blob: 4d540220a35e21fb221eda106ce58c4755a83ec7 [file] [log] [blame]
/*
* l2_bd.c : layer 2 bridge domain
*
* Copyright (c) 2013 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <vlib/vlib.h>
#include <vnet/vnet.h>
#include <vlib/cli.h>
#include <vnet/ethernet/ethernet.h>
#include <vnet/ip/format.h>
#include <vnet/l2/l2_input.h>
#include <vnet/l2/feat_bitmap.h>
#include <vnet/l2/l2_bd.h>
#include <vnet/l2/l2_learn.h>
#include <vnet/l2/l2_fib.h>
#include <vnet/l2/l2_vtr.h>
#include <vnet/ip/ip4_packet.h>
#include <vnet/ip/ip6_packet.h>
#include <vppinfra/error.h>
#include <vppinfra/hash.h>
#include <vppinfra/vec.h>
/**
* @file
* @brief Ethernet Bridge Domain.
*
* Code in this file manages Layer 2 bridge domains.
*
*/
bd_main_t bd_main;
/**
Init bridge domain if not done already.
For feature bitmap, set all bits except ARP termination
*/
void
bd_validate (l2_bridge_domain_t * bd_config)
{
if (bd_is_valid (bd_config))
return;
bd_config->feature_bitmap = ~L2INPUT_FEAT_ARP_TERM;
bd_config->bvi_sw_if_index = ~0;
bd_config->members = 0;
bd_config->flood_count = 0;
bd_config->tun_master_count = 0;
bd_config->tun_normal_count = 0;
bd_config->mac_by_ip4 = 0;
bd_config->mac_by_ip6 = hash_create_mem (0, sizeof (ip6_address_t),
sizeof (uword));
}
u32
bd_find_index (bd_main_t * bdm, u32 bd_id)
{
u32 *p = (u32 *) hash_get (bdm->bd_index_by_bd_id, bd_id);
if (!p)
return ~0;
return p[0];
}
u32
bd_add_bd_index (bd_main_t * bdm, u32 bd_id)
{
ASSERT (!hash_get (bdm->bd_index_by_bd_id, bd_id));
u32 rv = clib_bitmap_first_clear (bdm->bd_index_bitmap);
/* mark this index taken */
bdm->bd_index_bitmap = clib_bitmap_set (bdm->bd_index_bitmap, rv, 1);
hash_set (bdm->bd_index_by_bd_id, bd_id, rv);
vec_validate (l2input_main.bd_configs, rv);
l2input_main.bd_configs[rv].bd_id = bd_id;
return rv;
}
static int
bd_delete (bd_main_t * bdm, u32 bd_index)
{
l2_bridge_domain_t *bd = &l2input_main.bd_configs[bd_index];
u32 bd_id = bd->bd_id;
l2fib_flush_bd_mac (vlib_get_main (), bd_index);
hash_unset (bdm->bd_index_by_bd_id, bd_id);
/* mark this index clear */
bdm->bd_index_bitmap = clib_bitmap_set (bdm->bd_index_bitmap, bd_index, 0);
/* clear BD config for reuse: bd_id to -1 and clear feature_bitmap */
bd->bd_id = ~0;
bd->feature_bitmap = 0;
/* free memory used by BD and flush non-static MACs in BD */
vec_free (bd->members);
hash_free (bd->mac_by_ip4);
hash_free (bd->mac_by_ip6);
return 0;
}
static void
update_flood_count (l2_bridge_domain_t * bd_config)
{
bd_config->flood_count = vec_len (bd_config->members) -
(bd_config->tun_master_count ? bd_config->tun_normal_count : 0);
}
void
bd_add_member (l2_bridge_domain_t * bd_config, l2_flood_member_t * member)
{
u32 ix;
vnet_sw_interface_t *sw_if = vnet_get_sw_interface
(vnet_get_main (), member->sw_if_index);
/*
* Add one element to the vector
* vector is ordered [ bvi, normal/tun_masters..., tun_normals... ]
* When flooding, the bvi interface (if present) must be the last member
* processed due to how BVI processing can change the packet. To enable
* this order, we make the bvi interface the first in the vector and
* flooding walks the vector in reverse.
*/
switch (sw_if->flood_class)
{
case VNET_FLOOD_CLASS_TUNNEL_MASTER:
bd_config->tun_master_count++;
/* Fall through */
default:
/* Fall through */
case VNET_FLOOD_CLASS_NORMAL:
ix = (member->flags & L2_FLOOD_MEMBER_BVI) ? 0 :
vec_len (bd_config->members) - bd_config->tun_normal_count;
break;
case VNET_FLOOD_CLASS_TUNNEL_NORMAL:
ix = vec_len (bd_config->members);
bd_config->tun_normal_count++;
break;
}
vec_insert_elts (bd_config->members, member, 1, ix);
update_flood_count (bd_config);
}
#define BD_REMOVE_ERROR_OK 0
#define BD_REMOVE_ERROR_NOT_FOUND 1
u32
bd_remove_member (l2_bridge_domain_t * bd_config, u32 sw_if_index)
{
u32 ix;
/* Find and delete the member */
vec_foreach_index (ix, bd_config->members)
{
l2_flood_member_t *m = vec_elt_at_index (bd_config->members, ix);
if (m->sw_if_index == sw_if_index)
{
vnet_sw_interface_t *sw_if = vnet_get_sw_interface
(vnet_get_main (), sw_if_index);
if (sw_if->flood_class != VNET_FLOOD_CLASS_NORMAL)
{
if (sw_if->flood_class == VNET_FLOOD_CLASS_TUNNEL_MASTER)
bd_config->tun_master_count--;
else if (sw_if->flood_class == VNET_FLOOD_CLASS_TUNNEL_NORMAL)
bd_config->tun_normal_count--;
}
vec_delete (bd_config->members, 1, ix);
update_flood_count (bd_config);
return BD_REMOVE_ERROR_OK;
}
}
return BD_REMOVE_ERROR_NOT_FOUND;
}
clib_error_t *
l2bd_init (vlib_main_t * vm)
{
bd_main_t *bdm = &bd_main;
bdm->bd_index_by_bd_id = hash_create (0, sizeof (uword));
/*
* create a dummy bd with bd_id of 0 and bd_index of 0 with feature set
* to packet drop only. Thus, packets received from any L2 interface with
* uninitialized bd_index of 0 can be dropped safely.
*/
u32 bd_index = bd_add_bd_index (bdm, 0);
ASSERT (bd_index == 0);
l2input_main.bd_configs[0].feature_bitmap = L2INPUT_FEAT_DROP;
bdm->vlib_main = vm;
return 0;
}
VLIB_INIT_FUNCTION (l2bd_init);
/**
Set the learn/forward/flood flags for the bridge domain.
Return 0 if ok, non-zero if for an error.
*/
u32
bd_set_flags (vlib_main_t * vm, u32 bd_index, u32 flags, u32 enable)
{
l2_bridge_domain_t *bd_config = l2input_bd_config (bd_index);
bd_validate (bd_config);
u32 feature_bitmap = 0;
if (flags & L2_LEARN)
{
feature_bitmap |= L2INPUT_FEAT_LEARN;
}
if (flags & L2_FWD)
{
feature_bitmap |= L2INPUT_FEAT_FWD;
}
if (flags & L2_FLOOD)
{
feature_bitmap |= L2INPUT_FEAT_FLOOD;
}
if (flags & L2_UU_FLOOD)
{
feature_bitmap |= L2INPUT_FEAT_UU_FLOOD;
}
if (flags & L2_ARP_TERM)
{
feature_bitmap |= L2INPUT_FEAT_ARP_TERM;
}
if (enable)
{
bd_config->feature_bitmap |= feature_bitmap;
}
else
{
bd_config->feature_bitmap &= ~feature_bitmap;
}
return 0;
}
/**
Set the mac age for the bridge domain.
*/
void
bd_set_mac_age (vlib_main_t * vm, u32 bd_index, u8 age)
{
l2_bridge_domain_t *bd_config;
int enable = 0;
vec_validate (l2input_main.bd_configs, bd_index);
bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index);
bd_config->mac_age = age;
/* check if there is at least one bd with mac aging enabled */
vec_foreach (bd_config, l2input_main.bd_configs)
enable |= bd_config->bd_id != ~0 && bd_config->mac_age != 0;
vlib_process_signal_event (vm, l2fib_mac_age_scanner_process_node.index,
enable ? L2_MAC_AGE_PROCESS_EVENT_START :
L2_MAC_AGE_PROCESS_EVENT_STOP, 0);
}
/**
Set bridge-domain learn enable/disable.
The CLI format is:
set bridge-domain learn <bd_id> [disable]
*/
static clib_error_t *
bd_learn (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u32 enable;
uword *p;
if (!unformat (input, "%d", &bd_id))
{
error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
format_unformat_error, input);
goto done;
}
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p == 0)
return clib_error_return (0, "No such bridge domain %d", bd_id);
bd_index = p[0];
enable = 1;
if (unformat (input, "disable"))
{
enable = 0;
}
/* set the bridge domain flag */
if (bd_set_flags (vm, bd_index, L2_LEARN, enable))
{
error =
clib_error_return (0, "bridge-domain id %d out of range", bd_index);
goto done;
}
done:
return error;
}
/*?
* Layer 2 learning can be enabled and disabled on each
* interface and on each bridge-domain. Use this command to
* manage bridge-domains. It is enabled by default.
*
* @cliexpar
* Example of how to enable learning (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain learn 200}
* Example of how to disable learning (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain learn 200 disable}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_learn_cli, static) = {
.path = "set bridge-domain learn",
.short_help = "set bridge-domain learn <bridge-domain-id> [disable]",
.function = bd_learn,
};
/* *INDENT-ON* */
/**
Set bridge-domain forward enable/disable.
The CLI format is:
set bridge-domain forward <bd_index> [disable]
*/
static clib_error_t *
bd_fwd (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
{
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u32 enable;
uword *p;
if (!unformat (input, "%d", &bd_id))
{
error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
format_unformat_error, input);
goto done;
}
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p == 0)
return clib_error_return (0, "No such bridge domain %d", bd_id);
bd_index = p[0];
enable = 1;
if (unformat (input, "disable"))
{
enable = 0;
}
/* set the bridge domain flag */
if (bd_set_flags (vm, bd_index, L2_FWD, enable))
{
error =
clib_error_return (0, "bridge-domain id %d out of range", bd_index);
goto done;
}
done:
return error;
}
/*?
* Layer 2 unicast forwarding can be enabled and disabled on each
* interface and on each bridge-domain. Use this command to
* manage bridge-domains. It is enabled by default.
*
* @cliexpar
* Example of how to enable forwarding (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain forward 200}
* Example of how to disable forwarding (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain forward 200 disable}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_fwd_cli, static) = {
.path = "set bridge-domain forward",
.short_help = "set bridge-domain forward <bridge-domain-id> [disable]",
.function = bd_fwd,
};
/* *INDENT-ON* */
/**
Set bridge-domain flood enable/disable.
The CLI format is:
set bridge-domain flood <bd_index> [disable]
*/
static clib_error_t *
bd_flood (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u32 enable;
uword *p;
if (!unformat (input, "%d", &bd_id))
{
error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
format_unformat_error, input);
goto done;
}
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p == 0)
return clib_error_return (0, "No such bridge domain %d", bd_id);
bd_index = p[0];
enable = 1;
if (unformat (input, "disable"))
{
enable = 0;
}
/* set the bridge domain flag */
if (bd_set_flags (vm, bd_index, L2_FLOOD, enable))
{
error =
clib_error_return (0, "bridge-domain id %d out of range", bd_index);
goto done;
}
done:
return error;
}
/*?
* Layer 2 flooding can be enabled and disabled on each
* interface and on each bridge-domain. Use this command to
* manage bridge-domains. It is enabled by default.
*
* @cliexpar
* Example of how to enable flooding (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain flood 200}
* Example of how to disable flooding (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain flood 200 disable}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_flood_cli, static) = {
.path = "set bridge-domain flood",
.short_help = "set bridge-domain flood <bridge-domain-id> [disable]",
.function = bd_flood,
};
/* *INDENT-ON* */
/**
Set bridge-domain unkown-unicast flood enable/disable.
The CLI format is:
set bridge-domain uu-flood <bd_index> [disable]
*/
static clib_error_t *
bd_uu_flood (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u32 enable;
uword *p;
if (!unformat (input, "%d", &bd_id))
{
error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
format_unformat_error, input);
goto done;
}
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p == 0)
return clib_error_return (0, "No such bridge domain %d", bd_id);
bd_index = p[0];
enable = 1;
if (unformat (input, "disable"))
{
enable = 0;
}
/* set the bridge domain flag */
if (bd_set_flags (vm, bd_index, L2_UU_FLOOD, enable))
{
error =
clib_error_return (0, "bridge-domain id %d out of range", bd_index);
goto done;
}
done:
return error;
}
/*?
* Layer 2 unknown-unicast flooding can be enabled and disabled on each
* bridge-domain. It is enabled by default.
*
* @cliexpar
* Example of how to enable unknown-unicast flooding (where 200 is the
* bridge-domain-id):
* @cliexcmd{set bridge-domain uu-flood 200}
* Example of how to disable unknown-unicast flooding (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain uu-flood 200 disable}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_uu_flood_cli, static) = {
.path = "set bridge-domain uu-flood",
.short_help = "set bridge-domain uu-flood <bridge-domain-id> [disable]",
.function = bd_uu_flood,
};
/* *INDENT-ON* */
/**
Set bridge-domain arp term enable/disable.
The CLI format is:
set bridge-domain arp term <bridge-domain-id> [disable]
*/
static clib_error_t *
bd_arp_term (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u32 enable;
uword *p;
if (!unformat (input, "%d", &bd_id))
{
error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
format_unformat_error, input);
goto done;
}
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p)
bd_index = *p;
else
return clib_error_return (0, "No such bridge domain %d", bd_id);
enable = 1;
if (unformat (input, "disable"))
enable = 0;
/* set the bridge domain flag */
if (bd_set_flags (vm, bd_index, L2_ARP_TERM, enable))
{
error =
clib_error_return (0, "bridge-domain id %d out of range", bd_index);
goto done;
}
done:
return error;
}
static clib_error_t *
bd_mac_age (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u32 age;
uword *p;
if (!unformat (input, "%d", &bd_id))
{
error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
format_unformat_error, input);
goto done;
}
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p == 0)
return clib_error_return (0, "No such bridge domain %d", bd_id);
bd_index = p[0];
if (!unformat (input, "%u", &age))
{
error =
clib_error_return (0, "expecting ageing time in minutes but got `%U'",
format_unformat_error, input);
goto done;
}
/* set the bridge domain flag */
if (age > 255)
{
error =
clib_error_return (0, "mac aging time cannot be bigger than 255");
goto done;
}
bd_set_mac_age (vm, bd_index, (u8) age);
done:
return error;
}
/*?
* Layer 2 mac aging can be enabled and disabled on each
* bridge-domain. Use this command to set or disable mac aging
* on specific bridge-domains. It is disabled by default.
*
* @cliexpar
* Example of how to set mac aging (where 200 is the bridge-domain-id and
* 5 is aging time in minutes):
* @cliexcmd{set bridge-domain mac-age 200 5}
* Example of how to disable mac aging (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain flood 200 0}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_mac_age_cli, static) = {
.path = "set bridge-domain mac-age",
.short_help = "set bridge-domain mac-age <bridge-domain-id> <mins>",
.function = bd_mac_age,
};
/* *INDENT-ON* */
/*?
* Modify whether or not an existing bridge-domain should terminate and respond
* to ARP Requests. ARP Termination is disabled by default.
*
* @cliexpar
* Example of how to enable ARP termination (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain arp term 200}
* Example of how to disable ARP termination (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain arp term 200 disable}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_arp_term_cli, static) = {
.path = "set bridge-domain arp term",
.short_help = "set bridge-domain arp term <bridge-domain-id> [disable]",
.function = bd_arp_term,
};
/* *INDENT-ON* */
/**
* Add/delete IP address to MAC address mapping.
*
* The clib hash implementation stores uword entries in the hash table.
* The hash table mac_by_ip4 is keyed via IP4 address and store the
* 6-byte MAC address directly in the hash table entry uword.
*
* @warning This only works for 64-bit processor with 8-byte uword;
* which means this code *WILL NOT WORK* for a 32-bit prcessor with
* 4-byte uword.
*/
u32
bd_add_del_ip_mac (u32 bd_index,
u8 * ip_addr, u8 * mac_addr, u8 is_ip6, u8 is_add)
{
l2_bridge_domain_t *bd_cfg = l2input_bd_config (bd_index);
u64 new_mac = *(u64 *) mac_addr;
u64 *old_mac;
u16 *mac16 = (u16 *) & new_mac;
ASSERT (sizeof (uword) == sizeof (u64)); /* make sure uword is 8 bytes */
ASSERT (bd_is_valid (bd_cfg));
mac16[3] = 0; /* Clear last 2 unsed bytes of the 8-byte MAC address */
if (is_ip6)
{
ip6_address_t *ip6_addr_key;
hash_pair_t *hp;
old_mac = (u64 *) hash_get_mem (bd_cfg->mac_by_ip6, ip_addr);
if (is_add)
{
if (old_mac == 0)
{ /* new entry - allocate and craete ip6 address key */
ip6_addr_key = clib_mem_alloc (sizeof (ip6_address_t));
clib_memcpy (ip6_addr_key, ip_addr, sizeof (ip6_address_t));
}
else if (*old_mac == new_mac)
{ /* same mac entry already exist for ip6 address */
return 0;
}
else
{ /* updat mac for ip6 address */
hp = hash_get_pair (bd_cfg->mac_by_ip6, ip_addr);
ip6_addr_key = (ip6_address_t *) hp->key;
}
hash_set_mem (bd_cfg->mac_by_ip6, ip6_addr_key, new_mac);
}
else
{
if (old_mac && (*old_mac == new_mac))
{
hp = hash_get_pair (bd_cfg->mac_by_ip6, ip_addr);
ip6_addr_key = (ip6_address_t *) hp->key;
hash_unset_mem (bd_cfg->mac_by_ip6, ip_addr);
clib_mem_free (ip6_addr_key);
}
else
return 1;
}
}
else
{
ip4_address_t ip4_addr = *(ip4_address_t *) ip_addr;
old_mac = (u64 *) hash_get (bd_cfg->mac_by_ip4, ip4_addr.as_u32);
if (is_add)
{
if (old_mac && (*old_mac == new_mac))
return 0; /* mac entry already exist */
hash_set (bd_cfg->mac_by_ip4, ip4_addr.as_u32, new_mac);
}
else
{
if (old_mac && (*old_mac == new_mac))
hash_unset (bd_cfg->mac_by_ip4, ip4_addr.as_u32);
else
return 1;
}
}
return 0;
}
/**
Set bridge-domain arp entry add/delete.
The CLI format is:
set bridge-domain arp entry <bridge-domain-id> <ip-addr> <mac-addr> [del]
*/
static clib_error_t *
bd_arp_entry (vlib_main_t * vm,
unformat_input_t * input, vlib_cli_command_t * cmd)
{
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index, bd_id;
u8 is_add = 1;
u8 is_ip6 = 0;
u8 ip_addr[16];
u8 mac_addr[6];
uword *p;
if (!unformat (input, "%d", &bd_id))
{
error = clib_error_return (0, "expecting bridge-domain id but got `%U'",
format_unformat_error, input);
goto done;
}
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p)
bd_index = *p;
else
return clib_error_return (0, "No such bridge domain %d", bd_id);
if (unformat (input, "%U", unformat_ip4_address, ip_addr))
{
is_ip6 = 0;
}
else if (unformat (input, "%U", unformat_ip6_address, ip_addr))
{
is_ip6 = 1;
}
else
{
error = clib_error_return (0, "expecting IP address but got `%U'",
format_unformat_error, input);
goto done;
}
if (!unformat (input, "%U", unformat_ethernet_address, mac_addr))
{
error = clib_error_return (0, "expecting MAC address but got `%U'",
format_unformat_error, input);
goto done;
}
if (unformat (input, "del"))
{
is_add = 0;
}
/* set the bridge domain flagAdd IP-MAC entry into bridge domain */
if (bd_add_del_ip_mac (bd_index, ip_addr, mac_addr, is_ip6, is_add))
{
error = clib_error_return (0, "MAC %s for IP %U and MAC %U failed",
is_add ? "add" : "del",
is_ip6 ?
format_ip4_address : format_ip6_address,
ip_addr, format_ethernet_address, mac_addr);
}
done:
return error;
}
/*?
* Add an ARP entry to an existing bridge-domain.
*
* @cliexpar
* Example of how to add an ARP entry (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain arp entry 200 192.168.72.45 52:54:00:3b:83:1a}
* Example of how to delete an ARP entry (where 200 is the bridge-domain-id):
* @cliexcmd{set bridge-domain arp entry 200 192.168.72.45 52:54:00:3b:83:1a del}
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_arp_entry_cli, static) = {
.path = "set bridge-domain arp entry",
.short_help = "set bridge-domain arp entry <bridge-domain-id> <ip-addr> <mac-addr> [del]",
.function = bd_arp_entry,
};
/* *INDENT-ON* */
u8 *
format_vtr (u8 * s, va_list * args)
{
u32 vtr_op = va_arg (*args, u32);
u32 dot1q = va_arg (*args, u32);
u32 tag1 = va_arg (*args, u32);
u32 tag2 = va_arg (*args, u32);
switch (vtr_op)
{
case L2_VTR_DISABLED:
return format (s, "none");
case L2_VTR_PUSH_1:
return format (s, "push-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1);
case L2_VTR_PUSH_2:
return format (s, "push-2 %s %d %d", dot1q ? "dot1q" : "dot1ad", tag1,
tag2);
case L2_VTR_POP_1:
return format (s, "pop-1");
case L2_VTR_POP_2:
return format (s, "pop-2");
case L2_VTR_TRANSLATE_1_1:
return format (s, "trans-1-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1);
case L2_VTR_TRANSLATE_1_2:
return format (s, "trans-1-2 %s %d %d", dot1q ? "dot1q" : "dot1ad",
tag1, tag2);
case L2_VTR_TRANSLATE_2_1:
return format (s, "trans-2-1 %s %d", dot1q ? "dot1q" : "dot1ad", tag1);
case L2_VTR_TRANSLATE_2_2:
return format (s, "trans-2-2 %s %d %d", dot1q ? "dot1q" : "dot1ad",
tag1, tag2);
default:
return format (s, "none");
}
}
/**
Show bridge-domain state.
The CLI format is:
show bridge-domain [<bd_index>]
*/
static clib_error_t *
bd_show (vlib_main_t * vm, unformat_input_t * input, vlib_cli_command_t * cmd)
{
vnet_main_t *vnm = vnet_get_main ();
bd_main_t *bdm = &bd_main;
clib_error_t *error = 0;
u32 bd_index = ~0;
l2_bridge_domain_t *bd_config;
u32 start, end;
u32 detail = 0;
u32 intf = 0;
u32 arp = 0;
u32 bd_id = ~0;
uword *p;
start = 1;
end = vec_len (l2input_main.bd_configs);
if (unformat (input, "%d", &bd_id))
{
if (unformat (input, "detail"))
detail = 1;
else if (unformat (input, "det"))
detail = 1;
if (unformat (input, "int"))
intf = 1;
if (unformat (input, "arp"))
arp = 1;
if (bd_id == 0)
return clib_error_return (0,
"No operations on the default bridge domain are supported");
p = hash_get (bdm->bd_index_by_bd_id, bd_id);
if (p)
bd_index = *p;
else
return clib_error_return (0, "No such bridge domain %d", bd_id);
vec_validate (l2input_main.bd_configs, bd_index);
bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index);
if (bd_is_valid (bd_config))
{
start = bd_index;
end = start + 1;
}
else
{
vlib_cli_output (vm, "bridge-domain %d not in use", bd_id);
goto done;
}
}
/* Show all bridge-domains that have been initialized */
u32 printed = 0;
u8 *as = 0;
for (bd_index = start; bd_index < end; bd_index++)
{
bd_config = vec_elt_at_index (l2input_main.bd_configs, bd_index);
if (bd_is_valid (bd_config))
{
if (!printed)
{
printed = 1;
vlib_cli_output (vm,
"%=5s %=7s %=4s %=9s %=9s %=9s %=9s %=9s %=9s %=9s",
"ID", "Index", "BSN", "Age(min)", "Learning",
"U-Forwrd", "UU-Flood", "Flooding", "ARP-Term",
"BVI-Intf");
}
if (bd_config->mac_age)
as = format (as, "%d", bd_config->mac_age);
else
as = format (as, "off");
vlib_cli_output (vm,
"%=5d %=7d %=4d %=9v %=9s %=9s %=9s %=9s %=9s %=9U",
bd_config->bd_id, bd_index, bd_config->seq_num, as,
bd_config->feature_bitmap & L2INPUT_FEAT_LEARN ?
"on" : "off",
bd_config->feature_bitmap & L2INPUT_FEAT_FWD ?
"on" : "off",
bd_config->feature_bitmap & L2INPUT_FEAT_UU_FLOOD ?
"on" : "off",
bd_config->feature_bitmap & L2INPUT_FEAT_FLOOD ?
"on" : "off",
bd_config->feature_bitmap & L2INPUT_FEAT_ARP_TERM ?
"on" : "off",
format_vnet_sw_if_index_name_with_NA,
vnm, bd_config->bvi_sw_if_index);
vec_reset_length (as);
if (detail || intf)
{
/* Show all member interfaces */
int i;
vec_foreach_index (i, bd_config->members)
{
l2_flood_member_t *member =
vec_elt_at_index (bd_config->members, i);
l2_input_config_t *int_config =
l2input_intf_config (member->sw_if_index);
u32 vtr_opr, dot1q, tag1, tag2;
if (i == 0)
{
vlib_cli_output (vm, "\n%=30s%=7s%=5s%=5s%=5s%=9s%=30s",
"Interface", "If-idx", "ISN", "SHG",
"BVI", "TxFlood", "VLAN-Tag-Rewrite");
}
l2vtr_get (vm, vnm, member->sw_if_index, &vtr_opr, &dot1q,
&tag1, &tag2);
vlib_cli_output (vm, "%=30U%=7d%=5d%=5d%=5s%=9s%=30U",
format_vnet_sw_if_index_name, vnm,
member->sw_if_index, member->sw_if_index,
int_config->seq_num, member->shg,
member->flags & L2_FLOOD_MEMBER_BVI ? "*" :
"-", i < bd_config->flood_count ? "*" : "-",
format_vtr, vtr_opr, dot1q, tag1, tag2);
}
}
if ((detail || arp) &&
(bd_config->feature_bitmap & L2INPUT_FEAT_ARP_TERM))
{
u32 ip4_addr;
ip6_address_t *ip6_addr;
u64 mac_addr;
vlib_cli_output (vm,
"\n IP4/IP6 to MAC table for ARP Termination");
/* *INDENT-OFF* */
hash_foreach (ip4_addr, mac_addr, bd_config->mac_by_ip4,
({
vlib_cli_output (vm, "%=40U => %=20U",
format_ip4_address, &ip4_addr,
format_ethernet_address, &mac_addr);
}));
hash_foreach_mem (ip6_addr, mac_addr, bd_config->mac_by_ip6,
({
vlib_cli_output (vm, "%=40U => %=20U",
format_ip6_address, ip6_addr,
format_ethernet_address, &mac_addr);
}));
/* *INDENT-ON* */
}
}
}
vec_free (as);
if (!printed)
{
vlib_cli_output (vm, "no bridge-domains in use");
}
done:
return error;
}
/*?
* Show a summary of all the bridge-domain instances or detailed view of a
* single bridge-domain. Bridge-domains are created by adding an interface
* to a bridge using the '<em>set interface l2 bridge</em>' command.
*
* @cliexpar
* @parblock
* Example of displaying all bridge-domains:
* @cliexstart{show bridge-domain}
* ID Index Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf
* 0 0 off off off off off local0
* 200 1 on on on on off N/A
* @cliexend
*
* Example of displaying details of a single bridge-domains:
* @cliexstart{show bridge-domain 200 detail}
* ID Index Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf
* 200 1 on on on on off N/A
*
* Interface Index SHG BVI VLAN-Tag-Rewrite
* GigabitEthernet0/8/0.200 3 0 - none
* GigabitEthernet0/9/0.200 4 0 - none
* @cliexend
* @endparblock
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_show_cli, static) = {
.path = "show bridge-domain",
.short_help = "show bridge-domain [bridge-domain-id [detail|int|arp]]",
.function = bd_show,
};
/* *INDENT-ON* */
int
bd_add_del (l2_bridge_domain_add_del_args_t * a)
{
bd_main_t *bdm = &bd_main;
vlib_main_t *vm = bdm->vlib_main;
int rv = 0;
u32 bd_index = bd_find_index (bdm, a->bd_id);
if (a->is_add)
{
if (bd_index != ~0)
return VNET_API_ERROR_BD_ALREADY_EXISTS;
bd_index = bd_add_bd_index (bdm, a->bd_id);
u32 enable_flags = 0, disable_flags = 0;
if (a->flood)
enable_flags |= L2_FLOOD;
else
disable_flags |= L2_FLOOD;
if (a->uu_flood)
enable_flags |= L2_UU_FLOOD;
else
disable_flags |= L2_UU_FLOOD;
if (a->forward)
enable_flags |= L2_FWD;
else
disable_flags |= L2_FWD;
if (a->learn)
enable_flags |= L2_LEARN;
else
disable_flags |= L2_LEARN;
if (a->arp_term)
enable_flags |= L2_ARP_TERM;
else
disable_flags |= L2_ARP_TERM;
if (enable_flags)
bd_set_flags (vm, bd_index, enable_flags, 1 /* enable */ );
if (disable_flags)
bd_set_flags (vm, bd_index, disable_flags, 0 /* disable */ );
bd_set_mac_age (vm, bd_index, a->mac_age);
}
else
{
if (bd_index == ~0)
return VNET_API_ERROR_NO_SUCH_ENTRY;
if (bd_index == 0)
return VNET_API_ERROR_BD_NOT_MODIFIABLE;
if (vec_len (l2input_main.bd_configs[bd_index].members))
return VNET_API_ERROR_BD_IN_USE;
rv = bd_delete (bdm, bd_index);
}
return rv;
}
/**
Create or delete bridge-domain.
The CLI format:
create bridge-domain <bd_index> [learn <0|1>] [forward <0|1>] [uu-flood <0|1>]
[flood <0|1>] [arp-term <0|1>] [mac-age <nn>] [del]
*/
static clib_error_t *
bd_add_del_command_fn (vlib_main_t * vm, unformat_input_t * input,
vlib_cli_command_t * cmd)
{
unformat_input_t _line_input, *line_input = &_line_input;
clib_error_t *error = 0;
u8 is_add = 1;
u32 bd_id = ~0;
u32 flood = 1, forward = 1, learn = 1, uu_flood = 1, arp_term = 0;
u32 mac_age = 0;
l2_bridge_domain_add_del_args_t _a, *a = &_a;
int rv;
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "%d", &bd_id))
;
else if (unformat (line_input, "flood %d", &flood))
;
else if (unformat (line_input, "uu-flood %d", &uu_flood))
;
else if (unformat (line_input, "forward %d", &forward))
;
else if (unformat (line_input, "learn %d", &learn))
;
else if (unformat (line_input, "arp-term %d", &arp_term))
;
else if (unformat (line_input, "mac-age %d", &mac_age))
;
else if (unformat (line_input, "del"))
{
is_add = 0;
flood = uu_flood = forward = learn = 0;
}
else
break;
}
if (bd_id == ~0)
{
error = clib_error_return (0, "bridge-domain-id not specified");
goto done;
}
if (bd_id == 0)
{
error = clib_error_return (0, "bridge domain 0 can not be modified");
goto done;
}
if (mac_age > 255)
{
error = clib_error_return (0, "mac age must be less than 256");
goto done;
}
memset (a, 0, sizeof (*a));
a->is_add = is_add;
a->bd_id = bd_id;
a->flood = (u8) flood;
a->uu_flood = (u8) uu_flood;
a->forward = (u8) forward;
a->learn = (u8) learn;
a->arp_term = (u8) arp_term;
a->mac_age = (u8) mac_age;
rv = bd_add_del (a);
switch (rv)
{
case 0:
if (is_add)
vlib_cli_output (vm, "bridge-domain %d", bd_id);
break;
case VNET_API_ERROR_BD_IN_USE:
error = clib_error_return (0, "bridge domain in use - remove members");
goto done;
case VNET_API_ERROR_NO_SUCH_ENTRY:
error = clib_error_return (0, "bridge domain id does not exist");
goto done;
case VNET_API_ERROR_BD_NOT_MODIFIABLE:
error = clib_error_return (0, "bridge domain 0 can not be modified");
goto done;
default:
error = clib_error_return (0, "bd_add_del returned %d", rv);
goto done;
}
done:
unformat_free (line_input);
return error;
}
/*?
* Create/Delete bridge-domain instance
*
* @cliexpar
* @parblock
* Example of creating bridge-domain 1:
* @cliexstart{create bridge-domain 1}
* bridge-domain 1
* @cliexend
*
* Example of creating bridge-domain 2 with enabling arp-term, mac-age 60:
* @cliexstart{create bridge-domain 2 arp-term 1 mac-age 60}
* bridge-domain 2
*
* vpp# show bridge-domain
* ID Index BSN Age(min) Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf
* 0 0 0 off off off off off off local0
* 1 1 0 off on on off on off N/A
* 2 2 0 60 on on off on on N/A
*
* @cliexend
*
* Example of delete bridge-domain 1:
* @cliexstart{create bridge-domain 1 del}
* @cliexend
* @endparblock
?*/
/* *INDENT-OFF* */
VLIB_CLI_COMMAND (bd_create_cli, static) = {
.path = "create bridge-domain",
.short_help = "create bridge-domain <bridge-domain-id>"
" [learn <0|1>] [forward <0|1>] [uu-flood <0|1>] [flood <0|1>] [arp-term <0|1>]"
" [mac-age <nn>] [del]",
.function = bd_add_del_command_fn,
};
/* *INDENT-ON* */
/*
* fd.io coding-style-patch-verification: ON
*
* Local Variables:
* eval: (c-set-style "gnu")
* End:
*/