| #!/usr/bin/env python |
| |
| import unittest |
| import socket |
| |
| from framework import VppTestCase, VppTestRunner |
| from vpp_ip import DpoProto |
| from vpp_ip_route import VppIpRoute, VppRoutePath, VppMplsRoute, \ |
| VppMplsIpBind, VppIpMRoute, VppMRoutePath, \ |
| MRouteItfFlags, MRouteEntryFlags, VppIpTable, VppMplsTable, \ |
| VppMplsLabel, MplsLspMode, find_mpls_route |
| from vpp_mpls_tunnel_interface import VppMPLSTunnelInterface |
| |
| import scapy.compat |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether |
| from scapy.layers.inet import IP, UDP, ICMP |
| from scapy.layers.inet6 import IPv6, ICMPv6TimeExceeded |
| from scapy.contrib.mpls import MPLS |
| |
| |
| def verify_filter(capture, sent): |
| if not len(capture) == len(sent): |
| # filter out any IPv6 RAs from the capture |
| for p in capture: |
| if p.haslayer(IPv6): |
| capture.remove(p) |
| return capture |
| |
| |
| def verify_mpls_stack(tst, rx, mpls_labels): |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| tst.assertEqual(eth.type, 0x8847) |
| |
| rx_mpls = rx[MPLS] |
| |
| for ii in range(len(mpls_labels)): |
| tst.assertEqual(rx_mpls.label, mpls_labels[ii].value) |
| tst.assertEqual(rx_mpls.cos, mpls_labels[ii].exp) |
| tst.assertEqual(rx_mpls.ttl, mpls_labels[ii].ttl) |
| |
| if ii == len(mpls_labels) - 1: |
| tst.assertEqual(rx_mpls.s, 1) |
| else: |
| # not end of stack |
| tst.assertEqual(rx_mpls.s, 0) |
| # pop the label to expose the next |
| rx_mpls = rx_mpls[MPLS].payload |
| |
| |
| class TestMPLS(VppTestCase): |
| """ MPLS Test Case """ |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLS, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLS, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLS, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| # setup both interfaces |
| # assign them different tables. |
| table_id = 0 |
| self.tables = [] |
| |
| tbl = VppMplsTable(self, 0) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| for i in self.pg_interfaces: |
| i.admin_up() |
| |
| if table_id != 0: |
| tbl = VppIpTable(self, table_id) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| tbl = VppIpTable(self, table_id, is_ip6=1) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| i.set_table_ip4(table_id) |
| i.set_table_ip6(table_id) |
| i.config_ip4() |
| i.resolve_arp() |
| i.config_ip6() |
| i.resolve_ndp() |
| i.enable_mpls() |
| table_id += 1 |
| |
| def tearDown(self): |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.ip6_disable() |
| i.set_table_ip4(0) |
| i.set_table_ip6(0) |
| i.disable_mpls() |
| i.admin_down() |
| super(TestMPLS, self).tearDown() |
| |
| # the default of 64 matches the IP packet TTL default |
| def create_stream_labelled_ip4( |
| self, |
| src_if, |
| mpls_labels, |
| ping=0, |
| ip_itf=None, |
| dst_ip=None, |
| chksum=None, |
| ip_ttl=64, |
| n=257): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, n): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| |
| for ii in range(len(mpls_labels)): |
| p = p / MPLS(label=mpls_labels[ii].value, |
| ttl=mpls_labels[ii].ttl, |
| cos=mpls_labels[ii].exp) |
| if not ping: |
| if not dst_ip: |
| p = (p / IP(src=src_if.local_ip4, |
| dst=src_if.remote_ip4, |
| ttl=ip_ttl) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| else: |
| p = (p / IP(src=src_if.local_ip4, dst=dst_ip, ttl=ip_ttl) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| else: |
| p = (p / IP(src=ip_itf.remote_ip4, |
| dst=ip_itf.local_ip4, |
| ttl=ip_ttl) / |
| ICMP()) |
| |
| if chksum: |
| p[IP].chksum = chksum |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_ip4(self, src_if, dst_ip, ip_ttl=64, ip_dscp=0): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, 257): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| IP(src=src_if.remote_ip4, dst=dst_ip, |
| ttl=ip_ttl, tos=ip_dscp) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_ip6(self, src_if, dst_ip, ip_ttl=64, ip_dscp=0): |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, 257): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) / |
| IPv6(src=src_if.remote_ip6, dst=dst_ip, |
| hlim=ip_ttl, tc=ip_dscp) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def create_stream_labelled_ip6(self, src_if, mpls_labels, |
| hlim=64, dst_ip=None): |
| if dst_ip is None: |
| dst_ip = src_if.remote_ip6 |
| self.reset_packet_infos() |
| pkts = [] |
| for i in range(0, 257): |
| info = self.create_packet_info(src_if, src_if) |
| payload = self.info_to_payload(info) |
| p = Ether(dst=src_if.local_mac, src=src_if.remote_mac) |
| for l in mpls_labels: |
| p = p / MPLS(label=l.value, ttl=l.ttl, cos=l.exp) |
| |
| p = p / (IPv6(src=src_if.remote_ip6, dst=dst_ip, hlim=hlim) / |
| UDP(sport=1234, dport=1234) / |
| Raw(payload)) |
| info.data = p.copy() |
| pkts.append(p) |
| return pkts |
| |
| def verify_capture_ip4(self, src_if, capture, sent, ping_resp=0, |
| ip_ttl=None, ip_dscp=0): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x800) |
| |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| if not ping_resp: |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| self.assertEqual(rx_ip.tos, ip_dscp) |
| if not ip_ttl: |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| else: |
| self.assertEqual(rx_ip.ttl, ip_ttl) |
| else: |
| self.assertEqual(rx_ip.src, tx_ip.dst) |
| self.assertEqual(rx_ip.dst, tx_ip.src) |
| |
| except: |
| raise |
| |
| def verify_capture_labelled_ip4(self, src_if, capture, sent, |
| mpls_labels, ip_ttl=None): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| if not ip_ttl: |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| else: |
| self.assertEqual(rx_ip.ttl, ip_ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_labelled_ip6(self, src_if, capture, sent, |
| mpls_labels, ip_ttl=None): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IPv6] |
| rx_ip = rx[IPv6] |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| if not ip_ttl: |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim) |
| else: |
| self.assertEqual(rx_ip.hlim, ip_ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_tunneled_ip4(self, src_if, capture, sent, mpls_labels): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| tx_ip = tx[IP] |
| rx_ip = rx[IP] |
| |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| # IP processing post pop has decremented the TTL |
| self.assertEqual(rx_ip.ttl + 1, tx_ip.ttl) |
| |
| except: |
| raise |
| |
| def verify_capture_labelled(self, src_if, capture, sent, |
| mpls_labels): |
| try: |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| rx = capture[i] |
| verify_mpls_stack(self, rx, mpls_labels) |
| except: |
| raise |
| |
| def verify_capture_ip6(self, src_if, capture, sent, |
| ip_hlim=None, ip_dscp=0): |
| try: |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x86DD) |
| |
| tx_ip = tx[IPv6] |
| rx_ip = rx[IPv6] |
| |
| self.assertEqual(rx_ip.src, tx_ip.src) |
| self.assertEqual(rx_ip.dst, tx_ip.dst) |
| self.assertEqual(rx_ip.tc, ip_dscp) |
| # IP processing post pop has decremented the TTL |
| if not ip_hlim: |
| self.assertEqual(rx_ip.hlim + 1, tx_ip.hlim) |
| else: |
| self.assertEqual(rx_ip.hlim, ip_hlim) |
| |
| except: |
| raise |
| |
| def verify_capture_ip6_icmp(self, src_if, capture, sent): |
| try: |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the rx'd packet has the MPLS label popped |
| eth = rx[Ether] |
| self.assertEqual(eth.type, 0x86DD) |
| |
| tx_ip = tx[IPv6] |
| rx_ip = rx[IPv6] |
| |
| self.assertEqual(rx_ip.dst, tx_ip.src) |
| # ICMP sourced from the interface's address |
| self.assertEqual(rx_ip.src, src_if.local_ip6) |
| # hop-limit reset to 255 for IMCP packet |
| self.assertEqual(rx_ip.hlim, 255) |
| |
| icmp = rx[ICMPv6TimeExceeded] |
| |
| except: |
| raise |
| |
| def test_swap(self): |
| """ MPLS label swap tests """ |
| |
| # |
| # A simple MPLS xconnect - eos label in label out |
| # |
| route_32_eos = VppMplsRoute(self, 32, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(33)])]) |
| route_32_eos.add_vpp_config() |
| |
| self.assertTrue( |
| find_mpls_route(self, 0, 32, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(33)])])) |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(32, ttl=32, exp=1)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(33, ttl=31, exp=1)]) |
| |
| self.assertEqual(route_32_eos.get_stats_to()['packets'], 257) |
| |
| # |
| # A simple MPLS xconnect - non-eos label in label out |
| # |
| route_32_neos = VppMplsRoute(self, 32, 0, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(33)])]) |
| route_32_neos.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(32, ttl=21, exp=7), |
| VppMplsLabel(99)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(33, ttl=20, exp=7), |
| VppMplsLabel(99)]) |
| self.assertEqual(route_32_neos.get_stats_to()['packets'], 257) |
| |
| # |
| # A simple MPLS xconnect - non-eos label in label out, uniform mode |
| # |
| route_42_neos = VppMplsRoute( |
| self, 42, 0, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(43, MplsLspMode.UNIFORM)])]) |
| route_42_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(42, ttl=21, exp=7), |
| VppMplsLabel(99)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(43, ttl=20, exp=7), |
| VppMplsLabel(99)]) |
| |
| # |
| # An MPLS xconnect - EOS label in IP out |
| # |
| route_33_eos = VppMplsRoute(self, 33, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[])]) |
| route_33_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(33)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx) |
| |
| # |
| # disposed packets have an invalid IPv4 checksum |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(33)], |
| dst_ip=self.pg0.remote_ip4, |
| n=65, |
| chksum=1) |
| self.send_and_assert_no_replies(self.pg0, tx, "Invalid Checksum") |
| |
| # |
| # An MPLS xconnect - EOS label in IP out, uniform mode |
| # |
| route_3333_eos = VppMplsRoute( |
| self, 3333, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(3, MplsLspMode.UNIFORM)])]) |
| route_3333_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, |
| [VppMplsLabel(3333, ttl=55, exp=3)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx, ip_ttl=54, ip_dscp=0x60) |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, |
| [VppMplsLabel(3333, ttl=66, exp=4)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx, ip_ttl=65, ip_dscp=0x80) |
| |
| # |
| # An MPLS xconnect - EOS label in IPv6 out |
| # |
| route_333_eos = VppMplsRoute( |
| self, 333, 1, |
| [VppRoutePath(self.pg0.remote_ip6, |
| self.pg0.sw_if_index, |
| labels=[], |
| proto=DpoProto.DPO_PROTO_IP6)]) |
| route_333_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(333)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| # |
| # disposed packets have an TTL expired |
| # |
| tx = self.create_stream_labelled_ip6(self.pg0, |
| [VppMplsLabel(333, ttl=64)], |
| dst_ip=self.pg1.remote_ip6, |
| hlim=1) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6_icmp(self.pg0, rx, tx) |
| |
| # |
| # An MPLS xconnect - EOS label in IPv6 out w imp-null |
| # |
| route_334_eos = VppMplsRoute( |
| self, 334, 1, |
| [VppRoutePath(self.pg0.remote_ip6, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(3)], |
| proto=DpoProto.DPO_PROTO_IP6)]) |
| route_334_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip6(self.pg0, |
| [VppMplsLabel(334, ttl=64)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| # |
| # An MPLS xconnect - EOS label in IPv6 out w imp-null in uniform mode |
| # |
| route_335_eos = VppMplsRoute( |
| self, 335, 1, |
| [VppRoutePath(self.pg0.remote_ip6, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(3, MplsLspMode.UNIFORM)], |
| proto=DpoProto.DPO_PROTO_IP6)]) |
| route_335_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip6( |
| self.pg0, |
| [VppMplsLabel(335, ttl=27, exp=4)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx, ip_hlim=26, ip_dscp=0x80) |
| |
| # |
| # disposed packets have an TTL expired |
| # |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(334)], |
| dst_ip=self.pg1.remote_ip6, |
| hlim=0) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6_icmp(self.pg0, rx, tx) |
| |
| # |
| # An MPLS xconnect - non-EOS label in IP out - an invalid configuration |
| # so this traffic should be dropped. |
| # |
| route_33_neos = VppMplsRoute(self, 33, 0, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[])]) |
| route_33_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(33), |
| VppMplsLabel(99)]) |
| self.send_and_assert_no_replies( |
| self.pg0, tx, |
| "MPLS non-EOS packets popped and forwarded") |
| |
| # |
| # A recursive EOS x-connect, which resolves through another x-connect |
| # in pipe mode |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_via_label=32, |
| labels=[VppMplsLabel(44), |
| VppMplsLabel(45)])]) |
| route_34_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(34, ttl=3)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(33), |
| VppMplsLabel(44), |
| VppMplsLabel(45, ttl=2)]) |
| |
| self.assertEqual(route_34_eos.get_stats_to()['packets'], 257) |
| self.assertEqual(route_32_neos.get_stats_via()['packets'], 257) |
| |
| # |
| # A recursive EOS x-connect, which resolves through another x-connect |
| # in uniform mode |
| # |
| route_35_eos = VppMplsRoute( |
| self, 35, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_via_label=42, |
| labels=[VppMplsLabel(44)])]) |
| route_35_eos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(35, ttl=3)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(43, ttl=2), |
| VppMplsLabel(44, ttl=2)]) |
| |
| # |
| # A recursive non-EOS x-connect, which resolves through another |
| # x-connect |
| # |
| route_34_neos = VppMplsRoute(self, 34, 0, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_via_label=32, |
| labels=[VppMplsLabel(44), |
| VppMplsLabel(46)])]) |
| route_34_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(34, ttl=45), |
| VppMplsLabel(99)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| # it's the 2nd (counting from 0) label in the stack that is swapped |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(33), |
| VppMplsLabel(44), |
| VppMplsLabel(46, ttl=44), |
| VppMplsLabel(99)]) |
| |
| # |
| # an recursive IP route that resolves through the recursive non-eos |
| # x-connect |
| # |
| ip_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_via_label=34, |
| labels=[VppMplsLabel(55)])]) |
| ip_10_0_0_1.add_vpp_config() |
| |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(33), |
| VppMplsLabel(44), |
| VppMplsLabel(46), |
| VppMplsLabel(55)]) |
| self.assertEqual(ip_10_0_0_1.get_stats_to()['packets'], 257) |
| |
| ip_10_0_0_1.remove_vpp_config() |
| route_34_neos.remove_vpp_config() |
| route_34_eos.remove_vpp_config() |
| route_33_neos.remove_vpp_config() |
| route_33_eos.remove_vpp_config() |
| route_32_neos.remove_vpp_config() |
| route_32_eos.remove_vpp_config() |
| |
| def test_bind(self): |
| """ MPLS Local Label Binding test """ |
| |
| # |
| # Add a non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(45)])]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # bind a local label to the route |
| binding = VppMplsIpBind(self, 44, "10.0.0.1", 32) |
| binding.add_vpp_config() |
| |
| # non-EOS stream |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(44), |
| VppMplsLabel(99)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(45, ttl=63), |
| VppMplsLabel(99)]) |
| |
| # EOS stream |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(44)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled(self.pg0, rx, tx, |
| [VppMplsLabel(45, ttl=63)]) |
| |
| # IP stream |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [VppMplsLabel(45)]) |
| |
| # |
| # cleanup |
| # |
| binding.remove_vpp_config() |
| route_10_0_0_1.remove_vpp_config() |
| |
| def test_imposition(self): |
| """ MPLS label imposition test """ |
| |
| # |
| # Add a non-recursive route with a single out label |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(32)])]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 10.0.0.1 |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, [VppMplsLabel(32)]) |
| |
| # |
| # Add a non-recursive route with a 3 out labels |
| # |
| route_10_0_0_2 = VppIpRoute(self, "10.0.0.2", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(32), |
| VppMplsLabel(33), |
| VppMplsLabel(34)])]) |
| route_10_0_0_2.add_vpp_config() |
| |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.2", |
| ip_ttl=44, ip_dscp=0xff) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(32), |
| VppMplsLabel(33), |
| VppMplsLabel(34)], |
| ip_ttl=43) |
| |
| # |
| # Add a non-recursive route with a single out label in uniform mode |
| # |
| route_10_0_0_3 = VppIpRoute( |
| self, "10.0.0.3", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(32, |
| mode=MplsLspMode.UNIFORM)])]) |
| route_10_0_0_3.add_vpp_config() |
| |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3", |
| ip_ttl=54, ip_dscp=0xbe) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(32, ttl=53, exp=5)]) |
| |
| # |
| # Add a IPv6 non-recursive route with a single out label in |
| # uniform mode |
| # |
| route_2001_3 = VppIpRoute( |
| self, "2001::3", 128, |
| [VppRoutePath(self.pg0.remote_ip6, |
| self.pg0.sw_if_index, |
| proto=DpoProto.DPO_PROTO_IP6, |
| labels=[VppMplsLabel(32, |
| mode=MplsLspMode.UNIFORM)])], |
| is_ip6=1) |
| route_2001_3.add_vpp_config() |
| |
| tx = self.create_stream_ip6(self.pg0, "2001::3", |
| ip_ttl=54, ip_dscp=0xbe) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip6(self.pg0, rx, tx, |
| [VppMplsLabel(32, ttl=53, exp=5)]) |
| |
| # |
| # add a recursive path, with output label, via the 1 label route |
| # |
| route_11_0_0_1 = VppIpRoute(self, "11.0.0.1", 32, |
| [VppRoutePath("10.0.0.1", |
| 0xffffffff, |
| labels=[VppMplsLabel(44)])]) |
| route_11_0_0_1.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 11.0.0.1, should pick up |
| # the label stack for 11.0.0.1 and 10.0.0.1 |
| # |
| tx = self.create_stream_ip4(self.pg0, "11.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(32), |
| VppMplsLabel(44)]) |
| |
| self.assertEqual(route_11_0_0_1.get_stats_to()['packets'], 257) |
| |
| # |
| # add a recursive path, with 2 labels, via the 3 label route |
| # |
| route_11_0_0_2 = VppIpRoute(self, "11.0.0.2", 32, |
| [VppRoutePath("10.0.0.2", |
| 0xffffffff, |
| labels=[VppMplsLabel(44), |
| VppMplsLabel(45)])]) |
| route_11_0_0_2.add_vpp_config() |
| |
| # |
| # a stream that matches the route for 11.0.0.1, should pick up |
| # the label stack for 11.0.0.1 and 10.0.0.1 |
| # |
| tx = self.create_stream_ip4(self.pg0, "11.0.0.2") |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(32), |
| VppMplsLabel(33), |
| VppMplsLabel(34), |
| VppMplsLabel(44), |
| VppMplsLabel(45)]) |
| |
| self.assertEqual(route_11_0_0_2.get_stats_to()['packets'], 257) |
| |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_labelled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(32), |
| VppMplsLabel(33), |
| VppMplsLabel(34), |
| VppMplsLabel(44), |
| VppMplsLabel(45)]) |
| |
| self.assertEqual(route_11_0_0_2.get_stats_to()['packets'], 514) |
| |
| # |
| # cleanup |
| # |
| route_11_0_0_2.remove_vpp_config() |
| route_11_0_0_1.remove_vpp_config() |
| route_10_0_0_2.remove_vpp_config() |
| route_10_0_0_1.remove_vpp_config() |
| |
| def test_tunnel_pipe(self): |
| """ MPLS Tunnel Tests - Pipe """ |
| |
| # |
| # Create a tunnel with a single out label |
| # |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(44), |
| VppMplsLabel(46)])]) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun._sw_if_index)]) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(44), |
| VppMplsLabel(46)]) |
| |
| # |
| # add a labelled route through the new tunnel |
| # |
| route_10_0_0_4 = VppIpRoute(self, "10.0.0.4", 32, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun._sw_if_index, |
| labels=[33])]) |
| route_10_0_0_4.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.4") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(44), |
| VppMplsLabel(46), |
| VppMplsLabel(33, ttl=255)]) |
| |
| def test_tunnel_uniform(self): |
| """ MPLS Tunnel Tests - Uniform """ |
| |
| # |
| # Create a tunnel with a single out label |
| # The label stack is specified here from outer to inner |
| # |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, MplsLspMode.UNIFORM)])]) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun._sw_if_index)]) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3", ip_ttl=24) |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, ttl=23)]) |
| |
| # |
| # add a labelled route through the new tunnel |
| # |
| route_10_0_0_4 = VppIpRoute( |
| self, "10.0.0.4", 32, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun._sw_if_index, |
| labels=[VppMplsLabel(33, ttl=47)])]) |
| route_10_0_0_4.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.4") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture() |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, |
| [VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, ttl=47), |
| VppMplsLabel(33, ttl=47)]) |
| |
| def test_mpls_tunnel_many(self): |
| """ Multiple Tunnels """ |
| |
| for ii in range(10): |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(44, ttl=32), |
| VppMplsLabel(46, MplsLspMode.UNIFORM)])]) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| def test_v4_exp_null(self): |
| """ MPLS V4 Explicit NULL test """ |
| |
| # |
| # The first test case has an MPLS TTL of 0 |
| # all packet should be dropped |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(0, ttl=0)]) |
| self.send_and_assert_no_replies(self.pg0, tx, |
| "MPLS TTL=0 packets forwarded") |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(0)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx) |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG1 is in table 1 |
| # we are ensuring the post-pop lookup occurs in the VRF table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg1, [VppMplsLabel(0)]) |
| rx = self.send_and_expect(self.pg1, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| def test_v6_exp_null(self): |
| """ MPLS V6 Explicit NULL test """ |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(2)]) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| # |
| # a stream with a non-zero MPLS TTL |
| # PG1 is in table 1 |
| # we are ensuring the post-pop lookup occurs in the VRF table |
| # |
| tx = self.create_stream_labelled_ip6(self.pg1, [VppMplsLabel(2)]) |
| rx = self.send_and_expect(self.pg1, tx, self.pg1) |
| self.verify_capture_ip6(self.pg0, rx, tx) |
| |
| def test_deag(self): |
| """ MPLS Deagg """ |
| |
| # |
| # A de-agg route - next-hop lookup in default table |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_table_id=0)]) |
| route_34_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(34)], |
| ping=1, |
| ip_itf=self.pg0) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip4(self.pg0, rx, tx, ping_resp=1) |
| |
| # |
| # A de-agg route - next-hop lookup in non-default table |
| # |
| route_35_eos = VppMplsRoute(self, 35, 1, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff, |
| nh_table_id=1)]) |
| route_35_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the non-default table |
| # PG0 is in the default table. packet arrive labelled in the |
| # default table and egress unlabelled in the non-default |
| # |
| tx = self.create_stream_labelled_ip4( |
| self.pg0, [VppMplsLabel(35)], ping=1, ip_itf=self.pg1) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx, ping_resp=1) |
| |
| # |
| # Double pop |
| # |
| route_36_neos = VppMplsRoute(self, 36, 0, |
| [VppRoutePath("0.0.0.0", |
| 0xffffffff)]) |
| route_36_neos.add_vpp_config() |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(36), |
| VppMplsLabel(35)], |
| ping=1, ip_itf=self.pg1) |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx, ping_resp=1) |
| |
| route_36_neos.remove_vpp_config() |
| route_35_eos.remove_vpp_config() |
| route_34_eos.remove_vpp_config() |
| |
| def test_interface_rx(self): |
| """ MPLS Interface Receive """ |
| |
| # |
| # Add a non-recursive route that will forward the traffic |
| # post-interface-rx |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| table_id=1, |
| paths=[VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index)]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an interface-rx on pg1 and matching a route in table 1 |
| # if the packet egresses, then we must have swapped to pg1 |
| # so as to have matched the route in table 1 |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| self.pg1.sw_if_index, |
| is_interface_rx=1)]) |
| route_34_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(34)], |
| dst_ip="10.0.0.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| def test_mcast_mid_point(self): |
| """ MPLS Multicast Mid Point """ |
| |
| # |
| # Add a non-recursive route that will forward the traffic |
| # post-interface-rx |
| # |
| route_10_0_0_1 = VppIpRoute(self, "10.0.0.1", 32, |
| table_id=1, |
| paths=[VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index)]) |
| route_10_0_0_1.add_vpp_config() |
| |
| # |
| # Add a mcast entry that replicate to pg2 and pg3 |
| # and replicate to a interface-rx (like a bud node would) |
| # |
| route_3400_eos = VppMplsRoute( |
| self, 3400, 1, |
| [VppRoutePath(self.pg2.remote_ip4, |
| self.pg2.sw_if_index, |
| labels=[VppMplsLabel(3401)]), |
| VppRoutePath(self.pg3.remote_ip4, |
| self.pg3.sw_if_index, |
| labels=[VppMplsLabel(3402)]), |
| VppRoutePath("0.0.0.0", |
| self.pg1.sw_if_index, |
| is_interface_rx=1)], |
| is_multicast=1) |
| route_3400_eos.add_vpp_config() |
| |
| # |
| # ping an interface in the default table |
| # PG0 is in the default table |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, |
| [VppMplsLabel(3400, ttl=64)], |
| n=257, |
| dst_ip="10.0.0.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg1.get_capture(257) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_labelled(self.pg2, rx, tx, |
| [VppMplsLabel(3401, ttl=63)]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_labelled(self.pg3, rx, tx, |
| [VppMplsLabel(3402, ttl=63)]) |
| |
| def test_mcast_head(self): |
| """ MPLS Multicast Head-end """ |
| |
| # |
| # Create a multicast tunnel with two replications |
| # |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [VppRoutePath(self.pg2.remote_ip4, |
| self.pg2.sw_if_index, |
| labels=[VppMplsLabel(42)]), |
| VppRoutePath(self.pg3.remote_ip4, |
| self.pg3.sw_if_index, |
| labels=[VppMplsLabel(43)])], |
| is_multicast=1) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # add an unlabelled route through the new tunnel |
| # |
| route_10_0_0_3 = VppIpRoute(self, "10.0.0.3", 32, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun._sw_if_index)]) |
| route_10_0_0_3.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "10.0.0.3") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(42)]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(43)]) |
| |
| # |
| # An an IP multicast route via the tunnel |
| # A (*,G). |
| # one accepting interface, pg0, 1 forwarding interface via the tunnel |
| # |
| route_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| [VppMRoutePath(self.pg0.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_ACCEPT), |
| VppMRoutePath(mpls_tun._sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_232_1_1_1.add_vpp_config() |
| |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_ip4(self.pg0, "232.1.1.1") |
| self.pg0.add_stream(tx) |
| |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg2.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(42)]) |
| rx = self.pg3.get_capture(257) |
| self.verify_capture_tunneled_ip4(self.pg0, rx, tx, [VppMplsLabel(43)]) |
| |
| def test_mcast_ip4_tail(self): |
| """ MPLS IPv4 Multicast Tail """ |
| |
| # |
| # Add a multicast route that will forward the traffic |
| # post-disposition |
| # |
| route_232_1_1_1 = VppIpMRoute( |
| self, |
| "0.0.0.0", |
| "232.1.1.1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| table_id=1, |
| paths=[VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)]) |
| route_232_1_1_1.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an rpf-id and matching a route in table 1 |
| # if the packet egresses, then we must have matched the route in |
| # table 1 |
| # |
| route_34_eos = VppMplsRoute(self, 34, 1, |
| [VppRoutePath("0.0.0.0", |
| self.pg1.sw_if_index, |
| nh_table_id=1, |
| rpf_id=55)], |
| is_multicast=1) |
| |
| route_34_eos.add_vpp_config() |
| |
| # |
| # Drop due to interface lookup miss |
| # |
| self.vapi.cli("clear trace") |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)], |
| dst_ip="232.1.1.1", n=1) |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop none") |
| |
| # |
| # set the RPF-ID of the entry to match the input packet's |
| # |
| route_232_1_1_1.update_rpf_id(55) |
| |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)], |
| dst_ip="232.1.1.1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip4(self.pg1, rx, tx) |
| |
| # |
| # disposed packets have an invalid IPv4 checksum |
| # |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)], |
| dst_ip="232.1.1.1", n=65, |
| chksum=1) |
| self.send_and_assert_no_replies(self.pg0, tx, "Invalid Checksum") |
| |
| # |
| # set the RPF-ID of the entry to not match the input packet's |
| # |
| route_232_1_1_1.update_rpf_id(56) |
| tx = self.create_stream_labelled_ip4(self.pg0, [VppMplsLabel(34)], |
| dst_ip="232.1.1.1") |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop 56") |
| |
| def test_mcast_ip6_tail(self): |
| """ MPLS IPv6 Multicast Tail """ |
| |
| # |
| # Add a multicast route that will forward the traffic |
| # post-disposition |
| # |
| route_ff = VppIpMRoute( |
| self, |
| "::", |
| "ff01::1", 32, |
| MRouteEntryFlags.MFIB_ENTRY_FLAG_NONE, |
| table_id=1, |
| paths=[VppMRoutePath(self.pg1.sw_if_index, |
| MRouteItfFlags.MFIB_ITF_FLAG_FORWARD)], |
| is_ip6=1) |
| route_ff.add_vpp_config() |
| |
| # |
| # An interface receive label that maps traffic to RX on interface |
| # pg1 |
| # by injecting the packet in on pg0, which is in table 0 |
| # doing an rpf-id and matching a route in table 1 |
| # if the packet egresses, then we must have matched the route in |
| # table 1 |
| # |
| route_34_eos = VppMplsRoute( |
| self, 34, 1, |
| [VppRoutePath("::", |
| self.pg1.sw_if_index, |
| nh_table_id=1, |
| rpf_id=55, |
| proto=DpoProto.DPO_PROTO_IP6)], |
| is_multicast=1) |
| |
| route_34_eos.add_vpp_config() |
| |
| # |
| # Drop due to interface lookup miss |
| # |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(34)], |
| dst_ip="ff01::1") |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF Miss") |
| |
| # |
| # set the RPF-ID of the entry to match the input packet's |
| # |
| route_ff.update_rpf_id(55) |
| |
| tx = self.create_stream_labelled_ip6(self.pg0, [VppMplsLabel(34)], |
| dst_ip="ff01::1") |
| rx = self.send_and_expect(self.pg0, tx, self.pg1) |
| self.verify_capture_ip6(self.pg1, rx, tx) |
| |
| # |
| # disposed packets have hop-limit = 1 |
| # |
| tx = self.create_stream_labelled_ip6(self.pg0, |
| [VppMplsLabel(34)], |
| dst_ip="ff01::1", |
| hlim=1) |
| rx = self.send_and_expect(self.pg0, tx, self.pg0) |
| self.verify_capture_ip6_icmp(self.pg0, rx, tx) |
| |
| # |
| # set the RPF-ID of the entry to not match the input packet's |
| # |
| route_ff.update_rpf_id(56) |
| tx = self.create_stream_labelled_ip6(self.pg0, |
| [VppMplsLabel(34)], |
| dst_ip="ff01::1") |
| self.send_and_assert_no_replies(self.pg0, tx, "RPF-ID drop 56") |
| |
| |
| class TestMPLSDisabled(VppTestCase): |
| """ MPLS disabled """ |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLSDisabled, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLSDisabled, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLSDisabled, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(2)) |
| |
| self.tbl = VppMplsTable(self, 0) |
| self.tbl.add_vpp_config() |
| |
| # PG0 is MPLS enabled |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| self.pg0.enable_mpls() |
| |
| # PG 1 is not MPLS enabled |
| self.pg1.admin_up() |
| |
| def tearDown(self): |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.admin_down() |
| |
| self.pg0.disable_mpls() |
| super(TestMPLSDisabled, self).tearDown() |
| |
| def test_mpls_disabled(self): |
| """ MPLS Disabled """ |
| |
| tx = (Ether(src=self.pg1.remote_mac, |
| dst=self.pg1.local_mac) / |
| MPLS(label=32, ttl=64) / |
| IPv6(src="2001::1", dst=self.pg0.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| # |
| # A simple MPLS xconnect - eos label in label out |
| # |
| route_32_eos = VppMplsRoute(self, 32, 1, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[33])]) |
| route_32_eos.add_vpp_config() |
| |
| # |
| # PG1 does not forward IP traffic |
| # |
| self.send_and_assert_no_replies(self.pg1, tx, "MPLS disabled") |
| |
| # |
| # MPLS enable PG1 |
| # |
| self.pg1.enable_mpls() |
| |
| # |
| # Now we get packets through |
| # |
| self.pg1.add_stream(tx) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx = self.pg0.get_capture(1) |
| |
| # |
| # Disable PG1 |
| # |
| self.pg1.disable_mpls() |
| |
| # |
| # PG1 does not forward IP traffic |
| # |
| self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled") |
| self.send_and_assert_no_replies(self.pg1, tx, "IPv6 disabled") |
| |
| |
| class TestMPLSPIC(VppTestCase): |
| """ MPLS PIC edge convergence """ |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLSPIC, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLSPIC, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLSPIC, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| mpls_tbl = VppMplsTable(self, 0) |
| mpls_tbl.add_vpp_config() |
| tbl4 = VppIpTable(self, 1) |
| tbl4.add_vpp_config() |
| tbl6 = VppIpTable(self, 1, is_ip6=1) |
| tbl6.add_vpp_config() |
| |
| # core links |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| self.pg0.enable_mpls() |
| self.pg1.admin_up() |
| self.pg1.config_ip4() |
| self.pg1.resolve_arp() |
| self.pg1.enable_mpls() |
| |
| # VRF (customer facing) link |
| self.pg2.admin_up() |
| self.pg2.set_table_ip4(1) |
| self.pg2.config_ip4() |
| self.pg2.resolve_arp() |
| self.pg2.set_table_ip6(1) |
| self.pg2.config_ip6() |
| self.pg2.resolve_ndp() |
| self.pg3.admin_up() |
| self.pg3.set_table_ip4(1) |
| self.pg3.config_ip4() |
| self.pg3.resolve_arp() |
| self.pg3.set_table_ip6(1) |
| self.pg3.config_ip6() |
| self.pg3.resolve_ndp() |
| |
| def tearDown(self): |
| self.pg0.disable_mpls() |
| self.pg1.disable_mpls() |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.set_table_ip4(0) |
| i.set_table_ip6(0) |
| i.admin_down() |
| super(TestMPLSPIC, self).tearDown() |
| |
| def test_mpls_ibgp_pic(self): |
| """ MPLS iBGP PIC edge convergence |
| |
| 1) setup many iBGP VPN routes via a pair of iBGP peers. |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw the IGP route to one of these peers. |
| 4) check forwarding continues to the remaining peer |
| """ |
| |
| # |
| # IGP+LDP core routes |
| # |
| core_10_0_0_45 = VppIpRoute(self, "10.0.0.45", 32, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[45])]) |
| core_10_0_0_45.add_vpp_config() |
| |
| core_10_0_0_46 = VppIpRoute(self, "10.0.0.46", 32, |
| [VppRoutePath(self.pg1.remote_ip4, |
| self.pg1.sw_if_index, |
| labels=[46])]) |
| core_10_0_0_46.add_vpp_config() |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| pkts = [] |
| for ii in range(64): |
| dst = "192.168.1.%d" % ii |
| vpn_routes.append(VppIpRoute(self, dst, 32, |
| [VppRoutePath("10.0.0.45", |
| 0xffffffff, |
| labels=[145], |
| is_resolve_host=1), |
| VppRoutePath("10.0.0.46", |
| 0xffffffff, |
| labels=[146], |
| is_resolve_host=1)], |
| table_id=1)) |
| vpn_routes[ii].add_vpp_config() |
| |
| pkts.append(Ether(dst=self.pg2.local_mac, |
| src=self.pg2.remote_mac) / |
| IP(src=self.pg2.remote_ip4, dst=dst) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| # |
| # Send the packet stream (one pkt to each VPN route) |
| # - expect a 50-50 split of the traffic |
| # |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0._get_capture(1) |
| rx1 = self.pg1._get_capture(1) |
| |
| # not testing the LB hashing algorithm so we're not concerned |
| # with the split ratio, just as long as neither is 0 |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (post-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # Withdraw one of the IGP routes |
| # |
| core_10_0_0_46.remove_vpp_config() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.vapi.ppcli("clear trace") |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0.get_capture(len(pkts)) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| |
| # |
| # packets should still be forwarded through the remaining peer |
| # |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0.get_capture(64) |
| |
| # |
| # Add the IGP route back and we return to load-balancing |
| # |
| core_10_0_0_46.add_vpp_config() |
| |
| self.pg2.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0._get_capture(1) |
| rx1 = self.pg1._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| def test_mpls_ebgp_pic(self): |
| """ MPLS eBGP PIC edge convergence |
| |
| 1) setup many eBGP VPN routes via a pair of eBGP peers |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw one eBGP path - expect LB across remaining eBGP |
| """ |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| vpn_bindings = [] |
| pkts = [] |
| for ii in range(64): |
| dst = "192.168.1.%d" % ii |
| local_label = 1600 + ii |
| vpn_routes.append(VppIpRoute(self, dst, 32, |
| [VppRoutePath(self.pg2.remote_ip4, |
| 0xffffffff, |
| nh_table_id=1, |
| is_resolve_attached=1), |
| VppRoutePath(self.pg3.remote_ip4, |
| 0xffffffff, |
| nh_table_id=1, |
| is_resolve_attached=1)], |
| table_id=1)) |
| vpn_routes[ii].add_vpp_config() |
| |
| vpn_bindings.append(VppMplsIpBind(self, local_label, dst, 32, |
| ip_table_id=1)) |
| vpn_bindings[ii].add_vpp_config() |
| |
| pkts.append(Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| MPLS(label=local_label, ttl=64) / |
| IP(src=self.pg0.remote_ip4, dst=dst) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (post-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # withdraw the connected prefix on the interface. |
| # |
| self.pg2.unconfig_ip4() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # put the connecteds back |
| # |
| self.pg2.config_ip4() |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| def test_mpls_v6_ebgp_pic(self): |
| """ MPLSv6 eBGP PIC edge convergence |
| |
| 1) setup many eBGP VPNv6 routes via a pair of eBGP peers |
| 2) Check EMCP forwarding to these peers |
| 3) withdraw one eBGP path - expect LB across remaining eBGP |
| """ |
| |
| # |
| # Lot's of VPN routes. We need more the 64 so VPP will build |
| # the fast convergence indirection |
| # |
| vpn_routes = [] |
| vpn_bindings = [] |
| pkts = [] |
| for ii in range(64): |
| dst = "3000::%d" % ii |
| local_label = 1600 + ii |
| vpn_routes.append(VppIpRoute( |
| self, dst, 128, |
| [VppRoutePath(self.pg2.remote_ip6, |
| 0xffffffff, |
| nh_table_id=1, |
| is_resolve_attached=1, |
| proto=DpoProto.DPO_PROTO_IP6), |
| VppRoutePath(self.pg3.remote_ip6, |
| 0xffffffff, |
| nh_table_id=1, |
| proto=DpoProto.DPO_PROTO_IP6, |
| is_resolve_attached=1)], |
| table_id=1, |
| is_ip6=1)) |
| vpn_routes[ii].add_vpp_config() |
| |
| vpn_bindings.append(VppMplsIpBind(self, local_label, dst, 128, |
| ip_table_id=1, |
| is_ip6=1)) |
| vpn_bindings[ii].add_vpp_config() |
| |
| pkts.append(Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| MPLS(label=local_label, ttl=64) / |
| IPv6(src=self.pg0.remote_ip6, dst=dst) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| # |
| # use a test CLI command to stop the FIB walk process, this |
| # will prevent the FIB converging the VPN routes and thus allow |
| # us to probe the interim (post-fail, pre-converge) state |
| # |
| self.vapi.ppcli("test fib-walk-process disable") |
| |
| # |
| # withdraw the connected prefix on the interface. |
| # and shutdown the interface so the ND cache is flushed. |
| # |
| self.pg2.unconfig_ip6() |
| self.pg2.admin_down() |
| |
| # |
| # now all packets should be forwarded through the remaining peer |
| # |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # enable the FIB walk process to converge the FIB |
| # |
| self.vapi.ppcli("test fib-walk-process enable") |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg3.get_capture(len(pkts)) |
| |
| # |
| # put the connecteds back |
| # |
| self.pg2.admin_up() |
| self.pg2.config_ip6() |
| |
| self.pg0.add_stream(pkts) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg2._get_capture(1) |
| rx1 = self.pg3._get_capture(1) |
| self.assertNotEqual(0, len(rx0)) |
| self.assertNotEqual(0, len(rx1)) |
| |
| |
| class TestMPLSL2(VppTestCase): |
| """ MPLS-L2 """ |
| |
| @classmethod |
| def setUpClass(cls): |
| super(TestMPLSL2, cls).setUpClass() |
| |
| @classmethod |
| def tearDownClass(cls): |
| super(TestMPLSL2, cls).tearDownClass() |
| |
| def setUp(self): |
| super(TestMPLSL2, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(2)) |
| |
| # create the default MPLS table |
| self.tables = [] |
| tbl = VppMplsTable(self, 0) |
| tbl.add_vpp_config() |
| self.tables.append(tbl) |
| |
| # use pg0 as the core facing interface |
| self.pg0.admin_up() |
| self.pg0.config_ip4() |
| self.pg0.resolve_arp() |
| self.pg0.enable_mpls() |
| |
| # use the other 2 for customer facing L2 links |
| for i in self.pg_interfaces[1:]: |
| i.admin_up() |
| |
| def tearDown(self): |
| for i in self.pg_interfaces[1:]: |
| i.admin_down() |
| |
| self.pg0.disable_mpls() |
| self.pg0.unconfig_ip4() |
| self.pg0.admin_down() |
| super(TestMPLSL2, self).tearDown() |
| |
| def verify_capture_tunneled_ethernet(self, capture, sent, mpls_labels): |
| capture = verify_filter(capture, sent) |
| |
| self.assertEqual(len(capture), len(sent)) |
| |
| for i in range(len(capture)): |
| tx = sent[i] |
| rx = capture[i] |
| |
| # the MPLS TTL is 255 since it enters a new tunnel |
| verify_mpls_stack(self, rx, mpls_labels) |
| |
| tx_eth = tx[Ether] |
| rx_eth = Ether(scapy.compat.raw(rx[MPLS].payload)) |
| |
| self.assertEqual(rx_eth.src, tx_eth.src) |
| self.assertEqual(rx_eth.dst, tx_eth.dst) |
| |
| def test_vpws(self): |
| """ Virtual Private Wire Service """ |
| |
| # |
| # Create an MPLS tunnel that pushes 1 label |
| # For Ethernet over MPLS the uniform mode is irrelevant since ttl/cos |
| # information is not in the packet, but we test it works anyway |
| # |
| mpls_tun_1 = VppMPLSTunnelInterface( |
| self, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(42, MplsLspMode.UNIFORM)])], |
| is_l2=1) |
| mpls_tun_1.add_vpp_config() |
| mpls_tun_1.admin_up() |
| |
| # |
| # Create a label entry to for 55 that does L2 input to the tunnel |
| # |
| route_55_eos = VppMplsRoute( |
| self, 55, 1, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun_1.sw_if_index, |
| is_interface_rx=1, |
| proto=DpoProto.DPO_PROTO_ETHERNET)]) |
| route_55_eos.add_vpp_config() |
| |
| # |
| # Cross-connect the tunnel with one of the customers L2 interfaces |
| # |
| self.vapi.sw_interface_set_l2_xconnect(self.pg1.sw_if_index, |
| mpls_tun_1.sw_if_index, |
| enable=1) |
| self.vapi.sw_interface_set_l2_xconnect(mpls_tun_1.sw_if_index, |
| self.pg1.sw_if_index, |
| enable=1) |
| |
| # |
| # inject a packet from the core |
| # |
| pcore = (Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| MPLS(label=55, ttl=64) / |
| Ether(dst="00:00:de:ad:ba:be", |
| src="00:00:de:ad:be:ef") / |
| IP(src="10.10.10.10", dst="11.11.11.11") / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| tx0 = pcore * 65 |
| rx0 = self.send_and_expect(self.pg0, tx0, self.pg1) |
| payload = pcore[MPLS].payload |
| |
| self.assertEqual(rx0[0][Ether].dst, payload[Ether].dst) |
| self.assertEqual(rx0[0][Ether].src, payload[Ether].src) |
| |
| # |
| # Inject a packet from the customer/L2 side |
| # |
| tx1 = pcore[MPLS].payload * 65 |
| rx1 = self.send_and_expect(self.pg1, tx1, self.pg0) |
| |
| self.verify_capture_tunneled_ethernet(rx1, tx1, [VppMplsLabel(42)]) |
| |
| def test_vpls(self): |
| """ Virtual Private LAN Service """ |
| # |
| # Create an L2 MPLS tunnel |
| # |
| mpls_tun = VppMPLSTunnelInterface( |
| self, |
| [VppRoutePath(self.pg0.remote_ip4, |
| self.pg0.sw_if_index, |
| labels=[VppMplsLabel(42)])], |
| is_l2=1) |
| mpls_tun.add_vpp_config() |
| mpls_tun.admin_up() |
| |
| # |
| # Create a label entry to for 55 that does L2 input to the tunnel |
| # |
| route_55_eos = VppMplsRoute( |
| self, 55, 1, |
| [VppRoutePath("0.0.0.0", |
| mpls_tun.sw_if_index, |
| is_interface_rx=1, |
| proto=DpoProto.DPO_PROTO_ETHERNET)]) |
| route_55_eos.add_vpp_config() |
| |
| # |
| # add to tunnel to the customers bridge-domain |
| # |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=mpls_tun.sw_if_index, bd_id=1) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.pg1.sw_if_index, bd_id=1) |
| |
| # |
| # Packet from the customer interface and from the core |
| # |
| p_cust = (Ether(dst="00:00:de:ad:ba:be", |
| src="00:00:de:ad:be:ef") / |
| IP(src="10.10.10.10", dst="11.11.11.11") / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| p_core = (Ether(src="00:00:de:ad:ba:be", |
| dst="00:00:de:ad:be:ef") / |
| IP(dst="10.10.10.10", src="11.11.11.11") / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| |
| # |
| # The BD is learning, so send in one of each packet to learn |
| # |
| p_core_encap = (Ether(dst=self.pg0.local_mac, |
| src=self.pg0.remote_mac) / |
| MPLS(label=55, ttl=64) / |
| p_core) |
| |
| self.pg1.add_stream(p_cust) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| self.pg0.add_stream(p_core_encap) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| # we've learnt this so expect it be be forwarded |
| rx0 = self.pg1.get_capture(1) |
| |
| self.assertEqual(rx0[0][Ether].dst, p_core[Ether].dst) |
| self.assertEqual(rx0[0][Ether].src, p_core[Ether].src) |
| |
| # |
| # now a stream in each direction |
| # |
| self.pg1.add_stream(p_cust * 65) |
| self.pg_enable_capture(self.pg_interfaces) |
| self.pg_start() |
| |
| rx0 = self.pg0.get_capture(65) |
| |
| self.verify_capture_tunneled_ethernet(rx0, p_cust*65, |
| [VppMplsLabel(42)]) |
| |
| # |
| # remove interfaces from customers bridge-domain |
| # |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=mpls_tun.sw_if_index, bd_id=1, enable=0) |
| self.vapi.sw_interface_set_l2_bridge( |
| rx_sw_if_index=self.pg1.sw_if_index, bd_id=1, enable=0) |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |