| # Copyright (c) 2015 Cisco and/or its affiliates. |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at: |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Scripts require non-POSIX parts of bash |
| SHELL := /bin/bash |
| |
| DPDK_BUILD_DIR ?= $(CURDIR)/_build |
| DPDK_INSTALL_DIR ?= $(CURDIR)/_install |
| DPDK_PKTMBUF_HEADROOM ?= 128 |
| DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads |
| DPDK_DEBUG ?= n |
| DPDK_CRYPTO_SW_PMD ?= n |
| DPDK_MLX5_PMD ?= n |
| |
| B := $(DPDK_BUILD_DIR) |
| I := $(DPDK_INSTALL_DIR) |
| DPDK_VERSION ?= 17.02 |
| PKG_SUFFIX ?= vpp1 |
| DPDK_BASE_URL ?= http://fast.dpdk.org/rel |
| DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz |
| DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL) |
| DPDK_16.07_TARBALL_MD5_CKSUM := 690a2bb570103e58d12f9806e8bf21be |
| DPDK_16.11_TARBALL_MD5_CKSUM := 06c1c577795360719d0b4fafaeee21e9 |
| DPDK_17.02_TARBALL_MD5_CKSUM := 6b9f7387c35641f4e8dbba3e528f2376 |
| DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION) |
| |
| ifeq ($(DPDK_CRYPTO_SW_PMD),y) |
| AESNIMB_LIB_TARBALL := v0.44.tar.gz |
| AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL) |
| AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-0.44 |
| ISA_L_CRYPTO_LIB_TARBALL := isa_l_crypto.tar.gz |
| ISA_L_CRYPTO_LIB_TARBALL_URL := http://github.com/01org/isa-l_crypto/archive/master.tar.gz |
| ISA_L_CRYPTO_LIB_SOURCE := $(B)/isa-l_crypto-master |
| endif |
| |
| ifneq (,$(findstring clang,$(CC))) |
| DPDK_CC=clang |
| else ifneq (,$(findstring icc,$(CC))) |
| DPDK_CC=icc |
| else |
| DPDK_CC=gcc |
| endif |
| |
| ############################################################################## |
| # Intel x86_64 |
| ############################################################################## |
| ifeq ($(shell uname -m),x86_64) |
| DPDK_TARGET ?= x86_64-native-linuxapp-$(DPDK_CC) |
| DPDK_MACHINE ?= nhm |
| DPDK_TUNE ?= core-avx2 |
| |
| ############################################################################## |
| # Cavium ThunderX |
| ############################################################################## |
| else ifneq (,$(findstring thunder,$(shell cat /sys/bus/pci/devices/0000:00:01.0/uevent | grep cavium))) |
| export CROSS="" |
| DPDK_TARGET ?= arm64-thunderx-linuxapp-$(DPDK_CC) |
| DPDK_MACHINE ?= thunderx |
| DPDK_TUNE ?= generic |
| |
| ############################################################################## |
| # Unknown platofrm |
| ############################################################################## |
| else |
| $(error unknown platform) |
| endif |
| |
| JOBS := $(shell grep processor /proc/cpuinfo | wc -l) |
| |
| # compiler/linker custom arguments |
| DPDK_CPU_CFLAGS := -pie -fPIC |
| DPDK_EXTRA_LDFLAGS := -g |
| |
| ifeq ($(DPDK_DEBUG),n) |
| DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE) |
| else |
| DPDK_EXTRA_CFLAGS := -g -O0 |
| endif |
| |
| ifeq ($(DPDK_CRYPTO_SW_PMD),y) |
| DPDK_EXTRA_CFLAGS += -I$(ISA_L_CRYPTO_LIB_SOURCE) |
| DPDK_EXTRA_LDFLAGS += -L$(ISA_L_CRYPTO_LIB_SOURCE)/.libs |
| DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE) |
| endif |
| |
| # assemble DPDK make arguments |
| DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \ |
| T=$(DPDK_TARGET) \ |
| RTE_CONFIG_TEMPLATE=../custom-config \ |
| EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \ |
| EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \ |
| CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \ |
| DESTDIR=$(I) \ |
| $(DPDK_MAKE_EXTRA_ARGS) |
| |
| DPDK_SOURCE_FILES := $(shell [ -e $(DPDK_SOURCE) ] && find $(DPDK_SOURCE) -name "*.[chS]") |
| |
| define set |
| @if grep -q CONFIG_$1 $@ ; \ |
| then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \ |
| else echo CONFIG_$1=$2 >> $@ ; \ |
| fi |
| endef |
| |
| all: build |
| |
| $(B)/custom-config: $(B)/.patch.ok Makefile |
| @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) --- |
| @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@ |
| $(call set,RTE_MACHINE,$(DPDK_MACHINE)) |
| @# modify options |
| $(call set,RTE_MAX_LCORE,256) |
| $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM)) |
| $(call set,RTE_LIBEAL_USE_HPET,y) |
| $(call set,RTE_BUILD_COMBINE_LIBS,y) |
| $(call set,RTE_LIBRTE_I40E_16BYTE_RX_DESC,y) |
| $(call set,RTE_PCI_CONFIG,y) |
| $(call set,RTE_PCI_EXTENDED_TAG,"on") |
| $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096) |
| @# enable debug init for device drivers |
| $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG)) |
| $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG)) |
| $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG)) |
| $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG)) |
| $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG)) |
| $(call set,RTE_LIBRTE_PMD_BOND,y) |
| $(call set,RTE_LIBRTE_IP_FRAG,y) |
| $(call set,RTE_LIBRTE_PMD_QAT,y) |
| $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(DPDK_CRYPTO_SW_PMD)) |
| $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(DPDK_CRYPTO_SW_PMD)) |
| $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD)) |
| @# not needed |
| $(call set,RTE_LIBRTE_TIMER,n) |
| $(call set,RTE_LIBRTE_CFGFILE,n) |
| $(call set,RTE_LIBRTE_LPM,n) |
| $(call set,RTE_LIBRTE_ACL,n) |
| $(call set,RTE_LIBRTE_POWER,n) |
| $(call set,RTE_LIBRTE_DISTRIBUTOR,n) |
| $(call set,RTE_LIBRTE_REORDER,n) |
| $(call set,RTE_LIBRTE_PORT,n) |
| $(call set,RTE_LIBRTE_TABLE,n) |
| $(call set,RTE_LIBRTE_PIPELINE,n) |
| $(call set,RTE_KNI_KMOD,n) |
| $(call set,RTE_EAL_IGB_UIO,n) |
| @rm -f .config.ok |
| |
| $(CURDIR)/$(DPDK_TARBALL): |
| @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \ |
| then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \ |
| else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \ |
| fi |
| ifeq ($(DPDK_CRYPTO_SW_PMD),y) |
| @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \ |
| then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \ |
| else curl -o $(CURDIR)/$(AESNIMB_LIB_TARBALL) -LO $(AESNIMB_LIB_TARBALL_URL) ; \ |
| fi |
| @if [ -e $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) ] ; \ |
| then cp $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) $(CURDIR) ; \ |
| else curl -o $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL) -LO $(ISA_L_CRYPTO_LIB_TARBALL_URL) ; \ |
| fi |
| endif |
| @rm -f $(B)/.download.ok |
| |
| $(B)/.download.ok: $(CURDIR)/$(DPDK_TARBALL) |
| @mkdir -p $(B) |
| @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum |
| @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \ |
| ( echo "Bad Checksum! Please remove $< and retry" && \ |
| rm $(B)/$(DPDK_TARBALL).md5sum && false )) |
| @touch $@ |
| |
| .PHONY: download |
| download: $(B)/.download.ok |
| |
| $(B)/.extract.ok: $(B)/.download.ok |
| @echo --- extracting $(DPDK_TARBALL) --- |
| @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL) |
| ifeq ($(DPDK_CRYPTO_SW_PMD),y) |
| @echo --- extracting $(AESNIMB_LIB_TARBALL) --- |
| @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL) |
| @echo --- extracting $(ISA_L_CRYPTO_LIB_TARBALL) --- |
| @tar --directory $(B) --extract --file $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL) |
| endif |
| @touch $@ |
| |
| .PHONY: extract |
| extract: $(B)/.extract.ok |
| |
| $(B)/.patch.ok: $(B)/.extract.ok |
| ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),) |
| @echo --- patching --- |
| @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \ |
| echo Applying patch: $$(basename $$f) ; \ |
| patch -p1 -d $(DPDK_SOURCE) < $$f ; \ |
| done |
| endif |
| @touch $@ |
| |
| .PHONY: patch |
| patch: $(B)/.patch.ok |
| |
| $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config |
| ifeq ($(DPDK_CRYPTO_SW_PMD),y) |
| @make -C $(AESNIMB_LIB_SOURCE) |
| @cd $(ISA_L_CRYPTO_LIB_SOURCE) && ./autogen.sh && ./configure |
| @make -C $(ISA_L_CRYPTO_LIB_SOURCE) |
| @cp $(ISA_L_CRYPTO_LIB_SOURCE)/include $(ISA_L_CRYPTO_LIB_SOURCE)/isa-l_crypto -r |
| endif |
| @make $(DPDK_MAKE_ARGS) config |
| @touch $@ |
| |
| .PHONY: config |
| config: $(B)/.config.ok |
| |
| $(B)/.build.ok: $(DPDK_SOURCE_FILES) |
| @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi |
| @make $(DPDK_MAKE_ARGS) install |
| ifeq ($(DPDK_CRYPTO_SW_PMD),y) |
| @cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/ |
| @cp $(ISA_L_CRYPTO_LIB_SOURCE)/.libs/libisal_crypto.a $(I)/lib/ |
| endif |
| @touch $@ |
| |
| .PHONY: build |
| build: $(B)/.build.ok |
| |
| .PHONY: install |
| install: $(B)/.build.ok |
| |
| .PHONY: clean |
| clean: |
| @rm -rf $(B) $(I) |
| |
| ############################################################################## |
| # .deb packaging |
| ############################################################################## |
| |
| DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null) |
| DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb |
| INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null) |
| |
| .PHONY: build-deb install-deb check-deb |
| |
| deb/debian/changelog: Makefile |
| @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@ |
| @echo "" >> $@ |
| @echo " * DPDK Release $(DPDK_VERSION)" >> $@ |
| @echo "" >> $@ |
| @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@ |
| |
| $(DEV_DEB): deb/debian/changelog |
| @cd deb && dpkg-buildpackage -b -uc -us |
| git clean -fdx deb |
| |
| build-deb: $(DEV_DEB) |
| |
| install-deb: |
| ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) |
| @make $(DEV_DEB) |
| @sudo dpkg -i $(DEV_DEB) |
| else |
| @echo "==========================================================" |
| @echo " Up-to-date DPDK package already installed" |
| @echo "==========================================================" |
| endif |
| |
| check-deb: |
| ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) |
| @echo "==========================================================" |
| @echo " Outdated DPDK package detected:" |
| @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)" |
| @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)" |
| @echo "" |
| @echo " Please upgrade by invoking 'make dpdk-install-dev'" |
| @echo " from the top level directory." |
| @echo "==========================================================" |
| endif |
| |
| ############################################################################## |
| # .rpm packaging |
| ############################################################################## |
| |
| RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null) |
| DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm |
| INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst") |
| |
| .PHONY: build-rpm install-rpm check-rpm |
| |
| $(DEV_RPM): Makefile rpm/vpp-dpdk.spec |
| @rpmbuild -bb \ |
| --define "_topdir $(CURDIR)/rpm" \ |
| --define "_version $(DPDK_VERSION)" \ |
| --define "_release $(PKG_SUFFIX)" \ |
| $(CURDIR)/rpm/vpp-dpdk.spec |
| mv rpm/RPMS/$(RPM_ARCH)/*.rpm . |
| git clean -fdx rpm |
| |
| build-rpm: $(DEV_RPM) |
| |
| install-rpm: |
| ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) |
| @make $(DEV_RPM) |
| sudo rpm -Uih $(DEV_RPM) |
| else |
| @echo "==========================================================" |
| @echo " Up-to-date DPDK package already installed" |
| @echo "==========================================================" |
| endif |
| |
| check-rpm: |
| ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) |
| @echo "==========================================================" |
| @echo " Outdated DPDK package detected:" |
| @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)" |
| @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)" |
| @echo "" |
| @echo " Please upgrade by invoking 'make dpdk-install-dev'" |
| @echo " from the top level directory." |
| @echo "==========================================================" |
| endif |
| |
| ############################################################################## |
| # ebuild support |
| ############################################################################## |
| |
| .PHONY: ebuild-build ebuild-install |
| |
| ebuild-build: |
| ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) |
| @echo "==========================================================" |
| @echo "Building DPDK from source. Consider installing development" |
| @echo "package by invoking 'make dpdk-install-dev' from the" |
| @echo "top level directory" |
| @echo "==========================================================" |
| make config |
| else |
| ifneq ($(INSTALLED_DEB_VER),) |
| make check-deb |
| endif |
| ifneq ($(INSTALLED_RPM_VER),) |
| make check-rpm |
| endif |
| endif |
| |
| ebuild-install: |
| ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) |
| make install |
| endif |