| #!/usr/bin/env python3 |
| """IP6 VRF Multi-instance Test Case HLD: |
| |
| **NOTES:** |
| - higher number of pg-ip6 interfaces causes problems => only 15 pg-ip6 \ |
| interfaces in 5 VRFs are tested |
| - jumbo packets in configuration with 15 pg-ip6 interfaces leads to \ |
| problems too |
| |
| **config 1** |
| - add 15 pg-ip6 interfaces |
| - configure 5 hosts per pg-ip6 interface |
| - configure 4 VRFs |
| - add 3 pg-ip6 interfaces per VRF |
| |
| **test 1** |
| - send IP6 packets between all pg-ip6 interfaces in all VRF groups |
| |
| **verify 1** |
| - check VRF data by parsing output of ip_route_dump API command |
| - all packets received correctly in case of pg-ip6 interfaces in the |
| same VRF |
| - no packet received in case of pg-ip6 interfaces not in VRF |
| - no packet received in case of pg-ip6 interfaces in different VRFs |
| |
| **config 2** |
| - reset 2 VRFs |
| |
| **test 2** |
| - send IP6 packets between all pg-ip6 interfaces in all VRF groups |
| |
| **verify 2** |
| - check VRF data by parsing output of ip_route_dump API command |
| - all packets received correctly in case of pg-ip6 interfaces in the |
| same VRF |
| - no packet received in case of pg-ip6 interfaces not in VRF |
| - no packet received in case of pg-ip6 interfaces in different VRFs |
| |
| **config 3** |
| - add 1 of reset VRFs and 1 new VRF |
| |
| **test 3** |
| - send IP6 packets between all pg-ip6 interfaces in all VRF groups |
| |
| **verify 3** |
| - check VRF data by parsing output of ip_route_dump API command |
| - all packets received correctly in case of pg-ip6 interfaces in the |
| same VRF |
| - no packet received in case of pg-ip6 interfaces not in VRF |
| - no packet received in case of pg-ip6 interfaces in different VRFs |
| |
| **config 4** |
| - reset all VRFs (i.e. no VRF except VRF=0 created) |
| |
| **test 4** |
| - send IP6 packets between all pg-ip6 interfaces in all VRF groups |
| |
| **verify 4** |
| - check VRF data by parsing output of ip_route_dump API command |
| - all packets received correctly in case of pg-ip6 interfaces in the |
| same VRF |
| - no packet received in case of pg-ip6 interfaces not in VRF |
| - no packet received in case of pg-ip6 interfaces in different VRFs |
| """ |
| |
| import unittest |
| import random |
| |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether |
| from scapy.layers.inet6 import ( |
| UDP, |
| IPv6, |
| ICMPv6ND_NS, |
| ICMPv6ND_RA, |
| RouterAlert, |
| IPv6ExtHdrHopByHop, |
| ) |
| from scapy.utils6 import in6_ismaddr, in6_isllsnmaddr |
| |
| from framework import VppTestCase |
| from asfframework import VppTestRunner |
| from util import ppp |
| from vrf import VRFState |
| |
| |
| def is_ipv6_misc_ext(p): |
| """Is packet one of uninteresting IPv6 broadcasts (extended to filter out |
| ICMPv6 Neighbor Discovery - Neighbor Advertisement packets too)?""" |
| if p.haslayer(ICMPv6ND_RA): |
| if in6_ismaddr(p[IPv6].dst): |
| return True |
| if p.haslayer(ICMPv6ND_NS): |
| if in6_isllsnmaddr(p[IPv6].dst): |
| return True |
| if p.haslayer(IPv6ExtHdrHopByHop): |
| for o in p[IPv6ExtHdrHopByHop].options: |
| if isinstance(o, RouterAlert): |
| return True |
| return False |
| |
| |
| class TestIP6VrfMultiInst(VppTestCase): |
| """IP6 VRF Multi-instance Test Case""" |
| |
| @classmethod |
| def setUpClass(cls): |
| """ |
| Perform standard class setup (defined by class method setUpClass in |
| class VppTestCase) before running the test case, set test case related |
| variables and configure VPP. |
| """ |
| super(TestIP6VrfMultiInst, cls).setUpClass() |
| |
| # Test variables |
| cls.hosts_per_pg = 5 |
| cls.nr_of_vrfs = 5 |
| cls.pg_ifs_per_vrf = 3 |
| |
| try: |
| # Create pg interfaces |
| cls.create_pg_interfaces(range(cls.nr_of_vrfs * cls.pg_ifs_per_vrf)) |
| |
| # Packet flows mapping pg0 -> pg1, pg2 etc. |
| cls.flows = dict() |
| for i in range(len(cls.pg_interfaces)): |
| multiplicand = i // cls.pg_ifs_per_vrf |
| pg_list = [ |
| cls.pg_interfaces[multiplicand * cls.pg_ifs_per_vrf + j] |
| for j in range(cls.pg_ifs_per_vrf) |
| if (multiplicand * cls.pg_ifs_per_vrf + j) != i |
| ] |
| cls.flows[cls.pg_interfaces[i]] = pg_list |
| |
| # Packet sizes - jumbo packet (9018 bytes) skipped |
| cls.pg_if_packet_sizes = [64, 512, 1518] |
| |
| # Set up all interfaces |
| for pg_if in cls.pg_interfaces: |
| pg_if.admin_up() |
| pg_if.generate_remote_hosts(cls.hosts_per_pg) |
| |
| # Create list of VRFs |
| cls.vrf_list = list() |
| |
| # Create list of reset VRFs |
| cls.vrf_reset_list = list() |
| |
| # Create list of pg_interfaces in VRFs |
| cls.pg_in_vrf = list() |
| |
| # Create list of pg_interfaces not in VRFs |
| cls.pg_not_in_vrf = [pg_if for pg_if in cls.pg_interfaces] |
| |
| # Create mapping of pg_interfaces to VRF IDs |
| cls.pg_if_sets = dict() |
| for i in range(cls.nr_of_vrfs): |
| set_id = i + 1 |
| pg_list = [ |
| cls.pg_interfaces[i * cls.pg_ifs_per_vrf + j] |
| for j in range(cls.pg_ifs_per_vrf) |
| ] |
| cls.pg_if_sets[set_id] = pg_list |
| |
| except Exception: |
| super(TestIP6VrfMultiInst, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestIP6VrfMultiInst, cls).tearDownClass() |
| |
| def setUp(self): |
| """ |
| Clear trace and packet infos before running each test. |
| """ |
| super(TestIP6VrfMultiInst, self).setUp() |
| self.reset_packet_infos() |
| |
| def tearDown(self): |
| """ |
| Show various debug prints after each test. |
| """ |
| super(TestIP6VrfMultiInst, self).tearDown() |
| |
| def show_commands_at_teardown(self): |
| self.logger.info(self.vapi.ppcli("show ip6 fib")) |
| self.logger.info(self.vapi.ppcli("show ip6 neighbors")) |
| |
| def _assign_interfaces(self, vrf_id, if_set_id): |
| for i in range(self.pg_ifs_per_vrf): |
| pg_if = self.pg_if_sets[if_set_id][i] |
| pg_if.set_table_ip6(vrf_id) |
| self.logger.info( |
| "pg-interface %s added to IPv6 VRF ID %d" % (pg_if.name, vrf_id) |
| ) |
| if pg_if not in self.pg_in_vrf: |
| self.pg_in_vrf.append(pg_if) |
| if pg_if in self.pg_not_in_vrf: |
| self.pg_not_in_vrf.remove(pg_if) |
| pg_if.config_ip6() |
| pg_if.disable_ipv6_ra() |
| pg_if.configure_ipv6_neighbors() |
| |
| def create_vrf_and_assign_interfaces(self, count, start=1): |
| """ |
| Create required number of FIB tables / VRFs, put 3 pg-ip6 interfaces |
| to every FIB table / VRF. |
| |
| :param int count: Number of FIB tables / VRFs to be created. |
| :param int start: Starting number of the FIB table / VRF ID. \ |
| (Default value = 1) |
| """ |
| for i in range(count): |
| vrf_id = i + start |
| self.vapi.ip_table_add_del_v2( |
| is_add=1, table={"table_id": vrf_id, "is_ip6": 1} |
| ) |
| self.logger.info("IPv6 VRF ID %d created" % vrf_id) |
| if vrf_id not in self.vrf_list: |
| self.vrf_list.append(vrf_id) |
| if vrf_id in self.vrf_reset_list: |
| self.vrf_reset_list.remove(vrf_id) |
| self._assign_interfaces(vrf_id, vrf_id) |
| self.logger.debug(self.vapi.ppcli("show ip6 fib")) |
| self.logger.debug(self.vapi.ppcli("show ip6 neighbors")) |
| |
| def create_vrf_by_id_and_assign_interfaces(self, set_id, vrf_id=0xFFFFFFFF): |
| """ |
| Create a FIB table / VRF by vrf_id, put 3 pg-ip6 interfaces |
| to FIB table / VRF. |
| |
| :param int vrf_id: Required table ID / VRF ID. \ |
| (Default value = 0xffffffff, ID will be selected automatically) |
| """ |
| ret = self.vapi.ip_table_allocate(table={"table_id": vrf_id, "is_ip6": 1}) |
| vrf_id = ret.table.table_id |
| self.logger.info("IPv6 VRF ID %d created" % vrf_id) |
| if vrf_id not in self.vrf_list: |
| self.vrf_list.append(vrf_id) |
| if vrf_id in self.vrf_reset_list: |
| self.vrf_reset_list.remove(vrf_id) |
| self._assign_interfaces(vrf_id, set_id) |
| self.logger.debug(self.vapi.ppcli("show ip6 fib")) |
| self.logger.debug(self.vapi.ppcli("show ip6 neighbors")) |
| |
| return vrf_id |
| |
| def reset_vrf_and_remove_from_vrf_list(self, vrf_id, if_set_id=None): |
| """ |
| Reset required FIB table / VRF and remove it from VRF list. |
| |
| :param int vrf_id: The FIB table / VRF ID to be reset. |
| """ |
| if if_set_id is None: |
| if_set_id = vrf_id |
| self.vapi.ip_table_flush(table={"table_id": vrf_id, "is_ip6": 1}) |
| if vrf_id in self.vrf_list: |
| self.vrf_list.remove(vrf_id) |
| if vrf_id not in self.vrf_reset_list: |
| self.vrf_reset_list.append(vrf_id) |
| for j in range(self.pg_ifs_per_vrf): |
| pg_if = self.pg_if_sets[if_set_id][j] |
| pg_if.unconfig_ip6() |
| pg_if.set_table_ip6(0) |
| if pg_if in self.pg_in_vrf: |
| self.pg_in_vrf.remove(pg_if) |
| if pg_if not in self.pg_not_in_vrf: |
| self.pg_not_in_vrf.append(pg_if) |
| self.logger.info("IPv6 VRF ID %d reset finished" % vrf_id) |
| self.logger.debug(self.vapi.ppcli("show ip6 fib")) |
| self.logger.debug(self.vapi.ppcli("show ip6 neighbors")) |
| |
| def delete_vrf(self, vrf_id): |
| if vrf_id in self.vrf_list: |
| self.vrf_list.remove(vrf_id) |
| if vrf_id in self.vrf_reset_list: |
| self.vrf_reset_list.remove(vrf_id) |
| self.vapi.ip_table_add_del_v2(is_add=0, table={"table_id": vrf_id, "is_ip6": 1}) |
| |
| def create_stream(self, src_if, packet_sizes): |
| """ |
| Create input packet stream for defined interface using hosts list. |
| |
| :param object src_if: Interface to create packet stream for. |
| :param list packet_sizes: List of required packet sizes. |
| :return: Stream of packets. |
| """ |
| pkts = [] |
| src_hosts = src_if.remote_hosts |
| for dst_if in self.flows[src_if]: |
| for dst_host in dst_if.remote_hosts: |
| src_host = random.choice(src_hosts) |
| pkt_info = self.create_packet_info(src_if, dst_if) |
| payload = self.info_to_payload(pkt_info) |
| p = ( |
| Ether(dst=src_if.local_mac, src=src_host.mac) |
| / IPv6(src=src_host.ip6, dst=dst_host.ip6) |
| / UDP(sport=1234, dport=1234) |
| / Raw(payload) |
| ) |
| pkt_info.data = p.copy() |
| size = random.choice(packet_sizes) |
| self.extend_packet(p, size) |
| pkts.append(p) |
| self.logger.debug( |
| "Input stream created for port %s. Length: %u pkt(s)" |
| % (src_if.name, len(pkts)) |
| ) |
| return pkts |
| |
| def create_stream_crosswise_vrf(self, src_if, vrf_id, packet_sizes): |
| """ |
| Create input packet stream for negative test for leaking across |
| different VRFs for defined interface using hosts list. |
| |
| :param object src_if: Interface to create packet stream for. |
| :param int vrf_id: The FIB table / VRF ID where src_if is assigned. |
| :param list packet_sizes: List of required packet sizes. |
| :return: Stream of packets. |
| """ |
| pkts = [] |
| src_hosts = src_if.remote_hosts |
| vrf_lst = list(self.vrf_list) |
| vrf_lst.remove(vrf_id) |
| for vrf in vrf_lst: |
| for dst_if in self.pg_if_sets[vrf]: |
| for dst_host in dst_if.remote_hosts: |
| src_host = random.choice(src_hosts) |
| pkt_info = self.create_packet_info(src_if, dst_if) |
| payload = self.info_to_payload(pkt_info) |
| p = ( |
| Ether(dst=src_if.local_mac, src=src_host.mac) |
| / IPv6(src=src_host.ip6, dst=dst_host.ip6) |
| / UDP(sport=1234, dport=1234) |
| / Raw(payload) |
| ) |
| pkt_info.data = p.copy() |
| size = random.choice(packet_sizes) |
| self.extend_packet(p, size) |
| pkts.append(p) |
| self.logger.debug( |
| "Input stream created for port %s. Length: %u pkt(s)" |
| % (src_if.name, len(pkts)) |
| ) |
| return pkts |
| |
| def verify_capture(self, pg_if, capture): |
| """ |
| Verify captured input packet stream for defined interface. |
| |
| :param object pg_if: Interface to verify captured packet stream for. |
| :param list capture: Captured packet stream. |
| """ |
| last_info = dict() |
| for i in self.pg_interfaces: |
| last_info[i.sw_if_index] = None |
| dst_sw_if_index = pg_if.sw_if_index |
| for packet in capture: |
| try: |
| ip = packet[IPv6] |
| udp = packet[UDP] |
| payload_info = self.payload_to_info(packet[Raw]) |
| packet_index = payload_info.index |
| self.assertEqual(payload_info.dst, dst_sw_if_index) |
| self.logger.debug( |
| "Got packet on port %s: src=%u (id=%u)" |
| % (pg_if.name, payload_info.src, packet_index) |
| ) |
| next_info = self.get_next_packet_info_for_interface2( |
| payload_info.src, dst_sw_if_index, last_info[payload_info.src] |
| ) |
| last_info[payload_info.src] = next_info |
| self.assertIsNotNone(next_info) |
| self.assertEqual(packet_index, next_info.index) |
| saved_packet = next_info.data |
| # Check standard fields |
| self.assertEqual(ip.src, saved_packet[IPv6].src) |
| self.assertEqual(ip.dst, saved_packet[IPv6].dst) |
| self.assertEqual(udp.sport, saved_packet[UDP].sport) |
| self.assertEqual(udp.dport, saved_packet[UDP].dport) |
| except: |
| self.logger.error(ppp("Unexpected or invalid packet:", packet)) |
| raise |
| for i in self.pg_interfaces: |
| remaining_packet = self.get_next_packet_info_for_interface2( |
| i, dst_sw_if_index, last_info[i.sw_if_index] |
| ) |
| self.assertIsNone( |
| remaining_packet, |
| "Port %u: Packet expected from source %u didn't arrive" |
| % (dst_sw_if_index, i.sw_if_index), |
| ) |
| |
| def verify_vrf(self, vrf_id, if_set_id=None): |
| """ |
| Check if the FIB table / VRF ID is configured. |
| |
| :param int vrf_id: The FIB table / VRF ID to be verified. |
| :return: 1 if the FIB table / VRF ID is configured, otherwise return 0. |
| """ |
| if if_set_id is None: |
| if_set_id = vrf_id |
| ip6_fib_dump = self.vapi.ip_route_dump(vrf_id, True) |
| vrf_exist = len(ip6_fib_dump) |
| vrf_count = 0 |
| for ip6_fib_details in ip6_fib_dump: |
| addr = ip6_fib_details.route.prefix.network_address |
| found = False |
| for pg_if in self.pg_if_sets[if_set_id]: |
| if found: |
| break |
| for host in pg_if.remote_hosts: |
| if str(addr) == host.ip6: |
| vrf_count += 1 |
| found = True |
| break |
| if not vrf_exist and vrf_count == 0: |
| self.logger.info("IPv6 VRF ID %d is not configured" % vrf_id) |
| return VRFState.not_configured |
| elif vrf_exist and vrf_count == 0: |
| self.logger.info("IPv6 VRF ID %d has been reset" % vrf_id) |
| return VRFState.reset |
| else: |
| self.logger.info("IPv6 VRF ID %d is configured" % vrf_id) |
| return VRFState.configured |
| |
| def run_verify_test(self): |
| """ |
| Create packet streams for all configured pg interfaces, send all \ |
| prepared packet streams and verify that: |
| - all packets received correctly on all pg-ip6 interfaces assigned |
| to VRFs |
| - no packet received on all pg-ip6 interfaces not assigned to VRFs |
| |
| :raise RuntimeError: If no packet captured on pg-ip6 interface assigned |
| to VRF or if any packet is captured on pg-ip6 interface not |
| assigned to VRF. |
| """ |
| # Test |
| # Create incoming packet streams for packet-generator interfaces |
| for pg_if in self.pg_interfaces: |
| pkts = self.create_stream(pg_if, self.pg_if_packet_sizes) |
| pg_if.add_stream(pkts) |
| |
| # Enable packet capture and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify |
| # Verify outgoing packet streams per packet-generator interface |
| for pg_if in self.pg_interfaces: |
| if pg_if in self.pg_in_vrf: |
| capture = pg_if.get_capture(remark="interface is in VRF") |
| self.verify_capture(pg_if, capture) |
| elif pg_if in self.pg_not_in_vrf: |
| pg_if.assert_nothing_captured( |
| remark="interface is not in VRF", filter_out_fn=is_ipv6_misc_ext |
| ) |
| self.logger.debug("No capture for interface %s" % pg_if.name) |
| else: |
| raise Exception("Unknown interface: %s" % pg_if.name) |
| |
| def run_crosswise_vrf_test(self): |
| """ |
| Create packet streams for every pg-ip6 interface in VRF towards all |
| pg-ip6 interfaces in other VRFs, send all prepared packet streams and |
| verify that: |
| |
| - no packet received on all configured pg-ip6 interfaces |
| |
| :raise RuntimeError: If any packet is captured on any pg-ip6 interface. |
| """ |
| # Test |
| # Create incoming packet streams for packet-generator interfaces |
| for vrf_id in self.vrf_list: |
| for pg_if in self.pg_if_sets[vrf_id]: |
| pkts = self.create_stream_crosswise_vrf( |
| pg_if, vrf_id, self.pg_if_packet_sizes |
| ) |
| pg_if.add_stream(pkts) |
| |
| # Enable packet capture and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify |
| # Verify outgoing packet streams per packet-generator interface |
| for pg_if in self.pg_interfaces: |
| pg_if.assert_nothing_captured( |
| remark="interface is in other VRF", filter_out_fn=is_ipv6_misc_ext |
| ) |
| self.logger.debug("No capture for interface %s" % pg_if.name) |
| |
| def test_ip6_vrf_01(self): |
| """IP6 VRF Multi-instance test 1 - create 4 VRFs""" |
| # Config 1 |
| # Create 4 VRFs |
| self.create_vrf_and_assign_interfaces(4) |
| |
| # Verify 1 |
| for vrf_id in self.vrf_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.configured, VRFState) |
| |
| # Test 1 |
| self.run_verify_test() |
| self.run_crosswise_vrf_test() |
| |
| def test_ip6_vrf_02(self): |
| """IP6 VRF Multi-instance test 2 - reset 2 VRFs""" |
| # Config 2 |
| # Delete 2 VRFs |
| self.reset_vrf_and_remove_from_vrf_list(1) |
| self.reset_vrf_and_remove_from_vrf_list(2) |
| |
| # Verify 2 |
| for vrf_id in self.vrf_reset_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.reset, VRFState) |
| for vrf_id in self.vrf_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.configured, VRFState) |
| |
| # Test 2 |
| self.run_verify_test() |
| self.run_crosswise_vrf_test() |
| |
| # Reset routes learned from ICMPv6 Neighbor Discovery |
| # for vrf_id in self.vrf_reset_list: |
| # self.reset_vrf_and_remove_from_vrf_list(vrf_id) |
| |
| def test_ip6_vrf_03(self): |
| """IP6 VRF Multi-instance 3 - add 2 VRFs""" |
| # Config 3 |
| # Add 1 of reset VRFs and 1 new VRF |
| self.create_vrf_and_assign_interfaces(1) |
| self.create_vrf_and_assign_interfaces(1, start=5) |
| |
| # Verify 3 |
| for vrf_id in self.vrf_reset_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.reset, VRFState) |
| for vrf_id in self.vrf_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.configured, VRFState) |
| |
| # Test 3 |
| self.run_verify_test() |
| self.run_crosswise_vrf_test() |
| |
| # Reset routes learned from ICMPv6 Neighbor Discovery |
| # for vrf_id in self.vrf_reset_list: |
| # self.reset_vrf_and_remove_from_vrf_list(vrf_id) |
| |
| def test_ip6_vrf_04(self): |
| """IP6 VRF Multi-instance test 4 - reset 4 VRFs""" |
| # Config 4 |
| # Reset all VRFs (i.e. no VRF except VRF=0 configured) |
| for i in range(len(self.vrf_list)): |
| # This call removes the first item of vrf_list as a side effect |
| self.reset_vrf_and_remove_from_vrf_list(self.vrf_list[0]) |
| |
| # Verify 4 |
| for vrf_id in self.vrf_reset_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.reset, VRFState) |
| vrf_list_length = len(self.vrf_list) |
| self.assertEqual( |
| vrf_list_length, |
| 0, |
| "List of configured VRFs is not empty: %s != 0" % vrf_list_length, |
| ) |
| |
| # Test 4 |
| self.run_verify_test() |
| self.run_crosswise_vrf_test() |
| |
| def test_ip6_vrf_05(self): |
| """IP6 VRF Multi-instance test 5 - auto allocate vrf id""" |
| # Config 5 |
| # Create several VRFs |
| # Set vrf_id manually first |
| self.create_vrf_by_id_and_assign_interfaces(1, 10) |
| # Set vrf_id automatically a few times |
| auto_vrf_id = [ |
| self.create_vrf_by_id_and_assign_interfaces(i) for i in range(2, 5) |
| ] |
| |
| # Verify 5 |
| self.assert_equal(self.verify_vrf(10, 1), VRFState.configured, VRFState) |
| for i, vrf in enumerate(auto_vrf_id): |
| self.assert_equal( |
| self.verify_vrf(vrf, i + 2), VRFState.configured, VRFState |
| ) |
| |
| # Test 5 |
| self.run_verify_test() |
| |
| # Config 5.1 |
| # Reset VRFs |
| self.reset_vrf_and_remove_from_vrf_list(10, 1) |
| for i, vrf in enumerate(auto_vrf_id): |
| self.reset_vrf_and_remove_from_vrf_list(vrf, i + 2) |
| |
| # Verify 5.1 |
| self.assert_equal(self.verify_vrf(10, 1), VRFState.reset, VRFState) |
| for i, vrf in enumerate(auto_vrf_id): |
| self.assert_equal(self.verify_vrf(vrf, i + 2), VRFState.reset, VRFState) |
| |
| vrf_list_length = len(self.vrf_list) |
| self.assertEqual( |
| vrf_list_length, |
| 0, |
| "List of configured VRFs is not empty: %s != 0" % vrf_list_length, |
| ) |
| |
| # Cleanup our extra created VRFs |
| for vrf in auto_vrf_id: |
| self.delete_vrf(vrf) |
| self.delete_vrf(5) |
| self.delete_vrf(10) |
| |
| def test_ip6_vrf_06(self): |
| """IP6 VRF Multi-instance test 6 - recreate 4 VRFs""" |
| # Reconfigure all the VRFs |
| self.create_vrf_and_assign_interfaces(4) |
| # Verify |
| for vrf_id in self.vrf_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.configured, VRFState) |
| # Test |
| self.run_verify_test() |
| self.run_crosswise_vrf_test() |
| # Cleanup |
| for i in range(len(self.vrf_list)): |
| self.reset_vrf_and_remove_from_vrf_list(self.vrf_list[0]) |
| # Verify |
| for vrf_id in self.vrf_reset_list: |
| self.assert_equal(self.verify_vrf(vrf_id), VRFState.reset, VRFState) |
| vrf_list_length = len(self.vrf_list) |
| self.assertEqual( |
| vrf_list_length, |
| 0, |
| "List of configured VRFs is not empty: %s != 0" % vrf_list_length, |
| ) |
| # Test |
| self.run_verify_test() |
| self.run_crosswise_vrf_test() |
| |
| |
| if __name__ == "__main__": |
| unittest.main(testRunner=VppTestRunner) |