| #!/usr/bin/env python |
| |
| from framework import VppTestCase, VppTestRunner |
| from vpp_ip import VppIpPrefix |
| |
| from vpp_ip_route import VppIpTable |
| |
| from scapy.packet import Raw |
| from scapy.layers.l2 import Ether |
| from scapy.layers.inet import IP, UDP, ICMP |
| from scapy.layers.inet6 import IPv6 |
| |
| from vpp_papi import VppEnum |
| |
| |
| class TestSVS(VppTestCase): |
| """ SVS Test Case """ |
| |
| def setUp(self): |
| super(TestSVS, self).setUp() |
| |
| # create 2 pg interfaces |
| self.create_pg_interfaces(range(4)) |
| |
| table_id = 0 |
| |
| for i in self.pg_interfaces: |
| i.admin_up() |
| |
| if table_id != 0: |
| tbl = VppIpTable(self, table_id) |
| tbl.add_vpp_config() |
| tbl = VppIpTable(self, table_id, is_ip6=1) |
| tbl.add_vpp_config() |
| |
| i.set_table_ip4(table_id) |
| i.set_table_ip6(table_id) |
| i.config_ip4() |
| i.resolve_arp() |
| i.config_ip6() |
| i.resolve_ndp() |
| table_id += 1 |
| |
| def tearDown(self): |
| for i in self.pg_interfaces: |
| i.unconfig_ip4() |
| i.unconfig_ip6() |
| i.ip6_disable() |
| i.set_table_ip4(0) |
| i.set_table_ip6(0) |
| i.admin_down() |
| super(TestSVS, self).tearDown() |
| |
| def test_svs4(self): |
| """ Source VRF Select IP4 """ |
| |
| # |
| # packets destinet out of the 3 non-default table interfaces |
| # |
| pkts_0 = [(Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src="1.1.1.1", dst=self.pg1.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src="2.2.2.2", dst=self.pg2.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src="3.3.3.3", dst=self.pg3.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100))] |
| pkts_1 = [(Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IP(src="1.1.1.1", dst=self.pg1.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IP(src="2.2.2.2", dst=self.pg2.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IP(src="3.3.3.3", dst=self.pg3.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100))] |
| |
| # |
| # before adding the SVS config all these packets are dropped when |
| # ingressing on pg0 since pg0 is in the default table |
| # |
| for p in pkts_0: |
| self.send_and_assert_no_replies(self.pg0, p * 1) |
| |
| # |
| # Add table 1001 & 1002 into which we'll add the routes |
| # determing the source VRF selection |
| # |
| table_ids = [101, 102] |
| |
| for table_id in table_ids: |
| self.vapi.svs_table_add_del( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP4, table_id) |
| |
| # |
| # map X.0.0.0/8 to each SVS table for lookup in table X |
| # |
| for i in range(1, 4): |
| self.vapi.svs_route_add_del( |
| table_id, |
| VppIpPrefix("%d.0.0.0" % i, 8).encode(), |
| i) |
| |
| # |
| # Enable SVS on pg0/pg1 using table 1001/1002 |
| # |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP4, table_ids[0], |
| self.pg0.sw_if_index) |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP4, table_ids[1], |
| self.pg1.sw_if_index) |
| |
| # |
| # now all the packets should be delivered out the respective interface |
| # |
| self.send_and_expect(self.pg0, pkts_0[0] * 65, self.pg1) |
| self.send_and_expect(self.pg0, pkts_0[1] * 65, self.pg2) |
| self.send_and_expect(self.pg0, pkts_0[2] * 65, self.pg3) |
| self.send_and_expect(self.pg1, pkts_1[0] * 65, self.pg1) |
| self.send_and_expect(self.pg1, pkts_1[1] * 65, self.pg2) |
| self.send_and_expect(self.pg1, pkts_1[2] * 65, self.pg3) |
| |
| # |
| # check that if the SVS lookup does not match a route the packet |
| # is forwarded using the interface's routing table |
| # |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IP(src=self.pg0.remote_ip4, dst=self.pg0.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| self.send_and_expect(self.pg0, p * 65, self.pg0) |
| |
| p = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IP(src=self.pg1.remote_ip4, dst=self.pg1.remote_ip4) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| self.send_and_expect(self.pg1, p * 65, self.pg1) |
| |
| # |
| # dump the SVS configs |
| # |
| ss = self.vapi.svs_dump() |
| |
| self.assertEqual(ss[0].table_id, table_ids[0]) |
| self.assertEqual(ss[0].sw_if_index, self.pg0.sw_if_index) |
| self.assertEqual(ss[0].af, VppEnum.vl_api_address_family_t.ADDRESS_IP4) |
| self.assertEqual(ss[1].table_id, table_ids[1]) |
| self.assertEqual(ss[1].sw_if_index, self.pg1.sw_if_index) |
| self.assertEqual(ss[1].af, VppEnum.vl_api_address_family_t.ADDRESS_IP4) |
| |
| # |
| # cleanup |
| # |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP4, |
| table_ids[0], |
| self.pg0.sw_if_index, |
| is_enable=0) |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP4, |
| table_ids[1], |
| self.pg1.sw_if_index, |
| is_enable=0) |
| |
| for table_id in table_ids: |
| for i in range(1, 4): |
| self.vapi.svs_route_add_del( |
| table_id, |
| VppIpPrefix("%d.0.0.0" % i, 8).encode(), |
| 0, is_add=0) |
| self.vapi.svs_table_add_del( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP4, |
| table_id, |
| is_add=0) |
| |
| def test_svs6(self): |
| """ Source VRF Select IP6 """ |
| |
| # |
| # packets destinet out of the 3 non-default table interfaces |
| # |
| pkts_0 = [(Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IPv6(src="2001:1::1", dst=self.pg1.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IPv6(src="2001:2::1", dst=self.pg2.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IPv6(src="2001:3::1", dst=self.pg3.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100))] |
| pkts_1 = [(Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IPv6(src="2001:1::1", dst=self.pg1.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IPv6(src="2001:2::1", dst=self.pg2.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)), |
| (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IPv6(src="2001:3::1", dst=self.pg3.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100))] |
| |
| # |
| # before adding the SVS config all these packets are dropped when |
| # ingressing on pg0 since pg0 is in the default table |
| # |
| for p in pkts_0: |
| self.send_and_assert_no_replies(self.pg0, p * 1) |
| |
| # |
| # Add table 1001 & 1002 into which we'll add the routes |
| # determing the source VRF selection |
| # |
| table_ids = [101, 102] |
| |
| for table_id in table_ids: |
| self.vapi.svs_table_add_del( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP6, table_id) |
| |
| # |
| # map X.0.0.0/8 to each SVS table for lookup in table X |
| # |
| for i in range(1, 4): |
| self.vapi.svs_route_add_del( |
| table_id, |
| VppIpPrefix("2001:%d::" % i, 32).encode(), |
| i) |
| |
| # |
| # Enable SVS on pg0/pg1 using table 1001/1002 |
| # |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP6, |
| table_ids[0], |
| self.pg0.sw_if_index) |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP6, |
| table_ids[1], |
| self.pg1.sw_if_index) |
| |
| # |
| # now all the packets should be delivered out the respective interface |
| # |
| self.send_and_expect(self.pg0, pkts_0[0] * 65, self.pg1) |
| self.send_and_expect(self.pg0, pkts_0[1] * 65, self.pg2) |
| self.send_and_expect(self.pg0, pkts_0[2] * 65, self.pg3) |
| self.send_and_expect(self.pg1, pkts_1[0] * 65, self.pg1) |
| self.send_and_expect(self.pg1, pkts_1[1] * 65, self.pg2) |
| self.send_and_expect(self.pg1, pkts_1[2] * 65, self.pg3) |
| |
| # |
| # check that if the SVS lookup does not match a route the packet |
| # is forwarded using the interface's routing table |
| # |
| p = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) / |
| IPv6(src=self.pg0.remote_ip6, dst=self.pg0.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| self.send_and_expect(self.pg0, p * 65, self.pg0) |
| |
| p = (Ether(dst=self.pg1.local_mac, src=self.pg1.remote_mac) / |
| IPv6(src=self.pg1.remote_ip6, dst=self.pg1.remote_ip6) / |
| UDP(sport=1234, dport=1234) / |
| Raw('\xa5' * 100)) |
| self.send_and_expect(self.pg1, p * 65, self.pg1) |
| |
| # |
| # dump the SVS configs |
| # |
| ss = self.vapi.svs_dump() |
| |
| self.assertEqual(ss[0].table_id, table_ids[0]) |
| self.assertEqual(ss[0].sw_if_index, self.pg0.sw_if_index) |
| self.assertEqual(ss[0].af, VppEnum.vl_api_address_family_t.ADDRESS_IP6) |
| self.assertEqual(ss[1].table_id, table_ids[1]) |
| self.assertEqual(ss[1].sw_if_index, self.pg1.sw_if_index) |
| self.assertEqual(ss[1].af, VppEnum.vl_api_address_family_t.ADDRESS_IP6) |
| |
| # |
| # cleanup |
| # |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP6, |
| table_ids[0], |
| self.pg0.sw_if_index, |
| is_enable=0) |
| self.vapi.svs_enable_disable( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP6, |
| table_ids[1], |
| self.pg1.sw_if_index, |
| is_enable=0) |
| for table_id in table_ids: |
| for i in range(1, 4): |
| self.vapi.svs_route_add_del( |
| table_id, |
| VppIpPrefix("2001:%d::" % i, 32).encode(), |
| 0, is_add=0) |
| self.vapi.svs_table_add_del( |
| VppEnum.vl_api_address_family_t.ADDRESS_IP6, |
| table_id, |
| is_add=0) |
| |
| |
| if __name__ == '__main__': |
| unittest.main(testRunner=VppTestRunner) |