| #!/usr/bin/env python |
| |
| import unittest |
| |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether, Dot1Q, GRE, ERSPAN |
| from scapy.layers.inet import IP, UDP |
| from scapy.layers.vxlan import VXLAN |
| |
| from framework import VppTestCase, VppTestRunner |
| from util import Host, ppp |
| from vpp_sub_interface import VppDot1QSubint, VppDot1ADSubint |
| from vpp_gre_interface import VppGreInterface, VppGre6Interface |
| from vpp_papi_provider import L2_VTR_OP |
| from collections import namedtuple |
| |
| Tag = namedtuple('Tag', ['dot1', 'vlan']) |
| DOT1AD = 0x88A8 |
| DOT1Q = 0x8100 |
| |
| |
| class TestSpan(VppTestCase): |
| """ SPAN Test Case """ |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestSpan, cls).setUpClass() |
| # Test variables |
| cls.pkts_per_burst = 257 # Number of packets per burst |
| # create 3 pg interfaces |
| cls.create_pg_interfaces(range(3)) |
| |
| cls.bd_id = 55 |
| cls.sub_if = VppDot1QSubint(cls, cls.pg0, 100) |
| cls.vlan_sub_if = VppDot1QSubint(cls, cls.pg2, 300) |
| cls.vlan_sub_if.set_vtr(L2_VTR_OP.L2_POP_1, tag=300) |
| |
| cls.qinq_sub_if = VppDot1ADSubint(cls, cls.pg2, 33, 400, 500) |
| cls.qinq_sub_if.set_vtr(L2_VTR_OP.L2_POP_2, outer=500, inner=400) |
| |
| # packet flows mapping pg0 -> pg1, pg2 -> pg3, etc. |
| cls.flows = dict() |
| cls.flows[cls.pg0] = [cls.pg1] |
| cls.flows[cls.pg1] = [cls.pg0] |
| |
| # packet sizes |
| cls.pg_if_packet_sizes = [64, 512, 1518] # , 9018] |
| |
| # setup all interfaces |
| for i in cls.pg_interfaces: |
| i.admin_up() |
| i.config_ip4() |
| i.resolve_arp() |
| |
| cls.vxlan = cls.vapi.vxlan_add_del_tunnel( |
| src_address=cls.pg2.local_ip4n, dst_address=cls.pg2.remote_ip4n, |
| is_add=1, vni=1111) |
| |
| def setUp(self): |
| super(TestSpan, self).setUp() |
| self.reset_packet_infos() |
| |
| def tearDown(self): |
| super(TestSpan, self).tearDown() |
| if not self.vpp_dead: |
| self.logger.info(self.vapi.ppcli("show interface span")) |
| |
| def xconnect(self, a, b, is_add=1): |
| self.vapi.sw_interface_set_l2_xconnect(a, b, enable=is_add) |
| self.vapi.sw_interface_set_l2_xconnect(b, a, enable=is_add) |
| |
| def bridge(self, sw_if_index, is_add=1): |
| self.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=sw_if_index, |
| bd_id=self.bd_id, enable=is_add) |
| |
| def _remove_tag(self, packet, vlan, tag_type): |
| self.assertEqual(packet.type, tag_type) |
| payload = packet.payload |
| self.assertEqual(payload.vlan, vlan) |
| inner_type = payload.type |
| payload = payload.payload |
| packet.remove_payload() |
| packet.add_payload(payload) |
| packet.type = inner_type |
| |
| def remove_tags(self, packet, tags): |
| for t in tags: |
| self._remove_tag(packet, t.vlan, t.dot1) |
| return packet |
| |
| def decap_gre(self, pkt): |
| """ |
| Decapsulate the original payload frame by removing GRE header |
| """ |
| self.assertEqual(pkt[Ether].src, self.pg2.local_mac) |
| self.assertEqual(pkt[Ether].dst, self.pg2.remote_mac) |
| |
| self.assertEqual(pkt[IP].src, self.pg2.local_ip4) |
| self.assertEqual(pkt[IP].dst, self.pg2.remote_ip4) |
| |
| return pkt[GRE].payload |
| |
| def decap_erspan(self, pkt, session): |
| """ |
| Decapsulate the original payload frame by removing ERSPAN header |
| """ |
| self.assertEqual(pkt[Ether].src, self.pg2.local_mac) |
| self.assertEqual(pkt[Ether].dst, self.pg2.remote_mac) |
| |
| self.assertEqual(pkt[IP].src, self.pg2.local_ip4) |
| self.assertEqual(pkt[IP].dst, self.pg2.remote_ip4) |
| |
| self.assertEqual(pkt[ERSPAN].ver, 1) |
| self.assertEqual(pkt[ERSPAN].vlan, 0) |
| self.assertEqual(pkt[ERSPAN].cos, 0) |
| self.assertEqual(pkt[ERSPAN].en, 3) |
| self.assertEqual(pkt[ERSPAN].t, 0) |
| self.assertEqual(pkt[ERSPAN].session_id, session) |
| self.assertEqual(pkt[ERSPAN].reserved, 0) |
| self.assertEqual(pkt[ERSPAN].index, 0) |
| |
| return pkt[ERSPAN].payload |
| |
| def decap_vxlan(self, pkt): |
| """ |
| Decapsulate the original payload frame by removing VXLAN header |
| """ |
| self.assertEqual(pkt[Ether].src, self.pg2.local_mac) |
| self.assertEqual(pkt[Ether].dst, self.pg2.remote_mac) |
| |
| self.assertEqual(pkt[IP].src, self.pg2.local_ip4) |
| self.assertEqual(pkt[IP].dst, self.pg2.remote_ip4) |
| |
| return pkt[VXLAN].payload |
| |
| def create_stream(self, src_if, packet_sizes, do_dot1=False, bcast=False): |
| pkts = [] |
| dst_if = self.flows[src_if][0] |
| dst_mac = src_if.remote_mac |
| if bcast: |
| dst_mac = "ff:ff:ff:ff:ff:ff" |
| |
| for i in range(0, self.pkts_per_burst): |
| payload = "span test" |
| size = packet_sizes[(i / 2) % len(packet_sizes)] |
| p = (Ether(src=src_if.local_mac, dst=dst_mac) / |
| IP(src=src_if.remote_ip4, dst=dst_if.remote_ip4) / |
| UDP(sport=10000 + src_if.sw_if_index * 1000 + i, dport=1234) / |
| Raw(payload)) |
| if do_dot1: |
| p = self.sub_if.add_dot1_layer(p) |
| self.extend_packet(p, size) |
| pkts.append(p) |
| return pkts |
| |
| def verify_capture(self, cap1, cap2): |
| self.assertEqual(len(cap1), len(cap2), |
| "Different number of sent and mirrored packets :" |
| "%u != %u" % (len(cap1), len(cap2))) |
| |
| pkts1 = [(pkt[Ether] / pkt[IP] / pkt[UDP]) for pkt in cap1] |
| pkts2 = [(pkt[Ether] / pkt[IP] / pkt[UDP]) for pkt in cap2] |
| |
| self.assertEqual(pkts1.sort(), pkts2.sort()) |
| |
| def test_device_span(self): |
| """ SPAN device rx mirror """ |
| |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.xconnect(self.pg0.sw_if_index, self.pg1.sw_if_index) |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream(self.pg0, self.pg_if_packet_sizes) |
| self.pg0.add_stream(pkts) |
| |
| # Enable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.pg0.sw_if_index, self.pg2.sw_if_index) |
| |
| self.logger.info(self.vapi.ppcli("show interface span")) |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| n_pkts = len(pkts) |
| pg1_pkts = self.pg1.get_capture(n_pkts) |
| pg2_pkts = self.pg2.get_capture(n_pkts) |
| |
| # Disable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.pg0.sw_if_index, self.pg2.sw_if_index, state=0) |
| self.xconnect(self.pg0.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg1_pkts, pg2_pkts) |
| |
| def test_span_l2_rx(self): |
| """ SPAN l2 rx mirror """ |
| |
| self.sub_if.admin_up() |
| |
| self.bridge(self.pg2.sw_if_index) |
| # Create bi-directional cross-connects between pg0 subif and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index) |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pkts) |
| |
| # Enable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.pg2.sw_if_index, is_l2=1) |
| |
| self.logger.info(self.vapi.ppcli("show interface span")) |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| pg2_expected = len(pkts) |
| pg1_pkts = self.pg1.get_capture(pg2_expected) |
| pg2_pkts = self.pg2.get_capture(pg2_expected) |
| self.bridge(self.pg2.sw_if_index, is_add=0) |
| |
| # Disable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.pg2.sw_if_index, state=0, is_l2=1) |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg1_pkts, pg2_pkts) |
| |
| def test_span_l2_rx_dst_vxlan(self): |
| """ SPAN l2 rx mirror into vxlan """ |
| |
| self.sub_if.admin_up() |
| self.vapi.sw_interface_set_flags(self.vxlan.sw_if_index, |
| flags=1) |
| |
| self.bridge(self.vxlan.sw_if_index, is_add=1) |
| # Create bi-directional cross-connects between pg0 subif and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index) |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pkts) |
| |
| # Enable SPAN on pg0 sub if (mirrored to vxlan) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.vxlan.sw_if_index, is_l2=1) |
| |
| self.logger.info(self.vapi.ppcli("show interface span")) |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| n_pkts = len(pkts) |
| pg1_pkts = self.pg1.get_capture(n_pkts) |
| pg2_pkts = [self.decap_vxlan(p) for p in self.pg2.get_capture(n_pkts)] |
| |
| self.bridge(self.vxlan.sw_if_index, is_add=0) |
| # Disable SPAN on pg0 sub if (mirrored to vxlan) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.vxlan.sw_if_index, state=0, is_l2=1) |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| self.verify_capture(pg1_pkts, pg2_pkts) |
| |
| def test_span_l2_rx_dst_gre_erspan(self): |
| """ SPAN l2 rx mirror into gre-erspan """ |
| |
| self.sub_if.admin_up() |
| |
| gre_if = VppGreInterface(self, self.pg2.local_ip4, |
| self.pg2.remote_ip4, |
| type=2, |
| session=543) |
| |
| gre_if.add_vpp_config() |
| gre_if.admin_up() |
| |
| self.bridge(gre_if.sw_if_index) |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=1) |
| |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pkts) |
| |
| # Enable SPAN on pg0 sub if (mirrored to gre-erspan) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, gre_if.sw_if_index, is_l2=1) |
| |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| n_pkts = len(pkts) |
| pg1_pkts = self.pg1.get_capture(n_pkts) |
| pg2_pkts = self.pg2.get_capture(n_pkts) |
| |
| def decap(p): return self.decap_erspan(p, session=543) |
| pg2_decaped = [decap(p) for p in pg2_pkts] |
| |
| self.bridge(gre_if.sw_if_index, is_add=0) |
| |
| # Disable SPAN on pg0 sub if |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, gre_if.sw_if_index, state=0, is_l2=1) |
| gre_if.remove_vpp_config() |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg1_pkts, pg2_decaped) |
| |
| def test_span_l2_rx_dst_gre_subif_vtr(self): |
| """ SPAN l2 rx mirror into gre-subif+vtr """ |
| |
| self.sub_if.admin_up() |
| |
| gre_if = VppGreInterface(self, self.pg2.local_ip4, |
| self.pg2.remote_ip4, |
| type=1) |
| |
| gre_if.add_vpp_config() |
| gre_if.admin_up() |
| |
| gre_sub_if = VppDot1QSubint(self, gre_if, 500) |
| gre_sub_if.set_vtr(L2_VTR_OP.L2_POP_1, tag=500) |
| gre_sub_if.admin_up() |
| |
| self.bridge(gre_sub_if.sw_if_index) |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=1) |
| |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pkts) |
| |
| # Enable SPAN on pg0 sub if (mirrored to gre sub if) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, gre_sub_if.sw_if_index, is_l2=1) |
| |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| n_pkts = len(pkts) |
| pg1_pkts = self.pg1.get_capture(n_pkts) |
| pg2_pkts = self.pg2.get_capture(n_pkts) |
| |
| def decap(p): return self.remove_tags( |
| self.decap_gre(p), [Tag(dot1=DOT1Q, vlan=500)]) |
| pg2_decaped = [decap(p) for p in pg2_pkts] |
| |
| self.bridge(gre_sub_if.sw_if_index, is_add=0) |
| |
| # Disable SPAN on pg0 sub if |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, gre_sub_if.sw_if_index, state=0, is_l2=1) |
| gre_if.remove_vpp_config() |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg1_pkts, pg2_decaped) |
| |
| def test_span_l2_rx_dst_1q_vtr(self): |
| """ SPAN l2 rx mirror into 1q subif+vtr """ |
| |
| self.sub_if.admin_up() |
| self.vlan_sub_if.admin_up() |
| |
| self.bridge(self.vlan_sub_if.sw_if_index) |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=1) |
| |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pkts) |
| |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.vlan_sub_if.sw_if_index, is_l2=1) |
| |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| n_pkts = len(pkts) |
| pg1_pkts = self.pg1.get_capture(n_pkts) |
| pg2_pkts = self.pg2.get_capture(n_pkts) |
| pg2_untagged = [self.remove_tags(p, [Tag(dot1=DOT1Q, vlan=300)]) |
| for p in pg2_pkts] |
| |
| self.bridge(self.vlan_sub_if.sw_if_index, is_add=0) |
| # Disable SPAN on pg0 sub if (mirrored to vxlan) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.vlan_sub_if.sw_if_index, state=0, |
| is_l2=1) |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg1_pkts, pg2_untagged) |
| |
| def test_span_l2_rx_dst_1ad_vtr(self): |
| """ SPAN l2 rx mirror into 1ad subif+vtr """ |
| |
| self.sub_if.admin_up() |
| self.qinq_sub_if.admin_up() |
| |
| self.bridge(self.qinq_sub_if.sw_if_index) |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=1) |
| |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pkts) |
| |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.qinq_sub_if.sw_if_index, is_l2=1) |
| |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| n_pkts = len(pkts) |
| pg1_pkts = self.pg1.get_capture(n_pkts) |
| pg2_pkts = self.pg2.get_capture(n_pkts) |
| pg2_untagged = [self.remove_tags(p, [Tag(dot1=DOT1AD, vlan=400), |
| Tag(dot1=DOT1Q, vlan=500)]) |
| for p in pg2_pkts] |
| |
| self.bridge(self.qinq_sub_if.sw_if_index, is_add=0) |
| # Disable SPAN on pg0 sub if (mirrored to vxlan) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.qinq_sub_if.sw_if_index, state=0, |
| is_l2=1) |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg1_pkts, pg2_untagged) |
| |
| def test_l2_tx_span(self): |
| """ SPAN l2 tx mirror """ |
| |
| self.sub_if.admin_up() |
| self.bridge(self.pg2.sw_if_index) |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index) |
| # Create incoming packet streams for packet-generator interfaces |
| pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pkts) |
| |
| # Enable SPAN on pg1 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.pg1.sw_if_index, self.pg2.sw_if_index, is_l2=1, state=2) |
| |
| self.logger.info(self.vapi.ppcli("show interface span")) |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| n_pkts = len(pkts) |
| pg1_pkts = self.pg1.get_capture(n_pkts) |
| pg2_pkts = self.pg2.get_capture(n_pkts) |
| self.bridge(self.pg2.sw_if_index, is_add=0) |
| # Disable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.pg1.sw_if_index, self.pg2.sw_if_index, state=0, is_l2=1) |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg1_pkts, pg2_pkts) |
| |
| def test_l2_rx_tx_span(self): |
| """ SPAN l2 rx tx mirror """ |
| |
| self.sub_if.admin_up() |
| self.bridge(self.pg2.sw_if_index) |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index) |
| |
| # Create incoming packet streams for packet-generator interfaces |
| pg0_pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True) |
| self.pg0.add_stream(pg0_pkts) |
| pg1_pkts = self.create_stream( |
| self.pg1, self.pg_if_packet_sizes, do_dot1=False) |
| self.pg1.add_stream(pg1_pkts) |
| |
| # Enable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.pg2.sw_if_index, is_l2=1, state=3) |
| self.logger.info(self.vapi.ppcli("show interface span")) |
| |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| pg0_expected = len(pg1_pkts) |
| pg1_expected = len(pg0_pkts) |
| pg2_expected = pg0_expected + pg1_expected |
| |
| pg0_pkts = self.pg0.get_capture(pg0_expected) |
| pg1_pkts = self.pg1.get_capture(pg1_expected) |
| pg2_pkts = self.pg2.get_capture(pg2_expected) |
| |
| self.bridge(self.pg2.sw_if_index, is_add=0) |
| # Disable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.pg2.sw_if_index, state=0, is_l2=1) |
| self.xconnect(self.sub_if.sw_if_index, self.pg1.sw_if_index, is_add=0) |
| |
| self.verify_capture(pg0_pkts + pg1_pkts, pg2_pkts) |
| |
| def test_l2_bcast_mirror(self): |
| """ SPAN l2 broadcast mirror """ |
| |
| self.sub_if.admin_up() |
| self.bridge(self.pg2.sw_if_index) |
| |
| # Create bi-directional cross-connects between pg0 and pg1 |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.sub_if.sw_if_index, bd_id=99, enable=1) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.pg1.sw_if_index, bd_id=99, enable=1) |
| |
| # Create incoming packet streams for packet-generator interfaces |
| pg0_pkts = self.create_stream( |
| self.pg0, self.pg_if_packet_sizes, do_dot1=True, bcast=True) |
| self.pg0.add_stream(pg0_pkts) |
| pg1_pkts = self.create_stream( |
| self.pg1, self.pg_if_packet_sizes, do_dot1=False, bcast=True) |
| self.pg1.add_stream(pg1_pkts) |
| |
| # Enable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.pg2.sw_if_index, is_l2=1, state=3) |
| self.logger.info(self.vapi.ppcli("show interface span")) |
| |
| # Enable packet capturing and start packet sending |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # Verify packets outgoing packet streams on mirrored interface (pg2) |
| pg0_expected = len(pg1_pkts) |
| pg1_expected = len(pg0_pkts) |
| pg2_expected = pg0_expected + pg1_expected |
| |
| pg0_pkts = self.pg0.get_capture(pg0_expected) |
| pg1_pkts = self.pg1.get_capture(pg1_expected) |
| pg2_pkts = self.pg2.get_capture(pg2_expected) |
| |
| self.bridge(self.pg2.sw_if_index, is_add=0) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.sub_if.sw_if_index, bd_id=99, enable=0) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.pg1.sw_if_index, bd_id=99, enable=0) |
| # Disable SPAN on pg0 (mirrored to pg2) |
| self.vapi.sw_interface_span_enable_disable( |
| self.sub_if.sw_if_index, self.pg2.sw_if_index, state=0, is_l2=1) |
| |
| self.verify_capture(pg0_pkts + pg1_pkts, pg2_pkts) |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |