extras/vpp_config/README.rst - fdio/vpp - Gitiles

 Summary:

 The purpose of the VPP configuration utility is to allow the user to configure
 VPP in a simple and safe manner. The utility takes input from the user and
 then modifies the key configuration files. The user can then examine these files
 to be sure they are correct and then actually apply the configuration. The user
 can also install a released and stable version of VPP. This is currently
 released with release 17.10.

 Use:

 The installation and executing of the VPP configuration utility is simple. First
 install the python pip module. Using pip install, then pip install vpp-config.
 Then simply type Òvpp-configÓ and answer the questions. If you are not sure what
 to answer choose the default. For yes or no questions the capital letter
 designates the default. For example, for a question that shows [Y/n] Y is the
 default. For numbers the default is within the brackets for example for a
 question that shows [1024]. 1024 is the default.

 The flow of the utility is to inspect the system, if VPP is not install it,
 create dry run configurations, inspect the files created during the dry run,
 apply the configuration and then inspect the system again and then repeat.

 Caveats:

 - Supports Ubuntu, centos7, RedHat is coming shortly.

 For Developers:

 Modifying the code is reasonable simple. The process would be edit and debug the
 code from the root directory. In order to do this, we need a script that will copy
 or data files to the proper place. This is where they end up with pip install. For
 Ubuntu, this is /usr/local/vpp/vpp-config. I have provided a script that will copy
 the relevant files correctly. I have also provided a script that will clean the
 environment so you can start from scratch. These are the steps to run the utility
 in this environment. The scripts are meant to be run from the root directory.

   ./scripts/clean.sh
   ./scripts/cp-data.sh
   ./vpp_config.py

 When the utility is installed with pip the wrapper scripts/vpp-config is written to
 /usr/local/bin. However, the starting point when debugging this script locally is
 ./vpp_config.py. Run the utility by executing ./vpp_config.py from the root directory.

 The start point in the code is in vpp_config.py. However, most of the work is done in
 the files in ./vpplib

 Uploading to PyPi:

 To upload this utility to PpPi simple do the following. Currently, I have my own account
 when we want everyone to contribute we will need to change that.

   sudo ÐH bash
   cd vpp_config
   python setup.py sdist bdist_wheel
   twine upload dist/*

 Example Run:

 # pip install vpp-config
 # vpp-config

 Welcome to the VPP system configuration utility

 These are the files we will modify:
     /etc/vpp/startup.conf
     /etc/sysctl.d/80-vpp.conf
     /etc/default/grub

 Before we change them, we'll create working copies in /usr/local/vpp/vpp-config/dryrun
 Please inspect them carefully before applying the actual configuration (option 3)!

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: 1

 ==============================
 NODE: DUT1

 CPU:
           Model name:    Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
               CPU(s):    32
   Thread(s) per core:    2
   Core(s) per socket:    8
            Socket(s):    2
    NUMA node0 CPU(s):    0-7,16-23
    NUMA node1 CPU(s):    8-15,24-31
          CPU max MHz:    3600.0000
          CPU min MHz:    1200.0000
                  SMT:    Enabled

 VPP Threads: (Name: Cpu Number)

 Grub Command Line:
   Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
   Configured: GRUB_CMDLINE_LINUX_DEFAULT=""

 Huge Pages:
   Total System Memory           : 65863484 kB
   Total Free Memory             : 41325924 kB
   Actual Huge Page Total        : 8192
   Configured Huge Page Total    : 1024
   Huge Pages Free               : 8192
   Huge Page Size                : 2048 kB

 Devices:

 Status:
   Not Installed

 ==============================

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: 4

 There are no VPP packages on node localhost.
 Do you want to install VPP [Y/n]?
 INFO:root: Local Command: ls /etc/apt/sources.list.d/99fd.io.list.orig
 INFO:root:  /etc/apt/sources.list.d/99fd.io.list.orig
 ÉÉ..

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: 1

 ==============================
 NODE: DUT1

 CPU:
           Model name:    Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
               CPU(s):    32
   Thread(s) per core:    2
   Core(s) per socket:    8
            Socket(s):    2
    NUMA node0 CPU(s):    0-7,16-23
    NUMA node1 CPU(s):    8-15,24-31
          CPU max MHz:    3600.0000
          CPU min MHz:    1200.0000
                  SMT:    Enabled

 VPP Threads: (Name: Cpu Number)
   vpp_main  : 0
   vpp_stats : 0

 Grub Command Line:
   Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
   Configured: GRUB_CMDLINE_LINUX_DEFAULT=""

 Huge Pages:
   Total System Memory           : 65863484 kB
   Total Free Memory             : 55877364 kB
   Actual Huge Page Total        : 1024
   Configured Huge Page Total    : 1024
   Huge Pages Free               : 1024
   Huge Page Size                : 2048 kB

 Devices:
 Name                           Socket RXQs RXDescs TXQs TXDescs

 Status:
   active (running)

 ==============================

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: 2

 These device(s) are currently NOT being used by VPP or the OS.

 PCI ID          Description
 ----------------------------------------------------------------
 0000:02:00.0    82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:02:00.1    82599ES 10-Gigabit SFI/SFP+ Network Connection

 Would you like to give any of these devices back to the OS [y/N]? y
 Would you like to use device 0000:02:00.0 for the OS [y/N]? y
 Would you like to use device 0000:02:00.1 for the OS [y/N]? y

 These devices have kernel interfaces, but appear to be safe to use with VPP.

 PCI ID          Kernel Interface(s)       Description
 ------------------------------------------------------------------------------------------
 0000:90:00.0    enp144s0                  VIC Ethernet NIC
 0000:8f:00.0    enp143s0                  VIC Ethernet NIC
 0000:84:00.0    enp132s0f0,enp132s0f0d1   Ethernet Controller XL710 for 40GbE QSFP+
 0000:84:00.1    enp132s0f1,enp132s0f1d1   Ethernet Controller XL710 for 40GbE QSFP+
 0000:08:00.1    enp8s0f1                  I350 Gigabit Network Connection
 0000:02:00.0    enp2s0f0                  82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:02:00.1    enp2s0f1                  82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:86:00.0    enp134s0f0                82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:86:00.1    enp134s0f1                82599ES 10-Gigabit SFI/SFP+ Network Connection

 Would you like to use any of these device(s) for VPP [y/N]? y
 Would you like to use device 0000:90:00.0 for VPP [y/N]?
 Would you like to use device 0000:8f:00.0 for VPP [y/N]?
 Would you like to use device 0000:84:00.0 for VPP [y/N]?
 Would you like to use device 0000:84:00.1 for VPP [y/N]?
 Would you like to use device 0000:08:00.1 for VPP [y/N]?
 Would you like to use device 0000:02:00.0 for VPP [y/N]? y
 Would you like to use device 0000:02:00.1 for VPP [y/N]? y
 Would you like to use device 0000:86:00.0 for VPP [y/N]? y
 Would you like to use device 0000:86:00.1 for VPP [y/N]? y

 These device(s) will be used by VPP.

 PCI ID          Description
 ----------------------------------------------------------------
 0000:86:00.0    82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:86:00.1    82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:02:00.0    82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:02:00.1    82599ES 10-Gigabit SFI/SFP+ Network Connection

 Would you like to remove any of these device(s) [y/N]?

 These device(s) will be used by VPP, please rerun this option if this is incorrect.

 PCI ID          Description
 ----------------------------------------------------------------
 0000:86:00.0    82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:86:00.1    82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:02:00.0    82599ES 10-Gigabit SFI/SFP+ Network Connection
 0000:02:00.1    82599ES 10-Gigabit SFI/SFP+ Network Connection

 Your system has 32 core(s) and 2 Numa Nodes.
 To begin, we suggest not reserving any cores for VPP or other processes.
 Then to improve performance try reserving cores as needed.

 How many core(s) do you want to reserve for processes other than VPP? [0-16][0]? 4
 How many core(s) shall we reserve for VPP workers[0-4][0]? 2
 Should we reserve 1 core for the VPP Main thread? [Y/n]?

 There currently 1024 2048 kB huge pages free.
 Do you want to reconfigure the number of huge pages [y/N]? y

 There currently a total of 1024 huge pages.
 How many huge pages do you want [1024 - 22511][1024]? 8192

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: 3

 We are now going to configure your system(s).

 Are you sure you want to do this [Y/n]?
 These are the changes we will apply to
 the huge page file (/etc/sysctl.d/80-vpp.conf).

 1,2d0
 < # Number of 2MB hugepages desired
 < vm.nr_hugepages=1024
 4,7c2,3
 < # Must be greater than or equal to (2 * vm.nr_hugepages).
 < vm.max_map_count=3096
 <
 < # All groups allowed to access hugepages
 ---
 > vm.nr_hugepages=8192
 > vm.max_map_count=17408
 8a5
 > kernel.shmmax=17179869184
 10,15d6
 < # Shared Memory Max must be greator or equal to the total size of hugepages.
 < # For 2MB pages, TotalHugepageSize = vm.nr_hugepages * 2 * 1024 * 1024
 < # If the existing kernel.shmmax setting  (cat /sys/proc/kernel/shmmax)
 < # is greater than the calculated TotalHugepageSize then set this parameter
 < # to current shmmax value.
 < kernel.shmmax=2147483648


 Are you sure you want to apply these changes [Y/n]?
 These are the changes we will apply to
 the VPP startup file (/etc/vpp/startup.conf).

 3c3
 <   nodaemon
 ---
 >   interactive
 5a6
 >   cli-listen /run/vpp/cli.sock
 17c18,25
 < 	## In the VPP there is one main thread and optionally the user can create worker(s)
 ---
 >
 >   main-core 8
 >   corelist-workers 9-10,5-6
 >
 >   scheduler-policy fifo
 >   scheduler-priority 50
 >
 >         ## In the VPP there is one main thread and optionally the user can create worker(s)
 52,53c60,76
 < # dpdk {
 < 	## Change default settings for all intefaces
 ---
 > dpdk {
 >
 >   dev 0000:86:00.0 {
 >     num-rx-queues 2
 >   }
 >   dev 0000:86:00.1 {
 >     num-rx-queues 2
 >   }
 >   dev 0000:02:00.0 {
 >     num-rx-queues 2
 >   }
 >   dev 0000:02:00.1 {
 >     num-rx-queues 2
 >   }
 >   num-mbufs 71680
 >
 >         ## Change default settings for all intefaces
 82a106,115
 > 	## Specify bonded interface and its slaves via PCI addresses
 > 	##
 >         ## Bonded interface in XOR load balance mode (mode 2) with L3 and L4 headers
 > 	# vdev eth_bond0,mode=2,slave=0000:02:00.0,slave=0000:03:00.0,xmit_policy=l34
 > 	# vdev eth_bond1,mode=2,slave=0000:02:00.1,slave=0000:03:00.1,xmit_policy=l34
 > 	##
 > 	## Bonded interface in Active-Back up mode (mode 1)
 > 	# vdev eth_bond0,mode=1,slave=0000:02:00.0,slave=0000:03:00.0
 > 	# vdev eth_bond1,mode=1,slave=0000:02:00.1,slave=0000:03:00.1
 >
 99c132
 < # }
 ---
 > }
 108a142
 >


 Are you sure you want to apply these changes [Y/n]?

 The configured grub cmdline looks like this:
 GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable isolcpus=1-4,8,9-10,5-6 nohz_full=1-4,8,9-10,5-6 rcu_nocbs=1-4,8,9-10,5-6"

 The current boot cmdline looks like this:
 BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro

 Do you want to keep the current boot cmdline [Y/n]?

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: 1

 ==============================
 NODE: DUT1

 CPU:
           Model name:    Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
               CPU(s):    32
   Thread(s) per core:    2
   Core(s) per socket:    8
            Socket(s):    2
    NUMA node0 CPU(s):    0-7,16-23
    NUMA node1 CPU(s):    8-15,24-31
          CPU max MHz:    3600.0000
          CPU min MHz:    1200.0000
                  SMT:    Enabled

 VPP Threads: (Name: Cpu Number)

 Grub Command Line:
   Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
   Configured: GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable isolcpus=1-4,8,9-10,5-6 nohz_full=1-4,8,9-10,5-6 rcu_nocbs=1-4,8,9-10,5-6"

 Huge Pages:
   Total System Memory           : 65863484 kB
   Total Free Memory             : 41163916 kB
   Actual Huge Page Total        : 8192
   Configured Huge Page Total    : 8192
   Huge Pages Free               : 3108
   Huge Page Size                : 2048 kB

 Devices:
 Total Number of Buffers: 71680

 Status:
   active (running)
   Sep 27 12:49:59 tf-ucs-3 vpp[13671]: EAL: No free hugepages reported in hugepages-1048576kB

 ==============================

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: 1

 ==============================
 NODE: DUT1

 CPU:
           Model name:    Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
               CPU(s):    32
   Thread(s) per core:    2
   Core(s) per socket:    8
            Socket(s):    2
    NUMA node0 CPU(s):    0-7,16-23
    NUMA node1 CPU(s):    8-15,24-31
          CPU max MHz:    3600.0000
          CPU min MHz:    1200.0000
                  SMT:    Enabled

 VPP Threads: (Name: Cpu Number)
   vpp_stats : 0
   vpp_wk_2  : 9
   vpp_wk_3  : 10
   vpp_wk_0  : 5
   vpp_wk_1  : 6
   vpp_main  : 8

 Grub Command Line:
   Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
   Configured: GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable isolcpus=1-4,8,9-10,5-6 nohz_full=1-4,8,9-10,5-6 rcu_nocbs=1-4,8,9-10,5-6"

 Huge Pages:
   Total System Memory           : 65863484 kB
   Total Free Memory             : 41170684 kB
   Actual Huge Page Total        : 8192
   Configured Huge Page Total    : 8192
   Huge Pages Free               : 7936
   Huge Page Size                : 2048 kB

 Devices:
 Total Number of Buffers: 71680
 Name                           Socket RXQs RXDescs TXQs TXDescs
 TenGigabitEthernet2/0/0             0    2    1024    5    1024
 TenGigabitEthernet2/0/1             0    2    1024    5    1024
 TenGigabitEthernet86/0/0            1    2    1024    5    1024
 TenGigabitEthernet86/0/1            1    2    1024    5    1024

 Status:
   active (running)

 ==============================

 What would you like to do?

 1) Show basic system information
 2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
        and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
 3) Full configuration (WARNING: This will change the system configuration)
 4) Install/Uninstall VPP.
 5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
 6) Install QEMU patch (Needed when running openstack).
 9 or q) Quit

 Command: q
 #
	Summary:

	The purpose of the VPP configuration utility is to allow the user to configure
	VPP in a simple and safe manner. The utility takes input from the user and
	then modifies the key configuration files. The user can then examine these files
	to be sure they are correct and then actually apply the configuration. The user
	can also install a released and stable version of VPP. This is currently
	released with release 17.10.

	Use:

	The installation and executing of the VPP configuration utility is simple. First
	install the python pip module. Using pip install, then pip install vpp-config.
	Then simply type Òvpp-configÓ and answer the questions. If you are not sure what
	to answer choose the default. For yes or no questions the capital letter
	designates the default. For example, for a question that shows [Y/n] Y is the
	default. For numbers the default is within the brackets for example for a
	question that shows [1024]. 1024 is the default.

	The flow of the utility is to inspect the system, if VPP is not install it,
	create dry run configurations, inspect the files created during the dry run,
	apply the configuration and then inspect the system again and then repeat.

	Caveats:

	- Supports Ubuntu, centos7, RedHat is coming shortly.

	For Developers:

	Modifying the code is reasonable simple. The process would be edit and debug the
	code from the root directory. In order to do this, we need a script that will copy
	or data files to the proper place. This is where they end up with pip install. For
	Ubuntu, this is /usr/local/vpp/vpp-config. I have provided a script that will copy
	the relevant files correctly. I have also provided a script that will clean the
	environment so you can start from scratch. These are the steps to run the utility
	in this environment. The scripts are meant to be run from the root directory.

	./scripts/clean.sh
	./scripts/cp-data.sh
	./vpp_config.py

	When the utility is installed with pip the wrapper scripts/vpp-config is written to
	/usr/local/bin. However, the starting point when debugging this script locally is
	./vpp_config.py. Run the utility by executing ./vpp_config.py from the root directory.

	The start point in the code is in vpp_config.py. However, most of the work is done in
	the files in ./vpplib

	Uploading to PyPi:

	To upload this utility to PpPi simple do the following. Currently, I have my own account
	when we want everyone to contribute we will need to change that.

	sudo ÐH bash
	cd vpp_config
	python setup.py sdist bdist_wheel
	twine upload dist/*

	Example Run:

	# pip install vpp-config
	# vpp-config

	Welcome to the VPP system configuration utility

	These are the files we will modify:
	/etc/vpp/startup.conf
	/etc/sysctl.d/80-vpp.conf
	/etc/default/grub

	Before we change them, we'll create working copies in /usr/local/vpp/vpp-config/dryrun
	Please inspect them carefully before applying the actual configuration (option 3)!

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: 1

	==============================
	NODE: DUT1

	CPU:
	Model name: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
	CPU(s): 32
	Thread(s) per core: 2
	Core(s) per socket: 8
	Socket(s): 2
	NUMA node0 CPU(s): 0-7,16-23
	NUMA node1 CPU(s): 8-15,24-31
	CPU max MHz: 3600.0000
	CPU min MHz: 1200.0000
	SMT: Enabled

	VPP Threads: (Name: Cpu Number)

	Grub Command Line:
	Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
	Configured: GRUB_CMDLINE_LINUX_DEFAULT=""

	Huge Pages:
	Total System Memory : 65863484 kB
	Total Free Memory : 41325924 kB
	Actual Huge Page Total : 8192
	Configured Huge Page Total : 1024
	Huge Pages Free : 8192
	Huge Page Size : 2048 kB

	Devices:

	Status:
	Not Installed

	==============================

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: 4

	There are no VPP packages on node localhost.
	Do you want to install VPP [Y/n]?
	INFO:root: Local Command: ls /etc/apt/sources.list.d/99fd.io.list.orig
	INFO:root: /etc/apt/sources.list.d/99fd.io.list.orig
	ÉÉ..

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: 1

	==============================
	NODE: DUT1

	CPU:
	Model name: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
	CPU(s): 32
	Thread(s) per core: 2
	Core(s) per socket: 8
	Socket(s): 2
	NUMA node0 CPU(s): 0-7,16-23
	NUMA node1 CPU(s): 8-15,24-31
	CPU max MHz: 3600.0000
	CPU min MHz: 1200.0000
	SMT: Enabled

	VPP Threads: (Name: Cpu Number)
	vpp_main : 0
	vpp_stats : 0

	Grub Command Line:
	Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
	Configured: GRUB_CMDLINE_LINUX_DEFAULT=""

	Huge Pages:
	Total System Memory : 65863484 kB
	Total Free Memory : 55877364 kB
	Actual Huge Page Total : 1024
	Configured Huge Page Total : 1024
	Huge Pages Free : 1024
	Huge Page Size : 2048 kB

	Devices:
	Name Socket RXQs RXDescs TXQs TXDescs

	Status:
	active (running)

	==============================

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: 2

	These device(s) are currently NOT being used by VPP or the OS.

	PCI ID Description
	----------------------------------------------------------------
	0000:02:00.0 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:02:00.1 82599ES 10-Gigabit SFI/SFP+ Network Connection

	Would you like to give any of these devices back to the OS [y/N]? y
	Would you like to use device 0000:02:00.0 for the OS [y/N]? y
	Would you like to use device 0000:02:00.1 for the OS [y/N]? y

	These devices have kernel interfaces, but appear to be safe to use with VPP.

	PCI ID Kernel Interface(s) Description
	------------------------------------------------------------------------------------------
	0000:90:00.0 enp144s0 VIC Ethernet NIC
	0000:8f:00.0 enp143s0 VIC Ethernet NIC
	0000:84:00.0 enp132s0f0,enp132s0f0d1 Ethernet Controller XL710 for 40GbE QSFP+
	0000:84:00.1 enp132s0f1,enp132s0f1d1 Ethernet Controller XL710 for 40GbE QSFP+
	0000:08:00.1 enp8s0f1 I350 Gigabit Network Connection
	0000:02:00.0 enp2s0f0 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:02:00.1 enp2s0f1 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:86:00.0 enp134s0f0 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:86:00.1 enp134s0f1 82599ES 10-Gigabit SFI/SFP+ Network Connection

	Would you like to use any of these device(s) for VPP [y/N]? y
	Would you like to use device 0000:90:00.0 for VPP [y/N]?
	Would you like to use device 0000:8f:00.0 for VPP [y/N]?
	Would you like to use device 0000:84:00.0 for VPP [y/N]?
	Would you like to use device 0000:84:00.1 for VPP [y/N]?
	Would you like to use device 0000:08:00.1 for VPP [y/N]?
	Would you like to use device 0000:02:00.0 for VPP [y/N]? y
	Would you like to use device 0000:02:00.1 for VPP [y/N]? y
	Would you like to use device 0000:86:00.0 for VPP [y/N]? y
	Would you like to use device 0000:86:00.1 for VPP [y/N]? y

	These device(s) will be used by VPP.

	PCI ID Description
	----------------------------------------------------------------
	0000:86:00.0 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:86:00.1 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:02:00.0 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:02:00.1 82599ES 10-Gigabit SFI/SFP+ Network Connection

	Would you like to remove any of these device(s) [y/N]?

	These device(s) will be used by VPP, please rerun this option if this is incorrect.

	PCI ID Description
	----------------------------------------------------------------
	0000:86:00.0 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:86:00.1 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:02:00.0 82599ES 10-Gigabit SFI/SFP+ Network Connection
	0000:02:00.1 82599ES 10-Gigabit SFI/SFP+ Network Connection

	Your system has 32 core(s) and 2 Numa Nodes.
	To begin, we suggest not reserving any cores for VPP or other processes.
	Then to improve performance try reserving cores as needed.

	How many core(s) do you want to reserve for processes other than VPP? [0-16][0]? 4
	How many core(s) shall we reserve for VPP workers[0-4][0]? 2
	Should we reserve 1 core for the VPP Main thread? [Y/n]?

	There currently 1024 2048 kB huge pages free.
	Do you want to reconfigure the number of huge pages [y/N]? y

	There currently a total of 1024 huge pages.
	How many huge pages do you want [1024 - 22511][1024]? 8192

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: 3

	We are now going to configure your system(s).

	Are you sure you want to do this [Y/n]?
	These are the changes we will apply to
	the huge page file (/etc/sysctl.d/80-vpp.conf).

	1,2d0
	< # Number of 2MB hugepages desired
	< vm.nr_hugepages=1024
	4,7c2,3
	< # Must be greater than or equal to (2 * vm.nr_hugepages).
	< vm.max_map_count=3096
	<
	< # All groups allowed to access hugepages
	---
	> vm.nr_hugepages=8192
	> vm.max_map_count=17408
	8a5
	> kernel.shmmax=17179869184
	10,15d6
	< # Shared Memory Max must be greator or equal to the total size of hugepages.
	< # For 2MB pages, TotalHugepageSize = vm.nr_hugepages * 2 * 1024 * 1024
	< # If the existing kernel.shmmax setting (cat /sys/proc/kernel/shmmax)
	< # is greater than the calculated TotalHugepageSize then set this parameter
	< # to current shmmax value.
	< kernel.shmmax=2147483648


	Are you sure you want to apply these changes [Y/n]?
	These are the changes we will apply to
	the VPP startup file (/etc/vpp/startup.conf).

	3c3
	< nodaemon
	---
	> interactive
	5a6
	> cli-listen /run/vpp/cli.sock
	17c18,25
	< ## In the VPP there is one main thread and optionally the user can create worker(s)
	---
	>
	> main-core 8
	> corelist-workers 9-10,5-6
	>
	> scheduler-policy fifo
	> scheduler-priority 50
	>
	> ## In the VPP there is one main thread and optionally the user can create worker(s)
	52,53c60,76
	< # dpdk {
	< ## Change default settings for all intefaces
	---
	> dpdk {
	>
	> dev 0000:86:00.0 {
	> num-rx-queues 2
	> }
	> dev 0000:86:00.1 {
	> num-rx-queues 2
	> }
	> dev 0000:02:00.0 {
	> num-rx-queues 2
	> }
	> dev 0000:02:00.1 {
	> num-rx-queues 2
	> }
	> num-mbufs 71680
	>
	> ## Change default settings for all intefaces
	82a106,115
	> ## Specify bonded interface and its slaves via PCI addresses
	> ##
	> ## Bonded interface in XOR load balance mode (mode 2) with L3 and L4 headers
	> # vdev eth_bond0,mode=2,slave=0000:02:00.0,slave=0000:03:00.0,xmit_policy=l34
	> # vdev eth_bond1,mode=2,slave=0000:02:00.1,slave=0000:03:00.1,xmit_policy=l34
	> ##
	> ## Bonded interface in Active-Back up mode (mode 1)
	> # vdev eth_bond0,mode=1,slave=0000:02:00.0,slave=0000:03:00.0
	> # vdev eth_bond1,mode=1,slave=0000:02:00.1,slave=0000:03:00.1
	>
	99c132
	< # }
	---
	> }
	108a142
	>


	Are you sure you want to apply these changes [Y/n]?

	The configured grub cmdline looks like this:
	GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable isolcpus=1-4,8,9-10,5-6 nohz_full=1-4,8,9-10,5-6 rcu_nocbs=1-4,8,9-10,5-6"

	The current boot cmdline looks like this:
	BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro

	Do you want to keep the current boot cmdline [Y/n]?

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: 1

	==============================
	NODE: DUT1

	CPU:
	Model name: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
	CPU(s): 32
	Thread(s) per core: 2
	Core(s) per socket: 8
	Socket(s): 2
	NUMA node0 CPU(s): 0-7,16-23
	NUMA node1 CPU(s): 8-15,24-31
	CPU max MHz: 3600.0000
	CPU min MHz: 1200.0000
	SMT: Enabled

	VPP Threads: (Name: Cpu Number)

	Grub Command Line:
	Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
	Configured: GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable isolcpus=1-4,8,9-10,5-6 nohz_full=1-4,8,9-10,5-6 rcu_nocbs=1-4,8,9-10,5-6"

	Huge Pages:
	Total System Memory : 65863484 kB
	Total Free Memory : 41163916 kB
	Actual Huge Page Total : 8192
	Configured Huge Page Total : 8192
	Huge Pages Free : 3108
	Huge Page Size : 2048 kB

	Devices:
	Total Number of Buffers: 71680

	Status:
	active (running)
	Sep 27 12:49:59 tf-ucs-3 vpp[13671]: EAL: No free hugepages reported in hugepages-1048576kB

	==============================

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: 1

	==============================
	NODE: DUT1

	CPU:
	Model name: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz
	CPU(s): 32
	Thread(s) per core: 2
	Core(s) per socket: 8
	Socket(s): 2
	NUMA node0 CPU(s): 0-7,16-23
	NUMA node1 CPU(s): 8-15,24-31
	CPU max MHz: 3600.0000
	CPU min MHz: 1200.0000
	SMT: Enabled

	VPP Threads: (Name: Cpu Number)
	vpp_stats : 0
	vpp_wk_2 : 9
	vpp_wk_3 : 10
	vpp_wk_0 : 5
	vpp_wk_1 : 6
	vpp_main : 8

	Grub Command Line:
	Current: BOOT_IMAGE=/boot/vmlinuz-4.4.0-96-generic root=UUID=d760b82f-f37b-47e2-9815-db8d479a3557 ro
	Configured: GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable isolcpus=1-4,8,9-10,5-6 nohz_full=1-4,8,9-10,5-6 rcu_nocbs=1-4,8,9-10,5-6"

	Huge Pages:
	Total System Memory : 65863484 kB
	Total Free Memory : 41170684 kB
	Actual Huge Page Total : 8192
	Configured Huge Page Total : 8192
	Huge Pages Free : 7936
	Huge Page Size : 2048 kB

	Devices:
	Total Number of Buffers: 71680
	Name Socket RXQs RXDescs TXQs TXDescs
	TenGigabitEthernet2/0/0 0 2 1024 5 1024
	TenGigabitEthernet2/0/1 0 2 1024 5 1024
	TenGigabitEthernet86/0/0 1 2 1024 5 1024
	TenGigabitEthernet86/0/1 1 2 1024 5 1024

	Status:
	active (running)

	==============================

	What would you like to do?

	1) Show basic system information
	2) Dry Run (Will save the configuration files in /usr/local/vpp/vpp-config/dryrun for inspection)
	and user input in /usr/local/vpp/vpp-config/configs/auto-config.yaml
	3) Full configuration (WARNING: This will change the system configuration)
	4) Install/Uninstall VPP.
	5) Dry Run from /usr/local/vpp/vpp-config/auto-config.yaml (will not ask questions).
	6) Install QEMU patch (Needed when running openstack).
	9 or q) Quit

	Command: q
	#