| #!/usr/bin/env python3 |
| |
| import binascii |
| import socket |
| from socket import AF_INET, AF_INET6 |
| import sys |
| from dataclasses import dataclass |
| |
| from framework import VppTestCase |
| |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether |
| from scapy.layers.inet import IP, UDP, TCP |
| from scapy.layers.inet6 import IPv6 |
| from util import ppp |
| |
| |
| @dataclass |
| class VarMask: |
| offset: int |
| spec: str |
| |
| |
| @dataclass |
| class VarMatch: |
| offset: int |
| value: int |
| length: int |
| |
| |
| class TestClassifier(VppTestCase): |
| @staticmethod |
| def _resolve_mask_match(mask_match): |
| mask_match = binascii.unhexlify(mask_match) |
| mask_match_len = ((len(mask_match) - 1) // 16 + 1) * 16 |
| mask_match = mask_match + b"\0" * (mask_match_len - len(mask_match)) |
| return mask_match, mask_match_len |
| |
| @classmethod |
| def setUpClass(cls): |
| """ |
| Perform standard class setup (defined by class method setUpClass in |
| class VppTestCase) before running the test case, set test case related |
| variables and configure VPP. |
| """ |
| super(TestClassifier, cls).setUpClass() |
| cls.acl_active_table = "" |
| cls.af = AF_INET |
| |
| def setUp(self): |
| """ |
| Perform test setup before test case. |
| |
| **Config:** |
| - create 4 pg interfaces |
| - untagged pg0/pg1/pg2 interface |
| pg0 -------> pg1 (IP ACL) |
| \ |
| ---> pg2 (MAC ACL)) |
| \ |
| -> pg3 (PBR) |
| - setup interfaces: |
| - put it into UP state |
| - set IPv4/6 addresses |
| - resolve neighbor address using ARP |
| |
| :ivar list interfaces: pg interfaces. |
| :ivar list pg_if_packet_sizes: packet sizes in test. |
| :ivar dict acl_tbl_idx: ACL table index. |
| :ivar int pbr_vrfid: VRF id for PBR test. |
| """ |
| self.reset_packet_infos() |
| super(TestClassifier, self).setUp() |
| if self.af is None: # l2_acl test case |
| return |
| |
| # create 4 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| # packet sizes to test |
| self.pg_if_packet_sizes = [64, 9018] |
| |
| self.interfaces = list(self.pg_interfaces) |
| |
| # ACL & PBR vars |
| self.acl_tbl_idx = {} |
| self.pbr_vrfid = 200 |
| |
| # setup all interfaces |
| for intf in self.interfaces: |
| intf.admin_up() |
| if self.af == AF_INET: |
| intf.config_ip4() |
| intf.resolve_arp() |
| elif self.af == AF_INET6: |
| intf.config_ip6() |
| intf.resolve_ndp() |
| |
| def tearDown(self): |
| """Run standard test teardown and acl related log.""" |
| if self.af is not None and not self.vpp_dead: |
| if self.af == AF_INET: |
| self.logger.info(self.vapi.ppcli("show inacl type ip4")) |
| self.logger.info(self.vapi.ppcli("show outacl type ip4")) |
| elif self.af == AF_INET6: |
| self.logger.info(self.vapi.ppcli("show inacl type ip6")) |
| self.logger.info(self.vapi.ppcli("show outacl type ip6")) |
| |
| self.logger.info(self.vapi.cli("show classify table verbose")) |
| self.logger.info(self.vapi.cli("show ip fib")) |
| self.logger.info(self.vapi.cli("show error")) |
| |
| if self.acl_active_table.endswith("out"): |
| self.output_acl_set_interface( |
| self.pg0, self.acl_tbl_idx.get(self.acl_active_table), 0 |
| ) |
| elif self.acl_active_table != "": |
| self.input_acl_set_interface( |
| self.pg0, self.acl_tbl_idx.get(self.acl_active_table), 0 |
| ) |
| self.acl_active_table = "" |
| |
| for intf in self.interfaces: |
| if self.af == AF_INET: |
| intf.unconfig_ip4() |
| elif self.af == AF_INET6: |
| intf.unconfig_ip6() |
| intf.admin_down() |
| |
| super(TestClassifier, self).tearDown() |
| |
| @staticmethod |
| def build_mac_match(dst_mac="", src_mac="", ether_type=""): |
| """Build MAC ACL match data with hexstring format. |
| |
| :param str dst_mac: source MAC address <x:x:x:x:x:x> |
| :param str src_mac: destination MAC address <x:x:x:x:x:x> |
| :param str ether_type: ethernet type <0-ffff> |
| """ |
| if dst_mac: |
| dst_mac = dst_mac.replace(":", "") |
| if src_mac: |
| src_mac = src_mac.replace(":", "") |
| |
| return ( |
| "{!s:0>12}{!s:0>12}{!s:0>4}".format(dst_mac, src_mac, ether_type) |
| ).rstrip() |
| |
| @staticmethod |
| def build_mac_mask(dst_mac="", src_mac="", ether_type=""): |
| """Build MAC ACL mask data with hexstring format. |
| |
| :param str dst_mac: source MAC address <0-ffffffffffff> |
| :param str src_mac: destination MAC address <0-ffffffffffff> |
| :param str ether_type: ethernet type <0-ffff> |
| """ |
| |
| return ( |
| "{!s:0>12}{!s:0>12}{!s:0>4}".format(dst_mac, src_mac, ether_type) |
| ).rstrip() |
| |
| @staticmethod |
| def build_ip_mask(proto="", src_ip="", dst_ip="", src_port="", dst_port=""): |
| """Build IP ACL mask data with hexstring format. |
| |
| :param str proto: protocol number <0-ff> |
| :param str src_ip: source ip address <0-ffffffff> |
| :param str dst_ip: destination ip address <0-ffffffff> |
| :param str src_port: source port number <0-ffff> |
| :param str dst_port: destination port number <0-ffff> |
| """ |
| |
| return ( |
| "{!s:0>20}{!s:0>12}{!s:0>8}{!s:0>4}{!s:0>4}".format( |
| proto, src_ip, dst_ip, src_port, dst_port |
| ) |
| ).rstrip("0") |
| |
| @staticmethod |
| def build_ip6_mask(nh="", src_ip="", dst_ip="", src_port="", dst_port=""): |
| """Build IPv6 ACL mask data with hexstring format. |
| |
| :param str nh: next header number <0-ff> |
| :param str src_ip: source ip address <0-ffffffff> |
| :param str dst_ip: destination ip address <0-ffffffff> |
| :param str src_port: source port number <0-ffff> |
| :param str dst_port: destination port number <0-ffff> |
| """ |
| |
| return ( |
| "{!s:0>14}{!s:0>34}{!s:0>32}{!s:0>4}{!s:0>4}".format( |
| nh, src_ip, dst_ip, src_port, dst_port |
| ) |
| ).rstrip("0") |
| |
| @staticmethod |
| def build_payload_mask(masks): |
| payload_mask = "" |
| |
| for mask in masks: |
| # offset is specified in bytes, convert to hex format. |
| length = (mask.offset * 2) + len(mask.spec) |
| format_spec = "{!s:0>" + str(length) + "}" |
| payload_mask += format_spec.format(mask.spec) |
| |
| return payload_mask.rstrip("0") |
| |
| @staticmethod |
| def build_ip_match(proto=0, src_ip="", dst_ip="", src_port=0, dst_port=0): |
| """Build IP ACL match data with hexstring format. |
| |
| :param int proto: protocol number with valid option "x" |
| :param str src_ip: source ip address with format of "x.x.x.x" |
| :param str dst_ip: destination ip address with format of "x.x.x.x" |
| :param int src_port: source port number "x" |
| :param int dst_port: destination port number "x" |
| """ |
| if src_ip: |
| src_ip = binascii.hexlify(socket.inet_aton(src_ip)).decode("ascii") |
| if dst_ip: |
| dst_ip = binascii.hexlify(socket.inet_aton(dst_ip)).decode("ascii") |
| |
| return ( |
| "{!s:0>20}{!s:0>12}{!s:0>8}{!s:0>4}{!s:0>4}".format( |
| hex(proto)[2:], src_ip, dst_ip, hex(src_port)[2:], hex(dst_port)[2:] |
| ) |
| ).rstrip("0") |
| |
| @staticmethod |
| def build_ip6_match(nh=0, src_ip="", dst_ip="", src_port=0, dst_port=0): |
| """Build IPv6 ACL match data with hexstring format. |
| |
| :param int nh: next header number with valid option "x" |
| :param str src_ip: source ip6 address with format of "xxx:xxxx::xxxx" |
| :param str dst_ip: destination ip6 address with format of |
| "xxx:xxxx::xxxx" |
| :param int src_port: source port number "x" |
| :param int dst_port: destination port number "x" |
| """ |
| if src_ip: |
| if sys.version_info[0] == 2: |
| src_ip = binascii.hexlify(socket.inet_pton(socket.AF_INET6, src_ip)) |
| else: |
| src_ip = socket.inet_pton(socket.AF_INET6, src_ip).hex() |
| |
| if dst_ip: |
| if sys.version_info[0] == 2: |
| dst_ip = binascii.hexlify(socket.inet_pton(socket.AF_INET6, dst_ip)) |
| else: |
| dst_ip = socket.inet_pton(socket.AF_INET6, dst_ip).hex() |
| |
| return ( |
| "{!s:0>14}{!s:0>34}{!s:0>32}{!s:0>4}{!s:0>4}".format( |
| hex(nh)[2:], src_ip, dst_ip, hex(src_port)[2:], hex(dst_port)[2:] |
| ) |
| ).rstrip("0") |
| |
| @staticmethod |
| def build_payload_match(matches): |
| payload_match = "" |
| |
| for match in matches: |
| sval = str(hex(match.value)[2:]) |
| # offset is specified in bytes, convert to hex format. |
| length = (match.offset + match.length) * 2 |
| |
| format_spec = "{!s:0>" + str(length) + "}" |
| payload_match += format_spec.format(sval) |
| |
| return payload_match.rstrip("0") |
| |
| def create_stream( |
| self, |
| src_if, |
| dst_if, |
| packet_sizes, |
| proto_l=UDP(sport=1234, dport=5678), |
| payload_ex=None, |
| ): |
| """Create input packet stream for defined interfaces. |
| |
| :param VppInterface src_if: Source Interface for packet stream. |
| :param VppInterface dst_if: Destination Interface for packet stream. |
| :param list packet_sizes: packet size to test. |
| :param Scapy proto_l: Required IP protocol. Default protocol is UDP. |
| """ |
| pkts = [] |
| |
| for size in packet_sizes: |
| info = self.create_packet_info(src_if, dst_if) |
| payload = self.info_to_payload(info) |
| |
| # append any additional payload after info |
| if payload_ex is not None: |
| payload += payload_ex |
| |
| if self.af == AF_INET: |
| p = ( |
| Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| / IP(src=src_if.remote_ip4, dst=dst_if.remote_ip4) |
| / proto_l |
| / Raw(payload) |
| ) |
| elif self.af == AF_INET6: |
| p = ( |
| Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| / IPv6(src=src_if.remote_ip6, dst=dst_if.remote_ip6) |
| / proto_l |
| / Raw(payload) |
| ) |
| info.data = p.copy() |
| self.extend_packet(p, size) |
| pkts.append(p) |
| return pkts |
| |
| def verify_capture(self, dst_if, capture, proto_l=UDP): |
| """Verify captured input packet stream for defined interface. |
| |
| :param VppInterface dst_if: Interface to verify captured packet stream. |
| :param list capture: Captured packet stream. |
| :param Scapy proto_l: Required IP protocol. Default protocol is UDP. |
| """ |
| ip_proto = IP |
| if self.af == AF_INET6: |
| ip_proto = IPv6 |
| self.logger.info("Verifying capture on interface %s" % dst_if.name) |
| last_info = dict() |
| for i in self.interfaces: |
| last_info[i.sw_if_index] = None |
| dst_sw_if_index = dst_if.sw_if_index |
| for packet in capture: |
| try: |
| ip_received = packet[ip_proto] |
| proto_received = packet[proto_l] |
| payload_info = self.payload_to_info(packet[Raw]) |
| packet_index = payload_info.index |
| self.assertEqual(payload_info.dst, dst_sw_if_index) |
| self.logger.debug( |
| "Got packet on port %s: src=%u (id=%u)" |
| % (dst_if.name, payload_info.src, packet_index) |
| ) |
| next_info = self.get_next_packet_info_for_interface2( |
| payload_info.src, dst_sw_if_index, last_info[payload_info.src] |
| ) |
| last_info[payload_info.src] = next_info |
| self.assertTrue(next_info is not None) |
| self.assertEqual(packet_index, next_info.index) |
| saved_packet = next_info.data |
| ip_saved = saved_packet[ip_proto] |
| proto_saved = saved_packet[proto_l] |
| # Check standard fields |
| self.assertEqual(ip_received.src, ip_saved.src) |
| self.assertEqual(ip_received.dst, ip_saved.dst) |
| self.assertEqual(proto_received.sport, proto_saved.sport) |
| self.assertEqual(proto_received.dport, proto_saved.dport) |
| except BaseException: |
| self.logger.error(ppp("Unexpected or invalid packet:", packet)) |
| raise |
| for i in self.interfaces: |
| remaining_packet = self.get_next_packet_info_for_interface2( |
| i.sw_if_index, dst_sw_if_index, last_info[i.sw_if_index] |
| ) |
| self.assertTrue( |
| remaining_packet is None, |
| "Interface %s: Packet expected from interface %s " |
| "didn't arrive" % (dst_if.name, i.name), |
| ) |
| |
| def create_classify_table(self, key, mask, data_offset=0, next_table_index=None): |
| """Create Classify Table |
| |
| :param str key: key for classify table (ex, ACL name). |
| :param str mask: mask value for interested traffic. |
| :param int data_offset: |
| :param str next_table_index |
| """ |
| mask_match, mask_match_len = self._resolve_mask_match(mask) |
| r = self.vapi.classify_add_del_table( |
| is_add=1, |
| mask=mask_match, |
| mask_len=mask_match_len, |
| match_n_vectors=(len(mask) - 1) // 32 + 1, |
| miss_next_index=0, |
| current_data_flag=1, |
| current_data_offset=data_offset, |
| next_table_index=next_table_index, |
| ) |
| self.assertIsNotNone(r, "No response msg for add_del_table") |
| self.acl_tbl_idx[key] = r.new_table_index |
| |
| def create_classify_session( |
| self, table_index, match, pbr_option=0, vrfid=0, is_add=1 |
| ): |
| """Create Classify Session |
| |
| :param int table_index: table index to identify classify table. |
| :param str match: matched value for interested traffic. |
| :param int pbr_option: enable/disable PBR feature. |
| :param int vrfid: VRF id. |
| :param int is_add: option to configure classify session. |
| - create(1) or delete(0) |
| """ |
| mask_match, mask_match_len = self._resolve_mask_match(match) |
| r = self.vapi.classify_add_del_session( |
| is_add=is_add, |
| table_index=table_index, |
| match=mask_match, |
| match_len=mask_match_len, |
| opaque_index=0, |
| action=pbr_option, |
| metadata=vrfid, |
| ) |
| self.assertIsNotNone(r, "No response msg for add_del_session") |
| |
| def input_acl_set_interface(self, intf, table_index, is_add=1): |
| """Configure Input ACL interface |
| |
| :param VppInterface intf: Interface to apply Input ACL feature. |
| :param int table_index: table index to identify classify table. |
| :param int is_add: option to configure classify session. |
| - enable(1) or disable(0) |
| """ |
| r = None |
| if self.af == AF_INET: |
| r = self.vapi.input_acl_set_interface( |
| is_add, intf.sw_if_index, ip4_table_index=table_index |
| ) |
| elif self.af == AF_INET6: |
| r = self.vapi.input_acl_set_interface( |
| is_add, intf.sw_if_index, ip6_table_index=table_index |
| ) |
| else: |
| r = self.vapi.input_acl_set_interface( |
| is_add, intf.sw_if_index, l2_table_index=table_index |
| ) |
| self.assertIsNotNone(r, "No response msg for acl_set_interface") |
| |
| def output_acl_set_interface(self, intf, table_index, is_add=1): |
| """Configure Output ACL interface |
| |
| :param VppInterface intf: Interface to apply Output ACL feature. |
| :param int table_index: table index to identify classify table. |
| :param int is_add: option to configure classify session. |
| - enable(1) or disable(0) |
| """ |
| r = None |
| if self.af == AF_INET: |
| r = self.vapi.output_acl_set_interface( |
| is_add, intf.sw_if_index, ip4_table_index=table_index |
| ) |
| elif self.af == AF_INET6: |
| r = self.vapi.output_acl_set_interface( |
| is_add, intf.sw_if_index, ip6_table_index=table_index |
| ) |
| else: |
| r = self.vapi.output_acl_set_interface( |
| is_add, intf.sw_if_index, l2_table_index=table_index |
| ) |
| self.assertIsNotNone(r, "No response msg for acl_set_interface") |
| |
| def config_pbr_fib_entry(self, intf, is_add=1): |
| """Configure fib entry to route traffic toward PBR VRF table |
| |
| :param VppInterface intf: destination interface to be routed for PBR. |
| |
| """ |
| addr_len = 24 |
| self.vapi.ip_add_del_route( |
| dst_address=intf.local_ip4, |
| dst_address_length=addr_len, |
| next_hop_address=intf.remote_ip4, |
| table_id=self.pbr_vrfid, |
| is_add=is_add, |
| ) |
| |
| def verify_vrf(self, vrf_id): |
| """ |
| Check if the FIB table / VRF ID is configured. |
| |
| :param int vrf_id: The FIB table / VRF ID to be verified. |
| :return: 1 if the FIB table / VRF ID is configured, otherwise return 0. |
| """ |
| ip_fib_dump = self.vapi.ip_route_dump(vrf_id, False) |
| vrf_count = len(ip_fib_dump) |
| if vrf_count == 0: |
| self.logger.info("IPv4 VRF ID %d is not configured" % vrf_id) |
| return 0 |
| else: |
| self.logger.info("IPv4 VRF ID %d is configured" % vrf_id) |
| return 1 |