| /* |
| * Copyright (c) 2016 Cisco and/or its affiliates. |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * @brief Common utility functions for LISP-GPE interfaces. |
| * |
| */ |
| |
| #include <vppinfra/error.h> |
| #include <vppinfra/hash.h> |
| #include <vnet/vnet.h> |
| #include <vnet/ip/ip.h> |
| #include <vnet/udp/udp.h> |
| #include <vnet/ethernet/ethernet.h> |
| #include <vnet/lisp-gpe/lisp_gpe.h> |
| #include <vnet/lisp-gpe/lisp_gpe_fwd_entry.h> |
| #include <vnet/lisp-gpe/lisp_gpe_tenant.h> |
| #include <vnet/lisp-gpe/lisp_gpe_adjacency.h> |
| #include <vnet/adj/adj.h> |
| #include <vnet/fib/fib_table.h> |
| #include <vnet/fib/ip4_fib.h> |
| #include <vnet/fib/ip6_fib.h> |
| #include <vnet/lisp-cp/lisp_cp_dpo.h> |
| |
| /** |
| * @brief The VLIB node arc/edge from the interface's TX node, to the L2 |
| * load-balanceing node. Which is where all packets go |
| */ |
| static uword l2_arc_to_lb; |
| |
| #define foreach_lisp_gpe_tx_next \ |
| _(DROP, "error-drop") \ |
| _(IP4_LOOKUP, "ip4-lookup") \ |
| _(IP6_LOOKUP, "ip6-lookup") |
| |
| typedef enum |
| { |
| #define _(sym,str) LISP_GPE_TX_NEXT_##sym, |
| foreach_lisp_gpe_tx_next |
| #undef _ |
| LISP_GPE_TX_N_NEXT, |
| } lisp_gpe_tx_next_t; |
| |
| typedef struct |
| { |
| u32 tunnel_index; |
| } lisp_gpe_tx_trace_t; |
| |
| u8 * |
| format_lisp_gpe_tx_trace (u8 * s, va_list * args) |
| { |
| CLIB_UNUSED (vlib_main_t * vm) = va_arg (*args, vlib_main_t *); |
| CLIB_UNUSED (vlib_node_t * node) = va_arg (*args, vlib_node_t *); |
| lisp_gpe_tx_trace_t *t = va_arg (*args, lisp_gpe_tx_trace_t *); |
| |
| s = format (s, "LISP-GPE-TX: tunnel %d", t->tunnel_index); |
| return s; |
| } |
| |
| #define is_v4_packet(_h) ((*(u8*) _h) & 0xF0) == 0x40 |
| |
| /** |
| * @brief LISP-GPE interface TX (encap) function. |
| * @node lisp_gpe_interface_tx |
| * |
| * The LISP-GPE interface TX (encap) function. |
| * |
| * Looks up the associated tunnel based on the adjacency hit in the SD FIB |
| * and if the tunnel is multihomed it uses the flow hash to determine |
| * sub-tunnel, and rewrite string, to be used to encapsulate the packet. |
| * |
| * @param[in] vm vlib_main_t corresponding to the current thread. |
| * @param[in] node vlib_node_runtime_t data for this node. |
| * @param[in] frame vlib_frame_t whose contents should be dispatched. |
| * |
| * @return number of vectors in frame. |
| */ |
| static uword |
| lisp_gpe_interface_tx (vlib_main_t * vm, vlib_node_runtime_t * node, |
| vlib_frame_t * from_frame) |
| { |
| u32 n_left_from, next_index, *from, *to_next; |
| lisp_gpe_main_t *lgm = &lisp_gpe_main; |
| |
| from = vlib_frame_vector_args (from_frame); |
| n_left_from = from_frame->n_vectors; |
| |
| next_index = node->cached_next_index; |
| |
| while (n_left_from > 0) |
| { |
| u32 n_left_to_next; |
| |
| vlib_get_next_frame (vm, node, next_index, to_next, n_left_to_next); |
| |
| while (n_left_from > 0 && n_left_to_next > 0) |
| { |
| u32 bi0, adj_index0, next0; |
| const ip_adjacency_t *adj0; |
| const dpo_id_t *dpo0; |
| vlib_buffer_t *b0; |
| u8 is_v4_0; |
| |
| bi0 = from[0]; |
| to_next[0] = bi0; |
| from += 1; |
| to_next += 1; |
| n_left_from -= 1; |
| n_left_to_next -= 1; |
| |
| b0 = vlib_get_buffer (vm, bi0); |
| |
| /* Fixup the checksum and len fields in the LISP tunnel encap |
| * that was applied at the midchain node */ |
| is_v4_0 = is_v4_packet (vlib_buffer_get_current (b0)); |
| ip_udp_fixup_one (lgm->vlib_main, b0, is_v4_0); |
| |
| /* Follow the DPO on which the midchain is stacked */ |
| adj_index0 = vnet_buffer (b0)->ip.adj_index[VLIB_TX]; |
| adj0 = adj_get (adj_index0); |
| dpo0 = &adj0->sub_type.midchain.next_dpo; |
| next0 = dpo0->dpoi_next_node; |
| vnet_buffer (b0)->ip.adj_index[VLIB_TX] = dpo0->dpoi_index; |
| |
| if (PREDICT_FALSE (b0->flags & VLIB_BUFFER_IS_TRACED)) |
| { |
| lisp_gpe_tx_trace_t *tr = vlib_add_trace (vm, node, b0, |
| sizeof (*tr)); |
| tr->tunnel_index = adj_index0; |
| } |
| vlib_validate_buffer_enqueue_x1 (vm, node, next_index, to_next, |
| n_left_to_next, bi0, next0); |
| } |
| |
| vlib_put_next_frame (vm, node, next_index, n_left_to_next); |
| } |
| |
| return from_frame->n_vectors; |
| } |
| |
| static u8 * |
| format_lisp_gpe_name (u8 * s, va_list * args) |
| { |
| u32 dev_instance = va_arg (*args, u32); |
| return format (s, "lisp_gpe%d", dev_instance); |
| } |
| |
| /* *INDENT-OFF* */ |
| VNET_DEVICE_CLASS (lisp_gpe_device_class) = { |
| .name = "LISP_GPE", |
| .format_device_name = format_lisp_gpe_name, |
| .format_tx_trace = format_lisp_gpe_tx_trace, |
| .tx_function = lisp_gpe_interface_tx, |
| }; |
| /* *INDENT-ON* */ |
| |
| u8 * |
| format_lisp_gpe_header_with_length (u8 * s, va_list * args) |
| { |
| lisp_gpe_header_t *h = va_arg (*args, lisp_gpe_header_t *); |
| u32 max_header_bytes = va_arg (*args, u32); |
| u32 header_bytes; |
| |
| header_bytes = sizeof (h[0]); |
| if (max_header_bytes != 0 && header_bytes > max_header_bytes) |
| return format (s, "lisp-gpe header truncated"); |
| |
| s = format (s, "flags: "); |
| #define _(n,v) if (h->flags & v) s = format (s, "%s ", #n); |
| foreach_lisp_gpe_flag_bit; |
| #undef _ |
| |
| s = format (s, "\n ver_res %d res %d next_protocol %d iid %d(%x)", |
| h->ver_res, h->res, h->next_protocol, |
| clib_net_to_host_u32 (h->iid << 8), |
| clib_net_to_host_u32 (h->iid << 8)); |
| return s; |
| } |
| |
| /* *INDENT-OFF* */ |
| VNET_HW_INTERFACE_CLASS (lisp_gpe_hw_class) = { |
| .name = "LISP_GPE", |
| .format_header = format_lisp_gpe_header_with_length, |
| .build_rewrite = lisp_gpe_build_rewrite, |
| .update_adjacency = lisp_gpe_update_adjacency, |
| }; |
| /* *INDENT-ON* */ |
| |
| |
| typedef struct |
| { |
| u32 dpo_index; |
| } l2_lisp_gpe_tx_trace_t; |
| |
| static u8 * |
| format_l2_lisp_gpe_tx_trace (u8 * s, va_list * args) |
| { |
| CLIB_UNUSED (vlib_main_t * vm) = va_arg (*args, vlib_main_t *); |
| CLIB_UNUSED (vlib_node_t * node) = va_arg (*args, vlib_node_t *); |
| l2_lisp_gpe_tx_trace_t *t = va_arg (*args, l2_lisp_gpe_tx_trace_t *); |
| |
| s = format (s, "L2-LISP-GPE-TX: load-balance %d", t->dpo_index); |
| return s; |
| } |
| |
| /** |
| * @brief LISP-GPE interface TX (encap) function for L2 overlays. |
| * @node l2_lisp_gpe_interface_tx |
| * |
| * The L2 LISP-GPE interface TX (encap) function. |
| * |
| * Uses bridge domain index, source and destination ethernet addresses to |
| * lookup tunnel. If the tunnel is multihomed a flow has is used to determine |
| * the sub-tunnel and therefore the rewrite string to be used to encapsulate |
| * the packets. |
| * |
| * @param[in] vm vlib_main_t corresponding to the current thread. |
| * @param[in] node vlib_node_runtime_t data for this node. |
| * @param[in] frame vlib_frame_t whose contents should be dispatched. |
| * |
| * @return number of vectors in frame. |
| */ |
| static uword |
| l2_lisp_gpe_interface_tx (vlib_main_t * vm, vlib_node_runtime_t * node, |
| vlib_frame_t * from_frame) |
| { |
| u32 n_left_from, next_index, *from, *to_next; |
| lisp_gpe_main_t *lgm = &lisp_gpe_main; |
| u32 thread_index = vlib_get_thread_index (); |
| vlib_combined_counter_main_t *cm = &load_balance_main.lbm_to_counters; |
| |
| from = vlib_frame_vector_args (from_frame); |
| n_left_from = from_frame->n_vectors; |
| |
| next_index = node->cached_next_index; |
| |
| while (n_left_from > 0) |
| { |
| u32 n_left_to_next; |
| |
| vlib_get_next_frame (vm, node, next_index, to_next, n_left_to_next); |
| |
| while (n_left_from > 0 && n_left_to_next > 0) |
| { |
| vlib_buffer_t *b0; |
| u32 bi0, lbi0; |
| ethernet_header_t *e0; |
| |
| bi0 = from[0]; |
| to_next[0] = bi0; |
| from += 1; |
| to_next += 1; |
| n_left_from -= 1; |
| n_left_to_next -= 1; |
| |
| b0 = vlib_get_buffer (vm, bi0); |
| e0 = vlib_buffer_get_current (b0); |
| |
| vnet_buffer (b0)->lisp.overlay_afi = LISP_AFI_MAC; |
| |
| /* lookup dst + src mac */ |
| lbi0 = lisp_l2_fib_lookup (lgm, vnet_buffer (b0)->l2.bd_index, |
| e0->src_address, e0->dst_address); |
| vnet_buffer (b0)->ip.adj_index[VLIB_TX] = lbi0; |
| |
| vlib_increment_combined_counter (cm, thread_index, lbi0, 1, |
| vlib_buffer_length_in_chain (vm, |
| b0)); |
| if (PREDICT_FALSE (b0->flags & VLIB_BUFFER_IS_TRACED)) |
| { |
| l2_lisp_gpe_tx_trace_t *tr = vlib_add_trace (vm, node, b0, |
| sizeof (*tr)); |
| tr->dpo_index = lbi0; |
| } |
| vlib_validate_buffer_enqueue_x1 (vm, node, next_index, to_next, |
| n_left_to_next, bi0, l2_arc_to_lb); |
| } |
| |
| vlib_put_next_frame (vm, node, next_index, n_left_to_next); |
| } |
| |
| return from_frame->n_vectors; |
| } |
| |
| static u8 * |
| format_l2_lisp_gpe_name (u8 * s, va_list * args) |
| { |
| u32 dev_instance = va_arg (*args, u32); |
| return format (s, "l2_lisp_gpe%d", dev_instance); |
| } |
| |
| /* *INDENT-OFF* */ |
| VNET_DEVICE_CLASS (l2_lisp_gpe_device_class,static) = { |
| .name = "L2_LISP_GPE", |
| .format_device_name = format_l2_lisp_gpe_name, |
| .format_tx_trace = format_l2_lisp_gpe_tx_trace, |
| .tx_function = l2_lisp_gpe_interface_tx, |
| }; |
| /* *INDENT-ON* */ |
| |
| typedef struct |
| { |
| u32 dpo_index; |
| } nsh_lisp_gpe_tx_trace_t; |
| |
| u8 * |
| format_nsh_lisp_gpe_tx_trace (u8 * s, va_list * args) |
| { |
| CLIB_UNUSED (vlib_main_t * vm) = va_arg (*args, vlib_main_t *); |
| CLIB_UNUSED (vlib_node_t * node) = va_arg (*args, vlib_node_t *); |
| nsh_lisp_gpe_tx_trace_t *t = va_arg (*args, nsh_lisp_gpe_tx_trace_t *); |
| |
| s = format (s, "NSH-GPE-TX: tunnel %d", t->dpo_index); |
| return s; |
| } |
| |
| /** |
| * @brief LISP-GPE interface TX for NSH overlays. |
| * @node nsh_lisp_gpe_interface_tx |
| * |
| * The NSH LISP-GPE interface TX function. |
| * |
| * @param[in] vm vlib_main_t corresponding to the current thread. |
| * @param[in] node vlib_node_runtime_t data for this node. |
| * @param[in] frame vlib_frame_t whose contents should be dispatched. |
| * |
| * @return number of vectors in frame. |
| */ |
| static uword |
| nsh_lisp_gpe_interface_tx (vlib_main_t * vm, vlib_node_runtime_t * node, |
| vlib_frame_t * from_frame) |
| { |
| u32 n_left_from, next_index, *from, *to_next; |
| lisp_gpe_main_t *lgm = &lisp_gpe_main; |
| |
| from = vlib_frame_vector_args (from_frame); |
| n_left_from = from_frame->n_vectors; |
| |
| next_index = node->cached_next_index; |
| |
| while (n_left_from > 0) |
| { |
| u32 n_left_to_next; |
| |
| vlib_get_next_frame (vm, node, next_index, to_next, n_left_to_next); |
| |
| while (n_left_from > 0 && n_left_to_next > 0) |
| { |
| vlib_buffer_t *b0; |
| u32 bi0; |
| u32 *nsh0, next0; |
| const dpo_id_t *dpo0; |
| |
| bi0 = from[0]; |
| to_next[0] = bi0; |
| from += 1; |
| to_next += 1; |
| n_left_from -= 1; |
| n_left_to_next -= 1; |
| |
| b0 = vlib_get_buffer (vm, bi0); |
| nsh0 = vlib_buffer_get_current (b0); |
| |
| vnet_buffer (b0)->lisp.overlay_afi = LISP_AFI_LCAF; |
| |
| /* lookup SPI + SI (second word of the NSH header). |
| * NB: Load balancing was done by the control plane */ |
| dpo0 = lisp_nsh_fib_lookup (lgm, nsh0[1]); |
| |
| next0 = dpo0->dpoi_next_node; |
| vnet_buffer (b0)->ip.adj_index[VLIB_TX] = dpo0->dpoi_index; |
| |
| if (PREDICT_FALSE (b0->flags & VLIB_BUFFER_IS_TRACED)) |
| { |
| nsh_lisp_gpe_tx_trace_t *tr = vlib_add_trace (vm, node, b0, |
| sizeof (*tr)); |
| tr->dpo_index = dpo0->dpoi_index; |
| } |
| vlib_validate_buffer_enqueue_x1 (vm, node, next_index, to_next, |
| n_left_to_next, bi0, next0); |
| } |
| |
| vlib_put_next_frame (vm, node, next_index, n_left_to_next); |
| } |
| |
| return from_frame->n_vectors; |
| } |
| |
| static u8 * |
| format_nsh_lisp_gpe_name (u8 * s, va_list * args) |
| { |
| u32 dev_instance = va_arg (*args, u32); |
| return format (s, "nsh_lisp_gpe%d", dev_instance); |
| } |
| |
| /* *INDENT-OFF* */ |
| VNET_DEVICE_CLASS (nsh_lisp_gpe_device_class,static) = { |
| .name = "NSH_LISP_GPE", |
| .format_device_name = format_nsh_lisp_gpe_name, |
| .format_tx_trace = format_nsh_lisp_gpe_tx_trace, |
| .tx_function = nsh_lisp_gpe_interface_tx, |
| }; |
| /* *INDENT-ON* */ |
| |
| static vnet_hw_interface_t * |
| lisp_gpe_create_iface (lisp_gpe_main_t * lgm, u32 vni, u32 dp_table, |
| vnet_device_class_t * dev_class, |
| tunnel_lookup_t * tuns) |
| { |
| u32 flen; |
| u32 hw_if_index = ~0; |
| u8 *new_name; |
| vnet_hw_interface_t *hi; |
| vnet_main_t *vnm = lgm->vnet_main; |
| |
| /* create hw lisp_gpeX iface if needed, otherwise reuse existing */ |
| flen = vec_len (lgm->free_tunnel_hw_if_indices); |
| if (flen > 0) |
| { |
| hw_if_index = lgm->free_tunnel_hw_if_indices[flen - 1]; |
| _vec_len (lgm->free_tunnel_hw_if_indices) -= 1; |
| |
| hi = vnet_get_hw_interface (vnm, hw_if_index); |
| |
| /* rename interface */ |
| new_name = format (0, "%U", dev_class->format_device_name, vni); |
| |
| vec_add1 (new_name, 0); |
| vnet_rename_interface (vnm, hw_if_index, (char *) new_name); |
| vec_free (new_name); |
| |
| /* clear old stats of freed interface before reuse */ |
| vnet_interface_main_t *im = &vnm->interface_main; |
| vnet_interface_counter_lock (im); |
| vlib_zero_combined_counter (&im->combined_sw_if_counters |
| [VNET_INTERFACE_COUNTER_TX], |
| hi->sw_if_index); |
| vlib_zero_combined_counter (&im->combined_sw_if_counters |
| [VNET_INTERFACE_COUNTER_RX], |
| hi->sw_if_index); |
| vlib_zero_simple_counter (&im->sw_if_counters |
| [VNET_INTERFACE_COUNTER_DROP], |
| hi->sw_if_index); |
| vnet_interface_counter_unlock (im); |
| } |
| else |
| { |
| hw_if_index = vnet_register_interface (vnm, dev_class->index, vni, |
| lisp_gpe_hw_class.index, 0); |
| hi = vnet_get_hw_interface (vnm, hw_if_index); |
| } |
| |
| hash_set (tuns->hw_if_index_by_dp_table, dp_table, hw_if_index); |
| |
| /* set tunnel termination: post decap, packets are tagged as having been |
| * originated by lisp-gpe interface */ |
| hash_set (tuns->sw_if_index_by_vni, vni, hi->sw_if_index); |
| hash_set (tuns->vni_by_sw_if_index, hi->sw_if_index, vni); |
| |
| return hi; |
| } |
| |
| static void |
| lisp_gpe_remove_iface (lisp_gpe_main_t * lgm, u32 hi_index, u32 dp_table, |
| tunnel_lookup_t * tuns) |
| { |
| vnet_main_t *vnm = lgm->vnet_main; |
| vnet_hw_interface_t *hi; |
| uword *vnip; |
| |
| hi = vnet_get_hw_interface (vnm, hi_index); |
| |
| /* disable interface */ |
| vnet_sw_interface_set_flags (vnm, hi->sw_if_index, 0 /* down */ ); |
| vnet_hw_interface_set_flags (vnm, hi->hw_if_index, 0 /* down */ ); |
| hash_unset (tuns->hw_if_index_by_dp_table, dp_table); |
| vec_add1 (lgm->free_tunnel_hw_if_indices, hi->hw_if_index); |
| |
| /* clean tunnel termination and vni to sw_if_index binding */ |
| vnip = hash_get (tuns->vni_by_sw_if_index, hi->sw_if_index); |
| if (0 == vnip) |
| { |
| clib_warning ("No vni associated to interface %d", hi->sw_if_index); |
| return; |
| } |
| hash_unset (tuns->sw_if_index_by_vni, vnip[0]); |
| hash_unset (tuns->vni_by_sw_if_index, hi->sw_if_index); |
| } |
| |
| static void |
| lisp_gpe_iface_set_table (u32 sw_if_index, u32 table_id) |
| { |
| fib_node_index_t fib_index; |
| |
| fib_index = fib_table_find_or_create_and_lock (FIB_PROTOCOL_IP4, table_id, |
| FIB_SOURCE_LISP); |
| vec_validate (ip4_main.fib_index_by_sw_if_index, sw_if_index); |
| ip4_main.fib_index_by_sw_if_index[sw_if_index] = fib_index; |
| ip4_sw_interface_enable_disable (sw_if_index, 1); |
| |
| fib_index = fib_table_find_or_create_and_lock (FIB_PROTOCOL_IP6, table_id, |
| FIB_SOURCE_LISP); |
| vec_validate (ip6_main.fib_index_by_sw_if_index, sw_if_index); |
| ip6_main.fib_index_by_sw_if_index[sw_if_index] = fib_index; |
| ip6_sw_interface_enable_disable (sw_if_index, 1); |
| } |
| |
| static void |
| lisp_gpe_tenant_del_default_routes (u32 table_id) |
| { |
| fib_protocol_t proto; |
| |
| FOR_EACH_FIB_IP_PROTOCOL (proto) |
| { |
| fib_prefix_t prefix = { |
| .fp_proto = proto, |
| }; |
| u32 fib_index; |
| |
| fib_index = fib_table_find (prefix.fp_proto, table_id); |
| fib_table_entry_special_remove (fib_index, &prefix, FIB_SOURCE_LISP); |
| fib_table_unlock (fib_index, prefix.fp_proto, FIB_SOURCE_LISP); |
| } |
| } |
| |
| static void |
| lisp_gpe_tenant_add_default_routes (u32 table_id) |
| { |
| fib_protocol_t proto; |
| |
| FOR_EACH_FIB_IP_PROTOCOL (proto) |
| { |
| fib_prefix_t prefix = { |
| .fp_proto = proto, |
| }; |
| u32 fib_index; |
| |
| /* |
| * Add a deafult route that results in a control plane punt DPO |
| */ |
| fib_index = fib_table_find_or_create_and_lock (prefix.fp_proto, table_id, |
| FIB_SOURCE_LISP); |
| fib_table_entry_special_dpo_add (fib_index, &prefix, FIB_SOURCE_LISP, |
| FIB_ENTRY_FLAG_EXCLUSIVE, |
| lisp_cp_dpo_get (fib_proto_to_dpo |
| (proto))); |
| } |
| } |
| |
| |
| /** |
| * @brief Add/del LISP-GPE L3 interface. |
| * |
| * Creates LISP-GPE interface, sets ingress arcs from lisp_gpeX_lookup, |
| * installs default routes that attract all traffic with no more specific |
| * routes to lgpe-ipx-lookup, set egress arcs to ipx-lookup, sets |
| * the interface in the right vrf and enables it. |
| * |
| * @param[in] lgm Reference to @ref lisp_gpe_main_t. |
| * @param[in] a Parameters to create interface. |
| * |
| * @return number of vectors in frame. |
| */ |
| u32 |
| lisp_gpe_add_l3_iface (lisp_gpe_main_t * lgm, u32 vni, u32 table_id, |
| u8 with_default_routes) |
| { |
| vnet_main_t *vnm = lgm->vnet_main; |
| tunnel_lookup_t *l3_ifaces = &lgm->l3_ifaces; |
| vnet_hw_interface_t *hi; |
| uword *hip, *si; |
| |
| hip = hash_get (l3_ifaces->hw_if_index_by_dp_table, table_id); |
| |
| if (hip) |
| { |
| clib_warning ("vrf %d already mapped to a vni", table_id); |
| return ~0; |
| } |
| |
| si = hash_get (l3_ifaces->sw_if_index_by_vni, vni); |
| |
| if (si) |
| { |
| clib_warning ("Interface for vni %d already exists", vni); |
| } |
| |
| /* create lisp iface and populate tunnel tables */ |
| hi = lisp_gpe_create_iface (lgm, vni, table_id, |
| &lisp_gpe_device_class, l3_ifaces); |
| |
| /* insert default routes that point to lisp-cp lookup */ |
| lisp_gpe_iface_set_table (hi->sw_if_index, table_id); |
| if (with_default_routes) |
| lisp_gpe_tenant_add_default_routes (table_id); |
| |
| /* enable interface */ |
| vnet_sw_interface_set_flags (vnm, hi->sw_if_index, |
| VNET_SW_INTERFACE_FLAG_ADMIN_UP); |
| vnet_hw_interface_set_flags (vnm, hi->hw_if_index, |
| VNET_HW_INTERFACE_FLAG_LINK_UP); |
| |
| return (hi->sw_if_index); |
| } |
| |
| void |
| lisp_gpe_del_l3_iface (lisp_gpe_main_t * lgm, u32 vni, u32 table_id) |
| { |
| vnet_main_t *vnm = lgm->vnet_main; |
| tunnel_lookup_t *l3_ifaces = &lgm->l3_ifaces; |
| vnet_hw_interface_t *hi; |
| uword *hip; |
| |
| hip = hash_get (l3_ifaces->hw_if_index_by_dp_table, table_id); |
| |
| if (hip == 0) |
| { |
| clib_warning ("The interface for vrf %d doesn't exist", table_id); |
| return; |
| } |
| |
| hi = vnet_get_hw_interface (vnm, hip[0]); |
| |
| lisp_gpe_remove_iface (lgm, hip[0], table_id, &lgm->l3_ifaces); |
| |
| /* unset default routes */ |
| ip4_sw_interface_enable_disable (hi->sw_if_index, 0); |
| ip6_sw_interface_enable_disable (hi->sw_if_index, 0); |
| lisp_gpe_tenant_del_default_routes (table_id); |
| } |
| |
| /** |
| * @brief Add/del LISP-GPE L2 interface. |
| * |
| * Creates LISP-GPE interface, sets it in L2 mode in the appropriate |
| * bridge domain, sets egress arcs and enables it. |
| * |
| * @param[in] lgm Reference to @ref lisp_gpe_main_t. |
| * @param[in] a Parameters to create interface. |
| * |
| * @return number of vectors in frame. |
| */ |
| u32 |
| lisp_gpe_add_l2_iface (lisp_gpe_main_t * lgm, u32 vni, u32 bd_id) |
| { |
| vnet_main_t *vnm = lgm->vnet_main; |
| tunnel_lookup_t *l2_ifaces = &lgm->l2_ifaces; |
| vnet_hw_interface_t *hi; |
| uword *hip, *si; |
| u16 bd_index; |
| |
| if (bd_id > L2_BD_ID_MAX) |
| { |
| clib_warning ("bridge domain ID %d exceed 16M limit", bd_id); |
| return ~0; |
| } |
| |
| bd_index = bd_find_or_add_bd_index (&bd_main, bd_id); |
| hip = hash_get (l2_ifaces->hw_if_index_by_dp_table, bd_index); |
| |
| if (hip) |
| { |
| clib_warning ("bridge domain %d already mapped to a vni", bd_id); |
| return ~0; |
| } |
| |
| si = hash_get (l2_ifaces->sw_if_index_by_vni, vni); |
| if (si) |
| { |
| clib_warning ("Interface for vni %d already exists", vni); |
| return ~0; |
| } |
| |
| /* create lisp iface and populate tunnel tables */ |
| hi = lisp_gpe_create_iface (lgm, vni, bd_index, |
| &l2_lisp_gpe_device_class, &lgm->l2_ifaces); |
| |
| /* enable interface */ |
| vnet_sw_interface_set_flags (vnm, hi->sw_if_index, |
| VNET_SW_INTERFACE_FLAG_ADMIN_UP); |
| vnet_hw_interface_set_flags (vnm, hi->hw_if_index, |
| VNET_HW_INTERFACE_FLAG_LINK_UP); |
| |
| l2_arc_to_lb = vlib_node_add_named_next (vlib_get_main (), |
| hi->tx_node_index, |
| "l2-load-balance"); |
| |
| /* we're ready. add iface to l2 bridge domain */ |
| set_int_l2_mode (lgm->vlib_main, vnm, MODE_L2_BRIDGE, hi->sw_if_index, |
| bd_index, 0, 0, 0); |
| |
| return (hi->sw_if_index); |
| } |
| |
| /** |
| * @brief Add/del LISP-GPE L2 interface. |
| * |
| * Creates LISP-GPE interface, sets it in L2 mode in the appropriate |
| * bridge domain, sets egress arcs and enables it. |
| * |
| * @param[in] lgm Reference to @ref lisp_gpe_main_t. |
| * @param[in] a Parameters to create interface. |
| * |
| * @return number of vectors in frame. |
| */ |
| void |
| lisp_gpe_del_l2_iface (lisp_gpe_main_t * lgm, u32 vni, u32 bd_id) |
| { |
| tunnel_lookup_t *l2_ifaces = &lgm->l2_ifaces; |
| vnet_hw_interface_t *hi; |
| |
| u32 bd_index = bd_find_index (&bd_main, bd_id); |
| ASSERT (bd_index != ~0); |
| uword *hip = hash_get (l2_ifaces->hw_if_index_by_dp_table, bd_index); |
| |
| if (hip == 0) |
| { |
| clib_warning ("The interface for bridge domain %d doesn't exist", |
| bd_id); |
| return; |
| } |
| |
| /* Remove interface from bridge .. by enabling L3 mode */ |
| hi = vnet_get_hw_interface (lgm->vnet_main, hip[0]); |
| set_int_l2_mode (lgm->vlib_main, lgm->vnet_main, MODE_L3, hi->sw_if_index, |
| 0, 0, 0, 0); |
| lisp_gpe_remove_iface (lgm, hip[0], bd_index, &lgm->l2_ifaces); |
| } |
| |
| /** |
| * @brief Add LISP-GPE NSH interface. |
| * |
| * Creates LISP-GPE interface, sets it in L3 mode. |
| * |
| * @param[in] lgm Reference to @ref lisp_gpe_main_t. |
| * @param[in] a Parameters to create interface. |
| * |
| * @return sw_if_index. |
| */ |
| u32 |
| vnet_lisp_gpe_add_nsh_iface (lisp_gpe_main_t * lgm) |
| { |
| vnet_main_t *vnm = lgm->vnet_main; |
| tunnel_lookup_t *nsh_ifaces = &lgm->nsh_ifaces; |
| vnet_hw_interface_t *hi; |
| uword *hip, *si; |
| |
| hip = hash_get (nsh_ifaces->hw_if_index_by_dp_table, 0); |
| |
| if (hip) |
| { |
| clib_warning ("NSH interface 0 already exists"); |
| return ~0; |
| } |
| |
| si = hash_get (nsh_ifaces->sw_if_index_by_vni, 0); |
| if (si) |
| { |
| clib_warning ("NSH interface already exists"); |
| return ~0; |
| } |
| |
| /* create lisp iface and populate tunnel tables */ |
| hi = lisp_gpe_create_iface (lgm, 0, 0, |
| &nsh_lisp_gpe_device_class, &lgm->nsh_ifaces); |
| |
| /* enable interface */ |
| vnet_sw_interface_set_flags (vnm, hi->sw_if_index, |
| VNET_SW_INTERFACE_FLAG_ADMIN_UP); |
| vnet_hw_interface_set_flags (vnm, hi->hw_if_index, |
| VNET_HW_INTERFACE_FLAG_LINK_UP); |
| |
| return (hi->sw_if_index); |
| } |
| |
| /** |
| * @brief Del LISP-GPE NSH interface. |
| * |
| */ |
| void |
| vnet_lisp_gpe_del_nsh_iface (lisp_gpe_main_t * lgm) |
| { |
| tunnel_lookup_t *nsh_ifaces = &lgm->nsh_ifaces; |
| uword *hip; |
| |
| hip = hash_get (nsh_ifaces->hw_if_index_by_dp_table, 0); |
| |
| if (hip == 0) |
| { |
| clib_warning ("The NSH 0 interface doesn't exist"); |
| return; |
| } |
| lisp_gpe_remove_iface (lgm, hip[0], 0, &lgm->nsh_ifaces); |
| } |
| |
| static clib_error_t * |
| lisp_gpe_add_del_iface_command_fn (vlib_main_t * vm, unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| u8 is_add = 1; |
| u32 table_id, vni, bd_id; |
| u8 vni_is_set = 0, vrf_is_set = 0, bd_index_is_set = 0; |
| u8 nsh_iface = 0; |
| clib_error_t *error = NULL; |
| |
| if (vnet_lisp_gpe_enable_disable_status () == 0) |
| { |
| return clib_error_return (0, "LISP is disabled"); |
| } |
| |
| /* Get a line of input. */ |
| if (!unformat_user (input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "add")) |
| is_add = 1; |
| else if (unformat (line_input, "del")) |
| is_add = 0; |
| else if (unformat (line_input, "vrf %d", &table_id)) |
| { |
| vrf_is_set = 1; |
| } |
| else if (unformat (line_input, "vni %d", &vni)) |
| { |
| vni_is_set = 1; |
| } |
| else if (unformat (line_input, "bd %d", &bd_id)) |
| { |
| bd_index_is_set = 1; |
| } |
| else if (unformat (line_input, "nsh")) |
| { |
| nsh_iface = 1; |
| } |
| else |
| { |
| error = clib_error_return (0, "parse error: '%U'", |
| format_unformat_error, line_input); |
| goto done; |
| } |
| } |
| |
| if (nsh_iface) |
| { |
| if (is_add) |
| { |
| if (~0 == vnet_lisp_gpe_add_nsh_iface (&lisp_gpe_main)) |
| { |
| error = clib_error_return (0, "NSH interface not created"); |
| goto done; |
| } |
| } |
| else |
| { |
| vnet_lisp_gpe_del_nsh_iface (&lisp_gpe_main); |
| } |
| goto done; |
| } |
| |
| if (vrf_is_set && bd_index_is_set) |
| { |
| error = clib_error_return |
| (0, "Cannot set both vrf and brdige domain index!"); |
| goto done; |
| } |
| |
| if (!vni_is_set) |
| { |
| error = clib_error_return (0, "vni must be set!"); |
| goto done; |
| } |
| |
| if (!vrf_is_set && !bd_index_is_set) |
| { |
| error = |
| clib_error_return (0, "vrf or bridge domain index must be set!"); |
| goto done; |
| } |
| |
| if (bd_index_is_set) |
| { |
| if (is_add) |
| { |
| if (~0 == lisp_gpe_tenant_l2_iface_add_or_lock (vni, bd_id)) |
| { |
| error = clib_error_return (0, "L2 interface not created"); |
| goto done; |
| } |
| } |
| else |
| lisp_gpe_tenant_l2_iface_unlock (vni); |
| } |
| else |
| { |
| if (is_add) |
| { |
| if (~0 == lisp_gpe_tenant_l3_iface_add_or_lock (vni, table_id, 1 |
| /* with_default_route */ |
| )) |
| { |
| error = clib_error_return (0, "L3 interface not created"); |
| goto done; |
| } |
| } |
| else |
| lisp_gpe_tenant_l3_iface_unlock (vni); |
| } |
| |
| done: |
| unformat_free (line_input); |
| |
| return error; |
| } |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND (add_del_lisp_gpe_iface_command, static) = { |
| .path = "gpe iface", |
| .short_help = "gpe iface add/del vni <vni> vrf <vrf>", |
| .function = lisp_gpe_add_del_iface_command_fn, |
| }; |
| /* *INDENT-ON* */ |
| |
| /* |
| * fd.io coding-style-patch-verification: ON |
| * |
| * Local Variables: |
| * eval: (c-set-style "gnu") |
| * End: |
| */ |