| #!/usr/bin/env python |
| |
| import unittest |
| |
| from framework import VppTestCase, VppTestRunner |
| from vpp_ip import DpoProto |
| from vpp_ip_route import VppIpRoute, VppRoutePath |
| |
| import scapy.compat |
| from scapy.layers.l2 import Ether, Raw |
| from scapy.layers.inet import IP, UDP, ICMP, TCP, fragment |
| from scapy.layers.inet6 import IPv6, ICMPv6TimeExceeded |
| |
| |
| class TestMAP(VppTestCase): |
| """ MAP Test Case """ |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMAP, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMAP, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMAP, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| # pg0 is 'inside' IPv4 |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| |
| # pg1 is 'outside' IPv6 |
| self.pg1.admin_up() |
| self.pg1.config_ip6() |
| self.pg1.generate_remote_hosts(4) |
| self.pg1.configure_ipv6_neighbors() |
| |
| def tearDown(self): |
| super(TestMAP, self).tearDown() |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.admin_down() |
| |
| def send_and_assert_encapped(self, tx, ip6_src, ip6_dst, dmac=None): |
| if not dmac: |
| dmac = self.pg1.remote_mac |
| |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(1) |
| rx = rx[0] |
| |
| self.assertEqual(rx[Ether].dst, dmac) |
| self.assertEqual(rx[IP].src, tx[IP].src) |
| self.assertEqual(rx[IPv6].src, ip6_src) |
| self.assertEqual(rx[IPv6].dst, ip6_dst) |
| |
| def test_map_e(self): |
| """ MAP-E """ |
| |
| # |
| # Add a route to the MAP-BR |
| # |
| map_br_pfx = "2001::" |
| map_br_pfx_len = 64 |
| map_route = VppIpRoute(self, |
| map_br_pfx, |
| map_br_pfx_len, |
| [VppRoutePath(self.pg1.remote_ip6, |
| self.pg1.sw_if_index, |
| proto=DpoProto.DPO_PROTO_IP6)], |
| is_ip6=1) |
| map_route.add_vpp_config() |
| |
| # |
| # Add a domain that maps from pg0 to pg1 |
| # |
| map_dst = '2001::/64' |
| map_src = '3000::1/128' |
| client_pfx = '192.168.0.0/16' |
| self.vapi.map_add_domain(map_dst, client_pfx, map_src) |
| |
| # Enable MAP on interface. |
| self.vapi.map_if_enable_disable(is_enable=1, |
| sw_if_index=self.pg0.sw_if_index, |
| is_translation=0) |
| |
| # Ensure MAP doesn't steal all packets! |
| v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src=self.pg0.remote_ip4, dst=self.pg0.remote_ip4) / |
| UDP(sport=20000, dport=10000) / |
| Raw('\xa5' * 100)) |
| rx = self.send_and_expect(self.pg0, v4*1, self.pg0) |
| v4_reply = v4[1] |
| v4_reply.ttl -= 1 |
| for p in rx: |
| self.validate(p[1], v4_reply) |
| |
| # |
| # Fire in a v4 packet that will be encapped to the BR |
| # |
| v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src=self.pg0.remote_ip4, dst='192.168.1.1') / |
| UDP(sport=20000, dport=10000) / |
| Raw('\xa5' * 100)) |
| |
| self.send_and_assert_encapped(v4, "3000::1", "2001::c0a8:0:0") |
| |
| # Enable MAP on interface. |
| self.vapi.map_if_enable_disable(is_enable=1, |
| sw_if_index=self.pg1.sw_if_index, |
| is_translation=0) |
| |
| # Ensure MAP doesn't steal all packets |
| v6 = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IPv6(src=self.pg1.remote_ip6, dst=self.pg1.remote_ip6) / |
| UDP(sport=20000, dport=10000) / |
| Raw('\xa5' * 100)) |
| rx = self.send_and_expect(self.pg1, v6*1, self.pg1) |
| v6_reply = v6[1] |
| v6_reply.hlim -= 1 |
| for p in rx: |
| self.validate(p[1], v6_reply) |
| |
| # |
| # Fire in a V6 encapped packet. |
| # expect a decapped packet on the inside ip4 link |
| # |
| p = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IPv6(dst='3000::1', src="2001::1") / |
| IP(dst=self.pg0.remote_ip4, src='192.168.1.1') / |
| UDP(sport=20000, dport=10000) / |
| Raw('\xa5' * 100)) |
| |
| self.pg1.add_stream(p) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture(1) |
| rx = rx[0] |
| |
| self.assertFalse(rx.haslayer(IPv6)) |
| self.assertEqual(rx[IP].src, p[IP].src) |
| self.assertEqual(rx[IP].dst, p[IP].dst) |
| |
| # |
| # Pre-resolve. No API for this!! |
| # |
| self.vapi.ppcli("map params pre-resolve ip6-nh 4001::1") |
| |
| self.send_and_assert_no_replies(self.pg0, v4, |
| "resolved via default route") |
| |
| # |
| # Add a route to 4001::1. Expect the encapped traffic to be |
| # sent via that routes next-hop |
| # |
| pre_res_route = VppIpRoute( |
| self, "4001::1", 128, |
| [VppRoutePath(self.pg1.remote_hosts[2].ip6, |
| self.pg1.sw_if_index, |
| proto=DpoProto.DPO_PROTO_IP6)], |
| is_ip6=1) |
| pre_res_route.add_vpp_config() |
| |
| self.send_and_assert_encapped(v4, "3000::1", |
| "2001::c0a8:0:0", |
| dmac=self.pg1.remote_hosts[2].mac) |
| |
| # |
| # change the route to the pre-solved next-hop |
| # |
| pre_res_route.modify([VppRoutePath(self.pg1.remote_hosts[3].ip6, |
| self.pg1.sw_if_index, |
| proto=DpoProto.DPO_PROTO_IP6)]) |
| pre_res_route.add_vpp_config() |
| |
| self.send_and_assert_encapped(v4, "3000::1", |
| "2001::c0a8:0:0", |
| dmac=self.pg1.remote_hosts[3].mac) |
| |
| # |
| # cleanup. The test infra's object registry will ensure |
| # the route is really gone and thus that the unresolve worked. |
| # |
| pre_res_route.remove_vpp_config() |
| self.vapi.ppcli("map params pre-resolve del ip6-nh 4001::1") |
| |
| def validate(self, rx, expected): |
| self.assertEqual(rx, expected.__class__(scapy.compat.raw(expected))) |
| |
| def payload(self, len): |
| return 'x' * len |
| |
| def test_map_t(self): |
| """ MAP-T """ |
| |
| # |
| # Add a domain that maps from pg0 to pg1 |
| # |
| map_dst = '2001:db8::/32' |
| map_src = '1234:5678:90ab:cdef::/64' |
| ip4_pfx = '192.168.0.0/24' |
| |
| self.vapi.map_add_domain(map_dst, ip4_pfx, map_src, |
| 16, 6, 4, mtu=1500) |
| |
| # Enable MAP-T on interfaces. |
| self.vapi.map_if_enable_disable(is_enable=1, |
| sw_if_index=self.pg0.sw_if_index, |
| is_translation=1) |
| self.vapi.map_if_enable_disable(is_enable=1, |
| sw_if_index=self.pg1.sw_if_index, |
| is_translation=1) |
| |
| # Ensure MAP doesn't steal all packets! |
| v4 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src=self.pg0.remote_ip4, dst=self.pg0.remote_ip4) / |
| UDP(sport=20000, dport=10000) / |
| Raw('\xa5' * 100)) |
| rx = self.send_and_expect(self.pg0, v4*1, self.pg0) |
| v4_reply = v4[1] |
| v4_reply.ttl -= 1 |
| for p in rx: |
| self.validate(p[1], v4_reply) |
| # Ensure MAP doesn't steal all packets |
| v6 = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IPv6(src=self.pg1.remote_ip6, dst=self.pg1.remote_ip6) / |
| UDP(sport=20000, dport=10000) / |
| Raw('\xa5' * 100)) |
| rx = self.send_and_expect(self.pg1, v6*1, self.pg1) |
| v6_reply = v6[1] |
| v6_reply.hlim -= 1 |
| for p in rx: |
| self.validate(p[1], v6_reply) |
| |
| map_route = VppIpRoute(self, |
| "2001:db8::", |
| 32, |
| [VppRoutePath(self.pg1.remote_ip6, |
| self.pg1.sw_if_index, |
| proto=DpoProto.DPO_PROTO_IP6)], |
| is_ip6=1) |
| map_route.add_vpp_config() |
| |
| # |
| # Send a v4 packet that will be translated |
| # |
| p_ether = Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) |
| p_ip4 = IP(src=self.pg0.remote_ip4, dst='192.168.0.1') |
| payload = TCP(sport=0xabcd, dport=0xabcd) |
| |
| p4 = (p_ether / p_ip4 / payload) |
| p6_translated = (IPv6(src="1234:5678:90ab:cdef:ac:1001:200:0", |
| dst="2001:db8:1f0::c0a8:1:f") / payload) |
| p6_translated.hlim -= 1 |
| rx = self.send_and_expect(self.pg0, p4*1, self.pg1) |
| for p in rx: |
| self.validate(p[1], p6_translated) |
| |
| # Send back an IPv6 packet that will be "untranslated" |
| p_ether6 = Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) |
| p_ip6 = IPv6(src='2001:db8:1f0::c0a8:1:f', |
| dst='1234:5678:90ab:cdef:ac:1001:200:0') |
| p6 = (p_ether6 / p_ip6 / payload) |
| p4_translated = (IP(src='192.168.0.1', |
| dst=self.pg0.remote_ip4) / payload) |
| p4_translated.id = 0 |
| p4_translated.ttl -= 1 |
| rx = self.send_and_expect(self.pg1, p6*1, self.pg0) |
| for p in rx: |
| self.validate(p[1], p4_translated) |
| |
| # IPv4 TTL |
| ip4_ttl_expired = IP(src=self.pg0.remote_ip4, dst='192.168.0.1', ttl=0) |
| p4 = (p_ether / ip4_ttl_expired / payload) |
| |
| icmp4_reply = (IP(id=0, ttl=254, src=self.pg0.local_ip4, |
| dst=self.pg0.remote_ip4) / |
| ICMP(type='time-exceeded', |
| code='ttl-zero-during-transit') / |
| IP(src=self.pg0.remote_ip4, |
| dst='192.168.0.1', ttl=0) / payload) |
| rx = self.send_and_expect(self.pg0, p4*1, self.pg0) |
| for p in rx: |
| self.validate(p[1], icmp4_reply) |
| |
| ''' |
| This one is broken, cause it would require hairpinning... |
| # IPv4 TTL TTL1 |
| ip4_ttl_expired = IP(src=self.pg0.remote_ip4, dst='192.168.0.1', ttl=1) |
| p4 = (p_ether / ip4_ttl_expired / payload) |
| |
| icmp4_reply = IP(id=0, ttl=254, src=self.pg0.local_ip4, |
| dst=self.pg0.remote_ip4) / \ |
| ICMP(type='time-exceeded', code='ttl-zero-during-transit' ) / \ |
| IP(src=self.pg0.remote_ip4, dst='192.168.0.1', ttl=0) / payload |
| rx = self.send_and_expect(self.pg0, p4*1, self.pg0) |
| for p in rx: |
| self.validate(p[1], icmp4_reply) |
| ''' |
| |
| # IPv6 Hop limit |
| ip6_hlim_expired = IPv6(hlim=0, src='2001:db8:1ab::c0a8:1:ab', |
| dst='1234:5678:90ab:cdef:ac:1001:200:0') |
| p6 = (p_ether6 / ip6_hlim_expired / payload) |
| |
| icmp6_reply = (IPv6(hlim=255, src=self.pg1.local_ip6, |
| dst="2001:db8:1ab::c0a8:1:ab") / |
| ICMPv6TimeExceeded(code=0) / |
| IPv6(src="2001:db8:1ab::c0a8:1:ab", |
| dst='1234:5678:90ab:cdef:ac:1001:200:0', |
| hlim=0) / payload) |
| rx = self.send_and_expect(self.pg1, p6*1, self.pg1) |
| for p in rx: |
| self.validate(p[1], icmp6_reply) |
| |
| # IPv4 Well-known port |
| p_ip4 = IP(src=self.pg0.remote_ip4, dst='192.168.0.1') |
| payload = UDP(sport=200, dport=200) |
| p4 = (p_ether / p_ip4 / payload) |
| self.send_and_assert_no_replies(self.pg0, p4*1) |
| |
| # IPv6 Well-known port |
| payload = UDP(sport=200, dport=200) |
| p6 = (p_ether6 / p_ip6 / payload) |
| self.send_and_assert_no_replies(self.pg1, p6*1) |
| |
| # Packet fragmentation |
| payload = UDP(sport=40000, dport=4000) / self.payload(1453) |
| p4 = (p_ether / p_ip4 / payload) |
| self.pg_enable_capture() |
| self.pg0.add_stream(p4) |
| self.pg_start() |
| rx = self.pg1.get_capture(2) |
| for p in rx: |
| pass |
| # TODO: Manual validation |
| # self.validate(p[1], icmp4_reply) |
| |
| # Packet fragmentation send fragments |
| payload = UDP(sport=40000, dport=4000) / self.payload(1453) |
| p4 = (p_ether / p_ip4 / payload) |
| frags = fragment(p4, fragsize=1000) |
| self.pg_enable_capture() |
| self.pg0.add_stream(frags) |
| self.pg_start() |
| rx = self.pg1.get_capture(2) |
| for p in rx: |
| pass |
| # p.show2() |
| # reass_pkt = reassemble(rx) |
| # p4_reply.ttl -= 1 |
| # p4_reply.id = 256 |
| # self.validate(reass_pkt, p4_reply) |
| |
| # TCP MSS clamping |
| self.vapi.map_param_set_tcp(1300) |
| |
| # |
| # Send a v4 TCP SYN packet that will be translated and MSS clamped |
| # |
| p_ether = Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) |
| p_ip4 = IP(src=self.pg0.remote_ip4, dst='192.168.0.1') |
| payload = TCP(sport=0xabcd, dport=0xabcd, flags="S", |
| options=[('MSS', 1460)]) |
| |
| p4 = (p_ether / p_ip4 / payload) |
| p6_translated = (IPv6(src="1234:5678:90ab:cdef:ac:1001:200:0", |
| dst="2001:db8:1f0::c0a8:1:f") / payload) |
| p6_translated.hlim -= 1 |
| p6_translated[TCP].options = [('MSS', 1300)] |
| rx = self.send_and_expect(self.pg0, p4*1, self.pg1) |
| for p in rx: |
| self.validate(p[1], p6_translated) |
| |
| # Send back an IPv6 packet that will be "untranslated" |
| p_ether6 = Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) |
| p_ip6 = IPv6(src='2001:db8:1f0::c0a8:1:f', |
| dst='1234:5678:90ab:cdef:ac:1001:200:0') |
| p6 = (p_ether6 / p_ip6 / payload) |
| p4_translated = (IP(src='192.168.0.1', |
| dst=self.pg0.remote_ip4) / payload) |
| p4_translated.id = 0 |
| p4_translated.ttl -= 1 |
| p4_translated[TCP].options = [('MSS', 1300)] |
| rx = self.send_and_expect(self.pg1, p6*1, self.pg0) |
| for p in rx: |
| self.validate(p[1], p4_translated) |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |