| #!/usr/bin/env python |
| |
| import unittest |
| import socket |
| |
| from framework import VppTestCase, VppTestRunner |
| from vpp_ip_route import VppIpRoute, VppRoutePath, VppMplsRoute, \ |
| VppMplsIpBind, VppIpMRoute, VppMRoutePath, \ |
| MRouteItfFlags, MRouteEntryFlags |
| from vpp_mpls_tunnel_interface import VppMPLSTunnelInterface |
| |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether |
| from scapy.layers.inet import IP, UDP, ICMP |
| from scapy.layers.inet6 import IPv6 |
| from scapy.contrib.mpls import MPLS |
| |
| |
| class TestMPLS(VppTestCase): |
| """ MPLS Test Case """ |
| |
| def setUp(self): |
| super(TestMPLS, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| # setup both interfaces |
| # assign them different tables. |
| table_id = 0 |
| |
| for i in self.pg_interfaces: |
| i.admin_up() |
| i.set_table_ip4(table_id) |
| i.set_table_ip6(table_id) |
| i.config_ip4() |
| i.resolve_arp() |
| i.config_ip6() |
| i.resolve_ndp() |
| i.enable_mpls() |
| table_id += 1 |
| |
| def tearDown(self): |
| super(TestMPLS, self).tearDown() |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.ip6_disable() |
| i.admin_down() |
| |
| # the default of 64 matches the IP packet TTL default |
| def create_stream_labelled_ip4( |
| self, |
| src_if, |
| mpls_labels, |
| mpls_ttl=255, |
| ping=0, |
| ip_itf=None, |
| dst_ip=None, |
| n=257): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, n): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| |
| for ii in range(len(mpls_labels)): |
| if ii == len(mpls_labels) - 1: |
| p = p / MPLS(label=mpls_labels[ii], ttl=mpls_ttl, s=1) |
| else: |
| p = p / MPLS(label=mpls_labels[ii], ttl=mpls_ttl, s=0) |
| if not ping: |
| if not dst_ip: |
| p = (p / IP(src=src_if.local_ip4, dst=src_if.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| else: |
| p = (p / IP(src=src_if.local_ip4, dst=dst_ip) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| else: |
| p = (p / IP(src=ip_itf.remote_ip4, |
| dst=ip_itf.local_ip4) / |
| ICMP()) |
| |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_ip4(self, src_if, dst_ip): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, 257): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| IP(src=src_if.remote_ip4, dst=dst_ip) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_labelled_ip6(self, src_if, mpls_label, mpls_ttl): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, 257): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| MPLS(label=mpls_label, ttl=mpls_ttl) / |
| IPv6(src=src_if.remote_ip6, dst=src_if.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| @staticmethod |
| def verify_filter(capture, sent): |
| if not len(capture) == len(sent): |
| # filter out any IPv6 RAs from the capture |
| for p in capture: |
| if p.haslayer(IPv6): |
| capture.remove(p) |
| return capture |
| |
| def verify_capture_ip4(self, src_if, capture, sent, ping_resp=0): |
| try: |
| capture = self.verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x800) |
| |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| if not ping_resp: |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| else: |
| self.assertEqual(rx_ip.src, tx_ip.dst) |
| self.assertEqual(rx_ip.dst, tx_ip.src) |
| |
| except: |
| raise |
| |
| def verify_mpls_stack(self, rx, mpls_labels, ttl=255, num=0): |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x8847) |
| |
| rx_mpls = rx[MPLS] |
| |
| for ii in range(len(mpls_labels)): |
| self.assertEqual(rx_mpls.label, mpls_labels[ii]) |
| self.assertEqual(rx_mpls.cos, 0) |
| if ii == num: |
| self.assertEqual(rx_mpls.ttl, ttl) |
| else: |
| self.assertEqual(rx_mpls.ttl, 255) |
| |
| if ii == len(mpls_labels) - 1: |
| self.assertEqual(rx_mpls.s, 1) |
| else: |
| # not end of stack |
| self.assertEqual(rx_mpls.s, 0) |
| # pop the label to expose the next |
| rx_mpls = rx_mpls[MPLS].payload |
| |
| def verify_capture_labelled_ip4(self, src_if, capture, sent, |
| mpls_labels): |
| try: |
| capture = self.verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| # the MPLS TTL is copied from the IP |
| self.verify_mpls_stack( |
| rx, mpls_labels, rx_ip.ttl, len(mpls_labels) - 1) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_tunneled_ip4(self, src_if, capture, sent, mpls_labels): |
| try: |
| capture = self.verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| # the MPLS TTL is 255 since it enters a new tunnel |
| self.verify_mpls_stack( |
| rx, mpls_labels, 255, len(mpls_labels) - 1) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_labelled(self, src_if, capture, sent, |
| mpls_labels, ttl=254, num=0): |
| try: |
| capture = self.verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| rx = capture[i] |
| self.verify_mpls_stack(rx, mpls_labels, ttl, num) |
| except: |
| raise |
| |
| def verify_capture_ip6(self, src_if, capture, sent): |
| try: |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x86DD) |
| |
| tx_ip = tx[IPv6] |
| rx_ip = rx[IPv6] |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim) |
| |
| except: |
| raise |
| |
| def send_and_assert_no_replies(self, intf, pkts, remark): |
| intf.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| for i in self.pg_interfaces: |
| i.assert_nothing_captured(remark=remark) |
| |
| def test_swap(self): |
| """ MPLS label swap tests """ |
| |
| # |
| # A simple MPLS xconnect - eos label in label out |
| # |
| route_32_eos = VppMplsRoute(self, 32, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[33])]) |
| route_32_eos.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [32]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled(self.pg0, rx, tx, [33]) |
| |
| # |
| # A simple MPLS xconnect - non-eos label in label out |
| # |
| route_32_neos = VppMplsRoute(self, 32, 0, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[33])]) |
| route_32_neos.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [32, 99]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled(self.pg0, rx, tx, [33, 99]) |
| |
| # |
| # An MPLS xconnect - EOS label in IP out |
| # |
| route_33_eos = VppMplsRoute(self, 33, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[])]) |
| route_33_eos.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [33]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_ip4(self.pg0, rx, tx) |
| |
| # |
| # An MPLS xconnect - non-EOS label in IP out - an invalid configuration |
| # so this traffic should be dropped. |
| # |
| route_33_neos = VppMplsRoute(self, 33, 0, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[])]) |
| route_33_neos.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [33, 99]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| self.pg0.assert_nothing_captured( |
| remark="MPLS non-EOS packets popped and forwarded") |
| |
| # |
| # A recursive EOS x-connect, which resolves through another x-connect |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_via_label=32, |
| labels=[44, 45])]) |
| route_34_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, [34]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled(self.pg0, rx, tx, [33, 44, 45], num=2) |
| |
| # |
| # A recursive non-EOS x-connect, which resolves through another |
| # x-connect |
| # |
| route_34_neos = VppMplsRoute(self, 34, 0, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_via_label=32, |
| labels=[44, 46])]) |
| route_34_neos.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [34, 99]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| # it's the 2nd (counting from 0) label in the stack that is swapped |
| self.verify_capture_labelled(self.pg0, rx, tx, [33, 44, 46, 99], num=2) |
| |
| # |
| # an recursive IP route that resolves through the recursive non-eos |
| # x-connect |
| # |
| ip_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_via_label=34, |
| labels=[55])]) |
| ip_10_0_0_1.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [33, 44, 46, 55]) |
| |
| ip_10_0_0_1.remove_vpp_config() |
| route_34_neos.remove_vpp_config() |
| route_34_eos.remove_vpp_config() |
| route_33_neos.remove_vpp_config() |
| route_33_eos.remove_vpp_config() |
| route_32_neos.remove_vpp_config() |
| route_32_eos.remove_vpp_config() |
| |
| def test_bind(self): |
| """ MPLS Local Label Binding test """ |
| |
| # |
| # Add a non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[45])]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # bind a local label to the route |
| binding = VppMplsIpBind(self, 44, "10.0.0.1", 32) |
| binding.add_vpp_config() |
| |
| # non-EOS stream |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [44, 99]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled(self.pg0, rx, tx, [45, 99]) |
| |
| # EOS stream |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [44]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled(self.pg0, rx, tx, [45]) |
| |
| # IP stream |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [45]) |
| |
| # |
| # cleanup |
| # |
| binding.remove_vpp_config() |
| route_10_0_0_1.remove_vpp_config() |
| |
| def test_imposition(self): |
| """ MPLS label imposition test """ |
| |
| # |
| # Add a non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[32])]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [32]) |
| |
| # |
| # Add a non-recursive route with a 3 out labels |
| # |
| route_10_0_0_2 = VppIpRoute(self, "10.0.0.2", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[32, 33, 34])]) |
| route_10_0_0_2.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.2") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [32, 33, 34]) |
| |
| # |
| # add a recursive path, with output label, via the 1 label route |
| # |
| route_11_0_0_1 = VppIpRoute(self, "11.0.0.1", 32, |
| [VppRoutePath("10.0.0.1", |
| 0xffffffff, |
| labels=[44])]) |
| route_11_0_0_1.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 11.0.0.1, should pick up |
| # the label stack for 11.0.0.1 and 10.0.0.1 |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "11.0.0.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [32, 44]) |
| |
| # |
| # add a recursive path, with 2 labels, via the 3 label route |
| # |
| route_11_0_0_2 = VppIpRoute(self, "11.0.0.2", 32, |
| [VppRoutePath("10.0.0.2", |
| 0xffffffff, |
| labels=[44, 45])]) |
| route_11_0_0_2.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 11.0.0.1, should pick up |
| # the label stack for 11.0.0.1 and 10.0.0.1 |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "11.0.0.2") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_labelled_ip4( |
| self.pg0, rx, tx, [32, 33, 34, 44, 45]) |
| |
| # |
| # cleanup |
| # |
| route_11_0_0_2.remove_vpp_config() |
| route_11_0_0_1.remove_vpp_config() |
| route_10_0_0_2.remove_vpp_config() |
| route_10_0_0_1.remove_vpp_config() |
| |
| def test_tunnel(self): |
| """ MPLS Tunnel Tests """ |
| |
| # |
| # Create a tunnel with a single out label |
| # |
| mpls_tun = VppMPLSTunnelInterface(self, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[44, 46])]) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun._sw_if_index)]) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [44, 46]) |
| |
| def test_v4_exp_null(self): |
| """ MPLS V4 Explicit NULL test """ |
| |
| # |
| # The first test case has an MPLS TTL of 0 |
| # all packet should be dropped |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, [0], 0) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| self.pg0.assert_nothing_captured(remark="MPLS TTL=0 packets forwarded") |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, [0]) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_ip4(self.pg0, rx, tx) |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG1 is in table 1 |
| # we are ensuring the post-pop lookup occurs in the VRF table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg1, [0]) |
| self.pg1.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture() |
| self.verify_capture_ip4(self.pg0, rx, tx) |
| |
| def test_v6_exp_null(self): |
| """ MPLS V6 Explicit NULL test """ |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip6(self.pg0, 2, 2) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG1 is in table 1 |
| # we are ensuring the post-pop lookup occurs in the VRF table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip6(self.pg1, 2, 2) |
| self.pg1.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture() |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| def test_deag(self): |
| """ MPLS Deagg """ |
| |
| # |
| # A de-agg route - next-hop lookup in default table |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_table_id=0)]) |
| route_34_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [34], ping=1, |
| ip_itf=self.pg0) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_ip4(self.pg0, rx, tx, ping_resp=1) |
| |
| # |
| # A de-agg route - next-hop lookup in non-default table |
| # |
| route_35_eos = VppMplsRoute(self, 35, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_table_id=1)]) |
| route_35_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the non-default table |
| # PG0 is in the default table. packet arrive labelled in the |
| # default table and egress unlabelled in the non-default |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [35], ping=1, ip_itf=self.pg1) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| packet_count = self.get_packet_count_for_if_idx(self.pg0.sw_if_index) |
| rx = self.pg1.get_capture(packet_count) |
| self.verify_capture_ip4(self.pg1, rx, tx, ping_resp=1) |
| |
| route_35_eos.remove_vpp_config() |
| route_34_eos.remove_vpp_config() |
| |
| def test_interface_rx(self): |
| """ MPLS Interface Receive """ |
| |
| # |
| # Add a non-recursive route that will forward the traffic |
| # post-interface-rx |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| table_id=1, |
| paths=[VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index)]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an interface-rx on pg1 and matching a route in table 1 |
| # if the packet egresses, then we must have swapped to pg1 |
| # so as to have matched the route in table 1 |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| self.pg1.sw_if_index, |
| is_interface_rx=1)]) |
| route_34_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [34], n=257, |
| dst_ip="10.0.0.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(257) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| def test_mcast_mid_point(self): |
| """ MPLS Multicast Mid Point """ |
| |
| # |
| # Add a non-recursive route that will forward the traffic |
| # post-interface-rx |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| table_id=1, |
| paths=[VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index)]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # Add a mcast entry that replicate to pg2 and pg3 |
| # and replicate to a interface-rx (like a bud node would) |
| # |
| route_3400_eos = VppMplsRoute(self, 3400, 1, |
| [VppRoutePath(self.pg2.remote_ip4, |
| self.pg2.sw_if_index, |
| labels=[3401]), |
| VppRoutePath(self.pg3.remote_ip4, |
| self.pg3.sw_if_index, |
| labels=[3402]), |
| VppRoutePath("0.0.0.0", |
| self.pg1.sw_if_index, |
| is_interface_rx=1)], |
| is_multicast=1) |
| route_3400_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [3400], n=257, |
| dst_ip="10.0.0.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(257) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_labelled(self.pg2, rx, tx, [3401]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_labelled(self.pg3, rx, tx, [3402]) |
| |
| def test_mcast_head(self): |
| """ MPLS Multicast Head-end """ |
| |
| # |
| # Create a multicast tunnel with two replications |
| # |
| mpls_tun = VppMPLSTunnelInterface(self, |
| [VppRoutePath(self.pg2.remote_ip4, |
| self.pg2.sw_if_index, |
| labels=[42]), |
| VppRoutePath(self.pg3.remote_ip4, |
| self.pg3.sw_if_index, |
| labels=[43])], |
| is_multicast=1) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun._sw_if_index)]) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [42]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [43]) |
| |
| # |
| # An an IP multicast route via the tunnel |
| # A (*,G). |
| # one accepting interface, pg0, 1 forwarding interface via the tunnel |
| # |
| route_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| [VppMRoutePath(self.pg0.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_ACCEPT), |
| VppMRoutePath(mpls_tun._sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_232_1_1_1.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "232.1.1.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [42]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [43]) |
| |
| def test_mcast_tail(self): |
| """ MPLS Multicast Tail """ |
| |
| # |
| # Add a multicast route that will forward the traffic |
| # post-disposition |
| # |
| route_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| table_id=1, |
| paths=[VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_232_1_1_1.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an rpf-id and matching a route in table 1 |
| # if the packet egresses, then we must have matched the route in |
| # table 1 |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| self.pg1.sw_if_index, |
| nh_table_id=1, |
| rpf_id=55)], |
| is_multicast=1) |
| |
| route_34_eos.add_vpp_config() |
| |
| # |
| # Drop due to interface lookup miss |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [34], |
| dst_ip="232.1.1.1", n=1) |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop none") |
| |
| # |
| # set the RPF-ID of the enrtry to match the input packet's |
| # |
| route_232_1_1_1.update_rpf_id(55) |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [34], |
| dst_ip="232.1.1.1", n=257) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(257) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| # |
| # set the RPF-ID of the enrtry to not match the input packet's |
| # |
| route_232_1_1_1.update_rpf_id(56) |
| tx = self.create_stream_labelled_ip4(self.pg0, [34], |
| dst_ip="232.1.1.1") |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop 56") |
| |
| |
| class TestMPLSDisabled(VppTestCase): |
| """ MPLS disabled """ |
| |
| def setUp(self): |
| super(TestMPLSDisabled, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(2)) |
| |
| # PG0 is MPLS enalbed |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| self.pg0.enable_mpls() |
| |
| # PG 1 is not MPLS enabled |
| self.pg1.admin_up() |
| |
| def tearDown(self): |
| super(TestMPLSDisabled, self).tearDown() |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.admin_down() |
| |
| def send_and_assert_no_replies(self, intf, pkts, remark): |
| intf.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| for i in self.pg_interfaces: |
| i.get_capture(0) |
| i.assert_nothing_captured(remark=remark) |
| |
| def test_mpls_disabled(self): |
| """ MPLS Disabled """ |
| |
| tx = (Ether(src=self.pg1.remote_mac, |
| dst=self.pg1.local_mac) / |
| MPLS(label=32, ttl=64) / |
| IPv6(src="2001::1", dst=self.pg0.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| # |
| # A simple MPLS xconnect - eos label in label out |
| # |
| route_32_eos = VppMplsRoute(self, 32, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[33])]) |
| route_32_eos.add_vpp_config() |
| |
| # |
| # PG1 does not forward IP traffic |
| # |
| self.send_and_assert_no_replies(self.pg1, tx, "MPLS disabled") |
| |
| # |
| # MPLS enable PG1 |
| # |
| self.pg1.enable_mpls() |
| |
| # |
| # Now we get packets through |
| # |
| self.pg1.add_stream(tx) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture(1) |
| |
| # |
| # Disable PG1 |
| # |
| self.pg1.disable_mpls() |
| |
| # |
| # PG1 does not forward IP traffic |
| # |
| self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled") |
| self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled") |
| |
| |
| class TestMPLSPIC(VppTestCase): |
| """ MPLS PIC edge convergence """ |
| |
| def setUp(self): |
| super(TestMPLSPIC, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| # core links |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| self.pg0.enable_mpls() |
| self.pg1.admin_up() |
| self.pg1.config_ip4() |
| self.pg1.resolve_arp() |
| self.pg1.enable_mpls() |
| |
| # VRF (customer facing) link |
| self.pg2.admin_up() |
| self.pg2.set_table_ip4(1) |
| self.pg2.config_ip4() |
| self.pg2.resolve_arp() |
| self.pg2.set_table_ip6(1) |
| self.pg2.config_ip6() |
| self.pg2.resolve_ndp() |
| self.pg3.admin_up() |
| self.pg3.set_table_ip4(1) |
| self.pg3.config_ip4() |
| self.pg3.resolve_arp() |
| self.pg3.set_table_ip6(1) |
| self.pg3.config_ip6() |
| self.pg3.resolve_ndp() |
| |
| def tearDown(self): |
| super(TestMPLSPIC, self).tearDown() |
| self.pg0.disable_mpls() |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.set_table_ip4(0) |
| i.set_table_ip6(0) |
| i.admin_down() |
| |
| def test_mpls_ibgp_pic(self): |
| """ MPLS iBGP PIC edge convergence |
| |
| 1) setup many iBGP VPN routes via a pair of iBGP peers. |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw the IGP route to one of these peers. |
| 4) check forwarding continues to the remaining peer |
| """ |
| |
| # |
| # IGP+LDP core routes |
| # |
| core_10_0_0_45 = VppIpRoute(self, "10.0.0.45", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[45])]) |
| core_10_0_0_45.add_vpp_config() |
| |
| core_10_0_0_46 = VppIpRoute(self, "10.0.0.46", 32, |
| [VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index, |
| labels=[46])]) |
| core_10_0_0_46.add_vpp_config() |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| pkts = [] |
| for ii in range(64): |
| dst = "192.168.1.%d" % ii |
| vpn_routes.append(VppIpRoute(self, dst, 32, |
| [VppRoutePath("10.0.0.45", |
| 0xffffffff, |
| labels=[145], |
| is_resolve_host=1), |
| VppRoutePath("10.0.0.46", |
| 0xffffffff, |
| labels=[146], |
| is_resolve_host=1)], |
| table_id=1)) |
| vpn_routes[ii].add_vpp_config() |
| |
| pkts.append(Ether(dst=self.pg2.local_mac, |
| src=self.pg2.remote_mac) / |
| IP(src=self.pg2.remote_ip4, dst=dst) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| # |
| # Send the packet stream (one pkt to each VPN route) |
| # - expect a 50-50 split of the traffic |
| # |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0._get_capture(1) |
| rx1 = self.pg1._get_capture(1) |
| |
| # not testig the LB hashing algorithm so we're not concerned |
| # with the split ratio, just as long as neither is 0 |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (psot-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # Withdraw one of the IGP routes |
| # |
| core_10_0_0_46.remove_vpp_config() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.vapi.ppcli("clear trace") |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0.get_capture(len(pkts)) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| |
| # |
| # packets should still be forwarded through the remaining peer |
| # |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0.get_capture(64) |
| |
| # |
| # Add the IGP route back and we return to load-balancing |
| # |
| core_10_0_0_46.add_vpp_config() |
| |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0._get_capture(1) |
| rx1 = self.pg1._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| def test_mpls_ebgp_pic(self): |
| """ MPLS eBGP PIC edge convergence |
| |
| 1) setup many eBGP VPN routes via a pair of eBGP peers |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw one eBGP path - expect LB across remaining eBGP |
| """ |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| vpn_bindings = [] |
| pkts = [] |
| for ii in range(64): |
| dst = "192.168.1.%d" % ii |
| local_label = 1600 + ii |
| vpn_routes.append(VppIpRoute(self, dst, 32, |
| [VppRoutePath(self.pg2.remote_ip4, |
| 0xffffffff, |
| nh_table_id=1, |
| is_resolve_attached=1), |
| VppRoutePath(self.pg3.remote_ip4, |
| 0xffffffff, |
| nh_table_id=1, |
| is_resolve_attached=1)], |
| table_id=1)) |
| vpn_routes[ii].add_vpp_config() |
| |
| vpn_bindings.append(VppMplsIpBind(self, local_label, dst, 32, |
| ip_table_id=1)) |
| vpn_bindings[ii].add_vpp_config() |
| |
| pkts.append(Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| MPLS(label=local_label, ttl=64) / |
| IP(src=self.pg0.remote_ip4, dst=dst) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (psot-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # withdraw the connected prefix on the interface. |
| # |
| self.pg2.unconfig_ip4() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # put the connecteds back |
| # |
| self.pg2.config_ip4() |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| def test_mpls_v6_ebgp_pic(self): |
| """ MPLSv6 eBGP PIC edge convergence |
| |
| 1) setup many eBGP VPNv6 routes via a pair of eBGP peers |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw one eBGP path - expect LB across remaining eBGP |
| """ |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| vpn_bindings = [] |
| pkts = [] |
| for ii in range(64): |
| dst = "3000::%d" % ii |
| local_label = 1600 + ii |
| vpn_routes.append(VppIpRoute(self, dst, 128, |
| [VppRoutePath(self.pg2.remote_ip6, |
| 0xffffffff, |
| nh_table_id=1, |
| is_resolve_attached=1, |
| is_ip6=1), |
| VppRoutePath(self.pg3.remote_ip6, |
| 0xffffffff, |
| nh_table_id=1, |
| is_ip6=1, |
| is_resolve_attached=1)], |
| table_id=1, |
| is_ip6=1)) |
| vpn_routes[ii].add_vpp_config() |
| |
| vpn_bindings.append(VppMplsIpBind(self, local_label, dst, 128, |
| ip_table_id=1, |
| is_ip6=1)) |
| vpn_bindings[ii].add_vpp_config() |
| |
| pkts.append(Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| MPLS(label=local_label, ttl=64) / |
| IPv6(src=self.pg0.remote_ip6, dst=dst) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (psot-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # withdraw the connected prefix on the interface. |
| # and shutdown the interface so the ND cache is flushed. |
| # |
| self.pg2.unconfig_ip6() |
| self.pg2.admin_down() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # put the connecteds back |
| # |
| self.pg2.admin_up() |
| self.pg2.config_ip6() |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |