| import socket |
| import unittest |
| |
| from util import ppp |
| from framework import VppTestRunner |
| from template_ipsec import IPSecIPv4Fwd |
| |
| """ |
| When an IPSec SPD is configured on an interface, any inbound packets |
| not matching inbound policies, or outbound packets not matching outbound |
| policies, must be dropped by default as per RFC4301. |
| |
| This test uses simple IPv4 forwarding on interfaces with IPSec enabled |
| to check if packets with no matching rules are dropped by default. |
| |
| The basic setup is a single SPD bound to two interfaces, pg0 and pg1. |
| |
| ┌────┐ ┌────┐ |
| │SPD1│ │SPD1│ |
| ├────┤ ─────> ├────┤ |
| │PG0 │ │PG1 │ |
| └────┘ └────┘ |
| |
| First, both inbound and outbound BYPASS policies are configured allowing |
| traffic to pass from pg0 -> pg1. |
| |
| Packets are captured and verified at pg1. |
| |
| Then either the inbound or outbound policies are removed and we verify |
| packets are dropped as expected. |
| |
| """ |
| |
| |
| class IPSecInboundDefaultDrop(IPSecIPv4Fwd): |
| """ IPSec: inbound packets drop by default with no matching rule """ |
| def test_ipsec_inbound_default_drop(self): |
| # configure two interfaces and bind the same SPD to both |
| self.create_interfaces(2) |
| self.spd_create_and_intf_add(1, self.pg_interfaces) |
| pkt_count = 5 |
| |
| # catch-all inbound BYPASS policy, all interfaces |
| inbound_policy = self.spd_add_rem_policy( |
| 1, None, None, socket.IPPROTO_UDP, is_out=0, priority=10, |
| policy_type="bypass", all_ips=True) |
| |
| # outbound BYPASS policy allowing traffic from pg0->pg1 |
| outbound_policy = self.spd_add_rem_policy( |
| 1, self.pg0, self.pg1, socket.IPPROTO_UDP, |
| is_out=1, priority=10, policy_type="bypass") |
| |
| # create a packet stream pg0->pg1 + add to pg0 |
| packets0 = self.create_stream(self.pg0, self.pg1, pkt_count) |
| self.pg0.add_stream(packets0) |
| |
| # with inbound BYPASS rule at pg0, we expect to see forwarded |
| # packets on pg1 |
| self.pg_interfaces[1].enable_capture() |
| self.pg_start() |
| cap1 = self.pg1.get_capture() |
| for packet in cap1: |
| try: |
| self.logger.debug(ppp("SPD - Got packet:", packet)) |
| except Exception: |
| self.logger.error( |
| ppp("Unexpected or invalid packet:", packet)) |
| raise |
| self.logger.debug("SPD: Num packets: %s", len(cap1.res)) |
| # verify captures on pg1 |
| self.verify_capture(self.pg0, self.pg1, cap1) |
| # verify policies matched correct number of times |
| self.verify_policy_match(pkt_count, inbound_policy) |
| self.verify_policy_match(pkt_count, outbound_policy) |
| |
| # remove inbound catch-all BYPASS rule, traffic should now be dropped |
| self.spd_add_rem_policy( # inbound, all interfaces |
| 1, None, None, socket.IPPROTO_UDP, is_out=0, priority=10, |
| policy_type="bypass", all_ips=True, remove=True) |
| |
| # create another packet stream pg0->pg1 + add to pg0 |
| packets1 = self.create_stream(self.pg0, self.pg1, pkt_count) |
| self.pg0.add_stream(packets1) |
| self.pg_interfaces[1].enable_capture() |
| self.pg_start() |
| # confirm traffic has now been dropped |
| self.pg1.assert_nothing_captured("inbound pkts with no matching \ |
| rules NOT dropped by default") |
| # both policies should not have matched any further packets |
| # since we've dropped at input stage |
| self.verify_policy_match(pkt_count, outbound_policy) |
| self.verify_policy_match(pkt_count, inbound_policy) |
| |
| |
| class IPSecOutboundDefaultDrop(IPSecIPv4Fwd): |
| """ IPSec: outbound packets drop by default with no matching rule """ |
| def test_ipsec_inbound_default_drop(self): |
| # configure two interfaces and bind the same SPD to both |
| self.create_interfaces(2) |
| self.spd_create_and_intf_add(1, self.pg_interfaces) |
| pkt_count = 5 |
| |
| # catch-all inbound BYPASS policy, all interfaces |
| inbound_policy = self.spd_add_rem_policy( |
| 1, None, None, socket.IPPROTO_UDP, is_out=0, priority=10, |
| policy_type="bypass", all_ips=True) |
| |
| # outbound BYPASS policy allowing traffic from pg0->pg1 |
| outbound_policy = self.spd_add_rem_policy( |
| 1, self.pg0, self.pg1, socket.IPPROTO_UDP, |
| is_out=1, priority=10, policy_type="bypass") |
| |
| # create a packet stream pg0->pg1 + add to pg0 |
| packets0 = self.create_stream(self.pg0, self.pg1, pkt_count) |
| self.pg0.add_stream(packets0) |
| |
| # with outbound BYPASS rule allowing pg0->pg1, we expect to see |
| # forwarded packets on pg1 |
| self.pg_interfaces[1].enable_capture() |
| self.pg_start() |
| cap1 = self.pg1.get_capture() |
| for packet in cap1: |
| try: |
| self.logger.debug(ppp("SPD - Got packet:", packet)) |
| except Exception: |
| self.logger.error( |
| ppp("Unexpected or invalid packet:", packet)) |
| raise |
| self.logger.debug("SPD: Num packets: %s", len(cap1.res)) |
| # verify captures on pg1 |
| self.verify_capture(self.pg0, self.pg1, cap1) |
| # verify policies matched correct number of times |
| self.verify_policy_match(pkt_count, inbound_policy) |
| self.verify_policy_match(pkt_count, outbound_policy) |
| |
| # remove outbound rule |
| self.spd_add_rem_policy( |
| 1, self.pg0, self.pg1, socket.IPPROTO_UDP, |
| is_out=1, priority=10, policy_type="bypass", |
| remove=True) |
| |
| # create another packet stream pg0->pg1 + add to pg0 |
| packets1 = self.create_stream(self.pg0, self.pg1, pkt_count) |
| self.pg0.add_stream(packets1) |
| self.pg_interfaces[1].enable_capture() |
| self.pg_start() |
| # confirm traffic was dropped and not forwarded |
| self.pg1.assert_nothing_captured("outbound pkts with no matching \ |
| rules NOT dropped by default") |
| # inbound rule should have matched twice the # of pkts now |
| self.verify_policy_match(pkt_count*2, inbound_policy) |
| # as dropped at outbound, outbound policy is the same |
| self.verify_policy_match(pkt_count, outbound_policy) |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |