| # Makefile.in generated by automake 1.14.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # Copyright (c) 2015 Cisco and/or its affiliates. |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at: |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| noinst_PROGRAMS = |
| bin_PROGRAMS = |
| subdir = . |
| DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(top_srcdir)/configure $(am__configure_deps) depcomp \ |
| $(nobase_include_HEADERS) compile config.guess config.sub \ |
| install-sh missing ltmain.sh |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_java_home.m4 \ |
| $(top_srcdir)/m4/ax_prog_jar.m4 \ |
| $(top_srcdir)/m4/ax_prog_java.m4 \ |
| $(top_srcdir)/m4/ax_prog_java_works.m4 \ |
| $(top_srcdir)/m4/ax_prog_javac.m4 \ |
| $(top_srcdir)/m4/ax_prog_javac_works.m4 \ |
| $(top_srcdir)/m4/ax_prog_javadoc.m4 \ |
| $(top_srcdir)/m4/ax_prog_javah.m4 $(top_srcdir)/m4/libtool.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ |
| "$(DESTDIR)$(includedir)" |
| LTLIBRARIES = $(lib_LTLIBRARIES) |
| libvppjni_la_DEPENDENCIES = |
| am__dirstamp = $(am__leading_dot)dirstamp |
| am_libvppjni_la_OBJECTS = japi/vppjni.lo japi/vppapi.lo |
| libvppjni_la_OBJECTS = $(am_libvppjni_la_OBJECTS) |
| AM_V_lt = $(am__v_lt_@AM_V@) |
| am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) |
| am__v_lt_0 = --silent |
| am__v_lt_1 = |
| libvppjni_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ |
| $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ |
| $(libvppjni_la_LDFLAGS) $(LDFLAGS) -o $@ |
| PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| DEFAULT_INCLUDES = -I.@am__isrc@ |
| depcomp = $(SHELL) $(top_srcdir)/depcomp |
| am__depfiles_maybe = depfiles |
| am__mv = mv -f |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ |
| $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ |
| $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ |
| $(AM_CFLAGS) $(CFLAGS) |
| AM_V_CC = $(am__v_CC_@AM_V@) |
| am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) |
| am__v_CC_0 = @echo " CC " $@; |
| am__v_CC_1 = |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ |
| $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ |
| $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
| AM_V_CCLD = $(am__v_CCLD_@AM_V@) |
| am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) |
| am__v_CCLD_0 = @echo " CCLD " $@; |
| am__v_CCLD_1 = |
| SOURCES = $(libvppjni_la_SOURCES) |
| DIST_SOURCES = $(libvppjni_la_SOURCES) |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| HEADERS = $(nobase_include_HEADERS) |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| CSCOPE = cscope |
| AM_RECURSIVE_TARGETS = cscope |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| DIST_ARCHIVES = $(distdir).tar.gz |
| GZIP_ENV = --best |
| DIST_TARGETS = dist-gzip |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCAS = @CCAS@ |
| CCASDEPMODE = @CCASDEPMODE@ |
| CCASFLAGS = @CCASFLAGS@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GREP = @GREP@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| JAR = @JAR@ |
| JAVA = @JAVA@ |
| JAVAC = @JAVAC@ |
| JAVADOC = @JAVADOC@ |
| JAVAH = @JAVAH@ |
| JAVA_PATH_NAME = @JAVA_PATH_NAME@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| UUDECODE = @UUDECODE@ |
| VERSION = @VERSION@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| AUTOMAKE_OPTIONS = foreign subdir-objects |
| ACLOCAL_AMFLAGS = -I m4 |
| AM_CFLAGS = -Wall |
| BUILT_SOURCES = japi/org_openvpp_vppjapi_vppConn.h japi/vppapi.c |
| CLEANFILES = |
| lib_LTLIBRARIES = libvppjni.la |
| nobase_include_HEADERS = \ |
| japi/org_openvpp_vppjapi_vppApi.h \ |
| japi/org_openvpp_vppjapi_vppConn.h |
| |
| libvppjni_la_SOURCES = japi/vppjni.c japi/vppapi.c |
| libvppjni_la_LIBADD = -lvlibmemoryclient -lvlibapi -lsvm -lvppinfra \ |
| -lpthread -lm -lrt |
| |
| libvppjni_la_LDFLAGS = -module |
| jarfile = vppjapi-$(PACKAGE_VERSION).jar |
| packagedir = org/openvpp/vppjapi |
| JAVAROOT = . |
| demo = japi/test/demo.class |
| all: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .c .lo .o .obj |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| install-libLTLIBRARIES: $(lib_LTLIBRARIES) |
| @$(NORMAL_INSTALL) |
| @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ |
| list2=; for p in $$list; do \ |
| if test -f $$p; then \ |
| list2="$$list2 $$p"; \ |
| else :; fi; \ |
| done; \ |
| test -z "$$list2" || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ |
| } |
| |
| uninstall-libLTLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ |
| done |
| |
| clean-libLTLIBRARIES: |
| -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) |
| @list='$(lib_LTLIBRARIES)'; \ |
| locs=`for p in $$list; do echo $$p; done | \ |
| sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ |
| sort -u`; \ |
| test -z "$$locs" || { \ |
| echo rm -f $${locs}; \ |
| rm -f $${locs}; \ |
| } |
| japi/$(am__dirstamp): |
| @$(MKDIR_P) japi |
| @: > japi/$(am__dirstamp) |
| japi/$(DEPDIR)/$(am__dirstamp): |
| @$(MKDIR_P) japi/$(DEPDIR) |
| @: > japi/$(DEPDIR)/$(am__dirstamp) |
| japi/vppjni.lo: japi/$(am__dirstamp) japi/$(DEPDIR)/$(am__dirstamp) |
| japi/vppapi.lo: japi/$(am__dirstamp) japi/$(DEPDIR)/$(am__dirstamp) |
| |
| libvppjni.la: $(libvppjni_la_OBJECTS) $(libvppjni_la_DEPENDENCIES) $(EXTRA_libvppjni_la_DEPENDENCIES) |
| $(AM_V_CCLD)$(libvppjni_la_LINK) -rpath $(libdir) $(libvppjni_la_OBJECTS) $(libvppjni_la_LIBADD) $(LIBS) |
| install-binPROGRAMS: $(bin_PROGRAMS) |
| @$(NORMAL_INSTALL) |
| @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed 's/$(EXEEXT)$$//' | \ |
| while read p p1; do if test -f $$p \ |
| || test -f $$p1 \ |
| ; then echo "$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n;h' \ |
| -e 's|.*|.|' \ |
| -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ |
| sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) files[d] = files[d] " " $$1; \ |
| else { print "f", $$3 "/" $$4, $$1; } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ |
| $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-binPROGRAMS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ |
| -e 's/$$/$(EXEEXT)/' \ |
| `; \ |
| test -n "$$list" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(bindir)" && rm -f $$files |
| |
| clean-binPROGRAMS: |
| @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list || exit $$?; \ |
| test -n "$(EXEEXT)" || exit 0; \ |
| list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list |
| |
| clean-noinstPROGRAMS: |
| @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list || exit $$?; \ |
| test -n "$(EXEEXT)" || exit 0; \ |
| list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| -rm -f japi/*.$(OBJEXT) |
| -rm -f japi/*.lo |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| @AMDEP_TRUE@@am__include@ @am__quote@japi/$(DEPDIR)/vppapi.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@japi/$(DEPDIR)/vppjni.Plo@am__quote@ |
| |
| .c.o: |
| @am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ |
| @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ |
| @am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< |
| |
| .c.obj: |
| @am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ |
| @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ |
| @am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` |
| |
| .c.lo: |
| @am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ |
| @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ |
| @am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| -rm -rf japi/.libs japi/_libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| install-nobase_includeHEADERS: $(nobase_include_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ |
| fi; \ |
| $(am__nobase_list) | while read dir files; do \ |
| xfiles=; for file in $$files; do \ |
| if test -f "$$file"; then xfiles="$$xfiles $$file"; \ |
| else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ |
| test -z "$$xfiles" || { \ |
| test "x$$dir" = x. || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \ |
| echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \ |
| $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \ |
| done |
| |
| uninstall-nobase_includeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ |
| dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-am |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-am |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscope: cscope.files |
| test ! -s cscope.files \ |
| || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| clean-cscope: |
| -rm -f cscope.files |
| cscope.files: clean-cscope cscopelist |
| cscopelist: cscopelist-am |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| dist-tarZ: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| dist-shar: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build \ |
| && ../configure \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| --srcdir=.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-am |
| all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS) all-local |
| install-binPROGRAMS: install-libLTLIBRARIES |
| |
| installdirs: |
| for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -rm -f japi/$(DEPDIR)/$(am__dirstamp) |
| -rm -f japi/$(am__dirstamp) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| clean: clean-am |
| |
| clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \ |
| clean-libtool clean-noinstPROGRAMS mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf japi/$(DEPDIR) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-libtool distclean-tags |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: install-nobase_includeHEADERS |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: install-binPROGRAMS install-libLTLIBRARIES |
| |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -rf japi/$(DEPDIR) |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: uninstall-binPROGRAMS uninstall-libLTLIBRARIES \ |
| uninstall-nobase_includeHEADERS |
| |
| .MAKE: all check install install-am install-strip |
| |
| .PHONY: CTAGS GTAGS TAGS all all-am all-local am--refresh check \ |
| check-am clean clean-binPROGRAMS clean-cscope clean-generic \ |
| clean-libLTLIBRARIES clean-libtool clean-noinstPROGRAMS cscope \ |
| cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ |
| dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ |
| distcheck distclean distclean-compile distclean-generic \ |
| distclean-libtool distclean-tags distcleancheck distdir \ |
| distuninstallcheck dvi dvi-am html html-am info info-am \ |
| install install-am install-binPROGRAMS install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-libLTLIBRARIES install-man \ |
| install-nobase_includeHEADERS install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip installcheck \ |
| installcheck-am installdirs maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \ |
| uninstall-libLTLIBRARIES uninstall-nobase_includeHEADERS |
| |
| |
| $(jarfile): libvppjni.la |
| cd .libs ; $(JAR) cf $(JARFLAGS) ../$@ libvppjni.so.0.0.0 ../$(packagedir)/*.class ; cd .. |
| |
| japi/org_openvpp_vppjapi_vppConn.h: \ |
| japi/org/openvpp/vppjapi/vppVersion.java \ |
| japi/org/openvpp/vppjapi/vppInterfaceCounters.java \ |
| japi/org/openvpp/vppjapi/vppBridgeDomainDetails.java \ |
| japi/org/openvpp/vppjapi/vppBridgeDomainInterfaceDetails.java \ |
| japi/org/openvpp/vppjapi/vppL2Fib.java \ |
| japi/org/openvpp/vppjapi/vppConn.java \ |
| ../vpp/api/vpe.api.h |
| $(JAVAC) -classpath . -d . @srcdir@/japi/org/openvpp/vppjapi/vppVersion.java ;\ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppVersion ; \ |
| $(JAVAC) -classpath . -d . @srcdir@/japi/org/openvpp/vppjapi/vppInterfaceCounters.java ;\ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppInterfaceCounters ; \ |
| $(JAVAC) -classpath . -d . @srcdir@/japi/org/openvpp/vppjapi/vppBridgeDomainInterfaceDetails.java ;\ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppBridgeDomainInterfaceDetails ; \ |
| $(JAVAC) -classpath . -d . @srcdir@/japi/org/openvpp/vppjapi/vppBridgeDomainDetails.java ;\ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppBridgeDomainDetails ; \ |
| $(JAVAC) -classpath . -d . @srcdir@/japi/org/openvpp/vppjapi/vppL2Fib.java ;\ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppL2Fib ; \ |
| $(JAVAC) -classpath . -d . @srcdir@/japi/org/openvpp/vppjapi/vppConn.java ; \ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppConn ; |
| |
| japi/vppapi.c: japi/org_openvpp_vppjapi_vppConn.h japi/org/openvpp/vppjapi/vppApiCallbacks.java |
| pushd .. ; dir=`pwd` ; popd ; \ |
| instdir=`echo $${dir} | sed -e 's:build-root/build:build-root/install:'` ; \ |
| vppapigen --input $${instdir}/vpp/api/vpe.api --jni japi/vppapi.c --app vpe ; \ |
| vppapigen --input $${instdir}/vpp/api/vpe.api --java japi/vppApi.java --app vpe ; \ |
| $(JAVAC) -classpath . -d . japi/vppApi.java ; \ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppApi ; \ |
| $(JAVAC) -classpath . -d . @srcdir@/japi/org/openvpp/vppjapi/vppApiCallbacks.java ; \ |
| $(JAVAH) -classpath . -d japi org.openvpp.vppjapi.vppApiCallbacks ; |
| $(demo): $(jarfile) |
| $(JAVAC) -cp $(jarfile) -d $(JAVAROOT) @srcdir@/japi/test/demo.java |
| |
| all-local: $(jarfile) $(demo) |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |