| from scapy.layers.inet import IP, ICMP |
| |
| from framework import VppTestCase |
| from vpp_ip_route import VppIpInterfaceAddress, VppIpRoute, VppRoutePath |
| from vpp_neighbor import VppNeighbor |
| from config import config |
| |
| import unittest |
| |
| """ TestPing is a subclass of VPPTestCase classes. |
| |
| Basic test for sanity check of the ping. |
| |
| """ |
| |
| |
| @unittest.skipIf("ping" in config.excluded_plugins, "Exclude Ping plugin tests") |
| class TestPing(VppTestCase): |
| """Ping Test Case""" |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestPing, cls).setUpClass() |
| try: |
| cls.create_pg_interfaces(range(2)) |
| cls.interfaces = list(cls.pg_interfaces) |
| |
| for i in cls.interfaces: |
| i.admin_up() |
| i.config_ip4() |
| i.config_ip6() |
| i.disable_ipv6_ra() |
| i.resolve_arp() |
| i.resolve_ndp() |
| except Exception: |
| super(TestPing, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestPing, cls).tearDownClass() |
| |
| def tearDown(self): |
| super(TestPing, self).tearDown() |
| |
| def show_commands_at_teardown(self): |
| self.logger.info(self.vapi.cli("show hardware")) |
| |
| def verify_ping_request(self, p, src, dst, seq): |
| ip = p[IP] |
| self.assertEqual(ip.version, 4) |
| self.assertEqual(ip.flags, 0) |
| self.assertEqual(ip.src, src) |
| self.assertEqual(ip.dst, dst) |
| self.assertEqual(ip.proto, 1) |
| self.assertEqual(len(ip.options), 0) |
| self.assertGreaterEqual(ip.ttl, 254) |
| icmp = p[ICMP] |
| self.assertEqual(icmp.type, 8) |
| self.assertEqual(icmp.code, 0) |
| self.assertEqual(icmp.seq, seq) |
| return icmp |
| |
| def test_ping_basic(self): |
| """basic ping test""" |
| try: |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| self.logger.info(self.vapi.cli("show ip4 neighbors")) |
| self.logger.info(self.vapi.cli("show ip6 neighbors")) |
| |
| remote_ip4 = self.pg1.remote_ip4 |
| ping_cmd = "ping " + remote_ip4 + " interval 0.01 repeat 10" |
| ret = self.vapi.cli(ping_cmd) |
| self.logger.info(ret) |
| out = self.pg1.get_capture(10) |
| icmp_id = None |
| icmp_seq = 1 |
| for p in out: |
| icmp = self.verify_ping_request( |
| p, self.pg1.local_ip4, self.pg1.remote_ip4, icmp_seq |
| ) |
| icmp_seq = icmp_seq + 1 |
| if icmp_id is None: |
| icmp_id = icmp.id |
| else: |
| self.assertEqual(icmp.id, icmp_id) |
| finally: |
| self.vapi.cli("show error") |
| |
| def test_ping_burst(self): |
| """burst ping test""" |
| try: |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| self.logger.info(self.vapi.cli("show ip neighbors")) |
| |
| remote_ip4 = self.pg1.remote_ip4 |
| ping_cmd = "ping " + remote_ip4 + " interval 0.01 burst 3" |
| ret = self.vapi.cli(ping_cmd) |
| self.logger.info(ret) |
| out = self.pg1.get_capture(3 * 5) |
| icmp_id = None |
| icmp_seq = 1 |
| count = 0 |
| for p in out: |
| icmp = self.verify_ping_request( |
| p, self.pg1.local_ip4, self.pg1.remote_ip4, icmp_seq |
| ) |
| count = count + 1 |
| if count >= 3: |
| icmp_seq = icmp_seq + 1 |
| count = 0 |
| if icmp_id is None: |
| icmp_id = icmp.id |
| else: |
| self.assertEqual(icmp.id, icmp_id) |
| finally: |
| self.vapi.cli("show error") |
| |
| def test_ping_src(self): |
| """ping with source address set""" |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| self.logger.info(self.vapi.cli("show ip4 neighbors")) |
| self.logger.info(self.vapi.cli("show ip6 neighbors")) |
| |
| nbr_addr = "10.0.0.2" |
| VppIpInterfaceAddress(self, self.pg1, "10.0.0.1", 24).add_vpp_config() |
| VppNeighbor( |
| self, self.pg1.sw_if_index, "00:11:22:33:44:55", nbr_addr |
| ).add_vpp_config() |
| |
| ping_cmd = "ping %s interval 0.01 repeat 3" % self.pg1.remote_ip4 |
| ret = self.vapi.cli(ping_cmd) |
| out = self.pg1.get_capture(3) |
| icmp_seq = 1 |
| for p in out: |
| icmp = self.verify_ping_request( |
| p, self.pg1.local_ip4, self.pg1.remote_ip4, icmp_seq |
| ) |
| icmp_seq = icmp_seq + 1 |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| ping_cmd = "ping %s interval 0.01 repeat 3" % nbr_addr |
| ret = self.vapi.cli(ping_cmd) |
| out = self.pg1.get_capture(3) |
| icmp_seq = 1 |
| for p in out: |
| icmp = self.verify_ping_request(p, "10.0.0.1", nbr_addr, icmp_seq) |
| icmp_seq = icmp_seq + 1 |
| |
| def test_ping_fib_routed_dst(self): |
| """ping destination routed according to FIB table""" |
| |
| try: |
| self.pg1.generate_remote_hosts(1) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| routed_dst = "10.0.2.0" |
| self.logger.info(self.vapi.cli("show ip4 neighbors")) |
| VppIpRoute( |
| self, |
| routed_dst, |
| 24, |
| [VppRoutePath(self.pg1.remote_hosts[0].ip4, self.pg1.sw_if_index)], |
| ).add_vpp_config() |
| ping_cmd = "ping %s interval 0.01 repeat 3" % routed_dst |
| ret = self.vapi.cli(ping_cmd) |
| self.logger.info(ret) |
| out = self.pg1.get_capture(3) |
| icmp_seq = 1 |
| for p in out: |
| self.verify_ping_request(p, self.pg1.local_ip4, routed_dst, icmp_seq) |
| icmp_seq = icmp_seq + 1 |
| finally: |
| self.vapi.cli("show error") |
| |
| def test_ping_api(self): |
| """ping api""" |
| |
| try: |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| ret = self.vapi.want_ping_finished_events( |
| address=self.pg1.remote_ip4, |
| repeat=4, |
| interval=0.2, |
| ) |
| self.logger.info(ret) |
| timeout = 1 |
| |
| ev = self.vapi.wait_for_event(timeout, "ping_finished_event") |
| self.logger.info(ev) |
| self.assertEqual(ev.request_count, 4) |
| |
| out = self.pg1.get_capture(4) |
| icmp_id = None |
| icmp_seq = 1 |
| for p in out: |
| icmp = self.verify_ping_request( |
| p, self.pg1.local_ip4, self.pg1.remote_ip4, icmp_seq |
| ) |
| icmp_seq = icmp_seq + 1 |
| if icmp_id is None: |
| icmp_id = icmp.id |
| else: |
| self.assertEqual(icmp.id, icmp_id) |
| finally: |
| self.vapi.cli("show error") |