| #!/usr/bin/env python3 |
| |
| import socket |
| from util import ip4_range, reassemble4_ether |
| import unittest |
| from framework import VppTestCase, VppTestRunner |
| from template_bd import BridgeDomain |
| |
| from scapy.layers.l2 import Ether |
| from scapy.packet import Raw |
| from scapy.layers.inet import IP, UDP |
| from scapy.layers.vxlan import VXLAN |
| |
| from vpp_ip_route import VppIpRoute, VppRoutePath |
| from vpp_ip import INVALID_INDEX |
| |
| |
| class TestVxlanGbp(VppTestCase): |
| """ VXLAN GBP Test Case """ |
| |
| @property |
| def frame_request(self): |
| """ Ethernet frame modeling a generic request """ |
| return (Ether(src='00:00:00:00:00:01', dst='00:00:00:00:00:02') / |
| IP(src='1.2.3.4', dst='4.3.2.1') / |
| UDP(sport=10000, dport=20000) / |
| Raw(b'\xa5' * 100)) |
| |
| @property |
| def frame_reply(self): |
| """ Ethernet frame modeling a generic reply """ |
| return (Ether(src='00:00:00:00:00:02', dst='00:00:00:00:00:01') / |
| IP(src='4.3.2.1', dst='1.2.3.4') / |
| UDP(sport=20000, dport=10000) / |
| Raw(b'\xa5' * 100)) |
| |
| def encapsulate(self, pkt, vni): |
| """ |
| Encapsulate the original payload frame by adding VXLAN GBP header with |
| its UDP, IP and Ethernet fields |
| """ |
| return (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) / |
| IP(src=self.pg0.remote_ip4, dst=self.pg0.local_ip4) / |
| UDP(sport=self.dport, dport=self.dport, chksum=0) / |
| VXLAN(vni=vni, flags=self.flags, gpflags=self.gpflags, |
| gpid=self.sclass) / pkt) |
| |
| def ip_range(self, start, end): |
| """ range of remote ip's """ |
| return ip4_range(self.pg0.remote_ip4, start, end) |
| |
| def decapsulate(self, pkt): |
| """ |
| Decapsulate the original payload frame by removing VXLAN header |
| """ |
| # check if is set G and I flag |
| self.assertEqual(pkt[VXLAN].flags, int('0x88', 16)) |
| return pkt[VXLAN].payload |
| |
| # Method for checking VXLAN GBP encapsulation. |
| # |
| def check_encapsulation(self, pkt, vni, local_only=False, mcast_pkt=False): |
| # TODO: add error messages |
| # Verify source MAC is VPP_MAC and destination MAC is MY_MAC resolved |
| # by VPP using ARP. |
| self.assertEqual(pkt[Ether].src, self.pg0.local_mac) |
| if not local_only: |
| if not mcast_pkt: |
| self.assertEqual(pkt[Ether].dst, self.pg0.remote_mac) |
| else: |
| self.assertEqual(pkt[Ether].dst, type(self).mcast_mac) |
| # Verify VXLAN GBP tunnel source IP is VPP_IP and destination IP is |
| # MY_IP. |
| self.assertEqual(pkt[IP].src, self.pg0.local_ip4) |
| if not local_only: |
| if not mcast_pkt: |
| self.assertEqual(pkt[IP].dst, self.pg0.remote_ip4) |
| else: |
| self.assertEqual(pkt[IP].dst, type(self).mcast_ip4) |
| # Verify UDP destination port is VXLAN GBP 48879, source UDP port could |
| # be arbitrary. |
| self.assertEqual(pkt[UDP].dport, type(self).dport) |
| # TODO: checksum check |
| # Verify VNI |
| # pkt.show() |
| self.assertEqual(pkt[VXLAN].vni, vni) |
| # Verify Source Class |
| self.assertEqual(pkt[VXLAN].gpid, 0) |
| |
| @classmethod |
| def create_vxlan_gbp_flood_test_bd(cls, vni, n_ucast_tunnels): |
| # Create 2 ucast vxlan tunnels under bd |
| ip_range_start = 10 |
| ip_range_end = ip_range_start + n_ucast_tunnels |
| next_hop_address = cls.pg0.remote_ip4 |
| for dest_ip4 in ip4_range(cls.pg0.remote_ip4, |
| ip_range_start, |
| ip_range_end): |
| # add host route so dest_ip4 will not be resolved |
| rip = VppIpRoute(cls, dest_ip4, 32, |
| [VppRoutePath(next_hop_address, |
| INVALID_INDEX)], |
| register=False) |
| rip.add_vpp_config() |
| r = cls.vapi.vxlan_gbp_tunnel_add_del( |
| tunnel={ |
| 'src': cls.pg0.local_ip4, |
| 'dst': dest_ip4, |
| 'vni': vni, |
| 'instance': INVALID_INDEX, |
| 'mcast_sw_if_index': INVALID_INDEX, |
| 'mode': 1, |
| }, |
| is_add=1 |
| ) |
| cls.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index, |
| bd_id=vni) |
| |
| # Class method to start the VXLAN GBP test case. |
| # Overrides setUpClass method in VppTestCase class. |
| # Python try..except statement is used to ensure that the tear down of |
| # the class will be executed even if exception is raised. |
| # @param cls The class pointer. |
| @classmethod |
| def setUpClass(cls): |
| super(TestVxlanGbp, cls).setUpClass() |
| |
| try: |
| cls.dport = 48879 |
| cls.flags = 0x88 |
| cls.gpflags = 0x0 |
| cls.sclass = 0 |
| |
| # Create 2 pg interfaces. |
| cls.create_pg_interfaces(range(4)) |
| for pg in cls.pg_interfaces: |
| pg.admin_up() |
| |
| # Configure IPv4 addresses on VPP pg0. |
| cls.pg0.config_ip4() |
| |
| # Resolve MAC address for VPP's IP address on pg0. |
| cls.pg0.resolve_arp() |
| |
| # Create VXLAN GBP VTEP on VPP pg0, and put vxlan_gbp_tunnel0 and |
| # pg1 into BD. |
| cls.single_tunnel_bd = 1 |
| cls.single_tunnel_vni = 0xabcde |
| r = cls.vapi.vxlan_gbp_tunnel_add_del( |
| tunnel={ |
| 'src': cls.pg0.local_ip4, |
| 'dst': cls.pg0.remote_ip4, |
| 'vni': cls.single_tunnel_vni, |
| 'instance': INVALID_INDEX, |
| 'mcast_sw_if_index': INVALID_INDEX, |
| 'mode': 1, |
| }, |
| is_add=1 |
| ) |
| cls.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index, |
| bd_id=cls.single_tunnel_bd) |
| cls.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=cls.pg1.sw_if_index, |
| bd_id=cls.single_tunnel_bd) |
| |
| # Setup vni 2 to test multicast flooding |
| cls.n_ucast_tunnels = 2 |
| # Setup vni 3 to test unicast flooding |
| cls.ucast_flood_bd = 3 |
| cls.create_vxlan_gbp_flood_test_bd(cls.ucast_flood_bd, |
| cls.n_ucast_tunnels) |
| cls.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=cls.pg3.sw_if_index, |
| bd_id=cls.ucast_flood_bd) |
| except Exception: |
| super(TestVxlanGbp, cls).tearDownClass() |
| raise |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestVxlanGbp, cls).tearDownClass() |
| |
| def assert_eq_pkts(self, pkt1, pkt2): |
| """ Verify the Ether, IP, UDP, payload are equal in both |
| packets |
| """ |
| self.assertEqual(pkt1[Ether].src, pkt2[Ether].src) |
| self.assertEqual(pkt1[Ether].dst, pkt2[Ether].dst) |
| self.assertEqual(pkt1[IP].src, pkt2[IP].src) |
| self.assertEqual(pkt1[IP].dst, pkt2[IP].dst) |
| self.assertEqual(pkt1[UDP].sport, pkt2[UDP].sport) |
| self.assertEqual(pkt1[UDP].dport, pkt2[UDP].dport) |
| self.assertEqual(pkt1[Raw], pkt2[Raw]) |
| |
| def test_decap(self): |
| """ Decapsulation test |
| Send encapsulated frames from pg0 |
| Verify receipt of decapsulated frames on pg1 |
| """ |
| encapsulated_pkt = self.encapsulate(self.frame_request, |
| self.single_tunnel_vni) |
| |
| self.pg0.add_stream([encapsulated_pkt, ]) |
| |
| self.pg1.enable_capture() |
| |
| self.pg_start() |
| |
| # Pick first received frame and check if it's the non-encapsulated |
| # frame |
| out = self.pg1.get_capture(1) |
| pkt = out[0] |
| self.assert_eq_pkts(pkt, self.frame_request) |
| |
| def test_encap(self): |
| """ Encapsulation test |
| Send frames from pg1 |
| Verify receipt of encapsulated frames on pg0 |
| """ |
| self.pg1.add_stream([self.frame_reply]) |
| |
| self.pg0.enable_capture() |
| |
| self.pg_start() |
| |
| # Pick first received frame and check if it's correctly encapsulated. |
| out = self.pg0.get_capture(1) |
| pkt = out[0] |
| self.check_encapsulation(pkt, self.single_tunnel_vni) |
| |
| payload = self.decapsulate(pkt) |
| self.assert_eq_pkts(payload, self.frame_reply) |
| |
| def test_ucast_flood(self): |
| """ Unicast flood test |
| Send frames from pg3 |
| Verify receipt of encapsulated frames on pg0 |
| """ |
| self.pg3.add_stream([self.frame_reply]) |
| |
| self.pg0.enable_capture() |
| |
| self.pg_start() |
| |
| # Get packet from each tunnel and assert it's correctly encapsulated. |
| out = self.pg0.get_capture(self.n_ucast_tunnels) |
| for pkt in out: |
| self.check_encapsulation(pkt, self.ucast_flood_bd, True) |
| payload = self.decapsulate(pkt) |
| self.assert_eq_pkts(payload, self.frame_reply) |
| |
| def test_encap_big_packet(self): |
| """ Encapsulation test send big frame from pg1 |
| Verify receipt of encapsulated frames on pg0 |
| """ |
| |
| self.vapi.sw_interface_set_mtu(self.pg0.sw_if_index, [1500, 0, 0, 0]) |
| |
| frame = (Ether(src='00:00:00:00:00:02', dst='00:00:00:00:00:01') / |
| IP(src='4.3.2.1', dst='1.2.3.4') / |
| UDP(sport=20000, dport=10000) / |
| Raw(b'\xa5' * 1450)) |
| |
| self.pg1.add_stream([frame]) |
| |
| self.pg0.enable_capture() |
| |
| self.pg_start() |
| |
| # Pick first received frame and check if it's correctly encapsulated. |
| out = self.pg0.get_capture(2) |
| pkt = reassemble4_ether(out) |
| self.check_encapsulation(pkt, self.single_tunnel_vni) |
| |
| payload = self.decapsulate(pkt) |
| self.assert_eq_pkts(payload, frame) |
| |
| # Method to define VPP actions before tear down of the test case. |
| # Overrides tearDown method in VppTestCase class. |
| # @param self The object pointer. |
| def tearDown(self): |
| super(TestVxlanGbp, self).tearDown() |
| |
| def show_commands_at_teardown(self): |
| self.logger.info(self.vapi.cli("show bridge-domain 1 detail")) |
| self.logger.info(self.vapi.cli("show bridge-domain 3 detail")) |
| self.logger.info(self.vapi.cli("show vxlan-gbp tunnel")) |
| self.logger.info(self.vapi.cli("show error")) |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |