| /* |
| * sr_mpls_policy.c: SR-MPLS policies |
| * |
| * Copyright (c) 2016 Cisco and/or its affiliates. Licensed under the Apache |
| * License, Version 2.0 (the "License"); you may not use this file except in |
| * compliance with the License. You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| * License for the specific language governing permissions and limitations |
| * under the License. |
| */ |
| |
| /** |
| * @file |
| * @brief SR MPLS policy creation and application |
| * |
| * Create an SR policy. |
| * An SR policy can be either of 'default' type or 'spray' type |
| * An SR policy has attached a list of SID lists. |
| * In case the SR policy is a default one it will load balance among them. |
| * An SR policy has associated a BindingSID. |
| * In case any packet arrives with MPLS_label == BindingSID then the SR policy |
| * associated to such bindingSID will be applied to such packet. |
| * Also, a BSID can be associated with a (Next-Hop, Color) |
| * |
| */ |
| |
| #include <vlib/vlib.h> |
| #include <vnet/vnet.h> |
| #include <vnet/srmpls/sr_mpls.h> |
| #include <vnet/fib/mpls_fib.h> |
| #include <vnet/dpo/dpo.h> |
| #include <vnet/ip/ip.h> |
| |
| #include <vppinfra/error.h> |
| #include <vppinfra/elog.h> |
| |
| mpls_sr_main_t sr_mpls_main; |
| |
| /*************************** SR LB helper functions **************************/ |
| /** |
| * @brief Creates a Segment List and adds it to an SR policy |
| * |
| * Creates a Segment List and adds it to the SR policy. Notice that the SL are |
| * not necessarily unique. Hence there might be two Segment List within the |
| * same SR Policy with exactly the same segments and same weight. |
| * |
| * @param sr_policy is the SR policy where the SL will be added |
| * @param sl is a vector of IPv6 addresses composing the Segment List |
| * @param weight is the weight of the SegmentList (for load-balancing purposes) |
| * @param is_encap represents the mode (SRH insertion vs Encapsulation) |
| * |
| * @return pointer to the just created segment list |
| */ |
| static inline mpls_sr_sl_t * |
| create_sl (mpls_sr_policy_t * sr_policy, mpls_label_t * sl, u32 weight) |
| { |
| mpls_sr_main_t *sm = &sr_mpls_main; |
| mpls_sr_sl_t *segment_list; |
| |
| pool_get (sm->sid_lists, segment_list); |
| memset (segment_list, 0, sizeof (*segment_list)); |
| |
| vec_add1 (sr_policy->segments_lists, segment_list - sm->sid_lists); |
| |
| /* Fill in segment list */ |
| segment_list->weight = |
| (weight != (u32) ~ 0 ? weight : SR_SEGMENT_LIST_WEIGHT_DEFAULT); |
| segment_list->segments = vec_dup (sl); |
| |
| mpls_eos_bit_t eos; |
| FOR_EACH_MPLS_EOS_BIT (eos) |
| { |
| fib_route_path_t path = { |
| .frp_proto = DPO_PROTO_MPLS, |
| .frp_sw_if_index = ~0, |
| .frp_fib_index = 0, |
| .frp_weight = segment_list->weight, |
| .frp_flags = FIB_ROUTE_PATH_FLAG_NONE, |
| .frp_label_stack = NULL, |
| .frp_local_label = sl[0], |
| }; |
| |
| vec_add (path.frp_label_stack, sl + 1, vec_len (sl) - 1); |
| |
| fib_route_path_t *paths = NULL; |
| vec_add1 (paths, path); |
| |
| /* *INDENT-OFF* */ |
| fib_prefix_t pfx = { |
| .fp_len = 21, |
| .fp_proto = FIB_PROTOCOL_MPLS, |
| .fp_label = sr_policy->bsid, |
| .fp_eos = eos, |
| .fp_payload_proto = DPO_PROTO_MPLS, |
| }; |
| /* *INDENT-ON* */ |
| |
| fib_table_entry_path_add2 (0, |
| &pfx, |
| FIB_SOURCE_SR, |
| (sr_policy->type == SR_POLICY_TYPE_DEFAULT ? |
| FIB_ENTRY_FLAG_NONE : |
| FIB_ENTRY_FLAG_MULTICAST), paths); |
| vec_free (paths); |
| } |
| |
| return segment_list; |
| } |
| |
| /******************************* SR rewrite API *******************************/ |
| /* |
| * Three functions for handling sr policies: -> sr_mpls_policy_add -> |
| * sr_mpls_policy_del -> sr_mpls_policy_mod All of them are API. CLI function |
| * on sr_policy_command_fn |
| */ |
| |
| /** |
| * @brief Create a new SR policy |
| * |
| * @param bsid is the bindingSID of the SR Policy |
| * @param segments is a vector of MPLS labels composing the segment list |
| * @param behavior is the behavior of the SR policy. (default//spray) |
| * @param fib_table is the VRF where to install the FIB entry for the BSID |
| * @param weight is the weight of this specific SID list |
| * |
| * @return 0 if correct, else error |
| */ |
| int |
| sr_mpls_policy_add (mpls_label_t bsid, mpls_label_t * segments, |
| u8 behavior, u32 weight) |
| { |
| mpls_sr_main_t *sm = &sr_mpls_main; |
| mpls_sr_policy_t *sr_policy = 0; |
| uword *p; |
| |
| if (!sm->sr_policies_index_hash) |
| sm->sr_policies_index_hash = hash_create (0, sizeof (mpls_label_t)); |
| |
| /* Search for existing keys (BSID) */ |
| p = hash_get (sm->sr_policies_index_hash, bsid); |
| if (p) |
| { |
| /* Add SR policy that already exists; complain */ |
| return -12; |
| } |
| /* Add an SR policy object */ |
| pool_get (sm->sr_policies, sr_policy); |
| memset (sr_policy, 0, sizeof (*sr_policy)); |
| sr_policy->bsid = bsid; |
| sr_policy->type = behavior; |
| sr_policy->endpoint_type = 0; |
| ip6_address_set_zero (&sr_policy->endpoint.ip6); |
| sr_policy->color = (u32) ~ 0; |
| |
| /* Copy the key */ |
| hash_set (sm->sr_policies_index_hash, bsid, sr_policy - sm->sr_policies); |
| |
| /* Create a segment list and add the index to the SR policy */ |
| create_sl (sr_policy, segments, weight); |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Delete a SR policy |
| * |
| * @param bsid is the bindingSID of the SR Policy |
| * @param index is the index of the SR policy |
| * |
| * @return 0 if correct, else error |
| */ |
| int |
| sr_mpls_policy_del (mpls_label_t bsid) |
| { |
| mpls_sr_main_t *sm = &sr_mpls_main; |
| mpls_sr_policy_t *sr_policy = 0; |
| mpls_sr_sl_t *segment_list; |
| mpls_eos_bit_t eos; |
| u32 *sl_index; |
| uword *p; |
| |
| if (!sm->sr_policies_index_hash) |
| sm->sr_policies_index_hash = hash_create (0, sizeof (mpls_label_t)); |
| |
| p = hash_get (sm->sr_policies_index_hash, bsid); |
| if (p) |
| sr_policy = pool_elt_at_index (sm->sr_policies, p[0]); |
| else |
| return -1; |
| |
| /* Clean SID Lists */ |
| vec_foreach (sl_index, sr_policy->segments_lists) |
| { |
| segment_list = pool_elt_at_index (sm->sid_lists, *sl_index); |
| |
| fib_route_path_t path = { |
| .frp_proto = DPO_PROTO_MPLS, |
| .frp_sw_if_index = ~0, |
| .frp_fib_index = 0, |
| .frp_weight = segment_list->weight, |
| .frp_flags = FIB_ROUTE_PATH_FLAG_NONE, |
| .frp_local_label = segment_list->segments[0], |
| }; |
| |
| vec_add (path.frp_label_stack, segment_list + 1, |
| vec_len (segment_list) - 1); |
| |
| fib_route_path_t *paths = NULL; |
| vec_add1 (paths, path); |
| |
| /* remove each of the MPLS routes */ |
| FOR_EACH_MPLS_EOS_BIT (eos) |
| { |
| /* *INDENT-OFF* */ |
| fib_prefix_t pfx = { |
| .fp_len = 21, |
| .fp_proto = FIB_PROTOCOL_MPLS, |
| .fp_label = sr_policy->bsid, |
| .fp_eos = eos, |
| .fp_payload_proto = DPO_PROTO_MPLS, |
| }; |
| /* *INDENT-ON* */ |
| |
| fib_table_entry_path_remove2 (0, &pfx, FIB_SOURCE_SR, paths); |
| } |
| vec_free (paths); |
| vec_free (segment_list->segments); |
| pool_put_index (sm->sid_lists, *sl_index); |
| } |
| |
| /* If there is still traces of TE, make sure locks are released */ |
| if (sr_policy->endpoint_type != 0 && sr_policy->color != (u32) ~ 0) |
| { |
| sr_mpls_policy_assign_endpoint_color (bsid, NULL, 0, (u32) ~ 0); |
| } |
| |
| /* Remove SR policy entry */ |
| hash_unset (sm->sr_policies_index_hash, sr_policy->bsid); |
| pool_put (sm->sr_policies, sr_policy); |
| |
| return 0; |
| } |
| |
| /** |
| * @brief Modify an existing SR policy |
| * |
| * The possible modifications are adding a new Segment List, modifying an |
| * existing Segment List (modify the weight only) and delete a given |
| * Segment List from the SR Policy. |
| * |
| * @param bsid is the bindingSID of the SR Policy |
| * @param fib_table is the VRF where to install the FIB entry for the BSID |
| * @param operation is the operation to perform (among the top ones) |
| * @param segments is a vector of IPv6 address composing the segment list |
| * @param sl_index is the index of the Segment List to modify/delete |
| * @param weight is the weight of the sid list. optional. |
| * |
| * @return 0 ok, >0 index of SL, <0 error |
| */ |
| int |
| sr_mpls_policy_mod (mpls_label_t bsid, u8 operation, |
| mpls_label_t * segments, u32 sl_index, u32 weight) |
| { |
| mpls_sr_main_t *sm = &sr_mpls_main; |
| mpls_sr_policy_t *sr_policy = 0; |
| mpls_sr_sl_t *segment_list; |
| u32 *sl_index_iterate; |
| uword *p; |
| |
| if (!sm->sr_policies_index_hash) |
| sm->sr_policies_index_hash = hash_create (0, sizeof (mpls_label_t)); |
| |
| p = hash_get (sm->sr_policies_index_hash, bsid); |
| if (p) |
| sr_policy = pool_elt_at_index (sm->sr_policies, p[0]); |
| else |
| return -1; |
| |
| if (operation == 1) |
| { /* Add SR List to an existing SR policy */ |
| /* Create the new SL */ |
| segment_list = create_sl (sr_policy, segments, weight); |
| return segment_list - sm->sid_lists; |
| } |
| else if (operation == 2) |
| { /* Delete SR List from an existing SR |
| * policy */ |
| /* Check that currently there are more than one SID list */ |
| if (vec_len (sr_policy->segments_lists) == 1) |
| return -21; |
| |
| /* |
| * Check that the SR list does exist and is assigned to the |
| * sr policy |
| */ |
| vec_foreach (sl_index_iterate, sr_policy->segments_lists) |
| if (*sl_index_iterate == sl_index) |
| break; |
| |
| if (*sl_index_iterate != sl_index) |
| return -22; |
| |
| /* Remove the lucky SR list that is being kicked out */ |
| segment_list = pool_elt_at_index (sm->sid_lists, sl_index); |
| |
| mpls_eos_bit_t eos; |
| fib_route_path_t path = { |
| .frp_proto = DPO_PROTO_MPLS, |
| .frp_sw_if_index = ~0, |
| .frp_fib_index = 0, |
| .frp_weight = segment_list->weight, |
| .frp_flags = FIB_ROUTE_PATH_FLAG_NONE, |
| .frp_local_label = segment_list->segments[0], |
| }; |
| |
| vec_add (path.frp_label_stack, segment_list + 1, |
| vec_len (segment_list) - 1); |
| |
| fib_route_path_t *paths = NULL; |
| vec_add1 (paths, path); |
| |
| FOR_EACH_MPLS_EOS_BIT (eos) |
| { |
| /* *INDENT-OFF* */ |
| fib_prefix_t pfx = { |
| .fp_len = 21, |
| .fp_proto = FIB_PROTOCOL_MPLS, |
| .fp_label = sr_policy->bsid, |
| .fp_eos = eos, |
| .fp_payload_proto = DPO_PROTO_MPLS, |
| }; |
| /* *INDENT-ON* */ |
| |
| fib_table_entry_path_remove2 (0, &pfx, FIB_SOURCE_SR, paths); |
| } |
| |
| vec_free (paths); |
| vec_free (segment_list->segments); |
| pool_put_index (sm->sid_lists, sl_index); |
| vec_del1 (sr_policy->segments_lists, |
| sl_index_iterate - sr_policy->segments_lists); |
| } |
| else if (operation == 3) |
| { /* Modify the weight of an existing |
| * SR List */ |
| /* Find the corresponding SL */ |
| vec_foreach (sl_index_iterate, sr_policy->segments_lists) |
| if (*sl_index_iterate == sl_index) |
| break; |
| |
| if (*sl_index_iterate != sl_index) |
| return -32; |
| |
| /* Change the weight */ |
| segment_list = pool_elt_at_index (sm->sid_lists, sl_index); |
| |
| /* Update LB */ |
| mpls_eos_bit_t eos; |
| fib_route_path_t path = { |
| .frp_proto = DPO_PROTO_MPLS, |
| .frp_sw_if_index = ~0, |
| .frp_fib_index = 0, |
| .frp_weight = segment_list->weight, |
| .frp_flags = FIB_ROUTE_PATH_FLAG_NONE, |
| .frp_local_label = segment_list->segments[0], |
| }; |
| |
| vec_add (path.frp_label_stack, segment_list + 1, |
| vec_len (segment_list) - 1); |
| |
| fib_route_path_t *paths = NULL; |
| vec_add1 (paths, path); |
| |
| FOR_EACH_MPLS_EOS_BIT (eos) |
| { |
| /* *INDENT-OFF* */ |
| fib_prefix_t pfx = { |
| .fp_len = 21, |
| .fp_proto = FIB_PROTOCOL_MPLS, |
| .fp_label = sr_policy->bsid, |
| .fp_eos = eos, |
| .fp_payload_proto = DPO_PROTO_MPLS, |
| }; |
| /* *INDENT-ON* */ |
| |
| fib_table_entry_path_remove2 (0, &pfx, FIB_SOURCE_SR, paths); |
| } |
| |
| segment_list->weight = weight; |
| |
| path.frp_weight = segment_list->weight; |
| |
| vec_free (paths); |
| paths = NULL; |
| vec_add1 (paths, path); |
| |
| FOR_EACH_MPLS_EOS_BIT (eos) |
| { |
| /* *INDENT-OFF* */ |
| fib_prefix_t pfx = { |
| .fp_len = 21, |
| .fp_proto = FIB_PROTOCOL_MPLS, |
| .fp_label = sr_policy->bsid, |
| .fp_eos = eos, |
| .fp_payload_proto = DPO_PROTO_MPLS, |
| }; |
| /* *INDENT-ON* */ |
| |
| fib_table_entry_path_add2 (0, |
| &pfx, |
| FIB_SOURCE_SR, |
| (sr_policy->type == |
| SR_POLICY_TYPE_DEFAULT ? |
| FIB_ENTRY_FLAG_NONE : |
| FIB_ENTRY_FLAG_MULTICAST), paths); |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * @brief CLI for 'sr mpls policies' command family |
| */ |
| static clib_error_t * |
| sr_mpls_policy_command_fn (vlib_main_t * vm, unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| int rv = -1; |
| char is_del = 0, is_add = 0, is_mod = 0; |
| char policy_set = 0; |
| mpls_label_t bsid, next_label; |
| u32 sl_index = (u32) ~ 0; |
| u32 weight = (u32) ~ 0; |
| mpls_label_t *segments = 0; |
| u8 operation = 0; |
| u8 is_spray = 0; |
| |
| while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (!is_add && !is_mod && !is_del && unformat (input, "add")) |
| is_add = 1; |
| else if (!is_add && !is_mod && !is_del && unformat (input, "del")) |
| is_del = 1; |
| else if (!is_add && !is_mod && !is_del && unformat (input, "mod")) |
| is_mod = 1; |
| else if (!policy_set |
| && unformat (input, "bsid %U", unformat_mpls_unicast_label, |
| &bsid)) |
| policy_set = 1; |
| else if (unformat (input, "weight %d", &weight)); |
| else if (unformat |
| (input, "next %U", unformat_mpls_unicast_label, &next_label)) |
| { |
| vec_add (segments, &next_label, 1); |
| } |
| else if (unformat (input, "add sl")) |
| operation = 1; |
| else if (unformat (input, "del sl index %d", &sl_index)) |
| operation = 2; |
| else if (unformat (input, "mod sl index %d", &sl_index)) |
| operation = 3; |
| else if (unformat (input, "spray")) |
| is_spray = 1; |
| else |
| break; |
| } |
| |
| if (!is_add && !is_mod && !is_del) |
| return clib_error_return (0, "Incorrect CLI"); |
| |
| if (!policy_set) |
| return clib_error_return (0, "No SR policy BSID or index specified"); |
| |
| if (is_add) |
| { |
| if (vec_len (segments) == 0) |
| return clib_error_return (0, "No Segment List specified"); |
| |
| rv = sr_mpls_policy_add (bsid, segments, |
| (is_spray ? SR_POLICY_TYPE_SPRAY : |
| SR_POLICY_TYPE_DEFAULT), weight); |
| } |
| else if (is_del) |
| rv = sr_mpls_policy_del (bsid); |
| else if (is_mod) |
| { |
| if (!operation) |
| return clib_error_return (0, "No SL modification specified"); |
| if (operation != 1 && sl_index == (u32) ~ 0) |
| return clib_error_return (0, "No Segment List index specified"); |
| if (operation == 1 && vec_len (segments) == 0) |
| return clib_error_return (0, "No Segment List specified"); |
| if (operation == 3 && weight == (u32) ~ 0) |
| return clib_error_return (0, "No new weight for the SL specified"); |
| rv = sr_mpls_policy_mod (bsid, operation, segments, sl_index, weight); |
| } |
| switch (rv) |
| { |
| case 0: |
| break; |
| case 1: |
| return 0; |
| case -12: |
| return clib_error_return (0, |
| "There is already a FIB entry for the BindingSID address.\n" |
| "The SR policy could not be created."); |
| case -21: |
| return clib_error_return (0, |
| "The selected SR policy only contains ONE segment list. " |
| "Please remove the SR policy instead"); |
| case -22: |
| return clib_error_return (0, |
| "Could not delete the segment list. " |
| "It is not associated with that SR policy."); |
| case -23: |
| return clib_error_return (0, |
| "Could not delete the segment list. " |
| "It is not associated with that SR policy."); |
| case -32: |
| return clib_error_return (0, |
| "Could not modify the segment list. " |
| "The given SL is not associated with such SR policy."); |
| default: |
| return clib_error_return (0, "BUG: sr policy returns %d", rv); |
| } |
| return 0; |
| } |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND(sr_mpls_policy_command, static)= |
| { |
| .path = "sr mpls policy", |
| .short_help = "sr mpls policy [add||del||mod] bsid 2999 " |
| "next 10 next 20 next 30 (weight 1) (spray)", |
| .long_help = "TBD.\n", |
| .function = sr_mpls_policy_command_fn, |
| }; |
| /* *INDENT-ON* */ |
| |
| /** |
| * @brief CLI to display onscreen all the SR MPLS policies |
| */ |
| static clib_error_t * |
| show_sr_mpls_policies_command_fn (vlib_main_t * vm, unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| mpls_sr_main_t *sm = &sr_mpls_main; |
| mpls_sr_sl_t *segment_list = 0; |
| mpls_sr_policy_t *sr_policy = 0; |
| mpls_sr_policy_t **vec_policies = 0; |
| mpls_label_t *label; |
| u32 *sl_index; |
| u8 *s; |
| int i = 0; |
| |
| vlib_cli_output (vm, "SR MPLS policies:"); |
| |
| /* *INDENT-OFF* */ |
| pool_foreach(sr_policy, sm->sr_policies, { |
| vec_add1(vec_policies, sr_policy); |
| }); |
| /* *INDENT-ON* */ |
| |
| vec_foreach_index (i, vec_policies) |
| { |
| sr_policy = vec_policies[i]; |
| vlib_cli_output (vm, "[%u].-\tBSID: %U", |
| (u32) (sr_policy - sm->sr_policies), |
| format_mpls_unicast_label, sr_policy->bsid); |
| switch (sr_policy->endpoint_type) |
| { |
| case SR_STEER_IPV6: |
| vlib_cli_output (vm, "\tEndpoint: %U", format_ip6_address, |
| &sr_policy->endpoint.ip6); |
| vlib_cli_output (vm, "\tColor: %u", sr_policy->color); |
| break; |
| case SR_STEER_IPV4: |
| vlib_cli_output (vm, "\tEndpoint: %U", format_ip4_address, |
| &sr_policy->endpoint.ip4); |
| vlib_cli_output (vm, "\tColor: %u", sr_policy->color); |
| break; |
| default: |
| vlib_cli_output (vm, "\tTE disabled"); |
| } |
| vlib_cli_output (vm, "\tType: %s", |
| (sr_policy->type == |
| SR_POLICY_TYPE_DEFAULT ? "Default" : "Spray")); |
| vlib_cli_output (vm, "\tSegment Lists:"); |
| vec_foreach (sl_index, sr_policy->segments_lists) |
| { |
| s = NULL; |
| segment_list = pool_elt_at_index (sm->sid_lists, *sl_index); |
| s = format (s, "\t[%u].- ", *sl_index); |
| s = format (s, "< "); |
| vec_foreach (label, segment_list->segments) |
| { |
| s = format (s, "%U, ", format_mpls_unicast_label, *label); |
| } |
| s = format (s, "\b\b > "); |
| vlib_cli_output (vm, " %s", s); |
| } |
| vlib_cli_output (vm, "-----------"); |
| } |
| vec_free (vec_policies); |
| return 0; |
| } |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND(show_sr_mpls_policies_command, static)= |
| { |
| .path = "show sr mpls policies", |
| .short_help = "show sr mpls policies", |
| .function = show_sr_mpls_policies_command_fn, |
| }; |
| /* *INDENT-ON* */ |
| |
| /** |
| * @brief Update the Endpoint,Color tuple of an SR policy |
| * |
| * @param bsid is the bindingSID of the SR Policy |
| * @param endpoint represents the IP46 of the endpoint |
| * @param color represents the color (u32) |
| * |
| * To reset to NULL use ~0 as parameters. |
| * |
| * @return 0 if correct, else error |
| */ |
| int |
| sr_mpls_policy_assign_endpoint_color (mpls_label_t bsid, |
| ip46_address_t * endpoint, |
| u8 endpoint_type, u32 color) |
| { |
| mpls_sr_main_t *sm = &sr_mpls_main; |
| mpls_sr_policy_t *sr_policy = 0; |
| uword *endpoint_table, *p, *old_value; |
| |
| ip46_address_t any; |
| any.as_u64[0] = any.as_u64[1] = (u64) ~ 0; |
| |
| if (!sm->sr_policies_index_hash) |
| sm->sr_policies_index_hash = hash_create (0, sizeof (mpls_label_t)); |
| |
| p = hash_get (sm->sr_policies_index_hash, bsid); |
| if (p) |
| sr_policy = pool_elt_at_index (sm->sr_policies, p[0]); |
| else |
| return -1; |
| |
| /* If previous Endpoint, color existed, remove (NH,C) and (ANY,C) */ |
| if (sr_policy->endpoint_type) |
| { |
| endpoint_table = |
| mhash_get (&sm->sr_policies_c2e2eclabel_hash, &sr_policy->color); |
| if (!endpoint_table) |
| return -2; |
| old_value = |
| mhash_get ((mhash_t *) endpoint_table, &sr_policy->endpoint); |
| |
| /* CID 180995 This should never be NULL unless the two hash tables |
| * get out of sync */ |
| ASSERT (old_value != NULL); |
| |
| fib_prefix_t pfx = { 0 }; |
| pfx.fp_proto = FIB_PROTOCOL_MPLS; |
| pfx.fp_len = 21; |
| pfx.fp_label = (u32) * old_value; |
| |
| mpls_eos_bit_t eos; |
| FOR_EACH_MPLS_EOS_BIT (eos) |
| { |
| pfx.fp_eos = eos; |
| fib_table_entry_path_remove (sm->fib_table_EC, |
| &pfx, |
| FIB_SOURCE_SR, |
| DPO_PROTO_MPLS, |
| NULL, |
| ~0, 0, 1, FIB_ROUTE_PATH_FLAG_NONE); |
| } |
| |
| old_value = mhash_get ((mhash_t *) endpoint_table, &any); |
| pfx.fp_label = (u32) * old_value; |
| |
| FOR_EACH_MPLS_EOS_BIT (eos) |
| { |
| pfx.fp_eos = eos; |
| fib_table_entry_path_remove (sm->fib_table_EC, |
| &pfx, |
| FIB_SOURCE_SR, |
| DPO_PROTO_MPLS, |
| NULL, |
| ~0, 0, 1, FIB_ROUTE_PATH_FLAG_NONE); |
| } |
| |
| /* Release the lock on (NH, Color) and (ANY, Color) */ |
| internal_label_unlock (sr_policy->endpoint, sr_policy->color); |
| internal_label_unlock (any, sr_policy->color); |
| |
| /* Reset the values on the SR policy */ |
| sr_policy->endpoint_type = 0; |
| sr_policy->endpoint.as_u64[0] = sr_policy->endpoint.as_u64[1] = |
| (u64) ~ 0; |
| sr_policy->color = (u32) ~ 0; |
| } |
| |
| if (endpoint_type) |
| { |
| sr_policy->endpoint_type = endpoint_type; |
| sr_policy->endpoint.as_u64[0] = endpoint->as_u64[0]; |
| sr_policy->endpoint.as_u64[1] = endpoint->as_u64[1]; |
| sr_policy->color = color; |
| |
| u32 label = find_or_create_internal_label (*endpoint, color); |
| internal_label_lock (*endpoint, sr_policy->color); |
| |
| /* If FIB doesnt exist, create them */ |
| if (sm->fib_table_EC == (u32) ~ 0) |
| { |
| sm->fib_table_EC = fib_table_create_and_lock (FIB_PROTOCOL_MPLS, |
| FIB_SOURCE_SR, |
| "SR-MPLS Traffic Engineering (NextHop,Color)"); |
| |
| fib_table_flush (sm->fib_table_EC, FIB_PROTOCOL_MPLS, |
| FIB_SOURCE_SPECIAL); |
| } |
| |
| fib_prefix_t pfx = { 0 }; |
| pfx.fp_proto = FIB_PROTOCOL_MPLS; |
| pfx.fp_len = 21; |
| |
| fib_route_path_t path = { |
| .frp_proto = DPO_PROTO_MPLS, |
| .frp_sw_if_index = ~0, |
| .frp_fib_index = 0, |
| .frp_weight = 1, |
| .frp_flags = FIB_ROUTE_PATH_FLAG_NONE, |
| .frp_label_stack = 0 |
| }; |
| path.frp_local_label = sr_policy->bsid; |
| |
| //Add the entry to ANY,Color |
| u32 any_label = find_or_create_internal_label (any, color); |
| internal_label_lock (any, sr_policy->color); |
| |
| pfx.fp_eos = MPLS_EOS; |
| path.frp_eos = MPLS_EOS; |
| |
| fib_route_path_t *paths = NULL; |
| vec_add1 (paths, path); |
| |
| pfx.fp_label = label; |
| fib_table_entry_update (sm->fib_table_EC, |
| &pfx, |
| FIB_SOURCE_SR, |
| FIB_ENTRY_FLAG_LOOSE_URPF_EXEMPT, paths); |
| |
| pfx.fp_label = any_label; |
| fib_table_entry_update (sm->fib_table_EC, |
| &pfx, |
| FIB_SOURCE_SR, |
| FIB_ENTRY_FLAG_LOOSE_URPF_EXEMPT, paths); |
| |
| fib_mpls_label_t fml = { |
| .fml_value = MPLS_IETF_IMPLICIT_NULL_LABEL, |
| }; |
| |
| vec_add1 (path.frp_label_stack, fml); |
| pfx.fp_eos = MPLS_NON_EOS; |
| path.frp_eos = MPLS_NON_EOS; |
| |
| paths = NULL; |
| vec_add1 (paths, path); |
| |
| pfx.fp_label = label; |
| fib_table_entry_update (sm->fib_table_EC, |
| &pfx, |
| FIB_SOURCE_SR, |
| FIB_ENTRY_FLAG_LOOSE_URPF_EXEMPT, paths); |
| |
| pfx.fp_label = any_label; |
| fib_table_entry_update (sm->fib_table_EC, |
| &pfx, |
| FIB_SOURCE_SR, |
| FIB_ENTRY_FLAG_LOOSE_URPF_EXEMPT, paths); |
| } |
| return 0; |
| } |
| |
| /** |
| * @brief CLI to modify the Endpoint,Color of an SR policy |
| */ |
| static clib_error_t * |
| cli_sr_mpls_policy_ec_command_fn (vlib_main_t * vm, unformat_input_t * input, |
| vlib_cli_command_t * cmd) |
| { |
| ip46_address_t endpoint; |
| u32 color = (u32) ~ 0; |
| mpls_label_t bsid; |
| u8 endpoint_type = 0; |
| char clear = 0, color_set = 0, bsid_set = 0; |
| |
| memset (&endpoint, 0, sizeof (ip46_address_t)); |
| |
| int rv; |
| while (unformat_check_input (input) != UNFORMAT_END_OF_INPUT) |
| { |
| if (!endpoint_type |
| && unformat (input, "endpoint %U", unformat_ip6_address, |
| &endpoint.ip6)) |
| endpoint_type = SR_STEER_IPV6; |
| else if (!endpoint_type |
| && unformat (input, "endpoint %U", unformat_ip4_address, |
| &endpoint.ip4)) |
| endpoint_type = SR_STEER_IPV4; |
| else if (!color_set && unformat (input, "color %u", &color)) |
| color_set = 1; |
| else if (!bsid_set |
| && unformat (input, "bsid %U", unformat_mpls_unicast_label, |
| &bsid)) |
| bsid_set = 1; |
| else if (!clear && unformat (input, "clear")) |
| clear = 1; |
| else |
| break; |
| } |
| |
| if (!bsid_set) |
| return clib_error_return (0, "No BSID specified"); |
| if (!endpoint_type && !clear) |
| return clib_error_return (0, "No Endpoint specified"); |
| if (!color_set && !clear) |
| return clib_error_return (0, "No Color set"); |
| |
| /* In case its a cleanup */ |
| if (clear) |
| { |
| ip6_address_set_zero (&endpoint.ip6); |
| color = (u32) ~ 0; |
| } |
| rv = |
| sr_mpls_policy_assign_endpoint_color (bsid, &endpoint, endpoint_type, |
| color); |
| |
| if (rv) |
| clib_error_return (0, "Error on Endpoint,Color"); |
| |
| return 0; |
| } |
| |
| /* *INDENT-OFF* */ |
| VLIB_CLI_COMMAND(cli_sr_mpls_policy_ec_command, static)= |
| { |
| .path = "sr mpls policy te", |
| .short_help = "sr mpls policy te bsid xxxxx endpoint x.x.x.x color 12341234", |
| .function = cli_sr_mpls_policy_ec_command_fn, |
| }; |
| /* *INDENT-ON* */ |
| |
| /********************* SR MPLS Policy initialization ***********************/ |
| /** |
| * @brief SR MPLS Policy initialization |
| */ |
| clib_error_t * |
| sr_mpls_policy_rewrite_init (vlib_main_t * vm) |
| { |
| mpls_sr_main_t *sm = &sr_mpls_main; |
| |
| /* Init memory for sr policy keys (bsid <-> ip6_address_t) */ |
| sm->sr_policies_index_hash = NULL; |
| sm->sr_policies_c2e2eclabel_hash.hash = NULL; |
| return 0; |
| } |
| |
| VLIB_INIT_FUNCTION (sr_mpls_policy_rewrite_init); |
| |
| /* |
| * fd.io coding-style-patch-verification: ON |
| * |
| * Local Variables: eval: (c-set-style "gnu") End: |
| */ |