| #!/usr/bin/env python3 |
| """IP4 and IP6 MTU functional tests""" |
| |
| # |
| # Add tests for: |
| # - sub interfaces |
| # - Verify that adjacencies inherit MTU correctly |
| # - Verify that sub-interfaces inherit MTU correctly |
| # - Different types of interfaces? |
| # |
| import unittest |
| from scapy.layers.inet6 import IPv6, Ether, IP, UDP, ICMPv6PacketTooBig |
| from scapy.layers.inet import ICMP |
| from framework import VppTestCase |
| from asfframework import VppTestRunner |
| from util import reassemble4 |
| |
| |
| """ Test_mtu is a subclass of VPPTestCase classes. |
| MTU tests. |
| """ |
| |
| |
| class TestMTU(VppTestCase): |
| """MTU Test Case""" |
| |
| maxDiff = None |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMTU, cls).setUpClass() |
| cls.create_pg_interfaces(range(2)) |
| cls.interfaces = list(cls.pg_interfaces) |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMTU, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMTU, self).setUp() |
| for i in self.interfaces: |
| i.admin_up() |
| i.config_ip4() |
| i.config_ip6() |
| i.disable_ipv6_ra() |
| i.resolve_arp() |
| i.resolve_ndp() |
| |
| def tearDown(self): |
| super(TestMTU, self).tearDown() |
| if not self.vpp_dead: |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.admin_down() |
| |
| def validate(self, rx, expected): |
| self.assertTrue(bytes(rx), bytes(expected)) |
| |
| def validate_bytes(self, rx, expected): |
| self.assertEqual(rx, expected) |
| |
| def payload(self, len): |
| return "x" * len |
| |
| def get_mtu(self, sw_if_index): |
| rv = self.vapi.sw_interface_dump(sw_if_index=sw_if_index) |
| for i in rv: |
| if i.sw_if_index == sw_if_index: |
| return i.mtu[0] |
| return 0 |
| |
| def test_ip4_mtu(self): |
| """IP4 MTU test""" |
| |
| p_ether = Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) |
| p_ip4 = IP(src=self.pg0.remote_ip4, dst=self.pg1.remote_ip4, flags="DF") |
| |
| current_mtu = self.get_mtu(self.pg1.sw_if_index) |
| |
| p_payload = UDP(sport=1234, dport=1234) / self.payload(current_mtu - 20 - 8) |
| |
| p4 = p_ether / p_ip4 / p_payload |
| p4_reply = p_ip4 / p_payload |
| p4_reply.ttl -= 1 |
| rx = self.send_and_expect(self.pg0, p4 * 11, self.pg1) |
| for p in rx: |
| self.validate(p[1], p4_reply) |
| |
| # MTU |
| self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, [576, 0, 0, 0]) |
| self.assertEqual(576, self.get_mtu(self.pg1.sw_if_index)) |
| |
| # Should fail. Too large MTU |
| p_icmp4 = ICMP( |
| type="dest-unreach", |
| code="fragmentation-needed", |
| nexthopmtu=576, |
| chksum=0x2DBB, |
| ) |
| icmp4_reply = ( |
| IP(src=self.pg0.local_ip4, dst=self.pg0.remote_ip4, ttl=255, len=576, id=0) |
| / p_icmp4 |
| / p_ip4 |
| / p_payload |
| ) |
| s = bytes(icmp4_reply) |
| icmp4_reply = s[0:576] |
| rx = self.send_and_expect_some(self.pg0, p4 * 11, self.pg0) |
| for p in rx: |
| self.validate_bytes(bytes(p[1]), icmp4_reply) |
| |
| self.assert_error_counter_equal("/err/ip4-input/mtu_exceeded", 11) |
| |
| # Now with DF off. Expect fragments. |
| # First go with 1500 byte packets. |
| p_payload = UDP(sport=1234, dport=1234) / self.payload(1500 - 20 - 8) |
| p4 = p_ether / p_ip4 / p_payload |
| p4.flags = 0 |
| p4_reply = p_ip4 / p_payload |
| p4_reply.ttl = p_ip4.ttl - 1 |
| p4_reply.flags = 0 |
| p4_reply.id = 256 |
| self.pg_enable_capture() |
| self.pg0.add_stream(p4 * 1) |
| self.pg_start() |
| rx = self.pg1.get_capture(3) |
| reass_pkt = reassemble4(rx) |
| self.validate(reass_pkt, p4_reply) |
| |
| """ |
| # Now what happens with a 9K frame |
| p_payload = UDP(sport=1234, dport=1234) / self.payload( |
| current_mtu - 20 - 8) |
| p4 = p_ether / p_ip4 / p_payload |
| p4.flags = 0 |
| p4_reply = p_ip4 / p_payload |
| p4_reply.ttl = 62 # check this |
| p4_reply.flags = 0 |
| p4_reply.id = 512 |
| |
| self.pg_enable_capture() |
| self.pg0.add_stream(p4*1) |
| self.pg_start() |
| rx = self.pg1.get_capture(16) |
| reass_pkt = reassemble4(rx) |
| reass_pkt.show2() |
| p4_reply.show2() |
| self.validate(reass_pkt, p4_reply) |
| """ |
| |
| # Reset MTU |
| self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, [current_mtu, 0, 0, 0]) |
| |
| def test_ip6_mtu(self): |
| """IP6 MTU test""" |
| |
| current_mtu = self.get_mtu(self.pg1.sw_if_index) |
| |
| p_ether = Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) |
| p_ip6 = IPv6(src=self.pg0.remote_ip6, dst=self.pg1.remote_ip6) |
| |
| p_payload = UDP(sport=1234, dport=1234) / self.payload(current_mtu - 40 - 8) |
| |
| p6 = p_ether / p_ip6 / p_payload |
| p6_reply = p_ip6 / p_payload |
| p6_reply.hlim -= 1 |
| rx = self.send_and_expect(self.pg0, p6 * 9, self.pg1) |
| for p in rx: |
| self.validate(p[1], p6_reply) |
| |
| # MTU (only checked on encap) |
| self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, [1280, 0, 0, 0]) |
| self.assertEqual(1280, self.get_mtu(self.pg1.sw_if_index)) |
| |
| # Should fail. Too large MTU |
| p_icmp6 = ICMPv6PacketTooBig(mtu=1280, cksum=0x4C7A) |
| icmp6_reply = ( |
| IPv6(src=self.pg0.local_ip6, dst=self.pg0.remote_ip6, hlim=255, plen=1240) |
| / p_icmp6 |
| / p_ip6 |
| / p_payload |
| ) |
| icmp6_reply[2].hlim -= 1 |
| s = bytes(icmp6_reply) |
| icmp6_reply_str = s[0:1280] |
| |
| rx = self.send_and_expect_some(self.pg0, p6 * 9, self.pg0) |
| for p in rx: |
| self.validate_bytes(bytes(p[1]), icmp6_reply_str) |
| |
| self.assert_error_counter_equal("/err/ip6-input/mtu_exceeded", 9) |
| |
| # Reset MTU |
| self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, [current_mtu, 0, 0, 0]) |
| |
| |
| if __name__ == "__main__": |
| unittest.main(testRunner=VppTestRunner) |