| .. _interface: | |
| .. toctree:: | |
| .. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ . | |
| Show Bridge-Domain | |
| =================== | |
| `Show Bridge-Domain <../interface/hardware.html#show-bridge-domain>`_ | |
| Show Interface | |
| ================ | |
| `Show Interface <../interface/basic.html#show-interface>`_ | |
| Show IP Arp | |
| ============ | |
| Summary/Usage | |
| --------------- | |
| show ip arp | |
| Description | |
| ------------ | |
| Display all the IPv4 ARP entries. | |
| Example Usage | |
| -------------- | |
| Example of how to display the IPv4 ARP table: | |
| .. code-block:: console | |
| vpp# **show ip arp** | |
| Time FIB IP4 Flags Ethernet Interface | |
| 346.3028 0 6.1.1.3 de:ad:be:ef:ba:be GigabitEthernet2/0/0 | |
| 3077.4271 0 6.1.1.4 S de:ad:be:ef:ff:ff GigabitEthernet2/0/0 | |
| 2998.6409 1 6.2.2.3 de:ad:be:ef:00:01 GigabitEthernet2/0/0 | |
| Proxy arps enabled for: | |
| Fib_index 0 6.0.0.1 - 6.0.0.11 | |
| Declaration and Implementation | |
| ------------------------------- | |
| **Declaration:** show_ip4_arp_command (src/vnet/ethernet/arp.c line 1465) | |
| **Implementation:** show_ip4_arp | |
| Show IP Fib | |
| ============= | |
| Summary/Usage | |
| --------------- | |
| show ip fib [summary] [table <*table-id*>] [index <*fib-id*>] [<*ip4-addr*>[/<*mask*>]] [mtrie] [detail] | |
| Description | |
| ------------ | |
| This command displays the IPv4 FIB Tables (VRF Tables) and the route entries for each table. | |
| .. note:: | |
| This command will run for a long time when the FIB tables are comprised of | |
| millions of entries. For those senarios, consider displaying a single table or summary mode. | |
| Example Usage | |
| -------------- | |
| Example of how to display all the IPv4 FIB tables: | |
| .. code-block:: console | |
| vpp# **show ip fib** | |
| ipv4-VRF:0, fib_index 0, flow hash: src dst sport dport proto | |
| 0.0.0.0/0 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:0 buckets:1 uRPF:0 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 0.0.0.0/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:1 buckets:1 uRPF:1 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 6.0.1.2/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:30 buckets:1 uRPF:29 to:[0:0]] | |
| [0] [@3]: arp-ipv4: via 6.0.0.1 af_packet0 | |
| 7.0.0.1/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:31 buckets:4 uRPF:30 to:[0:0]] | |
| [0] [@3]: arp-ipv4: via 6.0.0.2 af_packet0 | |
| [1] [@3]: arp-ipv4: via 6.0.0.2 af_packet0 | |
| [2] [@3]: arp-ipv4: via 6.0.0.2 af_packet0 | |
| [3] [@3]: arp-ipv4: via 6.0.0.1 af_packet0 | |
| 224.0.0.0/8 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:3 buckets:1 uRPF:3 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 240.0.0.0/8 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:2 buckets:1 uRPF:2 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 255.255.255.255/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:4 buckets:1 uRPF:4 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| ipv4-VRF:7, fib_index 1, flow hash: src dst sport dport proto | |
| 0.0.0.0/0 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:12 buckets:1 uRPF:11 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 0.0.0.0/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:13 buckets:1 uRPF:12 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 172.16.1.0/24 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:17 buckets:1 uRPF:16 to:[0:0]] | |
| [0] [@4]: ipv4-glean: af_packet0 | |
| 172.16.1.1/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:18 buckets:1 uRPF:17 to:[1:84]] | |
| [0] [@2]: dpo-receive: 172.16.1.1 on af_packet0 | |
| 172.16.1.2/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:21 buckets:1 uRPF:20 to:[0:0]] | |
| [0] [@5]: ipv4 via 172.16.1.2 af_packet0: IP4: 02:fe:9e:70:7a:2b -> 26:a5:f6:9c:3a:36 | |
| 172.16.2.0/24 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:19 buckets:1 uRPF:18 to:[0:0]] | |
| [0] [@4]: ipv4-glean: af_packet1 | |
| 172.16.2.1/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:20 buckets:1 uRPF:19 to:[0:0]] | |
| [0] [@2]: dpo-receive: 172.16.2.1 on af_packet1 | |
| 224.0.0.0/8 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:15 buckets:1 uRPF:14 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 240.0.0.0/8 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:14 buckets:1 uRPF:13 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 255.255.255.255/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:16 buckets:1 uRPF:15 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| Example of how to display a single IPv4 FIB table: | |
| .. code-block:: console | |
| vpp# **show ip fib table 7** | |
| ipv4-VRF:7, fib_index 1, flow hash: src dst sport dport proto | |
| 0.0.0.0/0 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:12 buckets:1 uRPF:11 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 0.0.0.0/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:13 buckets:1 uRPF:12 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 172.16.1.0/24 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:17 buckets:1 uRPF:16 to:[0:0]] | |
| [0] [@4]: ipv4-glean: af_packet0 | |
| 172.16.1.1/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:18 buckets:1 uRPF:17 to:[1:84]] | |
| [0] [@2]: dpo-receive: 172.16.1.1 on af_packet0 | |
| 172.16.1.2/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:21 buckets:1 uRPF:20 to:[0:0]] | |
| [0] [@5]: ipv4 via 172.16.1.2 af_packet0: IP4: 02:fe:9e:70:7a:2b -*> 26:a5:f6:9c:3a:36 | |
| 172.16.2.0/24 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:19 buckets:1 uRPF:18 to:[0:0]] | |
| [0] [@4]: ipv4-glean: af_packet1 | |
| 172.16.2.1/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:20 buckets:1 uRPF:19 to:[0:0]] | |
| [0] [@2]: dpo-receive: 172.16.2.1 on af_packet1 | |
| 224.0.0.0/8 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:15 buckets:1 uRPF:14 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 240.0.0.0/8 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:14 buckets:1 uRPF:13 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| 255.255.255.255/32 | |
| unicast-ip4-chain | |
| [@0]: dpo-load-balance: [index:16 buckets:1 uRPF:15 to:[0:0]] | |
| [0] [@0]: dpo-drop ip6 | |
| Example of how to display a summary of all IPv4 FIB tables: | |
| .. code-block:: console | |
| vpp# **show ip fib summary** | |
| ipv4-VRF:0, fib_index 0, flow hash: src dst sport dport proto | |
| Prefix length Count | |
| 0 1 | |
| 8 2 | |
| 32 4 | |
| ipv4-VRF:7, fib_index 1, flow hash: src dst sport dport proto | |
| Prefix length Count | |
| 0 1 | |
| 8 2 | |
| 24 2 | |
| 32 4 | |
| Declaration and Implementation | |
| ------------------------------- | |
| **Declaration:** ip4_show_fib_command (src/vnet/fib/ip4_fib.c line 873) | |
| **Implementation:** ip4_show_fib | |
| Show L2fib | |
| ============ | |
| Summary/Usage | |
| ------------------ | |
| show l2fib [all] | [bd_id <*nn*> | bd_index <*nn*>] [learn | add] | [raw] | |
| Description | |
| ------------ | |
| This command displays the MAC Address entries of the L2 FIB table. | |
| Output can be filtered to just get the number of MAC Addresses or display each | |
| MAC Address for all bridge domains or just a single bridge domain. | |
| Example Usage | |
| -------------- | |
| Example of how to display the number of MAC Address entries in the L2 FIB table: | |
| .. code-block:: console | |
| vpp# **show l2fib** | |
| 3 l2fib entries | |
| Example of how to display all the MAC Address entries in the L2 FIB table: | |
| vpp# **show l2fib all** | |
| Mac Address BD Idx Interface Index static filter bvi refresh timestamp | |
| 52:54:00:53:18:33 1 GigabitEthernet0/8/0.200 3 0 0 0 0 0 | |
| 52:54:00:53:18:55 1 GigabitEthernet0/8/0.200 3 1 0 0 0 0 | |
| 52:54:00:53:18:77 1 N/A -1 1 1 0 0 0 | |
| 3 l2fib entries | |
| Declaration and Implementation | |
| ------------------------------- | |
| **Declaration:** show_l2fib_cli (src/vnet/l2/l2_fib.c line 311) | |
| **Implementation:** show_l2fib | |
| Show Trace | |
| =========== | |
| Summary/Usage | |
| -------------- | |
| show trace buffer [max COUNT] | |
| Declaration and Implementation | |
| ------------------------------ | |
| **Declaration:** show_trace_cli (src/vlib/trace.c line 347) | |
| **Implementation:** cli_show_trace_buffer | |
| Show Vhost-User | |
| ================ | |
| `Show Vhost-User <../vhost/vhostuser.html#show-vhost-user>`_ | |