| /* |
| * Copyright (c) 2018 Cisco and/or its affiliates. |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <vcl/vcl_private.h> |
| |
| /* NOTE: _vppcom_main is only used until the heap is allocated. |
| * Do not access it directly -- use vcm which will point to |
| * the heap allocated copy after init. |
| */ |
| static vppcom_main_t _vppcom_main = { |
| .debug = VPPCOM_DEBUG_INIT, |
| .is_init = 0, |
| .my_client_index = ~0 |
| }; |
| |
| vppcom_main_t *vcm = &_vppcom_main; |
| |
| void |
| vppcom_cfg_init (vppcom_cfg_t * vcl_cfg) |
| { |
| ASSERT (vcl_cfg); |
| |
| vcl_cfg->heapsize = (256ULL << 20); |
| vcl_cfg->max_workers = 16; |
| vcl_cfg->vpp_api_q_length = 1024; |
| vcl_cfg->segment_baseva = 0x200000000ULL; |
| vcl_cfg->segment_size = (256 << 20); |
| vcl_cfg->add_segment_size = (128 << 20); |
| vcl_cfg->preallocated_fifo_pairs = 8; |
| vcl_cfg->rx_fifo_size = (1 << 20); |
| vcl_cfg->tx_fifo_size = (1 << 20); |
| vcl_cfg->event_queue_size = 2048; |
| vcl_cfg->listen_queue_size = CLIB_CACHE_LINE_BYTES / sizeof (u32); |
| vcl_cfg->app_timeout = 10 * 60.0; |
| vcl_cfg->session_timeout = 10 * 60.0; |
| vcl_cfg->accept_timeout = 60.0; |
| vcl_cfg->event_ring_size = (128 << 10); |
| vcl_cfg->event_log_path = "/dev/shm"; |
| } |
| |
| #define VCFG_DBG(_lvl, _fmt, _args...) \ |
| { \ |
| if (vcm->debug > _lvl) \ |
| fprintf (stderr, _fmt "\n", ##_args); \ |
| } |
| void |
| vppcom_cfg_heapsize (char *conf_fname) |
| { |
| vppcom_cfg_t *vcl_cfg = &vcm->cfg; |
| FILE *fp; |
| char inbuf[4096]; |
| int argc = 1; |
| char **argv = NULL; |
| char *arg = NULL; |
| char *p; |
| int i; |
| u8 *sizep; |
| u32 size; |
| void *vcl_mem; |
| void *heap; |
| |
| fp = fopen (conf_fname, "r"); |
| if (fp == NULL) |
| { |
| VCFG_DBG (0, "VCL<%d>: using default heapsize %lu (0x%lx)", |
| getpid (), vcl_cfg->heapsize, vcl_cfg->heapsize); |
| goto defaulted; |
| } |
| |
| argv = calloc (1, sizeof (char *)); |
| if (argv == NULL) |
| { |
| VCFG_DBG (0, "VCL<%d>: calloc failed, using default heapsize %lu" |
| " (0x%lx)", getpid (), vcl_cfg->heapsize, vcl_cfg->heapsize); |
| goto defaulted; |
| } |
| |
| while (1) |
| { |
| if (fgets (inbuf, 4096, fp) == 0) |
| break; |
| p = strtok (inbuf, " \t\n"); |
| while (p != NULL) |
| { |
| if (*p == '#') |
| break; |
| argc++; |
| char **tmp = realloc (argv, argc * sizeof (char *)); |
| if (tmp == NULL) |
| { |
| VCFG_DBG (0, "VCL<%d>: realloc failed, using default " |
| "heapsize %lu (0x%lx)", getpid (), |
| vcl_cfg->heapsize, vcl_cfg->heapsize); |
| goto defaulted; |
| } |
| argv = tmp; |
| arg = strndup (p, 1024); |
| if (arg == NULL) |
| { |
| VCFG_DBG (0, "VCL<%d>: strndup failed, using default " |
| "heapsize %ld (0x%lx)", getpid (), |
| vcl_cfg->heapsize, vcl_cfg->heapsize); |
| goto defaulted; |
| } |
| argv[argc - 1] = arg; |
| p = strtok (NULL, " \t\n"); |
| } |
| } |
| |
| fclose (fp); |
| fp = NULL; |
| |
| char **tmp = realloc (argv, (argc + 1) * sizeof (char *)); |
| if (tmp == NULL) |
| { |
| VCFG_DBG (0, "VCL<%d>: realloc failed, using default heapsize %ld " |
| "(0x%lx)", getpid (), vcl_cfg->heapsize, vcl_cfg->heapsize); |
| goto defaulted; |
| } |
| argv = tmp; |
| argv[argc] = NULL; |
| |
| /* |
| * Look for and parse the "heapsize" config parameter. |
| * Manual since none of the clib infra has been bootstrapped yet. |
| * |
| * Format: heapsize <nn>[mM][gG] |
| */ |
| |
| for (i = 1; i < (argc - 1); i++) |
| { |
| if (!strncmp (argv[i], "heapsize", 8)) |
| { |
| sizep = (u8 *) argv[i + 1]; |
| size = 0; |
| while (*sizep >= '0' && *sizep <= '9') |
| { |
| size *= 10; |
| size += *sizep++ - '0'; |
| } |
| if (size == 0) |
| { |
| VCFG_DBG (0, "VCL<%d>: parse error '%s %s', using default " |
| "heapsize %ld (0x%lx)", getpid (), argv[i], |
| argv[i + 1], vcl_cfg->heapsize, vcl_cfg->heapsize); |
| goto defaulted; |
| } |
| |
| if (*sizep == 'g' || *sizep == 'G') |
| vcl_cfg->heapsize = size << 30; |
| else if (*sizep == 'm' || *sizep == 'M') |
| vcl_cfg->heapsize = size << 20; |
| else |
| { |
| VCFG_DBG (0, "VCL<%d>: parse error '%s %s', using default " |
| "heapsize %ld (0x%lx)", getpid (), argv[i], |
| argv[i + 1], vcl_cfg->heapsize, vcl_cfg->heapsize); |
| goto defaulted; |
| } |
| } |
| } |
| |
| defaulted: |
| if (fp != NULL) |
| fclose (fp); |
| if (argv != NULL) |
| free (argv); |
| |
| vcl_mem = mmap (0, vcl_cfg->heapsize, PROT_READ | PROT_WRITE, |
| MAP_SHARED | MAP_ANONYMOUS, -1, 0); |
| if (vcl_mem == MAP_FAILED) |
| { |
| VCFG_DBG (0, "VCL<%d>: ERROR: mmap(0, %ld == 0x%lx, " |
| "PROT_READ | PROT_WRITE,MAP_SHARED | MAP_ANONYMOUS, " |
| "-1, 0) failed!", getpid (), vcl_cfg->heapsize, |
| vcl_cfg->heapsize); |
| ASSERT (vcl_mem != MAP_FAILED); |
| return; |
| } |
| heap = clib_mem_init_thread_safe (vcl_mem, vcl_cfg->heapsize); |
| if (!heap) |
| { |
| fprintf (stderr, "VCL<%d>: ERROR: clib_mem_init() failed!", getpid ()); |
| ASSERT (heap); |
| return; |
| } |
| vcl_mem = clib_mem_alloc (sizeof (_vppcom_main)); |
| if (!vcl_mem) |
| { |
| clib_warning ("VCL<%d>: ERROR: clib_mem_alloc() failed!", getpid ()); |
| ASSERT (vcl_mem); |
| return; |
| } |
| |
| clib_memcpy (vcl_mem, &_vppcom_main, sizeof (_vppcom_main)); |
| vcm = vcl_mem; |
| |
| VCFG_DBG (0, "VCL<%d>: allocated VCL heap = %p, size %ld (0x%lx)", |
| getpid (), heap, vcl_cfg->heapsize, vcl_cfg->heapsize); |
| } |
| |
| void |
| vppcom_cfg_read_file (char *conf_fname) |
| { |
| vppcom_cfg_t *vcl_cfg = &vcm->cfg; |
| int fd; |
| unformat_input_t _input, *input = &_input; |
| unformat_input_t _line_input, *line_input = &_line_input; |
| u8 vc_cfg_input = 0, *chroot_path; |
| struct stat s; |
| u32 uid, gid, q_len; |
| |
| fd = open (conf_fname, O_RDONLY); |
| if (fd < 0) |
| { |
| VCFG_DBG (0, "VCL<%d>: using default configuration.", getpid ()); |
| goto file_done; |
| } |
| |
| if (fstat (fd, &s) < 0) |
| { |
| VCFG_DBG (0, |
| "VCL<%d>: failed to stat `%s', using default configuration", |
| getpid (), conf_fname); |
| goto file_done; |
| } |
| |
| if (!(S_ISREG (s.st_mode) || S_ISLNK (s.st_mode))) |
| { |
| VCFG_DBG (0, "VCL<%d>: not a regular file `%s', using default " |
| "configuration", getpid (), conf_fname); |
| goto file_done; |
| } |
| |
| unformat_init_clib_file (input, fd); |
| |
| while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT) |
| { |
| (void) unformat_user (input, unformat_line_input, line_input); |
| unformat_skip_white_space (line_input); |
| |
| if (unformat (line_input, "vcl {")) |
| { |
| vc_cfg_input = 1; |
| continue; |
| } |
| |
| if (vc_cfg_input) |
| { |
| if (unformat (line_input, "heapsize %lu", &vcl_cfg->heapsize)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured heapsize %lu", getpid (), |
| vcl_cfg->heapsize); |
| } |
| if (unformat (line_input, "max-workers %u", &vcl_cfg->max_workers)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured max-workers %u", getpid (), |
| vcl_cfg->max_workers); |
| } |
| else if (unformat (line_input, "api-prefix %s", &chroot_path)) |
| { |
| vec_terminate_c_string (chroot_path); |
| if (vcl_cfg->vpp_api_filename) |
| vec_free (vcl_cfg->vpp_api_filename); |
| vcl_cfg->vpp_api_filename = format (0, "/%s-vpe-api%c", |
| chroot_path, 0); |
| vl_set_memory_root_path ((char *) chroot_path); |
| |
| VCFG_DBG (0, "VCL<%d>: configured api-prefix (%s) and api " |
| "filename (%s)", getpid (), chroot_path, |
| vcl_cfg->vpp_api_filename); |
| chroot_path = 0; /* Don't vec_free() it! */ |
| } |
| else if (unformat (line_input, "api-socket-name %s", |
| &vcl_cfg->vpp_api_socket_name)) |
| { |
| vec_terminate_c_string (vcl_cfg->vpp_api_socket_name); |
| VCFG_DBG (0, "VCL<%d>: configured api-socket-name (%s)", |
| getpid (), vcl_cfg->vpp_api_socket_name); |
| } |
| else if (unformat (line_input, "vpp-api-q-length %d", &q_len)) |
| { |
| if (q_len < vcl_cfg->vpp_api_q_length) |
| { |
| fprintf (stderr, |
| "VCL<%d>: ERROR: configured vpp-api-q-length " |
| "(%u) is too small! Using default: %u ", getpid (), |
| q_len, vcl_cfg->vpp_api_q_length); |
| } |
| else |
| { |
| vcl_cfg->vpp_api_q_length = q_len; |
| |
| VCFG_DBG (0, "VCL<%d>: configured vpp-api-q-length %u", |
| getpid (), vcl_cfg->vpp_api_q_length); |
| } |
| } |
| else if (unformat (line_input, "uid %d", &uid)) |
| { |
| vl_set_memory_uid (uid); |
| VCFG_DBG (0, "VCL<%d>: configured uid %d", getpid (), uid); |
| } |
| else if (unformat (line_input, "gid %d", &gid)) |
| { |
| vl_set_memory_gid (gid); |
| VCFG_DBG (0, "VCL<%d>: configured gid %d", getpid (), gid); |
| } |
| else if (unformat (line_input, "segment-baseva 0x%x", |
| &vcl_cfg->segment_baseva)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured segment_baseva 0x%lx", |
| getpid (), vcl_cfg->segment_baseva); |
| } |
| else if (unformat (line_input, "segment-size 0x%x", |
| &vcl_cfg->segment_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured segment_size 0x%x (%d)", |
| getpid (), vcl_cfg->segment_size, |
| vcl_cfg->segment_size); |
| } |
| else if (unformat (line_input, "segment-size %d", |
| &vcl_cfg->segment_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured segment_size %d (0x%x)", |
| getpid (), vcl_cfg->segment_size, |
| vcl_cfg->segment_size); |
| } |
| else if (unformat (line_input, "add-segment-size 0x%x", |
| &vcl_cfg->add_segment_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured add_segment_size 0x%x (%d)", |
| getpid (), vcl_cfg->add_segment_size, |
| vcl_cfg->add_segment_size); |
| } |
| else if (unformat (line_input, "add-segment-size %d", |
| &vcl_cfg->add_segment_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured add_segment_size %d (0x%x)", |
| getpid (), vcl_cfg->add_segment_size, |
| vcl_cfg->add_segment_size); |
| } |
| else if (unformat (line_input, "preallocated-fifo-pairs %d", |
| &vcl_cfg->preallocated_fifo_pairs)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured preallocated_fifo_pairs %d " |
| "(0x%x)", getpid (), vcl_cfg->preallocated_fifo_pairs, |
| vcl_cfg->preallocated_fifo_pairs); |
| } |
| else if (unformat (line_input, "rx-fifo-size 0x%lx", |
| &vcl_cfg->rx_fifo_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured rx_fifo_size 0x%x (%d)", |
| getpid (), vcl_cfg->rx_fifo_size, |
| vcl_cfg->rx_fifo_size); |
| } |
| else if (unformat (line_input, "rx-fifo-size %d", |
| &vcl_cfg->rx_fifo_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured rx_fifo_size %d (0x%x)", |
| getpid (), vcl_cfg->rx_fifo_size, |
| vcl_cfg->rx_fifo_size); |
| } |
| else if (unformat (line_input, "tx-fifo-size 0x%lx", |
| &vcl_cfg->tx_fifo_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured tx_fifo_size 0x%x (%d)", |
| getpid (), vcl_cfg->tx_fifo_size, |
| vcl_cfg->tx_fifo_size); |
| } |
| else if (unformat (line_input, "tx-fifo-size %ld", |
| &vcl_cfg->tx_fifo_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured tx_fifo_size %d (0x%x)", |
| getpid (), vcl_cfg->tx_fifo_size, |
| vcl_cfg->tx_fifo_size); |
| } |
| else if (unformat (line_input, "event-queue-size 0x%lx", |
| &vcl_cfg->event_queue_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured event_queue_size 0x%x (%d)", |
| getpid (), vcl_cfg->event_queue_size, |
| vcl_cfg->event_queue_size); |
| } |
| else if (unformat (line_input, "event-queue-size %ld", |
| &vcl_cfg->event_queue_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured event_queue_size %d (0x%x)", |
| getpid (), vcl_cfg->event_queue_size, |
| vcl_cfg->event_queue_size); |
| } |
| else if (unformat (line_input, "listen-queue-size 0x%lx", |
| &vcl_cfg->listen_queue_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured listen_queue_size 0x%x (%u)", |
| getpid (), vcl_cfg->listen_queue_size, |
| vcl_cfg->listen_queue_size); |
| } |
| else if (unformat (line_input, "listen-queue-size %ld", |
| &vcl_cfg->listen_queue_size)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured listen_queue_size %u (0x%x)", |
| getpid (), vcl_cfg->listen_queue_size, |
| vcl_cfg->listen_queue_size); |
| } |
| else if (unformat (line_input, "app-timeout %f", |
| &vcl_cfg->app_timeout)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured app_timeout %f", |
| getpid (), vcl_cfg->app_timeout); |
| } |
| else if (unformat (line_input, "session-timeout %f", |
| &vcl_cfg->session_timeout)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured session_timeout %f", |
| getpid (), vcl_cfg->session_timeout); |
| } |
| else if (unformat (line_input, "accept-timeout %f", |
| &vcl_cfg->accept_timeout)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured accept_timeout %f", |
| getpid (), vcl_cfg->accept_timeout); |
| } |
| else if (unformat (line_input, "app-proxy-transport-tcp")) |
| { |
| vcl_cfg->app_proxy_transport_tcp = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_proxy_transport_tcp (%d)", |
| getpid (), vcl_cfg->app_proxy_transport_tcp); |
| } |
| else if (unformat (line_input, "app-proxy-transport-udp")) |
| { |
| vcl_cfg->app_proxy_transport_udp = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_proxy_transport_udp (%d)", |
| getpid (), vcl_cfg->app_proxy_transport_udp); |
| } |
| else if (unformat (line_input, "app-scope-local")) |
| { |
| vcl_cfg->app_scope_local = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_scope_local (%d)", |
| getpid (), vcl_cfg->app_scope_local); |
| } |
| else if (unformat (line_input, "app-scope-global")) |
| { |
| vcl_cfg->app_scope_global = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_scope_global (%d)", |
| getpid (), vcl_cfg->app_scope_global); |
| } |
| else if (unformat (line_input, "namespace-secret %lu", |
| &vcl_cfg->namespace_secret)) |
| { |
| VCFG_DBG (0, "VCL<%d>: configured namespace_secret %lu (0x%lx)", |
| getpid (), vcl_cfg->namespace_secret, |
| vcl_cfg->namespace_secret); |
| } |
| else if (unformat (line_input, "namespace-id %v", |
| &vcl_cfg->namespace_id)) |
| { |
| u32 max_nsid_vec_len = vcl_max_nsid_len (); |
| u32 nsid_vec_len = vec_len (vcl_cfg->namespace_id); |
| if (nsid_vec_len > max_nsid_vec_len) |
| { |
| _vec_len (vcl_cfg->namespace_id) = max_nsid_vec_len; |
| VCFG_DBG (0, "VCL<%d>: configured namespace_id is too long," |
| " truncated to %d characters!", |
| getpid (), max_nsid_vec_len); |
| } |
| |
| VCFG_DBG (0, "VCL<%d>: configured namespace_id %s", |
| getpid (), (char *) vcl_cfg->namespace_id); |
| } |
| else if (unformat (line_input, "use-mq-eventfd")) |
| { |
| vcl_cfg->use_mq_eventfd = 1; |
| VCFG_DBG (0, "VCL<%d>: configured with mq with eventfd", |
| getpid ()); |
| } |
| else if (unformat (line_input, "}")) |
| { |
| vc_cfg_input = 0; |
| VCFG_DBG (0, "VCL<%d>: completed parsing vppcom config!", |
| getpid ()); |
| goto input_done; |
| } |
| else |
| { |
| if (line_input->buffer[line_input->index] != '#') |
| { |
| clib_warning ("VCL<%d>: Unknown vppcom config option: '%s'", |
| getpid (), (char *) |
| &line_input->buffer[line_input->index]); |
| } |
| } |
| } |
| } |
| |
| input_done: |
| unformat_free (input); |
| |
| file_done: |
| if (fd >= 0) |
| close (fd); |
| } |
| |
| void |
| vppcom_cfg (vppcom_cfg_t * vcl_cfg) |
| { |
| char *conf_fname, *env_var_str; |
| |
| vppcom_cfg_init (vcl_cfg); |
| env_var_str = getenv (VPPCOM_ENV_DEBUG); |
| if (env_var_str) |
| { |
| u32 tmp; |
| if (sscanf (env_var_str, "%u", &tmp) != 1) |
| { |
| VCFG_DBG (0, "VCL<%d>: WARNING: Invalid debug level specified " |
| "in the environment variable " VPPCOM_ENV_DEBUG |
| " (%s)!\n", getpid (), env_var_str); |
| } |
| else |
| { |
| vcm->debug = tmp; |
| VCFG_DBG (0, "VCL<%d>: configured VCL debug level (%u) from " |
| VPPCOM_ENV_DEBUG "!", getpid (), vcm->debug); |
| } |
| } |
| conf_fname = getenv (VPPCOM_ENV_CONF); |
| if (!conf_fname) |
| conf_fname = VPPCOM_CONF_DEFAULT; |
| vppcom_cfg_heapsize (conf_fname); |
| vppcom_cfg_read_file (conf_fname); |
| |
| env_var_str = getenv (VPPCOM_ENV_API_PREFIX); |
| if (env_var_str) |
| { |
| if (vcl_cfg->vpp_api_filename) |
| vec_free (vcl_cfg->vpp_api_filename); |
| vcl_cfg->vpp_api_filename = format (0, "/%s-vpe-api%c", env_var_str, 0); |
| vl_set_memory_root_path ((char *) env_var_str); |
| |
| VCFG_DBG (0, "VCL<%d>: configured api prefix (%s) and filename (%s) " |
| "from " VPPCOM_ENV_API_PREFIX "!", getpid (), env_var_str, |
| vcl_cfg->vpp_api_filename); |
| } |
| env_var_str = getenv (VPPCOM_ENV_APP_NAMESPACE_ID); |
| if (env_var_str) |
| { |
| u32 ns_id_vec_len = strlen (env_var_str); |
| |
| vec_reset_length (vcm->cfg.namespace_id); |
| vec_validate (vcm->cfg.namespace_id, ns_id_vec_len - 1); |
| clib_memcpy (vcm->cfg.namespace_id, env_var_str, ns_id_vec_len); |
| |
| VCFG_DBG (0, "VCL<%d>: configured namespace_id (%s) from " |
| VPPCOM_ENV_APP_NAMESPACE_ID "!", getpid (), |
| (char *) vcm->cfg.namespace_id); |
| } |
| env_var_str = getenv (VPPCOM_ENV_APP_NAMESPACE_SECRET); |
| if (env_var_str) |
| { |
| u64 tmp; |
| if (sscanf (env_var_str, "%lu", &tmp) != 1) |
| { |
| VCFG_DBG (0, "VCL<%d>: WARNING: Invalid namespace secret specified" |
| " in the environment variable " |
| VPPCOM_ENV_APP_NAMESPACE_SECRET " (%s)!\n", getpid (), |
| env_var_str); |
| } |
| else |
| { |
| vcm->cfg.namespace_secret = tmp; |
| VCFG_DBG (0, "VCL<%d>: configured namespace secret (%lu) from " |
| VPPCOM_ENV_APP_NAMESPACE_SECRET "!", getpid (), |
| vcm->cfg.namespace_secret); |
| } |
| } |
| if (getenv (VPPCOM_ENV_APP_PROXY_TRANSPORT_TCP)) |
| { |
| vcm->cfg.app_proxy_transport_tcp = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_proxy_transport_tcp (%u) from " |
| VPPCOM_ENV_APP_PROXY_TRANSPORT_TCP "!", getpid (), |
| vcm->cfg.app_proxy_transport_tcp); |
| } |
| if (getenv (VPPCOM_ENV_APP_PROXY_TRANSPORT_UDP)) |
| { |
| vcm->cfg.app_proxy_transport_udp = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_proxy_transport_udp (%u) from " |
| VPPCOM_ENV_APP_PROXY_TRANSPORT_UDP "!", getpid (), |
| vcm->cfg.app_proxy_transport_udp); |
| } |
| if (getenv (VPPCOM_ENV_APP_SCOPE_LOCAL)) |
| { |
| vcm->cfg.app_scope_local = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_scope_local (%u) from " |
| VPPCOM_ENV_APP_SCOPE_LOCAL "!", getpid (), |
| vcm->cfg.app_scope_local); |
| } |
| if (getenv (VPPCOM_ENV_APP_SCOPE_GLOBAL)) |
| { |
| vcm->cfg.app_scope_global = 1; |
| VCFG_DBG (0, "VCL<%d>: configured app_scope_global (%u) from " |
| VPPCOM_ENV_APP_SCOPE_GLOBAL "!", getpid (), |
| vcm->cfg.app_scope_global); |
| } |
| env_var_str = getenv (VPPCOM_ENV_VPP_API_SOCKET); |
| if (env_var_str) |
| { |
| vcm->cfg.vpp_api_socket_name = format (0, "%s%c", env_var_str, 0); |
| VCFG_DBG (0, "VCL<%d>: configured api-socket-name (%s)", getpid (), |
| vcl_cfg->vpp_api_socket_name); |
| } |
| } |
| |
| /* |
| * fd.io coding-style-patch-verification: ON |
| * |
| * Local Variables: |
| * eval: (c-set-style "gnu") |
| * End: |
| */ |