| # Copyright (c) 2020 Cisco and/or its affiliates. |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at: |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| DPDK_PKTMBUF_HEADROOM ?= 128 |
| DPDK_USE_LIBBSD ?= n |
| DPDK_DEBUG ?= n |
| DPDK_TAP_PMD ?= n |
| DPDK_FAILSAFE_PMD ?= n |
| DPDK_MACHINE ?= default |
| DPDK_MLX_IBV_LINK ?= static |
| |
| dpdk_version ?= 24.03 |
| dpdk_base_url ?= http://fast.dpdk.org/rel |
| dpdk_tarball := dpdk-$(dpdk_version).tar.xz |
| dpdk_tarball_md5sum_24.03 := a98da848d6ba09808ef00f9a26aaa49a |
| dpdk_tarball_md5sum_23.11 := 896c09f5b45b452bd77287994650b916 |
| dpdk_tarball_md5sum_23.07 := 2b6d57f077585cb15b885482362fd47f |
| dpdk_tarball_md5sum_23.03 := 3cf8ebbcd412d5726db230f2eeb90cc9 |
| dpdk_tarball_md5sum_22.11.1 := 0594708fe42ce186a55b0235c6e20cfe |
| dpdk_tarball_md5sum_22.07 := fb73b58b80b1349cd05fe9cf6984afd4 |
| dpdk_tarball_md5sum_22.03 := a07ca8839f98062f46e1cc359735cce8 |
| dpdk_tarball_md5sum_21.11 := 58660bbbe9e95abce86e47692b196555 |
| dpdk_tarball_md5sum := $(dpdk_tarball_md5sum_$(dpdk_version)) |
| dpdk_url := $(dpdk_base_url)/$(dpdk_tarball) |
| dpdk_tarball_strip_dirs := 1 |
| ifeq ($(shell uname), FreeBSD) |
| dpdk_depends := $(if $(ARCH_X86_64), ipsec-mb) |
| else |
| dpdk_depends := rdma-core $(if $(ARCH_X86_64), ipsec-mb) |
| endif |
| DPDK_MLX_DEFAULT := $(shell if grep -q "rdma=$(rdma-core_version) dpdk=$(dpdk_version)" mlx_rdma_dpdk_matrix.txt; then echo 'y'; else echo 'n'; fi) |
| DPDK_MLX4_PMD ?= $(DPDK_MLX_DEFAULT) |
| DPDK_MLX5_PMD ?= $(DPDK_MLX_DEFAULT) |
| DPDK_MLX5_COMMON_PMD ?= $(DPDK_MLX_DEFAULT) |
| # Debug or release |
| |
| DPDK_BUILD_TYPE:=release |
| ifeq ($(DPDK_DEBUG), y) |
| DPDK_BUILD_TYPE:=debug |
| endif |
| |
| DPDK_DRIVERS_DISABLED := baseband/\*, \ |
| bus/dpaa, \ |
| bus/ifpga, \ |
| common/cnxk, \ |
| compress/isal, \ |
| compress/octeontx, \ |
| compress/zlib, \ |
| crypto/ccp, \ |
| crypto/cnxk, \ |
| crypto/dpaa_sec, \ |
| crypto/openssl, \ |
| crypto/aesni_mb, \ |
| crypto/aesni_gcm, \ |
| crypto/kasumi, \ |
| crypto/snow3g, \ |
| crypto/zuc, \ |
| event/\*, \ |
| mempool/dpaa, \ |
| mempool/cnxk, \ |
| net/af_packet, \ |
| net/bnx2x, \ |
| net/bonding, \ |
| net/cnxk, \ |
| net/ipn3ke, \ |
| net/liquidio, \ |
| net/pcap, \ |
| net/pfe, \ |
| net/sfc, \ |
| net/softnic, \ |
| net/thunderx, \ |
| raw/ifpga, \ |
| net/af_xdp |
| |
| DPDK_LIBS_DISABLED := acl, \ |
| bbdev, \ |
| bitratestats, \ |
| bpf, \ |
| cfgfile, \ |
| cnxk, \ |
| distributor, \ |
| efd, \ |
| fib, \ |
| flow_classify, \ |
| graph, \ |
| gro, \ |
| gso, \ |
| jobstats, \ |
| kni, \ |
| latencystats, \ |
| lpm, \ |
| member, \ |
| node, \ |
| pipeline, \ |
| port, \ |
| power, \ |
| rawdev, \ |
| rib, \ |
| table |
| |
| DPDK_MLX_CONFIG_FLAG := |
| |
| # Adjust disabled pmd and libs depending on user provided variables |
| ifeq ($(DPDK_MLX4_PMD), n) |
| DPDK_DRIVERS_DISABLED += ,net/mlx4 |
| else |
| DPDK_MLX_CONFIG_FLAG := -Dibverbs_link=${DPDK_MLX_IBV_LINK} |
| endif |
| ifeq ($(DPDK_MLX5_PMD), n) |
| DPDK_DRIVERS_DISABLED += ,net/mlx5 |
| else |
| DPDK_MLX_CONFIG_FLAG := -Dibverbs_link=${DPDK_MLX_IBV_LINK} |
| endif |
| ifeq ($(DPDK_MLX5_COMMON_PMD), n) |
| DPDK_DRIVERS_DISABLED += ,common/mlx5 |
| else |
| DPDK_MLX_CONFIG_FLAG := -Dibverbs_link=${DPDK_MLX_IBV_LINK} |
| endif |
| ifeq ($(DPDK_TAP_PMD), n) |
| DPDK_DRIVERS_DISABLED += ,net/tap |
| endif |
| ifeq ($(DPDK_FAILSAFE_PMD), n) |
| DPDK_DRIVERS_DISABLED += ,net/failsafe |
| endif |
| |
| # Sanitize DPDK_DRIVERS_DISABLED and DPDK_LIBS_DISABLED |
| DPDK_DRIVERS_DISABLED := $(shell echo $(DPDK_DRIVERS_DISABLED) | tr -d '\\\t ') |
| DPDK_LIBS_DISABLED := $(shell echo $(DPDK_LIBS_DISABLED) | tr -d '\\\t ') |
| |
| SED=sed |
| ifeq ($shell(uname), FreeBSD) |
| SED=gsed |
| endif |
| |
| HASH := \# |
| # post-meson-setup snippet to alter rte_build_config.h |
| define dpdk_config |
| if grep -q RTE_$(1) $(dpdk_src_dir)/config/rte_config.h ; then \ |
| $(SED) -i -e 's/$(HASH)define RTE_$(1).*/$(HASH)define RTE_$(1) $(DPDK_$(1))/' \ |
| $(dpdk_src_dir)/config/rte_config.h; \ |
| elif grep -q RTE_$(1) $(dpdk_build_dir)/rte_build_config.h ; then \ |
| $(SED) -i -e 's/$(HASH)define RTE_$(1).*/$(HASH)define RTE_$(1) $(DPDK_$(1))/' \ |
| $(dpdk_build_dir)/rte_build_config.h; \ |
| else \ |
| echo '$(HASH)define RTE_$(1) $(DPDK_$(1))' \ |
| >> $(dpdk_build_dir)/rte_build_config.h ; \ |
| fi |
| endef |
| |
| define dpdk_config_def |
| if [[ "$(DPDK_$(1))" == "y" ]]; then \ |
| if ! grep -q "RTE_$(1)" $(dpdk_build_dir)/rte_build_config.h \ |
| $(dpdk_src_dir)/config/rte_config.h ; then \ |
| echo '$(HASH)define RTE_$(1) 1' \ |
| >> $(dpdk_build_dir)/rte_build_config.h ; \ |
| fi; \ |
| elif [[ "$(DPDK_$(1))" == "n" ]]; then \ |
| $(SED) -i '/$(HASH)define RTE_$(1) .*/d' $(dpdk_build_dir)/rte_build_config.h \ |
| $(dpdk_src_dir)/config/rte_config.h ; \ |
| fi |
| endef |
| |
| DPDK_MESON_ARGS = \ |
| --default-library static \ |
| --libdir lib \ |
| --prefix $(dpdk_install_dir) \ |
| -Dtests=false \ |
| -Denable_driver_sdk=true \ |
| "-Ddisable_drivers=$(DPDK_DRIVERS_DISABLED)" \ |
| "-Ddisable_libs=$(DPDK_LIBS_DISABLED)" \ |
| -Db_pie=true \ |
| -Dmachine=$(DPDK_MACHINE) \ |
| --buildtype=$(DPDK_BUILD_TYPE) \ |
| -Denable_kmods=false \ |
| ${DPDK_MLX_CONFIG_FLAG} |
| |
| PIP_DOWNLOAD_DIR = $(CURDIR)/downloads/ |
| |
| define dpdk_config_cmds |
| cd $(dpdk_build_dir) && \ |
| echo "DPDK_MLX_DEFAULT=$(DPDK_MLX_DEFAULT)" > ../../../dpdk_mlx_default.sh && \ |
| rm -rf ../dpdk-meson-venv && \ |
| mkdir -p ../dpdk-meson-venv && \ |
| python3 -m venv ../dpdk-meson-venv && \ |
| source ../dpdk-meson-venv/bin/activate && \ |
| (if ! ls $(PIP_DOWNLOAD_DIR)meson* ; then pip3 download -d $(PIP_DOWNLOAD_DIR) -f $(DL_CACHE_DIR) meson==0.55.3 setuptools wheel pyelftools; fi) && \ |
| pip3 install --no-index --find-links=$(PIP_DOWNLOAD_DIR) meson==0.55.3 pyelftools && \ |
| PKG_CONFIG_PATH=$(dpdk_install_dir)/lib/pkgconfig meson setup $(dpdk_src_dir) \ |
| $(dpdk_build_dir) \ |
| $(DPDK_MESON_ARGS) \ |
| | tee $(dpdk_config_log) && \ |
| deactivate && \ |
| echo "DPDK post meson configuration" && \ |
| echo "Altering rte_build_config.h" && \ |
| $(call dpdk_config,PKTMBUF_HEADROOM) && \ |
| $(call dpdk_config_def,USE_LIBBSD) |
| endef |
| |
| ifeq ("$(DPDK_VERBOSE)","1") |
| DPDK_VERBOSE_BUILD = --verbose |
| endif |
| |
| define dpdk_build_cmds |
| cd $(dpdk_build_dir) && \ |
| source ../dpdk-meson-venv/bin/activate && \ |
| meson compile $(DPDK_VERBOSE_BUILD) -C . | tee $(dpdk_build_log) && \ |
| deactivate |
| endef |
| |
| define dpdk_install_cmds |
| cd $(dpdk_build_dir) && \ |
| source ../dpdk-meson-venv/bin/activate && \ |
| meson install && \ |
| cd $(dpdk_install_dir)/lib && \ |
| echo "GROUP ( $$(ls librte*.a ) )" > libdpdk.a && \ |
| rm -rf librte*.so librte*.so.* dpdk/*/librte*.so dpdk/*/librte*.so.* && \ |
| deactivate |
| endef |
| |
| $(eval $(call package,dpdk)) |