: %d, name: %s, ifindex: %d, nss_if: %d, mtu: %d\n",
dev, dev_type, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
/*
* Extract from the device more type-specific information
*/
if (dev_type == ARPHRD_ETHER) {
/*
* Ethernet - but what sub type?
*/
#ifdef ECM_INTERFACE_VLAN_ENABLE
/*
* VLAN?
*/
if (is_vlan_dev(dev)) {
/*
* VLAN master
* GGG No locking needed here, ASSUMPTION is that real_dev is held for as long as we have dev.
*/
memcpy(type_info.vlan.address, dev->dev_addr, 6);
type_info.vlan.vlan_tag = vlan_dev_vlan_id(dev);
type_info.vlan.vlan_tpid = VLAN_CTAG_TPID;
DEBUG_TRACE("Net device: %p is VLAN, mac: %pM, vlan_id: %x vlan_tpid: %x\n",
dev, type_info.vlan.address, type_info.vlan.vlan_tag, type_info.vlan.vlan_tpid);
/*
* Establish this type of interface
*/
ii = ecm_interface_vlan_interface_establish(&type_info.vlan, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#endif
/*
* BRIDGE?
*/
if (ecm_front_end_is_bridge_device(dev)) {
/*
* Bridge
*/
memcpy(type_info.bridge.address, dev->dev_addr, 6);
DEBUG_TRACE("Net device: %p is BRIDGE, mac: %pM\n",
dev, type_info.bridge.address);
/*
* Establish this type of interface
*/
ii = ecm_interface_bridge_interface_establish(&type_info.bridge, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#ifdef ECM_INTERFACE_BOND_ENABLE
/*
* LAG?
*/
if (ecm_front_end_is_lag_master(dev)) {
/*
* Link aggregation
*/
memcpy(type_info.lag.address, dev->dev_addr, 6);
DEBUG_TRACE("Net device: %p is LAG, mac: %pM\n",
dev, type_info.lag.address);
/*
* Establish this type of interface
*/
ii = ecm_interface_lag_interface_establish(&type_info.lag, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#endif
/*
* ETHERNET!
* Just plain ethernet it seems
*/
memcpy(type_info.ethernet.address, dev->dev_addr, 6);
DEBUG_TRACE("Net device: %p is ETHERNET, mac: %pM\n",
dev, type_info.ethernet.address);
/*
* Establish this type of interface
*/
ii = ecm_interface_ethernet_interface_establish(&type_info.ethernet, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
/*
* LOOPBACK?
*/
if (dev_type == ARPHRD_LOOPBACK) {
DEBUG_TRACE("Net device: %p is LOOPBACK type: %d\n", dev, dev_type);
type_info.loopback.os_specific_ident = dev_interface_num;
ii = ecm_interface_loopback_interface_establish(&type_info.loopback, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#ifdef ECM_INTERFACE_IPSEC_ENABLE
/*
* IPSEC?
*/
if (dev_type == ECM_ARPHRD_IPSEC_TUNNEL_TYPE) {
DEBUG_TRACE("Net device: %p is IPSec tunnel type: %d\n", dev, dev_type);
type_info.ipsec_tunnel.os_specific_ident = dev_interface_num;
/*
* nss_interface_num for all IPsec tunnels will always be NSS_C2C_TX_INTERFACE
*/
nss_interface_num = NSS_C2C_TX_INTERFACE;
// GGG TODO Flesh this out with tunnel endpoint addressing detail
ii = ecm_interface_ipsec_tunnel_interface_establish(&type_info.ipsec_tunnel, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#endif
#ifdef ECM_INTERFACE_SIT_ENABLE
#ifdef CONFIG_IPV6_SIT_6RD
/*
* SIT (6-in-4)?
*/
if (dev_type == ARPHRD_SIT) {
struct ip_tunnel *tunnel;
struct ip_tunnel_6rd_parm *ip6rd;
const struct iphdr *tiph;
DEBUG_TRACE("Net device: %p is SIT (6-in-4) type: %d\n", dev, dev_type);
tunnel = (struct ip_tunnel*)netdev_priv(dev);
ip6rd = &tunnel->ip6rd;
/*
* Get the Tunnel device IP header info
*/
tiph = &tunnel->parms.iph ;
type_info.sit.prefixlen = ip6rd->prefixlen;
type_info.sit.relay_prefix = ip6rd->relay_prefix;
type_info.sit.relay_prefixlen = ip6rd->relay_prefixlen;
ECM_NIN4_ADDR_TO_IP_ADDR(type_info.sit.saddr, tiph->saddr);
ECM_NIN4_ADDR_TO_IP_ADDR(type_info.sit.daddr, tiph->daddr);
type_info.sit.prefix[0] = ntohl(ip6rd->prefix.s6_addr32[0]);
type_info.sit.prefix[1] = ntohl(ip6rd->prefix.s6_addr32[1]);
type_info.sit.prefix[2] = ntohl(ip6rd->prefix.s6_addr32[2]);
type_info.sit.prefix[3] = ntohl(ip6rd->prefix.s6_addr32[3]);
type_info.sit.ttl = tiph->ttl;
type_info.sit.tos = tiph->tos;
ii = ecm_interface_sit_interface_establish(&type_info.sit, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#endif
#endif
#ifdef ECM_INTERFACE_TUNIPIP6_ENABLE
#ifdef ECM_IPV6_ENABLE
/*
* IPIP6 Tunnel?
*/
if (dev_type == ARPHRD_TUNNEL6) {
struct ip6_tnl *tunnel;
struct flowi6 *fl6;
DEBUG_TRACE("Net device: %p is TUNIPIP6 type: %d\n", dev, dev_type);
/*
* Get the tunnel device flow information (discover the output path of the tunnel)
*/
tunnel = (struct ip6_tnl *)netdev_priv(dev);
fl6 = &tunnel->fl.u.ip6;
ECM_NIN6_ADDR_TO_IP_ADDR(type_info.tunipip6.saddr, fl6->saddr);
ECM_NIN6_ADDR_TO_IP_ADDR(type_info.tunipip6.daddr, fl6->daddr);
type_info.tunipip6.hop_limit = tunnel->parms.hop_limit;
type_info.tunipip6.flags = ntohl(tunnel->parms.flags);
type_info.tunipip6.flowlabel = fl6->flowlabel; /* flow Label In kernel is stored in big endian format */
ii = ecm_interface_tunipip6_interface_establish(&type_info.tunipip6, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#endif
#endif
/*
* If this is NOT PPP then it is unknown to the ecm
*/
if (dev_type != ARPHRD_PPP) {
DEBUG_TRACE("Net device: %p is UNKNOWN type: %d\n", dev, dev_type);
type_info.unknown.os_specific_ident = dev_interface_num;
/*
* Establish this type of interface
*/
ii = ecm_interface_unknown_interface_establish(&type_info.unknown, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
#ifndef ECM_INTERFACE_PPP_ENABLE
/*
* PPP support is NOT provided for.
* Interface is therefore unknown
*/
DEBUG_TRACE("Net device: %p is UNKNOWN (PPP Unsupported) type: %d\n", dev, dev_type);
type_info.unknown.os_specific_ident = dev_interface_num;
/*
* Establish this type of interface
*/
ii = ecm_interface_unknown_interface_establish(&type_info.unknown, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
#else
/*
* PPP - but what is the channel type?
* First: If this is multi-link then we do not support it
*/
if (ppp_is_multilink(dev) > 0) {
DEBUG_TRACE("Net device: %p is MULTILINK PPP - Unknown to the ECM\n", dev);
type_info.unknown.os_specific_ident = dev_interface_num;
/*
* Establish this type of interface
*/
ii = ecm_interface_unknown_interface_establish(&type_info.unknown, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
DEBUG_TRACE("Net device: %p is PPP\n", dev);
/*
* Get the PPP channel and then enquire what kind of channel it is
* NOTE: Not multilink so only one channel to get.
*/
channel_count = ppp_hold_channels(dev, ppp_chan, 1);
if (channel_count != 1) {
DEBUG_TRACE("Net device: %p PPP has %d channels - ECM cannot handle this (interface becomes Unknown type)\n",
dev, channel_count);
type_info.unknown.os_specific_ident = dev_interface_num;
/*
* Establish this type of interface
*/
ii = ecm_interface_unknown_interface_establish(&type_info.unknown, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
/*
* Get channel protocol type
* NOTE: Not all PPP channels support channel specific methods.
*/
channel_protocol = ppp_channel_get_protocol(ppp_chan[0]);
if (channel_protocol != PX_PROTO_OE) {
DEBUG_TRACE("Net device: %p PPP channel protocol: %d - Unknown to the ECM\n", dev, channel_protocol);
type_info.unknown.os_specific_ident = dev_interface_num;
/*
* Release the channel
*/
ppp_release_channels(ppp_chan, 1);
/*
* Establish this type of interface
*/
ii = ecm_interface_unknown_interface_establish(&type_info.unknown, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
}
/*
* PPPoE channel
*/
DEBUG_TRACE("Net device: %p PPP channel is PPPoE\n", dev);
/*
* Get PPPoE session information and the underlying device it is using.
*/
pppoe_channel_addressing_get(ppp_chan[0], &addressing);
type_info.pppoe.pppoe_session_id = (uint16_t)ntohs((uint16_t)addressing.pa.sid);
memcpy(type_info.pppoe.remote_mac, addressing.pa.remote, ETH_ALEN);
dev_put(addressing.dev);
/*
* Release the channel. Note that next_dev is still (correctly) held.
*/
ppp_release_channels(ppp_chan, 1);
DEBUG_TRACE("Net device: %p PPPoE session: %x, remote mac: %pM\n",
dev, type_info.pppoe.pppoe_session_id, type_info.pppoe.remote_mac);
/*
* Establish this type of interface
*/
ii = ecm_interface_pppoe_interface_establish(&type_info.pppoe, dev_name, dev_interface_num, nss_interface_num, dev_mtu);
return ii;
#endif
}
EXPORT_SYMBOL(ecm_interface_establish_and_ref);
/*
* ecm_interface_heirarchy_construct()
* Construct an interface heirarchy.
*
* Using the given addressing, locate the interface heirarchy used to emit packets to that destination.
* This is the heirarchy of interfaces a packet would transit to emit from the device.
*
* We will use the given src/dest devices when is_routed is false.
* When is_routed is true we will try routing tables first, failing back to any given.
*
* For example, with this network arrangement:
*
* PPPoE--VLAN--BRIDGE--BRIDGE_PORT(LAG_MASTER)--LAG_SLAVE_0--10.22.33.11
*
* Given the packet_dest_addr IP address 10.22.33.11 this will create an interface heirarchy (in interracfes[]) of:
* LAG_SLAVE_0 @ [ECM_DB_IFACE_HEIRARCHY_MAX - 5]
* LAG_MASTER @ [ECM_DB_IFACE_HEIRARCHY_MAX - 4]
* BRIDGE @ [ECM_DB_IFACE_HEIRARCHY_MAX - 3]
* VLAN @ [ECM_DB_IFACE_HEIRARCHY_MAX - 2]
* PPPOE @ [ECM_DB_IFACE_HEIRARCHY_MAX - 1]
* The value returned is (ECM_DB_IFACE_HEIRARCHY_MAX - 5)
*
* IMPORTANT: This function will return any known interfaces in the database, when interfaces do not exist in the database
* they will be created and added automatically to the database.
*
* GGG TODO Make this function work for IPv6!!!!!!!!!!!!!!
*/
int32_t ecm_interface_heirarchy_construct(struct ecm_db_iface_instance *interfaces[], ip_addr_t packet_src_addr, ip_addr_t packet_dest_addr, int packet_protocol,
struct net_device *given_dest_dev, bool is_routed, struct net_device *given_src_dev, uint8_t *dest_node_addr, uint8_t *src_node_addr)
{
int protocol;
ip_addr_t src_addr;
ip_addr_t dest_addr;
struct net_device *dest_dev;
char *dest_dev_name;
int32_t dest_dev_type;
struct net_device *src_dev;
char *src_dev_name;
int32_t src_dev_type;
int32_t current_interface_index;
bool from_local_addr;
/*
* Get a big endian of the IPv4 address we have been given as our starting point.
*/
protocol = packet_protocol;
ECM_IP_ADDR_COPY(src_addr, packet_src_addr);
ECM_IP_ADDR_COPY(dest_addr, packet_dest_addr);
DEBUG_TRACE("Construct interface heirarchy for from src_addr: " ECM_IP_ADDR_DOT_FMT " to dest_addr: " ECM_IP_ADDR_DOT_FMT ", protocol: %d\n",
ECM_IP_ADDR_TO_DOT(src_addr), ECM_IP_ADDR_TO_DOT(dest_addr), protocol);
/*
* Get device to reach the given destination address.
* If the heirarchy is for a routed connection we must try route lookup first, falling back to any given_dest_dev.
* If the heirarchy is NOT for a routed connection we try the given_dest_dev first, followed by routed lookup.
*/
from_local_addr = false;
if (is_routed) {
dest_dev = ecm_interface_dev_find_by_addr(dest_addr, &from_local_addr);
if (!dest_dev && given_dest_dev) {
/*
* Fall back to any given
*/
dest_dev = given_dest_dev;
dev_hold(dest_dev);
}
} else if (given_dest_dev) {
dest_dev = given_dest_dev;
dev_hold(dest_dev);
} else {
/*
* Fall back to routed look up
*/
dest_dev = ecm_interface_dev_find_by_addr(dest_addr, &from_local_addr);
}
/*
* GGG ALERT: If the address is a local address and protocol is an IP tunnel
* then this connection is a tunnel endpoint made to this device.
* In which case we circumvent all proper procedure and just hack the devices to make stuff work.
* GGG TODO THIS MUST BE FIXED - WE MUST USE THE INTERFACE HIERARCHY FOR ITS INTENDED PURPOSE TO
* PARSE THE DEVICES AND WORK OUT THE PROPER INTERFACES INVOLVED.
* E.G. IF WE TRIED TO RUN A TUNNEL OVER A VLAN OR QINQ THIS WILL BREAK AS WE DON'T DISCOVER THAT HIERARCHY
*/
if (dest_dev && from_local_addr && (protocol == IPPROTO_IPV6)) {
dev_put(dest_dev);
dest_dev = given_dest_dev;
if (dest_dev) {
dev_hold(dest_dev);
DEBUG_TRACE("HACK: IPV6 tunnel packet with dest_addr: " ECM_IP_ADDR_OCTAL_FMT " uses dev: %p(%s)\n", ECM_IP_ADDR_TO_OCTAL(dest_addr), dest_dev, dest_dev->name);
}
}
if (!dest_dev) {
DEBUG_WARN("dest_addr: " ECM_IP_ADDR_OCTAL_FMT " - cannot locate device\n", ECM_IP_ADDR_TO_OCTAL(dest_addr));
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
dest_dev_name = dest_dev->name;
dest_dev_type = dest_dev->type;
/*
* Get device to reach the given source address.
* If the heirarchy is for a routed connection we must try route lookup first, falling back to any given_src_dev.
* If the heirarchy is NOT for a routed connection we try the given_src_dev first, followed by routed lookup.
*/
from_local_addr = false;
if (is_routed) {
src_dev = ecm_interface_dev_find_by_addr(src_addr, &from_local_addr);
if (!src_dev && given_src_dev) {
/*
* Fall back to any given
*/
src_dev = given_src_dev;
dev_hold(src_dev);
}
} else if (given_src_dev) {
src_dev = given_src_dev;
dev_hold(src_dev);
} else {
/*
* Fall back to routed look up
*/
src_dev = ecm_interface_dev_find_by_addr(src_addr, &from_local_addr);
}
/*
* GGG ALERT: If the address is a local address and protocol is an IP tunnel
* then this connection is a tunnel endpoint made to this device.
* In which case we circumvent all proper procedure and just hack the devices to make stuff work.
* GGG TODO THIS MUST BE FIXED - WE MUST USE THE INTERFACE HIERARCHY FOR ITS INTENDED PURPOSE TO
* PARSE THE DEVICES AND WORK OUT THE PROPER INTERFACES INVOLVED.
* E.G. IF WE TRIED TO RUN A TUNNEL OVER A VLAN OR QINQ THIS WILL BREAK AS WE DON'T DISCOVER THAT HIERARCHY
*/
if (src_dev && from_local_addr && (protocol == IPPROTO_IPV6)) {
dev_put(src_dev);
src_dev = given_src_dev;
if (src_dev) {
dev_hold(src_dev);
DEBUG_TRACE("HACK: IPV6 tunnel packet with src_addr: " ECM_IP_ADDR_OCTAL_FMT " uses dev: %p(%s)\n", ECM_IP_ADDR_TO_OCTAL(src_addr), src_dev, src_dev->name);
}
}
if (!src_dev) {
DEBUG_WARN("src_addr: " ECM_IP_ADDR_OCTAL_FMT " - cannot locate device\n", ECM_IP_ADDR_TO_OCTAL(src_addr));
dev_put(dest_dev);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
src_dev_name = src_dev->name;
src_dev_type = src_dev->type;
/*
* Check if source and dest dev are same.
* For the forwarded flows which involve tunnels this will happen when called from input hook.
*/
if (src_dev == dest_dev) {
DEBUG_TRACE("Protocol is :%d source dev and dest dev are same\n", protocol);
if ((protocol == IPPROTO_IPV6) || (protocol == IPPROTO_ESP)) {
/*
* This happens from the input hook
* We do not want to create a connection entry for this
* GGG TODO YES WE DO.
* GGG TODO THIS CONCERNS ME AS THIS SHOULD BE CAUGHT MUCH
* EARLIER IN THE FRONT END IF POSSIBLE TO AVOID PERFORMANCE PENALTIES.
* WE HAVE DONE A TREMENDOUS AMOUT OF WORK TO GET TO THIS POINT.
* WE WILL ABORT HERE AND THIS WILL BE REPEATED FOR EVERY PACKET.
* IN KEEPING WITH THE ECM DESIGN IT IS BETTER TO CREATE A CONNECTION AND RECORD IN THE HIERARCHY
* ENOUGH INFORMATION TO ENSURE THAT ACCELERATION IS NOT BROKEN / DOES NOT OCCUR AT ALL.
* THAT WAY WE DO A HEAVYWEIGHT ESTABLISHING OF A CONNECTION ONCE AND NEVER AGAIN...
*/
dev_put(src_dev);
dev_put(dest_dev);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
}
/*
* Iterate until we are done or get to the max number of interfaces we can record.
* NOTE: current_interface_index tracks the position of the first interface position in interfaces[]
* because we add from the end first_interface grows downwards.
*/
current_interface_index = ECM_DB_IFACE_HEIRARCHY_MAX;
while (current_interface_index > 0) {
struct ecm_db_iface_instance *ii;
struct net_device *next_dev;
/*
* Get the ecm db interface instance for the device at hand
*/
ii = ecm_interface_establish_and_ref(dest_dev);
/*
* If the interface could not be established then we abort
*/
if (!ii) {
DEBUG_WARN("Failed to establish interface: %p, name: %s\n", dest_dev, dest_dev_name);
dev_put(src_dev);
dev_put(dest_dev);
/*
* Release the interfaces heirarchy we constructed to this point.
*/
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
/*
* Record the interface instance into the interfaces[]
*/
current_interface_index--;
interfaces[current_interface_index] = ii;
/*
* Now we have to figure out what the next device will be (in the transmission path) the skb
* will use to emit to the destination address.
*/
do {
#ifdef ECM_INTERFACE_PPP_ENABLE
int channel_count;
struct ppp_channel *ppp_chan[1];
int channel_protocol;
struct pppoe_opt addressing;
#endif
DEBUG_TRACE("Net device: %p is type: %d, name: %s\n", dest_dev, dest_dev_type, dest_dev_name);
next_dev = NULL;
if (dest_dev_type == ARPHRD_ETHER) {
/*
* Ethernet - but what sub type?
*/
#ifdef ECM_INTERFACE_VLAN_ENABLE
/*
* VLAN?
*/
if (is_vlan_dev(dest_dev)) {
/*
* VLAN master
* No locking needed here, ASSUMPTION is that real_dev is held for as long as we have dev.
*/
next_dev = vlan_dev_real_dev(dest_dev);
dev_hold(next_dev);
DEBUG_TRACE("Net device: %p is VLAN, slave dev: %p (%s)\n",
dest_dev, next_dev, next_dev->name);
break;
}
#endif
/*
* BRIDGE?
*/
if (ecm_front_end_is_bridge_device(dest_dev)) {
/*
* Bridge
* Figure out which port device the skb will go to using the dest_addr.
*/
bool on_link;
ip_addr_t gw_addr = ECM_IP_ADDR_NULL;
uint8_t mac_addr[ETH_ALEN];
if (!ecm_interface_mac_addr_get(dest_addr, mac_addr, &on_link, gw_addr)) {
/*
* Possible ARP does not know the address yet
*/
DEBUG_INFO("Unable to obtain MAC address for " ECM_IP_ADDR_DOT_FMT "\n", ECM_IP_ADDR_TO_DOT(dest_addr));
if (ECM_IP_ADDR_IS_V4(dest_addr)) {
__be32 ipv4_addr;
__be32 src_ip;
/*
* Issue an ARP request for it, select the src_ip from which to issue the request.
*/
ECM_IP_ADDR_TO_NIN4_ADDR(ipv4_addr, dest_addr);
src_ip = inet_select_addr(dest_dev, ipv4_addr, RT_SCOPE_LINK);
if (!src_ip) {
DEBUG_TRACE("failed to lookup IP for %pI4\n", &ipv4_addr);
dev_put(src_dev);
dev_put(dest_dev);
/*
* Release the interfaces heirarchy we constructed to this point.
*/
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
/*
* If we have a GW for this address, then we have to send ARP request to the GW
*/
if (!on_link && !ECM_IP_ADDR_IS_NULL(gw_addr)) {
ECM_IP_ADDR_TO_NIN4_ADDR(ipv4_addr, gw_addr);
}
DEBUG_TRACE("Send ARP for %pI4 using src_ip as %pI4\n", &ipv4_addr, &src_ip);
arp_send(ARPOP_REQUEST, ETH_P_ARP, ipv4_addr, dest_dev, src_ip, NULL, NULL, NULL);
}
DEBUG_WARN("Unable to obtain MAC address for " ECM_IP_ADDR_DOT_FMT "\n", ECM_IP_ADDR_TO_DOT(dest_addr));
dev_put(src_dev);
dev_put(dest_dev);
/*
* Release the interfaces heirarchy we constructed to this point.
*/
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
next_dev = br_port_dev_get(dest_dev, mac_addr);
if (!next_dev) {
DEBUG_WARN("Unable to obtain output port for: %pM\n", mac_addr);
dev_put(src_dev);
dev_put(dest_dev);
/*
* Release the interfaces heirarchy we constructed to this point.
*/
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
DEBUG_TRACE("Net device: %p is BRIDGE, next_dev: %p (%s)\n", dest_dev, next_dev, next_dev->name);
break;
}
#ifdef ECM_INTERFACE_BOND_ENABLE
/*
* LAG?
*/
if (ecm_front_end_is_lag_master(dest_dev)) {
/*
* Link aggregation
* Figure out whiich slave device of the link aggregation will be used to reach the destination.
*/
bool dest_on_link = false;
ip_addr_t dest_gw_addr = ECM_IP_ADDR_NULL;
uint32_t src_addr_32 = 0;
uint32_t dest_addr_32 = 0;
uint8_t src_mac_addr[ETH_ALEN];
uint8_t dest_mac_addr[ETH_ALEN];
struct net_device *master_dev = NULL;
memset(src_mac_addr, 0, ETH_ALEN);
memset(dest_mac_addr, 0, ETH_ALEN);
ECM_IP_ADDR_TO_NIN4_ADDR(src_addr_32, src_addr);
ECM_IP_ADDR_TO_NIN4_ADDR(dest_addr_32, dest_addr);
if (!is_routed) {
memcpy(src_mac_addr, src_node_addr, ETH_ALEN);
memcpy(dest_mac_addr, dest_node_addr, ETH_ALEN);
} else {
struct net_device *dest_dev_master;
/*
* Use appropriate source MAC address for routed packets
*/
dest_dev_master = ecm_interface_get_and_hold_dev_master(dest_dev);
if (dest_dev_master) {
memcpy(src_mac_addr, dest_dev_master->dev_addr, ETH_ALEN);
} else {
memcpy(src_mac_addr, dest_dev->dev_addr, ETH_ALEN);
}
/*
* Determine destination MAC address for this routed packet
*/
if (!ecm_interface_mac_addr_get(dest_addr, dest_mac_addr,
&dest_on_link, dest_gw_addr)) {
__be32 ipv4_addr = 0;
__be32 src_ip = 0;
DEBUG_WARN("Unable to obtain MAC address for "
ECM_IP_ADDR_DOT_FMT "\n", ECM_IP_ADDR_TO_DOT(dest_addr));
/*
* Issue an ARP request, select the src_ip from which to issue the request.
*/
/*
* find proper interfce from which to issue ARP
*/
if (dest_dev_master) {
master_dev = dest_dev_master;
} else {
master_dev = dest_dev;
}
dev_hold(master_dev);
if (dest_dev_master) {
dev_put(dest_dev_master);
}
ECM_IP_ADDR_TO_NIN4_ADDR(ipv4_addr, dest_addr);
src_ip = inet_select_addr(master_dev, ipv4_addr, RT_SCOPE_LINK);
if (!src_ip) {
DEBUG_TRACE("failed to lookup IP for %pI4\n", &ipv4_addr);
dev_put(src_dev);
dev_put(dest_dev);
dev_put(master_dev);
/*
* Release the interfaces heirarchy we constructed to this point.
*/
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
/*
* If we have a GW for this address, then we have to send ARP request to the GW
*/
if (!dest_on_link && !ECM_IP_ADDR_IS_NULL(dest_gw_addr)) {
ECM_IP_ADDR_TO_NIN4_ADDR(ipv4_addr, dest_gw_addr);
}
DEBUG_TRACE("Send ARP for %pI4 using src_ip as %pI4\n", &ipv4_addr, &src_ip);
arp_send(ARPOP_REQUEST, ETH_P_ARP, ipv4_addr, master_dev, src_ip, NULL, NULL, NULL);
dev_put(src_dev);
dev_put(dest_dev);
dev_put(master_dev);
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
if (dest_dev_master) {
dev_put(dest_dev_master);
}
}
next_dev = bond_get_tx_dev(NULL, src_mac_addr, dest_mac_addr,
&src_addr_32, &dest_addr_32,
htons((uint16_t)ETH_P_IP), dest_dev);
if (next_dev && netif_carrier_ok(next_dev)) {
dev_hold(next_dev);
} else {
DEBUG_WARN("Unable to obtain LAG output slave device\n");
dev_put(src_dev);
dev_put(dest_dev);
/*
* Release the interfaces heirarchy we constructed to this point.
*/
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
DEBUG_TRACE("Net device: %p is LAG, slave dev: %p (%s)\n", dest_dev, next_dev, next_dev->name);
break;
}
#endif
/*
* ETHERNET!
* Just plain ethernet it seems.
*/
DEBUG_TRACE("Net device: %p is ETHERNET\n", dest_dev);
break;
}
/*
* LOOPBACK?
*/
if (dest_dev_type == ARPHRD_LOOPBACK) {
DEBUG_TRACE("Net device: %p is LOOPBACK type: %d\n", dest_dev, dest_dev_type);
break;
}
/*
* IPSEC?
*/
if (dest_dev_type == ECM_ARPHRD_IPSEC_TUNNEL_TYPE) {
DEBUG_TRACE("Net device: %p is IPSec tunnel type: %d\n", dest_dev, dest_dev_type);
// GGG TODO Figure out the next device the tunnel is using...
break;
}
/*
* SIT (6-in-4)?
*/
if (dest_dev_type == ARPHRD_SIT) {
DEBUG_TRACE("Net device: %p is SIT (6-in-4) type: %d\n", dest_dev, dest_dev_type);
// GGG TODO Figure out the next device the tunnel is using...
break;
}
/*
* IPIP6 Tunnel?
*/
if (dest_dev_type == ARPHRD_TUNNEL6) {
DEBUG_TRACE("Net device: %p is TUNIPIP6 type: %d\n", dest_dev, dest_dev_type);
// GGG TODO Figure out the next device the tunnel is using...
break;
}
/*
* If this is NOT PPP then it is unknown to the ecm and we cannot figure out it's next device.
*/
if (dest_dev_type != ARPHRD_PPP) {
DEBUG_TRACE("Net device: %p is UNKNOWN type: %d\n", dest_dev, dest_dev_type);
break;
}
#ifndef ECM_INTERFACE_PPP_ENABLE
DEBUG_TRACE("Net device: %p is UNKNOWN (PPP Unsupported) type: %d\n", dest_dev, dest_dev_type);
#else
/*
* PPP - but what is the channel type?
* First: If this is multi-link then we do not support it
*/
if (ppp_is_multilink(dest_dev) > 0) {
DEBUG_TRACE("Net device: %p is MULTILINK PPP - Unknown to the ECM\n", dest_dev);
break;
}
DEBUG_TRACE("Net device: %p is PPP\n", dest_dev);
/*
* Get the PPP channel and then enquire what kind of channel it is
* NOTE: Not multilink so only one channel to get.
*/
channel_count = ppp_hold_channels(dest_dev, ppp_chan, 1);
if (channel_count != 1) {
DEBUG_TRACE("Net device: %p PPP has %d channels - Unknown to the ECM\n",
dest_dev, channel_count);
break;
}
/*
* Get channel protocol type
* NOTE: Not all PPP channels support channel specific methods.
*/
channel_protocol = ppp_channel_get_protocol(ppp_chan[0]);
if (channel_protocol != PX_PROTO_OE) {
DEBUG_TRACE("Net device: %p PPP channel protocol: %d - Unknown to the ECM\n",
dest_dev, channel_protocol);
/*
* Release the channel
*/
ppp_release_channels(ppp_chan, 1);
break;
}
/*
* PPPoE channel
*/
DEBUG_TRACE("Net device: %p PPP channel is PPPoE\n", dest_dev);
/*
* Get PPPoE session information and the underlying device it is using.
*/
pppoe_channel_addressing_get(ppp_chan[0], &addressing);
/*
* Copy the dev hold into this, we will release the hold later
*/
next_dev = addressing.dev;
DEBUG_TRACE("Net device: %p, next device: %p (%s)\n", dest_dev, next_dev, next_dev->name);
/*
* Release the channel. Note that next_dev is still (correctly) held.
*/
ppp_release_channels(ppp_chan, 1);
#endif
} while (false);
/*
* No longer need dest_dev as it may become next_dev
*/
dev_put(dest_dev);
/*
* Check out the next_dev, if any
*/
if (!next_dev) {
int32_t i __attribute__((unused));
DEBUG_INFO("Completed interface heirarchy construct with first interface @: %d\n", current_interface_index);
#if DEBUG_LEVEL > 1
for (i = current_interface_index; i < ECM_DB_IFACE_HEIRARCHY_MAX; ++i) {
DEBUG_TRACE("\tInterface @ %d: %p, type: %d, name: %s\n",
i, interfaces[i], ecm_db_connection_iface_type_get(interfaces[i]), ecm_db_interface_type_to_string(ecm_db_connection_iface_type_get(interfaces[i])));
}
#endif
/*
* Release src_dev now
*/
dev_put(src_dev);
return current_interface_index;
}
/*
* dest_dev becomes next_dev
*/
dest_dev = next_dev;
dest_dev_name = dest_dev->name;
dest_dev_type = dest_dev->type;
}
DEBUG_WARN("Too many interfaces: %d\n", current_interface_index);
DEBUG_ASSERT(current_interface_index == 0, "Bad logic handling current_interface_index: %d\n", current_interface_index);
dev_put(src_dev);
dev_put(dest_dev);
/*
* Release the interfaces heirarchy we constructed to this point.
*/
ecm_db_connection_interfaces_deref(interfaces, current_interface_index);
return ECM_DB_IFACE_HEIRARCHY_MAX;
}
EXPORT_SYMBOL(ecm_interface_heirarchy_construct);
/*
* ecm_interface_list_stats_update()
* Given an interface list, walk the interfaces and update the stats for certain types.
*/
static void ecm_interface_list_stats_update(int iface_list_first, struct ecm_db_iface_instance *iface_list[], uint8_t *mac_addr,
uint32_t tx_packets, uint32_t tx_bytes, uint32_t rx_packets, uint32_t rx_bytes)
{
int list_index;
for (list_index = iface_list_first; (list_index < ECM_DB_IFACE_HEIRARCHY_MAX); list_index++) {
struct ecm_db_iface_instance *ii;
ecm_db_iface_type_t ii_type;
char *ii_name;
struct net_device *dev;
ii = iface_list[list_index];
ii_type = ecm_db_connection_iface_type_get(ii);
ii_name = ecm_db_interface_type_to_string(ii_type);
DEBUG_TRACE("list_index: %d, ii: %p, type: %d (%s)\n", list_index, ii, ii_type, ii_name);
/*
* Locate real device in system
*/
dev = dev_get_by_index(&init_net, ecm_db_iface_interface_identifier_get(ii));
if (!dev) {
DEBUG_WARN("Could not locate interface\n");
continue;
}
DEBUG_TRACE("found dev: %p (%s)\n", dev, dev->name);
/*
* Refresh the bridge forward table entry if the port is a bridge port
* Note: A bridge port can be of different interface type, e.g VLAN, ethernet.
* This check, therefore, should be performed for all interface types.
*/
if (is_valid_ether_addr(mac_addr) && ecm_front_end_is_bridge_port(dev) && rx_packets) {
DEBUG_TRACE("Update bridge fdb entry for mac: %pM\n", mac_addr);
br_refresh_fdb_entry(dev, mac_addr);
}
switch (ii_type) {
struct rtnl_link_stats64 stats;
#ifdef ECM_INTERFACE_VLAN_ENABLE
case ECM_DB_IFACE_TYPE_VLAN:
DEBUG_INFO("VLAN\n");
stats.rx_packets = rx_packets;
stats.rx_bytes = rx_bytes;
stats.tx_packets = tx_packets;
stats.tx_bytes = tx_bytes;
__vlan_dev_update_accel_stats(dev, &stats);
break;
#endif
case ECM_DB_IFACE_TYPE_BRIDGE:
DEBUG_INFO("BRIDGE\n");
stats.rx_packets = rx_packets;
stats.rx_bytes = rx_bytes;
stats.tx_packets = tx_packets;
stats.tx_bytes = tx_bytes;
br_dev_update_stats(dev, &stats);
break;
#ifdef ECM_INTERFACE_PPP_ENABLE
case ECM_DB_IFACE_TYPE_PPPOE:
DEBUG_INFO("PPPOE\n");
ppp_update_stats(dev, rx_packets, rx_bytes, tx_packets, tx_bytes);
break;
#endif
default:
/*
* TODO: Extend it accordingly
*/
break;
}
dev_put(dev);
}
}
/*
* ecm_interface_stats_update()
* Using the interface lists for the given connection, update the interface statistics for each.
*
* 'from' here is wrt the connection 'from' side. Likewise with 'to'.
* TX is wrt what the interface has transmitted. RX is what the interface has received.
*/
void ecm_interface_stats_update(struct ecm_db_connection_instance *ci,
uint32_t from_tx_packets, uint32_t from_tx_bytes, uint32_t from_rx_packets, uint32_t from_rx_bytes,
uint32_t to_tx_packets, uint32_t to_tx_bytes, uint32_t to_rx_packets, uint32_t to_rx_bytes)
{
struct ecm_db_iface_instance *from_ifaces[ECM_DB_IFACE_HEIRARCHY_MAX];
struct ecm_db_iface_instance *to_ifaces[ECM_DB_IFACE_HEIRARCHY_MAX];
int from_ifaces_first;
int to_ifaces_first;
uint8_t mac_addr[ETH_ALEN];
/*
* Iterate the 'from' side interfaces and update statistics and state for the real HLOS interfaces
* from_tx_packets / bytes: the amount transmitted by the 'from' interface
* from_rx_packets / bytes: the amount received by the 'from' interface
*/
DEBUG_INFO("%p: Update from interface stats\n", ci);
from_ifaces_first = ecm_db_connection_from_interfaces_get_and_ref(ci, from_ifaces);
ecm_db_connection_from_node_address_get(ci, mac_addr);
ecm_interface_list_stats_update(from_ifaces_first, from_ifaces, mac_addr, from_tx_packets, from_tx_bytes, from_rx_packets, from_rx_bytes);
ecm_db_connection_interfaces_deref(from_ifaces, from_ifaces_first);
/*
* Iterate the 'to' side interfaces and update statistics and state for the real HLOS interfaces
* to_tx_packets / bytes: the amount transmitted by the 'to' interface
* to_rx_packets / bytes: the amount received by the 'to' interface
*/
DEBUG_INFO("%p: Update to interface stats\n", ci);
to_ifaces_first = ecm_db_connection_to_interfaces_get_and_ref(ci, to_ifaces);
ecm_db_connection_to_node_address_get(ci, mac_addr);
ecm_interface_list_stats_update(to_ifaces_first, to_ifaces, mac_addr, to_tx_packets, to_tx_bytes, to_rx_packets, to_rx_bytes);
ecm_db_connection_interfaces_deref(to_ifaces, to_ifaces_first);
}
EXPORT_SYMBOL(ecm_interface_stats_update);
/*
* ecm_interface_regenerate_connection()
* Re-generate a specific connection
*/
void ecm_interface_regenerate_connection(struct ecm_db_connection_instance *ci)
{
struct ecm_front_end_connection_instance *feci;
DEBUG_TRACE("Regenerate connection: %p\n", ci);
/*
* Flag the connection as needing re-generation.
* Re-generation occurs when we next see traffic OR an acceleration engine sync for this connection.
* Refer to front end protocol specific process() functions.
*/
ecm_db_connection_classifier_generation_change(ci);
/*
* If the connection is accelerated then force deceleration.
* Under normal circumstances deceleration would occur on the next sync received,
* however, there is a situation where a sync may not occur if, say, a cable has been pulled.
* The acceleration engine would see no further traffic to trigger sending a sync and so
* re-generation would not occur.
* The connection would stall and no-regeneration would happen leaving the connection in bad state.
* NOTE: We can just call decelerate() upon the front end - if its not accelerated this will have no effect.
*/
feci = ecm_db_connection_front_end_get_and_ref(ci);
feci->decelerate(feci);
feci->deref(feci);
}
/*
* ecm_interface_regenerate_connections()
* Cause regeneration of all connections that are using the specified interface.
*/
static void ecm_interface_regenerate_connections(struct ecm_db_iface_instance *ii)
{
#ifdef ECM_DB_XREF_ENABLE
struct ecm_db_connection_instance *ci;
#endif
DEBUG_TRACE("Regenerate connections using interface: %p\n", ii);
#ifndef ECM_DB_XREF_ENABLE
/*
* An interface has changed, re-generate the connections to ensure all state is updated.
*/
ecm_db_classifier_generation_change();
#else
/*
* Iterate the connections of this interface and cause each one to be re-generated.
* GGG TODO NOTE: If this proves slow (need metrics here) we could just regenerate the "lot" with one very simple call.
* But this would cause re-gen of every connection which may not be appropriate, this here at least keeps things in scope of the interface
* but at the cost of performance.
*/
DEBUG_TRACE("%p: Regenerate 'from' connections\n", ii);
ci = ecm_db_iface_connections_from_get_and_ref_first(ii);
while (ci) {
struct ecm_db_connection_instance *cin;
cin = ecm_db_connection_iface_from_get_and_ref_next(ci);
DEBUG_TRACE("%p: Regenerate: %p", ii, ci);
ecm_interface_regenerate_connection(ci);
ecm_db_connection_deref(ci);
ci = cin;
}
DEBUG_TRACE("%p: Regenerate 'to' connections\n", ii);
ci = ecm_db_iface_connections_to_get_and_ref_first(ii);
while (ci) {
struct ecm_db_connection_instance *cin;
cin = ecm_db_connection_iface_to_get_and_ref_next(ci);
DEBUG_TRACE("%p: Regenerate: %p", ii, ci);
ecm_interface_regenerate_connection(ci);
ecm_db_connection_deref(ci);
ci = cin;
}
DEBUG_TRACE("%p: Regenerate 'from_nat' connections\n", ii);
ci = ecm_db_iface_connections_nat_from_get_and_ref_first(ii);
while (ci) {
struct ecm_db_connection_instance *cin;
cin = ecm_db_connection_iface_nat_from_get_and_ref_next(ci);
DEBUG_TRACE("%p: Regenerate: %p", ii, ci);
ecm_interface_regenerate_connection(ci);
ecm_db_connection_deref(ci);
ci = cin;
}
DEBUG_TRACE("%p: Regenerate 'to_nat' connections\n", ii);
ci = ecm_db_iface_connections_nat_to_get_and_ref_first(ii);
while (ci) {
struct ecm_db_connection_instance *cin;
cin = ecm_db_connection_iface_nat_to_get_and_ref_next(ci);
DEBUG_TRACE("%p: Regenerate: %p", ii, ci);
ecm_interface_regenerate_connection(ci);
ecm_db_connection_deref(ci);
ci = cin;
}
#endif
DEBUG_TRACE("%p: Regenerate COMPLETE\n", ii);
}
/*
* ecm_interface_dev_regenerate_connections()
* Cause regeneration of all connections that are using the specified interface.
*/
void ecm_interface_dev_regenerate_connections(struct net_device *dev)
{
struct ecm_db_iface_instance *ii;
DEBUG_INFO("Regenerate connections for: %p (%s)\n", dev, dev->name);
/*
* Establish the interface for the given device.
* NOTE: The cute thing here is even if dev is previously unknown to us this will create an interface instance
* but it will have no connections to regen and will be destroyed at the end of the function when we deref - so no harm done.
* However if the interface is known to us then we will get it returned by this function and process it accordingly.
*/
ii = ecm_interface_establish_and_ref(dev);
if (!ii) {
DEBUG_WARN("%p: No interface instance could be established for this dev\n", dev);
return;
}
ecm_interface_regenerate_connections(ii);
DEBUG_TRACE("%p: Regenerate for %p: COMPLETE\n", dev, ii);
ecm_db_iface_deref(ii);
}
/*
* ecm_interface_mtu_change()
* MTU of interface has changed
*/
static void ecm_interface_mtu_change(struct net_device *dev)
{
int mtu;
struct ecm_db_iface_instance *ii;
mtu = dev->mtu;
DEBUG_INFO("%p (%s): MTU Change to: %d\n", dev, dev->name, mtu);
/*
* Establish the interface for the given device.
*/
ii = ecm_interface_establish_and_ref(dev);
if (!ii) {
DEBUG_WARN("%p: No interface instance could be established for this dev\n", dev);
return;
}
/*
* Change the mtu
*/
ecm_db_iface_mtu_reset(ii, mtu);
DEBUG_TRACE("%p (%s): MTU Changed to: %d\n", dev, dev->name, mtu);
ecm_interface_regenerate_connections(ii);
DEBUG_TRACE("%p: Regenerate for %p: COMPLETE\n", dev, ii);
ecm_db_iface_deref(ii);
}
/*
* ecm_interface_netdev_notifier_callback()
* Netdevice notifier callback to inform us of change of state of a netdevice
*/
static int ecm_interface_netdev_notifier_callback(struct notifier_block *this, unsigned long event, void *ptr)
{
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(3, 10, 0))
struct net_device *dev __attribute__ ((unused)) = (struct net_device *)ptr;
#else
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
#endif
DEBUG_INFO("Net device notifier for: %p, name: %s, event: %lx\n", dev, dev->name, event);
switch (event) {
case NETDEV_DOWN:
DEBUG_INFO("Net device: %p, DOWN\n", dev);
ecm_interface_dev_regenerate_connections(dev);
break;
case NETDEV_CHANGE:
DEBUG_INFO("Net device: %p, CHANGE\n", dev);
if (!netif_carrier_ok(dev)) {
DEBUG_INFO("Net device: %p, CARRIER BAD\n", dev);
if (netif_is_bond_slave(dev)) {
struct net_device *master;
master = ecm_interface_get_and_hold_dev_master(dev);
DEBUG_ASSERT(master, "Expected a master\n");
ecm_interface_dev_regenerate_connections(master);
dev_put(master);
} else {
ecm_interface_dev_regenerate_connections(dev);
}
}
break;
case NETDEV_CHANGEMTU:
DEBUG_INFO("Net device: %p, MTU CHANGE\n", dev);
ecm_interface_mtu_change(dev);
break;
default:
DEBUG_TRACE("Net device: %p, UNHANDLED: %lx\n", dev, event);
break;
}
return NOTIFY_DONE;
}
/*
* struct notifier_block ecm_interface_netdev_notifier
* Registration for net device changes of state.
*/
static struct notifier_block ecm_interface_netdev_notifier __read_mostly = {
.notifier_call = ecm_interface_netdev_notifier_callback,
};
/*
* ecm_interfae_node_br_fdb_notify_event()
* This is a call back for "bridge fdb update event/ageing timer expire
* event".
*/
static int ecm_interface_node_br_fdb_notify_event(struct notifier_block *nb,
unsigned long val,
void *data)
{
uint8_t *mac = (uint8_t *)data;
struct ecm_db_node_instance *node = NULL;
if(unlikely(!mac)) {
DEBUG_WARN("mac address passed to ecm_interface_node_br_fdb_notify_event is null \n");
return NOTIFY_DONE;
}
/*
* find node instance corresponding to mac address
*/
node = ecm_db_node_find_and_ref(mac);
if(unlikely(!node)) {
DEBUG_WARN("node address is null \n");
return NOTIFY_DONE;
}
ecm_db_traverse_node_from_connection_list_and_decelerate(node);
ecm_db_traverse_node_to_connection_list_and_decelerate(node);
ecm_db_traverse_node_from_nat_connection_list_and_decelerate(node);
ecm_db_traverse_node_to_nat_connection_list_and_decelerate(node);
ecm_db_node_deref(node);
return NOTIFY_DONE;
}
static struct notifier_block ecm_interface_node_br_fdb_update_nb = {
.notifier_call = ecm_interface_node_br_fdb_notify_event,
};
/*
* ecm_interface_init()
*/
int ecm_interface_init(void)
{
int result;
DEBUG_INFO("ECM Interface init\n");
result = register_netdevice_notifier(&ecm_interface_netdev_notifier);
if (result != 0) {
DEBUG_ERROR("Failed to register netdevice notifier %d\n", result);
return result;
}
/*
* register for bridge fdb database modificationevents
*/
br_fdb_update_register_notify(&ecm_interface_node_br_fdb_update_nb);
return 0;
}
EXPORT_SYMBOL(ecm_interface_init);
/*
* ecm_interface_exit()
*/
void ecm_interface_exit(void)
{
DEBUG_INFO("ECM Interface exit\n");
spin_lock_bh(&ecm_interface_lock);
ecm_interface_terminate_pending = true;
spin_unlock_bh(&ecm_interface_lock);
unregister_netdevice_notifier(&ecm_interface_netdev_notifier);
/*
* unregister for bridge fdb update events
*/
br_fdb_update_unregister_notify(&ecm_interface_node_br_fdb_update_nb);
}
EXPORT_SYMBOL(ecm_interface_exit);