| create host-interface name vpp |
| create host-interface name priv |
| pipe create |
| |
| set interface ip addr host-vpp 192.168.10.2/24 |
| set interface state host-vpp up |
| |
| ip table add 1 |
| set int ip table host-priv 1 |
| set int ip table pipe0.1 1 |
| |
| set interface ip addr host-priv 192.168.3.1/24 |
| set interface state host-priv up |
| |
| set int ip address pipe0.0 10.0.0.1/24 |
| set int ip address pipe0.1 10.0.0.2/24 |
| set int state pipe0 up |
| |
| ikev2 profile add pr1 |
| ikev2 profile set pr1 auth shared-key-mic string Vpp123 |
| ikev2 profile set pr1 id local fqdn vpp.home |
| ikev2 profile set pr1 id remote fqdn roadwarrior.vpn.example.com |
| ikev2 profile set pr1 traffic-selector local ip-range 192.168.3.0 - 192.168.3.255 port-range 0 - 65535 protocol 0 |
| ikev2 profile set pr1 traffic-selector remote ip-range 192.168.5.0 - 192.168.5.255 port-range 0 - 65535 protocol 0 |
| |
| ip route add table 1 192.168.10.0/24 via 10.0.0.1 pipe0.1 |
| |
| create ipip tunnel src 10.0.0.2 dst 192.168.10.1 outer-table-id 1 |
| set interface ip table ipip0 1 |
| |
| ikev2 profile set pr1 tunnel ipip0 |
| ip route add table 1 192.168.5.0/24 via ipip0 |
| set interface unnumbered ipip0 use pipe0.1 |
| |
| nat44 plugin enable |
| nat44 add address 192.168.10.2 |
| set interface nat44 in pipe0.0 out host-vpp |
| nat44 add static mapping udp local 10.0.0.2 500 external 192.168.10.2 500 |
| nat44 add static mapping udp local 10.0.0.2 4500 external 192.168.10.2 4500 |
| |
| event-logger clear |
| trace add af-packet-input 100 |
| ikev2 set liveness 10 2 |
| ikev2 set logging level 4 |