qcacmn: Add changes for coexistence of WIN/ MCL TLV implementation
Add changes to allow coexistence of WIN/ MCL TLV implementation
through use of CONFIG_MCL flag and change of MACRO names.
Change-Id: I6868c288a43fd3afb19c84b8a9d4ef0dfbee5c94
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
diff --git a/wmi_unified_param.h b/wmi_unified_param.h
index adfb910..39111a4 100644
--- a/wmi_unified_param.h
+++ b/wmi_unified_param.h
@@ -32,7 +32,6 @@
#ifndef _WMI_UNIFIED_PARAM_H_
#define _WMI_UNIFIED_PARAM_H_
-#include "wmi_unified.h"
#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */
#define WMI_MAC_MAX_SSID_LENGTH 32
#define WMI_SCAN_MAX_NUM_SSID 0x0A
@@ -281,15 +280,15 @@
#define MAX_NUM_CHAN 128
/* WME stream classes */
-#define WMI_AC_BE 0 /* best effort */
-#define WMI_AC_BK 1 /* background */
-#define WMI_AC_VI 2 /* video */
-#define WMI_AC_VO 3 /* voice */
+#define WMI_HOST_AC_BE 0 /* best effort */
+#define WMI_HOST_AC_BK 1 /* background */
+#define WMI_HOST_AC_VI 2 /* video */
+#define WMI_HOST_AC_VO 3 /* voice */
#define WMI_TID_TO_AC(_tid) (\
- (((_tid) == 0) || ((_tid) == 3)) ? WMI_AC_BE : \
- (((_tid) == 1) || ((_tid) == 2)) ? WMI_AC_BK : \
- (((_tid) == 4) || ((_tid) == 5)) ? WMI_AC_VI : \
- WMI_AC_VO)
+ (((_tid) == 0) || ((_tid) == 3)) ? WMI_HOST_AC_BE : \
+ (((_tid) == 1) || ((_tid) == 2)) ? WMI_HOST_AC_BK : \
+ (((_tid) == 4) || ((_tid) == 5)) ? WMI_HOST_AC_VI : \
+ WMI_HOST_AC_VO)
/**
* struct vdev_create_params - vdev create cmd parameter
@@ -805,6 +804,16 @@
} target_rate_set;
/**
+ * struct wmi_host_mac_addr - host mac addr 2 word representation of MAC addr
+ * @mac_addr31to0: upper 4 bytes of MAC address
+ * @mac_addr47to32: lower 2 bytes of MAC address
+ */
+typedef struct {
+ uint32_t mac_addr31to0;
+ uint32_t mac_addr47to32;
+} wmi_host_mac_addr;
+
+/**
* struct peer_assoc_params - peer assoc cmd parameter
* @peer_macaddr: peer mac address
* @vdev_id: vdev id
@@ -852,7 +861,7 @@
* @peer_mac: Peer mac address
*/
struct peer_assoc_params {
- wmi_mac_addr peer_macaddr;
+ wmi_host_mac_addr peer_macaddr;
uint32_t vdev_id;
uint32_t peer_new_assoc;
uint32_t peer_associd;
@@ -867,13 +876,8 @@
uint32_t peer_vht_caps;
uint32_t peer_phymode;
uint32_t peer_ht_info[2];
-#ifndef WMI_NON_TLV_SUPPORT
- wmi_rate_set peer_legacy_rates;
- wmi_rate_set peer_ht_rates;
-#else
target_rate_set peer_legacy_rates;
target_rate_set peer_ht_rates;
-#endif
uint32_t rx_max_rate;
uint32_t rx_mcs_set;
uint32_t tx_max_rate;
@@ -1052,9 +1056,27 @@
* @chan_info: pointer to wmi channel info
*/
#ifdef CONFIG_MCL
+/* TODO: This needs clean-up based on how its processed. */
+typedef struct {
+ /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_channel */
+ uint32_t tlv_header;
+ /** primary 20 MHz channel frequency in mhz */
+ uint32_t mhz;
+ /** Center frequency 1 in MHz*/
+ uint32_t band_center_freq1;
+ /** Center frequency 2 in MHz - valid only for 11acvht 80plus80 mode*/
+ uint32_t band_center_freq2;
+ /** channel info described below */
+ uint32_t info;
+ /** contains min power, max power, reg power and reg class id. */
+ uint32_t reg_info_1;
+ /** contains antennamax */
+ uint32_t reg_info_2;
+} wmi_channel_param;
+
struct scan_chan_list_params {
uint8_t num_scan_chans;
- wmi_channel *chan_info;
+ wmi_channel_param *chan_info;
};
#else
/**
@@ -1362,8 +1384,8 @@
* @delta_min: rate min delta
*/
struct report_rate_delta {
- A_UINT32 percent; /* in unit of 12.5% */
- A_UINT32 delta_min; /* in unit of Mbps */
+ uint32_t percent; /* in unit of 12.5% */
+ uint32_t delta_min; /* in unit of Mbps */
};
/**
@@ -1379,14 +1401,14 @@
* Any of these two conditions or both of
* them can be set.
*/
- A_UINT32 cond_flags;
+ uint32_t cond_flags;
struct report_rate_delta delta;
/*
* In unit of Mbps. There are at most 4 thresholds
* If the threshold count is less than 4, set zero to
* the one following the last threshold
*/
- A_UINT32 report_rate_threshold[WMI_MAX_NUM_OF_RATE_THRESH];
+ uint32_t report_rate_threshold[WMI_MAX_NUM_OF_RATE_THRESH];
};
/**
@@ -1397,9 +1419,9 @@
* @report_per_phy: report per phy type
*/
struct wmi_peer_rate_report_params {
- A_UINT32 rate_report_enable;
- A_UINT32 backoff_time; /* in unit of msecond */
- A_UINT32 timer_period; /* in unit of msecond */
+ uint32_t rate_report_enable;
+ uint32_t backoff_time; /* in unit of msecond */
+ uint32_t timer_period; /* in unit of msecond */
/*
*In the following field, the array index means the phy type,
* please see enum wmi_peer_rate_report_cond_phy_type for detail
@@ -1615,6 +1637,33 @@
uint16_t mobility_domain;
};
+#define WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET (16)
+
+/* This TLV will be filled only in case roam offload
+ * for wpa2-psk/okc/ese/11r is enabled */
+typedef struct {
+ /*
+ * TLV tag and len; tag equals
+ * WMITLV_TAG_STRUC_wmi_roam_offload_fixed_param
+ */
+ uint32_t tlv_header;
+ uint32_t rssi_cat_gap; /* gap for every category bucket */
+ uint32_t prefer_5g; /* prefer select 5G candidate */
+ uint32_t select_5g_margin;
+ uint32_t reassoc_failure_timeout; /* reassoc failure timeout */
+ uint32_t capability;
+ uint32_t ht_caps_info;
+ uint32_t ampdu_param;
+ uint32_t ht_ext_cap;
+ uint32_t ht_txbf;
+ uint32_t asel_cap;
+ uint32_t qos_enabled;
+ uint32_t qos_caps;
+ uint32_t wmm_caps;
+ /* since this is 4 byte aligned, we don't declare it as tlv array */
+ uint32_t mcsset[WMI_HOST_ROAM_OFFLOAD_NUM_MCS_SET >> 2];
+} roam_offload_param;
+
/* struct roam_offload_scan_params - structure
* containing roaming offload scan parameters
* @is_roam_req_valid: flag to tell whether roam req
@@ -1663,7 +1712,7 @@
/* THis is not available in non tlv target.
* please remove this and replace with a host based
* structure */
- wmi_roam_offload_tlv_param roam_offload_params;
+ roam_offload_param roam_offload_params;
#endif
};
@@ -4133,16 +4182,6 @@
} wmi_host_stats_event;
/**
- * struct wmi_host_mac_addr - host mac addr 2 word representation of MAC addr
- * @mac_addr31to0: upper 4 bytes of MAC address
- * @mac_addr47to32: lower 2 bytes of MAC address
- */
-typedef struct {
- uint32_t mac_addr31to0;
- uint32_t mac_addr47to32;
-} wmi_host_mac_addr;
-
-/**
* struct wmi_host_peer_extd_stats - peer extd stats event structure
* @peer_macaddr: Peer mac address
* @inactive_time: inactive time in secs
@@ -4907,6 +4946,7 @@
wmi_vdev_param_rtscts_rate,
wmi_vdev_param_mcc_rtscts_protection_enable,
wmi_vdev_param_mcc_broadcast_probe_enable,
+ wmi_vdev_param_capabilities,
wmi_vdev_param_max,
} wmi_conv_vdev_param_id;