blob: 20c17aa39b1b53b9a29725ea59a089b6714c5a85 [file] [log] [blame]
/*
* Copyright (c) 2015-2016 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/** \brief add or delete locator_set
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param locator_set_name - locator name
@param locator_num - number of locators
@param locators - LISP locator records
Structure of one locator record is as follows:
define locator_t {
u32 sw_if_index;
u8 priority;
u8 weight;
}
*/
define lisp_add_del_locator_set
{
u32 client_index;
u32 context;
u8 is_add;
u8 locator_set_name[64];
u32 locator_num;
u8 locators[0];
};
/** \brief Reply for locator_set add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
@param ls_index - locator set index
*/
define lisp_add_del_locator_set_reply
{
u32 context;
i32 retval;
u32 ls_index;
};
/** \brief add or delete locator for locator_set
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param locator_set_name - name of locator_set to add/del locator
@param sw_if_index - index of the interface
@param priority - priority of the lisp locator
@param weight - weight of the lisp locator
*/
define lisp_add_del_locator
{
u32 client_index;
u32 context;
u8 is_add;
u8 locator_set_name[64];
u32 sw_if_index;
u8 priority;
u8 weight;
};
/** \brief Reply for locator add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_locator_reply
{
u32 context;
i32 retval;
};
/** \brief add or delete lisp eid-table
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param eid_type:
0 : ipv4
1 : ipv6
2 : mac
@param eid - EID can be ip4, ip6 or mac
@param prefix_len - prefix len
@param locator_set_name - name of locator_set to add/del eid-table
@param vni - virtual network instance
@param key_id
HMAC_NO_KEY 0
HMAC_SHA_1_96 1
HMAC_SHA_256_128 2
@param key - secret key
*/
define lisp_add_del_local_eid
{
u32 client_index;
u32 context;
u8 is_add;
u8 eid_type;
u8 eid[16];
u8 prefix_len;
u8 locator_set_name[64];
u32 vni;
u16 key_id;
u8 key[64];
};
/** \brief Reply for local_eid add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_local_eid_reply
{
u32 context;
i32 retval;
};
/** \brief Add/delete map server
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero; delete otherwise
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - map server IP address
*/
define lisp_add_del_map_server
{
u32 client_index;
u32 context;
u8 is_add;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Reply for lisp_add_del_map_server
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_map_server_reply
{
u32 context;
i32 retval;
};
/** \brief add or delete map-resolver
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
*/
define lisp_add_del_map_resolver
{
u32 client_index;
u32 context;
u8 is_add;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Reply for map_resolver add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_map_resolver_reply
{
u32 context;
i32 retval;
};
/** \brief enable or disable LISP feature
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_en - enable protocol if non-zero, else disable
*/
define lisp_enable_disable
{
u32 client_index;
u32 context;
u8 is_en;
};
/** \brief Reply for gpe enable/disable
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_enable_disable_reply
{
u32 context;
i32 retval;
};
/** \brief configure or disable LISP PITR node
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param ls_name - locator set name
@param is_add - add locator set if non-zero, else disable pitr
*/
define lisp_pitr_set_locator_set
{
u32 client_index;
u32 context;
u8 is_add;
u8 ls_name[64];
};
/** \brief Reply for lisp_pitr_set_locator_set
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_pitr_set_locator_set_reply
{
u32 context;
i32 retval;
};
/** \brief Get state of LISP RLOC probing
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define show_lisp_rloc_probe_state
{
u32 client_index;
u32 context;
};
/** \brief Reply for show_lisp_rloc_probe_state
@param context - returned sender context, to match reply w/ request
@param retval - return code
@param is_enabled - state of RLOC probing
*/
define show_lisp_rloc_probe_state_reply
{
u32 context;
i32 retval;
u8 is_enabled;
};
/** \brief enable/disable LISP RLOC probing
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_enable - enable if non-zero; disable otherwise
*/
define lisp_rloc_probe_enable_disable
{
u32 client_index;
u32 context;
u8 is_enabled;
};
/** \brief Reply for lisp_rloc_probe_enable_disable
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_rloc_probe_enable_disable_reply
{
u32 context;
i32 retval;
};
/** \brief enable/disable LISP map-register
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_enable - enable if non-zero; disable otherwise
*/
define lisp_map_register_enable_disable
{
u32 client_index;
u32 context;
u8 is_enabled;
};
/** \brief Reply for lisp_map_register_enable_disable
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_map_register_enable_disable_reply
{
u32 context;
i32 retval;
};
/** \brief Get state of LISP map-register
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define show_lisp_map_register_state
{
u32 client_index;
u32 context;
};
/** \brief Reply for show_lisp_map_register_state
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define show_lisp_map_register_state_reply
{
u32 context;
i32 retval;
u8 is_enabled;
};
/** \brief set LISP map-request mode. Based on configuration VPP will send
src/dest or just normal destination map requests.
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param mode - new map-request mode. Supported values are:
0 - destination only
1 - source/destaination
*/
define lisp_map_request_mode
{
u32 client_index;
u32 context;
u8 mode;
};
/** \brief Reply for lisp_map_request_mode
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_map_request_mode_reply
{
u32 context;
i32 retval;
};
/** \brief Request for LISP map-request mode
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define show_lisp_map_request_mode
{
u32 client_index;
u32 context;
};
/** \brief Reply for show_lisp_map_request_mode
@param context - returned sender context, to match reply w/ request
@param retval - return code
@param mode - map-request mode
*/
define show_lisp_map_request_mode_reply
{
u32 context;
i32 retval;
u8 mode;
};
/** \brief add or delete remote static mapping
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param is_src_dst - flag indicating src/dst based routing policy
@param del_all - if set, delete all remote mappings
@param vni - virtual network instance
@param action - negative map-reply action
@param eid_type -
0 : ipv4
1 : ipv6
2 : mac
@param deid - dst EID
@param seid - src EID, valid only if is_src_dst is enabled
@param rloc_num - number of remote locators
@param rlocs - remote locator records
Structure of remote locator:
define rloc_t {
u8 is_ip4;
u8 priority;
u8 weight;
u8 addr[16];
}
*/
define lisp_add_del_remote_mapping
{
u32 client_index;
u32 context;
u8 is_add;
u8 is_src_dst;
u8 del_all;
u32 vni;
u8 action;
u8 eid_type;
u8 eid[16];
u8 eid_len;
u8 seid[16];
u8 seid_len;
u32 rloc_num;
u8 rlocs[0];
};
/** \brief Reply for lisp_add_del_remote_mapping
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_remote_mapping_reply
{
u32 context;
i32 retval;
};
/** \brief add or delete LISP adjacency adjacency
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param vni - virtual network instance
@param eid_type -
0 : ipv4
1 : ipv6
2 : mac
@param reid - remote EID
@param leid - local EID
*/
define lisp_add_del_adjacency
{
u32 client_index;
u32 context;
u8 is_add;
u32 vni;
u8 eid_type;
u8 reid[16];
u8 leid[16];
u8 reid_len;
u8 leid_len;
};
/** \brief Reply for lisp_add_del_adjacency
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_adjacency_reply
{
u32 context;
i32 retval;
};
/** \brief add or delete map request itr rlocs
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param locator_set_name - locator set name
*/
define lisp_add_del_map_request_itr_rlocs
{
u32 client_index;
u32 context;
u8 is_add;
u8 locator_set_name[64];
};
/** \brief Reply for lisp_add_del_map_request_itr_rlocs
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_map_request_itr_rlocs_reply
{
u32 context;
i32 retval;
};
/** \brief map/unmap vni/bd_index to vrf
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add or delete mapping
@param dp_table - virtual network id/bridge domain index
@param vrf - vrf
*/
define lisp_eid_table_add_del_map
{
u32 client_index;
u32 context;
u8 is_add;
u32 vni;
u32 dp_table;
u8 is_l2;
};
/** \brief Reply for lisp_eid_table_add_del_map
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_eid_table_add_del_map_reply
{
u32 context;
i32 retval;
};
/** \brief Request for map lisp locator status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param locator_set_index - index of locator_set
@param ls_name - locator set name
@param is_index_set - flag indicating whether ls_name or ls_index is set
*/
define lisp_locator_dump
{
u32 client_index;
u32 context;
u32 ls_index;
u8 ls_name[64];
u8 is_index_set;
};
/** \brief LISP locator_set status
@param local - if is set, then locator is local
@param locator_set_name - name of the locator_set
@param sw_if_index - sw_if_index of the locator
@param priority - locator priority
@param weight - locator weight
*/
define lisp_locator_details
{
u32 context;
u8 local;
u32 sw_if_index;
u8 is_ipv6;
u8 ip_address[16];
u8 priority;
u8 weight;
};
/** \brief LISP locator_set status
@param context - sender context, to match reply w/ request
@param ls_index - locator set index
@param ls_name - name of the locator set
*/
define lisp_locator_set_details
{
u32 context;
u32 ls_index;
u8 ls_name[64];
};
/** \brief Request for locator_set summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param filter - filter type
Supported values:
0: all locator sets
1: local locator sets
2: remote locator sets
*/
define lisp_locator_set_dump
{
u32 client_index;
u32 context;
u8 filter;
};
/** \brief Dump lisp eid-table
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param locator_set_index - index of locator_set, if ~0 then the mapping
is negative
@param action - negative map request action
@param is_local - local if non-zero, else remote
@param eid_type:
0 : ipv4
1 : ipv6
2 : mac
@param is_src_dst - EID is type of source/destination
@param eid - EID can be ip4, ip6 or mac
@param eid_prefix_len - prefix length
@param seid - source EID can be ip4, ip6 or mac
@param seid_prefix_len - source prefix length
@param vni - virtual network instance
@param ttl - time to live
@param authoritative - authoritative
@param key_id
HMAC_NO_KEY 0
HMAC_SHA_1_96 1
HMAC_SHA_256_128 2
@param key - secret key
*/
define lisp_eid_table_details
{
u32 context;
u32 locator_set_index;
u8 action;
u8 is_local;
u8 eid_type;
u8 is_src_dst;
u32 vni;
u8 eid[16];
u8 eid_prefix_len;
u8 seid[16];
u8 seid_prefix_len;
u32 ttl;
u8 authoritative;
u16 key_id;
u8 key[64];
};
/** \brief Request for eid table summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param eid_set - if non-zero request info about specific mapping
@param vni - virtual network instance; valid only if eid_set != 0
@param prefix_length - prefix length if EID is IP address;
valid only if eid_set != 0
@param eid_type - EID type; valid only if eid_set != 0
Supported values:
0: EID is IPv4
1: EID is IPv6
2: EID is ethernet address
@param eid - endpoint identifier
@param filter - filter type;
Support values:
0: all eid
1: local eid
2: remote eid
*/
define lisp_eid_table_dump
{
u32 client_index;
u32 context;
u8 eid_set;
u8 prefix_length;
u32 vni;
u8 eid_type;
u8 eid[16];
u8 filter;
};
/** \brief LISP adjacency
@param eid_type -
0 : ipv4
1 : ipv6
2 : mac
@param reid - remote EID
@param leid - local EID
@param reid_prefix_len - remote EID IP prefix length
@param leid_prefix_len - local EID IP prefix length
*/
typeonly manual_print manual_endian define lisp_adjacency
{
u8 eid_type;
u8 reid[16];
u8 leid[16];
u8 reid_prefix_len;
u8 leid_prefix_len;
};
/** \brief LISP adjacency reply
@param count - number of adjacencies
@param adjacencies - array of adjacencies
*/
manual_endian manual_print define lisp_adjacencies_get_reply
{
u32 context;
i32 retval;
u32 count;
vl_api_lisp_adjacency_t adjacencies[count];
};
/** \brief Request for LISP adjacencies
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vni - filter adjacencies by VNI
*/
define lisp_adjacencies_get
{
u32 client_index;
u32 context;
u32 vni;
};
/** \brief Shows relationship between vni and vrf/bd
@param dp_table - VRF index or bridge domain index
@param vni - vitual network instance
*/
define lisp_eid_table_map_details
{
u32 context;
u32 vni;
u32 dp_table;
};
/** \brief Request for lisp_eid_table_map_details
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_l2 - if set dump vni/bd mappings else vni/vrf
*/
define lisp_eid_table_map_dump
{
u32 client_index;
u32 context;
u8 is_l2;
};
/** \brief Dumps all VNIs used in mappings
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_eid_table_vni_dump
{
u32 client_index;
u32 context;
};
/** \brief reply to lisp_eid_table_vni_dump
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vni - virtual network instance
*/
define lisp_eid_table_vni_details
{
u32 client_index;
u32 context;
u32 vni;
};
/** \brief LISP map resolver status
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
*/
define lisp_map_resolver_details
{
u32 context;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Request for map resolver summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_map_resolver_dump
{
u32 client_index;
u32 context;
};
/** \brief LISP map server details
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
*/
define lisp_map_server_details
{
u32 context;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Request for map server summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_map_server_dump
{
u32 client_index;
u32 context;
};
/** \brief Request for lisp-gpe protocol status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define show_lisp_status
{
u32 client_index;
u32 context;
};
/** \brief Status of lisp, enable or disable
@param context - sender context, to match reply w/ request
@param feature_status - lisp enable if non-zero, else disable
@param gpe_status - lisp enable if non-zero, else disable
*/
define show_lisp_status_reply
{
u32 context;
i32 retval;
u8 feature_status;
u8 gpe_status;
};
/** \brief Get LISP map request itr rlocs status
@param context - sender context, to match reply w/ request
@param locator_set_name - name of the locator_set
*/
define lisp_get_map_request_itr_rlocs
{
u32 client_index;
u32 context;
};
/** \brief Request for map request itr rlocs summary status
*/
define lisp_get_map_request_itr_rlocs_reply
{
u32 context;
i32 retval;
u8 locator_set_name[64];
};
/** \brief Request for lisp pitr status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define show_lisp_pitr
{
u32 client_index;
u32 context;
};
/** \brief Status of lisp pitr, enable or disable
@param context - sender context, to match reply w/ request
@param status - lisp pitr enable if non-zero, else disable
@param locator_set_name - name of the locator_set
*/
define show_lisp_pitr_reply
{
u32 context;
i32 retval;
u8 status;
u8 locator_set_name[64];
};
/*
* Local Variables:
* eval: (c-set-style "gnu")
* End:
*/