| /* |
| * Copyright (c) 2018 Cisco and/or its affiliates. |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| /** |
| * @file |
| * @brief NAT66 CLI |
| */ |
| |
| #include <nat/nat66.h> |
| #include <nat/nat.h> |
| #include <vnet/fib/fib_table.h> |
| |
| static clib_error_t * |
| nat66_interface_feature_command_fn (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| vnet_main_t *vnm = vnet_get_main (); |
| clib_error_t *error = 0; |
| u32 sw_if_index; |
| u32 *inside_sw_if_indices = 0; |
| u32 *outside_sw_if_indices = 0; |
| u8 is_add = 1; |
| int i, rv; |
| |
| /* Get a line of input. */ |
| if (!unformat_user (input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "in %U", unformat_vnet_sw_interface, |
| vnm, &sw_if_index)) |
| vec_add1 (inside_sw_if_indices, sw_if_index); |
| else if (unformat (line_input, "out %U", unformat_vnet_sw_interface, |
| vnm, &sw_if_index)) |
| vec_add1 (outside_sw_if_indices, sw_if_index); |
| else if (unformat (line_input, "del")) |
| is_add = 0; |
| else |
| { |
| error = clib_error_return (0, "unknown input '%U'", |
| format_unformat_error, line_input); |
| goto done; |
| } |
| } |
| |
| if (vec_len (inside_sw_if_indices)) |
| { |
| for (i = 0; i < vec_len (inside_sw_if_indices); i++) |
| { |
| sw_if_index = inside_sw_if_indices[i]; |
| rv = nat66_interface_add_del (sw_if_index, 1, is_add); |
| switch (rv) |
| { |
| case VNET_API_ERROR_NO_SUCH_ENTRY: |
| error = |
| clib_error_return (0, "%U NAT66 feature not enabled.", |
| format_vnet_sw_interface_name, vnm, |
| vnet_get_sw_interface (vnm, sw_if_index)); |
| goto done; |
| case VNET_API_ERROR_VALUE_EXIST: |
| error = |
| clib_error_return (0, "%U NAT66 feature already enabled.", |
| format_vnet_sw_interface_name, vnm, |
| vnet_get_sw_interface (vnm, sw_if_index)); |
| goto done; |
| case VNET_API_ERROR_INVALID_VALUE: |
| case VNET_API_ERROR_INVALID_VALUE_2: |
| error = |
| clib_error_return (0, |
| "%U NAT66 feature enable/disable failed.", |
| format_vnet_sw_interface_name, vnm, |
| vnet_get_sw_interface (vnm, sw_if_index)); |
| goto done; |
| default: |
| break; |
| |
| } |
| } |
| } |
| |
| if (vec_len (outside_sw_if_indices)) |
| { |
| for (i = 0; i < vec_len (outside_sw_if_indices); i++) |
| { |
| sw_if_index = outside_sw_if_indices[i]; |
| rv = nat66_interface_add_del (sw_if_index, 0, is_add); |
| switch (rv) |
| { |
| case VNET_API_ERROR_NO_SUCH_ENTRY: |
| error = |
| clib_error_return (0, "%U NAT66 feature not enabled.", |
| format_vnet_sw_interface_name, vnm, |
| vnet_get_sw_interface (vnm, sw_if_index)); |
| goto done; |
| case VNET_API_ERROR_VALUE_EXIST: |
| error = |
| clib_error_return (0, "%U NAT66 feature already enabled.", |
| format_vnet_sw_interface_name, vnm, |
| vnet_get_sw_interface (vnm, sw_if_index)); |
| goto done; |
| case VNET_API_ERROR_INVALID_VALUE: |
| case VNET_API_ERROR_INVALID_VALUE_2: |
| error = |
| clib_error_return (0, |
| "%U NAT66 feature enable/disable failed.", |
| format_vnet_sw_interface_name, vnm, |
| vnet_get_sw_interface (vnm, sw_if_index)); |
| goto done; |
| default: |
| break; |
| |
| } |
| } |
| } |
| |
| done: |
| unformat_free (line_input); |
| vec_free (inside_sw_if_indices); |
| vec_free (outside_sw_if_indices); |
| |
| return error; |
| } |
| |
| static int |
| nat66_cli_interface_walk (snat_interface_t * i, void *ctx) |
| { |
| vlib_main_t *vm = ctx; |
| vnet_main_t *vnm = vnet_get_main (); |
| |
| vlib_cli_output (vm, " %U %s", format_vnet_sw_interface_name, vnm, |
| vnet_get_sw_interface (vnm, i->sw_if_index), |
| nat_interface_is_inside (i) ? "in" : "out"); |
| return 0; |
| } |
| |
| static clib_error_t * |
| nat66_show_interfaces_command_fn (vlib_main_t * vm, unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| vlib_cli_output (vm, "NAT66 interfaces:"); |
| nat66_interfaces_walk (nat66_cli_interface_walk, vm); |
| |
| return 0; |
| } |
| |
| static clib_error_t * |
| nat66_add_del_static_mapping_command_fn (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| unformat_input_t _line_input, *line_input = &_line_input; |
| clib_error_t *error = 0; |
| u8 is_add = 1; |
| ip6_address_t l_addr, e_addr; |
| u32 vrf_id = 0; |
| int rv; |
| |
| /* Get a line of input. */ |
| if (!unformat_user (input, unformat_line_input, line_input)) |
| return 0; |
| |
| while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (unformat (line_input, "local %U external %U", |
| unformat_ip6_address, &l_addr, |
| unformat_ip6_address, &e_addr)) |
| ; |
| else if (unformat (line_input, "vrf %u", &vrf_id)) |
| ; |
| else if (unformat (line_input, "del")) |
| is_add = 0; |
| else |
| { |
| error = clib_error_return (0, "unknown input: '%U'", |
| format_unformat_error, line_input); |
| goto done; |
| } |
| } |
| |
| rv = nat66_static_mapping_add_del (&l_addr, &e_addr, vrf_id, is_add); |
| |
| switch (rv) |
| { |
| case VNET_API_ERROR_NO_SUCH_ENTRY: |
| error = clib_error_return (0, "NAT66 static mapping entry not exist."); |
| goto done; |
| case VNET_API_ERROR_VALUE_EXIST: |
| error = clib_error_return (0, "NAT66 static mapping entry exist."); |
| goto done; |
| default: |
| break; |
| } |
| |
| done: |
| unformat_free (line_input); |
| |
| return error; |
| } |
| |
| static int |
| nat66_cli_static_mapping_walk (nat66_static_mapping_t * sm, void *ctx) |
| { |
| nat66_main_t *nm = &nat66_main; |
| vlib_main_t *vm = ctx; |
| fib_table_t *fib; |
| vlib_counter_t vc; |
| |
| fib = fib_table_get (sm->fib_index, FIB_PROTOCOL_IP6); |
| if (!fib) |
| return -1; |
| |
| vlib_get_combined_counter (&nm->session_counters, sm - nm->sm, &vc); |
| |
| vlib_cli_output (vm, " local %U external %U vrf %d", |
| format_ip6_address, &sm->l_addr, |
| format_ip6_address, &sm->e_addr, fib->ft_table_id); |
| vlib_cli_output (vm, " total pkts %lld, total bytes %lld", vc.packets, |
| vc.bytes); |
| |
| return 0; |
| } |
| |
| static clib_error_t * |
| nat66_show_static_mappings_command_fn (vlib_main_t * vm, |
| unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| vlib_cli_output (vm, "NAT66 static mappings:"); |
| nat66_static_mappings_walk (nat66_cli_static_mapping_walk, vm); |
| return 0; |
| } |
| |
| /* *INDENT-OFF* */ |
| /*? |
| * @cliexpar |
| * @cliexstart{set interface nat66} |
| * Enable/disable NAT66 feature on the interface. |
| * To enable NAT66 feature with local (IPv6) network interface |
| * GigabitEthernet0/8/0 and external (IPv4) network interface |
| * GigabitEthernet0/a/0 use: |
| * vpp# set interface nat66 in GigabitEthernet0/8/0 out GigabitEthernet0/a/0 |
| * @cliexend |
| ?*/ |
| VLIB_CLI_COMMAND (set_interface_nat66_command, static) = { |
| .path = "set interface nat66", |
| .short_help = "set interface nat66 in|out <intfc> [del]", |
| .function = nat66_interface_feature_command_fn, |
| }; |
| |
| /*? |
| * @cliexpar |
| * @cliexstart{show nat66 interfaces} |
| * Show interfaces with NAT66 feature. |
| * To show interfaces with NAT66 feature use: |
| * vpp# show nat66 interfaces |
| * NAT66 interfaces: |
| * GigabitEthernet0/8/0 in |
| * GigabitEthernet0/a/0 out |
| * @cliexend |
| ?*/ |
| VLIB_CLI_COMMAND (show_nat66_interfaces_command, static) = { |
| .path = "show nat66 interfaces", |
| .short_help = "show nat66 interfaces", |
| .function = nat66_show_interfaces_command_fn, |
| }; |
| |
| /*? |
| * @cliexpar |
| * @cliexstart{nat66 add static mapping} |
| * Add/delete NAT66 static mapping entry. |
| * To add NAT66 static mapping entry use: |
| * vpp# nat66 add static mapping local fd01:1::4 external 2001:db8:c000:223:: |
| * vpp# nat66 add static mapping local fd01:1::2 external 2001:db8:c000:221:: vrf 10 |
| * @cliexend |
| ?*/ |
| VLIB_CLI_COMMAND (show_nat66_add_del_static_mapping_command, static) = { |
| .path = "nat66 add static mapping", |
| .short_help = "nat66 add static mapping local <ip6-addr> external <ip6-addr>" |
| " [vfr <table-id>] [del]", |
| .function = nat66_add_del_static_mapping_command_fn, |
| }; |
| |
| /*? |
| * @cliexpar |
| * @cliexstart{show nat66 static mappings} |
| * Show NAT66 static mappings. |
| * To show NAT66 static mappings use: |
| * vpp# show nat66 static mappings |
| * NAT66 static mappings: |
| * local fd01:1::4 external 2001:db8:c000:223:: vrf 0 |
| * local fd01:1::2 external 2001:db8:c000:221:: vrf 10 |
| * @cliexend |
| ?*/ |
| VLIB_CLI_COMMAND (show_nat66_static_mappings_command, static) = { |
| .path = "show nat66 static mappings", |
| .short_help = "show nat66 static mappings", |
| .function = nat66_show_static_mappings_command_fn, |
| }; |
| |
| /* |
| * fd.io coding-style-patch-verification: ON |
| * |
| * Local Variables: |
| * eval: (c-set-style "gnu") |
| * End: |
| */ |