| #!/usr/bin/env python |
| |
| import unittest |
| |
| from framework import VppTestCase, VppTestRunner, running_extended_tests |
| from vpp_ip import DpoProto |
| from vpp_ip_route import VppIpRoute, VppRoutePath, \ |
| VppMplsTable, VppIpMRoute, VppMRoutePath, VppIpTable, \ |
| MRouteEntryFlags, MRouteItfFlags, MPLS_LABEL_INVALID, \ |
| VppMplsLabel, FibPathProto, FibPathType |
| from vpp_bier import BIER_HDR_PAYLOAD, VppBierImp, VppBierDispEntry, \ |
| VppBierDispTable, VppBierTable, VppBierTableID, VppBierRoute |
| from vpp_udp_encap import VppUdpEncap |
| |
| import scapy.compat |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether |
| from scapy.layers.inet import IP, UDP |
| from scapy.layers.inet6 import IPv6 |
| from scapy.contrib.mpls import MPLS |
| from scapy.contrib.bier import BIER, BIERLength, BIFT |
| |
| NUM_PKTS = 67 |
| |
| |
| class TestBFIB(VppTestCase): |
| """ BIER FIB Test Case """ |
| |
| def test_bfib(self): |
| """ BFIB Unit Tests """ |
| error = self.vapi.cli("test bier") |
| |
| if error: |
| self.logger.critical(error) |
| self.assertNotIn("Failed", error) |
| |
| |
| class TestBier(VppTestCase): |
| """ BIER Test Case """ |
| |
| def setUp(self): |
| super(TestBier, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(3)) |
| |
| # create the default MPLS table |
| self.tables = [] |
| tbl = VppMplsTable(self, 0) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| tbl = VppIpTable(self, 10) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| # setup both interfaces |
| for i in self.pg_interfaces: |
| if i == self.pg2: |
| i.set_table_ip4(10) |
| i.admin_up() |
| i.config_ip4() |
| i.resolve_arp() |
| i.enable_mpls() |
| |
| def tearDown(self): |
| for i in self.pg_interfaces: |
| i.disable_mpls() |
| i.unconfig_ip4() |
| i.set_table_ip4(0) |
| i.admin_down() |
| super(TestBier, self).tearDown() |
| |
| def bier_midpoint(self, hdr_len_id, n_bytes, max_bp): |
| """BIER midpoint""" |
| |
| # |
| # Add a BIER table for sub-domain 0, set 0, and BSL 256 |
| # |
| bti = VppBierTableID(0, 0, hdr_len_id) |
| bt = VppBierTable(self, bti, 77) |
| bt.add_vpp_config() |
| |
| # |
| # A packet with no bits set gets dropped |
| # |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| MPLS(label=77, ttl=255) / |
| BIER(length=hdr_len_id) / |
| IPv6(src=self.pg0.remote_ip6, dst=self.pg0.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw()) |
| pkts = [p] |
| |
| self.send_and_assert_no_replies(self.pg0, pkts, |
| "Empty Bit-String") |
| |
| # |
| # Add a BIER route for each bit-position in the table via a different |
| # next-hop. Testing whether the BIER walk and replicate forwarding |
| # function works for all bit posisitons. |
| # |
| nh_routes = [] |
| bier_routes = [] |
| for i in range(1, max_bp+1): |
| nh = "10.0.%d.%d" % (i / 255, i % 255) |
| nh_routes.append( |
| VppIpRoute(self, nh, 32, |
| [VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index, |
| labels=[VppMplsLabel(2000+i)])])) |
| nh_routes[-1].add_vpp_config() |
| |
| bier_routes.append( |
| VppBierRoute(self, bti, i, |
| [VppRoutePath(nh, 0xffffffff, |
| labels=[VppMplsLabel(100+i)])])) |
| bier_routes[-1].add_vpp_config() |
| |
| # |
| # A packet with all bits set gets replicated once for each bit |
| # |
| pkt_sizes = [64, 1400] |
| |
| for pkt_size in pkt_sizes: |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| MPLS(label=77, ttl=255) / |
| BIER(length=hdr_len_id, |
| BitString=scapy.compat.chb(255)*n_bytes) / |
| IPv6(src=self.pg0.remote_ip6, dst=self.pg0.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw(scapy.compat.chb(5) * pkt_size)) |
| pkts = p |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(max_bp) |
| |
| for rxp in rx: |
| # |
| # The packets are not required to be sent in bit-position order |
| # when we setup the routes above we used the bit-position to |
| # construct the out-label. so use that here to determine the BP |
| # |
| olabel = rxp[MPLS] |
| bp = olabel.label - 2000 |
| |
| blabel = olabel[MPLS].payload |
| self.assertEqual(blabel.label, 100+bp) |
| self.assertEqual(blabel.ttl, 254) |
| |
| bier_hdr = blabel[MPLS].payload |
| |
| self.assertEqual(bier_hdr.id, 5) |
| self.assertEqual(bier_hdr.version, 0) |
| self.assertEqual(bier_hdr.length, hdr_len_id) |
| self.assertEqual(bier_hdr.entropy, 0) |
| self.assertEqual(bier_hdr.OAM, 0) |
| self.assertEqual(bier_hdr.RSV, 0) |
| self.assertEqual(bier_hdr.DSCP, 0) |
| self.assertEqual(bier_hdr.Proto, 5) |
| |
| # The bit-string should consist only of the BP given by i. |
| byte_array = [b'\0'] * (n_bytes) |
| byte_val = scapy.compat.chb(1 << (bp - 1) % 8) |
| byte_pos = n_bytes - (((bp - 1) // 8) + 1) |
| byte_array[byte_pos] = byte_val |
| bitstring = b''.join([scapy.compat.chb(x) for x in byte_array]) |
| |
| self.assertEqual(len(bitstring), len(bier_hdr.BitString)) |
| self.assertEqual(bitstring, bier_hdr.BitString) |
| |
| # |
| # cleanup. not strictly necessary, but it's much quicker this way |
| # because the bier_fib_dump and ip_fib_dump will be empty when the |
| # auto-cleanup kicks in |
| # |
| for br in bier_routes: |
| br.remove_vpp_config() |
| for nhr in nh_routes: |
| nhr.remove_vpp_config() |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_midpoint_1024(self): |
| """BIER midpoint BSL:1024""" |
| self.bier_midpoint(BIERLength.BIER_LEN_1024, 128, 1024) |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_midpoint_512(self): |
| """BIER midpoint BSL:512""" |
| self.bier_midpoint(BIERLength.BIER_LEN_512, 64, 512) |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_midpoint_256(self): |
| """BIER midpoint BSL:256""" |
| self.bier_midpoint(BIERLength.BIER_LEN_256, 32, 256) |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_midpoint_128(self): |
| """BIER midpoint BSL:128""" |
| self.bier_midpoint(BIERLength.BIER_LEN_128, 16, 128) |
| |
| def test_bier_midpoint_64(self): |
| """BIER midpoint BSL:64""" |
| self.bier_midpoint(BIERLength.BIER_LEN_64, 8, 64) |
| |
| def test_bier_load_balance(self): |
| """BIER load-balance""" |
| |
| # |
| # Add a BIER table for sub-domain 0, set 0, and BSL 256 |
| # |
| bti = VppBierTableID(0, 0, BIERLength.BIER_LEN_64) |
| bt = VppBierTable(self, bti, 77) |
| bt.add_vpp_config() |
| |
| # |
| # packets with varying entropy |
| # |
| pkts = [] |
| for ii in range(257): |
| pkts.append((Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| MPLS(label=77, ttl=255) / |
| BIER(length=BIERLength.BIER_LEN_64, |
| entropy=ii, |
| BitString=scapy.compat.chb(255)*16) / |
| IPv6(src=self.pg0.remote_ip6, |
| dst=self.pg0.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw())) |
| |
| # |
| # 4 next hops |
| # |
| nhs = [{'ip': "10.0.0.1", 'label': 201}, |
| {'ip': "10.0.0.2", 'label': 202}, |
| {'ip': "10.0.0.3", 'label': 203}, |
| {'ip': "10.0.0.4", 'label': 204}] |
| |
| for nh in nhs: |
| ipr = VppIpRoute( |
| self, nh['ip'], 32, |
| [VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index, |
| labels=[VppMplsLabel(nh['label'])])]) |
| ipr.add_vpp_config() |
| |
| bier_route = VppBierRoute( |
| self, bti, 1, |
| [VppRoutePath(nhs[0]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)]), |
| VppRoutePath(nhs[1]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)])]) |
| bier_route.add_vpp_config() |
| |
| rx = self.send_and_expect(self.pg0, pkts, self.pg1) |
| |
| # |
| # we should have recieved a packet from each neighbor |
| # |
| for nh in nhs[:2]: |
| self.assertTrue(sum(p[MPLS].label == nh['label'] for p in rx)) |
| |
| # |
| # add the other paths |
| # |
| bier_route.update_paths( |
| [VppRoutePath(nhs[0]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)]), |
| VppRoutePath(nhs[1]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)]), |
| VppRoutePath(nhs[2]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)]), |
| VppRoutePath(nhs[3]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)])]) |
| |
| rx = self.send_and_expect(self.pg0, pkts, self.pg1) |
| |
| for nh in nhs: |
| self.assertTrue(sum(p[MPLS].label == nh['label'] for p in rx)) |
| |
| # |
| # remove first two paths |
| # |
| bier_route.remove_path(VppRoutePath(nhs[0]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)])) |
| bier_route.remove_path(VppRoutePath(nhs[1]['ip'], 0xffffffff, |
| labels=[VppMplsLabel(101)])) |
| |
| rx = self.send_and_expect(self.pg0, pkts, self.pg1) |
| for nh in nhs[2:]: |
| self.assertTrue(sum(p[MPLS].label == nh['label'] for p in rx)) |
| |
| # |
| # remove the last of the paths, deleteing the entry |
| # |
| bier_route.remove_all_paths() |
| |
| self.send_and_assert_no_replies(self.pg0, pkts) |
| |
| def test_bier_head(self): |
| """BIER head""" |
| |
| # |
| # Add a BIER table for sub-domain 0, set 0, and BSL 256 |
| # |
| bti = VppBierTableID(0, 0, BIERLength.BIER_LEN_256) |
| bt = VppBierTable(self, bti, 77) |
| bt.add_vpp_config() |
| |
| # |
| # 2 bit positions via two next hops |
| # |
| nh1 = "10.0.0.1" |
| nh2 = "10.0.0.2" |
| ip_route_1 = VppIpRoute(self, nh1, 32, |
| [VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index, |
| labels=[VppMplsLabel(2001)])]) |
| ip_route_2 = VppIpRoute(self, nh2, 32, |
| [VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index, |
| labels=[VppMplsLabel(2002)])]) |
| ip_route_1.add_vpp_config() |
| ip_route_2.add_vpp_config() |
| |
| bier_route_1 = VppBierRoute(self, bti, 1, |
| [VppRoutePath(nh1, 0xffffffff, |
| labels=[VppMplsLabel(101)])]) |
| bier_route_2 = VppBierRoute(self, bti, 2, |
| [VppRoutePath(nh2, 0xffffffff, |
| labels=[VppMplsLabel(102)])]) |
| bier_route_1.add_vpp_config() |
| bier_route_2.add_vpp_config() |
| |
| # |
| # An imposition object with both bit-positions set |
| # |
| bi = VppBierImp(self, bti, 333, scapy.compat.chb(0x3) * 32) |
| bi.add_vpp_config() |
| |
| # |
| # Add a multicast route that will forward into the BIER doamin |
| # |
| route_ing_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| paths=[VppMRoutePath(self.pg0.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_ACCEPT), |
| VppMRoutePath(0xffffffff, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| type=FibPathType.FIB_PATH_TYPE_BIER_IMP, |
| bier_imp=bi.bi_index)]) |
| route_ing_232_1_1_1.add_vpp_config() |
| |
| # |
| # inject an IP packet. We expect it to be BIER encapped and |
| # replicated. |
| # |
| p = (Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| IP(src="1.1.1.1", dst="232.1.1.1") / |
| UDP(sport=1234, dport=1234)) |
| |
| self.pg0.add_stream([p]) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(2) |
| |
| # |
| # Encap Stack is; eth, MPLS, MPLS, BIER |
| # |
| igp_mpls = rx[0][MPLS] |
| self.assertEqual(igp_mpls.label, 2001) |
| self.assertEqual(igp_mpls.ttl, 64) |
| self.assertEqual(igp_mpls.s, 0) |
| bier_mpls = igp_mpls[MPLS].payload |
| self.assertEqual(bier_mpls.label, 101) |
| self.assertEqual(bier_mpls.ttl, 64) |
| self.assertEqual(bier_mpls.s, 1) |
| self.assertEqual(rx[0][BIER].length, 2) |
| |
| igp_mpls = rx[1][MPLS] |
| self.assertEqual(igp_mpls.label, 2002) |
| self.assertEqual(igp_mpls.ttl, 64) |
| self.assertEqual(igp_mpls.s, 0) |
| bier_mpls = igp_mpls[MPLS].payload |
| self.assertEqual(bier_mpls.label, 102) |
| self.assertEqual(bier_mpls.ttl, 64) |
| self.assertEqual(bier_mpls.s, 1) |
| self.assertEqual(rx[0][BIER].length, 2) |
| |
| def test_bier_tail(self): |
| """BIER Tail""" |
| |
| # |
| # Add a BIER table for sub-domain 0, set 0, and BSL 256 |
| # |
| bti = VppBierTableID(0, 0, BIERLength.BIER_LEN_256) |
| bt = VppBierTable(self, bti, 77) |
| bt.add_vpp_config() |
| |
| # |
| # disposition table |
| # |
| bdt = VppBierDispTable(self, 8) |
| bdt.add_vpp_config() |
| |
| # |
| # BIER route in table that's for-us |
| # |
| bier_route_1 = VppBierRoute( |
| self, bti, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| nh_table_id=8)]) |
| bier_route_1.add_vpp_config() |
| |
| # |
| # An entry in the disposition table |
| # |
| bier_de_1 = VppBierDispEntry(self, bdt.id, 99, |
| BIER_HDR_PAYLOAD.BIER_HDR_PROTO_IPV4, |
| FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| "0.0.0.0", 0, rpf_id=8192) |
| bier_de_1.add_vpp_config() |
| |
| # |
| # A multicast route to forward post BIER disposition |
| # |
| route_eg_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| paths=[VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_eg_232_1_1_1.add_vpp_config() |
| route_eg_232_1_1_1.update_rpf_id(8192) |
| |
| # |
| # A packet with all bits set gets spat out to BP:1 |
| # |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| MPLS(label=77, ttl=255) / |
| BIER(length=BIERLength.BIER_LEN_256, |
| BitString=scapy.compat.chb(255)*32, |
| BFRID=99) / |
| IP(src="1.1.1.1", dst="232.1.1.1") / |
| UDP(sport=1234, dport=1234) / |
| Raw()) |
| |
| self.send_and_expect(self.pg0, [p], self.pg1) |
| |
| # |
| # A packet that does not match the Disposition entry gets dropped |
| # |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| MPLS(label=77, ttl=255) / |
| BIER(length=BIERLength.BIER_LEN_256, |
| BitString=scapy.compat.chb(255)*32, |
| BFRID=77) / |
| IP(src="1.1.1.1", dst="232.1.1.1") / |
| UDP(sport=1234, dport=1234) / |
| Raw()) |
| self.send_and_assert_no_replies(self.pg0, p*2, |
| "no matching disposition entry") |
| |
| # |
| # Add the default route to the disposition table |
| # |
| bier_de_2 = VppBierDispEntry(self, bdt.id, 0, |
| BIER_HDR_PAYLOAD.BIER_HDR_PROTO_IPV4, |
| FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| "0.0.0.0", 0, rpf_id=8192) |
| bier_de_2.add_vpp_config() |
| |
| # |
| # now the previous packet is forwarded |
| # |
| self.send_and_expect(self.pg0, [p], self.pg1) |
| |
| # |
| # A multicast route to forward post BIER disposition that needs |
| # a check against sending back into the BIER core |
| # |
| bi = VppBierImp(self, bti, 333, scapy.compat.chb(0x3) * 32) |
| bi.add_vpp_config() |
| |
| route_eg_232_1_1_2 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.2", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| paths=[VppMRoutePath(0xffffffff, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD, |
| proto=DpoProto.DPO_PROTO_BIER, |
| type=FibPathType.FIB_PATH_TYPE_BIER_IMP, |
| bier_imp=bi.bi_index), |
| VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_eg_232_1_1_2.add_vpp_config() |
| route_eg_232_1_1_2.update_rpf_id(8192) |
| |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| MPLS(label=77, ttl=255) / |
| BIER(length=BIERLength.BIER_LEN_256, |
| BitString=scapy.compat.chb(255)*32, |
| BFRID=77) / |
| IP(src="1.1.1.1", dst="232.1.1.2") / |
| UDP(sport=1234, dport=1234) / |
| Raw()) |
| self.send_and_expect(self.pg0, [p], self.pg1) |
| |
| def bier_e2e(self, hdr_len_id, n_bytes, max_bp): |
| """ BIER end-to-end""" |
| |
| # |
| # Add a BIER table for sub-domain 0, set 0, and BSL 256 |
| # |
| bti = VppBierTableID(0, 0, hdr_len_id) |
| bt = VppBierTable(self, bti, 77) |
| bt.add_vpp_config() |
| |
| lowest = [b'\0'] * (n_bytes) |
| lowest[-1] = scapy.compat.chb(1) |
| highest = [b'\0'] * (n_bytes) |
| highest[0] = scapy.compat.chb(128) |
| |
| # |
| # Impostion Sets bit strings |
| # |
| bi_low = VppBierImp(self, bti, 333, lowest) |
| bi_low.add_vpp_config() |
| bi_high = VppBierImp(self, bti, 334, highest) |
| bi_high.add_vpp_config() |
| |
| # |
| # Add a multicast route that will forward into the BIER doamin |
| # |
| route_ing_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| paths=[VppMRoutePath(self.pg0.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_ACCEPT), |
| VppMRoutePath(0xffffffff, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| type=FibPathType.FIB_PATH_TYPE_BIER_IMP, |
| bier_imp=bi_low.bi_index)]) |
| route_ing_232_1_1_1.add_vpp_config() |
| route_ing_232_1_1_2 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.2", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| paths=[VppMRoutePath(self.pg0.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_ACCEPT), |
| VppMRoutePath(0xffffffff, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| type=FibPathType.FIB_PATH_TYPE_BIER_IMP, |
| bier_imp=bi_high.bi_index)]) |
| route_ing_232_1_1_2.add_vpp_config() |
| |
| # |
| # disposition table 8 |
| # |
| bdt = VppBierDispTable(self, 8) |
| bdt.add_vpp_config() |
| |
| # |
| # BIER routes in table that are for-us, resolving through |
| # disp table 8. |
| # |
| bier_route_1 = VppBierRoute( |
| self, bti, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| nh_table_id=8)]) |
| bier_route_1.add_vpp_config() |
| bier_route_max = VppBierRoute( |
| self, bti, max_bp, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| nh_table_id=8)]) |
| bier_route_max.add_vpp_config() |
| |
| # |
| # An entry in the disposition table for sender 333 |
| # lookup in VRF 10 |
| # |
| bier_de_1 = VppBierDispEntry(self, bdt.id, 333, |
| BIER_HDR_PAYLOAD.BIER_HDR_PROTO_IPV4, |
| FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| "0.0.0.0", 10, rpf_id=8192) |
| bier_de_1.add_vpp_config() |
| bier_de_1 = VppBierDispEntry(self, bdt.id, 334, |
| BIER_HDR_PAYLOAD.BIER_HDR_PROTO_IPV4, |
| FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| "0.0.0.0", 10, rpf_id=8193) |
| bier_de_1.add_vpp_config() |
| |
| # |
| # Add a multicast routes that will forward the traffic |
| # post-disposition |
| # |
| route_eg_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| table_id=10, |
| paths=[VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_eg_232_1_1_1.add_vpp_config() |
| route_eg_232_1_1_1.update_rpf_id(8192) |
| route_eg_232_1_1_2 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.2", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| table_id=10, |
| paths=[VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_eg_232_1_1_2.add_vpp_config() |
| route_eg_232_1_1_2.update_rpf_id(8193) |
| |
| # |
| # inject a packet in VRF-0. We expect it to be BIER encapped, |
| # replicated, then hit the disposition and be forwarded |
| # out of VRF 10, i.e. on pg1 |
| # |
| p = (Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| IP(src="1.1.1.1", dst="232.1.1.1") / |
| UDP(sport=1234, dport=1234) / |
| Raw(scapy.compat.chb(5) * 32)) |
| |
| rx = self.send_and_expect(self.pg0, p*NUM_PKTS, self.pg1) |
| |
| self.assertEqual(rx[0][IP].src, "1.1.1.1") |
| self.assertEqual(rx[0][IP].dst, "232.1.1.1") |
| |
| p = (Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| IP(src="1.1.1.1", dst="232.1.1.2") / |
| UDP(sport=1234, dport=1234) / |
| Raw(scapy.compat.chb(5) * 512)) |
| |
| rx = self.send_and_expect(self.pg0, p*NUM_PKTS, self.pg1) |
| self.assertEqual(rx[0][IP].src, "1.1.1.1") |
| self.assertEqual(rx[0][IP].dst, "232.1.1.2") |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_e2e_1024(self): |
| """ BIER end-to-end BSL:1024""" |
| self.bier_e2e(BIERLength.BIER_LEN_1024, 128, 1024) |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_e2e_512(self): |
| """ BIER end-to-end BSL:512""" |
| self.bier_e2e(BIERLength.BIER_LEN_512, 64, 512) |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_e2e_256(self): |
| """ BIER end-to-end BSL:256""" |
| self.bier_e2e(BIERLength.BIER_LEN_256, 32, 256) |
| |
| @unittest.skipUnless(running_extended_tests, "part of extended tests") |
| def test_bier_e2e_128(self): |
| """ BIER end-to-end BSL:128""" |
| self.bier_e2e(BIERLength.BIER_LEN_128, 16, 128) |
| |
| def test_bier_e2e_64(self): |
| """ BIER end-to-end BSL:64""" |
| self.bier_e2e(BIERLength.BIER_LEN_64, 8, 64) |
| |
| def test_bier_head_o_udp(self): |
| """BIER head over UDP""" |
| |
| # |
| # Add a BIER table for sub-domain 1, set 0, and BSL 256 |
| # |
| bti = VppBierTableID(1, 0, BIERLength.BIER_LEN_256) |
| bt = VppBierTable(self, bti, 77) |
| bt.add_vpp_config() |
| |
| # |
| # 1 bit positions via 1 next hops |
| # |
| nh1 = "10.0.0.1" |
| ip_route = VppIpRoute(self, nh1, 32, |
| [VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index, |
| labels=[VppMplsLabel(2001)])]) |
| ip_route.add_vpp_config() |
| |
| udp_encap = VppUdpEncap(self, |
| self.pg0.local_ip4, |
| nh1, |
| 330, 8138) |
| udp_encap.add_vpp_config() |
| |
| bier_route = VppBierRoute( |
| self, bti, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xFFFFFFFF, |
| type=FibPathType.FIB_PATH_TYPE_UDP_ENCAP, |
| next_hop_id=udp_encap.id)]) |
| bier_route.add_vpp_config() |
| |
| # |
| # An 2 imposition objects with all bit-positions set |
| # only use the second, but creating 2 tests with a non-zero |
| # value index in the route add |
| # |
| bi = VppBierImp(self, bti, 333, scapy.compat.chb(0xff) * 32) |
| bi.add_vpp_config() |
| bi2 = VppBierImp(self, bti, 334, scapy.compat.chb(0xff) * 32) |
| bi2.add_vpp_config() |
| |
| # |
| # Add a multicast route that will forward into the BIER doamin |
| # |
| route_ing_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| paths=[VppMRoutePath(self.pg0.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_ACCEPT), |
| VppMRoutePath(0xffffffff, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| type=FibPathType.FIB_PATH_TYPE_BIER_IMP, |
| bier_imp=bi2.bi_index)]) |
| route_ing_232_1_1_1.add_vpp_config() |
| |
| # |
| # inject a packet an IP. We expect it to be BIER and UDP encapped, |
| # |
| p = (Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| IP(src="1.1.1.1", dst="232.1.1.1") / |
| UDP(sport=1234, dport=1234)) |
| |
| self.pg0.add_stream([p]) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(1) |
| |
| # |
| # Encap Stack is, eth, IP, UDP, BIFT, BIER |
| # |
| self.assertEqual(rx[0][IP].src, self.pg0.local_ip4) |
| self.assertEqual(rx[0][IP].dst, nh1) |
| self.assertEqual(rx[0][UDP].sport, 330) |
| self.assertEqual(rx[0][UDP].dport, 8138) |
| self.assertEqual(rx[0][BIFT].bsl, BIERLength.BIER_LEN_256) |
| self.assertEqual(rx[0][BIFT].sd, 1) |
| self.assertEqual(rx[0][BIFT].set, 0) |
| self.assertEqual(rx[0][BIFT].ttl, 64) |
| self.assertEqual(rx[0][BIER].length, 2) |
| |
| def test_bier_tail_o_udp(self): |
| """BIER Tail over UDP""" |
| |
| # |
| # Add a BIER table for sub-domain 0, set 0, and BSL 256 |
| # |
| bti = VppBierTableID(1, 0, BIERLength.BIER_LEN_256) |
| bt = VppBierTable(self, bti, MPLS_LABEL_INVALID) |
| bt.add_vpp_config() |
| |
| # |
| # disposition table |
| # |
| bdt = VppBierDispTable(self, 8) |
| bdt.add_vpp_config() |
| |
| # |
| # BIER route in table that's for-us |
| # |
| bier_route_1 = VppBierRoute( |
| self, bti, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| proto=FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| nh_table_id=8)]) |
| bier_route_1.add_vpp_config() |
| |
| # |
| # An entry in the disposition table |
| # |
| bier_de_1 = VppBierDispEntry(self, bdt.id, 99, |
| BIER_HDR_PAYLOAD.BIER_HDR_PROTO_IPV4, |
| FibPathProto.FIB_PATH_NH_PROTO_BIER, |
| "0.0.0.0", 0, rpf_id=8192) |
| bier_de_1.add_vpp_config() |
| |
| # |
| # A multicast route to forward post BIER disposition |
| # |
| route_eg_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| paths=[VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_eg_232_1_1_1.add_vpp_config() |
| route_eg_232_1_1_1.update_rpf_id(8192) |
| |
| # |
| # A packet with all bits set gets spat out to BP:1 |
| # |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) / |
| UDP(sport=333, dport=8138) / |
| BIFT(sd=1, set=0, bsl=2, ttl=255) / |
| BIER(length=BIERLength.BIER_LEN_256, |
| BitString=scapy.compat.chb(255)*32, |
| BFRID=99) / |
| IP(src="1.1.1.1", dst="232.1.1.1") / |
| UDP(sport=1234, dport=1234) / |
| Raw()) |
| |
| rx = self.send_and_expect(self.pg0, [p], self.pg1) |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |