| /* |
| * Copyright (c) 2016 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| #include "athdefs.h" |
| #include "osapi_linux.h" |
| #include "a_types.h" |
| #include "a_debug.h" |
| #include "ol_if_athvar.h" |
| #include "ol_defines.h" |
| #include "wmi.h" |
| #include "wmi_unified_priv.h" |
| #include "wmi_unified_param.h" |
| |
| /** |
| * wmi_unified_vdev_create_send() - send VDEV create command to fw |
| * @wmi_handle: wmi handle |
| * @param: pointer to hold vdev create parameter |
| * @macaddr: vdev mac address |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_create_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct vdev_create_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_create_cmd) |
| return wmi_handle->ops->send_vdev_create_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_delete_send() - send VDEV delete command to fw |
| * @wmi_handle: wmi handle |
| * @if_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_delete_send(void *wmi_hdl, |
| uint8_t if_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_delete_cmd) |
| return wmi_handle->ops->send_vdev_delete_cmd(wmi_handle, |
| if_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_stop_send() - send vdev stop command to fw |
| * @wmi: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_stop_send(void *wmi_hdl, |
| uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_stop_cmd) |
| return wmi_handle->ops->send_vdev_stop_cmd(wmi_handle, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_down_send() - send vdev down command to fw |
| * @wmi: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_down_send(void *wmi_hdl, uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_down_cmd) |
| return wmi_handle->ops->send_vdev_down_cmd(wmi_handle, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_start_send() - send vdev start command to fw |
| * @wmi: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_start_send(void *wmi_hdl, |
| struct vdev_start_params *req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_start_cmd) |
| return wmi_handle->ops->send_vdev_start_cmd(wmi_handle, req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_hidden_ssid_vdev_restart_send() - restart vdev to set hidden ssid |
| * @wmi: wmi handle |
| * @restart_params: vdev restart params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_hidden_ssid_vdev_restart_send(void *wmi_hdl, |
| struct hidden_ssid_vdev_restart_params *restart_params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_hidden_ssid_vdev_restart_cmd) |
| return wmi_handle->ops->send_hidden_ssid_vdev_restart_cmd( |
| wmi_handle, restart_params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_peer_flush_tids_send() - flush peer tids packets in fw |
| * @wmi: wmi handle |
| * @peer_addr: peer mac address |
| * @param: pointer to hold peer flush tid parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_peer_flush_tids_send(void *wmi_hdl, |
| uint8_t peer_addr[IEEE80211_ADDR_LEN], |
| struct peer_flush_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_peer_flush_tids_cmd) |
| return wmi_handle->ops->send_peer_flush_tids_cmd(wmi_handle, |
| peer_addr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_peer_delete_send() - send PEER delete command to fw |
| * @wmi: wmi handle |
| * @peer_addr: peer mac addr |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_peer_delete_send(void *wmi_hdl, |
| uint8_t |
| peer_addr[IEEE80211_ADDR_LEN], |
| uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_peer_delete_cmd) |
| return wmi_handle->ops->send_peer_delete_cmd(wmi_handle, |
| peer_addr, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_set_peer_param() - set peer parameter in fw |
| * @wmi_ctx: wmi handle |
| * @peer_addr: peer mac address |
| * @param : pointer to hold peer set parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_set_peer_param_send(void *wmi_hdl, |
| uint8_t peer_addr[IEEE80211_ADDR_LEN], |
| struct peer_set_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_peer_param_cmd) |
| return wmi_handle->ops->send_peer_param_cmd(wmi_handle, |
| peer_addr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_up_send() - send vdev up command in fw |
| * @wmi: wmi handle |
| * @bssid: bssid |
| * @vdev_up_params: pointer to hold vdev up parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_up_send(void *wmi_hdl, |
| uint8_t bssid[IEEE80211_ADDR_LEN], |
| struct vdev_up_params *params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_up_cmd) |
| return wmi_handle->ops->send_vdev_up_cmd(wmi_handle, bssid, |
| params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_peer_create_send() - send peer create command to fw |
| * @wmi: wmi handle |
| * @peer_addr: peer mac address |
| * @peer_type: peer type |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_peer_create_send(void *wmi_hdl, |
| struct peer_create_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_peer_create_cmd) |
| return wmi_handle->ops->send_peer_create_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #ifdef FEATURE_GREEN_AP |
| /** |
| * wmi_unified_green_ap_ps_send() - enable green ap powersave command |
| * @wmi_handle: wmi handle |
| * @value: value |
| * @mac_id: mac id to have radio context |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_green_ap_ps_send(void *wmi_hdl, |
| uint32_t value, uint8_t mac_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_green_ap_ps_cmd) |
| return wmi_handle->ops->send_green_ap_ps_cmd(wmi_handle, value, |
| mac_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #else |
| QDF_STATUS wmi_unified_green_ap_ps_send(void *wmi_hdl, |
| uint32_t value, uint8_t mac_id) |
| { |
| return 0; |
| } |
| #endif /* FEATURE_GREEN_AP */ |
| |
| /** |
| * wmi_unified_pdev_utf_cmd() - send utf command to fw |
| * @wmi_handle: wmi handle |
| * @param: pointer to pdev_utf_params |
| * @mac_id: mac id to have radio context |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS |
| wmi_unified_pdev_utf_cmd_send(void *wmi_hdl, |
| struct pdev_utf_params *param, |
| uint8_t mac_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_utf_cmd) |
| return wmi_handle->ops->send_pdev_utf_cmd(wmi_handle, param, |
| mac_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_param_send() - set pdev parameters |
| * @wmi_handle: wmi handle |
| * @param: pointer to pdev parameter |
| * @mac_id: radio context |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures, |
| * errno on failure |
| */ |
| QDF_STATUS |
| wmi_unified_pdev_param_send(void *wmi_hdl, |
| struct pdev_params *param, |
| uint8_t mac_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_param_cmd) |
| return wmi_handle->ops->send_pdev_param_cmd(wmi_handle, param, |
| mac_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_suspend_send() - WMI suspend function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold suspend parameter |
| * @mac_id: radio context |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_suspend_send(void *wmi_hdl, |
| struct suspend_params *param, |
| uint8_t mac_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_suspend_cmd) |
| return wmi_handle->ops->send_suspend_cmd(wmi_handle, param, |
| mac_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_resume_send - WMI resume function |
| * @param wmi_handle : handle to WMI. |
| * @mac_id: radio context |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_resume_send(void *wmi_hdl, |
| uint8_t mac_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_resume_cmd) |
| return wmi_handle->ops->send_resume_cmd(wmi_handle, |
| mac_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wow_enable_send() - WMI wow enable function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold wow enable parameter |
| * @mac_id: radio context |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_enable_send(void *wmi_hdl, |
| struct wow_cmd_params *param, |
| uint8_t mac_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_wow_enable_cmd) |
| return wmi_handle->ops->send_wow_enable_cmd(wmi_handle, param, |
| mac_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wow_wakeup_send() - WMI wow wakeup function |
| * @param wmi_hdl : handle to WMI. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_wakeup_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_wow_wakeup_cmd) |
| return wmi_handle->ops->send_wow_wakeup_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wow_add_wakeup_event_send() - WMI wow wakeup function |
| * @param wmi_handle : handle to WMI. |
| * @param: pointer to wow wakeup event parameter structure |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_add_wakeup_event_send(void *wmi_hdl, |
| struct wow_add_wakeup_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_wow_add_wakeup_event_cmd) |
| return wmi->ops->send_wow_add_wakeup_event_cmd(wmi, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wow_add_wakeup_pattern_send() - WMI wow wakeup pattern function |
| * @param wmi_handle : handle to WMI. |
| * @param: pointer to wow wakeup pattern parameter structure |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_add_wakeup_pattern_send(void *wmi_hdl, |
| struct wow_add_wakeup_pattern_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_wow_add_wakeup_pattern_cmd) |
| return wmi->ops->send_wow_add_wakeup_pattern_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wow_remove_wakeup_pattern_send() - WMI wow wakeup pattern function |
| * @param wmi_handle : handle to WMI. |
| * @param: pointer to wow wakeup pattern parameter structure |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_remove_wakeup_pattern_send(void *wmi_hdl, |
| struct wow_remove_wakeup_pattern_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_wow_remove_wakeup_pattern_cmd) |
| return wmi->ops->send_wow_remove_wakeup_pattern_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_ap_ps_cmd_send() - set ap powersave parameters |
| * @wma_ctx: wma context |
| * @peer_addr: peer mac address |
| * @param: pointer to ap_ps parameter structure |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_ap_ps_cmd_send(void *wmi_hdl, |
| uint8_t *peer_addr, |
| struct ap_ps_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ap_ps_param_cmd) |
| return wmi_handle->ops->send_set_ap_ps_param_cmd(wmi_handle, |
| peer_addr, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_sta_ps_cmd_send() - set sta powersave parameters |
| * @wma_ctx: wma context |
| * @peer_addr: peer mac address |
| * @param: pointer to sta_ps parameter structure |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_sta_ps_cmd_send(void *wmi_hdl, |
| struct sta_ps_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_sta_ps_param_cmd) |
| return wmi_handle->ops->send_set_sta_ps_param_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_crash_inject() - inject fw crash |
| * @wma_handle: wma handle |
| * @param: ponirt to crash inject paramter structure |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_crash_inject(void *wmi_hdl, |
| struct crash_inject *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_crash_inject_cmd) |
| return wmi_handle->ops->send_crash_inject_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_dbglog_cmd_send() - set debug log level |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold dbglog level parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS |
| wmi_unified_dbglog_cmd_send(void *wmi_hdl, |
| struct dbglog_params *dbglog_param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_dbglog_cmd) |
| return wmi_handle->ops->send_dbglog_cmd(wmi_handle, |
| dbglog_param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_set_param_send() - WMI vdev set parameter function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold vdev set parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_set_param_send(void *wmi_hdl, |
| struct vdev_set_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_set_param_cmd) |
| return wmi_handle->ops->send_vdev_set_param_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_stats_request_send() - WMI request stats function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold stats request parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_stats_request_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct stats_request_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_stats_request_cmd) |
| return wmi_handle->ops->send_stats_request_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #ifndef WMI_NON_TLV_SUPPORT |
| /** |
| * wmi_unified_packet_log_enable_send() - WMI request stats function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold stats request parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_packet_log_enable_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct packet_enable_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_packet_log_enable_cmd) |
| return wmi_handle->ops->send_packet_log_enable_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #else |
| /** |
| * wmi_unified_packet_log_enable_send() - WMI request stats function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold stats request parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_packet_log_enable_send(void *wmi_hdl, |
| WMI_HOST_PKTLOG_EVENT PKTLOG_EVENT) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_packet_log_enable_cmd) |
| return wmi_handle->ops->send_packet_log_enable_cmd(wmi_handle, |
| PKTLOG_EVENT); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #endif |
| /** |
| * wmi_unified_packet_log_disable__send() - WMI pktlog disable function |
| * @param wmi_handle : handle to WMI. |
| * @param PKTLOG_EVENT : packet log event |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_packet_log_disable_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_packet_log_disable_cmd) |
| return wmi_handle->ops->send_packet_log_disable_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_beacon_send_cmd() - WMI beacon send function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold beacon send cmd parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_beacon_send_cmd(void *wmi_hdl, |
| struct beacon_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_beacon_send_cmd) |
| return wmi_handle->ops->send_beacon_send_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_beacon_tmpl_send_cmd() - WMI beacon send function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold beacon send cmd parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_beacon_tmpl_send_cmd(void *wmi_hdl, |
| struct beacon_tmpl_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_beacon_tmpl_send_cmd) |
| return wmi_handle->ops->send_beacon_tmpl_send_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| /** |
| * wmi_unified_peer_assoc_send() - WMI peer assoc function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to peer assoc parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_peer_assoc_send(void *wmi_hdl, |
| struct peer_assoc_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_peer_assoc_cmd) |
| return wmi_handle->ops->send_peer_assoc_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_scan_start_cmd_send() - WMI scan start function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold scan start cmd parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_scan_start_cmd_send(void *wmi_hdl, |
| struct scan_start_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_scan_start_cmd) |
| return wmi_handle->ops->send_scan_start_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_scan_stop_cmd_send() - WMI scan start function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold scan start cmd parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_scan_stop_cmd_send(void *wmi_hdl, |
| struct scan_stop_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_scan_stop_cmd) |
| return wmi_handle->ops->send_scan_stop_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_scan_chan_list_cmd_send() - WMI scan channel list function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold scan channel list parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_scan_chan_list_cmd_send(void *wmi_hdl, |
| struct scan_chan_list_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_scan_chan_list_cmd) |
| return wmi_handle->ops->send_scan_chan_list_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_mgmt_unified_cmd_send() - management cmd over wmi layer |
| * @wmi_hdl : handle to WMI. |
| * @param : pointer to hold mgmt cmd parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_mgmt_unified_cmd_send(void *wmi_hdl, |
| struct wmi_mgmt_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_mgmt_cmd) |
| return wmi_handle->ops->send_mgmt_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_modem_power_state() - set modem power state to fw |
| * @wmi_hdl: wmi handle |
| * @param_value: parameter value |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_modem_power_state(void *wmi_hdl, |
| uint32_t param_value) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_modem_power_state_cmd) |
| return wmi_handle->ops->send_modem_power_state_cmd(wmi_handle, |
| param_value); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_sta_ps_mode() - set sta powersave params in fw |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * @val: value |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS wmi_unified_set_sta_ps_mode(void *wmi_hdl, |
| uint32_t vdev_id, uint8_t val) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_sta_ps_mode_cmd) |
| return wmi_handle->ops->send_set_sta_ps_mode_cmd(wmi_handle, |
| vdev_id, val); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_set_mimops() - set MIMO powersave |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * @value: value |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS wmi_unified_set_mimops(void *wmi_hdl, uint8_t vdev_id, int value) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_mimops_cmd) |
| return wmi_handle->ops->send_set_mimops_cmd(wmi_handle, |
| vdev_id, value); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_set_smps_params() - set smps params |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * @value: value |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS wmi_unified_set_smps_params(void *wmi_hdl, uint8_t vdev_id, |
| int value) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_smps_params_cmd) |
| return wmi_handle->ops->send_set_smps_params_cmd(wmi_handle, |
| vdev_id, value); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| |
| /** |
| * wmi_set_p2pgo_oppps_req() - send p2p go opp power save request to fw |
| * @wmi_hdl: wmi handle |
| * @opps: p2p opp power save parameters |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_p2pgo_oppps_req(void *wmi_hdl, |
| struct p2p_ps_params *oppps) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_p2pgo_oppps_req_cmd) |
| return wmi_handle->ops->send_set_p2pgo_oppps_req_cmd(wmi_handle, |
| oppps); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_p2pgo_noa_req_cmd() - send p2p go noa request to fw |
| * @wmi_hdl: wmi handle |
| * @noa: p2p power save parameters |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_p2pgo_noa_req_cmd(void *wmi_hdl, |
| struct p2p_ps_params *noa) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_p2pgo_noa_req_cmd) |
| return wmi_handle->ops->send_set_p2pgo_noa_req_cmd(wmi_handle, |
| noa); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_get_temperature() - get pdev temperature req |
| * @wmi_hdl: wmi handle |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS wmi_unified_get_temperature(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_get_temperature_cmd) |
| return wmi_handle->ops->send_get_temperature_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_sta_uapsd_auto_trig_cmd() - set uapsd auto trigger command |
| * @wmi_hdl: wmi handle |
| * @end_set_sta_ps_mode_cmd: cmd paramter strcture |
| * |
| * This function sets the trigger |
| * uapsd params such as service interval, delay interval |
| * and suspend interval which will be used by the firmware |
| * to send trigger frames periodically when there is no |
| * traffic on the transmit side. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS |
| wmi_unified_set_sta_uapsd_auto_trig_cmd(void *wmi_hdl, |
| struct sta_uapsd_trig_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_sta_uapsd_auto_trig_cmd) |
| return wmi_handle->ops->send_set_sta_uapsd_auto_trig_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_ocb_start_timing_advert() - start sending the timing advertisement |
| * frames on a channel |
| * @wmi_handle: pointer to the wmi handle |
| * @timing_advert: pointer to the timing advertisement struct |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_ocb_start_timing_advert(void *wmi_hdl, |
| struct ocb_timing_advert_param *timing_advert) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_ocb_start_timing_advert_cmd) |
| return wmi_handle->ops->send_ocb_start_timing_advert_cmd(wmi_handle, |
| timing_advert); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_ocb_stop_timing_advert() - stop sending the timing advertisement |
| * frames on a channel |
| * @wmi_handle: pointer to the wmi handle |
| * @timing_advert: pointer to the timing advertisement struct |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_ocb_stop_timing_advert(void *wmi_hdl, |
| struct ocb_timing_advert_param *timing_advert) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_ocb_stop_timing_advert_cmd) |
| return wmi_handle->ops->send_ocb_stop_timing_advert_cmd(wmi_handle, |
| timing_advert); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_ocb_set_utc_time_cmd() - get ocb tsf timer val |
| * @wmi_handle: pointer to the wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_ocb_set_utc_time_cmd(void *wmi_hdl, |
| struct ocb_utc_param *utc) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_ocb_set_utc_time_cmd) |
| return wmi_handle->ops->send_ocb_set_utc_time_cmd(wmi_handle, |
| utc); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_ocb_get_tsf_timer() - get ocb tsf timer val |
| * @wmi_handle: pointer to the wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_ocb_get_tsf_timer(void *wmi_hdl, |
| uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_ocb_get_tsf_timer_cmd) |
| return wmi_handle->ops->send_ocb_get_tsf_timer_cmd(wmi_handle, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_dcc_get_stats_cmd() - get the DCC channel stats |
| * @wmi_handle: pointer to the wmi handle |
| * @get_stats_param: pointer to the dcc stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_dcc_get_stats_cmd(void *wmi_hdl, |
| struct dcc_get_stats_param *get_stats_param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_dcc_get_stats_cmd) |
| return wmi_handle->ops->send_dcc_get_stats_cmd(wmi_handle, |
| get_stats_param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_dcc_clear_stats() - command to clear the DCC stats |
| * @wmi_handle: pointer to the wmi handle |
| * @clear_stats_param: parameters to the command |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_dcc_clear_stats(void *wmi_hdl, |
| uint32_t vdev_id, uint32_t dcc_stats_bitmap) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_dcc_clear_stats_cmd) |
| return wmi_handle->ops->send_dcc_clear_stats_cmd(wmi_handle, |
| vdev_id, dcc_stats_bitmap); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_dcc_update_ndl() - command to update the NDL data |
| * @wmi_handle: pointer to the wmi handle |
| * @update_ndl_param: pointer to the request parameters |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures |
| */ |
| QDF_STATUS wmi_unified_dcc_update_ndl(void *wmi_hdl, |
| struct dcc_update_ndl_param *update_ndl_param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_dcc_update_ndl_cmd) |
| return wmi_handle->ops->send_dcc_update_ndl_cmd(wmi_handle, |
| update_ndl_param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_ocb_set_config() - send the OCB config to the FW |
| * @wmi_handle: pointer to the wmi handle |
| * @config: the OCB configuration |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures |
| */ |
| QDF_STATUS wmi_unified_ocb_set_config(void *wmi_hdl, |
| struct ocb_config_param *config, uint32_t *ch_mhz) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_ocb_set_config_cmd) |
| return wmi_handle->ops->send_ocb_set_config_cmd(wmi_handle, |
| config, ch_mhz); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_enable_disable_mcc_adaptive_scheduler_cmd() - control mcc scheduler |
| * @wmi_handle: wmi handle |
| * @mcc_adaptive_scheduler: enable/disable |
| * |
| * This function enable/disable mcc adaptive scheduler in fw. |
| * |
| * Return: QDF_STATUS_SUCCESS for sucess or error code |
| */ |
| QDF_STATUS wmi_unified_set_enable_disable_mcc_adaptive_scheduler_cmd( |
| void *wmi_hdl, uint32_t mcc_adaptive_scheduler, |
| uint32_t pdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_enable_disable_mcc_adaptive_scheduler_cmd) |
| return wmi_handle->ops->send_set_enable_disable_mcc_adaptive_scheduler_cmd(wmi_handle, |
| mcc_adaptive_scheduler, pdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_mcc_channel_time_latency_cmd() - set MCC channel time latency |
| * @wmi: wmi handle |
| * @mcc_channel: mcc channel |
| * @mcc_channel_time_latency: MCC channel time latency. |
| * |
| * Currently used to set time latency for an MCC vdev/adapter using operating |
| * channel of it and channel number. The info is provided run time using |
| * iwpriv command: iwpriv <wlan0 | p2p0> setMccLatency <latency in ms>. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_mcc_channel_time_latency_cmd(void *wmi_hdl, |
| uint32_t mcc_channel_freq, uint32_t mcc_channel_time_latency) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_mcc_channel_time_latency_cmd) |
| return wmi_handle->ops->send_set_mcc_channel_time_latency_cmd(wmi_handle, |
| mcc_channel_freq, |
| mcc_channel_time_latency); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_mcc_channel_time_quota_cmd() - set MCC channel time quota |
| * @wmi: wmi handle |
| * @adapter_1_chan_number: adapter 1 channel number |
| * @adapter_1_quota: adapter 1 quota |
| * @adapter_2_chan_number: adapter 2 channel number |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_mcc_channel_time_quota_cmd(void *wmi_hdl, |
| uint32_t adapter_1_chan_freq, |
| uint32_t adapter_1_quota, uint32_t adapter_2_chan_freq) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_mcc_channel_time_quota_cmd) |
| return wmi_handle->ops->send_set_mcc_channel_time_quota_cmd(wmi_handle, |
| adapter_1_chan_freq, |
| adapter_1_quota, |
| adapter_2_chan_freq); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_thermal_mgmt_cmd() - set thermal mgmt command to fw |
| * @wmi_handle: Pointer to wmi handle |
| * @thermal_info: Thermal command information |
| * |
| * This function sends the thermal management command |
| * to the firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_thermal_mgmt_cmd(void *wmi_hdl, |
| struct thermal_cmd_params *thermal_info) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_thermal_mgmt_cmd) |
| return wmi_handle->ops->send_set_thermal_mgmt_cmd(wmi_handle, |
| thermal_info); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| |
| /** |
| * wmi_unified_lro_config_cmd() - process the LRO config command |
| * @wmi: Pointer to wmi handle |
| * @wmi_lro_cmd: Pointer to LRO configuration parameters |
| * |
| * This function sends down the LRO configuration parameters to |
| * the firmware to enable LRO, sets the TCP flags and sets the |
| * seed values for the toeplitz hash generation |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lro_config_cmd(void *wmi_hdl, |
| struct wmi_lro_config_cmd_t *wmi_lro_cmd) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lro_config_cmd) |
| return wmi_handle->ops->send_lro_config_cmd(wmi_handle, |
| wmi_lro_cmd); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #ifndef WMI_NON_TLV_SUPPORT |
| /** |
| * wmi_unified_bcn_buf_ll_cmd() - prepare and send beacon buffer to fw for LL |
| * @wmi_hdl: wmi handle |
| * @param: bcn ll cmd parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_bcn_buf_ll_cmd(void *wmi_hdl, |
| wmi_bcn_send_from_host_cmd_fixed_param *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_bcn_buf_ll_cmd) |
| return wmi_handle->ops->send_bcn_buf_ll_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| /** |
| * wmi_unified_set_sta_sa_query_param_cmd() - set sta sa query parameters |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * @max_retries: max retries |
| * @retry_interval: retry interval |
| * This function sets sta query related parameters in fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| |
| QDF_STATUS wmi_unified_set_sta_sa_query_param_cmd(void *wmi_hdl, |
| uint8_t vdev_id, uint32_t max_retries, |
| uint32_t retry_interval) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_sta_sa_query_param_cmd) |
| return wmi_handle->ops->send_set_sta_sa_query_param_cmd(wmi_handle, |
| vdev_id, max_retries, |
| retry_interval); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_sta_keep_alive_cmd() - set sta keep alive parameters |
| * @wmi_hdl: wmi handle |
| * @params: sta keep alive parameter |
| * |
| * This function sets keep alive related parameters in fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_sta_keep_alive_cmd(void *wmi_hdl, |
| struct sta_params *params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_sta_keep_alive_cmd) |
| return wmi_handle->ops->send_set_sta_keep_alive_cmd(wmi_handle, |
| params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_set_gtx_cfg_cmd() - set GTX params |
| * @wmi_hdl: wmi handle |
| * @if_id: vdev id |
| * @gtx_info: GTX config params |
| * |
| * This function set GTX related params in firmware. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_set_gtx_cfg_cmd(void *wmi_hdl, uint32_t if_id, |
| struct wmi_gtx_config *gtx_info) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_set_gtx_cfg_cmd) |
| return wmi_handle->ops->send_vdev_set_gtx_cfg_cmd(wmi_handle, |
| if_id, gtx_info); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_update_edca_param() - update EDCA params |
| * @wmi_hdl: wmi handle |
| * @edca_params: edca parameters |
| * |
| * This function updates EDCA parameters to the target |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| #ifndef WMI_NON_TLV_SUPPORT |
| QDF_STATUS wmi_unified_process_update_edca_param(void *wmi_hdl, |
| uint8_t vdev_id, |
| wmi_wmm_vparams gwmm_param[WMI_MAX_NUM_AC]) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_update_edca_param_cmd) |
| return wmi_handle->ops->send_process_update_edca_param_cmd(wmi_handle, |
| vdev_id, gwmm_param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| /** |
| * wmi_unified_probe_rsp_tmpl_send_cmd() - send probe response template to fw |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * @probe_rsp_info: probe response info |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_probe_rsp_tmpl_send_cmd(void *wmi_hdl, |
| uint8_t vdev_id, |
| struct wmi_probe_resp_params *probe_rsp_info, |
| uint8_t *frm) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_probe_rsp_tmpl_send_cmd) |
| return wmi_handle->ops->send_probe_rsp_tmpl_send_cmd(wmi_handle, |
| vdev_id, probe_rsp_info, |
| frm); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_setup_install_key_cmd - send key to install to fw |
| * @wmi_hdl: wmi handle |
| * @key_params: key parameters |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_setup_install_key_cmd(void *wmi_hdl, |
| struct set_key_params *key_params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_setup_install_key_cmd) |
| return wmi_handle->ops->send_setup_install_key_cmd(wmi_handle, |
| key_params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_p2p_go_set_beacon_ie_cmd() - set beacon IE for p2p go |
| * @wma_handle: wma handle |
| * @vdev_id: vdev id |
| * @p2p_ie: p2p IE |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_p2p_go_set_beacon_ie_cmd(void *wmi_hdl, |
| A_UINT32 vdev_id, uint8_t *p2p_ie) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_p2p_go_set_beacon_ie_cmd) |
| return wmi_handle->ops->send_p2p_go_set_beacon_ie_cmd(wmi_handle, |
| vdev_id, p2p_ie); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_gateway_params_cmd() - set gateway parameters |
| * @wmi_hdl: wmi handle |
| * @req: gateway parameter update request structure |
| * |
| * This function reads the incoming @req and fill in the destination |
| * WMI structure and sends down the gateway configs down to the firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures; |
| * error number otherwise |
| */ |
| QDF_STATUS wmi_unified_set_gateway_params_cmd(void *wmi_hdl, |
| struct gateway_update_req_param *req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_gateway_params_cmd) |
| return wmi_handle->ops->send_set_gateway_params_cmd(wmi_handle, |
| req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_rssi_monitoring_cmd() - set rssi monitoring |
| * @wmi_hdl: wmi handle |
| * @req: rssi monitoring request structure |
| * |
| * This function reads the incoming @req and fill in the destination |
| * WMI structure and send down the rssi monitoring configs down to the firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures; |
| * error number otherwise |
| */ |
| QDF_STATUS wmi_unified_set_rssi_monitoring_cmd(void *wmi_hdl, |
| struct rssi_monitor_param *req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_rssi_monitoring_cmd) |
| return wmi_handle->ops->send_set_rssi_monitoring_cmd(wmi_handle, |
| req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_scan_probe_setoui_cmd() - set scan probe OUI |
| * @wmi_hdl: wmi handle |
| * @psetoui: OUI parameters |
| * |
| * set scan probe OUI parameters in firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_scan_probe_setoui_cmd(void *wmi_hdl, |
| struct scan_mac_oui *psetoui) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_scan_probe_setoui_cmd) |
| return wmi_handle->ops->send_scan_probe_setoui_cmd(wmi_handle, |
| psetoui); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_reset_passpoint_network_list_cmd() - reset passpoint network list |
| * @wmi_hdl: wmi handle |
| * @req: passpoint network request structure |
| * |
| * This function sends down WMI command with network id set to wildcard id. |
| * firmware shall clear all the config entries |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_reset_passpoint_network_list_cmd(void *wmi_hdl, |
| struct wifi_passpoint_req_param *req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_reset_passpoint_network_list_cmd) |
| return wmi_handle->ops->send_reset_passpoint_network_list_cmd(wmi_handle, |
| req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_passpoint_network_list_cmd() - set passpoint network list |
| * @wmi_hdl: wmi handle |
| * @req: passpoint network request structure |
| * |
| * This function reads the incoming @req and fill in the destination |
| * WMI structure and send down the passpoint configs down to the firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_passpoint_network_list_cmd(void *wmi_hdl, |
| struct wifi_passpoint_req_param *req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_passpoint_network_list_cmd) |
| return wmi_handle->ops->send_set_passpoint_network_list_cmd(wmi_handle, |
| req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** wmi_unified_set_epno_network_list_cmd() - set epno network list |
| * @wmi_hdl: wmi handle |
| * @req: epno config params request structure |
| * |
| * This function reads the incoming epno config request structure |
| * and constructs the WMI message to the firmware. |
| * |
| * Returns: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures, |
| * error number otherwise |
| */ |
| QDF_STATUS wmi_unified_set_epno_network_list_cmd(void *wmi_hdl, |
| struct wifi_enhanched_pno_params *req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_epno_network_list_cmd) |
| return wmi_handle->ops->send_set_epno_network_list_cmd(wmi_handle, |
| req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #ifndef WMI_NON_TLV_SUPPORT |
| /** |
| * wmi_unified_roam_scan_offload_mode_cmd() - set roam scan parameters |
| * @wmi_hdl: wmi handle |
| * @scan_cmd_fp: scan related parameters |
| * @roam_req: roam related parameters |
| * |
| * This function reads the incoming @roam_req and fill in the destination |
| * WMI structure and send down the roam scan configs down to the firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_scan_offload_mode_cmd(void *wmi_hdl, |
| wmi_start_scan_cmd_fixed_param *scan_cmd_fp, |
| struct roam_offload_scan_params *roam_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_offload_mode_cmd) |
| return wmi_handle->ops->send_roam_scan_offload_mode_cmd( |
| wmi_handle, scan_cmd_fp, roam_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| /** |
| * wmi_unified_roam_scan_offload_rssi_thresh_cmd() - set roam scan rssi |
| * parameters |
| * @wmi_hdl: wmi handle |
| * @roam_req: roam rssi related parameters |
| * |
| * This function reads the incoming @roam_req and fill in the destination |
| * WMI structure and send down the roam scan rssi configs down to the firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_scan_offload_rssi_thresh_cmd(void *wmi_hdl, |
| struct roam_offload_scan_rssi_params |
| *roam_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_offload_rssi_thresh_cmd) |
| return wmi_handle->ops->send_roam_scan_offload_rssi_thresh_cmd( |
| wmi_handle, roam_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_roam_scan_filter_cmd() - send roam scan whitelist, |
| * blacklist and preferred list |
| * @wmi_hdl: wmi handle |
| * @roam_req: roam scan lists related parameters |
| * |
| * This function reads the incoming @roam_req and fill in the destination |
| * WMI structure and send down the different roam scan lists down to the fw |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_scan_filter_cmd(void *wmi_hdl, |
| struct roam_scan_filter_params *roam_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_filter_cmd) |
| return wmi_handle->ops->send_roam_scan_filter_cmd( |
| wmi_handle, roam_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** wmi_unified_ipa_offload_control_cmd() - ipa offload control parameter |
| * @wmi_hdl: wmi handle |
| * @ipa_offload: ipa offload control parameter |
| * |
| * Returns: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures, |
| * error number otherwise |
| */ |
| QDF_STATUS wmi_unified_ipa_offload_control_cmd(void *wmi_hdl, |
| struct ipa_offload_control_params *ipa_offload) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_ipa_offload_control_cmd) |
| return wmi_handle->ops->send_ipa_offload_control_cmd(wmi_handle, |
| ipa_offload); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_extscan_get_capabilities_cmd() - extscan get capabilities |
| * @wmi_hdl: wmi handle |
| * @pgetcapab: get capabilities params |
| * |
| * This function send request to fw to get extscan capabilities. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_extscan_get_capabilities_cmd(void *wmi_hdl, |
| struct extscan_capabilities_params *pgetcapab) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_extscan_get_capabilities_cmd) |
| return wmi_handle->ops->send_extscan_get_capabilities_cmd(wmi_handle, |
| pgetcapab); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_extscan_get_cached_results_cmd() - extscan get cached results |
| * @wmi_hdl: wmi handle |
| * @pcached_results: cached results parameters |
| * |
| * This function send request to fw to get cached results. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_extscan_get_cached_results_cmd(void *wmi_hdl, |
| struct extscan_cached_result_params *pcached_results) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_extscan_get_cached_results_cmd) |
| return wmi_handle->ops->send_extscan_get_cached_results_cmd(wmi_handle, |
| pcached_results); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_extscan_stop_change_monitor_cmd() - send stop change monitor cmd |
| * @wmi_hdl: wmi handle |
| * @reset_req: Reset change request params |
| * |
| * This function sends stop change monitor request to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_extscan_stop_change_monitor_cmd(void *wmi_hdl, |
| struct extscan_capabilities_reset_params *reset_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_extscan_stop_change_monitor_cmd) |
| return wmi_handle->ops->send_extscan_stop_change_monitor_cmd(wmi_handle, |
| reset_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| |
| |
| /** |
| * wmi_unified_extscan_start_change_monitor_cmd() - start change monitor cmd |
| * @wmi_hdl: wmi handle |
| * @psigchange: change monitor request params |
| * |
| * This function sends start change monitor request to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_extscan_start_change_monitor_cmd(void *wmi_hdl, |
| struct extscan_set_sig_changereq_params * |
| psigchange) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_extscan_start_change_monitor_cmd) |
| return wmi_handle->ops->send_extscan_start_change_monitor_cmd(wmi_handle, |
| psigchange); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_extscan_stop_hotlist_monitor_cmd() - stop hotlist monitor |
| * @wmi_hdl: wmi handle |
| * @photlist_reset: hotlist reset params |
| * |
| * This function configures hotlist monitor to stop in fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_extscan_stop_hotlist_monitor_cmd(void *wmi_hdl, |
| struct extscan_bssid_hotlist_reset_params *photlist_reset) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_extscan_stop_hotlist_monitor_cmd) |
| return wmi_handle->ops->send_extscan_stop_hotlist_monitor_cmd(wmi_handle, |
| photlist_reset); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_stop_extscan_cmd() - stop extscan command to fw. |
| * @wmi_hdl: wmi handle |
| * @pstopcmd: stop scan command request params |
| * |
| * This function sends stop extscan request to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS wmi_unified_stop_extscan_cmd(void *wmi_hdl, |
| struct extscan_stop_req_params *pstopcmd) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_stop_extscan_cmd) |
| return wmi_handle->ops->send_stop_extscan_cmd(wmi_handle, |
| pstopcmd); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_start_extscan_cmd() - start extscan command to fw. |
| * @wmi_hdl: wmi handle |
| * @pstart: scan command request params |
| * |
| * This function sends start extscan request to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS wmi_unified_start_extscan_cmd(void *wmi_hdl, |
| struct wifi_scan_cmd_req_params *pstart) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_start_extscan_cmd) |
| return wmi_handle->ops->send_start_extscan_cmd(wmi_handle, |
| pstart); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_plm_stop_cmd() - plm stop request |
| * @wmi_hdl: wmi handle |
| * @plm: plm request parameters |
| * |
| * This function request FW to stop PLM. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_plm_stop_cmd(void *wmi_hdl, |
| const struct plm_req_params *plm) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_plm_stop_cmd) |
| return wmi_handle->ops->send_plm_stop_cmd(wmi_handle, |
| plm); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_plm_start_cmd() - plm start request |
| * @wmi_hdl: wmi handle |
| * @plm: plm request parameters |
| * |
| * This function request FW to start PLM. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_plm_start_cmd(void *wmi_hdl, |
| const struct plm_req_params *plm, |
| uint32_t *gchannel_list) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_plm_start_cmd) |
| return wmi_handle->ops->send_plm_start_cmd(wmi_handle, |
| plm, gchannel_list); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * send_pno_stop_cmd() - PNO stop request |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * |
| * This function request FW to stop ongoing PNO operation. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pno_stop_cmd(void *wmi_hdl, uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pno_stop_cmd) |
| return wmi_handle->ops->send_pno_stop_cmd(wmi_handle, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pno_start_cmd() - PNO start request |
| * @wmi_hdl: wmi handle |
| * @pno: PNO request |
| * @gchannel_freq_list: channel frequency list |
| * |
| * This function request FW to start PNO request. |
| * Request: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| #ifdef FEATURE_WLAN_SCAN_PNO |
| QDF_STATUS wmi_unified_pno_start_cmd(void *wmi_hdl, |
| struct pno_scan_req_params *pno, |
| uint32_t *gchannel_freq_list) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pno_start_cmd) |
| return wmi_handle->ops->send_pno_start_cmd(wmi_handle, |
| pno, gchannel_freq_list); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| /* wmi_unified_set_ric_req_cmd() - set ric request element |
| * @wmi_hdl: wmi handle |
| * @msg: message |
| * @is_add_ts: is addts required |
| * |
| * This function sets ric request element for 11r roaming. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_ric_req_cmd(void *wmi_hdl, void *msg, |
| uint8_t is_add_ts) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ric_req_cmd) |
| return wmi_handle->ops->send_set_ric_req_cmd(wmi_handle, msg, |
| is_add_ts); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_ll_stats_clear_cmd() - clear link layer stats |
| * @wmi_hdl: wmi handle |
| * @clear_req: ll stats clear request command params |
| * @addr: mac address |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_ll_stats_clear_cmd(void *wmi_hdl, |
| const struct ll_stats_clear_params *clear_req, |
| uint8_t addr[IEEE80211_ADDR_LEN]) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_ll_stats_clear_cmd) |
| return wmi_handle->ops->send_process_ll_stats_clear_cmd(wmi_handle, |
| clear_req, addr); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_ll_stats_get_cmd() - link layer stats get request |
| * @wmi_hdl:wmi handle |
| * @get_req:ll stats get request command params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_ll_stats_get_cmd(void *wmi_hdl, |
| const struct ll_stats_get_params *get_req, |
| uint8_t addr[IEEE80211_ADDR_LEN]) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_ll_stats_get_cmd) |
| return wmi_handle->ops->send_process_ll_stats_get_cmd(wmi_handle, |
| get_req, addr); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_get_stats_cmd() - get stats request |
| * @wmi_hdl: wma handle |
| * @get_stats_param: stats params |
| * @addr: mac address |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_get_stats_cmd(void *wmi_hdl, |
| struct pe_stats_req *get_stats_param, |
| uint8_t addr[IEEE80211_ADDR_LEN]) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_get_stats_cmd) |
| return wmi_handle->ops->send_get_stats_cmd(wmi_handle, |
| get_stats_param, addr); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_ll_stats_set_cmd() - link layer stats set request |
| * @wmi_handle: wmi handle |
| * @set_req: ll stats set request command params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_ll_stats_set_cmd(void *wmi_hdl, |
| const struct ll_stats_set_params *set_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_ll_stats_set_cmd) |
| return wmi_handle->ops->send_process_ll_stats_set_cmd(wmi_handle, |
| set_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_snr_request_cmd() - send request to fw to get RSSI stats |
| * @wmi_handle: wmi handle |
| * @rssi_req: get RSSI request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_snr_request_cmd(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_snr_request_cmd) |
| return wmi_handle->ops->send_snr_request_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_snr_cmd() - get RSSI from fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_snr_cmd(void *wmi_hdl, uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_snr_cmd) |
| return wmi_handle->ops->send_snr_cmd(wmi_handle, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_link_status_req_cmd() - process link status request from UMAC |
| * @wmi_handle: wmi handle |
| * @link_status: get link params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_link_status_req_cmd(void *wmi_hdl, |
| struct link_status_params *link_status) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_link_status_req_cmd) |
| return wmi_handle->ops->send_link_status_req_cmd(wmi_handle, |
| link_status); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #ifdef FEATURE_WLAN_LPHB |
| |
| /** |
| * wmi_unified_lphb_config_hbenable_cmd() - enable command of LPHB configuration requests |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: configuration info |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_hbenable_cmd(void *wmi_hdl, |
| wmi_hb_set_enable_cmd_fixed_param *params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lphb_config_hbenable_cmd) |
| return wmi_handle->ops->send_lphb_config_hbenable_cmd(wmi_handle, |
| params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_lphb_config_tcp_params_cmd() - set tcp params of LPHB configuration requests |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_tcp_params_cmd(void *wmi_hdl, |
| wmi_hb_set_tcp_params_cmd_fixed_param *lphb_conf_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lphb_config_tcp_params_cmd) |
| return wmi_handle->ops->send_lphb_config_tcp_params_cmd(wmi_handle, |
| lphb_conf_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_lphb_config_tcp_pkt_filter_cmd() - configure tcp packet filter command of LPHB |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_tcp_pkt_filter_cmd(void *wmi_hdl, |
| wmi_hb_set_tcp_pkt_filter_cmd_fixed_param *g_hb_tcp_filter_fp) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lphb_config_tcp_pkt_filter_cmd) |
| return wmi_handle->ops->send_lphb_config_tcp_pkt_filter_cmd(wmi_handle, |
| g_hb_tcp_filter_fp); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_lphb_config_udp_params_cmd() - configure udp param command of LPHB |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_udp_params_cmd(void *wmi_hdl, |
| wmi_hb_set_udp_params_cmd_fixed_param *lphb_conf_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lphb_config_udp_params_cmd) |
| return wmi_handle->ops->send_lphb_config_udp_params_cmd(wmi_handle, |
| lphb_conf_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_lphb_config_udp_pkt_filter_cmd() - configure udp pkt filter command of LPHB |
| * @wmi_handle: wmi handle |
| * @lphb_conf_req: lphb config request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lphb_config_udp_pkt_filter_cmd(void *wmi_hdl, |
| wmi_hb_set_udp_pkt_filter_cmd_fixed_param *lphb_conf_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lphb_config_udp_pkt_filter_cmd) |
| return wmi_handle->ops->send_lphb_config_udp_pkt_filter_cmd(wmi_handle, |
| lphb_conf_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif /* FEATURE_WLAN_LPHB */ |
| |
| /** |
| * wmi_unified_process_dhcp_ind() - process dhcp indication from SME |
| * @wmi_handle: wmi handle |
| * @ta_dhcp_ind: DHCP indication parameter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| #ifndef WMI_NON_TLV_SUPPORT |
| QDF_STATUS wmi_unified_process_dhcp_ind(void *wmi_hdl, |
| wmi_peer_set_param_cmd_fixed_param *ta_dhcp_ind) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_dhcp_ind_cmd) |
| return wmi_handle->ops->send_process_dhcp_ind_cmd(wmi_handle, |
| ta_dhcp_ind); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_get_link_speed_cmd() -send command to get linkspeed |
| * @wmi_handle: wmi handle |
| * @pLinkSpeed: link speed info |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_get_link_speed_cmd(void *wmi_hdl, |
| wmi_mac_addr peer_macaddr) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_get_link_speed_cmd) |
| return wmi_handle->ops->send_get_link_speed_cmd(wmi_handle, |
| peer_macaddr); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_egap_conf_params_cmd() - send wmi cmd of egap configuration params |
| * @wmi_handle: wmi handler |
| * @egap_params: pointer to egap_params |
| * |
| * Return: 0 for success, otherwise appropriate error code |
| */ |
| QDF_STATUS wmi_unified_egap_conf_params_cmd(void *wmi_hdl, |
| wmi_ap_ps_egap_param_cmd_fixed_param *egap_params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_egap_conf_params_cmd) |
| return wmi_handle->ops->send_egap_conf_params_cmd(wmi_handle, |
| egap_params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| /** |
| * wmi_unified_fw_profiling_data_cmd() - send FW profiling cmd to WLAN FW |
| * @wmi_handl: wmi handle |
| * @cmd: Profiling command index |
| * @value1: parameter1 value |
| * @value2: parameter2 value |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_fw_profiling_data_cmd(void *wmi_hdl, |
| uint32_t cmd, uint32_t value1, uint32_t value2) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_fw_profiling_cmd) |
| return wmi_handle->ops->send_fw_profiling_cmd(wmi_handle, |
| cmd, value1, value2); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #ifdef FEATURE_WLAN_RA_FILTERING |
| /** |
| * wmi_unified_wow_sta_ra_filter_cmd() - set RA filter pattern in fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_sta_ra_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, uint8_t default_pattern, |
| uint16_t rate_limit_interval) |
| { |
| |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_wow_sta_ra_filter_cmd) |
| return wmi_handle->ops->send_wow_sta_ra_filter_cmd(wmi_handle, |
| vdev_id, default_pattern, rate_limit_interval); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| #endif /* FEATURE_WLAN_RA_FILTERING */ |
| |
| /** |
| * wmi_unified_nat_keepalive_en_cmd() - enable NAT keepalive filter |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_nat_keepalive_en_cmd(void *wmi_hdl, uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_nat_keepalive_en_cmd) |
| return wmi_handle->ops->send_nat_keepalive_en_cmd(wmi_handle, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_csa_offload_enable() - send CSA offload enable command |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_csa_offload_enable(void *wmi_hdl, uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_csa_offload_enable_cmd) |
| return wmi_handle->ops->send_csa_offload_enable_cmd(wmi_handle, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| /** |
| * wmi_unified_start_oem_data_cmd() - start OEM data request to target |
| * @wmi_handle: wmi handle |
| * @startOemDataReq: start request params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_start_oem_data_cmd(void *wmi_hdl, |
| uint8_t data_len, |
| uint8_t *data) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_start_oem_data_cmd) |
| return wmi_handle->ops->send_start_oem_data_cmd(wmi_handle, |
| data_len, data); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_dfs_phyerr_filter_offload_en_cmd() - enable dfs phyerr filter |
| * @wmi_handle: wmi handle |
| * @dfs_phyerr_filter_offload: is dfs phyerr filter offload |
| * |
| * Send WMI_DFS_PHYERR_FILTER_ENA_CMDID or |
| * WMI_DFS_PHYERR_FILTER_DIS_CMDID command |
| * to firmware based on phyerr filtering |
| * offload status. |
| * |
| * Return: 1 success, 0 failure |
| */ |
| QDF_STATUS |
| wmi_unified_dfs_phyerr_filter_offload_en_cmd(void *wmi_hdl, |
| bool dfs_phyerr_filter_offload) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_dfs_phyerr_filter_offload_en_cmd) |
| return wmi_handle->ops->send_dfs_phyerr_filter_offload_en_cmd(wmi_handle, |
| dfs_phyerr_filter_offload); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| #if !defined(REMOVE_PKT_LOG) |
| /** |
| * wmi_unified_pktlog_wmi_send_cmd() - send pktlog enable/disable command to target |
| * @wmi_handle: wmi handle |
| * @pktlog_event: pktlog event |
| * @cmd_id: pktlog cmd id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| #ifndef WMI_NON_TLV_SUPPORT |
| QDF_STATUS wmi_unified_pktlog_wmi_send_cmd(void *wmi_hdl, |
| WMI_PKTLOG_EVENT pktlog_event, |
| WMI_CMD_ID cmd_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pktlog_wmi_send_cmd) |
| return wmi_handle->ops->send_pktlog_wmi_send_cmd(wmi_handle, |
| pktlog_event, cmd_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| #endif /* REMOVE_PKT_LOG */ |
| |
| /** |
| * wmi_unified_add_wow_wakeup_event_cmd() - Configures wow wakeup events. |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @bitmap: Event bitmap |
| * @enable: enable/disable |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_add_wow_wakeup_event_cmd(void *wmi_hdl, |
| uint32_t vdev_id, |
| uint32_t bitmap, |
| bool enable) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_add_wow_wakeup_event_cmd) |
| return wmi_handle->ops->send_add_wow_wakeup_event_cmd( |
| wmi_handle, vdev_id, bitmap, enable); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wow_patterns_to_fw_cmd() - Sends WOW patterns to FW. |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @ptrn_id: pattern id |
| * @ptrn: pattern |
| * @ptrn_len: pattern length |
| * @ptrn_offset: pattern offset |
| * @mask: mask |
| * @mask_len: mask length |
| * @user: true for user configured pattern and false for default pattern |
| * @default_patterns: default patterns |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_patterns_to_fw_cmd(void *wmi_hdl, |
| uint8_t vdev_id, uint8_t ptrn_id, |
| const uint8_t *ptrn, uint8_t ptrn_len, |
| uint8_t ptrn_offset, const uint8_t *mask, |
| uint8_t mask_len, bool user, |
| uint8_t default_patterns) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_wow_patterns_to_fw_cmd) |
| return wmi_handle->ops->send_wow_patterns_to_fw_cmd(wmi_handle, |
| vdev_id, ptrn_id, ptrn, |
| ptrn_len, ptrn_offset, mask, |
| mask_len, user, default_patterns); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wow_delete_pattern_cmd() - delete wow pattern in target |
| * @wmi_handle: wmi handle |
| * @ptrn_id: pattern id |
| * @vdev_id: vdev id |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wow_delete_pattern_cmd(void *wmi_hdl, uint8_t ptrn_id, |
| uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_wow_delete_pattern_cmd) |
| return wmi_handle->ops->send_wow_delete_pattern_cmd(wmi_handle, |
| ptrn_id, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_host_wakeup_ind_to_fw_cmd() - send wakeup ind to fw |
| * @wmi_handle: wmi handle |
| * |
| * Sends host wakeup indication to FW. On receiving this indication, |
| * FW will come out of WOW. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_host_wakeup_ind_to_fw_cmd(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_host_wakeup_ind_to_fw_cmd) |
| return wmi_handle->ops->send_host_wakeup_ind_to_fw_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_del_ts_cmd() - send DELTS request to fw |
| * @wmi_handle: wmi handle |
| * @msg: delts params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_del_ts_cmd(void *wmi_hdl, uint8_t vdev_id, |
| uint8_t ac) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_del_ts_cmd) |
| return wmi_handle->ops->send_del_ts_cmd(wmi_handle, |
| vdev_id, ac); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_aggr_qos_cmd() - send aggr qos request to fw |
| * @wmi_handle: handle to wmi |
| * @aggr_qos_rsp_msg - combined struct for all ADD_TS requests. |
| * |
| * A function to handle WMI_AGGR_QOS_REQ. This will send out |
| * ADD_TS requestes to firmware in loop for all the ACs with |
| * active flow. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_aggr_qos_cmd(void *wmi_hdl, |
| struct aggr_add_ts_param *aggr_qos_rsp_msg) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_aggr_qos_cmd) |
| return wmi_handle->ops->send_aggr_qos_cmd(wmi_handle, |
| aggr_qos_rsp_msg); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_add_ts_cmd() - send ADDTS request to fw |
| * @wmi_handle: wmi handle |
| * @msg: ADDTS params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_add_ts_cmd(void *wmi_hdl, |
| struct add_ts_param *msg) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_add_ts_cmd) |
| return wmi_handle->ops->send_add_ts_cmd(wmi_handle, |
| msg); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_enable_disable_packet_filter_cmd() - enable/disable packet filter in target |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @enable: Flag to enable/disable packet filter |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_enable_disable_packet_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, bool enable) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_enable_disable_packet_filter_cmd) |
| return wmi_handle->ops->send_enable_disable_packet_filter_cmd( |
| wmi_handle, vdev_id, enable); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_config_packet_filter_cmd() - configure packet filter in target |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @rcv_filter_param: Packet filter parameters |
| * @filter_id: Filter id |
| * @enable: Flag to add/delete packet filter configuration |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_config_packet_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, struct rcv_pkt_filter_config *rcv_filter_param, |
| uint8_t filter_id, bool enable) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_config_packet_filter_cmd) |
| return wmi_handle->ops->send_config_packet_filter_cmd(wmi_handle, |
| vdev_id, rcv_filter_param, |
| filter_id, enable); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_add_clear_mcbc_filter_cmd() - set mcast filter command to fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @multicastAddr: mcast address |
| * @clearList: clear list flag |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_add_clear_mcbc_filter_cmd(void *wmi_hdl, |
| uint8_t vdev_id, |
| struct qdf_mac_addr multicast_addr, |
| bool clearList) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_add_clear_mcbc_filter_cmd) |
| return wmi_handle->ops->send_add_clear_mcbc_filter_cmd(wmi_handle, |
| vdev_id, multicast_addr, clearList); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_send_gtk_offload_cmd() - send GTK offload command to fw |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @params: GTK offload parameters |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_send_gtk_offload_cmd(void *wmi_hdl, uint8_t vdev_id, |
| struct gtk_offload_params *params, |
| bool enable_offload, |
| uint32_t gtk_offload_opcode) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_gtk_offload_cmd) |
| return wmi_handle->ops->send_gtk_offload_cmd(wmi_handle, |
| vdev_id, params, |
| enable_offload, gtk_offload_opcode); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_gtk_offload_getinfo_cmd() - send GTK offload cmd to fw |
| * @wmi_handle: wmi handle |
| * @params: GTK offload params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_gtk_offload_getinfo_cmd(void *wmi_hdl, |
| uint8_t vdev_id, |
| uint64_t offload_req_opcode) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_gtk_offload_getinfo_cmd) |
| return wmi_handle->ops->send_process_gtk_offload_getinfo_cmd(wmi_handle, |
| vdev_id, |
| offload_req_opcode); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_add_periodic_tx_ptrn_cmd - add periodic tx ptrn |
| * @wmi_handle: wmi handle |
| * @pAddPeriodicTxPtrnParams: tx ptrn params |
| * |
| * Retrun: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_add_periodic_tx_ptrn_cmd(void *wmi_hdl, |
| struct periodic_tx_pattern * |
| pAddPeriodicTxPtrnParams, |
| uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_add_periodic_tx_ptrn_cmd) |
| return wmi_handle->ops->send_process_add_periodic_tx_ptrn_cmd(wmi_handle, |
| pAddPeriodicTxPtrnParams, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_del_periodic_tx_ptrn_cmd - del periodic tx ptrn |
| * @wmi_handle: wmi handle |
| * @vdev_id: vdev id |
| * @pattern_id: pattern id |
| * |
| * Retrun: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_del_periodic_tx_ptrn_cmd(void *wmi_hdl, |
| uint8_t vdev_id, |
| uint8_t pattern_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_del_periodic_tx_ptrn_cmd) |
| return wmi_handle->ops->send_process_del_periodic_tx_ptrn_cmd(wmi_handle, |
| vdev_id, |
| pattern_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_stats_ext_req_cmd() - request ext stats from fw |
| * @wmi_handle: wmi handle |
| * @preq: stats ext params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_stats_ext_req_cmd(void *wmi_hdl, |
| struct stats_ext_params *preq) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_stats_ext_req_cmd) |
| return wmi_handle->ops->send_stats_ext_req_cmd(wmi_handle, |
| preq); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_enable_ext_wow_cmd() - enable ext wow in fw |
| * @wmi_handle: wmi handle |
| * @params: ext wow params |
| * |
| * Return:QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_enable_ext_wow_cmd(void *wmi_hdl, |
| struct ext_wow_params *params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_enable_ext_wow_cmd) |
| return wmi_handle->ops->send_enable_ext_wow_cmd(wmi_handle, |
| params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_app_type2_params_in_fw_cmd() - set app type2 params in fw |
| * @wmi_handle: wmi handle |
| * @appType2Params: app type2 params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_app_type2_params_in_fw_cmd(void *wmi_hdl, |
| struct app_type2_params *appType2Params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_app_type2_params_in_fw_cmd) |
| return wmi_handle->ops->send_set_app_type2_params_in_fw_cmd(wmi_handle, |
| appType2Params); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_unified_set_auto_shutdown_timer_cmd() - sets auto shutdown timer in firmware |
| * @wmi_handle: wmi handle |
| * @timer_val: auto shutdown timer value |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_auto_shutdown_timer_cmd(void *wmi_hdl, |
| uint32_t timer_val) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_auto_shutdown_timer_cmd) |
| return wmi_handle->ops->send_set_auto_shutdown_timer_cmd(wmi_handle, |
| timer_val); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_nan_req_cmd() - to send nan request to target |
| * @wmi_handle: wmi handle |
| * @nan_req: request data which will be non-null |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_nan_req_cmd(void *wmi_hdl, |
| struct nan_req_params *nan_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_nan_req_cmd) |
| return wmi_handle->ops->send_nan_req_cmd(wmi_handle, |
| nan_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_dhcpserver_offload_cmd() - enable DHCP server offload |
| * @wmi_handle: wmi handle |
| * @pDhcpSrvOffloadInfo: DHCP server offload info |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_dhcpserver_offload_cmd(void *wmi_hdl, |
| struct dhcp_offload_info_params *pDhcpSrvOffloadInfo) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_dhcpserver_offload_cmd) |
| return wmi_handle->ops->send_process_dhcpserver_offload_cmd(wmi_handle, |
| pDhcpSrvOffloadInfo); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_ch_avoid_update_cmd() - handles channel avoid update request |
| * @wmi_handle: wmi handle |
| * @ch_avoid_update_req: channel avoid update params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_process_ch_avoid_update_cmd(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_ch_avoid_update_cmd) |
| return wmi_handle->ops->send_process_ch_avoid_update_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_send_regdomain_info_to_fw_cmd() - send regdomain info to fw |
| * @wmi_handle: wmi handle |
| * @reg_dmn: reg domain |
| * @regdmn2G: 2G reg domain |
| * @regdmn5G: 5G reg domain |
| * @ctl2G: 2G test limit |
| * @ctl5G: 5G test limit |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_send_regdomain_info_to_fw_cmd(void *wmi_hdl, |
| uint32_t reg_dmn, uint16_t regdmn2G, |
| uint16_t regdmn5G, int8_t ctl2G, |
| int8_t ctl5G) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_regdomain_info_to_fw_cmd) |
| return wmi_handle->ops->send_regdomain_info_to_fw_cmd(wmi_handle, |
| reg_dmn, regdmn2G, |
| regdmn5G, ctl2G, |
| ctl5G); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| |
| /** |
| * wmi_unified_set_tdls_offchan_mode_cmd() - set tdls off channel mode |
| * @wmi_handle: wmi handle |
| * @chan_switch_params: Pointer to tdls channel switch parameter structure |
| * |
| * This function sets tdls off channel mode |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures; |
| * Negative errno otherwise |
| */ |
| QDF_STATUS wmi_unified_set_tdls_offchan_mode_cmd(void *wmi_hdl, |
| struct tdls_channel_switch_params *chan_switch_params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_tdls_offchan_mode_cmd) |
| return wmi_handle->ops->send_set_tdls_offchan_mode_cmd(wmi_handle, |
| chan_switch_params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_update_fw_tdls_state_cmd() - send enable/disable tdls for a vdev |
| * @wmi_handle: wmi handle |
| * @pwmaTdlsparams: TDLS params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_update_fw_tdls_state_cmd(void *wmi_hdl, |
| void *tdls_param, uint8_t tdls_state) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_update_fw_tdls_state_cmd) |
| return wmi_handle->ops->send_update_fw_tdls_state_cmd(wmi_handle, |
| tdls_param, tdls_state); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_update_tdls_peer_state_cmd() - update TDLS peer state |
| * @wmi_handle: wmi handle |
| * @peerStateParams: TDLS peer state params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_update_tdls_peer_state_cmd(void *wmi_hdl, |
| struct tdls_peer_state_params *peerStateParams, |
| uint32_t *ch_mhz) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_update_tdls_peer_state_cmd) |
| return wmi_handle->ops->send_update_tdls_peer_state_cmd(wmi_handle, |
| peerStateParams, ch_mhz); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_fw_mem_dump_cmd() - Function to request fw memory dump from |
| * firmware |
| * @wmi_handle: Pointer to wmi handle |
| * @mem_dump_req: Pointer for mem_dump_req |
| * |
| * This function sends memory dump request to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| * |
| */ |
| QDF_STATUS wmi_unified_process_fw_mem_dump_cmd(void *wmi_hdl, |
| struct fw_dump_req_param *mem_dump_req) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_fw_mem_dump_cmd) |
| return wmi_handle->ops->send_process_fw_mem_dump_cmd(wmi_handle, |
| mem_dump_req); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_process_set_ie_info_cmd() - Function to send IE info to firmware |
| * @wmi_handle: Pointer to WMi handle |
| * @ie_data: Pointer for ie data |
| * |
| * This function sends IE information to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| * |
| */ |
| QDF_STATUS wmi_unified_process_set_ie_info_cmd(void *wmi_hdl, |
| struct vdev_ie_info_param *ie_info) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_set_ie_info_cmd) |
| return wmi_handle->ops->send_process_set_ie_info_cmd(wmi_handle, |
| ie_info); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_send_init_cmd() - wmi init command |
| * @wmi_handle: pointer to wmi handle |
| * @res_cfg: resource config |
| * @num_mem_chunks: no of mem chunck |
| * @mem_chunk: pointer to mem chunck structure |
| * |
| * This function sends IE information to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| * |
| */ |
| QDF_STATUS wmi_unified_send_init_cmd(void *wmi_hdl, |
| wmi_resource_config *res_cfg, |
| uint8_t num_mem_chunks, struct wmi_host_mem_chunk *mem_chunk, |
| bool action) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_init_cmd) |
| return wmi_handle->ops->send_init_cmd(wmi_handle, |
| res_cfg, num_mem_chunks, mem_chunk, action); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_send_saved_init_cmd() - wmi init command |
| * @wmi_handle: pointer to wmi handle |
| * |
| * This function sends IE information to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| * |
| */ |
| QDF_STATUS wmi_unified_send_saved_init_cmd(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_saved_init_cmd) |
| return wmi_handle->ops->send_saved_init_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_save_fw_version_cmd() - save fw version |
| * @wmi_handle: pointer to wmi handle |
| * @res_cfg: resource config |
| * @num_mem_chunks: no of mem chunck |
| * @mem_chunk: pointer to mem chunck structure |
| * |
| * This function sends IE information to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| * |
| */ |
| QDF_STATUS wmi_unified_save_fw_version_cmd(void *wmi_hdl, |
| void *evt_buf) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->save_fw_version_cmd) |
| return wmi_handle->ops->save_fw_version_cmd(wmi_handle, |
| evt_buf); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * send_set_base_macaddr_indicate_cmd() - set base mac address in fw |
| * @wmi_hdl: wmi handle |
| * @custom_addr: base mac address |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_base_macaddr_indicate_cmd(void *wmi_hdl, |
| uint8_t *custom_addr) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_base_macaddr_indicate_cmd) |
| return wmi_handle->ops->send_set_base_macaddr_indicate_cmd(wmi_handle, |
| custom_addr); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_log_supported_evt_cmd() - Enable/Disable FW diag/log events |
| * @wmi_hdl: wmi handle |
| * @event: Event received from FW |
| * @len: Length of the event |
| * |
| * Enables the low frequency events and disables the high frequency |
| * events. Bit 17 indicates if the event if low/high frequency. |
| * 1 - high frequency, 0 - low frequency |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures |
| */ |
| QDF_STATUS wmi_unified_log_supported_evt_cmd(void *wmi_hdl, |
| uint8_t *event, |
| uint32_t len) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_log_supported_evt_cmd) |
| return wmi_handle->ops->send_log_supported_evt_cmd(wmi_handle, |
| event, len); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_enable_specific_fw_logs_cmd() - Start/Stop logging of diag log id |
| * @wmi_hdl: wmi handle |
| * @start_log: Start logging related parameters |
| * |
| * Send the command to the FW based on which specific logging of diag |
| * event/log id can be started/stopped |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_enable_specific_fw_logs_cmd(void *wmi_hdl, |
| struct wmi_wifi_start_log *start_log) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_enable_specific_fw_logs_cmd) |
| return wmi_handle->ops->send_enable_specific_fw_logs_cmd(wmi_handle, |
| start_log); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_flush_logs_to_fw_cmd() - Send log flush command to FW |
| * @wmi_hdl: WMI handle |
| * |
| * This function is used to send the flush command to the FW, |
| * that will flush the fw logs that are residue in the FW |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_flush_logs_to_fw_cmd(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_flush_logs_to_fw_cmd) |
| return wmi_handle->ops->send_flush_logs_to_fw_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_set_pcl_cmd() - Send WMI_SOC_SET_PCL_CMDID to FW |
| * @wmi_hdl: wmi handle |
| * @msg: PCL structure containing the PCL and the number of channels |
| * |
| * WMI_SOC_SET_PCL_CMDID provides a Preferred Channel List (PCL) to the WLAN |
| * firmware. The DBS Manager is the consumer of this information in the WLAN |
| * firmware. The channel list will be used when a Virtual DEVice (VDEV) needs |
| * to migrate to a new channel without host driver involvement. An example of |
| * this behavior is Legacy Fast Roaming (LFR 3.0). Generally, the host will |
| * manage the channel selection without firmware involvement. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pdev_set_pcl_cmd(void *wmi_hdl, |
| struct wmi_pcl_chan_weights *msg) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_set_pcl_cmd) |
| return wmi_handle->ops->send_pdev_set_pcl_cmd(wmi_handle, msg); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_soc_set_hw_mode_cmd() - Send WMI_SOC_SET_HW_MODE_CMDID to FW |
| * @wmi_hdl: wmi handle |
| * @msg: Structure containing the following parameters |
| * |
| * - hw_mode_index: The HW_Mode field is a enumerated type that is selected |
| * from the HW_Mode table, which is returned in the WMI_SERVICE_READY_EVENTID. |
| * |
| * Provides notification to the WLAN firmware that host driver is requesting a |
| * HardWare (HW) Mode change. This command is needed to support iHelium in the |
| * configurations that include the Dual Band Simultaneous (DBS) feature. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_soc_set_hw_mode_cmd(void *wmi_hdl, |
| uint32_t hw_mode_index) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_set_hw_mode_cmd) |
| return wmi_handle->ops->send_pdev_set_hw_mode_cmd(wmi_handle, |
| hw_mode_index); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_set_dual_mac_config_cmd() - Set dual mac config to FW |
| * @wmi_hdl: wmi handle |
| * @msg: Dual MAC config parameters |
| * |
| * Configures WLAN firmware with the dual MAC features |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failures. |
| */ |
| QDF_STATUS wmi_unified_pdev_set_dual_mac_config_cmd(void *wmi_hdl, |
| struct wmi_dual_mac_config *msg) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_set_dual_mac_config_cmd) |
| return wmi_handle->ops->send_pdev_set_dual_mac_config_cmd(wmi_handle, |
| msg); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_enable_arp_ns_offload_cmd() - enable ARP NS offload |
| * @wmi_hdl: wmi handle |
| * @param: offload request |
| * @arp_only: flag |
| * |
| * To configure ARP NS off load data to firmware |
| * when target goes to wow mode. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_enable_arp_ns_offload_cmd(void *wmi_hdl, |
| struct host_offload_req_param *param, bool arp_only, |
| uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_enable_arp_ns_offload_cmd) |
| return wmi_handle->ops->send_enable_arp_ns_offload_cmd(wmi_handle, |
| param, arp_only, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_led_flashing_cmd() - set led flashing in fw |
| * @wmi_hdl: wmi handle |
| * @flashing: flashing request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_led_flashing_cmd(void *wmi_hdl, |
| struct flashing_req_params *flashing) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_led_flashing_cmd) |
| return wmi_handle->ops->send_set_led_flashing_cmd(wmi_handle, |
| flashing); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_app_type1_params_in_fw_cmd() - set app type1 params in fw |
| * @wmi_hdl: wmi handle |
| * @appType1Params: app type1 params |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_app_type1_params_in_fw_cmd(void *wmi_hdl, |
| struct app_type1_params *app_type1_params) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_app_type1_params_in_fw_cmd) |
| return wmi_handle->ops->send_app_type1_params_in_fw_cmd(wmi_handle, |
| app_type1_params); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_ssid_hotlist_cmd() - Handle an SSID hotlist set request |
| * @wmi_hdl: wmi handle |
| * @request: SSID hotlist set request |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS |
| wmi_unified_set_ssid_hotlist_cmd(void *wmi_hdl, |
| struct ssid_hotlist_request_params *request) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ssid_hotlist_cmd) |
| return wmi_handle->ops->send_set_ssid_hotlist_cmd(wmi_handle, |
| request); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_roam_synch_complete_cmd() - roam synch complete command to fw. |
| * @wmi_hdl: wmi handle |
| * @vdev_id: vdev id |
| * |
| * This function sends roam synch complete event to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_synch_complete_cmd(void *wmi_hdl, |
| uint8_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_process_roam_synch_complete_cmd) |
| return wmi_handle->ops->send_process_roam_synch_complete_cmd(wmi_handle, |
| vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_unit_test_cmd() - send unit test command to fw. |
| * @wmi_hdl: wmi handle |
| * @wmi_utest: unit test command |
| * |
| * This function send unit test command to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_unit_test_cmd(void *wmi_hdl, |
| struct wmi_unit_test_cmd *wmi_utest) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_unit_test_cmd) |
| return wmi_handle->ops->send_unit_test_cmd(wmi_handle, |
| wmi_utest); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified__roam_invoke_cmd() - send roam invoke command to fw. |
| * @wmi_hdl: wmi handle |
| * @roaminvoke: roam invoke command |
| * |
| * Send roam invoke command to fw for fastreassoc. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_invoke_cmd(void *wmi_hdl, |
| struct wmi_roam_invoke_cmd *roaminvoke, |
| uint32_t ch_hz) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_invoke_cmd) |
| return wmi_handle->ops->send_roam_invoke_cmd(wmi_handle, |
| roaminvoke, ch_hz); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_roam_scan_offload_cmd() - set roam offload command |
| * @wmi_hdl: wmi handle |
| * @command: command |
| * @vdev_id: vdev id |
| * |
| * This function set roam offload command to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_scan_offload_cmd(void *wmi_hdl, |
| uint32_t command, uint32_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_offload_cmd) |
| return wmi_handle->ops->send_roam_scan_offload_cmd(wmi_handle, |
| command, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #ifndef WMI_NON_TLV_SUPPORT |
| /** |
| * wmi_unified_send_roam_scan_offload_ap_cmd() - set roam ap profile in fw |
| * @wmi_hdl: wmi handle |
| * @ap_profile_p: ap profile |
| * @vdev_id: vdev id |
| * |
| * Send WMI_ROAM_AP_PROFILE to firmware |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_send_roam_scan_offload_ap_cmd(void *wmi_hdl, |
| wmi_ap_profile *ap_profile_p, |
| uint32_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_offload_ap_profile_cmd) |
| return wmi_handle->ops->send_roam_scan_offload_ap_profile_cmd(wmi_handle, |
| ap_profile_p, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| /** |
| * wmi_unified_roam_scan_offload_scan_period() - set roam offload scan period |
| * @wmi_handle: wmi handle |
| * @scan_period: scan period |
| * @scan_age: scan age |
| * @vdev_id: vdev id |
| * |
| * Send WMI_ROAM_SCAN_PERIOD parameters to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_scan_offload_scan_period(void *wmi_hdl, |
| uint32_t scan_period, |
| uint32_t scan_age, |
| uint32_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_offload_scan_period_cmd) |
| return wmi_handle->ops->send_roam_scan_offload_scan_period_cmd(wmi_handle, |
| scan_period, scan_age, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_roam_scan_offload_chan_list_cmd() - set roam offload channel list |
| * @wmi_handle: wmi handle |
| * @chan_count: channel count |
| * @chan_list: channel list |
| * @list_type: list type |
| * @vdev_id: vdev id |
| * |
| * Set roam offload channel list. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_scan_offload_chan_list_cmd(void *wmi_hdl, |
| uint8_t chan_count, |
| uint8_t *chan_list, |
| uint8_t list_type, uint32_t vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_offload_chan_list_cmd) |
| return wmi_handle->ops->send_roam_scan_offload_chan_list_cmd(wmi_handle, |
| chan_count, chan_list, |
| list_type, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_roam_scan_offload_rssi_change_cmd() - set roam offload RSSI th |
| * @wmi_hdl: wmi handle |
| * @rssi_change_thresh: RSSI Change threshold |
| * @bcn_rssi_weight: beacon RSSI weight |
| * @vdev_id: vdev id |
| * |
| * Send WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD parameters to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_roam_scan_offload_rssi_change_cmd(void *wmi_hdl, |
| uint32_t vdev_id, |
| int32_t rssi_change_thresh, |
| uint32_t bcn_rssi_weight, |
| uint32_t hirssi_delay_btw_scans) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_roam_scan_offload_rssi_change_cmd) |
| return wmi_handle->ops->send_roam_scan_offload_rssi_change_cmd(wmi_handle, |
| vdev_id, rssi_change_thresh, |
| bcn_rssi_weight, hirssi_delay_btw_scans); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_get_buf_extscan_hotlist_cmd() - prepare hotlist command |
| * @wmi_hdl: wmi handle |
| * @photlist: hotlist command params |
| * @buf_len: buffer length |
| * |
| * This function fills individual elements for hotlist request and |
| * TLV for bssid entries |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure. |
| */ |
| QDF_STATUS wmi_unified_get_buf_extscan_hotlist_cmd(void *wmi_hdl, |
| struct ext_scan_setbssi_hotlist_params * |
| photlist, int *buf_len) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_get_buf_extscan_hotlist_cmd) |
| return wmi_handle->ops->send_get_buf_extscan_hotlist_cmd(wmi_handle, |
| photlist, buf_len); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_get_tpc_config_cmd_send() - WMI get tpc config function |
| * @param wmi_handle : handle to WMI. |
| * @param param : tpc config param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pdev_get_tpc_config_cmd_send(void *wmi_hdl, |
| uint32_t param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_get_tpc_config_cmd) |
| return wmi_handle->ops->send_pdev_get_tpc_config_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_atf_cmd_send() - WMI set atf function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to set atf param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_atf_cmd_send(void *wmi_hdl, |
| struct set_atf_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_atf_cmd) |
| return wmi_handle->ops->send_set_atf_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_fips_cmd_send() - WMI pdev fips cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold pdev fips param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pdev_fips_cmd_send(void *wmi_hdl, |
| struct fips_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_fips_cmd) |
| return wmi_handle->ops->send_pdev_fips_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wlan_profile_enable_cmd_send() - WMI wlan profile enable cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold wlan profile param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wlan_profile_enable_cmd_send(void *wmi_hdl, |
| struct wlan_profile_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_wlan_profile_enable_cmd) |
| return wmi_handle->ops->send_wlan_profile_enable_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wlan_profile_trigger_cmd_send() - WMI wlan profile trigger cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold wlan profile param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wlan_profile_trigger_cmd_send(void *wmi_hdl, |
| struct wlan_profile_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_wlan_profile_trigger_cmd) |
| return wmi->ops->send_wlan_profile_trigger_cmd(wmi, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_chan_cmd_send() - WMI set channel cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold channel param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_chan_cmd_send(void *wmi_hdl, |
| struct channel_param *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_set_chan_cmd) |
| return wmi_handle->ops->send_pdev_set_chan_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_ht_ie_cmd_send() - WMI set channel cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold channel param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_ht_ie_cmd_send(void *wmi_hdl, |
| struct ht_ie_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ht_ie_cmd) |
| return wmi_handle->ops->send_set_ht_ie_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_vht_ie_cmd_send() - WMI set channel cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold channel param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_vht_ie_cmd_send(void *wmi_hdl, |
| struct vht_ie_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_vht_ie_cmd) |
| return wmi_handle->ops->send_set_vht_ie_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_wmm_update_cmd_send() - WMI wmm update cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold wmm param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_wmm_update_cmd_send(void *wmi_hdl, |
| struct wmm_update_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_wmm_update_cmd) |
| return wmi_handle->ops->send_wmm_update_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_ant_switch_tbl_cmd_send() - WMI ant switch tbl cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold ant switch tbl param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_ant_switch_tbl_cmd_send(void *wmi_hdl, |
| struct ant_switch_tbl_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ant_switch_tbl_cmd) |
| return wmi_handle->ops->send_set_ant_switch_tbl_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_ratepwr_table_cmd_send() - WMI ratepwr table cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold ratepwr table param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_ratepwr_table_cmd_send(void *wmi_hdl, |
| struct ratepwr_table_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ratepwr_table_cmd) |
| return wmi_handle->ops->send_set_ratepwr_table_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_get_ratepwr_table_cmd_send() - WMI ratepwr table cmd function |
| * @param wmi_handle : handle to WMI. |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_get_ratepwr_table_cmd_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_get_ratepwr_table_cmd) |
| return wmi_handle->ops->send_get_ratepwr_table_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_ctl_table_cmd_send() - WMI ctl table cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold ctl table param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_ctl_table_cmd_send(void *wmi_hdl, |
| struct ctl_table_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ctl_table_cmd) |
| return wmi_handle->ops->send_set_ctl_table_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_mimogain_table_cmd_send() - WMI set mimogain cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold mimogain param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_mimogain_table_cmd_send(void *wmi_hdl, |
| struct mimogain_table_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_mimogain_table_cmd) |
| return wmi_handle->ops->send_set_mimogain_table_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_ratepwr_chainmsk_cmd_send() - WMI ratepwr |
| * chainmsk cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold ratepwr chainmsk param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_ratepwr_chainmsk_cmd_send(void *wmi_hdl, |
| struct ratepwr_chainmsk_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_set_ratepwr_chainmsk_cmd) |
| return wmi->ops->send_set_ratepwr_chainmsk_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_macaddr_cmd_send() - WMI set macaddr cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold macaddr param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_macaddr_cmd_send(void *wmi_hdl, |
| struct macaddr_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_macaddr_cmd) |
| return wmi_handle->ops->send_set_macaddr_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_scan_start_cmd_send() - WMI pdev scan start cmd function |
| * @param wmi_handle : handle to WMI. |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pdev_scan_start_cmd_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_scan_start_cmd) |
| return wmi_handle->ops->send_pdev_scan_start_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_scan_end_cmd_send() - WMI pdev scan end cmd function |
| * @param wmi_handle : handle to WMI. |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pdev_scan_end_cmd_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_scan_end_cmd) |
| return wmi_handle->ops->send_pdev_scan_end_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_acparams_cmd_send() - WMI set acparams cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold acparams param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_acparams_cmd_send(void *wmi_hdl, |
| struct acparams_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_acparams_cmd) |
| return wmi_handle->ops->send_set_acparams_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_vap_dscp_tid_map_cmd_send() - WMI set vap dscp |
| * tid map cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold dscp param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_vap_dscp_tid_map_cmd_send(void *wmi_hdl, |
| struct vap_dscp_tid_map_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_set_vap_dscp_tid_map_cmd) |
| return wmi->ops->send_set_vap_dscp_tid_map_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_proxy_ast_reserve_cmd_send() - WMI proxy ast |
| * reserve cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold ast param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_proxy_ast_reserve_cmd_send(void *wmi_hdl, |
| struct proxy_ast_reserve_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_proxy_ast_reserve_cmd) |
| return wmi_handle->ops->send_proxy_ast_reserve_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_qvit_cmd_send() - WMI pdev qvit cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold qvit param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pdev_qvit_cmd_send(void *wmi_hdl, |
| struct pdev_qvit_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_qvit_cmd) |
| return wmi_handle->ops->send_pdev_qvit_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_mcast_group_update_cmd_send() - WMI mcast grp update cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold mcast grp param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_mcast_group_update_cmd_send(void *wmi_hdl, |
| struct mcast_group_update_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_mcast_group_update_cmd) |
| return wmi_handle->ops->send_mcast_group_update_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_peer_add_wds_entry_cmd_send() - WMI add wds entry cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold wds entry param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_peer_add_wds_entry_cmd_send(void *wmi_hdl, |
| struct peer_add_wds_entry_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_peer_add_wds_entry_cmd) |
| return wmi_handle->ops->send_peer_add_wds_entry_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_peer_del_wds_entry_cmd_send() - WMI del wds entry cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold wds entry param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_peer_del_wds_entry_cmd_send(void *wmi_hdl, |
| struct peer_del_wds_entry_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_peer_del_wds_entry_cmd) |
| return wmi_handle->ops->send_peer_del_wds_entry_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_peer_update_wds_entry_cmd_send() - WMI update wds entry cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold wds entry param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_peer_update_wds_entry_cmd_send(void *wmi_hdl, |
| struct peer_update_wds_entry_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_peer_update_wds_entry_cmd) |
| return wmi->ops->send_peer_update_wds_entry_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_phyerr_enable_cmd_send() - WMI phyerr enable cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold phyerr enable param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_phyerr_enable_cmd_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_phyerr_enable_cmd) |
| return wmi_handle->ops->send_phyerr_enable_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_phyerr_disable_cmd_send() - WMI phyerr disable cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold phyerr disable param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_phyerr_disable_cmd_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_phyerr_disable_cmd) |
| return wmi_handle->ops->send_phyerr_disable_cmd(wmi_handle); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_smart_ant_enable_cmd_send() - WMI smart ant enable function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold antenna param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_smart_ant_enable_cmd_send(void *wmi_hdl, |
| struct smart_ant_enable_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_smart_ant_enable_cmd) |
| return wmi_handle->ops->send_smart_ant_enable_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_smart_ant_set_rx_ant_cmd_send() - WMI set rx antenna function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold antenna param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_smart_ant_set_rx_ant_cmd_send(void *wmi_hdl, |
| struct smart_ant_rx_ant_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_smart_ant_set_rx_ant_cmd) |
| return wmi->ops->send_smart_ant_set_rx_ant_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_smart_ant_set_tx_ant_cmd_send() - WMI set tx antenna function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold antenna param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_smart_ant_set_tx_ant_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct smart_ant_tx_ant_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_smart_ant_set_tx_ant_cmd) |
| return wmi->ops->send_smart_ant_set_tx_ant_cmd(wmi, macaddr, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_smart_ant_set_training_info_cmd_send() - WMI set tx antenna function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold antenna param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_smart_ant_set_training_info_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct smart_ant_training_info_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_smart_ant_set_training_info_cmd) |
| return wmi->ops->send_smart_ant_set_training_info_cmd(wmi, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_smart_ant_node_config_cmd_send() - WMI set node config function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold node parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_smart_ant_node_config_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct smart_ant_node_config_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_smart_ant_set_node_config_cmd) |
| return wmi->ops->send_smart_ant_set_node_config_cmd(wmi, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_smart_ant_enable_tx_feedback_cmd_send() - WMI set tx antenna function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold antenna param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_smart_ant_enable_tx_feedback_cmd_send(void *wmi_hdl, |
| struct smart_ant_enable_tx_feedback_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_smart_ant_enable_tx_feedback_cmd) |
| return wmi->ops->send_smart_ant_enable_tx_feedback_cmd(wmi, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_spectral_configure_cmd_send() - WMI set spectral config function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold spectral config param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_spectral_configure_cmd_send(void *wmi_hdl, |
| struct vdev_spectral_configure_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_vdev_spectral_configure_cmd) |
| return wmi->ops->send_vdev_spectral_configure_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_spectral_enable_cmd_send() - WMI enable spectral function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold enable spectral param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_spectral_enable_cmd_send(void *wmi_hdl, |
| struct vdev_spectral_enable_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_vdev_spectral_enable_cmd) |
| return wmi->ops->send_vdev_spectral_enable_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_bss_chan_info_request_cmd_send() - WMI bss chan info request function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold chan info param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_bss_chan_info_request_cmd_send(void *wmi_hdl, |
| struct bss_chan_info_request_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_bss_chan_info_request_cmd) |
| return wmi->ops->send_bss_chan_info_request_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_thermal_mitigation_param_cmd_send() - WMI thermal mitigation function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold thermal mitigation param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_thermal_mitigation_param_cmd_send(void *wmi_hdl, |
| struct thermal_mitigation_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_thermal_mitigation_param_cmd) |
| return wmi->ops->send_thermal_mitigation_param_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_set_neighbour_rx_cmd_send() - WMI set neighbour rx function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold neighbour rx parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_set_neighbour_rx_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct set_neighbour_rx_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_vdev_set_neighbour_rx_cmd) |
| return wmi->ops->send_vdev_set_neighbour_rx_cmd(wmi, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_set_fwtest_param_cmd_send() - WMI set fwtest function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold fwtest param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_set_fwtest_param_cmd_send(void *wmi_hdl, |
| struct set_fwtest_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_vdev_set_fwtest_param_cmd) |
| return wmi->ops->send_vdev_set_fwtest_param_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_config_ratemask_cmd_send() - WMI config ratemask function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold config ratemask param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_config_ratemask_cmd_send(void *wmi_hdl, |
| struct config_ratemask_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_vdev_config_ratemask_cmd) |
| return wmi->ops->send_vdev_config_ratemask_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_vdev_install_key_cmd_send() - WMI install key function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold key parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_vdev_install_key_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct vdev_install_key_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_vdev_install_key_cmd) |
| return wmi_handle->ops->send_vdev_install_key_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_pdev_set_regdomain_params_cmd_send() - WMI set regdomain function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold regdomain param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_pdev_set_regdomain_cmd_send(void *wmi_hdl, |
| struct pdev_set_regdomain_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_pdev_set_regdomain_cmd) |
| return wmi_handle->ops->send_pdev_set_regdomain_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_quiet_mode_cmd_send() - WMI set quiet mode function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold quiet mode param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_quiet_mode_cmd_send(void *wmi_hdl, |
| struct set_quiet_mode_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_quiet_mode_cmd) |
| return wmi_handle->ops->send_set_quiet_mode_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_beacon_filter_cmd_send() - WMI set beacon filter function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold beacon filter param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_beacon_filter_cmd_send(void *wmi_hdl, |
| struct set_beacon_filter_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_beacon_filter_cmd) |
| return wmi_handle->ops->send_set_beacon_filter_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_remove_beacon_filter_cmd_send() - WMI set beacon filter function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold beacon filter param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_remove_beacon_filter_cmd_send(void *wmi_hdl, |
| struct remove_beacon_filter_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_remove_beacon_filter_cmd) |
| return wmi->ops->send_remove_beacon_filter_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_mgmt_cmd_send() - WMI mgmt cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold mgmt parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| #if 0 |
| QDF_STATUS wmi_unified_mgmt_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct mgmt_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_mgmt_cmd) |
| return wmi_handle->ops->send_mgmt_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| #endif |
| |
| /** |
| * wmi_unified_addba_clearresponse_cmd_send() - WMI addba resp cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold addba resp parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_addba_clearresponse_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct addba_clearresponse_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_addba_clearresponse_cmd) |
| return wmi_handle->ops->send_addba_clearresponse_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_addba_send_cmd_send() - WMI addba send function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold addba parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_addba_send_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct addba_send_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_addba_send_cmd) |
| return wmi_handle->ops->send_addba_send_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_delba_send_cmd_send() - WMI delba cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold delba parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_delba_send_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct delba_send_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_delba_send_cmd) |
| return wmi_handle->ops->send_delba_send_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_addba_setresponse_cmd_send() - WMI addba set resp cmd function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold addba set resp parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_addba_setresponse_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct addba_setresponse_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_addba_setresponse_cmd) |
| return wmi_handle->ops->send_addba_setresponse_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_singleamsdu_cmd_send() - WMI singleamsdu function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold singleamsdu parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_singleamsdu_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct singleamsdu_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_singleamsdu_cmd) |
| return wmi_handle->ops->send_singleamsdu_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_qboost_param_cmd_send() - WMI set_qboost function |
| * @param wmi_handle : handle to WMI. |
| * @param macaddr : MAC address |
| * @param param : pointer to hold set_qboost parameter |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_qboost_param_cmd_send(void *wmi_hdl, |
| uint8_t macaddr[IEEE80211_ADDR_LEN], |
| struct set_qboost_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_qboost_param_cmd) |
| return wmi_handle->ops->send_set_qboost_param_cmd(wmi_handle, |
| macaddr, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_mu_scan_cmd_send() - WMI set mu scan function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold mu scan param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_mu_scan_cmd_send(void *wmi_hdl, |
| struct mu_scan_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_mu_scan_cmd) |
| return wmi_handle->ops->send_mu_scan_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_lteu_config_cmd_send() - WMI set mu scan function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold mu scan param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lteu_config_cmd_send(void *wmi_hdl, |
| struct lteu_config_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lteu_config_cmd) |
| return wmi_handle->ops->send_lteu_config_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_set_psmode_cmd_send() - WMI set mu scan function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold mu scan param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_set_psmode_cmd_send(void *wmi_hdl, |
| struct set_ps_mode_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_ps_mode_cmd) |
| return wmi_handle->ops->send_set_ps_mode_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_init_cmd_send() - send initialization cmd to fw |
| * @wmi_handle: wmi handle |
| * @param tgt_res_cfg: pointer to target resource configuration |
| * @param num_mem_chunks: Number of memory chunks |
| * @param mem_chunks: pointer to target memory chunks |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_init_cmd_send(void *wmi_hdl, |
| target_resource_config *res_cfg, uint8_t num_mem_chunks, |
| struct wmi_host_mem_chunk *mem_chunk) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->init_cmd_send) |
| return wmi_handle->ops->init_cmd_send(wmi_handle, res_cfg, |
| num_mem_chunks, mem_chunk); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_save_service_bitmap() - save service bitmap |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_save_service_bitmap(void *wmi_hdl, void *evt_buf) |
| { |
| struct wmi_unified *wmi_handle = (struct wmi_unified *) wmi_hdl; |
| |
| if (wmi_handle->ops->save_service_bitmap) { |
| wmi_handle->ops->save_service_bitmap(wmi_handle, evt_buf); |
| return 0; |
| } |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_save_fw_version() - Save fw version |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_save_fw_version(void *wmi_hdl, void *evt_buf) |
| { |
| struct wmi_unified *wmi_handle = (struct wmi_unified *) wmi_hdl; |
| |
| if (wmi_handle->ops->save_fw_version) { |
| wmi_handle->ops->save_fw_version(wmi_handle, evt_buf); |
| return 0; |
| } |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_check_and_update_fw_version() - Ready and fw version check |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_check_and_update_fw_version(void *wmi_hdl, void *evt_buf) |
| { |
| struct wmi_unified *wmi_handle = (struct wmi_unified *) wmi_hdl; |
| |
| if (wmi_handle->ops->check_and_update_fw_version) |
| return wmi_handle->ops->check_and_update_fw_version(wmi_handle, |
| evt_buf); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_service_enabled() - Check if service enabled |
| * @param wmi_handle: wmi handle |
| * @param service_id: service identifier |
| * |
| * Return: 1 enabled, 0 disabled |
| */ |
| #ifdef WMI_NON_TLV_SUPPORT |
| bool wmi_service_enabled(void *wmi_hdl, uint32_t service_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if ((service_id < wmi_services_max) && |
| (wmi_handle->services[service_id] != WMI_SERVICE_UNAVAILABLE)) { |
| if (wmi_handle->ops->is_service_enabled) { |
| return wmi_handle->ops->is_service_enabled(wmi_handle, |
| wmi_handle->services[service_id]); |
| } |
| } else { |
| qdf_print("Support not added yet for Service %d\n", service_id); |
| } |
| return false; |
| } |
| #endif |
| |
| /** |
| * wmi_get_target_cap_from_service_ready() - extract service ready event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to received event buffer |
| * @param ev: pointer to hold target capability information extracted from even |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_get_target_cap_from_service_ready(void *wmi_hdl, |
| void *evt_buf, target_capability_info *ev) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->get_target_cap_from_service_ready) |
| return wmi->ops->get_target_cap_from_service_ready(wmi, |
| evt_buf, ev); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_fw_version() - extract fw version |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param fw_ver: Pointer to hold fw version |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_fw_version(void *wmi_hdl, |
| void *evt_buf, struct wmi_host_fw_ver *fw_ver) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_fw_version) |
| return wmi_handle->ops->extract_fw_version(wmi_handle, |
| evt_buf, fw_ver); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_fw_abi_version() - extract fw abi version |
| * @wmi_handle: wmi handle |
| * @param evt_buf: Pointer to event buffer |
| * @param fw_ver: Pointer to hold fw abi version |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_fw_abi_version(void *wmi_hdl, |
| void *evt_buf, struct wmi_host_fw_abi_ver *fw_ver) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_fw_abi_version) |
| return wmi_handle->ops->extract_fw_abi_version(wmi_handle, |
| evt_buf, fw_ver); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_hal_reg_cap() - extract HAL registered capabilities |
| * @wmi_handle: wmi handle |
| * @param evt_buf: Pointer to event buffer |
| * @param hal_reg_cap: pointer to hold HAL reg capabilities |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_hal_reg_cap(void *wmi_hdl, void *evt_buf, |
| TARGET_HAL_REG_CAPABILITIES *hal_reg_cap) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_hal_reg_cap) |
| return wmi_handle->ops->extract_hal_reg_cap(wmi_handle, |
| evt_buf, hal_reg_cap); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_host_mem_req_from_service_ready() - Extract host memory |
| * request event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param num_entries: pointer to hold number of entries requested |
| * |
| * Return: Number of entries requested |
| */ |
| host_mem_req *wmi_extract_host_mem_req_from_service_ready(void *wmi_hdl, |
| void *evt_buf, uint8_t *num_entries) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_host_mem_req) |
| return wmi_handle->ops->extract_host_mem_req(wmi_handle, |
| evt_buf, num_entries); |
| |
| *num_entries = 0; |
| return NULL; |
| } |
| |
| /** |
| * wmi_ready_extract_init_status() - Extract init status from ready event |
| * @wmi_handle: wmi handle |
| * @param ev: Pointer to event buffer |
| * |
| * Return: ready status |
| */ |
| uint32_t wmi_ready_extract_init_status(void *wmi_hdl, void *ev) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->ready_extract_init_status) |
| return wmi_handle->ops->ready_extract_init_status(wmi_handle, |
| ev); |
| |
| |
| return 1; |
| |
| } |
| |
| /** |
| * wmi_ready_extract_mac_addr() - extract mac address from ready event |
| * @wmi_handle: wmi handle |
| * @param ev: pointer to event buffer |
| * @param macaddr: Pointer to hold MAC address |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_ready_extract_mac_addr(void *wmi_hdl, void *ev, uint8_t *macaddr) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->ready_extract_mac_addr) |
| return wmi_handle->ops->ready_extract_mac_addr(wmi_handle, |
| ev, macaddr); |
| |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_dbglog_data_len() - extract debuglog data length |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param len: length of buffer |
| * |
| * Return: length |
| */ |
| uint8_t *wmi_extract_dbglog_data_len(void *wmi_hdl, void *evt_buf, |
| uint16_t *len) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_dbglog_data_len) |
| return wmi_handle->ops->extract_dbglog_data_len(wmi_handle, |
| evt_buf, len); |
| |
| |
| return NULL; |
| } |
| |
| /** |
| * wmi_send_ext_resource_config() - send extended resource configuration |
| * @wmi_handle: wmi handle |
| * @param ext_cfg: pointer to extended resource configuration |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_send_ext_resource_config(void *wmi_hdl, |
| wmi_host_ext_resource_config *ext_cfg) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_ext_resource_config) |
| return wmi_handle->ops->send_ext_resource_config(wmi_handle, |
| ext_cfg); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_nf_dbr_dbm_info_get_cmd_send() - WMI request nf info function |
| * @param wmi_handle : handle to WMI. |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_nf_dbr_dbm_info_get_cmd_send(void *wmi_hdl) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_nf_dbr_dbm_info_get_cmd) |
| return wmi->ops->send_nf_dbr_dbm_info_get_cmd(wmi); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_packet_power_info_get_cmd_send() - WMI get packet power info function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold packet power info param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_packet_power_info_get_cmd_send(void *wmi_hdl, |
| struct packet_power_info_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_packet_power_info_get_cmd) |
| return wmi->ops->send_packet_power_info_get_cmd(wmi, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_gpio_config_cmd_send() - WMI gpio config function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold gpio config param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_gpio_config_cmd_send(void *wmi_hdl, |
| struct gpio_config_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_gpio_config_cmd) |
| return wmi_handle->ops->send_gpio_config_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_gpio_output_cmd_send() - WMI gpio config function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold gpio config param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_gpio_output_cmd_send(void *wmi_hdl, |
| struct gpio_output_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_gpio_output_cmd) |
| return wmi_handle->ops->send_gpio_output_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_rtt_meas_req_test_cmd_send() - WMI rtt meas req test function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold rtt meas req test param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_rtt_meas_req_test_cmd_send(void *wmi_hdl, |
| struct rtt_meas_req_test_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_rtt_meas_req_test_cmd) |
| return wmi_handle->ops->send_rtt_meas_req_test_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_rtt_meas_req_cmd_send() - WMI rtt meas req function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold rtt meas req param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_rtt_meas_req_cmd_send(void *wmi_hdl, |
| struct rtt_meas_req_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_rtt_meas_req_cmd) |
| return wmi_handle->ops->send_rtt_meas_req_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_lci_set_cmd_send() - WMI lci set function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold lci param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lci_set_cmd_send(void *wmi_hdl, |
| struct lci_set_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lci_set_cmd) |
| return wmi_handle->ops->send_lci_set_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_lcr_set_cmd_send() - WMI lcr set function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold lcr param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_lcr_set_cmd_send(void *wmi_hdl, |
| struct lcr_set_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_lcr_set_cmd) |
| return wmi_handle->ops->send_lcr_set_cmd(wmi_handle, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_rtt_keepalive_req_cmd_send() - WMI rtt meas req test function |
| * @param wmi_handle : handle to WMI. |
| * @param param : pointer to hold rtt meas req test param |
| * |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_rtt_keepalive_req_cmd_send(void *wmi_hdl, |
| struct rtt_keepalive_req_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_rtt_keepalive_req_cmd) |
| return wmi_handle->ops->send_rtt_keepalive_req_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_send_periodic_chan_stats_config_cmd() - send periodic chan stats cmd |
| * to fw |
| * @wmi_handle: wmi handle |
| * @param: pointer to hold periodic chan stats param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_unified_send_periodic_chan_stats_config_cmd(void *wmi_hdl, |
| struct periodic_chan_stats_params *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->send_periodic_chan_stats_config_cmd) |
| return wmi->ops->send_periodic_chan_stats_config_cmd(wmi, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_send_atf_peer_request_cmd() - send atf peer request command to fw |
| * @wmi_handle: wmi handle |
| * @param: pointer to atf peer request param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS |
| wmi_send_atf_peer_request_cmd(void *wmi_hdl, |
| struct atf_peer_request_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_atf_peer_request_cmd) |
| return wmi_handle->ops->send_atf_peer_request_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_send_set_atf_grouping_cmd() - send set atf grouping command to fw |
| * @wmi_handle: wmi handle |
| * @param: pointer to set atf grouping param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS |
| wmi_send_set_atf_grouping_cmd(void *wmi_hdl, |
| struct atf_grouping_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_set_atf_grouping_cmd) |
| return wmi_handle->ops->send_set_atf_grouping_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| |
| /* Extract - APIs */ |
| /** |
| * wmi_extract_wds_addr_event - Extract WDS addr WMI event |
| * |
| * @param wmi_handle : handle to WMI. |
| * @param evt_buf : pointer to event buffer |
| * @param len : length of the event buffer |
| * @param wds_ev: pointer to strct to extract |
| * @return QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_wds_addr_event(void *wmi_hdl, void *evt_buf, |
| uint16_t len, wds_addr_event_t *wds_ev) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_wds_addr_event) { |
| return wmi_handle->ops->extract_wds_addr_event(wmi_handle, |
| evt_buf, len, wds_ev); |
| } |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_dcs_interference_type() - extract dcs interference type |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param interference_type: Pointer to hold interference type |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_dcs_interference_type(void *wmi_hdl, |
| void *evt_buf, uint32_t *interference_type) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_dcs_interference_type) { |
| return wmi->ops->extract_dcs_interference_type(wmi, |
| evt_buf, interference_type); |
| } |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /* |
| * wmi_extract_dcs_cw_int() - extract dcs cw interference from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param cw_int: Pointer to hold cw interference |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_dcs_cw_int(void *wmi_hdl, void *evt_buf, |
| wmi_host_ath_dcs_cw_int *cw_int) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_dcs_cw_int) { |
| return wmi_handle->ops->extract_dcs_cw_int(wmi_handle, |
| evt_buf, cw_int); |
| } |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_dcs_im_tgt_stats() - extract dcs im target stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param wlan_stat: Pointer to hold wlan stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_dcs_im_tgt_stats(void *wmi_hdl, void *evt_buf, |
| wmi_host_dcs_im_tgt_stats_t *wlan_stat) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_dcs_im_tgt_stats) { |
| return wmi_handle->ops->extract_dcs_im_tgt_stats(wmi_handle, |
| evt_buf, wlan_stat); |
| } |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_fips_event_error_status() - extract fips event error status |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param err_status: Pointer to hold error status |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_fips_event_error_status(void *wmi_hdl, void *evt_buf, |
| uint32_t *err_status) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_fips_event_error_status) { |
| return wmi->ops->extract_fips_event_error_status(wmi, |
| evt_buf, err_status); |
| } |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_fips_event_data() - extract fips event data |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param data_len: Pointer to hold fips data length |
| * @param data: Double pointer to hold fips data |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_fips_event_data(void *wmi_hdl, void *evt_buf, |
| uint32_t *data_len, uint32_t **data) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_fips_event_data) { |
| return wmi_handle->ops->extract_fips_event_data(wmi_handle, |
| evt_buf, data_len, data); |
| } |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_vdev_start_resp() - extract vdev start response |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param vdev_rsp: Pointer to hold vdev response |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_vdev_start_resp(void *wmi_hdl, void *evt_buf, |
| wmi_host_vdev_start_resp *vdev_rsp) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_vdev_start_resp) |
| return wmi_handle->ops->extract_vdev_start_resp(wmi_handle, |
| evt_buf, vdev_rsp); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_tbttoffset_update_params() - extract tbtt offset update param |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param vdev_map: Pointer to hold vdev map |
| * @param tbttoffset_list: Pointer to tbtt offset list |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_tbttoffset_update_params(void *wmi_hdl, void *evt_buf, |
| uint32_t *vdev_map, uint32_t **tbttoffset_list) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_tbttoffset_update_params) |
| return wmi->ops->extract_tbttoffset_update_params(wmi, |
| evt_buf, vdev_map, tbttoffset_list); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_mgmt_rx_params() - extract management rx params from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param hdr: Pointer to hold header |
| * @param bufp: Pointer to hold pointer to rx param buffer |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_mgmt_rx_params(void *wmi_hdl, void *evt_buf, |
| wmi_host_mgmt_rx_hdr *hdr, uint8_t **bufp) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_mgmt_rx_params) |
| return wmi_handle->ops->extract_mgmt_rx_params(wmi_handle, |
| evt_buf, hdr, bufp); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_vdev_stopped_param() - extract vdev stop param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param vdev_id: Pointer to hold vdev identifier |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_vdev_stopped_param(void *wmi_hdl, void *evt_buf, |
| uint32_t *vdev_id) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_vdev_stopped_param) |
| return wmi_handle->ops->extract_vdev_stopped_param(wmi_handle, |
| evt_buf, vdev_id); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_vdev_roam_param() - extract vdev roam param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to hold roam param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_vdev_roam_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_roam_event *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_vdev_roam_param) |
| return wmi_handle->ops->extract_vdev_roam_param(wmi_handle, |
| evt_buf, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_vdev_scan_ev_param() - extract vdev scan param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to hold vdev scan param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_vdev_scan_ev_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_scan_event *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_vdev_scan_ev_param) |
| return wmi_handle->ops->extract_vdev_scan_ev_param(wmi_handle, |
| evt_buf, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_mu_ev_param() - extract mu param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to hold mu report |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_mu_ev_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_mu_report_event *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_mu_ev_param) |
| return wmi_handle->ops->extract_mu_ev_param(wmi_handle, evt_buf, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_pdev_tpc_config_ev_param() - extract pdev tpc configuration |
| * param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to hold tpc configuration |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_pdev_tpc_config_ev_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_pdev_tpc_config_event *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_pdev_tpc_config_ev_param) |
| return wmi->ops->extract_pdev_tpc_config_ev_param(wmi, |
| evt_buf, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_gpio_input_ev_param() - extract gpio input param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param gpio_num: Pointer to hold gpio number |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_gpio_input_ev_param(void *wmi_hdl, |
| void *evt_buf, uint32_t *gpio_num) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_gpio_input_ev_param) |
| return wmi_handle->ops->extract_gpio_input_ev_param(wmi_handle, |
| evt_buf, gpio_num); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_pdev_reserve_ast_ev_param() - extract reserve ast entry |
| * param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param result: Pointer to hold reserve ast entry param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_pdev_reserve_ast_ev_param(void *wmi_hdl, |
| void *evt_buf, uint32_t *result) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_pdev_reserve_ast_ev_param) |
| return wmi->ops->extract_pdev_reserve_ast_ev_param(wmi, |
| evt_buf, result); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_nfcal_power_ev_param() - extract noise floor calibration |
| * power param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to hold nf cal power param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_nfcal_power_ev_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_pdev_nfcal_power_all_channels_event *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_nfcal_power_ev_param) |
| return wmi_handle->ops->extract_nfcal_power_ev_param(wmi_handle, |
| evt_buf, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_pdev_tpc_ev_param() - extract tpc param from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to hold tpc param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_pdev_tpc_ev_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_pdev_tpc_event *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_pdev_tpc_ev_param) |
| return wmi_handle->ops->extract_pdev_tpc_ev_param(wmi_handle, |
| evt_buf, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_pdev_generic_buffer_ev_param() - extract pdev generic buffer |
| * from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to generic buffer param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_pdev_generic_buffer_ev_param(void *wmi_hdl, |
| void *evt_buf, wmi_host_pdev_generic_buffer_event *param) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_pdev_generic_buffer_ev_param) |
| return wmi->ops->extract_pdev_generic_buffer_ev_param(wmi, |
| evt_buf, param); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_mgmt_tx_compl_param() - extract mgmt tx completion param |
| * from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param param: Pointer to mgmt tx completion param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_mgmt_tx_compl_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_mgmt_tx_compl_event *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_mgmt_tx_compl_param) |
| return wmi_handle->ops->extract_mgmt_tx_compl_param(wmi_handle, |
| evt_buf, param); |
| |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_swba_vdev_map() - extract swba vdev map from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param vdev_map: Pointer to hold vdev map |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_swba_vdev_map(void *wmi_hdl, void *evt_buf, |
| uint32_t *vdev_map) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_swba_vdev_map) |
| return wmi_handle->ops->extract_swba_vdev_map(wmi_handle, |
| evt_buf, vdev_map); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_swba_tim_info() - extract swba tim info from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param idx: Index to bcn info |
| * @param tim_info: Pointer to hold tim info |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_swba_tim_info(void *wmi_hdl, void *evt_buf, |
| uint32_t idx, wmi_host_tim_info *tim_info) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_swba_tim_info) |
| return wmi_handle->ops->extract_swba_tim_info(wmi_handle, |
| evt_buf, idx, tim_info); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_swba_noa_info() - extract swba NoA information from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param idx: Index to bcn info |
| * @param p2p_desc: Pointer to hold p2p NoA info |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_swba_noa_info(void *wmi_hdl, void *evt_buf, |
| uint32_t idx, wmi_host_p2p_noa_info *p2p_desc) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_swba_noa_info) |
| return wmi_handle->ops->extract_swba_noa_info(wmi_handle, |
| evt_buf, idx, p2p_desc); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_peer_sta_ps_statechange_ev() - extract peer sta ps state |
| * from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param ev: Pointer to hold peer param and ps state |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_peer_sta_ps_statechange_ev(void *wmi_hdl, void *evt_buf, |
| wmi_host_peer_sta_ps_statechange_event *ev) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_peer_sta_ps_statechange_ev) |
| return wmi->ops->extract_peer_sta_ps_statechange_ev(wmi, |
| evt_buf, ev); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_peer_sta_kickout_ev() - extract peer sta kickout event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param ev: Pointer to hold peer param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_peer_sta_kickout_ev(void *wmi_hdl, void *evt_buf, |
| wmi_host_peer_sta_kickout_event *ev) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_peer_sta_kickout_ev) |
| return wmi_handle->ops->extract_peer_sta_kickout_ev(wmi_handle, |
| evt_buf, ev); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_peer_ratecode_list_ev() - extract peer ratecode from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param peer_mac: Pointer to hold peer mac address |
| * @param rate_cap: Pointer to hold ratecode |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_peer_ratecode_list_ev(void *wmi_hdl, void *evt_buf, |
| uint8_t *peer_mac, wmi_sa_rate_cap *rate_cap) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_peer_ratecode_list_ev) |
| return wmi->ops->extract_peer_ratecode_list_ev(wmi, |
| evt_buf, peer_mac, rate_cap); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_comb_phyerr() - extract comb phy error from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param datalen: data length of event buffer |
| * @param buf_offset: Pointer to hold value of current event buffer offset |
| * post extraction |
| * @param phyer: Pointer to hold phyerr |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_comb_phyerr(void *wmi_hdl, void *evt_buf, |
| uint16_t datalen, uint16_t *buf_offset, wmi_host_phyerr_t *phyerr) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_comb_phyerr) |
| return wmi_handle->ops->extract_comb_phyerr(wmi_handle, |
| evt_buf, datalen, buf_offset, phyerr); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_single_phyerr() - extract single phy error from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param datalen: data length of event buffer |
| * @param buf_offset: Pointer to hold value of current event buffer offset |
| * post extraction |
| * @param phyerr: Pointer to hold phyerr |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_single_phyerr(void *wmi_hdl, void *evt_buf, |
| uint16_t datalen, uint16_t *buf_offset, wmi_host_phyerr_t *phyerr) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_single_phyerr) |
| return wmi_handle->ops->extract_single_phyerr(wmi_handle, |
| evt_buf, datalen, buf_offset, phyerr); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_composite_phyerr() - extract composite phy error from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param datalen: Length of event buffer |
| * @param phyerr: Pointer to hold phy error |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_composite_phyerr(void *wmi_hdl, void *evt_buf, |
| uint16_t datalen, wmi_host_phyerr_t *phyerr) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_composite_phyerr) |
| return wmi_handle->ops->extract_composite_phyerr(wmi_handle, |
| evt_buf, datalen, phyerr); |
| |
| return QDF_STATUS_E_FAILURE; |
| |
| } |
| |
| /** |
| * wmi_extract_stats_param() - extract all stats count from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param stats_param: Pointer to hold stats count |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_stats_param(void *wmi_hdl, void *evt_buf, |
| wmi_host_stats_event *stats_param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_all_stats_count) |
| return wmi_handle->ops->extract_all_stats_count(wmi_handle, |
| evt_buf, stats_param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_pdev_stats() - extract pdev stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into pdev stats |
| * @param pdev_stats: Pointer to hold pdev stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_pdev_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_pdev_stats *pdev_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_pdev_stats) |
| return wmi_handle->ops->extract_pdev_stats(wmi_handle, |
| evt_buf, index, pdev_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_pdev_ext_stats() - extract extended pdev stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into extended pdev stats |
| * @param pdev_ext_stats: Pointer to hold extended pdev stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_pdev_ext_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_pdev_ext_stats *pdev_ext_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_pdev_ext_stats) |
| return wmi_handle->ops->extract_pdev_ext_stats(wmi_handle, |
| evt_buf, index, pdev_ext_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_peer_stats() - extract peer stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into peer stats |
| * @param peer_stats: Pointer to hold peer stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_peer_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_peer_stats *peer_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_peer_stats) |
| return wmi_handle->ops->extract_peer_stats(wmi_handle, |
| evt_buf, index, peer_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_vdev_stats() - extract vdev stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into vdev stats |
| * @param vdev_stats: Pointer to hold vdev stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_vdev_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_vdev_stats *vdev_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_vdev_stats) |
| return wmi_handle->ops->extract_vdev_stats(wmi_handle, |
| evt_buf, index, vdev_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_rtt_hdr() - extract rtt header from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param ev: Pointer to hold rtt header |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_rtt_hdr(void *wmi_hdl, void *evt_buf, |
| wmi_host_rtt_event_hdr *ev) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_rtt_hdr) |
| return wmi_handle->ops->extract_rtt_hdr(wmi_handle, |
| evt_buf, ev); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_bcnflt_stats() - extract bcn fault stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into bcn fault stats |
| * @param bcnflt_stats: Pointer to hold bcn fault stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_bcnflt_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_bcnflt_stats *bcnflt_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_bcnflt_stats) |
| return wmi_handle->ops->extract_bcnflt_stats(wmi_handle, |
| evt_buf, index, bcnflt_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_rtt_ev() - extract rtt event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: Pointer to event buffer |
| * @param ev: Pointer to hold rtt event |
| * @param hdump: Pointer to hold hex dump |
| * @param hdump_len: hex dump length |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_rtt_ev(void *wmi_hdl, void *evt_buf, |
| wmi_host_rtt_meas_event *ev, uint8_t *hdump, uint16_t hdump_len) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_rtt_ev) |
| return wmi_handle->ops->extract_rtt_ev(wmi_handle, |
| evt_buf, ev, hdump, hdump_len); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_peer_extd_stats() - extract extended peer stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into extended peer stats |
| * @param peer_extd_stats: Pointer to hold extended peer stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_peer_extd_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_peer_extd_stats *peer_extd_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_peer_extd_stats) |
| return wmi_handle->ops->extract_peer_extd_stats(wmi_handle, |
| evt_buf, index, peer_extd_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_rtt_error_report_ev() - extract rtt error report from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param wds_ev: Pointer to hold rtt error report |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_rtt_error_report_ev(void *wmi_hdl, void *evt_buf, |
| wmi_host_rtt_error_report_event *ev) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_rtt_error_report_ev) |
| return wmi_handle->ops->extract_rtt_error_report_ev(wmi_handle, |
| evt_buf, ev); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_chan_stats() - extract chan stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into chan stats |
| * @param chanstats: Pointer to hold chan stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_chan_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_chan_stats *chan_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_chan_stats) |
| return wmi_handle->ops->extract_chan_stats(wmi_handle, |
| evt_buf, index, chan_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_thermal_stats() - extract thermal stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: Pointer to event buffer |
| * @param temp: Pointer to hold extracted temperature |
| * @param level: Pointer to hold extracted level |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_thermal_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t *temp, uint32_t *level) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_thermal_stats) |
| return wmi_handle->ops->extract_thermal_stats(wmi_handle, |
| evt_buf, temp, level); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_profile_ctx() - extract profile context from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param profile_ctx: Pointer to hold profile context |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_profile_ctx(void *wmi_hdl, void *evt_buf, |
| wmi_host_wlan_profile_ctx_t *profile_ctx) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_profile_ctx) |
| return wmi_handle->ops->extract_profile_ctx(wmi_handle, |
| evt_buf, profile_ctx); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_thermal_level_stats() - extract thermal level stats from |
| * event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param idx: Index to level stats |
| * @param levelcount: Pointer to hold levelcount |
| * @param dccount: Pointer to hold dccount |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_thermal_level_stats(void *wmi_hdl, void *evt_buf, |
| uint8_t idx, uint32_t *levelcount, uint32_t *dccount) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_thermal_level_stats) |
| return wmi_handle->ops->extract_thermal_level_stats(wmi_handle, |
| evt_buf, idx, levelcount, dccount); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_profile_data() - extract profile data from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param profile_data: Pointer to hold profile data |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_profile_data(void *wmi_hdl, void *evt_buf, |
| wmi_host_wlan_profile_t *profile_data) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_profile_data) |
| return wmi_handle->ops->extract_profile_data(wmi_handle, |
| evt_buf, profile_data); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_chan_info_event() - extract chan information from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param chan_info: Pointer to hold chan information |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_chan_info_event(void *wmi_hdl, void *evt_buf, |
| wmi_host_chan_info_event *chan_info) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_chan_info_event) |
| return wmi_handle->ops->extract_chan_info_event(wmi_handle, |
| evt_buf, chan_info); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_channel_hopping_event() - extract channel hopping param |
| * from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param ch_hopping: Pointer to hold channel hopping param |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_channel_hopping_event(void *wmi_hdl, void *evt_buf, |
| wmi_host_pdev_channel_hopping_event *ch_hopping) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_channel_hopping_event) |
| return wmi->ops->extract_channel_hopping_event(wmi, |
| evt_buf, ch_hopping); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_bss_chan_info_event() - extract bss channel information |
| * from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param bss_chan_info: Pointer to hold bss channel information |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_bss_chan_info_event(void *wmi_hdl, void *evt_buf, |
| wmi_host_pdev_bss_chan_info_event *bss_chan_info) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_bss_chan_info_event) |
| return wmi_handle->ops->extract_bss_chan_info_event(wmi_handle, |
| evt_buf, bss_chan_info); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_inst_rssi_stats_event() - extract inst rssi stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param inst_rssi_resp: Pointer to hold inst rssi response |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_inst_rssi_stats_event(void *wmi_hdl, void *evt_buf, |
| wmi_host_inst_stats_resp *inst_rssi_resp) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_inst_rssi_stats_event) |
| return wmi->ops->extract_inst_rssi_stats_event(wmi, |
| evt_buf, inst_rssi_resp); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_tx_data_traffic_ctrl_ev() - extract tx data traffic control |
| * from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into chan stats |
| * @param ev: Pointer to hold data traffic control |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_tx_data_traffic_ctrl_ev(void *wmi_hdl, void *evt_buf, |
| wmi_host_tx_data_traffic_ctrl_event *ev) |
| { |
| wmi_unified_t wmi = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi->ops->extract_tx_data_traffic_ctrl_ev) |
| return wmi->ops->extract_tx_data_traffic_ctrl_ev(wmi, |
| evt_buf, ev); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_extract_vdev_extd_stats() - extract extended vdev stats from event |
| * @wmi_handle: wmi handle |
| * @param evt_buf: pointer to event buffer |
| * @param index: Index into extended vdev stats |
| * @param vdev_extd_stats: Pointer to hold extended vdev stats |
| * |
| * Return: QDF_STATUS_SUCCESS on success and QDF_STATUS_E_FAILURE for failure |
| */ |
| QDF_STATUS wmi_extract_vdev_extd_stats(void *wmi_hdl, void *evt_buf, |
| uint32_t index, wmi_host_vdev_extd_stats *vdev_extd_stats) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->extract_vdev_extd_stats) |
| return wmi_handle->ops->extract_vdev_extd_stats(wmi_handle, |
| evt_buf, index, vdev_extd_stats); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |
| |
| /** |
| * wmi_unified_send_power_dbg_cmd() - send power debug commands |
| * @wmi_handle: wmi handle |
| * @param: wmi power debug parameter |
| * |
| * Send WMI_POWER_DEBUG_CMDID parameters to fw. |
| * |
| * Return: QDF_STATUS_SUCCESS on success, QDF_STATUS_E_** on error |
| */ |
| QDF_STATUS wmi_unified_send_power_dbg_cmd(void *wmi_hdl, |
| struct wmi_power_dbg_params *param) |
| { |
| wmi_unified_t wmi_handle = (wmi_unified_t) wmi_hdl; |
| |
| if (wmi_handle->ops->send_power_dbg_cmd) |
| return wmi_handle->ops->send_power_dbg_cmd(wmi_handle, |
| param); |
| |
| return QDF_STATUS_E_FAILURE; |
| } |