| #!/usr/bin/env python3 |
| |
| import unittest |
| |
| from framework import VppTestCase |
| from asfframework import VppTestRunner, tag_fixme_vpp_workers |
| from vpp_ip import INVALID_INDEX |
| from vpp_ip_route import ( |
| VppIpRoute, |
| VppRoutePath, |
| VppMplsRoute, |
| VppMplsIpBind, |
| VppIpMRoute, |
| VppMRoutePath, |
| VppIpTable, |
| VppMplsTable, |
| VppMplsLabel, |
| MplsLspMode, |
| find_mpls_route, |
| FibPathProto, |
| FibPathType, |
| FibPathFlags, |
| VppMplsLabel, |
| MplsLspMode, |
| ) |
| from vpp_mpls_tunnel_interface import VppMPLSTunnelInterface |
| from vpp_papi import VppEnum |
| |
| import scapy.compat |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether, ARP |
| from scapy.layers.inet import IP, UDP, ICMP, icmptypes, icmpcodes |
| from scapy.layers.inet6 import ( |
| IPv6, |
| ICMPv6TimeExceeded, |
| ICMPv6EchoRequest, |
| ICMPv6PacketTooBig, |
| ) |
| from scapy.contrib.mpls import MPLS |
| |
| NUM_PKTS = 67 |
| |
| # scapy removed these attributes. |
| # we asked that they be restored: https://github.com/secdev/scapy/pull/1878 |
| # semantic names have more meaning than numbers. so here they are. |
| ARP.who_has = 1 |
| ARP.is_at = 2 |
| |
| |
| def verify_filter(capture, sent): |
| if not len(capture) == len(sent): |
| # filter out any IPv6 RAs from the capture |
| for p in capture: |
| if p.haslayer(IPv6): |
| capture.remove(p) |
| return capture |
| |
| |
| def verify_mpls_stack(tst, rx, mpls_labels): |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| tst.assertEqual(eth.type, 0x8847) |
| |
| rx_mpls = rx[MPLS] |
| |
| for ii in range(len(mpls_labels)): |
| tst.assertEqual(rx_mpls.label, mpls_labels[ii].value) |
| tst.assertEqual(rx_mpls.cos, mpls_labels[ii].exp) |
| tst.assertEqual(rx_mpls.ttl, mpls_labels[ii].ttl) |
| |
| if ii == len(mpls_labels) - 1: |
| tst.assertEqual(rx_mpls.s, 1) |
| else: |
| # not end of stack |
| tst.assertEqual(rx_mpls.s, 0) |
| # pop the label to expose the next |
| rx_mpls = rx_mpls[MPLS].payload |
| |
| |
| @tag_fixme_vpp_workers |
| class TestMPLS(VppTestCase): |
| """MPLS Test Case""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLS, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLS, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLS, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| # setup both interfaces |
| # assign them different tables. |
| table_id = 0 |
| self.tables = [] |
| |
| tbl = VppMplsTable(self, 0) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| for i in self.pg_interfaces: |
| i.admin_up() |
| |
| if table_id != 0: |
| tbl = VppIpTable(self, table_id) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| tbl = VppIpTable(self, table_id, is_ip6=1) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| i.set_table_ip4(table_id) |
| i.set_table_ip6(table_id) |
| i.config_ip4() |
| i.resolve_arp() |
| i.config_ip6() |
| i.resolve_ndp() |
| i.enable_mpls() |
| table_id += 1 |
| |
| def tearDown(self): |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.set_table_ip4(0) |
| i.set_table_ip6(0) |
| i.disable_mpls() |
| i.admin_down() |
| super(TestMPLS, self).tearDown() |
| |
| # the default of 64 matches the IP packet TTL default |
| def create_stream_labelled_ip4( |
| self, |
| src_if, |
| mpls_labels, |
| ping=0, |
| ip_itf=None, |
| dst_ip=None, |
| chksum=None, |
| ip_ttl=64, |
| n=257, |
| ): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, n): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| |
| for ii in range(len(mpls_labels)): |
| p = p / MPLS( |
| label=mpls_labels[ii].value, |
| ttl=mpls_labels[ii].ttl, |
| cos=mpls_labels[ii].exp, |
| ) |
| if not ping: |
| if not dst_ip: |
| p = ( |
| p |
| / IP(src=src_if.local_ip4, dst=src_if.remote_ip4, ttl=ip_ttl) |
| / UDP(sport=1234, dport=1234) |
| / Raw(payload) |
| ) |
| else: |
| p = ( |
| p |
| / IP(src=src_if.local_ip4, dst=dst_ip, ttl=ip_ttl) |
| / UDP(sport=1234, dport=1234) |
| / Raw(payload) |
| ) |
| else: |
| p = ( |
| p |
| / IP(src=ip_itf.remote_ip4, dst=ip_itf.local_ip4, ttl=ip_ttl) |
| / ICMP() |
| ) |
| |
| if chksum: |
| p[IP].chksum = chksum |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_ip4( |
| self, src_if, dst_ip, ip_ttl=64, ip_dscp=0, payload_size=None, n=257 |
| ): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, n): |
| dst = dst_ip[i % len(dst_ip)] if isinstance(dst_ip, list) else dst_ip |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = ( |
| Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| / IP(src=src_if.remote_ip4, dst=dst, ttl=ip_ttl, tos=ip_dscp) |
| / UDP(sport=1234, dport=1234) |
| / Raw(payload) |
| ) |
| info.data = p.copy() |
| if payload_size: |
| self.extend_packet(p, payload_size) |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_ip6(self, src_if, dst_ip, ip_ttl=64, ip_dscp=0, n=257): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, n): |
| dst = dst_ip[i % len(dst_ip)] if isinstance(dst_ip, list) else dst_ip |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = ( |
| Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| / IPv6(src=src_if.remote_ip6, dst=dst, hlim=ip_ttl, tc=ip_dscp) |
| / UDP(sport=1234, dport=1234) |
| / Raw(payload) |
| ) |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_labelled_ip6( |
| self, src_if, mpls_labels, hlim=64, dst_ip=None, ping=0, ip_itf=None |
| ): |
| if dst_ip is None: |
| dst_ip = src_if.remote_ip6 |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, 257): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| for l in mpls_labels: |
| p = p / MPLS(label=l.value, ttl=l.ttl, cos=l.exp) |
| |
| if ping: |
| p = p / ( |
| IPv6(src=ip_itf.remote_ip6, dst=ip_itf.local_ip6) |
| / ICMPv6EchoRequest() |
| ) |
| else: |
| p = p / ( |
| IPv6(src=src_if.remote_ip6, dst=dst_ip, hlim=hlim) |
| / UDP(sport=1234, dport=1234) |
| / Raw(payload) |
| ) |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def verify_capture_ip4( |
| self, src_if, capture, sent, ping_resp=0, ip_ttl=None, ip_dscp=0 |
| ): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x800) |
| |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| if not ping_resp: |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| self.assertEqual(rx_ip.tos, ip_dscp) |
| if not ip_ttl: |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| else: |
| self.assertEqual(rx_ip.ttl, ip_ttl) |
| else: |
| self.assertEqual(rx_ip.src, tx_ip.dst) |
| self.assertEqual(rx_ip.dst, tx_ip.src) |
| |
| except: |
| raise |
| |
| def verify_capture_labelled_ip4( |
| self, src_if, capture, sent, mpls_labels, ip_ttl=None |
| ): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| if not ip_ttl: |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| else: |
| self.assertEqual(rx_ip.ttl, ip_ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_labelled_ip6( |
| self, src_if, capture, sent, mpls_labels, ip_ttl=None |
| ): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IPv6] |
| rx_ip = rx[IPv6] |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| if not ip_ttl: |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim) |
| else: |
| self.assertEqual(rx_ip.hlim, ip_ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_tunneled_ip4(self, src_if, capture, sent, mpls_labels): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_labelled(self, src_if, capture, sent, mpls_labels): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| rx = capture[i] |
| verify_mpls_stack(self, rx, mpls_labels) |
| except: |
| raise |
| |
| def verify_capture_ip6( |
| self, src_if, capture, sent, ip_hlim=None, ip_dscp=0, ping_resp=0 |
| ): |
| try: |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x86DD) |
| |
| tx_ip = tx[IPv6] |
| rx_ip = rx[IPv6] |
| |
| if not ping_resp: |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| self.assertEqual(rx_ip.tc, ip_dscp) |
| # IP processing post pop has decremented the TTL |
| if not ip_hlim: |
| self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim) |
| else: |
| self.assertEqual(rx_ip.hlim, ip_hlim) |
| else: |
| self.assertEqual(rx_ip.src, tx_ip.dst) |
| self.assertEqual(rx_ip.dst, tx_ip.src) |
| except: |
| raise |
| |
| def verify_capture_ip6_icmp(self, src_if, capture, sent): |
| try: |
| # rate limited ICMP |
| self.assertTrue(len(capture) <= len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x86DD) |
| |
| tx_ip = tx[IPv6] |
| rx_ip = rx[IPv6] |
| |
| self.assertEqual(rx_ip.dst, tx_ip.src) |
| # ICMP sourced from the interface's address |
| self.assertEqual(rx_ip.src, src_if.local_ip6) |
| # hop-limit reset to 255 for IMCP packet |
| self.assertEqual(rx_ip.hlim, 255) |
| |
| icmp = rx[ICMPv6TimeExceeded] |
| |
| except: |
| raise |
| |
| def verify_capture_fragmented_labelled_ip4( |
| self, src_if, capture, sent, mpls_labels, ip_ttl=None |
| ): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| for i in range(len(capture)): |
| tx = sent[0] |
| rx = capture[i] |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| if not ip_ttl: |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| else: |
| self.assertEqual(rx_ip.ttl, ip_ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_fragmented_labelled_ip6( |
| self, src_if, capture, sent, mpls_labels, ip_ttl=None |
| ): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| for i in range(len(capture)): |
| tx = sent[0] |
| rx = capture[i] |
| tx_ip = tx[IPv6] |
| rx.show() |
| rx_ip = IPv6(rx[MPLS].payload) |
| rx_ip.show() |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| if not ip_ttl: |
| # IP processing post pop has decremented the hop-limit |
| self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim) |
| else: |
| self.assertEqual(rx_ip.hlim, ip_ttl) |
| except: |
| raise |
| |
| def test_swap(self): |
| """MPLS label swap tests""" |
| |
| # |
| # A simple MPLS xconnect - eos label in label out |
| # |
| route_32_eos = VppMplsRoute( |
| self, |
| 32, |
| 1, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(33)] |
| ) |
| ], |
| ) |
| route_32_eos.add_vpp_config() |
| |
| self.assertTrue( |
| find_mpls_route( |
| self, |
| 0, |
| 32, |
| 1, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(33)], |
| ) |
| ], |
| ) |
| ) |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(32, ttl=32, exp=1)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled( |
| self.pg0, rx, tx, [VppMplsLabel(33, ttl=31, exp=1)] |
| ) |
| |
| self.assertEqual(route_32_eos.get_stats_to()["packets"], 257) |
| |
| # |
| # A simple MPLS xconnect - non-eos label in label out |
| # |
| route_32_neos = VppMplsRoute( |
| self, |
| 32, |
| 0, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(33)] |
| ) |
| ], |
| ) |
| route_32_neos.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(32, ttl=21, exp=7), VppMplsLabel(99)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled( |
| self.pg0, rx, tx, [VppMplsLabel(33, ttl=20, exp=7), VppMplsLabel(99)] |
| ) |
| self.assertEqual(route_32_neos.get_stats_to()["packets"], 257) |
| |
| # |
| # A simple MPLS xconnect - non-eos label in label out, uniform mode |
| # |
| route_42_neos = VppMplsRoute( |
| self, |
| 42, |
| 0, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(43, MplsLspMode.UNIFORM)], |
| ) |
| ], |
| ) |
| route_42_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(42, ttl=21, exp=7), VppMplsLabel(99)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled( |
| self.pg0, rx, tx, [VppMplsLabel(43, ttl=20, exp=7), VppMplsLabel(99)] |
| ) |
| |
| # |
| # An MPLS xconnect - EOS label in IP out |
| # |
| route_33_eos = VppMplsRoute( |
| self, |
| 33, |
| 1, |
| [VppRoutePath(self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[])], |
| ) |
| route_33_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(33)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx) |
| |
| # |
| # disposed packets have an invalid IPv4 checksum |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(33)], dst_ip=self.pg0.remote_ip4, n=65, chksum=1 |
| ) |
| self.send_and_assert_no_replies(self.pg0, tx, "Invalid Checksum") |
| |
| # |
| # An MPLS xconnect - EOS label in IP out, uniform mode |
| # |
| route_3333_eos = VppMplsRoute( |
| self, |
| 3333, |
| 1, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(3, MplsLspMode.UNIFORM)], |
| ) |
| ], |
| ) |
| route_3333_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(3333, ttl=55, exp=3)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx, ip_ttl=54, ip_dscp=0x60) |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(3333, ttl=66, exp=4)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx, ip_ttl=65, ip_dscp=0x80) |
| |
| # |
| # An MPLS xconnect - EOS label in IPv6 out |
| # |
| route_333_eos = VppMplsRoute( |
| self, |
| 333, |
| 1, |
| [VppRoutePath(self.pg0.remote_ip6, self.pg0.sw_if_index, labels=[])], |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6, |
| ) |
| route_333_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(333)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| # |
| # disposed packets have an TTL expired |
| # |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(333, ttl=64)], dst_ip=self.pg1.remote_ip6, hlim=1 |
| ) |
| rx = self.send_and_expect_some(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6_icmp(self.pg0, rx, tx) |
| |
| # |
| # An MPLS xconnect - EOS label in IPv6 out w imp-null |
| # |
| route_334_eos = VppMplsRoute( |
| self, |
| 334, |
| 1, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip6, self.pg0.sw_if_index, labels=[VppMplsLabel(3)] |
| ) |
| ], |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6, |
| ) |
| route_334_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(334, ttl=64)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| # |
| # An MPLS xconnect - EOS label in IPv6 out w imp-null in uniform mode |
| # |
| route_335_eos = VppMplsRoute( |
| self, |
| 335, |
| 1, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip6, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(3, MplsLspMode.UNIFORM)], |
| ) |
| ], |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6, |
| ) |
| route_335_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(335, ttl=27, exp=4)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx, ip_hlim=26, ip_dscp=0x80) |
| |
| # |
| # disposed packets have an TTL expired |
| # |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(334)], dst_ip=self.pg1.remote_ip6, hlim=0 |
| ) |
| rx = self.send_and_expect_some(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6_icmp(self.pg0, rx, tx) |
| |
| # |
| # An MPLS xconnect - non-EOS label in IP out - an invalid configuration |
| # so this traffic should be dropped. |
| # |
| route_33_neos = VppMplsRoute( |
| self, |
| 33, |
| 0, |
| [VppRoutePath(self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[])], |
| ) |
| route_33_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(33), VppMplsLabel(99)] |
| ) |
| self.send_and_assert_no_replies( |
| self.pg0, tx, "MPLS non-EOS packets popped and forwarded" |
| ) |
| |
| # |
| # A recursive EOS x-connect, which resolves through another x-connect |
| # in pipe mode |
| # |
| route_34_eos = VppMplsRoute( |
| self, |
| 34, |
| 1, |
| [ |
| VppRoutePath( |
| "0.0.0.0", |
| 0xFFFFFFFF, |
| nh_via_label=32, |
| labels=[VppMplsLabel(44), VppMplsLabel(45)], |
| ) |
| ], |
| ) |
| route_34_eos.add_vpp_config() |
| self.logger.info(self.vapi.cli("sh mpls fib 34")) |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34, ttl=3)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled( |
| self.pg0, |
| rx, |
| tx, |
| [VppMplsLabel(33), VppMplsLabel(44), VppMplsLabel(45, ttl=2)], |
| ) |
| |
| self.assertEqual(route_34_eos.get_stats_to()["packets"], 257) |
| self.assertEqual(route_32_neos.get_stats_via()["packets"], 257) |
| |
| # |
| # A recursive EOS x-connect, which resolves through another x-connect |
| # in uniform mode |
| # |
| route_35_eos = VppMplsRoute( |
| self, |
| 35, |
| 1, |
| [ |
| VppRoutePath( |
| "0.0.0.0", 0xFFFFFFFF, nh_via_label=42, labels=[VppMplsLabel(44)] |
| ) |
| ], |
| ) |
| route_35_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(35, ttl=3)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled( |
| self.pg0, rx, tx, [VppMplsLabel(43, ttl=2), VppMplsLabel(44, ttl=2)] |
| ) |
| |
| # |
| # A recursive non-EOS x-connect, which resolves through another |
| # x-connect |
| # |
| route_34_neos = VppMplsRoute( |
| self, |
| 34, |
| 0, |
| [ |
| VppRoutePath( |
| "0.0.0.0", |
| 0xFFFFFFFF, |
| nh_via_label=32, |
| labels=[VppMplsLabel(44), VppMplsLabel(46)], |
| ) |
| ], |
| ) |
| route_34_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(34, ttl=45), VppMplsLabel(99)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| # it's the 2nd (counting from 0) label in the stack that is swapped |
| self.verify_capture_labelled( |
| self.pg0, |
| rx, |
| tx, |
| [ |
| VppMplsLabel(33), |
| VppMplsLabel(44), |
| VppMplsLabel(46, ttl=44), |
| VppMplsLabel(99), |
| ], |
| ) |
| |
| # |
| # an recursive IP route that resolves through the recursive non-eos |
| # x-connect |
| # |
| ip_10_0_0_1 = VppIpRoute( |
| self, |
| "10.0.0.1", |
| 32, |
| [ |
| VppRoutePath( |
| "0.0.0.0", 0xFFFFFFFF, nh_via_label=34, labels=[VppMplsLabel(55)] |
| ) |
| ], |
| ) |
| ip_10_0_0_1.add_vpp_config() |
| |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4( |
| self.pg0, |
| rx, |
| tx, |
| [VppMplsLabel(33), VppMplsLabel(44), VppMplsLabel(46), VppMplsLabel(55)], |
| ) |
| self.assertEqual(ip_10_0_0_1.get_stats_to()["packets"], 257) |
| |
| ip_10_0_0_1.remove_vpp_config() |
| route_34_neos.remove_vpp_config() |
| route_34_eos.remove_vpp_config() |
| route_33_neos.remove_vpp_config() |
| route_33_eos.remove_vpp_config() |
| route_32_neos.remove_vpp_config() |
| route_32_eos.remove_vpp_config() |
| |
| def test_bind(self): |
| """MPLS Local Label Binding test""" |
| |
| # |
| # Add a non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute( |
| self, |
| "10.0.0.1", |
| 32, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(45)] |
| ) |
| ], |
| ) |
| route_10_0_0_1.add_vpp_config() |
| |
| # bind a local label to the route |
| binding = VppMplsIpBind(self, 44, "10.0.0.1", 32) |
| binding.add_vpp_config() |
| |
| # non-EOS stream |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(44), VppMplsLabel(99)] |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled( |
| self.pg0, rx, tx, [VppMplsLabel(45, ttl=63), VppMplsLabel(99)] |
| ) |
| |
| # EOS stream |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(44)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, [VppMplsLabel(45, ttl=63)]) |
| |
| # IP stream |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [VppMplsLabel(45)]) |
| |
| # |
| # cleanup |
| # |
| binding.remove_vpp_config() |
| route_10_0_0_1.remove_vpp_config() |
| |
| def test_imposition(self): |
| """MPLS label imposition test""" |
| |
| # |
| # Add a non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute( |
| self, |
| "10.0.0.1", |
| 32, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(32)] |
| ) |
| ], |
| ) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [VppMplsLabel(32)]) |
| |
| # |
| # Add a non-recursive route with a 3 out labels |
| # |
| route_10_0_0_2 = VppIpRoute( |
| self, |
| "10.0.0.2", |
| 32, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(32), VppMplsLabel(33), VppMplsLabel(34)], |
| ) |
| ], |
| ) |
| route_10_0_0_2.add_vpp_config() |
| |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.2", ip_ttl=44, ip_dscp=0xFF) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4( |
| self.pg0, |
| rx, |
| tx, |
| [VppMplsLabel(32), VppMplsLabel(33), VppMplsLabel(34)], |
| ip_ttl=43, |
| ) |
| |
| # |
| # Add a non-recursive route with a single out label in uniform mode |
| # |
| route_10_0_0_3 = VppIpRoute( |
| self, |
| "10.0.0.3", |
| 32, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(32, mode=MplsLspMode.UNIFORM)], |
| ) |
| ], |
| ) |
| route_10_0_0_3.add_vpp_config() |
| |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3", ip_ttl=54, ip_dscp=0xBE) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4( |
| self.pg0, rx, tx, [VppMplsLabel(32, ttl=53, exp=5)] |
| ) |
| |
| # |
| # Add a IPv6 non-recursive route with a single out label in |
| # uniform mode |
| # |
| route_2001_3 = VppIpRoute( |
| self, |
| "2001::3", |
| 128, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip6, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(32, mode=MplsLspMode.UNIFORM)], |
| ) |
| ], |
| ) |
| route_2001_3.add_vpp_config() |
| |
| tx = self.create_stream_ip6(self.pg0, "2001::3", ip_ttl=54, ip_dscp=0xBE) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip6( |
| self.pg0, rx, tx, [VppMplsLabel(32, ttl=53, exp=5)] |
| ) |
| |
| # |
| # add a recursive path, with output label, via the 1 label route |
| # |
| route_11_0_0_1 = VppIpRoute( |
| self, |
| "11.0.0.1", |
| 32, |
| [VppRoutePath("10.0.0.1", 0xFFFFFFFF, labels=[VppMplsLabel(44)])], |
| ) |
| route_11_0_0_1.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 11.0.0.1, should pick up |
| # the label stack for 11.0.0.1 and 10.0.0.1 |
| # |
| tx = self.create_stream_ip4(self.pg0, "11.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4( |
| self.pg0, rx, tx, [VppMplsLabel(32), VppMplsLabel(44)] |
| ) |
| |
| self.assertEqual(route_11_0_0_1.get_stats_to()["packets"], 257) |
| |
| # |
| # add a recursive path, with 2 labels, via the 3 label route |
| # |
| route_11_0_0_2 = VppIpRoute( |
| self, |
| "11.0.0.2", |
| 32, |
| [ |
| VppRoutePath( |
| "10.0.0.2", 0xFFFFFFFF, labels=[VppMplsLabel(44), VppMplsLabel(45)] |
| ) |
| ], |
| ) |
| route_11_0_0_2.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 11.0.0.1, should pick up |
| # the label stack for 11.0.0.1 and 10.0.0.1 |
| # |
| tx = self.create_stream_ip4(self.pg0, "11.0.0.2") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4( |
| self.pg0, |
| rx, |
| tx, |
| [ |
| VppMplsLabel(32), |
| VppMplsLabel(33), |
| VppMplsLabel(34), |
| VppMplsLabel(44), |
| VppMplsLabel(45), |
| ], |
| ) |
| |
| self.assertEqual(route_11_0_0_2.get_stats_to()["packets"], 257) |
| |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4( |
| self.pg0, |
| rx, |
| tx, |
| [ |
| VppMplsLabel(32), |
| VppMplsLabel(33), |
| VppMplsLabel(34), |
| VppMplsLabel(44), |
| VppMplsLabel(45), |
| ], |
| ) |
| |
| self.assertEqual(route_11_0_0_2.get_stats_to()["packets"], 514) |
| |
| # |
| # cleanup |
| # |
| route_11_0_0_2.remove_vpp_config() |
| route_11_0_0_1.remove_vpp_config() |
| route_10_0_0_2.remove_vpp_config() |
| route_10_0_0_1.remove_vpp_config() |
| |
| def test_imposition_fragmentation(self): |
| """MPLS label imposition fragmentation test""" |
| |
| # |
| # Add a ipv4 non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute( |
| self, |
| "10.0.0.1", |
| 32, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(32)] |
| ) |
| ], |
| ) |
| route_10_0_0_1.add_vpp_config() |
| route_1000_1 = VppIpRoute( |
| self, |
| "1000::1", |
| 128, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip6, self.pg0.sw_if_index, labels=[VppMplsLabel(32)] |
| ) |
| ], |
| ) |
| route_1000_1.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| for i in range(0, 257): |
| self.extend_packet(tx[i], 10000) |
| |
| # |
| # 5 fragments per packet (257*5=1285) |
| # |
| rx = self.send_and_expect(self.pg0, tx, self.pg0, 1285) |
| self.verify_capture_fragmented_labelled_ip4( |
| self.pg0, rx, tx, [VppMplsLabel(32)] |
| ) |
| |
| # packets with DF bit set generate ICMP |
| for t in tx: |
| t[IP].flags = "DF" |
| rxs = self.send_and_expect_some(self.pg0, tx, self.pg0) |
| |
| for rx in rxs: |
| self.assertEqual(icmptypes[rx[ICMP].type], "dest-unreach") |
| self.assertEqual( |
| icmpcodes[rx[ICMP].type][rx[ICMP].code], "fragmentation-needed" |
| ) |
| # the link MTU is 9000, the MPLS over head is 4 bytes |
| self.assertEqual(rx[ICMP].nexthopmtu, 9000 - 4) |
| |
| self.assertEqual( |
| self.statistics.get_err_counter("/err/mpls-frag/dont_fragment_set"), |
| len(tx), |
| ) |
| # |
| # a stream that matches the route for 1000::1/128 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_ip6(self.pg0, "1000::1") |
| for i in range(0, 257): |
| self.extend_packet(tx[i], 10000) |
| |
| rxs = self.send_and_expect_some(self.pg0, tx, self.pg0) |
| for rx in rxs: |
| self.assertEqual(rx[ICMPv6PacketTooBig].mtu, 9000 - 4) |
| |
| # |
| # cleanup |
| # |
| route_10_0_0_1.remove_vpp_config() |
| |
| def test_tunnel_pipe(self): |
| """MPLS Tunnel Tests - Pipe""" |
| |
| # |
| # Create a tunnel with two out labels |
| # |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(44), VppMplsLabel(46)], |
| ) |
| ], |
| ) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute( |
| self, "10.0.0.3", 32, [VppRoutePath("0.0.0.0", mpls_tun._sw_if_index)] |
| ) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4( |
| self.pg0, rx, tx, [VppMplsLabel(44), VppMplsLabel(46)] |
| ) |
| |
| # |
| # add a labelled route through the new tunnel |
| # |
| route_10_0_0_4 = VppIpRoute( |
| self, |
| "10.0.0.4", |
| 32, |
| [VppRoutePath("0.0.0.0", mpls_tun._sw_if_index, labels=[33])], |
| ) |
| route_10_0_0_4.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.4") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4( |
| self.pg0, |
| rx, |
| tx, |
| [VppMplsLabel(44), VppMplsLabel(46), VppMplsLabel(33, ttl=255)], |
| ) |
| |
| # |
| # change tunnel's MTU to a low value |
| # |
| mpls_tun.set_l3_mtu(1200) |
| |
| # send IP into the tunnel to be fragmented |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3", payload_size=1500) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0, len(tx) * 2) |
| |
| fake_tx = [] |
| for p in tx: |
| fake_tx.append(p) |
| fake_tx.append(p) |
| self.verify_capture_tunneled_ip4( |
| self.pg0, rx, fake_tx, [VppMplsLabel(44), VppMplsLabel(46)] |
| ) |
| |
| # send MPLS into the tunnel to be fragmented |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.4", payload_size=1500) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0, len(tx) * 2) |
| |
| fake_tx = [] |
| for p in tx: |
| fake_tx.append(p) |
| fake_tx.append(p) |
| self.verify_capture_tunneled_ip4( |
| self.pg0, |
| rx, |
| fake_tx, |
| [VppMplsLabel(44), VppMplsLabel(46), VppMplsLabel(33, ttl=255)], |
| ) |
| |
| def test_tunnel_uniform(self): |
| """MPLS Tunnel Tests - Uniform""" |
| |
| # |
| # Create a tunnel with a single out label |
| # The label stack is specified here from outer to inner |
| # |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[ |
| VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, MplsLspMode.UNIFORM), |
| ], |
| ) |
| ], |
| ) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute( |
| self, "10.0.0.3", 32, [VppRoutePath("0.0.0.0", mpls_tun._sw_if_index)] |
| ) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3", ip_ttl=24) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4( |
| self.pg0, rx, tx, [VppMplsLabel(44, ttl=32), VppMplsLabel(46, ttl=23)] |
| ) |
| |
| # |
| # add a labelled route through the new tunnel |
| # |
| route_10_0_0_4 = VppIpRoute( |
| self, |
| "10.0.0.4", |
| 32, |
| [ |
| VppRoutePath( |
| "0.0.0.0", mpls_tun._sw_if_index, labels=[VppMplsLabel(33, ttl=47)] |
| ) |
| ], |
| ) |
| route_10_0_0_4.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.4") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4( |
| self.pg0, |
| rx, |
| tx, |
| [ |
| VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, ttl=47), |
| VppMplsLabel(33, ttl=47), |
| ], |
| ) |
| |
| def test_tunnel_ecmp(self): |
| """MPLS Tunnel Tests - ECMP""" |
| |
| # |
| # Create a tunnel with multiple paths and labels |
| # |
| self.pg0.generate_remote_hosts(2) |
| self.pg0.configure_ipv4_neighbors() |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_hosts[0].ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(3)], |
| ), |
| VppRoutePath( |
| self.pg0.remote_hosts[1].ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(44)], |
| ), |
| ], |
| ) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| self.vapi.cli("clear trace") |
| pkts = self.create_stream_ip4( |
| self.pg0, ["10.0.0.%d" % i for i in range(NUM_PKTS)], n=NUM_PKTS |
| ) |
| |
| def send_and_expect_mpls_lb(pkts, path_labels, min_ratio): |
| self.pg0.add_stream(pkts) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| |
| paths = {} |
| for packet in rx: |
| eth = packet[Ether] |
| self.assertEqual(eth.type, 0x8847) |
| |
| mpls = packet[MPLS] |
| labels = [] |
| while True: |
| labels.append(mpls.label) |
| if mpls.s == 1: |
| break |
| mpls = mpls[MPLS].payload |
| self.assertIn(labels, path_labels) |
| |
| key = "{}-{}".format(eth.dst, "-".join(str(i) for i in labels)) |
| paths[key] = paths.get(key, 0) + 1 |
| |
| # |
| # Check distribution over multiple mpls paths |
| # |
| self.assertEqual(len(paths), len(path_labels)) |
| for n in paths.values(): |
| self.assertGreaterEqual(n, NUM_PKTS / len(paths) * min_ratio) |
| |
| # |
| # Add labelled route through the new tunnel, |
| # traffic should be balanced over all tunnel paths only. |
| # |
| route_10_0_0_0 = VppIpRoute( |
| self, |
| "10.0.0.0", |
| 16, |
| [VppRoutePath("0.0.0.0", mpls_tun._sw_if_index, labels=[33])], |
| ) |
| route_10_0_0_0.add_vpp_config() |
| send_and_expect_mpls_lb(pkts, [[33], [44, 33]], 0.85) |
| |
| # |
| # Add labelled multipath route through the new tunnel, |
| # traffic should be balanced over both paths first and |
| # then over all tunnel paths. |
| # |
| route_10_0_0_0 = VppIpRoute( |
| self, |
| "10.0.0.0", |
| 16, |
| [ |
| VppRoutePath("0.0.0.1", mpls_tun._sw_if_index, labels=[33]), |
| VppRoutePath("0.0.0.2", mpls_tun._sw_if_index, labels=[34]), |
| ], |
| ) |
| route_10_0_0_0.add_vpp_config() |
| send_and_expect_mpls_lb(pkts, [[33], [44, 33], [34], [44, 34]], 0.70) |
| |
| def test_mpls_tunnel_many(self): |
| """MPLS Multiple Tunnels""" |
| |
| for ii in range(100): |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[ |
| VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, MplsLspMode.UNIFORM), |
| ], |
| ) |
| ], |
| ) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| for ii in range(100): |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[ |
| VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, MplsLspMode.UNIFORM), |
| ], |
| ) |
| ], |
| is_l2=1, |
| ) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| def test_v4_exp_null(self): |
| """MPLS V4 Explicit NULL test""" |
| |
| # |
| # The first test case has an MPLS TTL of 0 |
| # all packet should be dropped |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(0, ttl=0)]) |
| self.send_and_assert_no_replies(self.pg0, tx, "MPLS TTL=0 packets forwarded") |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(0)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx) |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG1 is in table 1 |
| # we are ensuring the post-pop lookup occurs in the VRF table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg1, [VppMplsLabel(0)]) |
| rx = self.send_and_expect(self.pg1, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| def test_v6_exp_null(self): |
| """MPLS V6 Explicit NULL test""" |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(2)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG1 is in table 1 |
| # we are ensuring the post-pop lookup occurs in the VRF table |
| # |
| tx = self.create_stream_labelled_ip6(self.pg1, [VppMplsLabel(2)]) |
| rx = self.send_and_expect(self.pg1, tx, self.pg1) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| def test_deag(self): |
| """MPLS Deagg""" |
| |
| # |
| # A de-agg route - next-hop lookup in default table |
| # |
| route_34_eos = VppMplsRoute( |
| self, 34, 1, [VppRoutePath("0.0.0.0", 0xFFFFFFFF, nh_table_id=0)] |
| ) |
| route_34_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(34)], ping=1, ip_itf=self.pg0 |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx, ping_resp=1) |
| |
| # |
| # A de-agg route - next-hop lookup in non-default table |
| # |
| route_35_eos = VppMplsRoute( |
| self, 35, 1, [VppRoutePath("0.0.0.0", 0xFFFFFFFF, nh_table_id=1)] |
| ) |
| route_35_eos.add_vpp_config() |
| route_356_eos = VppMplsRoute( |
| self, |
| 356, |
| 1, |
| [VppRoutePath("0::0", 0xFFFFFFFF, nh_table_id=1)], |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6, |
| ) |
| route_356_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the non-default table |
| # PG0 is in the default table. packet arrive labelled in the |
| # default table and egress unlabelled in the non-default |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(35)], ping=1, ip_itf=self.pg1 |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx, ping_resp=1) |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(356)], ping=1, ip_itf=self.pg1 |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip6(self.pg1, rx, tx, ping_resp=1) |
| |
| # |
| # Double pop |
| # |
| route_36_neos = VppMplsRoute(self, 36, 0, [VppRoutePath("0.0.0.0", 0xFFFFFFFF)]) |
| route_36_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(36), VppMplsLabel(35)], ping=1, ip_itf=self.pg1 |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx, ping_resp=1) |
| |
| route_36_neos.remove_vpp_config() |
| route_35_eos.remove_vpp_config() |
| route_34_eos.remove_vpp_config() |
| |
| def test_interface_rx(self): |
| """MPLS Interface Receive""" |
| |
| # |
| # Add a non-recursive route that will forward the traffic |
| # post-interface-rx |
| # |
| route_10_0_0_1 = VppIpRoute( |
| self, |
| "10.0.0.1", |
| 32, |
| table_id=1, |
| paths=[VppRoutePath(self.pg1.remote_ip4, self.pg1.sw_if_index)], |
| ) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an interface-rx on pg1 and matching a route in table 1 |
| # if the packet egresses, then we must have swapped to pg1 |
| # so as to have matched the route in table 1 |
| # |
| route_34_eos = VppMplsRoute( |
| self, |
| 34, |
| 1, |
| [ |
| VppRoutePath( |
| "0.0.0.0", |
| self.pg1.sw_if_index, |
| type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX, |
| ) |
| ], |
| ) |
| route_34_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(34)], dst_ip="10.0.0.1" |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| def test_mcast_mid_point(self): |
| """MPLS Multicast Mid Point""" |
| |
| # |
| # Add a non-recursive route that will forward the traffic |
| # post-interface-rx |
| # |
| route_10_0_0_1 = VppIpRoute( |
| self, |
| "10.0.0.1", |
| 32, |
| table_id=1, |
| paths=[VppRoutePath(self.pg1.remote_ip4, self.pg1.sw_if_index)], |
| ) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # Add a mcast entry that replicate to pg2 and pg3 |
| # and replicate to a interface-rx (like a bud node would) |
| # |
| route_3400_eos = VppMplsRoute( |
| self, |
| 3400, |
| 1, |
| [ |
| VppRoutePath( |
| self.pg2.remote_ip4, |
| self.pg2.sw_if_index, |
| labels=[VppMplsLabel(3401)], |
| ), |
| VppRoutePath( |
| self.pg3.remote_ip4, |
| self.pg3.sw_if_index, |
| labels=[VppMplsLabel(3402)], |
| ), |
| VppRoutePath( |
| "0.0.0.0", |
| self.pg1.sw_if_index, |
| type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX, |
| ), |
| ], |
| is_multicast=1, |
| ) |
| route_3400_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(3400, ttl=64)], n=257, dst_ip="10.0.0.1" |
| ) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(257) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_labelled(self.pg2, rx, tx, [VppMplsLabel(3401, ttl=63)]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_labelled(self.pg3, rx, tx, [VppMplsLabel(3402, ttl=63)]) |
| |
| def test_mcast_head(self): |
| """MPLS Multicast Head-end""" |
| |
| MRouteItfFlags = VppEnum.vl_api_mfib_itf_flags_t |
| MRouteEntryFlags = VppEnum.vl_api_mfib_entry_flags_t |
| |
| # |
| # Create a multicast tunnel with two replications |
| # |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg2.remote_ip4, self.pg2.sw_if_index, labels=[VppMplsLabel(42)] |
| ), |
| VppRoutePath( |
| self.pg3.remote_ip4, self.pg3.sw_if_index, labels=[VppMplsLabel(43)] |
| ), |
| ], |
| is_multicast=1, |
| ) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute( |
| self, "10.0.0.3", 32, [VppRoutePath("0.0.0.0", mpls_tun._sw_if_index)] |
| ) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(42)]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(43)]) |
| |
| # |
| # An an IP multicast route via the tunnel |
| # A (*,G). |
| # one accepting interface, pg0, 1 forwarding interface via the tunnel |
| # |
| route_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", |
| 32, |
| MRouteEntryFlags.MFIB_API_ENTRY_FLAG_NONE, |
| [ |
| VppMRoutePath( |
| self.pg0.sw_if_index, MRouteItfFlags.MFIB_API_ITF_FLAG_ACCEPT |
| ), |
| VppMRoutePath( |
| mpls_tun._sw_if_index, MRouteItfFlags.MFIB_API_ITF_FLAG_FORWARD |
| ), |
| ], |
| ) |
| route_232_1_1_1.add_vpp_config() |
| self.logger.info(self.vapi.cli("sh ip mfib index 0")) |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "232.1.1.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(42)]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(43)]) |
| |
| def test_mcast_ip4_tail(self): |
| """MPLS IPv4 Multicast Tail""" |
| |
| MRouteItfFlags = VppEnum.vl_api_mfib_itf_flags_t |
| MRouteEntryFlags = VppEnum.vl_api_mfib_entry_flags_t |
| |
| # |
| # Add a multicast route that will forward the traffic |
| # post-disposition |
| # |
| route_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", |
| 32, |
| MRouteEntryFlags.MFIB_API_ENTRY_FLAG_NONE, |
| table_id=1, |
| paths=[ |
| VppMRoutePath( |
| self.pg1.sw_if_index, MRouteItfFlags.MFIB_API_ITF_FLAG_FORWARD |
| ) |
| ], |
| ) |
| route_232_1_1_1.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an rpf-id and matching a route in table 1 |
| # if the packet egresses, then we must have matched the route in |
| # table 1 |
| # |
| route_34_eos = VppMplsRoute( |
| self, |
| 34, |
| 1, |
| [VppRoutePath("0.0.0.0", 0xFFFFFFFF, nh_table_id=1, rpf_id=55)], |
| is_multicast=1, |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP4, |
| ) |
| |
| route_34_eos.add_vpp_config() |
| |
| # |
| # Drop due to interface lookup miss |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(34)], dst_ip="232.1.1.1", n=1 |
| ) |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop none") |
| |
| # |
| # set the RPF-ID of the entry to match the input packet's |
| # |
| route_232_1_1_1.update_rpf_id(55) |
| self.logger.info(self.vapi.cli("sh ip mfib index 1 232.1.1.1")) |
| |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(34)], dst_ip="232.1.1.1" |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| # |
| # disposed packets have an invalid IPv4 checksum |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(34)], dst_ip="232.1.1.1", n=65, chksum=1 |
| ) |
| self.send_and_assert_no_replies(self.pg0, tx, "Invalid Checksum") |
| |
| # |
| # set the RPF-ID of the entry to not match the input packet's |
| # |
| route_232_1_1_1.update_rpf_id(56) |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(34)], dst_ip="232.1.1.1" |
| ) |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop 56") |
| |
| def test_mcast_ip6_tail(self): |
| """MPLS IPv6 Multicast Tail""" |
| |
| MRouteItfFlags = VppEnum.vl_api_mfib_itf_flags_t |
| MRouteEntryFlags = VppEnum.vl_api_mfib_entry_flags_t |
| |
| # |
| # Add a multicast route that will forward the traffic |
| # post-disposition |
| # |
| route_ff = VppIpMRoute( |
| self, |
| "::", |
| "ff01::1", |
| 32, |
| MRouteEntryFlags.MFIB_API_ENTRY_FLAG_NONE, |
| table_id=1, |
| paths=[ |
| VppMRoutePath( |
| self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_API_ITF_FLAG_FORWARD, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_IP6, |
| ) |
| ], |
| ) |
| route_ff.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an rpf-id and matching a route in table 1 |
| # if the packet egresses, then we must have matched the route in |
| # table 1 |
| # |
| route_34_eos = VppMplsRoute( |
| self, |
| 34, |
| 1, |
| [VppRoutePath("::", 0xFFFFFFFF, nh_table_id=1, rpf_id=55)], |
| is_multicast=1, |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_IP6, |
| ) |
| |
| route_34_eos.add_vpp_config() |
| |
| # |
| # Drop due to interface lookup miss |
| # |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(34)], dst_ip="ff01::1" |
| ) |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF Miss") |
| |
| # |
| # set the RPF-ID of the entry to match the input packet's |
| # |
| route_ff.update_rpf_id(55) |
| |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(34)], dst_ip="ff01::1" |
| ) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip6(self.pg1, rx, tx) |
| |
| # |
| # disposed packets have hop-limit = 1 |
| # |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(34)], dst_ip="ff01::1", hlim=1 |
| ) |
| rx = self.send_and_expect_some(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6_icmp(self.pg0, rx, tx) |
| |
| # |
| # set the RPF-ID of the entry to not match the input packet's |
| # |
| route_ff.update_rpf_id(56) |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, [VppMplsLabel(34)], dst_ip="ff01::1" |
| ) |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop 56") |
| |
| def test_6pe(self): |
| """MPLS 6PE""" |
| |
| # |
| # Add a non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute( |
| self, |
| "10.0.0.1", |
| 32, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(45)] |
| ) |
| ], |
| ) |
| route_10_0_0_1.add_vpp_config() |
| |
| # bind a local label to the route |
| binding = VppMplsIpBind(self, 44, "10.0.0.1", 32) |
| binding.add_vpp_config() |
| |
| # |
| # a labelled v6 route that resolves through the v4 |
| # |
| route_2001_3 = VppIpRoute( |
| self, |
| "2001::3", |
| 128, |
| [VppRoutePath("10.0.0.1", INVALID_INDEX, labels=[VppMplsLabel(32)])], |
| ) |
| route_2001_3.add_vpp_config() |
| |
| tx = self.create_stream_ip6(self.pg0, "2001::3") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| |
| self.verify_capture_labelled_ip6( |
| self.pg0, rx, tx, [VppMplsLabel(45), VppMplsLabel(32)] |
| ) |
| |
| # |
| # and a v4 recursive via the v6 |
| # |
| route_20_3 = VppIpRoute( |
| self, |
| "20.0.0.3", |
| 32, |
| [VppRoutePath("2001::3", INVALID_INDEX, labels=[VppMplsLabel(99)])], |
| ) |
| route_20_3.add_vpp_config() |
| |
| tx = self.create_stream_ip4(self.pg0, "20.0.0.3") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| |
| self.verify_capture_labelled_ip4( |
| self.pg0, rx, tx, [VppMplsLabel(45), VppMplsLabel(32), VppMplsLabel(99)] |
| ) |
| |
| def test_attached(self): |
| """Attach Routes with Local Label""" |
| |
| # |
| # test that if a local label is associated with an attached/connected |
| # prefix, that we can reach hosts in the prefix. |
| # |
| binding = VppMplsIpBind( |
| self, 44, self.pg0._local_ip4_subnet, self.pg0.local_ip4_prefix_len |
| ) |
| binding.add_vpp_config() |
| |
| tx = ( |
| Ether(src=self.pg1.remote_mac, dst=self.pg1.local_mac) |
| / MPLS(label=44, ttl=64) |
| / IP(src=self.pg0.remote_ip4, dst=self.pg0.remote_ip4) |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| rxs = self.send_and_expect(self.pg0, [tx], self.pg0) |
| for rx in rxs: |
| # if there's an ARP then the label is linked to the glean |
| # which is wrong. |
| self.assertFalse(rx.haslayer(ARP)) |
| # it should be unicasted to the host |
| self.assertEqual(rx[Ether].dst, self.pg0.remote_mac) |
| self.assertEqual(rx[IP].dst, self.pg0.remote_ip4) |
| |
| |
| class TestMPLSDisabled(VppTestCase): |
| """MPLS disabled""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLSDisabled, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLSDisabled, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLSDisabled, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(2)) |
| |
| self.tbl = VppMplsTable(self, 0) |
| self.tbl.add_vpp_config() |
| |
| # PG0 is MPLS enabled |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| self.pg0.enable_mpls() |
| |
| # PG 1 is not MPLS enabled |
| self.pg1.admin_up() |
| |
| def tearDown(self): |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.admin_down() |
| |
| self.pg0.disable_mpls() |
| super(TestMPLSDisabled, self).tearDown() |
| |
| def test_mpls_disabled(self): |
| """MPLS Disabled""" |
| |
| self.logger.info(self.vapi.cli("show mpls interface")) |
| self.logger.info(self.vapi.cli("show mpls interface pg1")) |
| self.logger.info(self.vapi.cli("show mpls interface pg0")) |
| |
| tx = ( |
| Ether(src=self.pg1.remote_mac, dst=self.pg1.local_mac) |
| / MPLS(label=32, ttl=64) |
| / IPv6(src="2001::1", dst=self.pg0.remote_ip6) |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| |
| # |
| # A simple MPLS xconnect - eos label in label out |
| # |
| route_32_eos = VppMplsRoute( |
| self, |
| 32, |
| 1, |
| [VppRoutePath(self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[33])], |
| ) |
| route_32_eos.add_vpp_config() |
| |
| # |
| # PG1 does not forward IP traffic |
| # |
| self.send_and_assert_no_replies(self.pg1, tx, "MPLS disabled") |
| |
| # |
| # MPLS enable PG1 |
| # |
| self.pg1.enable_mpls() |
| |
| self.logger.info(self.vapi.cli("show mpls interface")) |
| self.logger.info(self.vapi.cli("show mpls interface pg1")) |
| |
| # |
| # Now we get packets through |
| # |
| self.pg1.add_stream(tx) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture(1) |
| |
| # |
| # Disable PG1 |
| # |
| self.pg1.disable_mpls() |
| |
| # |
| # PG1 does not forward IP traffic |
| # |
| self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled") |
| self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled") |
| |
| |
| class TestMPLSPIC(VppTestCase): |
| """MPLS Prefix-Independent Convergence (PIC) edge convergence""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLSPIC, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLSPIC, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLSPIC, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| mpls_tbl = VppMplsTable(self, 0) |
| mpls_tbl.add_vpp_config() |
| tbl4 = VppIpTable(self, 1) |
| tbl4.add_vpp_config() |
| tbl6 = VppIpTable(self, 1, is_ip6=1) |
| tbl6.add_vpp_config() |
| |
| # core links |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| self.pg0.enable_mpls() |
| |
| self.pg1.admin_up() |
| self.pg1.config_ip4() |
| self.pg1.resolve_arp() |
| self.pg1.enable_mpls() |
| |
| # VRF (customer facing) link |
| self.pg2.admin_up() |
| self.pg2.set_table_ip4(1) |
| self.pg2.config_ip4() |
| self.pg2.resolve_arp() |
| self.pg2.set_table_ip6(1) |
| self.pg2.config_ip6() |
| self.pg2.resolve_ndp() |
| |
| self.pg3.admin_up() |
| self.pg3.set_table_ip4(1) |
| self.pg3.config_ip4() |
| self.pg3.resolve_arp() |
| self.pg3.set_table_ip6(1) |
| self.pg3.config_ip6() |
| self.pg3.resolve_ndp() |
| |
| def tearDown(self): |
| self.pg0.disable_mpls() |
| self.pg1.disable_mpls() |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.set_table_ip4(0) |
| i.set_table_ip6(0) |
| i.admin_down() |
| super(TestMPLSPIC, self).tearDown() |
| |
| def test_mpls_ibgp_pic(self): |
| """MPLS iBGP Prefix-Independent Convergence (PIC) edge convergence |
| |
| 1) setup many iBGP VPN routes via a pair of iBGP peers. |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw the IGP route to one of these peers. |
| 4) check forwarding continues to the remaining peer |
| """ |
| |
| # |
| # IGP+LDP core routes |
| # |
| core_10_0_0_45 = VppIpRoute( |
| self, |
| "10.0.0.45", |
| 32, |
| [VppRoutePath(self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[45])], |
| ) |
| core_10_0_0_45.add_vpp_config() |
| |
| core_10_0_0_46 = VppIpRoute( |
| self, |
| "10.0.0.46", |
| 32, |
| [VppRoutePath(self.pg1.remote_ip4, self.pg1.sw_if_index, labels=[46])], |
| ) |
| core_10_0_0_46.add_vpp_config() |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| pkts = [] |
| for ii in range(NUM_PKTS): |
| dst = "192.168.1.%d" % ii |
| vpn_routes.append( |
| VppIpRoute( |
| self, |
| dst, |
| 32, |
| [ |
| VppRoutePath( |
| "10.0.0.45", |
| 0xFFFFFFFF, |
| labels=[145], |
| flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_HOST, |
| ), |
| VppRoutePath( |
| "10.0.0.46", |
| 0xFFFFFFFF, |
| labels=[146], |
| flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_HOST, |
| ), |
| ], |
| table_id=1, |
| ) |
| ) |
| vpn_routes[ii].add_vpp_config() |
| |
| pkts.append( |
| Ether(dst=self.pg2.local_mac, src=self.pg2.remote_mac) |
| / IP(src=self.pg2.remote_ip4, dst=dst) |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| |
| # |
| # Send the packet stream (one pkt to each VPN route) |
| # - expect a 50-50 split of the traffic |
| # |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0._get_capture(NUM_PKTS) |
| rx1 = self.pg1._get_capture(NUM_PKTS) |
| |
| # not testing the LB hashing algorithm so we're not concerned |
| # with the split ratio, just as long as neither is 0 |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| self.assertEqual( |
| len(pkts), |
| len(rx0) + len(rx1), |
| "Expected all (%s) packets across both ECMP paths. " |
| "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)), |
| ) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (post-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # Withdraw one of the IGP routes |
| # |
| core_10_0_0_46.remove_vpp_config() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.vapi.ppcli("clear trace") |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0.get_capture(NUM_PKTS) |
| self.assertEqual( |
| len(pkts), |
| len(rx0), |
| "Expected all (%s) packets across single path. " |
| "rx0: %s." % (len(pkts), len(rx0)), |
| ) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| |
| # |
| # packets should still be forwarded through the remaining peer |
| # |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0.get_capture(NUM_PKTS) |
| self.assertEqual( |
| len(pkts), |
| len(rx0), |
| "Expected all (%s) packets across single path. " |
| "rx0: %s." % (len(pkts), len(rx0)), |
| ) |
| |
| # |
| # Add the IGP route back and we return to load-balancing |
| # |
| core_10_0_0_46.add_vpp_config() |
| |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0._get_capture(NUM_PKTS) |
| rx1 = self.pg1._get_capture(NUM_PKTS) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| self.assertEqual( |
| len(pkts), |
| len(rx0) + len(rx1), |
| "Expected all (%s) packets across both ECMP paths. " |
| "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)), |
| ) |
| |
| def test_mpls_ebgp_pic(self): |
| """MPLS eBGP Prefix-Independent Convergence (PIC) edge convergence |
| |
| 1) setup many eBGP VPN routes via a pair of eBGP peers. |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw one eBGP path - expect LB across remaining eBGP |
| """ |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| vpn_bindings = [] |
| pkts = [] |
| for ii in range(NUM_PKTS): |
| dst = "192.168.1.%d" % ii |
| local_label = 1600 + ii |
| vpn_routes.append( |
| VppIpRoute( |
| self, |
| dst, |
| 32, |
| [ |
| VppRoutePath( |
| self.pg2.remote_ip4, |
| 0xFFFFFFFF, |
| nh_table_id=1, |
| flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED, |
| ), |
| VppRoutePath( |
| self.pg3.remote_ip4, |
| 0xFFFFFFFF, |
| nh_table_id=1, |
| flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED, |
| ), |
| ], |
| table_id=1, |
| ) |
| ) |
| vpn_routes[ii].add_vpp_config() |
| |
| vpn_bindings.append( |
| VppMplsIpBind(self, local_label, dst, 32, ip_table_id=1) |
| ) |
| vpn_bindings[ii].add_vpp_config() |
| |
| pkts.append( |
| Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) |
| / MPLS(label=local_label, ttl=64) |
| / IP(src=self.pg0.remote_ip4, dst=dst) |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| |
| # |
| # Send the packet stream (one pkt to each VPN route) |
| # - expect a 50-50 split of the traffic |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(NUM_PKTS) |
| rx1 = self.pg3._get_capture(NUM_PKTS) |
| |
| # not testing the LB hashing algorithm so we're not concerned |
| # with the split ratio, just as long as neither is 0 |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| self.assertEqual( |
| len(pkts), |
| len(rx0) + len(rx1), |
| "Expected all (%s) packets across both ECMP paths. " |
| "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)), |
| ) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (post-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # withdraw the connected prefix on the interface. |
| # |
| self.pg2.unconfig_ip4() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(NUM_PKTS) |
| self.assertEqual( |
| len(pkts), |
| len(rx0), |
| "Expected all (%s) packets across single path. " |
| "rx0: %s." % (len(pkts), len(rx0)), |
| ) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| |
| # |
| # packets should still be forwarded through the remaining peer |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(NUM_PKTS) |
| self.assertEqual( |
| len(pkts), |
| len(rx0), |
| "Expected all (%s) packets across single path. " |
| "rx0: %s." % (len(pkts), len(rx0)), |
| ) |
| |
| # |
| # put the connected routes back |
| # |
| self.pg2.config_ip4() |
| self.pg2.resolve_arp() |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(NUM_PKTS) |
| rx1 = self.pg3._get_capture(NUM_PKTS) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| self.assertEqual( |
| len(pkts), |
| len(rx0) + len(rx1), |
| "Expected all (%s) packets across both ECMP paths. " |
| "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)), |
| ) |
| |
| def test_mpls_v6_ebgp_pic(self): |
| """MPLSv6 eBGP Prefix-Independent Convergence (PIC) edge convergence |
| |
| 1) setup many eBGP VPNv6 routes via a pair of eBGP peers |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw one eBGP path - expect LB across remaining eBGP |
| """ |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| vpn_bindings = [] |
| pkts = [] |
| for ii in range(NUM_PKTS): |
| dst = "3000::%d" % ii |
| local_label = 1600 + ii |
| vpn_routes.append( |
| VppIpRoute( |
| self, |
| dst, |
| 128, |
| [ |
| VppRoutePath( |
| self.pg2.remote_ip6, |
| 0xFFFFFFFF, |
| nh_table_id=1, |
| flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED, |
| ), |
| VppRoutePath( |
| self.pg3.remote_ip6, |
| 0xFFFFFFFF, |
| nh_table_id=1, |
| flags=FibPathFlags.FIB_PATH_FLAG_RESOLVE_VIA_ATTACHED, |
| ), |
| ], |
| table_id=1, |
| ) |
| ) |
| vpn_routes[ii].add_vpp_config() |
| |
| vpn_bindings.append( |
| VppMplsIpBind(self, local_label, dst, 128, ip_table_id=1) |
| ) |
| vpn_bindings[ii].add_vpp_config() |
| |
| pkts.append( |
| Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) |
| / MPLS(label=local_label, ttl=64) |
| / IPv6(src=self.pg0.remote_ip6, dst=dst) |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| self.logger.info(self.vapi.cli("sh ip6 fib %s" % dst)) |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(NUM_PKTS) |
| rx1 = self.pg3._get_capture(NUM_PKTS) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| self.assertEqual( |
| len(pkts), |
| len(rx0) + len(rx1), |
| "Expected all (%s) packets across both ECMP paths. " |
| "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)), |
| ) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (post-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # withdraw the connected prefix on the interface. |
| # and shutdown the interface so the ND cache is flushed. |
| # |
| self.pg2.unconfig_ip6() |
| self.pg2.admin_down() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(NUM_PKTS) |
| self.assertEqual( |
| len(pkts), |
| len(rx0), |
| "Expected all (%s) packets across single path. " |
| "rx0: %s." % (len(pkts), len(rx0)), |
| ) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(NUM_PKTS) |
| self.assertEqual( |
| len(pkts), |
| len(rx0), |
| "Expected all (%s) packets across single path. " |
| "rx0: %s." % (len(pkts), len(rx0)), |
| ) |
| |
| # |
| # put the connected routes back |
| # |
| self.logger.info(self.vapi.cli("sh log")) |
| self.pg2.admin_up() |
| self.pg2.config_ip6() |
| self.pg2.resolve_ndp() |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(NUM_PKTS) |
| rx1 = self.pg3._get_capture(NUM_PKTS) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| self.assertEqual( |
| len(pkts), |
| len(rx0) + len(rx1), |
| "Expected all (%s) packets across both ECMP paths. " |
| "rx0: %s rx1: %s." % (len(pkts), len(rx0), len(rx1)), |
| ) |
| |
| |
| class TestMPLSL2(VppTestCase): |
| """MPLS-L2""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLSL2, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLSL2, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLSL2, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(2)) |
| |
| # create the default MPLS table |
| self.tables = [] |
| tbl = VppMplsTable(self, 0) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| # use pg0 as the core facing interface, don't resolve ARP |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.enable_mpls() |
| |
| # use the other 2 for customer facing L2 links |
| for i in self.pg_interfaces[1:]: |
| i.admin_up() |
| |
| def tearDown(self): |
| for i in self.pg_interfaces[1:]: |
| i.admin_down() |
| |
| self.pg0.disable_mpls() |
| self.pg0.unconfig_ip4() |
| self.pg0.admin_down() |
| super(TestMPLSL2, self).tearDown() |
| |
| def verify_capture_tunneled_ethernet(self, capture, sent, mpls_labels): |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the MPLS TTL is 255 since it enters a new tunnel |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| tx_eth = tx[Ether] |
| rx_eth = Ether(scapy.compat.raw(rx[MPLS].payload)) |
| |
| self.assertEqual(rx_eth.src, tx_eth.src) |
| self.assertEqual(rx_eth.dst, tx_eth.dst) |
| |
| def verify_arp_req(self, rx, smac, sip, dip): |
| ether = rx[Ether] |
| self.assertEqual(ether.dst, "ff:ff:ff:ff:ff:ff") |
| self.assertEqual(ether.src, smac) |
| |
| arp = rx[ARP] |
| self.assertEqual(arp.hwtype, 1) |
| self.assertEqual(arp.ptype, 0x800) |
| self.assertEqual(arp.hwlen, 6) |
| self.assertEqual(arp.plen, 4) |
| self.assertEqual(arp.op, ARP.who_has) |
| self.assertEqual(arp.hwsrc, smac) |
| self.assertEqual(arp.hwdst, "00:00:00:00:00:00") |
| self.assertEqual(arp.psrc, sip) |
| self.assertEqual(arp.pdst, dip) |
| |
| def test_vpws(self): |
| """Virtual Private Wire Service""" |
| |
| # |
| # Create an MPLS tunnel that pushes 1 label |
| # For Ethernet over MPLS the uniform mode is irrelevant since ttl/cos |
| # information is not in the packet, but we test it works anyway |
| # |
| mpls_tun_1 = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(42, MplsLspMode.UNIFORM)], |
| ) |
| ], |
| is_l2=1, |
| ) |
| mpls_tun_1.add_vpp_config() |
| mpls_tun_1.admin_up() |
| |
| # |
| # Create a label entry to for 55 that does L2 input to the tunnel |
| # |
| route_55_eos = VppMplsRoute( |
| self, |
| 55, |
| 1, |
| [ |
| VppRoutePath( |
| "0.0.0.0", |
| mpls_tun_1.sw_if_index, |
| type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET, |
| ) |
| ], |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET, |
| ) |
| route_55_eos.add_vpp_config() |
| |
| # |
| # Cross-connect the tunnel with one of the customers L2 interfaces |
| # |
| self.vapi.sw_interface_set_l2_xconnect( |
| self.pg1.sw_if_index, mpls_tun_1.sw_if_index, enable=1 |
| ) |
| self.vapi.sw_interface_set_l2_xconnect( |
| mpls_tun_1.sw_if_index, self.pg1.sw_if_index, enable=1 |
| ) |
| |
| # |
| # inject a packet from the core |
| # |
| pcore = ( |
| Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) |
| / MPLS(label=55, ttl=64) |
| / Ether(dst="00:00:de:ad:ba:be", src="00:00:de:ad:be:ef") |
| / IP(src="10.10.10.10", dst="11.11.11.11") |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| |
| tx0 = pcore * NUM_PKTS |
| rx0 = self.send_and_expect(self.pg0, tx0, self.pg1) |
| payload = pcore[MPLS].payload |
| |
| self.assertEqual(rx0[0][Ether].dst, payload[Ether].dst) |
| self.assertEqual(rx0[0][Ether].src, payload[Ether].src) |
| |
| # |
| # Inject a packet from the customer/L2 side |
| # there's no resolved ARP entry so the first packet we see should be |
| # an ARP request |
| # |
| tx1 = pcore[MPLS].payload |
| rx1 = self.send_and_expect(self.pg1, [tx1], self.pg0) |
| |
| self.verify_arp_req( |
| rx1[0], self.pg0.local_mac, self.pg0.local_ip4, self.pg0.remote_ip4 |
| ) |
| |
| # |
| # resolve the ARP entries and send again |
| # |
| self.pg0.resolve_arp() |
| tx1 = pcore[MPLS].payload * NUM_PKTS |
| rx1 = self.send_and_expect(self.pg1, tx1, self.pg0) |
| |
| self.verify_capture_tunneled_ethernet(rx1, tx1, [VppMplsLabel(42)]) |
| |
| def test_vpls(self): |
| """Virtual Private LAN Service""" |
| |
| # we skipped this in the setup |
| self.pg0.resolve_arp() |
| |
| # |
| # Create a L2 MPLS tunnels |
| # |
| mpls_tun1 = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(42)] |
| ) |
| ], |
| is_l2=1, |
| ) |
| mpls_tun1.add_vpp_config() |
| mpls_tun1.admin_up() |
| |
| mpls_tun2 = VppMPLSTunnelInterface( |
| self, |
| [ |
| VppRoutePath( |
| self.pg0.remote_ip4, self.pg0.sw_if_index, labels=[VppMplsLabel(43)] |
| ) |
| ], |
| is_l2=1, |
| ) |
| mpls_tun2.add_vpp_config() |
| mpls_tun2.admin_up() |
| |
| # |
| # Create a label entries, 55 and 56, that do L2 input to the tunnel |
| # the latter includes a Psuedo Wire Control Word |
| # |
| route_55_eos = VppMplsRoute( |
| self, |
| 55, |
| 1, |
| [ |
| VppRoutePath( |
| "0.0.0.0", |
| mpls_tun1.sw_if_index, |
| type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET, |
| ) |
| ], |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET, |
| ) |
| |
| route_56_eos = VppMplsRoute( |
| self, |
| 56, |
| 1, |
| [ |
| VppRoutePath( |
| "0.0.0.0", |
| mpls_tun2.sw_if_index, |
| type=FibPathType.FIB_PATH_TYPE_INTERFACE_RX, |
| flags=FibPathFlags.FIB_PATH_FLAG_POP_PW_CW, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET, |
| ) |
| ], |
| eos_proto=FibPathProto.FIB_PATH_NH_PROTO_ETHERNET, |
| ) |
| |
| # move me |
| route_56_eos.add_vpp_config() |
| route_55_eos.add_vpp_config() |
| |
| self.logger.info(self.vapi.cli("sh mpls fib 56")) |
| |
| # |
| # add to tunnel to the customers bridge-domain |
| # |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=mpls_tun1.sw_if_index, bd_id=1 |
| ) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=mpls_tun2.sw_if_index, bd_id=1 |
| ) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.pg1.sw_if_index, bd_id=1 |
| ) |
| |
| # |
| # Packet from host on the customer interface to each host |
| # reachable over the core, and vice-versa |
| # |
| p_cust1 = ( |
| Ether(dst="00:00:de:ad:ba:b1", src="00:00:de:ad:be:ef") |
| / IP(src="10.10.10.10", dst="11.11.11.11") |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| p_cust2 = ( |
| Ether(dst="00:00:de:ad:ba:b2", src="00:00:de:ad:be:ef") |
| / IP(src="10.10.10.10", dst="11.11.11.12") |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| p_core1 = ( |
| Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) |
| / MPLS(label=55, ttl=64) |
| / Ether(src="00:00:de:ad:ba:b1", dst="00:00:de:ad:be:ef") |
| / IP(dst="10.10.10.10", src="11.11.11.11") |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| p_core2 = ( |
| Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) |
| / MPLS(label=56, ttl=64) |
| / Raw(b"\x01" * 4) |
| / Ether(src="00:00:de:ad:ba:b2", dst="00:00:de:ad:be:ef") # PW CW |
| / IP(dst="10.10.10.10", src="11.11.11.12") |
| / UDP(sport=1234, dport=1234) |
| / Raw(b"\xa5" * 100) |
| ) |
| |
| # |
| # The BD is learning, so send in one of each packet to learn |
| # |
| |
| # 2 packets due to BD flooding |
| rx = self.send_and_expect(self.pg1, p_cust1, self.pg0, n_rx=2) |
| rx = self.send_and_expect(self.pg1, p_cust2, self.pg0, n_rx=2) |
| |
| # we've learnt this so expect it be be forwarded not flooded |
| rx = self.send_and_expect(self.pg0, [p_core1], self.pg1) |
| self.assertEqual(rx[0][Ether].dst, p_cust1[Ether].src) |
| self.assertEqual(rx[0][Ether].src, p_cust1[Ether].dst) |
| |
| rx = self.send_and_expect(self.pg0, [p_core2], self.pg1) |
| self.assertEqual(rx[0][Ether].dst, p_cust2[Ether].src) |
| self.assertEqual(rx[0][Ether].src, p_cust2[Ether].dst) |
| |
| # |
| # now a stream in each direction from each host |
| # |
| rx = self.send_and_expect(self.pg1, p_cust1 * NUM_PKTS, self.pg0) |
| self.verify_capture_tunneled_ethernet( |
| rx, p_cust1 * NUM_PKTS, [VppMplsLabel(42)] |
| ) |
| |
| rx = self.send_and_expect(self.pg1, p_cust2 * NUM_PKTS, self.pg0) |
| self.verify_capture_tunneled_ethernet( |
| rx, p_cust2 * NUM_PKTS, [VppMplsLabel(43)] |
| ) |
| |
| rx = self.send_and_expect(self.pg0, p_core1 * NUM_PKTS, self.pg1) |
| rx = self.send_and_expect(self.pg0, p_core2 * NUM_PKTS, self.pg1) |
| |
| # |
| # remove interfaces from customers bridge-domain |
| # |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=mpls_tun1.sw_if_index, bd_id=1, enable=0 |
| ) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=mpls_tun2.sw_if_index, bd_id=1, enable=0 |
| ) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0 |
| ) |
| |
| |
| if __name__ == "__main__": |
| unittest.main(testRunner=VppTestRunner) |